PGKT110

60Hz/1800 r.p.m-P.F.0.8 Prime Power Standby Power Rated Current

Genset Engine Alternator Voltage（V） PH kW/kVA kW/kVA Amps

N/A
240
UCI274F 1 100/125 110/138 520.8
（220-240）
N/A
LSA 44.3 M6
UCI 274D 380/220 3 100/125 110/138 189.9
FPA27-902
LSA 44.3 M6
UCI 274D 208/120 3 100/125 110/138 347
FPA27-902
FC125X-F R6105AZLDS2
LSA 44.3 M6
UCI 274D 220/127 3 100/125 110/138 328
FPA27-902
LSA 44.3 M6
UCI 274D 230/132 3 100/125 110/138 313.8
FPA27-902
LSA 44.3 S5
UCI 274C 480/277 3 100/125 110/138 150.4
FPA27-902
Ratings:
All three Phase generator sets are rated at 0.8 power factor. All single-phase generator sets are rated at 0.8 or 1.0 power factor.
POWERGEN reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever.

Prime Power: Standby Power:

Available continuously at variable load in lieu of commercially

Emergency Standby Power in variable load applications in
purchased power for an unlimited number of hours per year in
accordance with ISO8528-1 in the event of a utility power failure. No
accordance with ISO8528-1, and an overload of 10% permitted
overload available for this service as relevant alternators are peak
for one hour in every twelve hours of operation in accordance
continuous rated at 27℃.
with ISO 3046-1.

Overall Dimensions (mm) & Weight (kg)

LENGTH 3300 WIDTH 1100

HEIGHT
1500

Weight (kg) ：2200

1
Standard and Optional Accessories
System Standard ● Optional ○
● Standard air filter ○ Air prefilter
Air Intake System
● Air filter overload alarm ○ Heavy air filter
● 50℃ radiator ○ Antifreeze
● Low water level alarm ① ○ Water jacket heater
Cooling System
● Fan and belt guard
● Discharge valve
● Stainless steel bellow ○ Stainless steel silencer
● Residential silencer ○ Stainless steel exhaust pipe
Exhaust System ● Complete exhaust pipe
● Rain cap
● 8 Hours integrated base fuel tank ○ 6 Hours double wall base fuel tank
● Standard fuel filter ○ Fuel-water separator
Fuel System ● Fuel level gauge ○ Oil level sensor ② ③
● Fuel filling cap ○ Automatic fuel top up system ②
● Fuel hose
● Standard oil filter ○ Oil heater
Lubrication System ● Manual oil pump and drain ○ Lube oil level indicator
○ Oil temperature indicator ②
● Shunt or self excited ○ PMG or AREP（Leroy-Somer only）
● Class H insulation ○ Alternator space heaters
● H class temperature rise ○ PT100 winding temperature sensors
● DELIXI MCCB ○ Weaver AVR
Alternator ● Terminal connection lugs (L1, L2, L3, ○ Weaver prolapse transformer
and Electric Switch LN) ○ F class temperature rise
○ 4 Pole circuit breaker with leakage protection
○ Circuit breaker - 4 pole
○ ABB MCCB
○ MCCB auxiliary contact and shunt tripping
device
● Comap Nano Plus for 4 cylinders engine ○ Panel lighting
Control System ● Comap InteliLite AMF20 for 6 cylinders
or ECU engine
● 67-72 db(A) @ 3 meters ○ Forklift holes
● 4mm -6mm Steel base ○ Enclosure color:
● Transportation support leg
● Single hook ○ Trailer for off road or on road
● Power coating enclosure
Silent / Base
● Anti-vibration mounting between engine
/alternator and baseframe
● Emergency stop mounted outside the
canopy
● Standard color: Ral 3020
● Battery with bracket and cables Low temperature starting batteries
Start / Charge ● Engine battery charger Battery swtich
● 3A Mains charger High current charger（10A，20A）
Remark: ① Not available for Perkins 400 series engines
② When you need the automatic oil top up system, you have to use the electrical oil level sensor.
③ You can choose either electrical oil level sensor or oil temperature sensor.

2
Engine
Engine specifications Fuel System
Manufacture Kofo Type injection system Indirect Injection
Engine model R6105AZLDS2 Fuel consumption at 100% standby power 34.5 Litres/hour
Engine type 4 cycle, in-line Fuel consumption at 100% prime power 31.4 Litres/hour
Engine speed 1800 r.p.m Fuel consumption at 75% prime power 25.1 Litres/hour
Prime power 115.5 kW Fuel consumption at 50% prime power 18.8 Litres/hour
Standby power 127 kW Fuel consumption at 25% prime power 9.4 Litres/hour
Governor type Mechanical Fuel tank capacity 8-12 hours
Steady speed adjusting rario at rated condition ≤5 Lubrication System
Aspiration: Turbocharged, air-to-air charge cooling Oil sump capacity 18 Litres
Displacement 6.75 L Oil pressure 0.3-0.5 Mpa
Bore * Stroke 105 ×130 mm Oil pressure at idle speed ≥0.1 Mpa
NO. of cylinders 6 Lubricating method Pressure lubrication
Compression ratio 16.0:1 Oil consumption rate 1.63 g/kW.h
Engine idle speed ≤650 rpm Max continuous oil temperature 105℃
Fring order 1-5-3-6-2-4 Cooling system
Flywheel ring gear teeth number 130 Total system capacity 23 Litres
Noise level @7m 74 dBA Thermostat operation range 76-85 ℃
Exhaust system Maximum top tank temperature 96℃
Exhaust gas temperature ≤600℃ Electric System
Exhaust outlet size 57 mm Starting method Electric motor start
Air intake system Electrical system voltage 24V
Maximum air intake restriction Battery Maintenance-free
- Standard filter ≤2.5 kPa Connecting cables Auailable
- Air filter type Dry

