NOTES:

1. COMMUNICATIONS SHELTER NOT SHOWN FOR CLARITY.

FOR COMMUNICATIONS SHELTER LOCATION SEE SCRRA DESIGN
CRITERIA.
2. CRITERIA SHOWN ON THIS DRAWING FOR PEDESTRIAN CROSSING
SHALL BE APPLIED WHEN A PEDESTRIAN CROSSING IS REQUIRED
AT OPPOSITE END OF PLATFORM. FOR ADDITIONAL INFORMATION
ON PEDESTRIAN CROSSING SEE SCRRA STANDARD DRAWING
ES4020 AND ES4021.

AT GRADE PED END OF END OF AT GRADE PED

CROSSING PLATFORM PLATFORM CROSSING

TO LOS ANGELES AWAY FROM LOS ANGELES

680'-0" PLATFORM (LIGHT POLES @ 160'-0" O.C. MAX.) 120'-0" 150'-0" (MIN)

60'-0" (FROM END

20'-0" 160'-0" 160'-0" 160'-0" 160'-0" 20'-0" OF CROSSING
-0"

85'-0" OR END OF
-0" 3'

PLATFORM IF
(TYP)
-0"

NO CROSSING)
N.
MI
16'
19'

NG
HC

PED XI
C TRACK B1 B3 B5 B7

TRACK
C B1 B3 B5 B7
-0"
-0"

N.
MI
-0" 16'
19'

58'-2"
OF PLATFORM

MINI-HIGH OVERPASS/UNDERPASS TO BE
GMF59PH
3'

PLATFORM LOCATED AT CENTER OF PLATFORM

C MINI-HIGH GMF59PHI INTER-TRACK
OR NEAREST TO MINI-HIGH PLATFORM FENCE
60'-0" PLATFORM
AS IS PRACTICABLE 68'-0"

MP36PH
ROTEM & BOMBARDIER CARS 69'-0"
END

SCALE: 1" = 30'-0" F125

A. CARLOS 05/21/08 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3002
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 05/18/20 OMIT CPUC RAMP & DETAILS, REVISE PLAN AND NOTES AC JMM THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED AS NOTED
C 05/31/17 REVISED NOTES (NOTE 8 OMITTED) AC LA WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF METROLINK STATION STANDARDS REVISION SHEET
B 10/04/16 ADDED CPUC RAMP AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY SIDE PLATFORMS D 1 OF 1
A 06-29-12 REVISED PLATFORMS AT MINI-HIGH LOCATIONS AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3002
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:45:38 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_2\ES3002.dgn
 NOTES:

1. CRITERIA SHOWN ON THIS DRAWING FOR PEDESTRIAN CROSSING

SHALL ALSO BE APPLIED WHEN A PEDESTRIAN CROSSING IS
REQUIRED AT OPPOSITE END OF PLATFORM. FOR ADDITIONAL
2. IF APPROVAL IS GRANTED FOR CONSTRUCTION OF CENTER
PLATFORM BY SCRRA ASSISTANT DIRECTOR, DESIGN THE
CONFIGURATION SHOWN ON THIS DRAWING IS RECOMMENDED.

AT GRADE PED END OF END OF AT GRADE PED

CROSSING PLATFORM PLATFORM CROSSING
TO LOS ANGELES AWAY FROM LOS ANGELES

680' PLATFORM (LIGHT POLES @ 160'-0" O.C. MAX.) 120' 150'-0" (MIN)
(FROM END
20' 160' 160' 160' 160' 20' 60' OF CROSSING
OR END OF
85' CAR LENGTH PLATFORM IF
MINI-HIGH

NG
(TYP) NO CROSSING)

XI
PLATFORM

PED
TRACK
C B1 B3 B5 B7
30'
N
MI

TRACK B1
C

58'-2"
C MINI-HIGH
OF

GMF59PH
PLATFORM

OVERPASS/UNDERPASS TO BE
PLATFORM LOCATED AT CENTER OF PLATFORM GMF59PHI
60' FENCING AT EDGE OF R.O.W.
END

(DISTANCE FROM CENTERLINE OR NEAREST TO MINI-HIGH PLATFORM ROW FENCE

AS IS PRACTICABLE 68'-0"
OF TRACK VARIES) (TYP)
MP36PH

69'-0"
F125

ROTEM & BOMBARDIER CARS

A. CARLOS 05/21/08 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3003
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 05/18/20 REVISED NOTES, OMITTED CPUC RAMP, PLAN AND DETAILS AC JMM THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED 1" = 30'
C 05/31/17 REVISED NOTES (NOTE 8 OMITTED) AC LA WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF METROLINK STATION STANDARDS REVISION SHEET
B 10/04/16 ADDED CPUC RAMP AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CENTER PLATFORMS D 1 OF 1
A 01/10/13 REVISED MINI-HIGH CONFIGURATION AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3003
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:44 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_3\ES3003.dgn
 60'-0"

25'-0" 35'-0" 50'-0" 35'-0"

MINI-HIGH PLATFORM
NOTES:
1. FOR ADDITIONAL PLATFORM INFORMATION SEE SCRRA STANDARD DRAWINGS
DIRECTIONAL BAR TILE ES3002 AND ES3003.
SEE NOTE 2 2. DIRECTIONAL BAR TILE PLACEMENT SHALL GENERALLY ALIGN WITH ROLLING
END OF PLATFORM

STOCK DOORS.

BLACK & WHITE DETECTABLE

TO LOS ANGELES WARNING TILES, SEE ES3103 AWAY FROM LOS ANGELES
FOR DETAILS PARTIAL PLAN @ TYPICAL SIDE PLATFORM

85'-0" 85'-0" 58'-0"

23'-6 1/2 "

GM F59PH LOCOMOTIVE & BOMBARDIER CAR

85'-0" 85'-0" 68'-0"

23'-5" 35'-4"

PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL
PULL FOR
FOR PULL FOR
PULL FOR PULL FOR PULL FOR PULL
PULL FOR
FOR PULL FOR
PULL FOR PULL
PULL FOR
FOR PULL FOR
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW

PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW

PULL FOR PULL FOR PULL FOR PULL FOR PULL

PULL FOR
FOR PULL FOR
PULL FOR PULL
PULL FOR
FOR PULL FOR
PULL FOR
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW

MP36PH LOCOMOTIVE & ROTEM CARS

85'-0" 85'-0" 69'-0"

23'-5" 35'-4"

PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL
PULL FOR
FOR PULL FOR
PULL FOR PULL FOR PULL FOR PULL
PULL FOR
FOR PULL FOR
PULL FOR PULL
PULL FOR
FOR PULL FOR
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW

PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR PULL FOR
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW

PULL FOR PULL FOR PULL FOR PULL FOR PULL

PULL FOR
FOR PULL FOR
PULL FOR PULL
PULL FOR
FOR PULL FOR
PULL FOR
EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW EMERGNCY WINDOW
EMERGNCY WINDOW

F125 LOCOMOTIVE & ROTEM CARS

A. CARLOS 05/05/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3004
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
1
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED 8" = 1'-0"
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05/19/20 ADDED F125 LOCOMOTIVE, DIRECTIONAL TILES AND NOTE 3 AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY LOCOMOTIVE AND CAR ELEVATIONS B 1 OF 1
A 01/09/13 REVISED PARTIAL PLAN AT PLATFORM AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3004
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:45:47 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_4\ES3004.dgn
 L
HANDRAI
OF
5'-0" 5'-0"
NOTES:
PLATFORM

END
1. MINI-HIGH PLATFORM DESIGN, MATERIAL,
FABRICATION AND INSTALLATION SHALL

-0"
PROVIDE GRAFFITI COATING AT BE PER SCRRA SPECIFICATIONS.
VERTICAL SURFACES OF

-5"
3'
A

N)
MINI-HIGH RAMP 2. TUBULAR BOLLARDS SHALL BE 3" DIAMETER

(MI
HANDRAIL

5'
"TUFF POST" WITH BLACK CAP BY IMPACT
MODIFIED SIGN RECOVERY SYSTEMS OR EQUAL WITH FIXED
CJ (TYP.) BASE AND YELLOW IN COLOR WITH TWO
TYPE R5-1
PER NOTE 3 ORANGE REFLECTIVE BANDS 42" HIGH.

-0"
YELLOW STRIPE RAMP DN 3. THE MODIFIED TYPE R5-1, "DO NOT ENTER"

-0"

N)
6'
SEE ES3203-01 SLOPE 1:16 18" x 18" SIGN SHALL BE INSTALLED
3'x4'

(MI
19'
ON POST PER ES5210 WITH THE TOP
DIRECTIONAL
1" WIDE BLACK CONTRAST OF SIGN 4'-0" FROM PLATFORM LEVE.
9" BAR TILES
STRIPE SEE ES3203-01

-0"
4. MINI-HIGH SHALL COMPLY WITH THE LATEST
YELLOW DETECTABLE
ADA REGULATIONS.

2'
WARNING TILES (TYP.)

-7"
SEE ES3203-01

7'
-7"
2' LEGEND:
-6"

-11"
TRACK

BLACK DETECTABLE WARNING TILE

8'

C MINI-HIGH
-4"
7'

PLATFORM 2
5'

- WHITE DETECTABLE WARNING TILE

C OF

YELLOW DETECTABLE
2' x 3' BLACK/WHITE DIRECTIONAL BAR TILE
WARNING TILES
DETECTABLE WARNING TILES
(SEE LEGEND)

MINI-HIGH PLATFORM PLAN

SCALE: ¼" = 1'-0"
TUBULAR BOLLARDS
(TYP)
SEE NOTE 2

8'-11" HANDRAIL

8'-6" 4'-8¾"
TYPE 16 SIGN
MIN. TYPE 16 SIGN SEE ES3323
SEE ES3323 HANDRAIL RAMP FOR DETAILS
C TRACK LINE OF CPUC FOR DETAILS
CLEARANCE ENVELOPE
½" BEAD OF SILICON
OR POLYURETHANE
MODIFIED SIGN TYPE TUBULAR BOLLARDS CAULK AT BASE OF
DO NOT 1½" DIA. STAINLESS
R5-1 PER NOTE 3 (TYP) POLE
STEEL HANDRAIL
SEE NOTE 2

-0"
ENTER NON-SHRINK GROUT
CONC.

3'
2½" DIA. CORE
-0"

-7"
4"
4'

7'
5'-4" 2'-7"

12ƒ "
7"
-1"

-4"
1'

RAMP DN

3'
8"

TOP OF RAIL
2½"

OF RAMP
EDGE OF PLATFORM

1 MODIFIED SIGN
TYPE R5-1 12ƒ"
-
PER NOTE 3

END
SECTION A DETAIL 1 DETAIL 2
SCALE: ¾" = 1'-0" - SCALE: 3" = 1'-0" - SCALE: ½" = 1'-0" -

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3101
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 05-22-20 ADD DIRECTIONAL BARS, MIRROR BOLLARDS, ADD DETAIL 2 AC JMM THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED AS NOTED
C 10-07-16 REVISED NOTES, "TILES" TO "PANELS" AC NDP WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 08-05-13 REVISED NOTES ON PLATFORM PLAN AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MINI - HIGH PLATFORM DETAILS D 1 OF 2
A 09-10-12 REVISED PLAN ADDED SECTION A AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3101-01
UserName=> scrrapw01app02$ Date Plotted: 1/13/2021 4:13:40 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\65\489_5\ES3101-01.dgn
 50'-8"

17'-4" 16'-0" 17'-4"

NOTE: 8'-0"

RAMP LENGTH WILL VARY DEPENDANT ON

LONGITUDINAL SLOPE OF PLATFORM. RAMP

-0"
LENGTH OF 17'-4" SHOWN IS BASED ON

6'
LONGITUDINAL PLATFORM SLOPE OF 0%. RAMP SLOPE 1 : 16 RAMP SLOPE 1 : 16

-0"
11'

-0"
5'
LIMIT FOR TYPE 2 TYPE 1
SIDE PLATFORM (DOUBLE RAMP)
HANDRAIL

33'-4"

17'-4" 16'-0"

8'-0"

-0"
RAMP SLOPE 1 : 16

6'
TYPE 1 - REAR VIEW

-0"
TYPE 2 - REAR VIEW

11'

-0"
5'
LIMIT FOR TYPE 2

HANDRAIL
TYPE 2
SIDE PLATFORM (SINGLE RAMP)
(TYP. OPP.)
-0"
3'

(TY P.OPP.)
-0"
-1"

5'
1'

17'-4" 16'-0" 17'-4"

ES
V ARI
RAMP SLOPE 1 : 16 RAMP SLOPE 1 : 16

TYPE 1 - FRONT VIEW

TYPE 2 - FRONT VIEW
TYPE 3 - FRONT/REAR VIEW

TYPE 3
CENTER PLATFORM

MINI-HIGH PLATFORM SCHEDULES

A. CARLOS 04/16/01 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3101
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-22-20 ADD DIRECTIONAL BARS AND NOTE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MINI - HIGH PLATFORM DETAILS B 2 OF 2
A 06-29-12 REMOVE SECTIONS AND ADDED PLANS & ELEVATIONS AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3101-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:45:48 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_6\ES3101-02.dgn
 NOTES: 17'-4" 16'-0" 17'-4"

1. PRECAST MINI-HIGH PLATFORM DESIGN, MATERIAL, FABRICATION

AND INSTALLATION SHALL BE AS PER SCRRA SPECIFICATIONS. 3'-4" x 6'-0" STEEL

-0"
2. RAMP LENGTH WILL VARY DEPENDANT ON LONGITUDINAL SLOPE CHECKERED PLATE WITH
OF PLATFORM. RAMP LENGTH OF 17'-4" SHOWN IS BASED ON NON-SLIP FINISH (TYP.)

5'
LONGITUDINAL PLATFORM SLOPE OF 0%.

-0"
3. MINI-HIGH SHALL COMPLY WITH THE LATEST ADA REGULATIONS.

