Wildlife Protection Products

© Jerry Liguori

© Jerry Liguori
Wildlife Protection and Deterrent Hardware Solutions

2
1

7
8

4 6
3

6
5
7

3 8
8

10
9
6 6 5

Solutions Key
Protect Divert

1. RAPTOR PROTECTOR™ 2. RAPTOR PROTECTOR™ 6. BIRD-FLIGHT™ 7. RAPTOR CLAMP™ 8. OWL Diverters

Dead-End Cover Diverters Diverters

3. Bushing Covers 4. Protector Tubing 5. POLE PLUG 9. SWAN-FLIGHT™ Diverters 10. BIRD PERCH Deterrent
Wildlife Protection Products

Table of Contents

PROTECT

RAPTOR PROTECTORTM ........................................................................4

Bushing Covers .........................................................................................9

Protector Tubing ....................................................................................... 11

POLE PLUGS .......................................................................................... 12

DIVERT

BIRD-FLIGHTTM Diverters........................................................................ 14

SWAN-FLIGHTTM Diverters...................................................................... 16

RAPTOR CLAMPTM Diverters .................................................................. 18

Overhead Warning Light (OWL) Diverters ............................................... 18

RAPTOR CLAMPTM LED Diverters .......................................................... 18

BIRD PERCH Deterrent...........................................................................20

 Wildlife Protection

With the power grid expansion across the globe, the impact on wildlife populations became
evident. As migratory bird collisions with power lines and other wildlife interactions with power
equipment increased, Preformed Line Products worked with the Power Companies to develop
product solutions to mitigate wildlife interactions.

Preformed Line Products (PLP) is committed to protecting wildlife by working with the
Utility Companies to design and manufacture wildlife protection products that aid in reduc-
ing wildlife mortalities from interaction with power lines, structures and equipment.

Power Reliability
Wildlife-related outages impact power reliability, a key metric in the industry. Wildlife
interactions is one of the top causes of power loss, behind Mother Nature and equipment
failures. Loss of power by wildlife is estimated to cost the Utility companies millions in
revenue in cost of repair, customer outages and regulatory fines.

Preformed Line Products is committed to improving power reliability by working with the
Utility Companies to develop and deliver wildlife protection products that aid in reducing
outages caused by wildlife.

2
 PROTECT

PROTECT wildlife from incidental electrocution by covering critical electrical components.

Did you
know that nearly
10% of power outages
are caused by wildlife
© Jerry Liguori
interactions with
Did you know
power lines or
that the Migratory
equipment?
Bird Treaty Act requires
utilities to protect against
injuring or killing endan-
gered species like the
Bald Eagle?

3
 RAPTOR PROTECTOR TM

© Jerry Liguori

PLP’s RAPTOR PROTECTOR COVER

(RPC) is designed to provide protec-

tion from incidental avian contact with

overhead distribution lines. It provides

an economical means of reducing bird

fatalities and line outages. It is easily

installed over single or double pin/post

tie top C, F, and J Neck insulators and

on conductors up to 1.10". For double pin

insulators, the RPC can accommodate

6.5" – 22" center to center distances.

The heavy angle RPC can be used on

angles up to 30°. The horizontal trunnion

and vertical trunnion are available for

vise top and trunnion style insulators.

