WA

200PZ

Wheel Loader
WA200PZ-6

ENGINE POWER
95,0 kW / 127 HP @ 2.000 rpm
OPERATING WEIGHT
11.295 - 11.855 kg
BUCKET CAPACITY
1,9 - 2,1 m³
Walk-Around
The highly versatile Komatsu WA200PZ-6 wheel loader features a perfect mix of power,
comfort and reliability. With the new ecot3 engine and an advanced hydrostatic drive line
it offers exceptional tractive force and ultra-low fuel consumption. This machine sets new
efficiency standards for wheel loaders.

High productivity & low fuel consumption

• High-torque and low-consumption ecot3 Komatsu engine
• Highly efficient hydrostatic drive line
• Best-in-class dumping height and maximum stability
• Boom suspension system for minimum spillage (option)
• Meets EU Stage IIIA and EPA Tier III

Versatile PZ-linkage
• Combines advantages of Z-linkage with
parallel lift
• Large break-out force for easy bucket fill
• High tilt forces for controlled work with
heavy attachments
• Parallel lift for fast pallet handling
• Superb visibility to front attachments

2
 WA200PZ-6
ENGINE POWER
95,0 kW / 127 HP @ 2.000 rpm

First-class operator comfort

• Large SpaceCab™ cab with increased leg space
• Outstanding 360° visibility
• PPC-Multifunction lever
• Deluxe heated, air-suspended driver seat
• Electronically controlled air conditioning

Easy maintenance
• Wide core radiator with auto reversible fan speeds up cleaning
• Factory fitted automatic lubrication system (optional)
• Large gull-wing doors for easy access to service points
• Equipment Management and Monitoring System (EMMS)
• Robust components with a long service life

Komatsu Satellite
Monitoring System

Responsive hydrostatic drive

line (HST)
• Instant response for fast loading cycles
• Easy control in confined areas
• Advanced traction control system for best traction and
minimized tyre wear
• Top speed selection for increased safety

3
High Productivity & Low Fuel Consumption
Low consumption ecot3 Meets EU Stage IIIA Best in class dumping height
engine The new Komatsu ecot3 engine The long lifting frame allows the
The Komatsu SAA4D107E-1 engine technology reduces NOx and best in class dumping height of
provides high torque, a better per- particle emissions, fuel consump- 2,96 m with a straight tipping load
formance at low speed and low fuel tion and noise level. The Komatsu of 8,85 tonnes (with 2,0 m³ univer-
consumption. This ecot3 engine SAA4D107E-1 is certified for EPA sal bucket, measured to the cutting
features a new combustion cham- Tier III and EU Stage IIIA emission edge). With this working range,
ber design with optimised ignition regulations. loading high feeders or trucks be-
and combustion timing. The operat- comes easy and fast.
ing pressure of the new common
rail system was increased for im-
proved injection and fuel efficiency.
The air-to-air intercooler reduces
the temperature of the compressed
air supplied by the turbo charger to
the cylinders, and further improves
Injector
fuel consumption.
Electronic Control Unit

Highly efficient hydrostatic

drive line
The electronically controlled
variable pump and 2-motor system
Common rail
allow highly efficient and powerful
operation. At low speeds both mo- Supply pump
tors are engaged to provide highest High pressure common rail fuel injection
torque. Bucket filling and scooping
are easy, as maximum rim pull is
provided from zero travel speed.
At high speeds, a clutch cuts off
the low speed motor to eliminate
drag and achieve excellent fuel ef-
ficiency.

Air cooler

Air-to-air charge air cooling system

Low speed motor Transfer

Pump

Engine

High speed motor

Electronically controlled HST

4
Boom suspension system
(optional)
The boom suspension system
reduces the shocks in the boom
when driving with loads. Mate-
rial can be transported at higher
speeds with minimum spillage.
When travelling below 7 km/h, the
boom suspension is automatically
deactivated for precise pallet load-
ing into trucks.