11'
OF TRACK
C

-0"
6'
RAMP SLOPE 1 : 16 RAMP SLOPE 1 : 16

-4"
EDGE OF YELLOW STRIPE YELLOW DETECTABLE 2' x 3' BLACK/WHITE TUBULAR BOLLARDS

-11"

5'
PLATFORM

-6"
SEE ES3203-01 WARNING TILE (TYP) DETECTABLE WARNING AND SIGNAGE (TYP) SEE
SEE ES3203-01 TILES SEE LEGEND DETAIL 2 ON ES3101-01

7'

8'

-11"
-7"
6'-0" 4'-0" 6'-0"

12'
2'
-7"

TYPE 1
7'

1" WIDE BLACK

CONTRAST STRIPE 17'-4" 16'-0"
SEE ES3203-01
-0"

-0"
19'

-0"
RAMP DN RAMP DN
6'

METAL

5'
HANDRAIL
RAMP SLOPE 1 : 16 RAMP SLOPE 1 : 16

-0"
11'
-5"

-0"
5'-0" 3'-4" 7'-0" 7'-0" 6'-0" 4'-0" 6'-0" 7'-0" 7'-0" 3'-4" 5'-0"
-0"

6'
5'

RAMP SLOPE 1 : 16
3'

6'-0" x 11'-0" PRECAST

6'-0" x 7'-0" PRECAST CONCRETE RAMP UNITS 6'-0" 4'-0" 6'-0"
CONCRETE RAMP UNITS
4'-0" x 11'-0" PRECAST REINFORCED
CONCRETE PLATFORM UNIT
6'-0" x 11'-0" PRECAST TYPE 2
CONCRETE RAMP UNITS

17'-4" 16'-0" 17'-4"

PRECAST MINI-HIGH PLATFORM PLAN

LIMIT FOR TYPE 2

-0"
5'
-0"
11'

-0"
6'
3'-10" 7'-0" 7'-0" 8'-0" 8'-0" 7'-0" 7'-0" 3'-10"

ES
TYPE 1 - REAR VIEW

VARI
TYPE 2 - REAR VIEW RAMP SLOPE 1 : 16 RAMP SLOPE 1 : 16

LIMIT FOR TYPE 2

-0"
6'
-1"

-0"
1'

11'

-0"
5'
17'-10" 6'-0" 4'-0" 6'-0" 17'-10"

TYPE 1 - FRONT VIEW TYPE 3

TYPE 2 - FRONT VIEW
MINI-HIGH PLATFORM SCHEDULES
TYPE 3 - FRONT/REAR VIEW

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3102
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
D 05-22-20 ADD DIRECTIONAL BARS, SAFETY SIGN POINTS, RENUMBER DGN AC JMM 1
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED 4" = 1'-0"
C 10-07-16 REVISED NOTE, "TILE" TO "PANEL" AC NDP WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 08-05-13 REVISED CONTRAST STRIPE AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PRECAST MINI - HIGH PLATFORM D 1 OF 2
A 06-29-12 REVISE DRAWING SCALE, MINI-HIGH PLATFORM HEIGHT AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3102-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:45:44 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_7\ES3102-01.dgn
 ?" HOLES FOR ?" DIA. x 10"
2" x 2" x ?" x 3'-0" THREADED ROD
BELOW STEEL PLATES
DETECTABLE WARNING TILE
2½" x 7½" x ½" PLATE
FOR ADDITIONAL
DETAILS SEE ES3203
MINI-HIGH SIDE OF MINI-HIGH

1¼ "
PLATFORM EDGE
-0"

TOP OF MINI-HIGH

½ " MAX.
6'

2½ "
PLATFORM

½ "
6"

1¼ "
-0"

-2"
2" 1¾"1¾" 2"
5'

1'
L 3" x 3" x ?" x 2'-0"
7½"
TYPICAL

L 3" x 3" x ?" x 2'-0" A

TYPICAL - 6"
L3" x 3" x ?" x 2'-0" BASE PLATE FOR SINGLE POST
W/ (2) ¾" DIA. x 4"
ANCHOR BOLTS
PRECAST RAMP ANCHOR ANGLE PLACEMENT
DETAIL 1
-
SCALE: NTS
SECTION A
-
SCALE: NTS

C OF TRACK
8'-6"
10½"

1 ½" DIA. O.D. STAINLESS

STEEL HANDRAIL

-4"
6" 1'-0"
1 ½" DIA. O.D. STAINLESS 2" R.

1'
STEEL HANDRAIL
-4"
1'

WELDED GROUND
-0" TYP.

SMOOTH (TYP.)
-4"

-4"
DETECTABLE WARNING TILE

-0"
1'

FOR ADDITIONAL

1'
2"R

1'
3'

DETAILS SEE ES3203

-4"

2" R.
1'

TOP OF
MINI-HIGH TOP OF MINI-HIGH
PLATFORM

4"
PLATFORM
-4"
4"

1'

-0"
3'-4" x 6'-0" STEEL

-1"
CHECKERED PLATE RAMP DN

1'
2'
WITH NON-SLIP FINISH

TOP OF PLATFORM
4"

TOP OF
4"

PLATFORM TOP OF
3'-4" x 6'-0" STEEL
PLATFORM
CHECKERED PLATE 7'-11"
5'-0"
WITH NON-SLIP FINISH

A TYP. 12'-11"
-
CLR LANDING SLOPE RAMP LEVEL FLOOR

TYPICAL HANDRAIL 1 TYPICAL HANDRAIL 2

A. CARLOS 02/21/07 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3102
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 05-22-20 REVISE NOTES, DETAILS, RENUMBER DGN AC JMM THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NONE
C 10-07-16 REVISE NOTES AC NDP WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF PRECAST MINI - HIGH PLATFORM REVISION SHEET
B 08-05-13 REVISE DETAIL NOTES AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY DETAILS D 2 OF 2
A 06-29-12 REVISE PRECAST PLAN & TYPICAL HANDRAIL 2 AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3102-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:06 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_8\ES3102-02.dgn
 NOTES:
1. LIGHT POLE AND CANOPY SHOWN AS REFERENCE ONLY
ACTUAL DESIGN TO BE DETERMINED BY THE ARCHITECT.
2. STATION FURNITURE (BENCHES, TRASH RECEPTACLES)
SHALL BE PLACED AT THE BACK OF THE PLATFORM.
3. LED MESSAGE SIGN MOUNTED ON CANOPIES SHALL NOT
BE WITHIN 12'-0" OF THE TRACK CENTERLINE.

LIGHT POLE

CANOPY
SEE NOTE 1

LED MESSAGE SIGN,

SEE NOTE 3

C TRACK C FENCE
12'-0" 9'-9"
(MIN. CLEAR)

MAINTAIN 44" MIN. WALKWAY

DETECTABLE WARNING
INTERTRACK FENCE

N.
TILE PER ES3203

MI
5'-4" 9'-6"
(MIN. CLEAR)

PE
EXTEND PLATFORM, AS SPACE ALLOWS

STRI

-0"
AT CANOPIES AS NEEDED TO ACCOMODATE

6'
SEATING AND PEDESTRIAN TRAFFIC

YELLOW
1% SLOPE

8"
TOP OF RAIL

LANDSCAPING
3%

MIN. 6" THICK CAST IN PLACE

CAST-IN-PLACE PLATFORM EDGE
CONCRETE SLAB FOUNDATION

16'-0" SEE SCRRA ENGINEERING

6" THICK STANDARD ES5101 FOR
(MIN.)
HOT MIX ASPHALT FOOTING DETAILS

SIDE PLATFORM UNDER-DRAIN

PER ES2004

A. CARLOS 05/24/07 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3201
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIDE PLATFORMS REVISION SHEET
B 05-22-20 REVISE DETAIL, ADD NOTE 3 AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TYPICAL SECTIONS B 1 OF 1
A 10-07-16 REVISED WARNING PANEL NOTE AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3201
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:45:48 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_9\ES3201.dgn
 NOTES:
1. LIGHT POLE AND CANOPY SHOWN AS REFERENCED ONLY.
ACTUAL DESIGN TO BE DETERMINED BY THE ARCHITECT.
2. STATION FURNITURE (BENCHES, TRASH RECEPTACLES)
SHALL BE PLACED AT THE CENTER OF THE PLATFORM.
3. LED MESSAGE SIGN MOUNTED ON CANOPIES SHALL NOT
BE WITHIN 12'-0" OF THE TRACK CENTERLINE.

LIGHT POLE

CANOPY
SEE NOTE 1
12'-0"

MIN.

LED MESSAGE SIGN,

SEE NOTE 3

MAINTAIN 44" MIN. WALKWAY

N.
-0"
C TRACK C TRACK

MI
(TYP, OPP)

9'
DETECTABLE
WARNING TILE
PER ES3203

PE
MIN. 6" THICK

STRI
CAST-IN-PLACE 5'-4"
CONCRETE SLAB

YELLOW
1% SLOPE 1% SLOPE

8"
TOP OF RAIL

CAST-IN-PLACE PLATFORM
EDGE FOUNDATION

C OF PLATFORM 6" THICK

15'-0" HOT MIX ASPHALT
(TYP)

30'-0"
PLATFORM

CENTER PLATFORM

A. CARLOS 05/24/07 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3202
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-22-20 REVISED DETAIL, ADDED NOTE 3 AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS

B 10-07-16 REVISED WARNING PANEL NOTE AC NDP

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF CENTER PLATFORMS REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TYPICAL SECTIONS C 1 OF 1
A 9-21-12 REVISED DETECTABLE WARNING REFERENCE NUMBER AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3202
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:06 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_10\ES3202.dgn
 C OF TRACK C OF TRACK NOTE:
4" 8'-6" 8'-6" SEE SCRRA STANDARD DRAWING ES3203-02
1 FOR ADDITIONAL INFORMATION AND DETAILS
1'-2" 2'-0" 5'-4" 3'-0" 4 2" 1'-2" 2'-0" 5'-4"
TYP

PLEASE W AIT BEH IN D YELLO W LIN E

PLEASE W AIT BEH IN D YELLO W LIN E

4" OR 4 2" 1'-2" 2'-0"

1" WIDE DETECTABLE WARNING

YELLOW STRIPE CONTRAST TILE PANEL END

-0"

-0"
-0"
STRIPE

TY P
DETECTABLE

4'

4'
4'
WARNING TILE
AT PLATFORM
EDGE

CONCRETE SLAB

DIRECTIONAL BAR TILE DIRECTIONAL BAR TILE

TO BE LOCATED TO BE LOCATED
PER ES3004 PER ES3004

4½" WIDE
YELLOW STRIPE

4" WIDE
YELLOW DETECTABLE WARNING
YELLOW STRIPE
SECTION A
TILE PANEL, DOME ORIENTATION
SCALE: ½" = 1'-0"
SHALL BE STAGGERED PER DETAIL
ON ES3203-02

EDGE OF PLATFORM
EDGE OF PLATFORM

YELLOW DETECTABLE WARNING

TILE PANEL, DOME ORIENTATION
SHALL BE STAGGERED PER DETAIL
ON ES3203-02

A A

1" WIDE BLACK 1" WIDE BLACK

4" HIGH BLOCK LETTERS, 4" HIGH BLOCK LETTERS,
CONTRAST STRIPE CONTRAST STRIPE
PER ES1212 PER ES1212
COLOR: BLACK COLOR: BLACK
(NOTE: IF PLATFORM SURFACE IS SPACING: 30 FT. ON CENTER
DARK, A CONTRASTING COLOR (BLOCK LETTERS PAINTED
(WHITE OR YELLOW) SHOULD BE OVER 4½" WIDE YELLOW
USED) STRIPE)
SPACING: 30 FT. ON CENTER

STANDARD DETAIL ALTERNATE DETAIL

FOR JOINT AMTRAK - METROLINK
STATIONS WITH SCRRA APPROVAL

A. CARLOS 04/16/01 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3203
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 05-22-20 ADD DIRECTIONAL BARS, REVISE NOTES AC JMM THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED 1" = 1'-0"
C 10-07-16 ADD ALTERNATE STRIPING, DETAILS MOVED TO SHEET 02 AC NDP
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES DETECTABLE WARNING TILE, REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 07-24-13 ADD ALTERNATE STRIPING, DETAILS MOVED TO SHEET 02 AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY DIRECTIONAL BAR TILE, D 1 OF 2
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 05-31-13 REVISED CONTRAST STRIPE AC NDP
AND MARKING DETAILS CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3203-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:09 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_11\ES3203-01.dgn
 1'-0"

2.35" CENTER TO
1.67"

3"
CENTER SPACING
(APPROX.)

11.28" .72"

RAISED, TRUNCATED DOMES

DIRECTIONAL BAR IN A STAGGERED PATTERN
TILE PATTERN SCALE: NONE
SCALE: 3" = 1'-0"
NOTE: STAGGERED PATTERN COMPLIES
TO BE INSTALLED PER WITH FTA ADA CIRCULAR C4710.0 - 3.2.5 C
MANUFACTURER'S RECOMMENDATION

0.20"
1.28" 0.45"

.191"
.188"

.77" TOP DIA

0.9"
BASE DIA
3"

DIRECTIONAL BAR RAISED

TILE ELEVATION TRUNCATED DOME
SCALE: FULL SCALE: NONE

SEALANT WITH
½" DETECTABLE SEALANT WITH ¼" DETECTABLE DETECTABLE
?" EXPANSION JOINT BACKER ROD
WARNING TILE BACKER ROD WARNING TILE WARNING TILE

? "
DETECTABLE
? "

? "

? "
EXPANSION JOINT
WARNING TILE
FILLER

CONCRETE EDGE OF
SLAB PLATFORM

CONCRETE CONCRETE CONCRETE CONCRETE

PLATFORM PLATFORM PLATFORM PLATFORM

DETECTABLE WARNING DETECTABLE WARNING TILE DETECTABLE WARNING DETECTABLE WARNING TILE
TILE JOINTS AT EXPANSION JOINTS TILE END AT PLATFORM EDGE
SCALE: 3" = 1'-0" SCALE: 3" = 1'-0" SCALE: 3" = 1'-0" SCALE: 3" = 1'-0"

A. CARLOS 07/24/13 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3203
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED AS NOTED
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES DETECTABLE WARNING TILE, REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-22-20 REVISED DETAILS AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY DIRECTIONAL BAR TILE, B 2 OF 2
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 10-07-16 REVISED DETAIL LABELS AC NDP
AND MARKING DETAILS CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3203-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:24 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_12\ES3203-02.dgn
 GENERAL SIGNAGE NOTES SHEET INDEX

1. ALL TYPESETTING SHALL BE PROVIDED BY SIGN CONTRACTOR. PAGE DESCRIPTION

LETTER SPACING TO BE "NORMAL" SPACING FOR ALL SIGNS EXCEPT AS SPECIFIED
OTHERWISE. SIGN CONTRACTOR SHALL PROVIDE SCRRA WITH TYPICAL SPACING ES3301-01 WAYFINDING NOTES AND SHEET INDEX
PATTERNS FOR APPROVAL PRIOR TO FABRICATION. ES3301-02 GRAPHIC STANDARDS
ES3302-01 STATION SIGN MENU
2. ALL INSTALLATION LOCATIONS AND CONDITIONS SHALL BE FIELD VERIFIED PRIOR ES3302-02 STATION SIGN MENU
TO FABRICATION.

3. ALL SIGNS SHALL BE INSTALLED AS PER EXISTING/CURRENT CODE REQUIREMENTS

FOR SAFE AND SECURE MOUNTING. LOCATION PLANS
ES3303-01 STATION SITE - TYPICAL SIGN LOCATION PLAN
4. SIGN CONTRACTOR SHALL COORDINATE ALL SIGN INSTALLATIONS WITH SCRRA.
ES3303-02 SIDE PLATFORM - TYPICAL SIGN LOCATION PLAN
ES3303-03 CENTER PLATFORM - TYPICAL SIGN LOCATION PLAN
5. SIGN CONTRACTOR SHALL REFER TO SPECIFICATIONS FOR ALL MATERIAL DETAILS
AND SPECIFIC INSTRUCTIONS.