4
 RAPTOR PROTECTOR TM

4 Styles
Tangent

Vertical Trunnion

Articulating Angle

Horizontal Trunnion

Features
n Lightweight
n Fully UV Stabilized Application
n Long service life without n Installs on single insulator in seconds
deterioration of material
n Easily installed by hand or hot stick
n 35 kV dielectric strength
n Designed to ensure a positive lock on conductor
n Low profile
n Modifiable for use on double cross arm construction
n Unobtrusive appearance
n Covers available for C, F, J-Neck, Vise Top and Trunnion
n Minimized wind loading style insulators
RAPTOR PROTECTOR
Diameter Overall
PLP Catalog Max. Line
Description Range Length Color
Number Angle
(in) Max. (in)
Tangent Cover
RPC-0800-S 42" Black
RPC-0800 80" Black
Tangent Cover 1.10 10°
RPC-0801-S 42" Gray
RPC-0801 80" Gray
Heavy Angle
RPC-0810-S 42" Black
RPC-0810 80" Black
Heavy Angle 1.10 30°
RPC-0811-S 42" Gray
RPC-0811 80" Gray
Horizontal Trunnion
RPC-0820-S 42" Black
RPC-0820 80" Black
Horizontal Trunnion 1.25 10°
RPC-0821-S 42" Gray
RPC-0821 80" Gray
Vertical Trunnion
RPC-0830-S 42" Black
RPC-0830 80" Black
Vertical Trunnion 1.25 10°
RPC-0831-S 42" Gray
RPC-0831 80" Gray
Four pins (RPP-0840) included with each kit. Contact PLP for other available options.
NOTE: The RAPTOR PROTECTOR is not a completely insulating covering and should not be used to protect
humans from electrical shock. 5
 RAPTOR PROTECTOR TM

Dead-End Cover

The RAPTOR PROTECTOR Dead-

End Cover is designed to provide
protection from incidental avian
contact with overhead distribution
lines. It provides an economical
means of reducing bird fatalities and
line outages while being easily in-
stalled over Dead-end terminations.

The RAPTOR PROTECTOR Dead-

End Cover is lightweight, offers little
wind resistance and is easily and
quickly installed by hand or by hot
stick. It is designed to remain in its
applied location and will not move
along the conductor under Aeolian
vibration or other motion. This product
comes with a pigtail attachment to
hold the cover in place over the The RAPTOR PROTECTOR is manu-
termination and an anti-lift block to factured from low density polyethylene
keep the RAPTOR PROTECTOR (LLDPE) possessing excellent environ-
Dead-End Cover on the termination. mental stress crack resistance and is
fully UV stabilized.

6
 RAPTOR PROTECTOR TM

Dead-End Cover

Features
n Lightweight

n Low profile

n Unobtrusive appearance n Quick modification for a custom fit

n Covers a wide range of conductors and n Two cover sizes accommodate large
dead-end hardware and small configurations of
dead-end hardware
n Long service life without deterioration of material
n Lift prevention block keeps the cover
n 35 kV dielectric strength shell from lifting off the conductor
and hardware
n Easily installed by hand or hot stick
n Patented
n Includes pigtail and lift prevention block

n Fully UV Stabilized

n Low temperature impact resistant

n Installs on conductor and over

dead-end configuration in seconds

RAPTOR PROTECTOR Dead-end SMALL RAPTOR PROTECTOR Dead-end LARGE

Overall Overall
PLP Catalog Range PLP Catalog Range
Length Color Length Color
Number (in) Number (in)
(in) (in)

RPC-0850B-0295 Black RPC-0860B-0730 Black

30" .175 - .295" 30" .541 - .730"
RPC-0850G-0295 Gray RPC-0860G-0730 Gray

RPC-0850B-0400 Black RPC-0860B-0920 Black

30" .296 - .400" 30" .731 - .920"
RPC-0850G-0400 Gray RPC-0860G-0920 Gray

RPC-0850B-0540 Black RPC-0860B-1100 Black

30" .401 - .540" 30" .921 - 1.100"
RPC-0850G-0540 Gray RPC-0860G-1100 Gray

RPC-0850B-0730 Black RPC-0860B-1300 Black

30" .541 - .730" 30" 1.101 - 1.300"
RPC-0850G-0730 Gray RPC-0860G-1300 Gray

Contact PLP for other available options.

NOTE: The RAPTOR PROTECTOR is not a completely insulating covering and should not be used to protect
humans from electrical shock. 7
 RAPTOR PROTECTOR TM

Accessories for Applications

Double Insulator
Application

Round Eye Lock Pins

Hot Stick Application

8
 BUSHING COVERS

Prevent outages and protect wildlife with

PLP’s Bushing Covers. The Bushing

Covers are designed to reduce the number

of outages experienced on the utility’s

distribution system by insulating transformer

bushings, lighting arrestors, capacitors and

switching equipment from incidental contact

by various animals.

