Washing Machine

OWNER’S MANUAL

Read This Manual

Use all instructions and explanations of
the installation before use. Follow the
instructions carefully. Keep the operation
instructions handy for later use. If the
application is sold or passed on then ensure
that the new owner always receives those
operation instructions.
CONTENTS

SAFETY INSTRUCTIONS
Safety Instructions .................................................. 2

INSTALLATION
Product Description ................................................ 6
Installation ........................................................... 7

OPERATIONS
Quick Start ............................................................. 10
Before Each Washing .............................................. 11
Detergent Dispenser ............................................... 12
Control Panel ......................................................... 13
Option.................................................................... 14
Programmes........................................................... 16
Washing Programmes Table ..................................... 17

MAINTENANCES
Cleaning And Care ................................................. 18
Trouble Shooting .................................................... 20
Technical Specifications ......................................... 21
Product Fiches ........................................................ 22

1
SAFETY INSTRUCTIONS

Safety Instructions
For your safety,the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Explanation of the symbols:
！ Warning!
This combination of symbol and signal word indicates a
potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.
Caution!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the
environment.
Note!
This combination of symbol and signal word indicates a
potentially dangerous situation which may result in
slight or minor injuries.
！ Warning! The electric shock!
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
• Before any maintenance the device, unplug the appliance
from the mains.
• Always unplug the machine and turn off the water supply
after use. The max. inlet water pressure, in pascals. The
min. inlet water pressure, in pascals.
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
2
SAFETY INSTRUCTIONS
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must be
connected by a qualified technician in accordance with
the manufacturer's instructions and local safety
regulations.
Risk to children!
• EN countries: the appliance can be used by children aged
from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Children of less than 3years should be supervised to
ensure that they do not play with appliance.
• Animals and children may climb into the machine. Check
the machine before every operation.
• Kids should be supervised that they do not play with the
appliance.
• Glass door may be very hot during the operation. Keep
kids and pets far away from the machine during the
operation very wet rooms as well as in the rooms with
explosive or caustic gas.
• Remove all packages and transport bolts before using
the appliance. Otherwise, serious damage may result.
• Plug must be accessible after installation.
Risk of explosion!
• Do not wash or dry articles that have been cleaned in,
washed in, soaked in, or dabbed with combustible or
explosive substances( such as wax, oil, paint, gasoline,
degreasers,dry-cleaning solvents, kerosene, etc.) This
3
SAFETY INSTRUCTIONS
may result in fire or explosion.
• Before hand thoroughly rinse items of washing by hand.
Caution! Installing the product!
• This washing machine is for indoor use only.
• It isn't intended to be built-in using.
• The openings must not be obstructed by a carpet.
• Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive
or caustic gases.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
• Remove all packages and transport bolts before using
the appliance. Otherwise, serious damage may result.
Risk of damaging appliance!
• Your product is only for home use and is only designed
for the textiles suitable for machine washing.
• Do not climb up and sit on top cover of the machine.
• Do not lean against machine door.
• Cautions during Handling Machine:
1.Transport bolts shall be reinstalled to the machine by
a specialized person.
2.The accumulated water shall be drained out of the
machine.
3.Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Machine door can
not be used as the handle during the conveyance.
4.This appliance is heavy. Transport with care. Please do
not close the door with excessive forces. If it is found
difficult to close the door, please check if the clothes are
4
SAFETY INSTRUCTIONS
put in or distributed well.
• It is forbidden to wash carpets.
Operating the appliance!
• Before washing the clothes at first time, the product shall
be operated in one round of the whole procedures
without the clothes inside.
• Flammable and explosive or toxic solvents are forbidden.
Gasoline and alcohol etc.Shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for drum.
• Make sure that all pockets are emptied. Sharp and rigid
items such as coin,brooch,nail,screw or stone etc. may
cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained before opening its door.Please do not open
the door if there is any water visible.
• Be careful of burning when the product drains hot
washing water.
• Never refill the water by hand during washing.
• After the program is completed, Please wait for two
minutes to open the door.
Packaging/Old appliance
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU.To prevent possible harm to the environment or
human health from uncontrolled waste disposal,recycle
it responsibly to promote the sustainable reuse of
material resources.To return your used device, please use
the collection systems or contact the retailer where the
product was purchased. They return and can take this
product for environmental safe recycling.

