REFERENCE STANDARDS - PLASTICS
ASTM TITLE
D 1784 SPECIFICATION FOR RIGID POLY (VINYL CHLORIDE) (PVC) COMPOUNDS AND
CHLORINATED POLY (VINYL CHLORIDE) (CPVC) COMPOUNDS
SCOPE: THIS SPECIFICATION COVERS RIGID PVC AND CPVC COMPOUNDS INTENDED FOR
GENERAL PURPOSE USE IN EXTRUDED OR MOLDED FORM.
D 1785 SPECIFICATION FOR POLY (VINYL CHLORIDE) (PVC
PVC) PLASTIC PIPE
PVC PIPE, SCHEDULE 40, 80,
AND 120
SCOPE: THIS SPECIFICATION COVERS PVC PIPE IN SCHEDULE 40,80, AND 120 FOR PRESSURE
APPLICATIONS. THIS SYSTEM IS INTENDED FOR PRESSURE APPLICATIONS WHERE THE
OPERATING TEMPERATURE WILL NOT EXCEED 140 DEGREE FAHRENHEIT.
D 2235 SPECIFICATION FOR SOLVENT CEMENT FOR ACRYLONITRILE-BUTADIENE-STYRENE
ABS
(ABS
ABS) PLASTIC PIPE AND FITTINGS
SCOPE: THIS SPECIFICATION COVER SOLVENT CEMENT FOR JOINING (ABS) PIPE AND FITTINGS
FOR NONPRESSURE SYSTEMS.
D 2241 SPECIFICATIONS FOR POLY (VINYL CHLORIDE) (PVC
PVC) PIPE PRESSURE-RATED (SDR-
PVC SDR-
SERIES)
SERIES
SCOPE: THIS SPECIFICATION COVERS (PVC) PIPE MADE IN STANDARD THERMOPLASTIC PIPE
DIMENSION RATIOS (SDR SERIES) AND PRESSURE RATED FOR WATER.
D 2464 SPECIFICATIONS FOR THREADED POL
POLYY (VINYL CHLORIDE) (PVC) PLASTIC PIPE
TINGS, SCHEDULE 80
FITTINGS,
FIT
SCOPE: THIS SPECIFICATION COVERS (PVC) THREADED SCHEDULE 80 FITTINGS WHICH ARE
USED WITH THE DISTRIBUTION OF PRESSURIZED LIQUIDS ONLY. THREADED SCHEDULE
80 FITTINGS ARE NOW COVERED BY ASTM F 437.
D 2466 SPECIFICATIONS FOR POLY (VINYL CHLORIDE) (PVC
PVC) PLASTIC PIPE FIT
PVC FITTINGS,
TINGS,
SCHEDULE 40
SCOPE: THIS SPECIFICATION COVERS (PVC) SCHEDULE 40 FITTINGS USED FOR DISTRIBUTION OF
PRESSURIZED LIQUIDS ONLY.
D 2467 SPECIFICATIONS FOR POLY (VINYL CHLORIDE) (PVC
PVC) PLASTIC PIPE FIT
PVC FITTINGS
TINGS,
TINGS
SCHEDULE 80
SCOPE: THIS SPECIFICATION COVERS (PVC) SCHEDULE 80 FITTINGS WHICH ARE USED WITH THE
DISTRIBUTION OF PRESSURIZED LIQUIDS ONLY.
D 2564 SPECIFICATIONS FOR SOLVENT CEMENTS FOR POLY (VINYL CHLORIDE) (PVC
PVC) PLASTIC
PVC
PIPE AND FITTINGS
SCOPE: THIS SPECIFICATION COVERS REQUIREMENTS FOR (PVC) SOLVENT CEMENTS TO BE USED
IN JOINING (PVC) PIPING SYSTEMS.
D 2661 ABS
SPECIFICATIONS FOR ACRYLONITRILE-BUTADIENE-STYRENE (ABS
ABS) SCHEDULE 40
PLASTIC DR AIN, W
DRAIN, ASTE, AND VENT PIPE AND FIT
WASTE, TINGS
FITTINGS
SCOPE: THIS SPECIFICATION COVERS FITTINGS AND SINGLE EXTRUDED (SOLID WALL) (ABS)
PLASTIC DRAIN, WASTE, AND VENT PIPE MADE TO SCHEDULE 40 IRON PIPE SIZES.