5
Versatile PZ-Linkage
One machine for all Parallel lift for fast pallet
applications handling
The new Komatsu WA200PZ-6 is With the parallel lift PZ-linkage,
the right choice for any job. The pallet moving becomes easy. The
parallel lift Z-bar = “PZ” linkage parallelism has been optimized
combines the advantages of the for safe work over the entire lifting
approved Z-bar linkage with the range. The excellent visibility of the
features of parallel lift kinematics. front attachment allows an easy
pick-up of pallets and precise work
when loading onto trucks.
Easy bucket fill
The superior break-out force of the
WA200PZ-6 turns loading into a
child’s play, even for an untrained
operator. More experienced work-
ers will also appreciate this feature,
particularly when working with high
Excellent visibility of the front attachment
density material such as heavy soil
or aggregate.

6
Controlled work with heavy
attachments
With the new linkage design, tilting
forces reach the optimal level, es-
pecially at maximum boom height.
This is essential for controlling large
attachments such as log grapples
or oversized buckets. The new
WA200PZ-6 is the ideal choice for
working with heavy attachments.

7
Responsive Hydrostatic Drive Line (HST)
Instant response for fast Top speed selection for
loading cycles increased safety
The Komatsu HST drive line fea- The variable shift control allows
tures exceptional responsiveness setting the top speed for improved
that results in quick acceleration safety and precision. The top speed
and fast forward/reverse changes. can be adjusted to the working
The drive line reacts to the opera- conditions: max speed for fast trav-
tor’s command without any time lag elling between jobsites, reduced
and instantly provides torque at the speed to increase the safety when
wheels. This allows for fast loading working on jobsites with high traffic
cycles and higher productivity. or for working in confined spaces.
In position 1, the speed can be
continuously adjusted between 4
Easy control in confined areas
and 14 km/h with the fine control.
The self braking effect of the HST This allows constant low driving
drive line slows down the ma- speeds that are perfectly adjusted
chine when the accelerator pedal to applications such as lawn mow-
is released. Uncontrolled rolling is ing or milling jobs.
prevented, and safety is greatly im-
proved, especially when working in
confined spaces or inside industrial
buildings. In addition, brake wear is
practically eliminated.

Advanced traction control

system
The new advanced traction control
system lets the driver adjust trac-
tion precisely to working condi-
tions. The provided rim pull can be
set to 5 different levels to prevent
spinning wheels on any ground
conditions, even when operating on
snow. Constant traction increases
productivity and reduces tyre wear
and cost.

8
9
First-Class Operator Comfort
Large SpaceCab™ Electronically controlled air
Komatsu’s SpaceCab™ is among conditioning
the most spacious in its class and With the electronically controlled air
it has been lengthened for greater conditioning fitted as standard, the
leg room. It offers a driving conven- operator can feel at ease regardless
ience comparable to that of a pas- of the outside temperature. Con-
senger car. The cabin is mounted centration and productivity stays
on viscose shock absorbers that high all day.
guarantee low vibrations and sound
levels.
Additional comfort
Further standard features of the
Outstanding 360° visibility Komatsu SpaceCab™ are the CD
The large frameless windscreen radio, a “hot and cool” box for bev-
ensures an optimum view of the erages, several storage spaces and
bucket and tyres. The slanted en- adjustable arm rests on both sides.
gine hood gives an excellent view
to the rear.
PPC-Multifunction lever
The servo-assisted multi-function
Air-suspended, heated seat lever with an integrated forward/
The high comfort air-suspended reverse switch allows the simplest
seat, with lumbar support and mul- and most comfortable operation of
tiple possibilities for adjustments, the equipment. With one hand the
ensures the operator’s well being driver can simultaneously control
during the entire working day. All the attachment and switch be-
seats are equipped with a heating tween forward and reverse. As an
function to provide an easy start on additional option, the third spool
cold days. can be controlled by two buttons
on the multi-function lever for easy
work with a grapple or a high dump
bucket.