PLP Bushing Covers are made from a light

gray, high dielectric, plastisol compound that

is a minimum of 100 mils thick. This material

contains ultraviolet stabilizers and fungicides

and has a dielectric strength of 240 V/mil.

Plastisol guards are secured to the bushings separates energized components from
of transformers or similar equipment so that grounded components in areas open to
the energized components are covered for a animal contact.
reasonable distance or the insulating medium

9
 BUSHING COVERS

Features
n Lightweight

n One-piece design
WP-CSP
n Installed in seconds
by hand

n Variety of shapes
for various transformer
configurations

n Modifiable for larger/ WP-17T WP-10T

WP-2.25F WP-11S
smaller stinger wires

WILDLIFE PROTECTORS
Tap Wire
PLP Catalog Carton Height Width Length
Description Opening
Number Quantity (in) (in) (in)
(in)
Single bushing transformer
and capacitor. Covers a
maximum of 7.5" of tap wire.
WP-10T 25 11.75 3.75 3.75 up to 0.75
Locating tabs hold the
guard on the first skirt
of the insulator.
Single bushing transformer
and capacitor. Covers a
maximum of 12.5" of tap
WP-17T 25 17.00 3.75 3.75 up to 0.75
wire. Locking tabs hold
the guard on the first skirt
of the insulator.
Existing tap retrofit. Apply
through slit edge and hold
WP-11S 25 11.00 3.50 3.50 0.40
guard in place with the
fasteners provided.
Completely Self-Protected
(CSP) transformers.
Designed as retrofit.
WP-CSP 25 8.75 3.50 12.25 0.40
Designed to protect both
primary bushing and
lighting arrestor.
Single bushing transformer.
Covers 2.25" OD current
limiting fuse bolted to bush-
ing. Bottom of the double
WP-2.25F 25 12.75 3.75 3.75 cut as needed
dipped tip indicates point of
install for fuse. Locking tabs
hold guard on first skirt of
the insulator.
10
 PROTECTOR TUBING

Protector Tubing protects

energized lines from faults due
to incidental contact caused by various
types of wildlife. The durable EPDM
tubing is a minimum of 125 mils thick
with a dielectric strength of 500 V/mil
and has excellent resistance to ozone
and petroleum based solvents.
PROTECTOR TUBING

n Tubing slit configuration permits easy PLP Catalog Conductor Range Length (ft)
installation on existing conductor Number
Min. (in) Max. (in) L
PT-0375 0.162 0.375 8
n Overlapping profile follows bends
PT-0625 0.376 0.625 8
and turns in the conductor without
PT-0938 0.626 0.938 8
risk of splitting open exposing
PT-1300 0.939 1.300 8
energized wire

n New profile provides

for a wider ranging of
conductor applications

n Ideal for transformer stinger

wires and arrestor connections to
prevent the electrocution of birds
of prey
n Available in continuous rolls.
Contact PLP with your requirements.

n Not for the protection of human contact

11
 POLE PLUG

The POLE PLUG is designed to close Features

existing holes in steel and compos- n Fully UV stabilized n Eliminate/reduce insect
or wildlife infestation
ite utility poles or other equipment. n Resistant to environmental
stress cracking n Covers a wide
Closing unused holes reduces or range of hole diameters
n Installs in seconds
eliminates whistling due to the wind. n Long service life without
n Can be installed with standard material deterioration
The plug also provides an economi- hot stick tools if required
cal means of reducing the incidents of n Compatible with steel or
n Positive snap in lock composite poles with wall
insect infestations. This can drastically thickness of 1/4" (9/16" to
n One piece design 1-1/8" diameter), 3/8" or
reduce injury to lineman and loss less (1/2" diameter), or
n Lightweight
1/2" or less (3" diameter)
of productivity.
n Eliminate/reduce pole whistling