6. SIGN CONTRACTOR SHALL PROVIDE ALL ENGINEERING OF SIGN AND GRAPHIC ITEMS
INCLUDING, BUT NOT LIMITED TO, INTERNAL STRUCTURE, ELECTRICAL AND MECHANICAL DESIGN DRAWINGS
PARTS, CONCRETE FOOTINGS AND APPLICABLE CODES AND REGULATIONS. SHOP
DRAWINGS SHALL CARRY THE ENGINEERS STAMP AND BE SIGNED BY A CALIFORNIA ES3305 SIGN TYPE 1: PRIMARY IDENTIFICATION MONUMENT SIGN
REGISTERED CIVIL ENGINEER. ES3306 SIGN TYPE 2: VEHICULAR DIRECTIONAL FREESTANDING SIGN
ES3307-01 SIGN TYPE 3: INFORMATION/RESTRICTIVE SIGN LAYOUTS
7. SIGN CONTRACTOR TO PROVIDE SHOP DRAWINGS FOR ALL SIGNS. ES3307-02 SIGN TYPE 3: INFORMATION/RESTRICTIVE SIGN DETAILS
ALL ATTACHMENT DETAILS SHALL BE SHOWN ON SHOP DRAWINGS AND DRAWINGS ES3307-03 SIGN TYPE 3: INFORMATION/RESTRICTIVE EXIT SIGN INSTALLATION DETAILS
SHALL BE SUBMITTED TO SCRRA FOR APPROVAL PRIOR TO FABRICATION. ES3308 SIGN TYPE 4: TRAILBLAZER DIRECTIONAL SIGN
ES3309 SIGN TYPE 5: PARKING RESTRICTIVE SIGN POLE MOUNTED
8. ALL EXPOSED SIGN SURFACES, ATTACHMENTS, EDGES AND SEAMS SHALL BE PAINTED ES3310 SIGN TYPE 6: ACCESSIBLE PARKING IDENTIFICATION SIGN
OR PORCELAINIZED AS NOTED TO PREVENT RUST. ES3311 SIGN TYPE 7: ACCESSIBLE PARKING INFORMATION SIGN
ES3314 SIGN TYPE 8: TRACK DIRECTIONAL SIGN
9. NO SIGN SHALL BE INSTALLED WITHIN THE PUBLIC UTILITIES COMMISSION CLEARANCE ES3315 SIGN TYPE 9: ELEVATOR DIRECTIONAL SIGN
ENVELOPE. POST, POLES AND SINGS MUST HAVE A MINIMUM CLEARANCE OF 8'-6" TO ES3316 SIGN TYPE 10: ELEVATOR IDENTIFICATION SIGN FLAG MOUNTED
CENTER OF TANGENT TRACK. ES3317 SIGN TYPE 11: PEDESTRIAN WARNING SIGNS AT STATION PLATFORMS
ES3318 SIGN TYPE 12: PEDESTRIAN DIRECTIONAL SIGN GATE MOUNTED
ES3319 SIGN TYPE 13: PEDESTRIAN DIRECTIONAL LOOK SIGN POST MOUNTED
ES3320-01 SIGN TYPE 14: STATION IDENTIFICATION SIGN
ES3320-02 SIGN TYPE 14: STATION IDENTIFICATION SIGN AT TRACK
LEGEND: ES3322 SIGN TYPE 15: CPUC RAILROAD CROSSING SIGN POST MOUNTED
ES3323 SIGN TYPE 16: ACCESSIBILITY SIGN
ES3324-01 SIGN TYPE 17: PEDESTRIAN RESTRICTIVE/INFORMATION SIGN
XX-X THE FIRST NUMBER DENOTES THE SIGN TYPE. ES3324-02 SIGN TYPE 17: PEDESTRIAN RESTRICTIVE/INFORMATION SIGN
THE SECOND NUMBER DENOTES THE SPECIFIC ES3325 SIGN TYPE 18: ADA STATION IDENTIFICATION SIGN (BRAILLE)
SIGN OF THAT SIGN TYPE. FOR DETAILS, SEE ES3326 SIGN TYPE 19: MAP/INFO KIOSK FREESTANDING
APPROPRIATE STANDARD FOR LISTED SIGN TYPE. ES3328 SIGN TYPE 20: DISPLAY CASE WALL OR POST MOUNTED
ES3330-01 SIGN TYPE 21: TRAIN POSITION MARKER
ES3330-02 SIGN TYPE 21: TRAIN POSITION MARKER
ES3330-03 SIGN TYPE 21: SIDE PLATFORM - SINGLE, TYPICAL MARKER LOCATION PLAN
ES3330-04 SIGN TYPE 21: SIDE PLATFORM - DUAL, TYPICAL MARKER LOCATION PLAN
ES3330-05 SIGN TYPE 21: SIDE PLATFORM - BI-DIRECTIONAL SERVICE, TYPICAL MARKER LOCATION PLAN
ES3330-06 SIGN TYPE 21: CENTER PLATFORM, TYPICAL MARKER LOCATION PLAN
ES3332 SIGN TYPE 22: PASSENGER INFORMATION TELEPHONE
ES3340 SIGN MOUNTING DETAILS

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3301
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-22-20 REVISE GENERAL NOTES AND SHEET INDEX AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY WAYFINDING NOTES AND SHEET INDEX B 1 OF 2
A 03-22-13 REVISE SHEET INDEX AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3301-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:09 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_13\ES3301-01.dgn
 SIGNAGE COLORS METROLINK LOGO

PRIMARY SECONDARY WARNING & TRACKS NOTE: DIGITAL FILES OF METROLINK LOGOTYPE TO BE PROVIDED BY SCRRA

BLACK SEA GREEN ACCESS BLUE GREEN

PMS BLACK 6C PMS 318C PMS 801C PMS 355C
BACKGROUND: WHITE

FONT COLOR: WHITE

WHITE ORANGE RED BLUE COLOR: BLACK

11-0601 TCX PMS 1665C PMS 193C PMS 542C
BRIGHT WHITE
COLOR: GRAY

TEAL YELLOW
PMS 323C PMS 116C COLOR: GRAY

COLOR: TEAL

GRAY
PMS COOL GRAY 10C

SIGNAGE SYMBOLS SIGNAGE TYPOGRAPHY

BERTOLD AKZIDENZ GROTESK SUPER

ABCDEFGHIJKLMNOPQRSTUVWXYZ
1. ARROW 2. RAIL
CROSSING
3. DO NOT
ENTER
4. NO PARKING 5. NO SMOKING 6. TRAIN
abcdefghijklmnopqrstuvwxyz
0123456789

BERTOLD AKZIDENZ GROTESK MEDIUM

7. PARKING 8. ACCESSIBILITY 9. TELEPHONE 10. RESTROOMS 11. BUS 12. TAXI

ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
13. BICYCLE 14. MOTORCYCLE 15. DO NOT CROSS 16. ELEVATOR 17. ELEVATOR
PARKING PARKING TRACKS TYPE I TYPE II

18. INFORMATION

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3301
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 08-28-20 REVISED LOGO AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY GRAPHIC STANDARDS B 2 OF 2
A 03-20-17 REVISED LOGO AND COLORS AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3301-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:27 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_14\ES3301-02.dgn
 NOTES:
1. THE TYPICAL SIGNAGE TYPES USED AT A
STATION ARE SHOWN IN THIS STANDARD
2. FOR TYPICAL SIGN LOCATION PLACEMENT
AT STATIONS AND PLATFORMS SEE ES3303.

SIGN TYPE 1 SIGN TYPE 2 SIGN TYPE 3 SIGN TYPE 4 SIGN TYPE 5
PRIMARY IDENTIFICATION SIGN- VEHICULAR DIRECTIONAL SIGN - INFORMATION/RESTRICTIVE SIGN TRAILBLAZER DIRECTIONAL SIGN PARKING RESTRICTIVE SIGN -
MONUMENT FREESTANDING POLE MOUNTED

SIGN TYPE 6 SIGN TYPE 7 SIGN TYPE 8 SIGN TYPE 9 SIGN TYPE 10 SIGN TYPE 11
ACCESSIBLE PARKING ACCESSIBLE PARKING TRACK DIRECTIONAL SIGN ELEVATOR DIRECTIONAL SIGN ELEVATOR IDENTIFICATION SIGN - PEDESTRIAN WARNING SIGN
IDENTIFICATION SIGN INFORMATION SIGN FLAG MOUNTED

SIGN TYPE 12 SIGN TYPE 13 SIGN TYPE 14 SIGN TYPE 15 SIGN TYPE 16
PEDESTRIAN DIRECTIONAL SIGN PEDESTRIAN DIRECTIONAL LOOK SIGN - STATION IDENTIFICATION SIGN - SMALL CPUC RAILROAD CROSSING SIGN ACCESSIBLE SIGN
POLE MOUNTED POLE MOUNTED POLE MOUNTED

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3302
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY STATION SIGN MENU A 1 OF 2
A 05-22-20 ADDED SIGN TYPES, REVISED SIGN NUMBERS AND NOTES AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3302-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:19 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_15\ES3302-01.dgn
 SIGN TYPE 17 SIGN TYPE 18 SIGN TYPE 19 SIGN TYPE 20
PEDESTRIAN RESTRICTIVE/ A.D.A. STATION MAP/INFO KIOSK DISPLAY CASE
INFORMATION SIGN IDENTIFICATION SIGN FREESTANDING

SIGN TYPE 21 SIGN TYPE 21 SIGN TYPE 22

POSITION MARKER & LOCOMOTIVE POSITION MARKER PASSENGER INFORMATION TELEPHONE
TRACK IDENTIFICATION SIGN

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3302
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY STATION SIGN MENU A 2 OF 2
A 05-22-20 REVISED SING TYPE NUMBERS AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3302-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:26 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_16\ES3302-02.dgn
 TRACK

PLATFORM
ACCESSIBLE PARKING
7-1 RESTRICTIVE SIGN
MAP 19-1
5-1 METROLINK PARKING
INFORMATION
NO PARKING RESTRICTIVE SIGN
KIOSK
3-6 LOADING ZONE
ACCESSIBLE 6-1 SIGN
PARKING
SIGNS
BUS STOP

METROLINK VEHICLE
ONLY SIGN 5-2 PRIMARY
SEE NOTE 2 ENTRANCE

1-1 SITE IDENTIFICATION

MONUMENT SIGN

ET
COMMUNICATION

RE
HOUSE

ST
PARKING LOT

VEHICULAR
2-1 DIRECTIONAL
SIGN

NOTES:
1. THIS STANDARD REPRESENTS TYPICAL SIGNAGE LOCATION
PLACEMENT AT A METROLINK STATION AND IS SHOWN FOR
REFERENCE ONLY. ACTUAL STATIONS AND SIGN
REQUIREMENTS MAY VARY FROM THIS STANDARD.

2. METROLINK ONLY VEHICLE STALL SHALL BE LOCATED AS

CLOSE TO THE COMMUNICATION HOUSE AS POSSIBLE
WITHOUT IMPACTING ANY REQUIRED ACCESSIBLE PARKING
STALLS. DISCUSS WITH SCRRA IF ADDITIONAL METROLINK
ONLY VEHICLE STALLS ARE REQUIRED FOR THE STATION.

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3303
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF STATION SITE REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TYPICAL SIGN LOCATION PLAN A 1 OF 3
A 08-20-20 REVISED SIGN NUMBERS AND NOTES AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3303-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:27 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_17\ES3303-01.dgn
 NOTE:
THIS STANDARD REPRESENTS TYPICAL SIGNAGE LOCATION
PLACEMENT ON A METROLINK STATION SIDE PLATFORM
AND IS SHOWN FOR REFERENCE ONLY. ACTUAL PLATFORM
AND SIGN TYPE REQUIREMENTS MAY VARY FROM THIS PLAN.

ADA STATION
IDENTIFICATION
SIGN

18-1

17-1

14-1 3-1 14-1 14-1

EN T R AN C E
STATION
17-1 17-4 17-1 IDENTIFICATION
ACCESSIBLE RAMP SIGN
IDENTIFICATION
14-1
17-6 SIGN
17-4

S T A T IO N
16-1
3-1 18-1
17-6

14-1

STATION
IDENTIFICATION 3-1
SIGN (TYP) PLATFORM

TRACK

FENCE

TRACK

PLATFORM

3-1 17-6

11-2 "DO NOT ENTER"

EN T R AN C E
SIGN
"CAUTION" SIGN 16-1
(TYP)
18-1

17-6 18-1

S T A T IO N
"DO NOT ENTER" 17-1
SIGN

14-1 3-1 14-1 3-1 14-1 14-1

17-4 "TRACK 17-1 17-4 17-1

IDENTIFICATION"
"NO BICYCLING" "PLEASE
SIGN
SIGN PURCHASE
TICKET"
SIGN

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3303
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIDE PLATFORM REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TYPICAL SIGN LOCATION PLAN A 2 OF 3
A 05-22-20 REVISED NUMBERING AND NOTE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3303-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:34 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_18\ES3303-02.dgn
 NOTE:
THIS STANDARD REPRESENTS TYPICAL SIGNAGE LOCATION
PLACEMENT ON A METROLINK STATION CENTER PLATFORM
AND IS SHOWN FOR REFERENCE ONLY. ACTUAL PLATFORM
AND SIGN TYPE REQUIREMENTS MAY VARY FROM THIS PLAN.

U N D ER P AS S
3-1
18-1
"TRACK
17-1

EN T R AN C E
IDENTIFICATION"
SIGN

S T A T IO N
14-1 11-2 14-1 11-2 14-1 11-2 14-1

FENCE

TRACK

18-1

16-1
17-6 "ACCESSIBLE 17-6
RAMP
IDENTIFICATION"
PLATFORM SIGN

TRACK

FENCE

14-1 14-1 14-1 14-1

3-1 3-1
17-1 17-4 17-1 17-4

"STATION 14-1 14-1

IDENTIFICATION"
"STATION 11-2 11-2 11-2
SIGN
IDENTIFICATION" "CAUTION"
SIGN (TYP) SIGN

14-1 14-1

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3303
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF CENTER PLATFORM REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TYPICAL SIGN LOCATION PLAN A 3 OF 3
A 05-29-20 REVISED PLATFORM, NUMBERING AND TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3303-03
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:24 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_19\ES3303-03.dgn
 NOTES:
1. SIGN CONTRACTOR SHALL ENGINEER FABRICATION
AND INSTALLATION OF SIGN STRUCTURE TO SATISFY
ALL LOCAL CODES & WIND LOAD FACTORS.
2. SIGN PANEL TO BE PORCELAIN ENAMEL WITH SMOOTH-
1 1
1'-0" 2" 8'-0" 2" 1'-0" FINISHED EDGES & SEAMS; MARINE GRADE PLYWOOD-
3
FILLED INTERIOR.
4" 1 4" 3. ALL FASTENERS SHALL BE PLATED FASTENERS AND
BAR COLOR: ORANGE FONT COLOR: WHITE
SHALL BE PAINTED TO MATCH SIGN FACE.
4"

FABRICATED ALUMINUM
5"

REVEAL COLOR: GRAY

City Name/ LINE COLOR: WHITE

-8"

5"

City Name Station

1'

2¼
2"
1
2

4"

2"
3
1

12345

10 2"
3"

3"
-9"

1
-0"
4'

1'

City Name/

4"
12345
1
10 2" 3'-3"
LOGO COLORS PER
ES3301-02
PANEL COLOR: TEAL

ALUMINUM POST
COLOR: WHITE

CONCRETE FOOTING TO
DEPTH AS REQUIRED

1-1

ELEVATION ELEVATION
2 LINE/DOUBLE-FACED A SIDE VIEW B 1 LINE/DOUBLE-FACED C
- - -
SCALE: 1" = 1'-0" SCALE: 1" = 1'-0" SCALE: ½" = 1'-0"

9'-1"
¾ " REVEAL

"

1'-0" DIA.
-0

DOUBLE-FACED 2-PART
1'

ALUMINUM POST
C C
PANEL
PAN STYLE PORCELAIN

POSTS
SIGN CABINET ENAMEL PANEL
TOP COLOR: TEAL
C OF
&
3"

¾ " REVEAL

INTERNAL STRUCTURE AS REQ'D. INSERT MARINE

TOP OF POST TO BE FINISHED
GRADE PLYWOOD PANELS TO PREVENT OIL-CANNING
SMOOTH AND PAINTED COLOR: WHITE

STEEL REVEAL

ELECTRICAL CONDUIT

PLAN D PLAN SECTION E

SCALE: 1" = 1'-0" - NOT TO SCALE -

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3305
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED AS NOTED
C 05-29-20 REVISED SIGN TYPE NUMBER, TITLE AC DJM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS

B 03/21/17 REVISED DETAILS A, B, C AND D AC DJM

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 1 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PRIMARY IDENTIFICATION MONUMENT SIGN C 1 OF 1
A 05/01/12 REVISED DETAIL "A" AND "D" AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3305
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:36 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_20\ES3305.dgn
 NOTES:
1. SIGN CONTRACTOR SHALL ENGINEER FABRICATION
AND INSTALLATION OF SIGN STRUCTURE TO SATISFY
ALL LOCAL CODES & WIND LOAD FACTORS.
2. SIGN PANEL TO BE PORCELAIN ENAMEL WITH SMOOTH
FINISHED EDGES & SEAMS; MARINE GRADE PLYWOOD-
FILLED INTERIOR.
3. ALL FASTENERS SHALL BE PLATED FASTENERS AND
SHALL BE PAINTED TO MATCH SIGN FACE.