10
11
Easy Maintenance
Easy access to service points Wide core radiator with auto
For easy and safe opening the reverse fan
gull-wing doors are supported by A wide core radiator prevents
gas springs. The large doors give clogging even when working in a
a convenient access from ground dusty environment. To minimize
level to all daily service points. With manual cleaning, a reversible fan
long service intervals and all filters blows dust out, automatically or on
collected in a centralised arrange- demand. The “automatic reverse”
ment, machine downtime is re- function allows to set the clean-
duced to a minimum. ing length and the time between
cleaning to adjust perfectly to the
working conditions.
State-of-the-art monitoring
The equipment management and
monitoring system (EMMS) is Factory fitted automatic
clearly structured and easy to read. lubrication system (optional)
If a malfunction occurs, it is im- The automatic lubrication system
mediately displayed as plain text in reduces the daily service work to
the selected language. The system the absolute minimum. Robust pip-
features an error memory, a self- ing ensures consistent lubrication
diagnosis function and a display of and operating reliability, and sig-
service intervals. The EMMS gives nificantly increases the machine’s
timely notification of required oil service life. The system is elec-
and filter replacements. All informa- tronically monitored and features a
tion can also be accessed off-site signal light in the cabin.
via KOMTRAX™. The operator
and customer service engineer are
constantly informed about the ma-
chine’s state so that problems can
be prevented before they occur.

12
13
Komatsu Satellite Monitoring System
KOMTRAX™ can assist you with: For further details on KOMTRAX™,
please ask your Komatsu dealer for
Full machine monitoring the latest KOMTRAX™ brochure.
KOMTRAX™ is a revolutionary Get detailed operation data to know
machine tracking system designed when your machines are used and
to save you time and money. You how productive they are.
can now monitor your equipment
anytime and anywhere. Use valu- Total Fleet Management
able machine data received via the Keep track of the location of your
KOMTRAX™ web site to optimise machines at all times and discour-
your maintenance planning and age unapproved usage or theft.
machine performances.
Complete machine status
Receive warnings, alerts and cau-
tions, via a web site or by e-mail,
to help with maintenance planning
and for longer machine life.
 KOMTRAX™

Machine working time - With the “daily work- Maintenance planning - To increase produc- Fleet location - The machine list instantly
ing record” chart, get precise engine running tivity and improve maintenance planning, locates all your machines, even those in
time data: when your machine was started alerts indicate when items such as filters or other countries.
and when it was shut down, as well as total oil must be replaced.
engine running time.

Machine tracking during transport - When Alarm notifications - You can receive notifi- Added security - The “engine lock” feature
your machine is transported, KOMTRAX™ cation of alarms both via the KOMTRAX™ allows to program when a machine’s engine
sends travel messages to the web site or website and by e-mail. can be started. And with “geo-fence”,
by e-mail to inform you of its progress, and KOMTRAX™ sends notification every time
confirms when it reaches its destination. your machine moves in or out of a predeter-
mined operating area.

15
Robust and Reliable
Designed and built by
Komatsu
The engine, hydraulics, power train,
front and rear axles are original
Komatsu components. All these
components are subject to the
highest quality standards right
down to the smallest screw. All
components are fully co-ordinated
with one another, thus offering the
maximum efficiency and reliability.

Heavy-duty axles
The heavy-duty axles allow ex-
ceptional service life even under
the toughest working conditions.
As standard, the WA200PZ-6 is
equipped with torque propor-
tional differentials for work on
good ground conditions such as
on concrete yards or roads. The
optional limited slip differentials are
most suitable for soft and slippery
ground like sand or wet soil.

HST drive line with overrun

protection
The hydrostatic drive line is Wet multi-disc service brake Robust torsion-resistant main
equipped with an overrun protec- The multi-disc service brake is en- frame
tion that electronically limits the top capsulated and runs in an oil bath. The frame design with hinge points
speed when driving downhill and The brake stays clean and operates far apart guarantees the high sta-
thus ensures the long service life of at low temperature for increased bility for the overall construction
the power train and the drive line service intervals and a long lifetime. and reduces bearing stress in the
system. torsional ranges.

16
 Tailored Solutions
Working gear division
Komatsu wheel loaders combined
with a wide range of genuine
Komatsu attachments provide the
perfect solution for any industry
sector. For special applications
our “Working Gear” division offers
purpose-built machines and at-
tachments. The tailor made solu-
tions allow high performance and
outstanding reliability even under
toughest conditions.

Waste handling
We adapt our wheel loaders to the
different conditions that exist on
waste handling job sites. Along with
heavy duty attachments, we offer
solutions to protect your machine
against damage.

Timber industry
A wide range of options specifically
developed for the timber industry
are available: log grapples, wood
chip buckets, cameras, as well as
various protections and pre-filters.

Agriculture
Availability is the key. Komatsu
offers special protections - even
against corrosion - for constant
work in aggressive environments
such as fertilizer handling.