5
INSTALLATION
Product Description
Top cover

Water supply hose

Control panel

Power supply cord

Detergent dispenser

Drum

Door
Service filter
Drain hose

Note!
• The product line chart is for reference only, please refer to real product as
standard.

Accessories

Transport Supply hose Supply hose hot Drain hose support Owner’s manual
hole plug cold water water (optional) (optional )

6
INSTALLATION
Installation
Installation area
！ Warning!
• Stability is important to prevent the product from
wandering!
• Make sure that the product should not stand on w
w
the power cord.
W> 20mm

Before installing the machine, the location characterized

as follows shall be selected:
1.Rigid, dry, and level surface.
2.Avoid direct sunlight.
3.Sufficient ventilation.
4.Room temperature is above 0°C.
5.Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
！ Warning!
• Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
• There is a risk of suffocation ! Keep all packaging
well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
！ Warning!
• You must remove the transport bolts from the backside before using the product.
• You’ll need the transport bolts again if you move the product , so make sure
you keep them in a safe place.

Please take the following steps to remove the bolts:

1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
7
INSTALLATION

Levelling the washing machine

！ Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
1 2 3 4
Lock nut
foot
Raise Lower

Connect Water Supply Hose

！ Warning!
• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
1 2 slide bushing 3 4

clamp nut

Loosen clamp nut and Tighten clamp nut Press slide bushing, Connection finished
four bolts insert inlet hose into
connecting base
2.Connection between screw tap and inlet hose.
slide bushing

Tap with threads and inlet hose Special tap for washing machine

9
8
INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
water Inlet valve water supply hose

Drain Hose
！ Warning!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
Max.100cm

Min.60cm

Water
trough

Note!
• If the machine has drain hose support, please install it like the following .

Trough
Hose Retainer
Max.100cm
Min.60cm

d
B in
Max.100cm
Min.60cm

！ Warning!
• When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.

10
9
OPERATIONS
Quick Start
Caution!
• Before washing, please make sure it’s installed properly.
• Before washing at first time, the washing machine shall be operated in one
round of the whole procedures without clothes in as follows.

1. Before Washing
1 2 3 4 5
Main
wash

Softener

Prewash

Plug in Open tap Load Close door Add detergent

Note!
• Detergent only need to be added in "case I “after selecting pre-washing for
machines with this function.

2. Washing
1 2 3 4

Power On Select Programme Select function or Start up

default
Note!
• If default is selected, step 3 can be skipped.

3. After Washing
The door lock and the [Start/Pause] lights flash with the buzzer beeping.

10
OPERATIONS

Before Each Washing

• The working condition of the washer should be(0-40)°C.If used under 0°C,the
inlet valve and draining system may be damaged. If the machine is placed under
condition of 0°Cor less, then it should be transferred to normal ambient
temperature to ensure the water supply hose and drain hose are not frozen
before use.
• Please check the labels and the explanation of using detergent before wash. Use
non-foaming or less-foaming detergent suitable for machine washing properly.

Check the label Take out the items out of Knot the long strips,zip or
the pockets button

Put small clothes into the Turn easy-pilling and Separate clothes with
pillow slip long-pile fabric inside out different textures

！ Warning!
• When washing a single clothes, it may easily cause great eccentricity and give
alarm due to great unbalance. Therefore it is suggested to add one or two
more clothes to be washed together so that draining can be done smoothly.
• Don’t washing the clothes touching with kerosene, gasoline, alcohol and
other flammable materials.

10
11
OPERATIONS
Detergent Dispenser
I Pre wash detergent
II Main wash detergent
Softener

Dam-board Dam-board

Liquid detergent Powder detergent Pull out the dispenser

Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.

Programme Programme
Baby Care Cotton 60° C
Sports Cotton 40° C
Synthetic Cotton 20° C
Mixed Quick 15’
Delicate ECO Wash
Wool Rinse&Spin
Drain Only Spin Only
Cotton Intensive

Means must ○　Means optional

Note!
• As for the agglomerated or ropy detergent or additive, before they are
poured into the detergent box, it is suggested to use some water for
dilution to prevent the inlet of detergent box from being blocked and
overflowing while filling water.
• Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.