3'-6"

¾ " REV EAL

5" DIA. POSTS

C C

PANEL
POSTS
SIGN CABINET
TOP COLOR: TEAL
1 1

C OF
5" 2" 3'-0" 2" 5"

&
3"
3"
3"

¾ " REVEAL
LOGO COLORS
PER ES3301-02 TOP OF POST TO BE FINISHED
SMOOTH AND PAINTED COLOR: WHITE
3"

4"
3
6
4"
1
4

PLAN C
SCALE: 1½" = 1'-0"
112"
1
-6"
2'

ARROW COLOR: ORANGE

5"
-0"

Parking 5" DIA. GRAPHIC

4'

GRAPHIC COLOR: BLACK

5"

FONT COLOR: WHITE

STEEL POST DOUBLE-FACED 2-PART
7 FABRICATED ALUMINUM 4½" (5" O.D.) PAN STYLE PORCELAIN
2 8"
REVEAL COLOR: GRAY ENAMEL PANEL

PAINTED STEEL POST

PANEL COLOR: TEAL
COLOR: WHITE

FONT COLOR: WHITE

CONCRETE FOOTING TO
DEPTH AS REQUIRED INTERNAL STRUCTURE AS REQ'D.
STEEL
REVEAL INSERT MARINE GRADE PLYWOOD
PANELS TO PREVENT OIL-CANNING.

2-1

ELEVATION DOUBLE-FACED A SIDE VIEW B PLAN SECTION D

SCALE: 1½" = 1'-0" SCALE: 1½" = 1'-0" NOT TO SCALE

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3306
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED AS NOTED
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES SIGN TYPE 2 REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISED POST DIAMETER AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY VEHICULAR DIRECTIONAL B 1 OF 1
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 03-21-17 REVISED SIGN DETAILS AC DJM
FREESTANDING SIGN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3306
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:41 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_21\ES3306.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
1'-0" SPECIFIED ON ES3301-02.
(TYPICAL) 3. FONTS, SYMBOLS, AND ARROWS SHALL BE SILKSCREENED
R = ½" OR PAINTED, UNLESS OTHERWISE NOTED.
(TYPICAL) 4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
OF PANEL 5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
C
& FONT
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
PANEL COLOR: TEAL

4"
OR STAINLESS STEEL PAINTED TO MATCH SURROUNDING

3
COLOR.

2
7. CONTINUE PAINT COLOR USED ON FRONT OF SIGNS TO

2"
SIDES. PAINT BACK OF PANEL WITH DOMINANT COLOR.

1
12" 2
1
-6"
1'

FONT COLOR: WHITE

7 2"
1

7
1" 1 8"
LOGO COLORS PER

2"
ES3301-02

1
1"

3-1

TRACK IDENTIFICATION SIGN LAYOUT - DOUBLE SIDED A

1 1 ARROW COLOR: ORANGE (TYP)

1 7 12" 4 4" 1 7 1 1
12" 3 8" 12" 3 8" 12" 1" 12"
FONT & SYMBOL

1"
1"

1"
2"

COLOR: WHITE

4"
3
2

3"
8"

3"

5"
4"
3
4

4 "14 "
8"
PANEL COLOR: RED
3

1
3
THIS SIGN ONLY

4
1 8" 1"

12" 1"

1"

3
1" 1
1"
3

1
4"

2"
12"
3

1
1

3
4"

4"
3

12" 1"
1
3-2 3-3 3-4 3-5 3-6

SIGN LAYOUTS B

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3307
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES SIGN TYPE 3 REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISED LOGO AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY INFORMATION / RESTRICTIVE B 1 OF 3
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 03-22-17 REVISED SIGNS DETAILS AC DJM
SIGN LAYOUTS CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3307-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:36 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_22\ES3307-01.dgn
 C OF LIGHT STANDARD /
POLE AND SIGN PANEL

NOTES:
1. SEE ES3307-01 FOR NOTES.

WALL
SIGN PANEL
SIGN PANEL FLAG
MOUNTED TO POLE

SIGN PANEL

C OF SIGN PANEL

MOUNT TOP EDGE OF SIGN

1" BELOW CROSS BAR

-8"

-8"
(80")

(80")
6'

6'
-0"
5'

SIGN PANEL FENCE

FLUSH MOUNT TO WALL CENTER MOUNT TO ROUND POLE CENTER MOUNT TO ROUND POLE FENCE MOUNT
(DIRECTIONAL SIGN) (TRACK IDENTIFICATION SIGN)

C OF POST
PAINTED TOP PLATE
COLOR: WHITE (TYP)
1"

NOTE:
SEE ES3307-03 FOR
SIGN PANEL ADDITIONAL DETAILS
SIGN PANEL
(TYP) FOR EXIT SIGNS.

PAINTED TOP PLATE SIGN PANEL

COLOR: WHITE (TYP)

2" SQ. PAINTED (TYP)

STEEL POST (TYP)
-8"

-8"
COLOR: WHITE
(80")

(80")
6'

6'

GHT OF

ADJACENT FENCE
2" SQ. PAINTED

MATCH HEI
STEEL POST
COLOR: WHITE
(TYP)
SEE ES3340 FOR
POST MOUNTING (TYP) SEE ES3340 FOR
POST MOUNTING (TYP)

SIDE VIEW FRONT VIEW HIGH MOUNT LOW MOUNT

CENTER MOUNT TO SQUARE POST FLAG MOUNT TO SQUARE POST

(RESTRICTIVE SIGN) (EXIT SIGN)
ELEVATIONS A
SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3307
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES SIGN TYPE 3 REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY INFORMATION / RESTRICTIVE SIGN A 2 OF 3
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 05-29-20 REVISED DRAWING TITLE AC JMM
DETAILS CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3307-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:41 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_23\ES3307-02.dgn
 EXISTING FENCE EXISTING FENCE

NOTES:
1. WHERE FENCE IS LOCATED LESS THAN 10'-2"
FROM CENTERLINE OF TRACK, INSTALL TALL
VERSION OF SIGN WITH SIGN PANEL POINTING
AWAY FROM TRACK.

2. WHERE DISTANCE FROM CENTERLINE OF TRACK

TO FENCE IS 10'-2" OR GREATER, INSTALL SHORT
MINIMUM MINIMUM VERSION OF SIGN WITH SIGN PANEL POINTING
DISTANCE DISTANCE TOWARD TRACK.
FROM FENCE FROM FENCE

POST AND POST AND

SIGN PANEL SIGN PANEL

P LA T F O R M

P LA T F O R M
OF

OF
PEDESTRIAN PEDESTRIAN
WALKWAY WALKWAY
EDG E

EDG E
C OF TRACK
C OF TRACK
8'-6" MIN.
10'-2" MIN.

PLAN PLAN

2" SQUARE PAINTED

SIGN PANEL STEEL POST
COLOR: WHITE
2" SQUARE PAINTED
STEEL POST
COLOR: WHITE

SIGN PANEL
-8"

EXISTING
6'

FENCE

EXISTING
PLATFORM PLATFORM
FENCE
EDGE EDGE
C TRACK C TRACK

8'-6" MIN. 10'-2" MIN.

ELEVATION ELEVATION

EXISTING SIGN FLAG - HIGH MOUNT A EXISTING SIGN FLAG - LOW MOUNT B
SEE NOTE 1 SEE NOTE 2

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3307
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 3 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY INFORMATION / RESTRICTIVE A 3 OF 3
A 05-29-20 REVISE DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 EXIT SIGN INSTALLATION DETAILS CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3307-03
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:51 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_25\ES3307-03.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS NOTED OTHERWISE.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
COLOR.

SIGN SIGN PANEL

PANEL

SHIM AS REQUIRED
TO MAINTAIN VERTICAL
SIGN FACE

6" x 6" WOOD POST

3'-0" EXISTING
6" x 6"
POLE
WOOD
(CONDITIONS
POST
C PANEL, ARROW & VARY)
LOGO

TY)
TH CI
LAG BOLTS (TYP)

-0"

WI
8'
10"

PANEL COLOR: TEAL

FY
(VERI
2"

LOGO COLORS PER

ES3301-02
BREAKAWAY FEATURE
-0"

8"

PER CALTRANS
5
3'

STANDARD RS3
2"

REFLECTIVE VINYL DIE CUT

LOGO COLOR: WHITE
10"

REFLECTIVE VINYL DIE CUT

ARROW COLOR: ORANGE SEE ES3440 FOR
5"

POST MOUNTING (TYP)

SIDE VIEW FRONT VIEW FRONT VIEW SIDE VIEW

4-1

CENTER MOUNT TO SQUARE POST CENTER MOUNT TO ROUND POLE

SIGN LAYOUT A ELEVATIONS B

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3308
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES

B 05-29-20 REVISE DRAWING TITLE AC JMM

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 4 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TRAILBLAZER DIRECTIONAL SIGN B 1 OF 1
A 03-23-17 REVISED COPY LAYOUT "A" AND ELEVATIONS AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3308
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:44 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_26\ES3308.dgn
 1'-5"
1'-0"
1" R = ½"
ALIGN FONT

NOTES:

? " ¾ "1" 2"

C
BOLTS 1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.

12"
2. SPECIFIC COLORS OF THE COLORS NOTED ARE

2"

1
BACKGROUND COLOR: TEAL SPECIFIED ON ES3301-02.

1
FONT COLOR: BLACK

1" 2
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
METROLINK OR PAINTED, UNLESS OTHERWISE NOTED.
3M EXTERIOR GRADE 4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.

TY P
2"
1
VINYL DIE CUT SHEETING 5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.

2
FONT COLOR: WHITE
COLOR: WHITE 6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
VEHICLE OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
-0"

-6"
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
2'

BORDER COLOR: BLACK

1'
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
PARKING COLOR.
8. PHONE NUMBERS AND ADDRESS TO BE VERIFIED BY SCRRA
SEE NOTE 8 AND CITY PRIOR TO FABRICATION.
LOGO COLOR
PER ES3301-02 ONLY

12"
1
1 7
12" 1 8"

5-2
LOGO COLOR PER ES3301-02

SIGN LAYOUT
5-1E C OF POST &
METROLINK VEHICLE PARKING ONLY B SIGN PANELS
2"

1"
MIN.

7-1 5-1E
1'-5"
SEE ES3311
1" R = ½"
ALIGN FONT

1"
1" 2"

SIGN PANELS
5-1S
1" 2"
1

BACKGROUND COLOR: TEAL

1 ½" SQUARE
4"

PRE-DRILLED
3

2"

GALVANIZED
1

FONT COLOR: WHITE STEEL SIGN

POST (TYP)

-8"
-0"

6'
2'

SEE NOTE 8

SEE ES3340
FOR POST
MOUNTING (TYP)
8"
5
1" 2

4"
3

1"
LOGO COLOR PER ES3301-02
FRONT VIEW SIDE VIEW
5-1S
CENTER MOUNT TO SQUARE POST

SIGN LAYOUT A ELEVATIONS C

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3309
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 5 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE NOTES, DETAILS & DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PARKING RESTRICTIVE SIGN B 1 OF 1
A 03-23-17 REVISED COPY LAYOUTS "A" & "C" AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 POLE MOUNTED CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3309
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:53 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_27\ES3309.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
7. SIGN AND FINISHES SHALL CONFORM TO CALIFORNIA
ACCESIBILITY STANDARDS.
8. OTHER PROPOSED ACCESSIBILITY PARKING SIGNS MUST
COMPLY WITH THE AMERICANS WITH DISABILITIES ACT
(ADA) ACCESIBILITY GUIDELINES AND CALIFORNIA
ACCESSIBILITY REGULATIONS CONTAINED IN TITLE 24,
1'-0" CALIFORNIA CODE OF REGULATIONS.

BACKGROUND COLOR:
ACCESS BLUE

C OF POST &
SIGN PANELS

1"
FONT & SYMBOL
COLOR: WHITE 6-1
2 '-0 "

1"
6-2 SIGN
BORDER COLOR: WHITE PANELS

6 '-8 "
1 ½" SQUARE PRE-DRILLED
GALVANIZED STEEL SIGN
POST (TYP)
6-1

BORDER COLOR: WHITE BORDER COLOR: WHITE

BACKGROUND COLOR: BACKGROUND COLOR:

ACCESS BLUE ACCESS BLUE
9"
8"

FONT COLOR: WHITE FONT COLOR: WHITE SEE ES3340 FOR

POST MOUNTING
(TYP)

NOTE: THIS SIGN ATTACHES TO POST

FRONT VIEW SIDE VIEW
1" BELOW BOTTOM EDGE OF EXISTING
6-2 6-3
ACCESSIBLE PARKING ONLY SIGNS
CENTER MOUNT TO SQUARE POST

SIGN LAYOUTS A ELEVATIONS B

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3310
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 6 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ACCESSIBLE PARKING A 1 OF 1
A 05-29-20 REVISED DETAILS AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 IDENTIFICATION SIGN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3310
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:11 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_28\ES3310.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
1'-5" 5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
C FONT AND
SURROUNDING COLOR.
SIGN PANEL
7. SIGN AND FINISHES SHALL CONFORM TO CALIFORNIA
ACCESIBILITY STANDARDS.
8. OTHER PROPOSED ACCESSIBILITY PARKING SIGNS MUST
COMPLY WITH THE AMERICANS WITH DISABILITIES ACT
(ADA) ACCESIBILITY GUIDELINES AND CALIFORNIA
EQ .

ACCESSIBILITY REGULATIONS CONTAINED IN TITLE 24,

CALIFORNIA CODE OF REGULATIONS.
9. PHONE NUMBERS AND ADDRESSES TO BE VERIFIED BY
"

UNAUTHORIZED VEHICLES
4

SCRRA AND CITY PRIOR TO FABRICATION.

3

BACKGROUND COLOR:
ACCESS BLUE
2"

PARKED IN DESIGNATED
1

ACCESSIBLE SPACES
NOT DISPLAYING C OF POST AND
SIGN PANEL
FONT COLOR: WHITE

1"
1'-0"
DISTINGUISHING PLACARDS MIN.