17
Buckets and Attachments
The WA200PZ-6 is outstanding industry, in landscaping companies machine and thus allows high-in-
due to its versatility. Whether used or in community services, the right tensity operation.
industrially in structural or civil solution is always available for your Examples from the comprehensive
engineering, earthmoving, road requirements. range of original attachments are:
construction, waste recycling, The optional 4-point quick-coupler
agriculture, forestry or the timber adds increased versatility to the

Universal bucket Earthmoving bucket Stock pile bucket

This type of bucket is impressive The earthmoving bucket with a The stock pile bucket is the right
because of its excellent penetra- one-piece bucket bottom is suited solution for handling loose and rela-
tion and loosening properties and both for earthworks and loading tively light materials. The straight
its good material holding proper- cohesive material. The slanted sidewalls ensure a high bucket
ties. This universal bucket can be sides give powerful penetration. It capacity, the rear edge makes
equipped with flush mount adapt- is equipped either with flush mount levelling and cleaning up jobsites
ers and interchangeable teeth. adapters and interchangeable teeth easy. This stock pile bucket can be
or also with a rear removable edge. equipped with flush mount adapt-
ers and interchangeable teeth or a
bolt-on cutting edge.

Hydraulic quick-coupler Mulch grab bucket High dump bucket

The WA200PZ-6 can change at- Perfectly suited for picking up bulky For maximum dumping heights
tachments in a matter of seconds and compressible materials like with light materials like coal or
with the HD hydraulic quick-cou- gardening or plastic waste, etc. woodchips. The dump cylinders are
pler, available as optional equip- Without the side plates, this bucket located either inside or outside the
ment. can be used also as a grapple. bucket.

18
 Specifications
ENGINE BRAKES

Model .......................................................... Komatsu SAA4D107E-1 Operating brakes............. Completely hydraulic dual-circuit system,
Common rail direct injection, water-cooled, running in oil bath, multi-disc brakes on
emissionised, turbocharged, after-cooled diesel all wheels, service-free
Engine power Parking brake ................ Operated mechanically, running in oil bath,
at rated engine speed.................................................... 2.000 rpm multi-disc brake, service-free
ISO 14396 ...........................................................95,0 kW / 127 HP Emergency brake ..........................................Uses the parking brake
ISO 9249 (net engine power) ..............................94,0 kW / 126 HP
Max. torque / engine speed ...............................586 Nm / 1.400 rpm
No. of cylinders ................................................................................4
Bore × stroke...............................................................107 × 124 mm
Displacement...........................................................................4,46 ltr HYDRAULIC SYSTEM
Lubricating system ......... Gear pump, pressure feed lubrication filter
Hydraulic pump ................................................................Gear pump
Filter............................................................................ Main-flow filter
Working pressure (max)..........................................................206 bar
Electrical system .........................................................................24 V
Circulating capacity of the hydraulic pump................ 85 + 54 ltr/min
Battery .............................................................................. 2 × 110 Ah
No. of boom/bucket cylinders.......................................................2/1
Alternator.....................................................................................60 A
Type ............................................................................. Double-action
Air-filter type .................... Dry-air filter with automatic dust emission
Bore diameter × stroke
and preliminary purification including a dust display
Boom cylinder .............................................................125 × 674 mm
Bucket cylinder............................................................150 × 504 mm
Hydraulic control lever......................... Servo-controlled, single lever
Hydraulic cycle with rated load bucket filling
TRANSMISSION Raise time................................................................................... 5,7 s
Lowering time (empty)................................................................ 3,2 s
Drive system....... Electronically controlled hydrostatic transmission, Dumping time ............................................................................. 1,6 s
switchable in all directions under full power.
Fixed ratio gearbox. Variable speed limiter
Hydrostatic pump.......................................... 1 variable piston pump
Hydrostatic motor........................................ 2 variable piston motors
Speed ranges (forwards/backwards) ............................................4/4 STEERING SYSTEM
Max. travel speeds (forwards/backwards) (Tyres 20.5 R25)
1. speed range .................................................................. 4-14 km/h System ..................................................... Articulated frame steering
2. speed range ......................................................................14 km/h Type ......................................... Completely hydraulic power steering
3. speed range ......................................................................22 km/h Steering angle to either side......................................................... 40°
4. speed range ......................................................................38 km/h Steering pump..................................................................Gear pump
Working pressure....................................................................206 bar
Pumping capacity................................................................85 ltr/min
No. of steering cylinders ..................................................................2
Type ............................................................................. Double-action
CHASSIS AND TYRES Bore diameter × stroke..................................................70 × 453 mm
Smallest turn (outer edge of the tyre 20.5 R25) .................5.150 mm
System ......................................................................... 4-wheel drive
Front axle......................................HD axle, semi-floating, fixed type,
TPD-differential, (LSD-differential optional)
Rear axle ....................... HD axle, semi-floating, centre-pin support,
24° swing angle, TPD-differential, CABIN
(LSD-differential optional)
Reduction gear ........................................................ Spiral bevel gear Two-door SpaceCab™ in conformity with ISO 3471 with ROPS (roll
Differential .................................................... Straight bevel gear pair over protective structure) in conformity with SAE J1040c and FOPS
Final drive .............................................. Planetary gear in an oil bath (falling object protective structure) in conformity with ISO 3449. The
Tyres ................................................................... 20.5 R25 (standard) air-conditioned pressurised cabin is mounted upon hydrobearings
and is noise dampened.

