MB05F-MB10F
Silicon Bridge Rectifiers
VOLTAGE RANGE: 50 --- 1000 V
CURRENT: 0.5 A
MBF
Features
This series is UL recognized under Component Index, 4.8±0.2
file number E239431
Glass passivated chip junctions
Plastic materrial has U/L flammability classification
94V-O
High surge overload rating: 25A peak
Saves space on printed circuit boards
High temperature soldering guaranteed:
1.2±0.2
260°C/10 seconds at 5 lbs. (2.0kg) tension
3.8±0.2
1. 4±0.2
Mechanical Data 0.6±0.1
1.0±0.15
2.5±0.25 0.3±0.1
Case: Molded plastic body over passivated junctions 6.8±0.2
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026 Dimensions in millimeters
Polarity: Polarity symbols marked on body
Dimensions in inches and (millimeters)
Mounting Position: Any
Weight: 0.0078 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
MB05F MB1F MB2F MB4F MB6F MB8F MB10F UNITS
Maximum recurrent peak reverse voltage V RRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage V RMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 V
Maximum average forw ard
IF(AV) 0.5 A
output current @TA=25
Peak forw ard surge current
8.3ms single half-sine-w ave IFSM 25 A
superimposed on rated load
Maximum instantaneous forw ard voltage
VF 1.0 V
@ 0.4 A
Maximum reverse current @TA=25 5.0 μA
IR
at rated DC blocking voltage @TA=100 0.5 mA
Typical junction capacitance per leg (NOTE 3) CJ 13 pF
Typical thermal resistance per leg (NOTE 1) R θJA 85 /W
(NOTE 2) RθJL 20
Operating junction temperature range TJ - 55 ---- + 150
Storage temperature range TSTG - 55 ---- + 150
NOTES: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
(2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
(3) Measured at 1.0 MHz and applied rev erse v oltage of 4.0 Volts
Free Datasheet http://www.datasheet4u.com/
MB05F-MB10F
Silicon Bridge Rectifiers
Ratings AND Charactieristic Curves
FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT PER LEG
FIG.1 -- DERATING CURVE FOR OUTPUT
AVERAGE FORWARD CURRENT, AMPERES
RRECTIFIED CURRENT
PEAK FORWARD SURGE CURRENT,
35
TＡ=４０
30 SINGLE HALF SINE-WAVE
0.8 (JEDEC Method)
Aluminum Substrate
0.7 25
GLASS
EPOXY f=60Hz
AMPERES
0.6 P.C.B. 20
0.5 15
f=50Hz
0.4 10 1.0 CYCLE
0.3 5.0
0.2 0
1 10 100
0.1
RESISTIVE OR INDUCTIVE LOAD
0
0 30 60 90 120 150
NUMBER OF CYCLES AT 50/60Hz
AMBIENT TEMPERATURE, FIG.4 -- TYPICAL REVERSE CHARACTERISTIC
INSTANTANEOUS REVERSE CURRENT,
100
MICRO AMPERES
10 TJ=125
FIG.3 -- TYPICAL FORWARD VOLTAGE
1.0
KKKKCHARACTERISTICS PER LEG
INSTANTANEOUS FORWARD CURRENT,
0.1
TJ=25
10
.01
0 20 40 60 80 100
1
TJ=25
AMPERES
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
0.1
PULSE WIDTH=300µS FIG.5 -- TYPICAL JUNCTION CAPACITANCE PER
BBBBBBB ELEMENT
0.01 100
CAPACITANCE, pF
0.2 0.4 0.6 0.8 1.0 1.2 1.4 60
f=1MHz
40 TJ=25
20
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
10
1
.1 .2 .4 1.0 2 4 10 20 40 100
REVERSE VOLTAGE, VOLTS
Free Datasheet http://www.datasheet4u.com/