Alternator 60Hz/1800R.P.M
General data Insulation class H
Power factor Cos￠ = 0.8 Bearing Single
Excitation Shunt / Brushless Altitude ≤ 1000 m
Ratings Prime Power Standby Power
Brand Alternator Number of wires AVR Model PH Voltage（V） kW/kVA kW/kVA
Leroy-Somer N/A
240
Stamford UCI274F 4 AS440 1 108/135 N/A
（220-240）
Tide N/A
Leroy-Somer LSA 44.3 M6 R250 99/124 109/136
Stamford UCI 274D 12 AS440 3 380/220 105/131 114/142.5
Tide FPA27-902 SX460 100/125 110/137.5
Leroy-Somer LSA 44.3 M6 R250 108/135 119/149
Stamford UCI 274D 12 AS440 3 208/120 105/131 114/142.5
Tide FPA27-902 SX460 108/135 120/150
Leroy-Somer LSA 44.3 M6 R250 114/143 126/158
Stamford UCI 274D 12 AS440 3 220/127 110/138 120/150
Tide FPA27-902 SX460 108/135 120/150
Leroy-Somer LSA 44.3 M6 R250 96/120 105/131
Stamford UCI 274D 12 AS440 3 230/132 110/138 120/150
Tide FPA27-902 SX460 96/120 106/132.5
Leroy-Somer LSA 44.3 S5 R250 100/125 110/138
Stamford UCI 274C 12 AS440 3 480/277 100/125 110/137.5
Tide FPA27-902 SX460 108/135 120/150

3
Control System

Comap
Comap Nano Comap InteliLite
InteliLite
Plus AMF25
AMF20
Phase voltage 3 3 3

Wire voltage 3 3 3

Current Instrument 3 3

Frequency ● ● ●
Viewable parameters Active power × ● ●
Reactive power × ● ●

Apparent power × ● ●
Power factor × ● ●

Electric energy metering × × ●

Abnormal voltage ● ● ●
Over-current warning × ● ●
Generator protection Over current protection × ● ●
Over Frequency protection ● ● ●
Short circuit protection MCCB MCCB+○ MCCB+○
Oil pressure ● ● ●
Water temperature ● ● ●
Engine
figure Fuel level ○ ○ ○
Speed ● ● ●
Battery voltage ● ● ●
Elapsed time ● ● ●
Low oil pressure warning ● ● ●
Low oil pressure protection ● ● ●
High temperature warning ● ● ●
Engine protection High temperature protection ● ● ●
Overspeed warning ● ● ●
Overspeed protection ● ● ●
Charge fault ● ● ●
Remote start-stop ● ● ●
AMF ● ● ●
Programmable input 3 7 7
Programmable output 6 7 7
Port extension USB ○ ○
Remote monitoring × ○ ○
Function
Communication port × ○ ○
CAN ● ○ ●
Start/Stop time control × × ●
Maintenance tips × × ●
Fault record × × ●
Multi-language function × ● ●
Remark: ● Standard ○ Optional × NA

4
Automatic Transfer Switch A.T.S - 4 Poles
(Safety Installation: Detect - Control – Switch System)
POWERGEN offers not only a changeover switch but also an integrated mains detection and switch system for your 24 Hour
Power Protection. The system enables automatic start-up and operation of the generating set in the event of a mains power
failure, overvoltage or loss of phase; and also mains automatic re-transfer once it come back.
The system has a wide application such as hospital, bank, telecom, air port, broadcasting station and hotels.

System Advantages
● Automatically transfer and re-transfer load from main power to gen-power without operator intervention operation.
（Both automatic and manual)
● ATS Controller (AMF function), seamless integration with Intelligent 5.0
● Available from 32 – 3200A, better protection for 4 pole switch.
● Available in standard, bypass isolation and service-entrance configurations.
● Configurable in open, closed and programmed transition operating modes.
● Designed to interface seamlessly with POWERGEN generators and switchgear.
● Drip Proof IP23 Enclosure.
● Easy Installation: Wall-mounted & Floor standing Rated
Breaker Type
● Comes fully loaded with the technology to do the job. Current
A Chinese ABB Socomec
32 × B ×
63 A B B
80 × × B

100 A B B
125 × B B
160 B B B
200 × B ×
250 C B B
300 × × ×

315 × C ×
400 C C C
630 C D D
800 D D D
1000 D D D
1250 D D D
1600 D D E
2000 E E E
2500 E E E

3200 E × E
Dimensions : mm
A：400×200×500 B：500×300×650
C：600×400×1200 D：800×600×1400
E：1000×800×1600