10
12
OPERATIONS

Control Panel
Model:MFL80-ES1200

Cotton Intensive

ECO Wash On/Off

14 11 13 12 5

Note!
• The chart is for reference only, Please refer to real product as standard.

10
13
OPERATIONS

11 On/Off 12 Start/Pause
Product is switched on or off. Press the button to start or pause the
washing cycle.
3 Option 4 Programmes
This allows you to select an additional Available according to the laundry type.
function and will light when selected.
5 Display
The display shows the settings, estimated time remaining, options, and status messages
for your washer. The display will remain on through the cycle.

B A Wash Time Delay Time

B Door Lock C Child Lock

A C

Option
Delay Delay
Set the Delay function:
1. Select a programme
2.Press the Delay button to choose the time(the delaying time is 0-24 H.)
3.Press [Start/Pause] to commence the delay operation

On/off Delay Start/Pause

Choose the Programme Setting time

Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before
starting the programme. If the programme already started, should press the
[On/Off] button to reset the programme.
Caution!
• If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and when the power is restarted, press the
[Start/Pause]button the program will continues.

/ My Cycle
Memory the frequently used programmes
Press [Speed] 3sec. to memory the running programme.The default is cotton.

10
14
OPERATIONS

Child Lock
To avoid mis operation by children.

On/off Start/Pause Delay Speed

Press [Delay] and [Speed]

3 sec. till buzzer beep.
Caution!
• Press the two button 3sec. also to be released the function.
• The “Child Lock” will lock all buttons except [ On/Off ].
• Cut off the power supply , the kid’s protection is to be released .
• The child lock will remain effective when the power is resumed for some models.

Temp Temp
Press the button to regulate the temperature(Cold,20℃, 30℃, 40℃,60℃,90℃)

Speed Speed
Press the button to change the spin speed.
1000: 0-400-600-800-1000 1200: 0-400-600-800-1000-1200
1400: 0-400-600-800-1000-1200-1400

Mute the buzzer

On/off Start/Pause Temp

Press the[Temp] button for 3sec.

the buzzer is mute.
To act the buzzer function, press the two buttons again for 3 seconds. The setting
will be kept until the next reset.

Caution!
• After Mu ting the buzzer function, the sounds will not be activated any more.

Power off memory

For the convenience of the users, this program remember the washing program
and function that is the choice of the users at the last time. The next time when
selecting the program Memory,this machine will run the program of your memory
automatically.

10
15
OPERATIONS
Programmes
Programmes are available according to thelaundry type.
Programmes
Cotton To increase the washing effects, main additional washing time is
Intensive increased.It is recommended to wash the clothes for babies or
worn by the persons with allergic skin.
Synthetic Wash synthetic articles, for example: shirts, coats, blending. While
washing the knitting textiles, detergent quantity shall be reduced
due to its loose string construction and easily forming bubbles.
Baby Care Washing the baby’s clothes, it can make the baby's wear cleaner and
make the rinse performance better to protect the baby skin.
Mixed Mixed load consisting of textiles made of cotton and synthetics.
Eco Wash As for few light dirty clothes, the maximum temperature of
washing is limited to 40°C, and saving more energy.
Sports You can select this procedure to wash the activewear.
Quick 15’ This procedure is suitable for washing few and not very dirty
clothes quickly.
Delicate For delicate, washable textiles, e.g. made of silk, satin, synthetic
fibres or blended fabrics.
Wool Hand or machine-washable wool or richwool textiles.Especially
gentle wash programme to prevent shrinkage, longer programme
pauses (textiles rest in wash liquor).
Spin Only Extra spin with selectable spin speed.
Rinse&Spin Extra rinse with spin.

Drain Only Drain off the water .