OR LICENSE PLATES 7-1 5-1E

SIGN PANEL

SEE ES3309
ISSUED FOR PERSONS

1"
1'-10 "

WITH DISABILITIES SIGN PANEL

5-1S

MAY BE TOWED AWAY AT SEE ES3309

OWNERS EXPENSE.
TOWED VEHICLES MAY BE

6 '-8 "

6 '-8 "
RECLAIMED AT
1 ½" SQUARE PRE-DRILLED
GALVANIZED STEEL SIGN
(ADDRESS) SEE NOTE 9
POST (TYP)

OR BY TELEPHONING
(TELEPHONE NUMBER)
EQ .

SEE ES3340 FOR

POST MOUNTING
(TYP)

7-1
FRONT VIEW SIDE VIEW

CENTER MOUNT TO SQUARE POST

SIGN LAYOUT A ELEVATIONS B

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3311
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 7 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ACCESSIBLE PARKING INFORMATION SIGN A 1 OF 1
A 05-29-20 REVISED DETAILS, NOTES & DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3311
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:58 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_29\ES3311.dgn
 1'-3" 3"
NOTES:
FONT COLOR:
WHITE 1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.

2"
1
1 2"
2. SPECIFIC COLORS OF THE COLORS NOTED ARE

1
2
SPECIFIED ON ES3301-02.
8¾" DIA
2"
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
1
CIRCLE
OR PAINTED, UNLESS OTHERWISE NOTED.
2
2"

4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.

1

5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.

1

6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED

OR STAINLESS STEEL AND PAINTED TO MATCH
1'-6 "

8"
SURROUNDING COLOR.

5
2"

6
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
1

SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT

7

COLOR.

ARROW
COLOR: WHITE

CIRCLE COLOR: R=½"

ORANGE (TYP)

PANEL COLOR:
8-1
TEAL

C OF SIGN PANEL
SIGN LAYOUT - FACE PANEL A RECTANGLE AND
POST

WALL

2" SQUARE PAINTED

STEEL POST
COLOR: WHITE

OF SIGN PANEL
C

PANEL COLOR:
TEAL MOUNT TOP EDGE
OF SIGN 1" BELOW
CROSS BAR

6 '-8 "

5 '-0 "
SIGN LAYOUT B
BACK PANEL SEE ES3340 FOR
POST MOUNTING
(TYP)
FLUSH MOUNT TO WALL/
FENCE MOUNT (LOW FENCE) CENTER MOUNT TO SQUARE POST FENCE MOUNT (HIGH FENCE)

ELEVATIONS C
SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3314
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 8 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TRACK DIRECTIONAL SIGN A 1 OF 1
A 05-29-20 REVISED DETAILS, NOTES AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3314
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:54 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_30\ES3314.dgn
 1'-3" 3"

1 BACKGROUND ARROW AND SYMBOL

1 2" 6"
COLOR: ACCESS BLUE COLOR: WHITE (TYP) NOTES:
PANEL COLOR:
1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.
TEAL

2"
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
1 SPECIFIED ON ES3301-02.
2
8¾" DIA 3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
CIRCLE OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
6"

5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.

6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
1'-6 "

8"
SURROUNDING COLOR.

5
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF

6
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
COLOR.

ARROW COLOR: WHITE

2"
1
2

CIRCLE COLOR: R=½"

ORANGE (TYP) 9-1
C OF SIGN PANEL
RECTANGLE AND
POST
SIGN LAYOUT A
WALL
FACE PANEL

3"
C OF SIGN
PANEL

PANEL COLOR:
TEAL
MOUNT TOP EDGE
OF SIGN 1" BELOW
CROSS BAR

5 '-0 "
4 '-11"
SEE ES3340 FOR 2" SQUARE PAINTED
POST MOUNTING STEEL POST
SIGN LAYOUT B
(TYP) COLOR: WHITE
BACK PANEL

FENCE MOUNT (LOW FENCE) CENTER MOUNT TO SQUARE POST FLUSH MOUNT TO WALL/
FENCE MOUNT (HIGH FENCE)

ELEVATIONS C
SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3315
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 9 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ELEVATOR DIRECTIONAL SIGN A 1 OF 1
A 05-29-20 REVISED DETAILS, NOTES AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3315
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:06 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_31\ES3315.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.

1'-3"

BACKGROUND COLOR: TEAL

ARROW COLOR:
ORANGE
2"

2"
FACE OF WALL

FASTENERS
AR R O W

(TYP)
4"

½" x 1'-5"
MOUNTING
BRACKET
1'-6 "

BACKGROUND COLOR: ACCESS BLUE

P IC T O
8"
1

S Q U AR E

6 '-8 "
SYBMOL COLOR: WHITE
9

2"
2"

1 1 5
3 4" 9 8" 2 8"

R=½" (TYP)
10-1
FLAG MOUNT TO MASONRY WALL

SIGN LAYOUT - DOUBLE SIDED A ELEVATION B

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3316
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 10 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ELEVATOR IDENTIFICATION SIGN A 1 OF 1
A 05-29-20 REVISE SIGN NUMBER AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 FLAG MOUNTED CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3316
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:19 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_32\ES3316.dgn
 4'-0"

3" 1'-2" 3" NOTES:

DIA

4"
BACKGROUND 1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.

3
COLOR: WHITE 2. SPECIFIC COLORS OF THE COLORS NOTED ARE

2
SPECIFIED ON ES3301-02.
CIRCLE/SLASH 3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
COLOR: RED OR PAINTED, UNLESS OTHERWISE NOTED.

3" 3"
Warning! 4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED

3"
Do Not SYMBOL COLOR: BLACK OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
7. SIGN 11-2 SPECIFIC NOTES:

1 2"
2 '-10 "
Cross Tracks

1
A. SIGN FILM/SHEETING TO BE 3M HIGH INTENSITY
When Gates Are Down FONT COLOR: BLACK PRISMATIC SERIES 3930-WHITE.

B. SIGN TO BE COATED WITH 3M 1160 PREMIUM

Trains Approach in PROTECTIVE OVERLAY.

C. SIGNS TO BE PLACED STARTING 50 FEET AWAY FROM

Both Directions NEAREST PEDESTRIAN CROSSING, ADDITIONAL SIGNS TO
BE SPACED 100 FEET APART AS NEEDED ALONG FENCING
TO COVER ENTIRE LENGTH OF PLATFORM.

11-1 D. FOR STATIONS THAT DO NOT HAVE INTERTRACK FENCING,

SIGNS ARE TO BE LOCATED ON STATION PLATFORM AT
LOCATIONS CLEARLY VISIBLE TO ALL PASSENGERS AND
PEDESTRIANS.
CROSSING WARNING SIGN

5'-6"

8"
9" DIA. RED STOP SYMBOL WITH
(TYP, 1½" X 8" WHITE BAR AT CENTER
1 OPP) C SYMBOLS
3 2" CLEAR 3¾" HIGH RED
UPPER CASE LETTERS
(TYP)
2"
2"

8"

1" X 2" SLOTTED HOLES

7"

1
5

MOUNT TOP EDGE OF SIGN

16 "

1" BELOW CROSS BAR

CAUTION!
13
11

FONT COLOR: BLACK

½ "
2 '-6"

8" 1 8"

STAY BEHIND YELLOW LINE

5

3" UPPER CASE LETTERS

1'-3 16 "

5
11

NOT ALL TRAINS STOP AT STATION! 2?" UPPER CASE LETTERS

16 "
1
3

½" THICK BLACK BORDER

Trespassers subject to arrest. CA Penal Code § 555, 369(i).

1
5"

2"
1½" RADIUS
2'-9"

C 1" DIA HOLES

1?" UPPER & LOWER CASE LETTERS

11-2

CAUTION SIGN FENCE MOUNT

SEE NOTE 7

SIGN LAYOUT A ELEVATION B

SEE NOTE 5

A. CARLOS 03/31/2011 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3317
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 11 NTS
C 05-29-20 REVISE DETAILS, SIGN NUMBER, NOTES & DRAWING TITLE AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 08-30-12 REVISED NOTE 2 AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PEDESTRIAN WARNING SIGNS C 1 OF 1
A 04/11/11 ADDED DETAIL "C" AND NOTES AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 AT STATION PLATFORMS CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3317
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:06 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_33\ES3317.dgn
 1'-0"

1" FONT COLOR: BLACK

4 "
1
1
"
4
3

" D IA .
1
8"
7

4
1
4
1'-2 "

SYMBOL
COLOR: RED

PANEL COLOR: WHITE

1"
8"
5
2" 1
1
1

12-1 12-2 12-3

SIGN LAYOUT A

MOUNT TOP EDGE OF

SIGN 4" BELOW
CROSS BAR

NOTES:
1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
7. SEE ES4002-01 FOR SIGN SELECTION CRITERIA AT GATES.

FENCE MOUNT
ELEVATION B
SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3318
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 12 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PEDESTRIAN DIRECTIONAL SIGN A 1 OF 1
A 05-29-20 REVISED DETAILS, NOTES AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 GATE MOUNTED CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3318
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:01 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_34\ES3318.dgn
 1'-6"

NOTES:
C OF PANEL,
FONT AND 1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.
ARROWS 2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
SIGN FILM/SHEETING 5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
TO BE 3M HIGH 6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
INTENSITY PRISMATIC OR STAINLESS STEEL AND PAINTED TO MATCH
SERIES 3930-WHITE SURROUNDING COLOR.
9"

ARROW COLOR: BLACK

BORDER COLOR:
FONT COLOR: BLACK
BLACK 1 ½" SQUARE PRE-DRILLED
GALVANIZED STEEL SIGN
POST )TYP)

13-1

3'-0" FROM GATE

SIGN LAYOUT A

S IG N
OF
C ENTER
TO
5 '-0 "

SEE ES3340 FOR

POST MOUNTING
(TYP)

CENTER MOUNT TO SQUARE POST

ELEVATION B
SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3319
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 13 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE SIGN NUMBER AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PEDESTRIAN DIRECTIONAL LOOK SIGN B 1 OF 1
A 11-15-16 REVISED DETAIL B AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 POST MOUNTED CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3319
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:15 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_35\ES3319.dgn
 3'-6"

3'-6"

2"
FONT COLOR: WHITE
(TYP)

3"
2"
3"

18"
1
3"

-4"
1'
2"
1
-0
1'

1"

2" LOGO COLOR PER PANEL COLOR: TEAL

ES3301-02 (TYP) 14-1 (TYP) 14-2

SMALL LARGE

SIGN LAYOUT A

C OF LIGHT STANDARD
& SIGN CABINET
C OF LIGHT STANDARD
TOP OF SIGN SIGN CABINET
SIGN CABINET & SIGN CABINET

1"
14-2
SEE DETAIL 1
ON ES3320-02

SEE DETAIL 2
ON ES3320-02
FOR SIGN

-6"
17-6 MOUNTING

1'
HEIGHT
SEE ES3324 NOTES:
17-6 1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
FACE OF SIGN TO BE PORCELAIN ENAMEL.
SEE ES3324
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
-0"

LIGHT 5. FOR SIGN MOUNTING DETAILS, SEE DETAIL 1 ON ES3320-02.

8'

STANDARD 6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED

3" SQ. PAINTED
OR STAINLESS STEEL AND PAINTED TO MATCH
STEEL POST
COLOR: WHITE SURROUNDING COLOR.
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
SIGNS TO SIDES.
8. APPLY QUALITY PRIMER TO ALL PAINTED SURFACES TO
PREVENT ELECTROLYSIS.
9. PLACEMENT OF OFF PLATFORM SIGNS SHALL BE DIRECTLY
LANDSCAPE OPPOSITE OF STATION IDENTIFICATION SIGN ON PLATFORM.
SEE ES3340 FOR CONDITION
POST MOUNTING
(TYP)

SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW

CENTER MOUNT TO ROUND POLE - ON PLATFORM CENTER MOUNT TO SQUARE POST - OFF PLATFORM
SEE NOTE 9

ELEVATION B

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3320
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 14 REVISION SHEET
B 05-29-20 REVISE DETAILS, SIGN NUMBER AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY STATION IDENTIFICATION SIGNS B 1 OF 2
A 03-23-17 REVISED COPY LAYOUT "A" AND ELEVATION "D" AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3320-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:16 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_36\ES3320-01.dgn
 NOTE:
FOR NOTES SEE ES3320-01.

C TRACK C POST
9'-9" MIN.

9'-6" CLEAR
TO FACE OF SIGN

PROVIDE INTERNAL METAL

STIFFENERS WITH STYROFOAM 1"
FILLER TO PREVENT OIL-CANNING,
TWO-PART PORCELAIN ENAMEL
BENDING AND CURVING OF PANEL
SIGN CABINET

LIGHT POLE

LIGHT STANDARD
17-6
SEE ES3324

GN 14-1

GN 14-2
- 2" FOR SI

-4" FOR SI

8'
8'
1

1'
1'

TAMPER PROOF FASTENERS ?" THICK PAINTED ALUMINUM

BACK PANEL COLOR: TEAL

DETAIL 1 DETAIL 2

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3320
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES SIGN TYPE 14 REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE DETAILS, SIGN NUMBERS, DRAWING NUMBER & TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY STATION IDENTIFICATION SIGN B 2 OF 2
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 03-24-17 REVISED ELEVATION "A" AC DJM
AT TRACK CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3320-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:22 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_43\ES3320-02.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
1'-6"
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
C OF SIGN PANEL, OR STAINLESS STEEL AND PAINTED TO MATCH
SYMBOL & FONT SURROUNDING COLOR.

1"

2"
SYMBOL

1
1
COLOR: BLACK
" 2"

RAILROAD
4
3
" 4
3
5

BORDER C OF PANEL & POST

COLOR: BLACK

"
2"

4
1 ½" SQUARE PRE-DRILLED

1
R R
3"
1
1'-2

GALVANIZED STEEL SIGN

POST (TYP)
3M EXTERIOR GRADE
REFLECTIVE VINYL
OF SIGN
DIE CUT SHEETING
2 '-6 "

PANEL
COLOR: WHITE C
"
4
1
1 2"

CROSSING

5 '-0 "

W A LK W A Y
1"

6 '-8 " M IN .
2"

PEDESTRIANS
1
1 2"

FONT COLOR: BLACK

AND BICYCLES

IN
IF
2"

ONLY
2"

2"
1
1

?" DIA HOLES FOR ?" DIA SEE ES3340 FOR

R = 1½" (TYP)
GALVANIZED BOLTS POST MOUNTING
(TYP)
15-1

FRONT VIEW SIDE VIEW

CPUC STANDARD 1-D CENTER MOUNT TO SQUARE POST

SIGN LAYOUT A ELEVATIONS B

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3322
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 15 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE DETAILS AND SIGN NUMBER AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CPUC RAILROAD CROSSING SIGN B 1 OF 1
A 10-07-16 REVISE DETAILS AND SIGN NUMBER AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 POST MOUNTED
REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN
ALL RIGHTS RESERVED. ES3322
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:29 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_38\ES3322.dgn
 1'-0" 6"
NOTES:
1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
C OF SIGN PANEL
SPECIFIED ON ES3301-02.

1"
& SYMBOL
EQ EQ 3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED

RAMP DOW N
OR PAINTED, UNLESS OTHERWISE NOTED.
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
EQ

6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED

4"
OR STAINLESS STEEL AND PAINTED TO MATCH
16-1a
SURROUNDING COLOR.
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
COLOR.