1
REFERENCE STANDARDS - PLASTICS
D 2665 SPECIFICATIONS FOR POLY (VINYL CHLORIDE) (PVC
PVC) PLASTIC DR
PVC DRAIN, WASTE,
AIN, WASTE, AND VENT
PIPE AND FIT TINGS
FITTINGS
SCOPE: THIS SPECIFICATION COVERS REQUIREMENTS FOR (PVC) PLASTIC DRAIN, WASTE, AND
VENT PIPE AND FITTINGS SUITABLE FOR THE DRAINAGE AND VENTING OF SEWAGE AND
CERTAIN OTHER LIQUID WASTE.
D 2729 PVC
PVC) SEWER PIPE AND FIT
SPECIFICATIONS FOR POLY (VINYL CHLORIDE) (PVC TINGS
FITTINGS
"SEWER AND DRAIN"
SCOPE: THIS SPECIFICATION COVERS REQUIREMENTS FOR (PVC) SEWER PIPE AND FITTINGS.
THE PIPE AND FITTINGS IN THIS SPECIFICATION ARE DESIGNED FOR SEWER AND
DRAINAGE APPLICATIONS OUTSIDE THE BUILDING.
D 2846 CPVC) PLASTIC HOT AND
SPECIFICATIONS FOR CHLORINATED POLY (VINYL CHLORIDE) (CPVC
CPVC
COLD W ATER DISTRIBUTION SYSTEM
WA
SCOPE: THIS SPECIFICATION COVERS REQUIREMENTS FOR (CPVC) PLASTIC HOT AND COLD
WATER DISTRIBUTION SYSTEM COMPONENTS MADE IN ONE STANDARD DIMENSION
RATIO AND INTENDED FOR WATER SERVICE UP TO AND INCLUDING 180 DEGREE
FAHRENHEIT.
D 2949 SPECIFICATIONS FOR 3.25-IN. OUTSIDE DIAMETER POLY (VINYL CHLORIDE) (PVC
PVC
PVC)
PLASTIC DRAIN, WASTE, AND VENT PIPE AND FIT TINGS
FITTINGS
SCOPE: THE REQUIREMENTS OF THIS SPECIFICATION ARE INTENDED TO PROVIDE PIPE AND
FITTINGS SUITABLE FOR DRAINAGE OF SEWAGE AND CERTAIN OTHER LIQUID WASTE.
D 3034 SPECIFICATIONS FOR TYPE PMS POLY (VINYL CHLORIDE) (PVC) SEWER PIPE AND
TINGS SDR 35
FITTINGS
FIT
SCOPE: THE REQUIREMENTS OF THIS SPECIFICATION ARE INTENDED TO PROVIDE PIPE AND
FITTINGS SUITABLE FOR NON-PRESSURE DRAINAGE OF SEWAGE AND SURFACE
WATER.
D 3212 SPECIFICATIONS FOR JOINTS FOR DRAIN AND SEWER PLASTIC PIPES USING FLEXIBLE
ASTOMERIC SEALS
ELASTOMERIC
EL
SCOPE: THIS SPECIFICATION COVERS JOINTS FOR PLASTIC PIPE SYSTEMS THROUGH
COMPRESSION OF AN ELASTOMERIC SEAL OR RING.
D 3311 SPECIFICATION FOR DRAIN, WASTE AND VENT (DWV) PLPLASTIC FITTING
ASTIC FIT PA
TING PAT TERNS
SCOPE: THIS SPECIFICATION PROVIDES STANDARD FITTING GEOMETRIES AND LAYING LENGTHS
FOR PLASTIC FITTINGS INTENDED FOR USE IN DRAIN, WASTE, AND VENT APPLICATIONS.
D 3965 SPECIFICATIONS FOR RIGID ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MA
MATERIAL
TERIAL
FOR PIPE AND FIT TINGS
FITTINGS
SCOPE: THIS SPECIFICATION COVERS MATERIALS MADE FROM ONLY VIRGIN ABS POLYMERS AND
BLENDS OF ABS POLYMERS SUITABLE FOR USE IN THE EXTRUSION OF PIPE AND
MOLDED FITTINGS.
