DF005SA thru DF10SA

Miniature Glass Passivated Single-Phase

Surface Mount Bridge Rectifier
Reverse Voltage 50 to 1000V
Case Style DFS
0.205 (5.2)

duct Forward Current 1.0A

ro
0.195 (5.0)

P
0.047 (1.20)
0.040 (1.02)

New Mounting Pad Layout

0.047 MIN.
(1.20 MIN.)
Dimensions in inches
and (millimeters)

0.404 (10.3)
0.386 (9.80) 0.404 MAX.
(10.26 MAX.)
0.335 (8.51)
0.320 (8.13) 0.060 MIN.
45o 0.255 (6.5) (1.52 MIN.)
0.245 (6.2)

0.013 (0.330)
0.130 (3.3)
0.009 (0.241)
0.120 (3.05)
0.205 (5.2)
0.195 (5.0)
0.060 (1.524)
0.040 (1.016) 0.013 (0.330)
0.003 (0.076)

Mechanical Data Features

Case: Molded plastic body over passivated junctions • Plastic package has Underwriters Laboratory
Terminals: Plated leads solderable per MIL-STD-750, Flammability Classification 94V-0
Method 2026 • This series is UL listed under Recognized Component
Polarity: Polarity symbols marked on body Index, file number E54214
Mounting Position: Any • Glass passivated chip junctions
Weight: 0.04oz., 1.0g • High surge overload rating of 30 Amperes peak
Packaging codes/options: • Ideal for printed circuit boards
27/1.5K per 13” Reel (16mm Tape) • High temperature soldering guaranteed:
45/50 EA. per Tube-Bulk 260°C/10 seconds at 5 lbs. (2.3kg) tension

Maximum Ratings and Thermal Characteristics (T A = 25°C unless otherwise noted)

Parameter Symbol DF005SA DF01SA DF02SA DF04SA DF06SA DF08SA DF10SA Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified current
IF(AV) 1.0 A
at TA = 40°C (2)
Peak forward surge current single half sine-wave
IFSM 30 A
superimposed on rated load (JEDEC Method) TJ = 150°C
Rating for fusing (t < 8.3ms) I2t 4.5 A2sec
(2) RθJA 40
Typical thermal resistance per leg °C/W
RθJL 15
Operating junction and storage temperature range TJ, TSTG –55 to +150 °C

Electrical Characteristics (T A = 25°C unless otherwise noted)

Maximum instantaneous forward voltage drop

VF 1.1 V
per leg at 1.0A
Maximum DC reverse current TA = 25°C 5.0
IR µA
at rated DC blocking voltage per leg TA = 125°C 500
Typical junction capacitance per leg(1) CJ 25 pF
Notes: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Units mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) copper pads
7/27/00
 DF005SA thru DF10SA
Miniature Glass Passivated Single-Phase
Ratings and Surface Mount Bridge Rectifier
Characteristic Curves (T A = 25°C unless otherwise noted)

Fig. 1 - Derating Curve Output Fig. 2 - Maximum Non-Repetitive Peak

Rectified Current Forward Surge Current Per Leg
1.0 30
Average Forward Output Current (A)

Peak Forward Surge Current (A)

60 Hz TJ = 150°C
Resistive or 25 Single Sine-Wave
Inductive Load (JEDEC Method)
20

0.5 15

10

P.C.B mounted on
5 1.0 Cycle
0.51 x 0.51" (13 x 13mm)
Copper pads
0 0
20 40 60 80 100 120 140 160 1 10 100
Ambient Temperature (°C) Number of Cycles at 60 Hz

Fig. 3 - Typical Forward Characteristics Fig. 4 - Typical Reverse Leakage

Per Leg Characteristics Per Leg
10 100
Instantaneous Reverse Current (A)
Instantaneous Forward Current (A)

10
TJ = 125°C
1

0.1
TJ = 25°C 0.1
Pulse width = 300µs
1% Duty Cycle TJ = 50°C

0.01 0.01
0.4 0.6 0.8 1.0 1.2 1.4 0 20 40 60 80 100
Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (V)

Fig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal

Per Leg Impedance
100
Transient Thermal Impedance (°C/W)

100
TJ = 25°C
Junction Capacitance (pF)

f = 1.0 MHz
Vsig = 50mVp-p
10

10

1 0.1
1 10 100 0.01 0.1 1 10 100
Reverse Voltage (V) t, Heating Time (sec.)