1"
FLANGE
BOTTOM
C OF TRACK
16-1a OF RAMP
1'-0 "

18-1
8"

SEE ES3325

SYMBOL COLOR: WHITE

ALIGN WITH BOTTOM

OF RAMP
BACKGROUND COLOR:
ACCESS BLUE DETAIL 1
EQ

16-1 R=½" (TYP)

SIGN LAYOUTS A

POST AND
SIGN PANEL
POST AND
C SIGN PANEL C
16-1a 16-1a

1"
16-1a
2" SQ. PAINTED

RAMP DOW N
STEEL POST 18-1
COLOR: WHITE
SEE ES3325
MODIFIED TYPE R5-1 18-1
SIGN, SEE ES3101-01 HANDRAIL
FOR DETAILS SEE ES3325

DO NOT 1'-0"

ENTER

SEE ES3340 FOR

POST MOUNTING
(TYP)

RAMP DN
EDGE OF
SIGN POST
PLATFORM
SEE DETAIL 1

MODIFIED TYPE R5-1 SIGN

SEE ES3101-01 FOR DETAILS
FRONT VIEW SIDE VIEW
CENTER MOUNT TO SQUARE POST
ELEVATION B PLAN C
SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3323
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 16 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ACCESSIBILITY SIGN A 1 OF 1
A 05-29-20 REVISE DETAILS, SIGN NUMBER & DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3323
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:15 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_39\ES3323.dgn
 1'-0" C

1" ALIGN BOLTS

1"
NOTES: 3M EXTERIOR GRADE
1'-0" VINYL DIE CUT SHEETING
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
Please purchase COLOR: WHITE
2. SPECIFIC COLORS OF THE COLORS NOTED ARE 1

? "
12"

2"
Metrolink tickets
SPECIFIED ON ES3301-02.

1
1"
at vending machines
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED

12"
prior to boarding

2"
OR PAINTED, UNLESS OTHERWISE NOTED.

1
-0"

4"
4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.

1'
Favor de comprar boleto

1"

3
5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340. Valid Fare

1 16"
Metrolink en el vendedor
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED Required Beyond

1
1½"

(TY P)

9"
OR STAINLESS STEEL AND PAINTED TO MATCH automatico antes de

16"
This Point
abordaje

8"
1"

11
SURROUNDING COLOR.

2½ "

? "
Comprobante de pasaje

5
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF

1"
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT valido requerido

4"
Mas alla de este punto

-3"
COLOR.

-6"

3
1" LOGO COLORS PER

1'

1'

2"
(TYP) ES3301-02 (TYP)

1
Fine may

1 16"
1
17-1 exceed $1,500
Multa de hasta $1,500

8"
Penal Code CA 640 (c)
C SIGN AND FONT C SIGN AND FONT

2"
5
BORDER COLOR: RED

1
ENGLISH FONT:
BERTOLD AKZIDENZ

1¼ "
ARROW

12"
GROTESK SUPER 1" ALIGN

1"
COLOR: ORANGE

1
R 1 ½"

1"
½ "
PANEL COLOR: TEAL
1"
No bicycling,
Purchase (UNLESS OTHERWISE

? "
3"
1¼ "
NOTED) rollerskating or
1"

1"
Tickets Here skateboarding allowed 17-8

¾ "
on platform.
1"

FONT COLOR:
Compre

3"
Exit

1"
SPANISH FONT: WHITE (TYP) 1'-6"
No se permiten bicicletas,
1? "1"

BERTOLD AKZIDENZ
½ "

Boletos Aqui

¾ "
GROTESK MEDIUM patines o patinetas en la
C

2"
plataforma.
Salida

? "

1
3"
BOLTS

1"

12"
2"

1
R = ½"

2"
(TYP)
Valid Fare 3M EXTERIOR GRADE
VINYL DIE CUT SHEETING

"
17-2 17-3 17-4 COLOR: WHITE

Required on

2?
1" ALIGN
GRAPHICS, ARROW C SIGN AND FONT

1" ALIGN
45
°
?" SPACE
AND FONT COLOR: WHITE

2" 2"
the Platform
?" STRIPE
and on

1? "
1"

1"

"
-3"
1" 2? "
1¼ "

2'
1" 2¾ "

1?
the Train

3"
Do Not Enter PANEL COLOR:
½ "½ "¾ "¾ " ½ "¾ "
? "

1¾ " 1"
YELLOW
¾ "

1"
Railroad Right of Way Persons without

¾ "
Thank you for
¾ "

California Penal Code Section 369i

To Trains
1¾ "

not smoking. valid fare are subject

1"

1½ "
No Entrar. Prioridad
Gracias por no fumar. STRIPES & A los Trenes to a fine that may
¾ "

de Paso a ferrocarril. FONT COLOR:

1"
exceed $1,500

? "
BLACK

½ " 1"
Codigo Penal de California
1¼ "

Seccion 369i Penal Code CA 640 (c)

¾ "

PANEL COLOR:
ACCESS BLUE

12"
17-5 17-6 17-7

1
BORDER COLOR: RED R 1 ½"

17-9

SIGN LAYOUTS A SIGN LAYOUTS - FARE REQUIRED SIGN B

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3324
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-29-20 REVISED SIGN NUMBERS AND DRAWING TITLE AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS

B 08-01-19 REVISED DRAWING NUMBER AC JM

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 17 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PEDESTRIAN RESTRICTIVE / INFORMATION SIGN C 1 OF 2
A 03-24-17 REVISED SIGN LAYOUTS AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3324-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:27 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_40\ES3324-01.dgn
 NOTE:

SEE ES3324-01 FOR NOTES.

CANOPY

C OF POST & C OF LIGHT STANDARD

SIGN PANEL POLE & SIGN PANEL
WALL

SIGN PANEL SIGN PANEL

SIGN PANEL
SIGN PANEL

C OF SIGN
PANEL
MOUNT TOP EDGE
OF SIGN 1" BELOW
CROSS BAR

-8"

-8"
-8"

2" SQUARE

6'

6'
STEEL POST
6'

COLOR: WHITE
-0"

SIGN PANEL
5'

FENCE

CENTER MOUNT CENTER MOUNT

FLUSH MOUNT TO WALL TO SQUARE POST TO ROUND POLE CANOPY MOUNT FENCE MOUNT

ELEVATIONS A

A. CARLOS 05/02/19 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3324
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED 3" = 1'-0"
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 17 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PEDESTRIAN RESTRICTIVE / INFORMATION SIGN A 2 OF 2
A 05-29-20 REVISE SIGN NUMBER AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3324-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:59 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_81\ES3324-02.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF ?" THICK ACID ETCHED
ZINC WITH ROLLER-COATED COLOR AND CLEAR MATTE
PROTECTIVE COATING.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
OR PAINTED, UNLESS OTHERWISE NOTED.
4. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
5. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
6. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
COLOR.

1'-0"

1"
1"
1¼ "

?" RAISED TACTILE

FONT COLOR: WHITE
8"

C POST & SIGN PANEL

7
1

1"
PANEL COLOR: TEAL
1'-0 "

SEE NOTE 1 2" SQUARE PAINTED

STEEL POST
COLOR: WHITE

4 '-0 "
M IN .
8"

CALIFORNIA CONTRACTED
3

BRAILLE

R = ½" (TYP.)
SEE ES3340 FOR
18-1 POST MOUNTING
(TYP)
SIDE VIEW FRONT VIEW

CENTER MOUNT TO SQUARE POST

SIGN LAYOUT A ELEVATION B

SEE NOTE 4

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3325
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 18 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ADA STATION IDENTIFICATION SIGN (BRAILLE) A 1 OF 1
A 05-29-20 REVISE SIGN NUMBER AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3325
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:27 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_41\ES3325.dgn
 NOTES:
1. KIOSK CABINET SHALL BE FABRICATED STAINLESS STEEL W/ VERTICAL
GRAIN BRUSHED FINISH. CABINET SHALL BE CONSTRUCTED WITH INTERNAL
STEEL STRUCTURE AS REQUIRED. ALL CORNERS SHALL BE REINFORCED
TO PREVENT SEPARATION.
2. CABINET SHALL HAVE NO VISIBLE SEAMS.
3. CABINET SHALL BE WEIGHTED AND ANCHORED TO EXISTING HARDSCAPE
(CONDITIONS VARY) FOR SAFE AND SECURE INSTALLATION. DESIGN OF
CABINET AND FASTENINGS SHALL SATISFY ALL CODES AND WIND LOAD
FACTORS.
4. CABINET SHALL BE WEATHERPROOFED.
5. CABINET DOORS SHALL HAVE STAINLESS STEEL COUNTERSUNK, TAMPERPROOF
2'-6" STAR-HEAD BOLTS ON NON-HINGED SIDE. WELD NUT TO BOLT ON INTERIOR
SIDE OF DOOR TO PREVENT BOLTS FROM BEING REMOVED.
3" 3"
6. CABINET SHALL HAVE INTERIOR STORAGE SHELF.
7. CABINET SHALL HAVE ONE HINGED INTERIOR PANEL TO ACCESS STORAGE SHELF.
1 ½" 1 ½" PROVIDE NON-HINGED SIDE OF PANEL W/ STAR-HEAD BOLTS.
8. ACCESS TO CABINET SHALL BE BY REMOVING BOLTS ALONG LEFT SIDE OF DOORS.
LOGO TO BE ETCHED INTO ALL FOUR 9. SHOW ALL DETAILS ON SHOP DRAWINGS.
10. PROVIDE CHANNELS TO FACILITATE REPLACEMENT OF CLEAR WINDOW PANELS.
3"

SIDES; DO NOT FILL WITH PAINT

LOGO
1" 4"
-3"
1'

1 ¾" LOGO
C OF CABINET RIDGE
1½ "

& LOGO

¼" REVEAL
3"

CONCEALED HINGE ALONG RIGHT

EDGE OF DOORS

STAINLESS STEEL DOOR TO BE

FLUSH WITH SURFACE OF FRAME
-6"

OPENING SIZE WINDOW TO BE ¼" (MIN.)

3'

24" X 36" CYROLON AR POLYCARBONATE

3'

PANEL WITH ABRASION RESISTANT

COATING ON EXTERIOR SURFACE

TAMPER PROOF BOLT

-9"

TOP AND BOTTOM OF

7'

DOOR

BACK PANEL TO BE PAINTED STEEL

SUFFICIENT TO ACCEPT MAGNETS OR
TAPED MAPS. COLOR: WHITE
3"

¼" REVEAL DIRECTION OF INTERIOR

1½ "

STAINLESS STEEL STORAGE SHELF

GRAIN

INTERNAL STORAGE SHELF

-6"
2'
PERMANENTLY ANCHOR
BASE TO EXISTING
HARDSCAPE, SEE NOTE 3
RIDGE OF CABINET
6"

19-1

KIOSK LAYOUT A PLAN - KIOSK ROOF B ISOMETRIC VIEW C

NOTE: ALL SIDES IDENTICAL.

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3326
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 19 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE SIGN NUMBER AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MAP / INFO KIOSK B 1 OF 1
A 03-24-17 REVISED LOGO AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 FREESTANDING CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3326
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:34 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_42\ES3326.dgn
 O F LOG O/SYM BO L
ANCHOR DISPLAY NOTES:
CASE TO WALL
3" SQUARE LOGO LOGO TO BE ETCHED WALL
AS REQUIRED 1. DISPLAY CASE SHALL BE FABRICATED STAINLESS STEEL WITH

PANEL
INTO FRONT OF PANEL:
DO NOT FILL WITH PAINT VERTICAL GRAIN BRUSHED FINISH. CASE SHALL BE CONSTRUCTED
2'-6" ½" REVEAL WITH INTERNAL STEEL STRUCTURE. ALL CORNERS SHALL BE

2"
SEE DETAIL 4 DISPLAY CASE

1
EQ. EQ. STAINLESS STEEL REINFORCED TO PREVENT SEPARATION.

2
&
TOP PANEL 2. CASE SHALL HAVE NO VISIBLE SEAMS.
3. CASE SHALL BE WEIGHTED AND ANCHORED TO EXISTING HARDSCAPE
4"

2'-6"
C 1.05 LOGO LETTER HEIGHT (CONDITIONS VARY) FOR SAFE AND SECURE INSTALLATION. DESIGN
OF CABINET AND FASTENINGS SHALL SATISFY ALL LOCAL CODES
3"

¼" REVEAL AND WIND LOAD FACTORS.

DETAIL 1
12"

4. CASE SHALL BE WEATHERPROOFED.

1

5. CASE DOORS SHALL HAVE STAINLESS STEEL COUNTERSUNK,

CONCEALED HINGE ALONG TAMPERPROOF STAR-HEAD BOLTS ON NON-HINGED SIDE. WELD NUT
RIGHT EDGE OF DOORS TO BOLT ON INTERIOR SIDE OF DOOR TO PREVENT BOLTS FROM
BEING REMOVED.
STAINLESS STEEL DOOR TO BE
6. SHOW ALL DETAILS ON SHOP DRAWINGS.
FLUSH WITH SURFACE OF FRAME
7. PROVIDE CHANNELS TO FACILITATE REPLACEMENT OF CLEAR WINDOW
ANCHOR DISPLAY CASE DISPLAY CASES
VERIFY PANELS.
TO POST AS REQUIRED
-6"

¼" (MIN.) CYROLON AR POLYCARBONATE (TYP)

3'

OPENING SIZE
3'

2"
24" X 36" PANEL WITH ABRASION RESISTANT COATING

1
ON EXTERIOR SURFACE

2
3" SQUARE STEEL POST

ES
V ARI
EXISTING POST ¼" PAINTED SPACER
COLOR: WHITE (TYP)
½" STANDOFF

2"
SEE DETAIL 4

1
(TYP)

2
12"

BACK PANEL TO BE PAINTED STEEL

1

SUFFICIENT TO ACCEPT MAGNETS OR

TAPED MAPS, COLOR: WHITE 2'-6" ANCHOR DISPLAY DISPLAY CASE
3"

CASE TO POST
(TYP)
TAMPER PROOF BOLTS
TOP & BOTTOM OF DOOR DETAIL 2 DETAIL 3

20-1

DISPLAY CASE LAYOUT A WALL/CANOPY POST

WALL ANCHOR (TYP)

TOP PANEL

REVEAL

3" SQUARE STEEL POST

6" DISPLAY COLOR: WHITE (TYP)
CASE
ALIGN

FRONT OF CASE FRONT OF

(TYP, OPP.) CASE
DISPLAY CASE

-8"
-8"
-8"

-8"

6'
6'
6'

6'

BACK-TO-BACK
DISPLAY CASE ON
EXISTING POSTS

CONCRETE FOOTING OR
FLANGE-MOUNT AS REQUIRED.
SIGN CONTRACTOR TO ENGINEER
WALL MOUNTED FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW DETAILS AND SHOW ON SHOP
SEE DETAIL 1 DRAWINGS.

CANOPY POST MOUNTED POST MOUNTED ½" SPACER

SEE DETAIL 2 SEE DETAIL 3

ELEVATION B DETAIL 4

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3328
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 20 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE DETAILS, SIGN NUMBER AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY DISPLAY CASE B 1 OF 1
A 03-27-17 REVISED ELEVATION "B" AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 WALL OR POST MOUNTED CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3328
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:41 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_44\ES3328.dgn
 1'

C OF FONT &
SIGN PANEL
NOTES:

8"
1. SIGN TO BE CONSTRUCTED OF ?" THICK ALUMINUM.
3M EXTERIOR GRADE
1 2. SPECIFIC COLORS OF THE COLORS NOTED ARE
3 REFELCTIVE VINYL
SPECIFIED ON ES3301-02.
DIE CUT SHEETING
2"

3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED

COLOR: WHITE
1

OR PAINTED, UNLESS OTHERWISE NOTED.

