CMP PRODUCTS CABLE GLAND CATALOGUE

CMP EXPLOSIVE ATMOSPHERES PRODUCTS

TECHNICAL DATA
Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444

E1FW Mechanical Classifications*

Enclosure Protection
Impact = Level 8, Cable Anchorage = Class D
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category B
E1FW Globally Approved, Explosive
ATEX Certificate SIRA13ATEX1071X, SIRA13ATEX4077X
Atmosphere Cable Gland ^ II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
Code of Protection
^ II 3G Ex nR IIC Gc, ^ IM2 Ex d I Mb, Ex e I Mb
Compliance Standards EN 60079-0,1,7,15,31
For all types of Steel & Aluminium Wire IECEx Certificate IECEx SIR 13.0026X, IECEx SIM 14.0007X
Armoured Cables Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb

• Metal-to-metal armour clamping Compliance Standards IEC 60079-0,1,7,15,31

cCSAus Certificate (20S16 - 90) 1310517
• Direct & remote installation
Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure
• Displacement type flameproof inner seal CSAus Code of Protection Type 3, 4 and 4X,
Class I, Zone 1, AEx e II, AEx nR II
• Controlled outer ‘load retention’ seal Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure
cCSA Code of Protection Type 3, 4 and 4X,
• Unique OSTG prevents overtightening Ex d IIC, Ex e IIC, Ex nR II
CAN/CSA-C22.2 No 0, 18, 25, 30, 94, 174, CAN/CSA-E60079-0, 1, 7,
• -60˚C to +130˚C Compliance Standards
ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0, 1, 7
• Globally marked, IECEx, ATEX & cCSAus EAC Certificate TC RU C-GB.ГБ05.B00138

• Superior EMC performance UkrSEPRO UA.TR.047.C.0644-15

KCS Certificate 14-GA4BO-0257X
CCOE / PESO (India) Certificate P333688
NEPSI Certificate GYJ13.1140X / GYJ13.1282X
INMETRO Approval TÜV 12.0618X
RETIE Approval Number 03866
Marine Approvals LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA, BV: 43180/A1
Ingress Protection Rating** IP66 as standard (IP67, IP68*** available upon request)
Deluge Protection Compliance DTS01:91 option available on request (white ferrule for identification purposes)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
* Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to page 7 or www.cmp-products.com for further information.
*** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Cable Gland Selection Table Dimensions listed below are for metric cable glands only
Refer to illustration at the top of the page. Dimensions for alternative threads may vary, please see supplementary technical data sheet
Available Entry Threads “C” Cable Overall
Across Across Combined Ordering
(Alternate Metric Thread Lengths Available) Bedding Cable Armour
Flats Corners Reference Cable
Cable Diameter Diameter Range Protrusion
Standard Option “D” “D” (*Brass Metric) Gland
Gland “A” “B” Length Shroud
Weight
Size Thread “F”
Thread Length Ordering (Kgs)
Metric NPT Length (NPT) NPT Min Max Min Max Min Max Max Max Size Type
(Metric) “E” Suffix
“E”
20S16 M20 15.0 ½” 19.9 ¾" 3.1 8.6 6.1 13.1 0.8 1.25 24.0 26.4 72.5 20S16 E1FW 1RA PVC04 0.16
20S M20 15.0 ½” 19.9 ¾" 6.1 11.6 9.5 15.9 0.8 1.25 24.0 26.4 70.0 20S E1FW 1RA PVC04 0.15
20 M20 15.0 ½” 19.9 ¾" 6.5 13.9 12.5 20.9 0.8 1.25 30.5 33.6 73.0 20 E1FW 1RA PVC06 0.21
25S M25 15.0 ¾” 20.2 1" 11.1 19.9 14.0 22.0 1.25 1.6 37.5 41.3 89.0 25S E1FW 1RA PVC09 0.33
25 M25 15.0 ¾” 20.2 1" 11.1 19.9 18.2 26.2 1.25 1.6 37.5 41.3 89.0 25 E1FW 1RA PVC09 0.33
32 M32 15.0 1” 25.0 1 ¼" 17.0 26.2 23.7 33.9 1.6 2.0 46.0 50.6 86.0 32 E1FW 1RA PVC11 0.43
40 M40 15.0 1 ¼” 25.6 1 ½" 22.0 32.1 27.9 40.4 1.6 2.0 55.0 60.5 90.0 40 E1FW 1RA PVC15 0.62
50S M50 15.0 1 ½” 26.1 2" 29.5 38.1 35.2 46.7 2.0 2.5 60.0 66.0 91.0 50S E1FW 1RA PVC18 0.75
50 M50 15.0 2” 26.9 2 ½" 35.6 44.0 40.4 53.0 2.0 2.5 70.1 77.1 95.0 50 E1FW 1RA PVC21 0.95
63S M63 15.0 2” 26.9 2 ½" 40.1 49.9 45.6 59.4 2.0 2.5 75.0 82.5 102.0 63S E1FW 1RA PVC23 1.34
63 M63 15.0 2 ½” 39.9 3" 47.2 55.9 54.6 65.8 2.0 2.5 80.0 88.0 104.0 63 E1FW 1RA PVC25 1.34
75S M75 15.0 2 ½” 39.9 3" 52.8 61.9 59.0 72.0 2.0 2.5 90.0 99.0 115.0 75S E1FW 1RA PVC28 2.11
75 M75 15.0 3” 41.5 3 ½" 59.1 67.9 66.7 78.4 2.5 3.0 100.0 110.0 117.0 75 E1FW 1RA PVC30 2.42
90 M90 24.0 3 ½” 42.8 4" 66.6 78.6 76.2 90.3 3.15 4.0 114.3 125.4 147.0 90 E1FW 1RA PVC32 4.21
100 M100 24.0 3 ½” 42.8 4" 76.0 90.9 86.1 101.4 3.15 4.0 123.0 135.3 140.0 100 E1FW 1RA LSF33 4.45
115 M115 24.0 4" 44.0 5" 86.0 97.9 101.5 110.2 3.15 4.0 133.4 146.7 162.0 115 E1FW 1RA LSF34 6.19
130 M130 24.0 5" 46.8 - 97.0 114.9 110.2 123.2 3.15 4.0 152.4 167.6 174.0 130 E1FW 1RA LSF35 8.34
*Note : For material options please add the following suffix to change the Ordering Reference ; Brass (no suffix required), Nickel Plated Brass “5”, Copper Free Aluminium “1”
For NPT options please add the following digits to the material suffix ; ½” = 31, ¾” = 32, 1” = 33, 1 ¼” = 34, 1 ½” = 35, 2” = 36, 2 ½” = 37, 3” = 38,3 ½” = 39, 4” = 310 (Brass requires prefix “0”)
Examples: 32E1FW1RA534 = Nickel Plated Brass 1¼” NPT, 50SE1FW1RA035 = Brass 1½” NPT, 20E1FW1RA5 = Nickel Plated Brass M20
Dimensions are displayed in millimetres unless otherwise stated

80 www.cmp-products.com

2017 full product catalogue DESKTOP WORKING FILE.indd 80 16/01/2017 15:04:26