32HP
MODEL KND 3200
The big engine that’s high in power,
low in fuel cost
Introducing the new high power DIADEMA diesel engine developed by ENGINTECH for
deep-well pumping, flour mills and so on. With its increased power and displacement, low fuel
c o n s u m p t i o n , electric or hand starting mechanism and other innovative fe a t u r e s , it far
surpasses conventional type engines.
Five Outstanding Features
1 4
Big horsepower and A variety of new features when the engine is running at low
displacement that insure longer engine speed, the oil pump capacity has
Diadema Diesel engine KND 3200(E) life been increased twice the regular
gives you greater horsepower and Through the incorporation of the size to 12.31/min at 1OOO rpm.
displacement than previous models. following new features, the life of This means that even when the
the engine has been dramatically engine is running at only 500rpm,
HORSEPOWER DISPLACEMENT lengthened. oil pressure is several times the
KND 3200(E) 32HP/1100RPM 3711 CC A. Oil bath type cyclone air cleaner usual amount or 2kg/cm2, insuring
A two-stage type air cleaner that unimpaired lubrication.
blocks dust at three places, the
5
cyclone, oil bath and element. Easier maintenance
B. Double oil leak prevention
mechanism A. The lubricating oil capacity has
Because of Diadema's unique been greatly increased so that you
screw type oil return mechansim get 300 hours or three times the
and the tight sealing assured by the ordinary running time on one
oil seal fitted with a dust lip, you are change of oil.
assured of complete protection B. The size of the fuel tank has also
When new engine is used for pumping against leaks of lubricating oil. At been increased - 42l for the KND
the same time, dust is prevented 3200(E) - so that you don't have to
from entering the crankcase. refuel so often.
C. New type governor mechanism
To increase the durability of the Other feature include a safety
governor, bearings have been used cover installed so that there is no
in the mechanism that relays power danger of your hand coming in contact
to the governor lever and all parts with the flywheel when you are
subject to friction have been using the operating lever. In addition,
designed in such a way as to greatly the engines are designed so that
When conventional engine is used
reduce wear. they can be installed on the same
D. Increased oil pump capacity installation platform as that used for
When these engines are employed In order to prevent poor lubrication conventional type engines.
for pumping purposes, they allow
you to pump greater quantities of Performance Cur ve
water from deeper levels.
2 World's No.1 in low fuel
cost with 145gr/HP-h
This Diadema engine is No.1 in the low
cost of fuel (for engines under 50HP)
3 Quick, easy starting by
hand or electrical mecha-
nism
The KND 3200 is equipped with a
decompression mechanism and
double flywheel, insuring easy hand
starting. The KND 3200E comes
equipped with an electric starting
mechanism (optional), so that even a
woman or child can start them easily
by merely turning a switch.
KND 3200 (Hand starting) Double Flywheel
KND 3200 (Electric starting)
Dimensions
Specifications Standard Accessories
Model KND 3200 KND 3200E Installation bolt complete 4 sets
Type 4- cycle horizontal diesel engine Fuel tank complete 1 pc
Number of cylinder 1 Air cleaner complete 1 set
Bore x Stroke 150 x 210 Exhaust pipe 1 set
Displacement (mm) 3.711 Flat pulley 1 set
Brake horsepower (HP) 28 - 32 (Dia. according to order)
Engine speed (rpm) 1000 - 1100
Piston speed (m/s) 7.0 - 7.7
Export Shipment Specifications
Compression ratio 16.0
Cooling system Water cooling with hopper Model Cu. Meter Gross Weight
Combustion system Direct injection (Cu. Ft,) kg
Fuel Light diesel oil KND 3200 1.77 (62.6) 998
Lubrication oil For 1 API service CC class and above KND 3200E 1.77 (62.6) 1023
Lubrication system Forced lubricating with trochoid pump
Starting system Hand Electric * These specifications and dimensions may be changed
Fuel tank capacity 42 42 without notice.
Dry weight (kg) 788 813
Manufactured by Distrbuted by
Parque Industrial Tecnológico Quilmes - Camino Gral. Belgrano Km. 10,5
C.P. (1876) Bernal Oeste - Provincia Buenos Aires
Republica Argentina - Tel/Fax: 4270-1185
http://www.engintech.com.ar - http://www.diademaengine.com.ar