POLE PLUG POLE PLUG

PLP Catalog Hole Size PLP Catalog Hole Size

Color Color
Number (in) Number (in)

PP-0625B 9/16" and Black PP-1125B Black

1-1/8"
PP-0625G 5/8" Gray PP-1125G Gray
PP-0750B 11/16" and Black PP-1250B Black
1-1/4"
PP-0750G 3/4" Gray PP-1250G Gray
PP-0813B Black PP-1375B Black
13/16" 1-3/8"
PP-0813G Gray PP-1375G Gray
PP-0875B 7/8" and Black PP-1500B Black
1-1/2"
PP-0875G 15/16" Gray PP-1500G Gray
PP-1000B Black PP-3000B Black
1" 3"
PP-1000G Gray PP-3000G Gray

12
 DIVERT
DIVERT where power lines intersect with migratory bird paths.

Divert Avian flight

patterns over
distribution and
transmission lines by
making the lines
more visible.

BIRD-FLIGHTTM Diverter

Overhead Warning Light

(OWL)

RAPTOR CLAMPTM
Diverters

SWAN-FLIGHTTM Diverter

13
 BIRD-FLIGHT Diverter
TM

The BIRD-FLIGHT Diverter (BFD)

is designed to make overhead lines
and guyed structures visible to birds
and provides an economical means
of reducing the hazard to both lines
and birds. For low and medium voltage
construction, the BFD is applied to the
phase conductors (bare or jacketed).
For high voltages, it is typically used
on the shield wire.

The BIRD-FLIGHT Diverter is light- The plastic BFD is manufac- and salt water can not
weight, offers little wind resistance and tured from rigid high impact seriously degrade the
is easily and quickly applied by hand polyvinyl chloride (PVC) pos- properties of rigid PVC.
or by hot stick. The positive grip on the sessing excellent chemical
The Aluminum BFD is
conductor is designed to ensure that resistance and tensile strength
manufactured from a
the BFD remains in the applied properties. The BFD will retain
high strength, corrosive
position and cannot move along the good physical characteristics
resistant aluminum alloy
span under Aeolian vibration or other over a range of extreme
material. It is designed
motion. The diverter section increases temperatures. Aging tests
for use on conductors
the visible profile of the cable or confirm that the material
operated at elevated
conductor to a degree necessary to does not deteriorate in
temperatures (up to
alert wildlife, but avoids an undesirably function or appearance from
250˚C).
bulky outline and increased loading the effects of severe weather
on the line. conditions. Industrial fumes
14
 BIRD-FLIGHT Diverter
TM

BIRD-FLIGHT Diverters are designed to offer the following advantages:

n Increased conductor/strand profile

to enhance visibility where
bird flight paths are present

n Economical and easily applied

n Lightweight

n No moving parts to wear out

n Long service life without deterioration of High Temperature

material properties BIRD-FLIGHT™ Diverter

n Minimal wind resistance

n Manufactured from gray or yellow high

impact PVC with UV protection (Contact
PLP for other color/voltage options).