2
1'

4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.

2"

FONT COLOR: BLACK 5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
1

6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED

3

OR STAINLESS STEEL AND PAINTED TO MATCH

SURROUNDING COLOR.
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
COLOR.
21-1 R = ½" (TYP) 8. SEE ES3330-03 THROUGH ES3330-06 FOR SIGN
PLACEMENT AT STATIONS.
2"

3M EXTERIOR GRADE
REFELCTIVE VINYL
DIE CUT SHEETING

4 5 6
5"

COLOR: WHITE
1"

FONT COLOR: BLACK

2"

21A-3 21A-5 21A-4 21A-6

SIGN LAYOUTS A

FONT COLOR:
WHITE
"
1'

4
1
4

4 5 6
4 5"
1"
2"
"
1'

1
4

21B-4 21B-5 21B-6

C OF FONT & 3M EXTERIOR GRADE

SIGN PANEL REFELCTIVE VINYL
DIE CUT SHEETING
21B-3 COLOR: WHITE

SIGN LAYOUTS B

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3330
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES

B 05-29-20 REVISE DETAILS, SIGN NUMBERS AND DRAWING TITLE AC JMM

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 21 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TRAIN POSITION MARKER B 1 OF 6
A 04/18/12 REVISED ELEVATION "E" AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3330-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:37 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_46\ES3330-01.dgn
 NOTE:
1. SEE ES3330-01 FOR NOTES.

SIGN PANEL
MOUNTED FLAT
CANOPY TO CANOPY ROOF

STEEL CANOPY
STRUCTURE

ATTACH SIGN PANEL

TO CANOPY STRUCTURE
WITH TAMPERPROOF BOLTS

DETAIL 1 DETAIL 2

C OF POST AND
3" SQUARE PAINTED SIGN PANEL
3" SQUARE PAINTED
STEEL POST COLOR: STEEL POST COLOR:
WHITE WHITE

C OF POST AND
SIGN PANEL

SIGN TYPE 14

12 '
3" SQUARE PAINTED
LIGHT

8 ' M IN .
STEEL POST COLOR:
STANDARD/
WHITE
POLE
11'-4 "

C TRACK

TOP OF
PLATFORM
TOP OF RAIL
SEE ES3340
FOR POST
MOUNTING
(TYP)

FLAG MOUNT FLAG MOUNT CENTER MOUNT CENTER MOUNT TO SQUARE POST CANOPY MOUNTED
TO SQUARE POLE TO ROUND POLE TO SQUARE POST OFF PLATFORM (SEE DETAIL 1 OR 2)

ELEVATION C

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3330
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 21 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TRAIN POSITION MARKER A 2 OF 6
A 05-29-20 REVISE DETAILS, SIGN NUMBERS AND DRAWING TITLE AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3330-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:42 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_47\ES3330-02.dgn
 NOTES:
1. THIS LAYOUT REPRESENTS A TYPICAL METROLINK STATION
PLATFORM AND IS SHOWN FOR REFERENCE ONLY. ACTUAL
STATIONS MAY VARY FROM THIS PLAN.
2. SEE ES3330-01 FOR SIGN DETAILS.
3. SIGNS ARE SHOWN OFF PLATFORM. SITE CONDITIONS MAY VARY
REQUIRING SIGNS TO BE PLACED ON PLATFORM OR ON OPPOSITE
SIDE OF TRACKS.
4. FIELD LOCATE SIGNS TO ENSURE NO OBSTRUCTIONS TO THE
TRAIN ENGINEER.

AWAY FROM LOS ANGELES TO LOS ANGELES

OUTBOUND INBOUND

C MINI-HIGH PLATFORM

85'-0" 85'-0" 85'-0" 253'-6" 50'-0"

21B LONG LOCOMOTIVE

85'-0" 85'-0" 85'-0" 241'-0" 50'-0"

21A SHORT LOCOMOTIVE

21B-6 21A-6 21B-5 21A-5 21B-4 21A-4 21B-3 21A-3

PLATFORM

TRACK

21-1

SIDE PLATFORM - SINGLE

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3330
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 21 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE SIGN NUMBERS AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY SIDE PLATFORM-SINGLE B 3 OF 6
A 04/19/12 REVISED SPOT CAB DIMENSIONS AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 TYPICAL MARKER LOCATION PLAN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3330-03
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:34 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_48\ES3330-03.dgn
 NOTES:
1. THIS LAYOUT REPRESENTS A TYPICAL METROLINK STATION PLATFORM
AND IS SHOWN FOR REFERENCE ONLY. ACTUAL STATIONS MAY
VARY FROM THIS PLAN.
2. SEE ES3330-01 FOR SIGN DETAILS.
3. SIGNS ARE SHOWN OFF PLATFORM. SITE CONDITIONS MAY VARY
REQUIRING SIGNS TO BE PLACED ON PLATFORM OR ON OPPOSITE
SIDE OF TRACKS.
4. FIELD LOCATE SIGNS TO ENSURE NO OBSTRUCTIONS TO THE
TRAIN ENGINEER.
5. WHERE MINI-HIGH PLATFORMS DO NOT ALIGN, TWO SETS OF
CAR-LOCATOR SIGNS WILL BE REQUIRED.

AWAY FROM LOS ANGELES TO LOS ANGELES

OUTBOUND INBOUND

C MINI-HIGH PLATFORM

85'-0" 85'-0" 85'-0" 253'-6" 50'-0"

21B LONG LOCOMOTIVE

85'-0" 85'-0" 85'-0" 241'-0" 50'-0"

21A SHORT LOCOMOTIVE

21B-6 21A-6 21B-5 21A-5 21B-4 21A-4 21B-3 21A-3

21-1
PLATFORM
(SEE NOTE 5)

TRACK 2

FENCE

TRACK 1

21-1
PLATFORM

50'-0"
SIDE PLATFORM - DUAL
C MINI-HIGH PLATFORM

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3330
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 21 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE PLAN, SIGN NUMBERS AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY SIDE PLATFORMS-DUAL B 4 OF 6
A 04/19/12 REVISED SPOT CAB LOCATIONS AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 TYPICAL MARKER LOCATION PLAN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3330-04
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:48 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_49\ES3330-04.dgn
 NOTES:
1. THIS LAYOUT REPRESENTS A TYPICAL METROLINK STATION
PLATFORM AND IS SHOWN FOR REFERENCE ONLY. ACTUAL
STATIONS MAY VARY FROM THIS PLAN.
2. SEE ES3330-01 FOR SIGN DETAILS.
3. SIGNS ARE SHOWN OFF PLATFORM. SITE CONDITIONS MAY VARY
REQUIRING SIGNS TO BE PLACED ON PLATFORM OR ON OPPOSITE
SIDE OF TRACKS.
4. FIELD LOCATE SIGNS TO ENSURE NO OBSTRUCTIONS TO THE
TRAIN ENGINEER.
5. FOR SIDE OR CENTER STATION PLATFORMS, WHERE SERVICE IS
BI-DIRECTIONAL WITH MINI-HIGH PLATFORMS ON BOTH ENDS OF
THE PLATFORM, ADDITIONAL SET OF TYPE 21 SIGNS TO BE
PLACED ON INBOUND TRACK. SIDE PLATFORMS SHOWN.

AWAY FROM LOS ANGELES TO LOS ANGELES

OUTBOUND INBOUND
C MINI-HIGH PLATFORM

85'-0" 85'-0" 85'-0" 253'-6" 50'-0"

21B LONG LOCOMOTIVE

85'-0" 85'-0" 85'-0" 241'-0" 50'-0"

21A SHORT LOCOMOTIVE

21B-6

21A-6 21B-5 21A-5 21B-4 21A-4 21B-3 21A-3

21-1

PLATFORM

TRACK 2

FENCE

TRACK 1

PLATFORM

21-1

21A-3 21B-3 21A-4 21B-4 21A-5 21B-5 21A-6

21A-6
50'-0" 241'-0" 85'-0" 85'-0" 85'-0"
21A SHORT LOCOMOTIVE

50'-0" 253'-6" 85'-0" 85'-0" 85'-0"

21B LONG LOCOMOTIVE

C MINI-HIGH PLATFORM

SIDE PLATFORM - BI-DIRECTIONAL SERVICE

SEE NOTE 5

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3330
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 21 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE PLAN, SIGN NUMBERS AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY SIDE PLATFORMS - BI-DIRECTIONAL SERVICE B 5 OF 6
A 04/19/12 REVISED SPOT CAB LOCATIONS AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 TYPICAL MARKER LOCATION PLAN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3330-05
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:42 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_50\ES3330-05.dgn
 NOTES:
1. THIS LAYOUT REPRESENTS A TYPICAL METROLINK STATION
PLATFORM AND IS SHOWN FOR REFERENCE ONLY. ACTUAL
STATIONS MAY VARY FROM THIS PLAN.
2. SEE ES3330-01 FOR SIGN DETAILS.
3. SIGNS ARE SHOWN OFF PLATFORM. SITE CONDITIONS MAY VARY
REQUIRING SIGNS TO BE PLACED ON PLATFORM OR ON OPPOSITE
SIDE OF TRACKS.
4. FIELD LOCATE SIGNS TO ENSURE NO OBSTRUCTIONS TO THE
TRAIN ENGINEER.

AWAY FROM LOS ANGELES TO LOS ANGELES

OUTBOUND INBOUND

C MINI-HIGH PLATFORM

85'-0" 85'-0" 85'-0" 253'-6" 50'-0"

21B LONG LOCOMOTIVE

85'-0" 85'-0" 85'-0" 241'-0" 50'-0"

21A SHORT LOCOMOTIVE

21B-6 21A-6 21B-5 21A-5 21B-4 21A-4 21B-3 21A-3

TRACK

PLATFORM

TRACK

21-1

CENTER PLATFORM

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3330
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
SIGN TYPE 21 NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISE PLAN, SIGN NUMBERS AND DRAWING TITLE AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CENTER PLATFORM B 6 OF 6
A 04/19/12 REVISED SPOT CAB LOCATIONS AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 TYPICAL MARKER LOCATION PLAN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3330-06
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:45 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_51\ES3330-06.dgn
 NOTES:
1. SIGN TO BE CONSTRUCTED OF 1/8" THICK ALUMINUM.
2. SPECIFIC COLORS OF THE COLORS NOTED ARE
SPECIFIED ON ES3301-02.
3. FONTS, SYMBOLS AND ARROWS SHALL BE SILKSCREENED
SYMBOL OR PAINTED, UNLESS OTHERWISE NOTED.
COLOR: BLACK 4. SEAL SIGN WITH TRANSPARENT ANTI-GRAFFITI FILM.
(TYP) 5. FOR SIGN MOUNTING DETAILS, SEE DETAILS ON ES3340.
6. ALL FASTENERS AND MOUNTINGS SHALL BE GALVANIZED
OR STAINLESS STEEL AND PAINTED TO MATCH
SURROUNDING COLOR.
7. CONTINUE PAINT COLOR USED ON FRONT SURFACE OF
SIGNS TO SIDES. PAINT BACK OF PANEL WITH DOMINANT
COLOR.

BACKGROUND
COLOR: WHITE
(TYP) SOLAR PANEL
(BY OTHERS)

DETAIL 1
SCALE: NONE
SOLAR PANEL & ANTENNA
(BY OTHERS)

SIGN PANEL SIGN PANEL SIGN PANEL

LOGO COLOR PER

ES3301-02 2'-6"

1
2"3 2" C
CONTRAST STRIPE
COLOR: ORANGE
2"

1"

PANEL COLOR: TEAL

REFLECTIVE VINYL
2"
DIE CUT GRAPHICS CALL BOX
CALL BOX
SEE DETAIL 1 (BY OTHERS)
(BY OTHERS)
7"
-0"

1½ "3" 2"
-9"
3'

-0"
1'

8'
REFLECTIVE VINYL
DIE CUT FONT
COLOR: WHITE
3"
6"

2" 2" R = ½" (TYP)

MOUNTING SCREWS
1"
OR LAG BOLTS

FRONT VIEW SIDE VIEW

CENTER MOUNT TO SQUARE POST

SIGN LAYOUT A ELEVATION B

SCALE: 1½" = 1'-0" SCALE: NONE

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3332
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED AS NOTED
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES

B 05-29-20 REVISED DETAILS AND DRAWING TITLE AC JMM

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF SIGN TYPE 22 REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY PASSENGER INFORMATION TELEPHONE B 1 OF 1
A 03-22-17 REVISED SIGN DETAILS AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3332
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:49 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_52\ES3332.dgn
 LIGHT STANDARD/POLE STAINLESS STEEL
STRAPS

POLE SIGN PANEL BACK SIGN PANEL

SIGN PANEL
MOUNTS TO BACK SQUARE POLE
STAINLESS SQUARE POLE
SIDE OF BRACKET
STEEL STRAP
SIGN FACE

SIGN PANEL
TAMPER PROOF H4-D-007 STRAP ON POLE
FASTENERS L-MOUNT BRACKET
STAINLESS STEEL WING BRACKET #11-11F
AS MANUFACTURED AS MANUFACTURED BY
BY WESTERN HIGHWAYS AMERICAN SIGN BRACKETS
OR APPROVED EQUAL OR APPROVED EQUAL

SQUARE POLE

1 FLAG MOUNT TO ROUND POLE 2 FLAG MOUNT TO SQUARE POLE

BOLT SIGN PANEL TO WALL

WITH TAMPERPROOF
CONCRETE ANCHOR
SIGN PANEL SIGN PANEL
FABRICATED STEEL BRACKET BOLT SIGN PANEL
STEEL PAINT COLOR: GRAY TO POST WITH
POST TAMPERPROOF
SIGN PANEL LAG BOLT
FASTENERS SIGN PANEL ATTACHED EXISTING
MASONRY SIGN PANEL
TO METAL WITH VHB
TAPE AND SILICONE WALL
TAMPER PROOF METAL SURFACE
FASTENERS

WOOD POST STEEL POST METAL WALL MASONRY WALL

3 FLAG MOUNT TO SQUARE STEEL POST 4 CENTER MOUNT TO SQUARE POST 5 FLUSH MOUNT TO WALL

BOLT SIGN PANEL

STAINLESS LIGHT STANDARD/ BETWEEN PICKETS/MESH
STEEL POLE WITH TAMPERPROOF
STRAP FASTENERS

SIGN PANEL OR BACK PANEL

STAINLESS STEEL
(SAME SIZE AND COLOR AS
BRACKET
METAL BRACKET: SIGN PANEL)
ATTACH TO EXISTING MASONRY
WALL WITH CONCRETE ANCHORS ATTACHMENT SIGN PANEL
DEPTH AND SILICONE ADHESIVE SCREWS
DOUBLE SIDED COLOR: GRAY
SIGN PANEL
METAL BRACKET:
ATTACH TO SIGN PANEL
7 CENTER MOUNT TO ROUND POLE 8 FENCE MOUNT
WITH FLUSH HEAD FASTENER
COLOR: GRAY