SERVICE REFILL CAPACITIES

ENVIRONMENT
Cooling system...........................................................................17 ltr
Fuel tank...................................................................................177 ltr Engine emissions .......................... Fully complies with EU Stage IIIA
Engine oil.................................................................................15,5 ltr and EPA Tier III exhaust emission regulations
Hydraulic system........................................................................58 ltr Noise levels
Axle (both front and rear axle) ....................................................18 ltr LwA external ................................104 dB(A) (2000/14/EC Stage II)
Transfer......................................................................................5,0 ltr LpA operator ear........................72 dB(A) (ISO 6396 dynamic test)

19
Dimensions & Performance Figures

d a

c
f
H
b

e F
E B
D A
C

MEASUREMENTS AND WORKING SPECIFICATIONS

Earthmoving Stockpile Universal
w. teeth w. BOC w. teeth w. BOC w. teeth w. BOC
Bucket mount (direct/quick-coupler) direct direct direct direct direct direct
Bucket capacity (heaped, ISO 7546) m³ 1,9 1,9 2,0 2,1 1,9 2,0
Sales code C42 C43 C22 C23 C02 C03
Material density (max) t/m³ 1,85 1,75 1,75 1,65 1,9 1,75
Bucket weight kg 870 945 890 965 835 910
Static tipping load, straight kg 8.935 8.790 8.890 8.745 9.010 8.850
Static tipping load, 40° articulated kg 7.830 7.690 7.785 7.645 7.900 7.750
Break-out force hydraulic kN 118,6 111,8 114,8 108,5 117,3 110,5
Lifting capability hydr. at ground level kN 112,4 112,7 112,6 112,9 112,3 112,6
Operating weight kg 11.380 11.455 11.400 11.475 11.345 11.420
Turning radius at corner of tyres mm 5.150 5.150 5.150 5.150 5.150 5.150
Turning radius at bucket edge mm 5.735 5.700 5.745 5.710 5.740 5.705
a Reach at 45° mm 1.055 940 1.075 965 1.060 950
b Dump height at 45° mm 2.895 2.975 2.875 2.950 2.890 2.965
c Hinge pin height mm 3.885 3.885 3.885 3.885 3.885 3.885
d Height top edge of bucket mm 5.160 5.160 5.165 5.165 5.150 5.150
e Digging depth mm 85 110 85 110 85 110
f Max. loading height at 45° mm 3.630 3.630 3.630 3.630 3.630 3.630
A Overall length, bucket grounded mm 7.215 7.100 7.245 7.130 7.225 7.110
B Wheelbase mm 2.840 2.840 2.840 2.840 2.840 2.840
C Bucket width mm 2.545 2.540 2.545 2.540 2.545 2.540
D Width over tyres mm 2.470 2.470 2.470 2.470 2.470 2.470
E Track width mm 1.930 1.930 1.930 1.930 1.930 1.930
F Ground clearance mm 495 495 495 495 495 495
H Overall height mm 3.180 3.180 3.180 3.180 3.180 3.180