For use on: Bare and Jacketed Conductors and Strand

Overall Outer
Catalog Catalog Conductor Range Length Diameter of
Number Number inches (mm) inches Diverter Coil Color
(YELLOW) (GRAY) Min Max (mm) inches (mm) Code
BFD-MS-3331 BFD-MS-3346 .175 (4.4) .249 (6.3) 8.00 (203) 2.25 (57) Black
BFD-MS-3155 BFD-MS-2921 .250 (6.4) .349 (8.9) 8.50 (216) 2.50 (64) Blue
BFD-MS-3164 BFD-MS-3355 .350 (8.9) .449 (11.4) 9.50 (241) 2.75 (70) Brown
BFD-MS-11135 BFD-MS-11060 .350 (8.9) .449 (11.4) 12.37 (314) 4.25 (108) Brown
BFD-MS-3341 BFD-MS-3366 .450 (11.4) .599 (15.2) 14.50 (368) 4.25 (108) Green
BFD-MS-3344 BFD-MS-3371 .600 (15.2) .770 (19.6) 17.00 (432) 4.25 (108) Purple
BFD-MS-3345 BFD-MS-3376 .771 (19.6) .858 (21.8) 15.00 (381) 4.25 (108) Red
BFD-MS-3405 BFD-MS-11699 .859 (21.8) .942 (23.9) 16.50 (419) 4.50 (114) Orange
BFD-MS-11111 BFD-MS-12290 .971 (24.7) 1.121 (28.5) 15.50 (394) 5.13 (130) Pink
High Temperature BIRD-FLIGHT™ Diverter
BFD-MS-11543 0.800 0.850 26.00 4.00 Pink
BFD-MS-12679 1.100 1.150 37.00 4.00 Purple
Aluminum
BFD-MS-12645 1.300 1.350 43.00 4.00 Red
BFD-MS-12687 1.565 1.635 54.00 4.00 Black
15
 SWAN-FLIGHT Diverter
TM

The Preformed Line Products SWAN-

FLIGHT Diverter (SFD) is designed
for use on conductor/strand to create
greater visibility for avian flight paths
on overhead lines and tower down
guys. Offering little wind resistance,
the SFD reduces hazards to both
lines and birds. For construction up
to 230kV, the SFD can be applied to
phase conductors (bare or jacketed).
For EHV voltages, it is typically
installed on the shield wire. The SWAN-FLIGHT Diverter in function or appearance
(SFD) is manufactured from from the effects of severe
The SWAN-FLIGHT Diverter is light-
rigid high impact polyvinyl weather conditions.
weight, offers little wind resistance
chloride (PVC) possessing Industrial fumes and
and is easily and quickly applied. The
excellent chemical resistance salt water cannot
positive grip on the conductor ensures
and tensile strength proper- seriously degrade the
that the SFD remains in the applied
ties. The SFD will retain properties of rigid PVC.
location and cannot move along the
good physical characteristics For application on phase
span under Aeolian vibration or other
over a range of extreme conductors above 345kV,
motion. The diverter section increases
temperatures. contact PLP for
the visible profile of the cable to a
recommendations.
degree necessary to alert wildlife, but Aging tests confirm the
avoids an undesirably bulky outline material does not deteriorate
and increased loading on the line.

16
 SWAN-FLIGHT Diverter
TM

Features: Spacing:
n Increased conductor profile to provide For optimal results, spacing distances are
increased visibility where large, slow generally recommended at 15' intervals,
moving bird flight paths are present depending upon local conditions. Since
n Economical and easily applied wind resistance is very limited, sufficient
SWAN-FLIGHT Diverters can be used to
n Lightweight ensure adequate visibility without creating
stresses on the line. When marking adja-
n Long service life without deterioration
of material properties cent spans, overall visibility is improved
by staggering the placement between
n Minimal wind resistance the spans.
n Manufactured from gray or yellow high
impact PVC with UV protection

SWAN-FLIGHT Diverter - Product Data

Conductor Range (Inches) Overall Diameter of Diameter of Approx.

PLP Catalog Color
Length Diverter Coil PVC Rod Weight
Number Code
Min Max (Inches) (Inches) (Inches) (lbs)