D 4396 PVC
SPECIFICATIONS FOR RIGID POLY (VINYL CHLORIDE) (PVC
PVC) AND RELATED PLASTIC
COMPOUNDS FOR NONPRES SURE PIPING PRODUCTS
NONPRESSURE
SCOPE: THE REQUIREMENTS OF THIS SPECIFICATION ARE INTENDED FOR THE QUALITY CONTROL
OF COMPOUNDS USED TO MANUFACTURE PIPE AND FITTINGS INTENDED FOR
NONPRESSURE USE.
F 437 SPECIFICATION FOR THREADED CHLORINATED POLY (VINYL CHLORIDE) (CPVC
CPVC) PLASTIC
CPVC
PIPE FIT TING, SCHEDULE 80
FITTING,
SCOPE: THIS SPECIFICATION COVERS CPVC THREADED SCHEDULE 80 FITTINGS, INTENDED FOR
2
REFERENCE STANDARDS - PLASTICS
USE WITH IRON PIPE SIZE (IPS) OUTSIDE DIAMETER PLASTIC PIPE.
F 439 SPECIFICATION FOR CHLORINATED POLY (VINYL CHLORIDE) (CPVC
CPVC) PLASTIC PIPE
CPVC
TING, SCHEDULE 80
FITTING,
FIT
SCOPE: THIS SPECIFICATION COVERS SCHEDULE 80 CPVC FITTINGS, INTENDED FOR USE WITH
IRON PIPE SIZE (IPS) OUTSIDE DIAMETER PLASTIC PIPE.
F 441 SPECIFICATIONS FOR CHLORINATED POLY (VINYL CHLORIDE) (CPVC
CPVC) PLASTIC PIPE,
CPVC
SCHEDULE 40 AND 80
SCOPE: THIS SPECIFICATION COVERS CPVC PIPE MADE IN SCHEDULE 40, AND 80 SIZES AND
PRESSURE RATED FOR WATER.
F 477 SPECIFICATIONS FOR EL
ELASTOMERIC
ASTOMERIC SEALS (GASKETS) FOR JOINING PL
PLASTIC
ASTIC PIPE
SCOPE: THIS SPECIFICATION COVERS ELASTOMERIC SEALS (GASKETS) USED TO SEAL THE JOINT
OF PLASTIC PIPE USED FOR GRAVITY APPLICATION.
F 480 SPECIFICATION FOR THERMOPLASTIC WELL CASING PIPE AND COUPLINGS MADE IN
STANDARD DIMENSION RATIOS (SDR), SCHEDULE 40 AND SCHEDULE 80
SCOPE: THIS SPECIFICATION COVERS WATER WELL CASING PIPE AND COUPLING MADE FROM
THERMOPLASTIC MATERIAL IN STANDARD DIMENSION RATIOS (SDR), SCHEDULE 40 AND
SCHEDULE 80.
F 493 SPECIFICATION FOR SOLVENT CEMENTS FOR CHLORINATED POLY (VINYL CHLORIDE)
CPVC
(CPVC
CPVC) PLASTIC PIPE AND FITTINGS
SCOPE: THIS SPECIFICATION PROVIDES REQUIREMENTS FOR CPVC SOLVENT CEMENT TO BE
USED IN JOINING CPVC PIPE AND SOCKET TYPE FITTINGS.
F 628 abs
Specification for acrylonitrile-butadiene-styrene (abs
abs) schedule 40 plastic drain, waste, and vent pipe
with a cellular core
SCOPE: This specification covers coextruded ABS plastic drain, waste, and vent pipe made to Schedule 40 iron
pipe size (IPS).
F 656 SPECIFICATION FOR PRIMERS FOR USE IN SOLVENT CEMENT JOINTS OF POLY (VINYL
PVC
CHLORIDE) (PVC
PVC) PLASTIC PIPE AND FITTINGS
SCOPE: THIS SPECIFICATION COVERS REQUIREMENTS FOR PRIMERS FOR USE WITH PVC PIPE
AND FITTINGS THAT ARE TO BE JOINED BY PVC CEMENT MEETING THE REQUIREMENTS
OF SPECIFICATION D 2564.