All measurements with tyres 20.5 R25

BOC: bolt-on cutting edge

20
CHANGE IN DATA CAUSED BY:

Tyres L2 Tyres L5

Operating weight kg -330 +680

Static tipping load, straight kg -220 +460
Static tipping load, 40° articulated kg -195 +400
Overall length, bucket grounded mm --- ---
Reach at 45° mm +70 -20
Dump height at 45° mm -75 +25
Width over tyres mm -75 +0
Overall height mm -75 +25

TYPICAL MATERIAL DENSITY – LOOSE

Earthmoving Stockpile Universal (IN kg/m³)
w. teeth w. BOC w. teeth w. BOC w. teeth w. BOC Basalt 1.960
QC QC QC QC QC QC Bauxite, Kaolin 1.420
1,9 2,0 2,0 2,1 1,9 2,0 Earth, dry, ex store 1.510
C72 C73 C66 C67 C62 C63 Earth, wet, excavated 1.600
1,75 1,65 1,65 1,55 1,75 1,65 Gypsum, broken 1.810
860 935 875 950 825 900 Gypsum, crushed 1.600
8.440 8.280 8.385 8.260 8.430 8.290 Granite, broken 1.660
7.355 7.205 7.305 7.185 7.355 7.215 Limestone, broken 1.540
96 91,6 93,6 89,3 95,3 90,9 Limestone, crushed 1.540
115,4 114,2 115,4 112,3 115,6 114,1 Gravel, unscreened 1.930
11.765 11.840 11.780 11.855 11.730 11.805 Gravel, dry 1.510
5.150 5.150 5.150 5.150 5.150 5.150 Gravel, dry, 6-50 mm 1.690
5.800 5.765 5.810 5.775 5.810 5.770 Gravel, wet, 6-50 mm 2.020
1.215 1.100 1.235 1.120 1.205 1.095 Sand, dry, loose 1.420
2.750 2.830 2.730 2.805 2.730 2.805 Sand, damp 1.690
3.885 3.885 3.885 3.885 3.885 3.885 Sand, wet 1.840
5.315 5.315 5.315 5.315 5.290 5.290 Sand and clay, loose 1.600
75 100 75 100 95 120 Sand and gravel, dry 1.720
3.630 3.630 3.630 3.630 3.630 3.630 Sandstone 1.510
7.420 7.305 7.450 7.335 7.450 7.335 Slate 1.250
2.840 2.840 2.840 2.840 2.840 2.840 Slag, broken 1.750
2.545 2.540 2.545 2.540 2.545 2.540 Stone, crushed 1.600
2.470 2.470 2.470 2.470 2.470 2.470 Clay, natural 1.660
1.930 1.930 1.930 1.930 1.930 1.930 Clay, dry 1.480
495 495 495 495 495 495 Clay, wet 1.660
3.180 3.180 3.180 3.180 3.180 3.180 Clay and gravel, dry 1.420
Clay and gravel, wet 1.540

21
Dimensions & Performance Figures
FORK TINES
Sales code C57
Fork tine length mm 1.200
A Max. reach at ground level mm 985
B Max. reach mm 1.620
C Max. reach at max. stacking height mm 720 C
a Max. height fork-carrier mm 4.705
b Hinge pin height mm 3.885 a
c Max. stacking height mm 3.765
b
d Height of forks at maximum reach mm 1.780
c
B
Max. tipping load, straight kg 6.310
Max. tipping load, articulated kg 5.520
d
Max. payload as per EN 474-3, 80% kg 4.415
Max. payload as per EN 474-3, 60% kg 3.325
Weight in working order with fork tines kg 11.470
A

HIGH-DUMP BUCKET
Type A B
Sales code Q39 Q41
Bucket capacity (heaped, ISO 7546) m³ 3,5 2,8
Material density t/m³ 0,8 1,0
Bucket width mm 2.740 2.550
Bucket weight without teeth kg 1.600 1.870
A Reach at 45° mm 1.540 1.460
a Height top edge of bucket mm 6.080 6.040
b Hinge pin height mm 4.790 4.800
c Max. loading height at 45° mm 4.640 4.650 a
d Dump height at 45° mm 4.385 4.240 b c A
Type A: dump cylinders located inside bucket d
Type B: dump cylinders located outside bucket