SFD-0445 0.175 0.249 20 7.0 0.375 0.40 Black

SFD-0635 0.250 0.349 23 7.0 0.375 0.46 Blue

SFD-0890 0.350 0.449 25 7.5 0.375 0.50 Brown

SFD-1140 0.450 0.599 35 8.0 0.375 0.70 Green

SFD-1520 0.600 0.770 38 8.0 0.500 1.40 Purple

SFD-1960 0.771 0.858 38 8.0 0.500 1.40 Red

SFD-2220 0.859 0.942 40 8.0 0.500 1.50 Orange

SFD-2460 0.943 1.121 40 8.0 0.500 1.50 Pink

SFD-2700 1.122 1.306 40 8.0 0.500 2.00 Gray*

SFD-3035 1.307 1.530 46 8.0 0.500 2.00 Black

*Gray is the standard color. For yellow, add “-Y” after the catalog number.
Add suffix –B to the catalog number for black semi-conductive layer for applications @ 230kV (i.e.: SFD-2460-B).
The SWAN-FLIGHT Diverter should not be applied on phase conductors energized at voltages of 345kV and above. 17
 RAPTOR CLAMPTM Diverter, OWL and
RAPTOR CLAMPTM LED Diverter

The RAPTOR CLAMPTM Diverter

and OWL are alternatives to the
BIRD-FLIGHT Diverter and the SWAN-
FLIGHT Diverter in making overhead
power lines visible to birds of all sizes.
They provide cost beneficial means of
reducing hazards to both power lines
and birds. For low and medium voltage
RAPTOR CLAMPTM
construction up to 40 kV, they can be
Diverter
applied to phase conductors (bare or
jacketed). For higher voltages, they
are usually installed on the overhead
shield wire.

The yellow flapper is injection molded,

UV stabilized plastic, while the attach-
OWL
ment clamp is constructed of high
strength UV stabilized engineered
composite plastic for maximum
strength and clamping force. All
fasteners and springs are grade
316 stainless steel.

RAPTOR CLAMPTM
LED Diverter

18
 RAPTOR CLAMPTM Diverter, and OWL

RAPTOR CLAMP Diverter, RAPTOR CLAMP LED Diverter and OWL

PLP Catalog Diameter Range (In)

Weight
Number
Min Max (lbs)

RAPTOR-Y 0.1 1.5 0.40

RAPTOR-LED 0.1 1.5 1.10

OWL-0445 0.175 0.249 1.10

OWL-0635 0.250 0.349 1.10

OWL-0890 0.350 0.449 1.20

OWL-1140 0.450 0.599 1.70

OWL-1520 0.600 0.700 1.70

19
 BIRD PERCH Deterrent

The BIRD PERCH Deterrent (BPD) is

designed to eliminate roosting areas
on structures that are electrocution
hazards or over equipment to keep
it free from bird contamination. BIRD
PERCH Deterrents provide an
economical means of reducing avian
fatalities, line outages and equipment
flashovers while being easily installed
over the structural support.

The BIRD PERCH Deterrent is light- temperatures. Industrial fumes and salt
weight, offers little wind resistance and water won’t degrade these properties.
is quickly installed without the need for
A minimum of two BIRD PERCH
attachment hardware. The deterrents
Deterrent’s are required to ensure
are designed to lock into place, pre-
proper application. Each has approxi-
venting any movement on the structure.
mately an 8" spacing between the
The BIRD PERCH Deterrent is manu-
uprights. To calculate the number of
factured from outdoor grade polyvinyl
BIRD PERCH Deterrents required,
chloride (PVC) possessing excellent
measure the distance to be covered
chemical resistance and strength
and divide by 8".
properties and will retain good physical
characteristics over a range of extreme