10
16
OPERATIONS

Washing Programmes Table

Model:MFL80-ES1200

Programme Load(kg) Temp. Default Time Default Speed

(°C)
6.0 6.0 7.0 7.0 8.0 8.0 6.0 6.0 7.0 7.0 8.0 8.0
6.0 7.0 8.0 Default
1200 1400 1200 1400 1200 1400 1200 1400 1200 1400 1200 1400
Cotton 6.0 7.0 8.0 40 1:58 1:58 1:58 1:58 2:00 2:00 1000 1000 1000 1000 1000 1000
Intensive
Cotton 60°C 6.0 7.0 8.0 60 3:42 3:17 3:46 3:39 3:49 3:49 1200 1400 1200 1400 1200 1400
Cotton 40°C 6.0 7.0 8.0 40 3:38 3:18 3:42 3:35 3:49 3:49 1200 1400 1200 1400 1200 1400
Cotton 20°C 6.0 7.0 8.0 20 1:13 1:13 1:13 1:13 1:22 1:22 1000 1000 1000 1000 1000 1000
Quick 15’ 2.0 2.0 2.0 Cold 0:15 0:15 0:15 0:15 0:15 0:15 800 800 800 800 800 800
ECO Wash 2.0 2.0 2.0 30 1:06 1:06 1:06 1:06 1:04 1:04 800 800 800 800 800 800
Rinse&Spin 6.0 7.0 8.0 0:31 0:31 0:31 0:31 0:35 0:35 1000 1000 1000 1000 1000 1000
Baby Care 6.0 7.0 8.0 60 1:39 1:39 1:39 1:39 1:50 1:50 1000 1000 1000 1000 1000 1000
Sports 3.0 3.5 4.0 40 1:19 1:19 1:19 1:19 1:27 1:27 800 800 800 800 800 800
Synthetic 3.0 3.5 4.0 40 1:33 1:33 1:33 1:33 1:17 1:17 1200 1200 1200 1200 800 800
Mixed 6.0 7.0 8.0 40 1:13 1:13 1:13 1:13 1:19 1:19 1000 1000 1000 1000 1000 1000

Delicate 2.5 2.5 2.5 30 1:00 1:00 1:00 1:00 1:10 1:10 600 600 600 600 600 600
Wool 2.0 2.0 2.0 40 1:06 1:06 1:06 1:06 1:04 1:04 400 400 400 400 400 400

Drain Only 0:01 0:01 0:01 0:01 0:01 0:01 0 0 0 0 0 0

Spin Only 6.0 7.0 8.0 0:12 0:12 0:12 0:12 0:13 0:13 1000 1000 1000 1000 1000 1000
• The energy class is A+++
Energy test program: Cotton 60 °C /40 °C .
Speed: the highest speed; Other as the default.
Half load for 6.0Kg/7.0Kg/8.0kg machine:3.0Kg/3.5Kg/4.0kg.
• “Cotton 60 °C /40 °C ” are the “standard Cotton 60 °C /40 °C ” programme and the
standard washing programs to which the information in the label and the fiche
relates, and they are suitable to clean normally soiled cotton laundry and that they
are the most efficient programmes in terms of combined energy and water
consumptions for washing that type of cotton laundry,that the actual water
temperature may differ from the declared cycle temperature.
Note!
• The parameters in this table are only for user's reference. The actual parameters
maybe different with the parameters in above mentioned table.
10
17
MAINTENANCES

Cleaning And Care

！ Warning!
• Before your maintenance starts, please unplug the machine and close the tap.

Cleaning The Cabinet

Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Note!
• Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or
chemical products,etc.

Cleaning The Drum

The rusts left inside the drum by the metal articles shall be removed immediately
with chlorine-free detergents.
Never use steel wool.
Note!
• Don’t put laundry in the washing machine during the drum cleaning.

Cleaning The Door Seal And Glass

Wipe the glass and seal after each wash to remove lint and
stains. If lint builds up it can cause leaks.Remove any coins,
buttons and other objects from the seal after each wash.
Cleaning The Inlet Filter
Note!
• Inlet filter must be cleaned if there is less water.
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the water supply hose.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside of the machine.
2.Pull out the filter with long nose pliers and reinstall
it back after being washed.
3.Use the brush to clean the filter.
4.Reconnect the inlet pipe.
10
18
MAINTENANCES
Note!
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.

Clean The Detergent Dispenser

1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
1 2 3 4

Pull out the dispenser Clean the dispenser Clean inside the recess Insert the dispenser
drawer with press the A drawer under water with an old toothbrush drawer

Note!
• Do not use alcohol,solvents or chemical products to clean the machine.