22
 H

F
a E
b
c

e
f

LOG GRAPPLE
Sales code Q55 A mm 970
Area m² 1,2 B mm 1.750
Max. payload kg 3.990 C mm 2.180
Grapple weight kg 800 D mm 2.405
E mm 1.490
F mm 735
G Max. tilt-back angle ° 52
H (at tilt-back angle 30°) mm 2.450
a (at tilt-back angle 30°) mm 4.725
b (at tilt-back angle 30°) mm 4.390
c mm 3.695
d mm 2.810
e mm 2.060
f mm 1.750

23
Wheel Loader
WA200PZ-6

Standard and Optional Equipment

ENGINE CABIN LIGHTING SYSTEM
Komatsu SAA4D107E-1 turbocharged common rail Spacious double door driver’s cab to DIN/ISO z 2 halogen main headlights z
direct injection diesel engine z ROPS/FOPS frame according to SAE z 2 spotlights at front and rear z
EU Stage IIIA/EPA Tier III compliant
Air-suspended, heated seat z Reversing light z
Fuel filter with water separator z
Electr. controlled air conditioning z Additional lights front and rear {
Engine cooling fluid corrosion resistor z
CD radio z Xenon working lights {
Alternator 60 A z
Hot and cool box z
Starter motor 4,5 kW/24 V z
All-round tinted glazing z
Batteries 2 × 110 Ah/2 × 12 V z
Front laminated glass z OTHER EQUIPMENT
Heated rear window z Z-bar boom with parallel movement
z
Rear window wiper z (PZ-kinematics)
TRANSMISSION AND BRAKES Sun visor z Counterweight z
Electronically controlled HST with 2-motor system z Seat belt (EU standard) z Electronically controlled load stabilizer (ECSS) {
Speed control with fine adjustment in Adjustable steering column z Special custom colour {
z
1st speed range {
12 V power supply { Anti-corrosion specification
Traction control system (TCS) z
Fire extinguisher { Waste handling equipment on request {
Fully hydraulic brake system z
Combined brake/inching pedal z
20 km/h limited hydrostatic driveline {
ATTACHMENTS
Creeping function: 1 - 4 km/h speed control { SERVICE AND MAINTENANCE
Hydraulic quick-coupler
{
Wide core radiator z (incl. additional side counterweights, large size)
Hydrostat-driven swing-out radiator fan with Universal buckets {
z
CHASSIS AND TYRES automatic reversing function {
Earthmoving buckets
Heavy-duty axles z EMMS (Equipment Management Monitoring {
Stock pile buckets
System) with self-diagnostic function and z
TPD-differential front and rear z High-dump buckets {
maintenance display
Power train guard z Log grapples {
KOMTRAX™ - Komatsu satellite monitoring system z
Limited-slip differential (LSD) front and rear { Fork carrier and tines {
Tool-set z
Tyres 17.5 R25 L2, L3, L5 { Waste handling high-dump bucket 2,3 m³
Turbo II air pre-cleaner, cyclone type { {
Tyres 20.5 R25 L2, L3, L5 { with protection grid
Automatic central lubrication {
Waste handling bucket 2,8 m³ {
Waste handling mulch grapple bucket 1,8 m³ {

HYDRAULIC SYSTEM Light material bucket 3,2 m³ {

2-spool main control valve z SAFETY EQUIPMENT Crane arm {

PPC control, 1-lever (Multi-function lever) z Emergency steering system z

Automatic return-to-dig z Horn z
Automatic boom kick-out z Vandalism protection z Buckets direct or quick-coupler mount, with teeth or
BOC (bolt-on cutting edge).
3-spool main control valve { Back-up alarm z
4-spool main control valve { Front screen protective grid { Further equipment on request
PPC fingertip control, 2, 3 or 4 levers { Beacon light {
The WA200PZ-6 is equipped in accordance with the
PPC Multi-function lever with add. 3rd spool Electronic anti-theft lock { safety regulations of the machinery guidelines 89/392
{
lever control Electronic anti-theft lock with master key EWG ff and EN474.
{
Electr. 3rd spool actuation on joystick { for fleet owners
z standard equipment
Biodegradable oil for hydraulic system { Battery main switch {
{ optional equipment

Your Komatsu partner:

Komatsu Europe
International NV
Mechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsu.eu

VESS002601 01/2009 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.

Printed in Europe – This specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.