20
 BIRD PERCH Deterrent

Inverted Angle Angle Davit Arm I-Beam

BIRD PERCH Deterrent

PLP Crossarm Dimensions Carton
Catalog Description
Number w x h Inches (cm) Qty
3.25"w x 4.25"h
BPD-XARM BIRD PERCH Deterrent Crossarm 16
(8.3 x 10.8 cm)
2"w x 2"h
BPD-A22 BIRD PERCH Deterrent Angle 24
(5.0 x 5.0 cm)
2"w x 2"h
BPD-IA22 BIRD PERCH Deterrent Inverted Angle 24
(5.0 x 5.0 cm)
2.5"w x 2.5"h
BPD-A25 BIRD PERCH Deterrent Angle 24
(6.3 x 6.3 cm)
2.5"w x 2.5"h
BPD-IA25 BIRD PERCH Deterrent Inverted Angle 24
(6.3 x 6.3 cm)
2"w x 2.5"h
BPD-A225 BIRD PERCH Deterrent Angle 24
(5.0 x 6.3 cm)
2"w x 2.5"h
BPD-IA225 BIRD PERCH Deterrent Inverted Angle 24
(5.0 x 6.3 cm)
6"w x 6"h
BPD-W6I BIRD PERCH Deterrent I-Beam 16
(15.2 x 15.2 cm)
10"w x 10"h
BPD-W10I BIRD PERCH Deterrent I-Beam 16
(25.4 x 25.4 cm)
6"w x 4"h
BPD-HD64 BIRD PERCH Deterrent Heavy Duty Crossarm 16
(15.2 x 10.2 cm)
5"w x 5"h
BPD-HD55 BIRD PERCH Deterrent Heavy Duty Crossarm 16
(12.7 x 12.7 cm)
BPD-DAVIT BIRD PERCH Deterrent Davit Arm Universal 24
3-1/2"w x 8-1/2"h
BPD-HD3585 BIRD PERCH Deterrent Heavy Duty Crossarm 16
(8.8 x 8.8 cm)
5-3/4"w x 7-3/4"h
BPD-HD5777 BIRD PERCH Deterrent Heavy Duty Crossarm 16
(14.6 x 14.6 cm)
NOTE: BIRD PERCH Deterrent’s should not be used if nesting of large birds is prevalent.
21
Yellow versions are available – contact PLP.
 APPLICATION PROCEDURES

FEATURED PRODUCTS:

SP3065 RAPTOR PROTECTOR™ for Single & Double Insulator Supports

SP3203 RAPTOR PROTECTOR™ Articulating Angle

SP3155 RAPTOR PROTECTOR™ Horizontal Trunnion

SP3156 RAPTOR PROTECTOR™ Vertical Trunnion

SP3204 RAPTOR PROTECTOR™ Dead-end Cover

SP2805 BIRD-FLIGHT™ Diverters

SP3053 BIRD-FLIGHT™ Aluminum Diverters

SP3081 SWAN-FLIGHT™ Diverters

SP3143 BIRD PERCH Deterrent for Structural Steel

SP3189 BIRD PERCH Deterrent for Distribution Crossarms

SP3196 BIRD PERCH Deterrent for Inverted Structural Steel

SP3219 BIRD PERCH Deterrent for I-Beams

SP2759 Bushing Cover (WP-2.25F)

SP2959 Bushing Cover (WP-11S, WP-CSP, WP10T, WP-17T)

SP2824 Protector Tubing

SP3093 POLE PLUG

SP3371 RAPTOR CLAMPTM LED Diverter and
RAPTOR CLAMPTM Diverter-Y

SP3372 OWL Series

Application Procedures are available on www.preformed.com.

Easily find products by searching the product name or SP number.

22
JERRY LIGUORI, photographer and author, has au-
thored three books on raptor identification; Hawks From Every
Angle, Hawks at a Distance (Princeton Univ. Press, NJ), and The
Crossley ID Guide: Raptors (Crossley Books, NJ with R. Cross-
ley and B. Sullivan). His accomplishments include numerous
articles on raptors, and he has conducted research regarding all
aspects of raptor biology, life history, identification, and gener-
al behavior. He is active with Hawkwatch International. His stud-
ies have taken him across most of North America, researching rap-
tor biology, life history, identification, migration, and general behavior.
...And taking beautiful photographs.
World Headquarters
660 Beta Drive
Cleveland, Ohio 44143

Mailing Address:
P.O. Box 91129
Cleveland, Ohio 44101

Telephone: 440.461.5200
Fax: 440.442.8816
Web Site: www.preformed.com
E-mail: inquiries@preformed.com

© 2016 Preformed Line Products

Printed in U.S.A.
EN-ML-1195-1
07.16.IH