F 891 SPECIFICATION FOR COEXTRUDED POLY (VINYL CHLORIDE) (PVC) PL ASTIC PIPE WITH A
PLASTIC
UL
CELLUL
CELL AR CORE NONPRESSURE IN THREE SERIES: SCHEDULE 40, PS SERIES 25, 50,
ULAR
100, AND A SEWER AND DR AIN SERIES
DRAIN
SCOPE: THIS SPECIFICATION COVERS COEXTRUDED PVC PLASTIC PIPE WITH A CELLULAR CORE
FOR NONPRESSURE USE IN THREE SERIES: AN IPS SCHEDULE 40 SERIES; A PS SERIES
SERIES WITH AN IRON PIPE SIZE OUTSIDE DIAMETER WITH VARYING WALL THICKNESS
AS REQUIRED FOR PIPE STIFFNESS OF 25, 50 AND 100; AND A SEWER AND DRAIN
SERIES.
3
REFERENCE STANDARDS - CAST IRON
AMERICAN SOCIETY FOR TESTING AND MATERIALS
ASTM TITLE
A 74 SPECIFICATION FOR CAST IRON SOIL PIPE AND FIT
FITTINGS
TINGS HUB AND SPIGOT (SERVICE
AND EXTRA HEAVY)
SCOPE: THIS SPECIFICATION COVERS CAST IRON PIPE AND FITTINGS USED IN SANITARY DRAIN,
WASTE, AND VENT (DWV), SEWER, AND STORM DRAINAGE APPLICATION. THIS SYSTEM
IS INTENDED FOR USE IN NONPRESSURE APPLICATIONS.
A 888 SPECIFICATION FOR HUBLES
HUBLESSS CAST IRON SOIL PIPE AND FIT
FITTINGS
TINGS FOR SANITARY AND
STORM DRAIN, WASTE, AND VENT APPLICATION
SCOPE: THIS SPECIFICATION COVERS HUBLESS CAST IRON PIPE AND FITTINGS USED IN
SANITARY DRAIN, WASTE, AND VENT (DWV), SEWER, AND STORM DRAINAGE
APPLICATIONS. THIS SYSTEM IS INTENDED FOR USE IN NONPRESSURE APPLICATIONS.
C 564 SPECIFICATION FOR RUBBER GASKETS FOR CAST IRON SOIL PIPE AND FITTINGS
SCOPE: THIS SPECIFICATION COVERS PERFORMED RUBBER GASKETS USED TO SEAL JOINTS IN
CAST IRON SOIL PIPE AND FITTINGS.
C 1277 SPECIFICATION FOR SHIELDED COUPLINGS JOINING HUBLESS CAST IRON SOIL PIPE
AND FITTINGS (HEA VY DUTY COUPLINGS)
(HEAVY
SCOPE: THIS SPECIFICATION COVERS THE EVALUATING OF THE PERFORMANCE OF SHIELDED
HUBLESS COUPLINGS TO JOIN CAST IRON SOIL PIPE AND FITTINGS.
CAST IRON SOIL PIPE INSTITUTE
CISPI TITLE
301 SPECIFICATION FOR HUBLESS CAST IRON SOIL PIPE AND FIT
HUBLESS TINGS FOR SANITARY AND
FITTINGS
STORM DRAIN, WASTE, AND VENT PIPING APPLICATIONS
SCOPE: THE PURPOSE OF THIS STANDARD IS TO ESTABLISH STANDARDS COVERING MATERIAL,
DIMENSIONS, AND TOLERANCE FOR PIPE AND FITTINGS FOR HUBLESS CAST IRON
SANITARY AND STORM DRAIN, SANITARY WASTE, AND VENT PIPING APPLICATIONS.
310 SPECIFICATION FOR COUPLING FOR USE IN CONNECTION WITH HUBLESS CAST IRON
PIPE AND FITTINGS FOR SANITARY AND STORM DRAIN, WASTE, AND VENT PIPING
APPLICATION (REGUL AR HUBLES
(REGULAR HUBLESS S COUPLING)
SCOPE: THE PURPOSE OF THIS SPECIFICATION IS TO ESTABLISH CRITERIA FOR MATERIAL
DIMENSIONS AND TOLERANCES FOR ONE TYPE OF COUPLING USED IN HUBLESS CAST
IRON SOIL PIPE AND FITTING FOR SANITARY AND STORM DRAIN, WASTE AND VENT
PIPING APPLICATIONS.