Cleaning The Drain Pump Filter

！ Warning!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the washing.
• Clean the filter periodically to ensure the normal operation of washing machine.
1 2 3 4
。

Open the Service filter Open the filter by turning Remove extraneous Close the lower cover cap
to the counter clockwise matter
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should
be inserted aligning to hole plates otherwise water may leak;
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate
lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can be hot water
in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance
has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
10
19
MAINTENANCES

Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.

Description Reason Solution

Washing machine Restart after the door is closed
Door is not closed properly
cannot start up Check if the clothes is stuck
Door can’t be Washer's safety Disconnect the power, restart
opened protection design is working the product
The connection between inlet Check and fasten water pipes
Water leakage
pipe or outlet hose is not tight Clean up outlet hose
Detergent residues Detergent is dampened Clean and wipe the detergent
in the box or agglomerated box
Indicator or display Disconnect the power Check if the power is shut
does not light PC board or harness has down and the power plug is
connection problem connected correctly
Check if the fixing (bolts) have
Abnormal noise been removed
Check it’s installed on a solid
and level floor

Description Reason Solution

Restart after the door is closed
Door is not closed properly
Check if the clothes is stuck
Water injecting Check if the water pressure is
problem while too low
washing Straighten the water pipe
Check if the inlet valve filter is blocked
Overtime water draining Check if the drain hose is blocked

Water overflow Restart the washer

Please try again first, call up
Others service line if there are still
troubles
Note!
• After the check, activate the appliance. If the problem occurs or the display
shows other alarm codes again, contact the service.

10
20
MAINTENANCES

Technical Specifications
Power Supply 220-240V~,50Hz

850mm
MAX.Current 10A

Standard Water Pressure 0.05MPa~1MPa

595mm D

Model Washing Dimension Net Weight Rated Power

Capacity (W*D*Hmm)
MFL80-ES1200 8.0kg 595*565*850 68kg 2000W

10
21
24
MAINTENANCES
Model MFL80-ES1200

Capacity 8kg

Spin Speed 1200/1200/1400 rpm

Energy efficiency class 11 A +++

Annual energy consumption 196kWh /annual

12
Power consumption of off - mode 0.5W

Power consumption of Left on -mode 1.0W

Annual water consumption 13 11000L /annual

Spin- drying efficiency class B

14
Standard washing cycle 15 Cotton

Energy consumption of the standard 60°C at full load 0.97kwh /cycle

Energy consumption of the standard 60°C at partial load 0.75kwh /cycle

Energy consumption of the standard 40° C at partial load 0.72kwh /cycle

Programme duration of standard 60° C at full load 232min

Programme duration of standard 60°C at partial load 215min

Programme duration of standard 40°C at partial load 214min

Water consumption of the standard 60° C at full load 54L /cycle

Water consumption of standard 60°C at partial load 45L /cycle

Water consumption of the standard 40° C at partial load 45L /cycle

Remaining moisture content of the standard 60°C at full load 50%

Remaining moisture content of the standard 60°C at partial load 55%

Remaining moisture content of the standard 40°C at partial load 55%

Noise level of washing 558dB (A)

Noise level of spinning 76/76/78dB (A)

10
22
MAINTENANCES

Note!
• Programme setting for testing in accordance with applicable standard
En60456.
• When using the test programmes, wash the specified load using the
maximum spin speed.
• The actual parameters will depend on how the applicance is used,and
maybe different with the parameters in above mentioned table.
• The noise emissions during washing/spinning for th standard washing
cycle at full load.

Remarks:
11 The energy efficiency class is from A(highest efficiency) to D (lowest efficiency).
12 Energy consumption per year, based on 220 standard washing cycles for
standard programme at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend
on how the appliance is used.
13 Water consumption per year based on 220 standard washing cycles
for standard programme at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
14
Spin-drying efficiency class B on a scale from G (least efficient) to A (most
efficient)
15 The standard 60°C programme and the standard 40°C programme are the
standard washing programmes. These programmes are suitable to clean
normally soiled cotton laundry and they are the most efficient programmes in
terms of combined energy and water consumptions for washing that type of
cotton laundry. The actual water temperature may differ from the declared
cycle emperature.
Please choose the suitable type of detergent for the various washing
temperatures to get the best washing performance with less water and energy
consumption.

10
23