6 FLAG MOUNT TO MASONRY WALL

SIGN POST
SIGN POST SIGN POST
PAINTED STEEL
FLANGE, WELDED TO POST CONCRETE
COLOR: WHITE POURED
INTO CORED
TAMPERPROOF
HOLE
CONCRETE ANCHORS

EXISTING CONCRETE EXISTING

HARDSCAPE FOOTING TO DEPTH HARDSCAPE
AS REQUIRED

9 HARDSCAPE MOUNTING 10 LANDSCAPE MOUNTING 11 HARDSCAPE MOUNTING

WITH FLANGE CORE AND DRILL

A. CARLOS 04/01/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3340
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-29-20 REVISED DETAILS, DRAWING TITLE & NUMBER AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY SIGN MOUNTING DETAILS B 1 OF 1
A 03-22-17 REVISED DETAIL "1" AC DJM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3340
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:46:57 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_24\ES3340.dgn
 ABBREVIATIONS, LEGEND, AND GENERAL NOTES

ABBREVIATIONS: LEGEND: NOTES:

LIGHT POLE WITH CAMERA / SPEAKER/ LED MESSAGE SIGN 1. CONSTRUCTION SHALL BE IN COMPLIANCE WITH SCRRA, LOCAL, STATE
CAT CATEGORY
AND FEDERAL CODES AND REGULATIONS. IF THERE ARE ANY VARIANCES
CCTV CLOSED CIRCUIT TELEVISION CANOPY
OR CONFLICTS, THE MOST STRINGENT SHALL APPLY.
CIS CUSTOMER INFORMATION SYSTEM
2. CONDUIT SIZES SHOWN AT STUB-OUTS TYPICAL FOR ENTIRE RUN
CS COMMUNICATIONS SHELTER AMBIENT NOISE SENSOR UNLESS NOTED OTHERWISE.
C/F CLOSED CIRCUIT TELEVISION AND FIBER OPTIC
3. ALL CONDUITS SHALL BE PVC MINIMUM 2'-0" BELOW GRADE.
DA DATA ACQUISITION
STROBE LIGHT 4. REFER TO ARCHITECTURAL DRAWINGS FOR LOCATION OF PULL BOXES,
D/T DATA ACQUISITION / TELEPHONE
PRIOR TO ROUGH-IN OF CONDUITS. ARCHITECT SHALL COORDINATE WITH
(E) EXISTING
SPEAKER SIGNAL AND COMMUNICATIONS, AND ELECTRICAL ENGINEER FOR LOCATIONS
EMP EMERGENCY MANAGEMENT PANEL
OF PULLBOXES AS NEEDED.
ET EMERGENCY TELEPHONE
LED LED MESSAGE SIGN 5. PROVIDE 12" SEPARATION BETWEEN POWER AND COMMUNICATION CONDUITS.
FO FIBER OPTIC
6. CONDUITS TO BE STUBBED INTO BOTTOM OF JUNCTION BOX.
FOPP FIBER OPTIC PATCH PANEL
LVM LED VIDEO MONITOR 7. PROVIDE SEPARATE 120 VAC, 20 AMP CIRCUIT TO EACH TVD
HDMI HIGH DEFINITION MULTI-MEDIA INTERFACE
LOCATION. CONDUCTORS TO BE RUN FROM STATION POWER PANEL TO
IC INTERFACE CONVERTER
V VAULT (4' x 4' x 4') EACH TVD LOCATION; SHALL BE XHHW #10 AWG OR #12 AWG
KVM KEYBOARD, VIDEO, MOUSE
SIZED FOR LENGTH OF RUN.
LED LIQUID EMITTING DIODE MESSAGE SIGN
C COMM. PULL BOX (11'' x 17'') 8. PROVIDE 6 FOOT LONG PIGTAIL AT EACH TVD LOCATION TO ALLOW
LVM LIGHT EMITTING DIODE VIDEO MONITOR
CONNECTION OF (3) CONDUCTORS (LINE, NEUTRAL, GROUND) TO
MC MEDIA CONVERTER E ELEC. PULL BOX (11'' x 17'') EQUIPMENT.
MMFO MULTI MODE FIBER OPTIC
9. FOR COMMUNICATIONS SHELTER, SEE COMMUNICATIONS STANDARD DRAWINGS
MTTV MULTI-TRIP TICKET VALIDATOR MACHINE 1 ELEC. PULL BOX (17"L X 11"W X 12"D)
ES9400 THRU ES9440.
NMP NETWORK MEDIA PLAYER
P POWER 2 COMM. PULL BOX (17"L X 11"W X 12"D)

PA PUBLIC ADDRESS
STUB
PC PRIORITY CONTROLLER
PDP POWER DISTRIBUTION PANEL
1'' CONDUIT (1 EA.)
POE POWER OVER ETHERNET
PVC POLYVINYL CHLORIDE CONDUIT
2'' CONDUIT (QTY.)
RJ REGISTERED JACK
RS RECOMMENDED STANDARD 3'' CONDUIT (QTY.)
T TELEPHONE
TDD TELECOMMUNICATION DEVICE FOR THE DEAF 4'' CONDUIT (QTY.)

TVD TICKET VENDING DEVICE

ROW OR INTER-TRACK FENCE
TVSS TRANSIENT VOLTAGE SUPPRESION SYSTEM
UPS UNINTERRUPTIBLE POWER SUPPLY
VAC VOLTS ALTERNATING CURRENT
VMS VIDEO MANAGEMENT SYSTEM

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3400
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
METROLINK STATIONS NTS
1 05-18-20 REVISED ABBREVIATIONS, NOTES AND DRAWING NUMBER AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 07-10-15 REVISED ABBREVIATIONS AND LEGEND AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY ABBREVIATIONS, LEGEND C 1 OF 1
A 09-06-12 REVISED ABBREVIATIONS, LEGEND, NOTES AND TITLE AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 AND GENERAL NOTES CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3400
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:45:36 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_1\ES3400.dgn
 FOR DETAIL
SEE 3402

(4)

E (4) E (4) E (4) E E (4) E (4) E (4) E (4) E (4) E

FIBER VAULT V (4) C (4) C (4) C C (4) C (4) C (4) C (4) C (4) C

PLATFORM
(2)
(4)
(4)

CANOPY
(TYP)
PLATFORM

FIBER VAULT V (4) C (4) C (4) C C (4) C (4) C (4) C (4) C (4) C

E (4) E (4) E (4) E E (4) E (4) E (4) E (4) E (4) E

(6)

(4)
(4)

(2)

(2) E LVM
E
COMM. VAULT
TVD PAD NOTES:
(4) V C 1 2 3 LOCATION
(2)

SEE NOTE 6
1. THIS DRAWING IS A SCHEMATIC OF A TYPICAL METROLINK
(2)

PLATFORM AND IS SHOWN FOR REFERENCE ONLY. LAYOUT

(4)

SEE ES3405 OF PLATFORM MAY VARY.

FOR CONDUIT SIZES
2. ALL TICKET VENDING MACHINES ARE ENERGIZED FROM THE
STATION POWER SOURCE. (SEE ES3405-01 & ES3405-02).
TELCO

3. PUBLIC ADDRESS AND LED MESSAGE SIGNS (PA & LED)

COMMUNICATION ARE ENERGIZED FROM THE COMMUNICATIONS SHELTER.
SHELTER
4. FOR COMMUNICATIONS SHELTER SEE COMMUNICATIONS
STANDARD DRAWINGS ES9400 THRU ES9440.

5. FOR ADDITIONAL NOTES AND LEGEND SEE ES3400.

(1)

6. TVD PAD LOCATION VARIES BY STATION.

7. REFER TO ES3601 FOR CAMERA, SPEAKER AND LED

MESSAGE SIGN LOCATIONS.
COMMERCIAL POWER
ACCESS POINT

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3401
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-29-20 REVISED NOTES AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS

B 07/10/15 REVISED LIGHT POLE SYMBOLS, ADD NOTE 6 AC NDP

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF METROLINK STATION CONDUIT LAYOUT REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY SIDE PLATFORM C 1 OF 2
A 09/07/12 OMIT MTTV, TVM, DVM, REVISE NOTE 1 & TVM PAD AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3401-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:53 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_53\ES3401-01.dgn
 FOR DETAIL
SEE 3402

(4)

FIBER VAULT V (4) C (4) C (4) C (4) C (4) C (4) C (4) C (4) C (4) C

CANOPY
(TYP)
(6)

PLATFORM
(2)

(2) E (4) E (4) E (4) E (4) E (4) E (4) E (4) E (4) E (4) E

(4) V
(4)
(2)

(2)

LVM
E

C 1 2 3
TVD PAD
LOCATION
SEE NOTE 6
NOTES:
SEE ES3405
FOR CONDUIT SIZES 1. THIS DRAWING IS A SCHEMATIC OF A TYPICAL METROLINK
PLATFORM AND IS SHOWN FOR REFERENCE ONLY. LAYOUT
OF PLATFORM MAY VARY.

TELCO 2. ALL TICKET VENDING MACHINES ARE ENERGIZED FROM THE

VAULT STATION POWER SOURCE. (SEE ES3405-01 & ES3405-02)

COMMUNICATIONS
3. PUBLIC ADDRESS AND LED MESSAGE SIGNS (PA & LED)
SHELTER
ARE ENERGIZED FROM THE COMMUNICATIONS SHELTER.

4. FOR COMMUNICATION SHELTER SEE COMMUNICATIONS STANDARD

DRAWINGS ES9400 THRU ES9440.

5. FOR ADDITIONAL NOTES AND LEGEND SEE ES3400.

(1)

6. TVD PAD LOCATION VARIES BY STATION

7. REFER TO ES3601 FOR CAMERA, SPEAKER AND LED

COMMERCIAL POWER MESSAGE SIGN LOCATIONS.
ACCESS POINT

A. CARLOS 07/21/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3401
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-29-20 REVISED NOTES AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS

B 07/10/15 REVISED LIGHT POLE SYMBOLS, ADD NOTE 6 AC NDP

AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF METROLINK STATION CONDUIT LAYOUT REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CENTER PLATFORM C 2 OF 2
A 09/07/12 OMITTED MTTV, TVM, DVM, REVISE NOTE 1 & TVM PAD AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3401-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:58 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_54\ES3401-02.dgn
 COMMUNICATION PULL BOX
17"L x 11"W x 12"D

NOTES:

N.)
-0" (MI
1. ALL CONDUITS SHALL BE RED CONCRETE GROUND LEVEL
PROVIDE RED CAST IN PLACE
ENCASED WITH MINIMUM 3" CONCRETE COVER.
WARNING TAPE CONCRETE PLATFORM
POWER PULL BOX

3'
2. VERTICAL AND HORIZONTAL SEPARATION
BETWEEN CONDUITS SHALL BE A MINIMUM 17"Lx11"Wx12"D
OF 2" CLEAR.
3. CONTRACTOR SHALL ARRANGE THE CONDUIT
3"

AS PER TERRAIN, SOIL AND EXISTING CONDITIONS.

4. SEAL ALL CONDUIT OPENINGS TO PREVENT
SIZE AND QUANTITY MOISTURE FROM ENTERING.
OF CONDUITS AS 5. PROVIDE PREFABRICATED PLASTIC CONDUIT SPACERS
EVERY 5FT TO SUPPORT AND MAINTAIN UNIFORM
2" CLEAR

INDICATED AND/OR
SPACING.
CANOPY BASE NOTES:
REQUIRED
6. CONCRETE FOR CONDUIT PROTECTION SHALL HAVE
CCTV/P 2"C -P 1. LOCATION OF CONDUITS ON THIS DRAWING SHOWN
MINIMUM SLUMP OF 2" AND MAXIMUM OF 4"; LIGHT STANDARD
FOR REFERENCE ONLY. ACTUAL LOCATION OF
CEMENT CONTENT OF 190 POUNDS PER CUBIC FOUNDATION STATION POWER - 2"C -P
4"C SPARE CONDUITS WILL VARY DUE TO SITE SPECIFIC
YARD (2 SACKS); AND WATER REDUCING ADMIXTURE STATION POWER - 2"C -P
2"C C/F CONDITIONS AND TO BE DETERMINED AT THE TIME
ASTMC494 TYPE A.
3"

COMM. SHELTER POWER - 2"C LED/P OF DESIGN.

7. SIX INCHES OF WELL-DAMPENED CONDUIT BEDDING 2"C PA/LED
SHALL BE PLACED OVER THE CONCRETE IN A
2"C-D/T 2. ORIGINATION OF POWER AND COMMUNICATION FEEDS
TRENCH 2 HOURS ATER THE CONCRETE IS POURED.
2"C CCTV TO TVD PAD VARIES BY LOCATION.
3" 3" BACKFILLING OF THE TRENCH EXCAVATION MAY THEN
BE COMPLETED.
AS REQUIRED
3. FOR NOTES AND LEGEND SEE ES3400.

TYPICAL CONDUIT DUCT BANK DETAIL TYPICAL SECTION THRU SINGLE PLATFORM

SPARE 4"C SPARE 4"C

SPARE 4"C SPARE 4"C
SPARE 4"C SPARE SPARE 4"C
4"C
SPARE 4"C SPARE SPARE 4"C
4"C
SPARE 4"C
POWER POWER POWER POWER
SPARE 4"C
PULLBOX PULLBOX PULLBOX PULLBOX

2"C LED/P 2"C 2"C C/F C/F 2"C 2"C LED/P 2"C

2"C CCTV/P 2"C 2"C PA/LED PA/LED 2"C 2"C CCTV/P 2"C

2"C P 2"C 2"C D/T D/T 2"C 2"C LVM/P 2"C

2"C P 2"C 2"C CCTV CCTV 2"C 2"C P 2"C

P
LED/
1"C 1"C 1"C 1"C
COMM COMM
COMM COMM
PULLBOX PULLBOX
PULLBOX PULLBOX
TO SERVICE CABINET
2"C C/F 2"C 2"C C/F 2"C

C
2"C

1"
D
LE
2"C CCTV 2"C 2"C CCTV 2"C

/
A
P
2"C PA/LED 2"C 2"C P P 2"C 2"C PA/LED 2"C
2"C P P 2"C
2"C D/T 2"C 2"C D/T 2"C
2"C LED/P LED/P 2"C

P
P

LVM/P
2"C CCTV/P CCTV/P 2"C

LED/P
LED/P

1"C 1"C

P
1"C
C PA C PA/
C

2"C
LED/P

C /L P C

D/
C

LE

CCTV
1"C
P

T ED T

PA/LED
TV

V V D

T
1"C P
LED/
P
A
/L

1"C LED/P
E
D

1"C 2"C 2"C 1"C 2"C

LED VIDEO
MONITOR
TO COMMUNICATIONS SHELTER
POWER PULL BOX CANOPY BASE
LIGHT POLE COMMS POWER
LIGHT POLE CANOPY
BASE
BASE BASE
TVD PAD
CONDUIT LAYOUT CONDUIT LAYOUT CONDUIT LAYOUT
AT LIGHT POLE AND CANOPY AT EMERGENCY MANAGEMENT PANEL AT TVD PAD

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3402
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
METROLINK STATION NTS
C 05-29-20 TVM REVISED TO TVD AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 04-07-16 ADDED DUCT BANK DETAIL AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CONDUIT LAYOUT DETAILS C 1 OF 2
A 07-10-15 REVISED CONDUIT LAYOUT AT TVM PAD AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 SIDE PLATFORM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3402-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:03 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_55\ES3402-01.dgn
 NOTES: COMMUNICATION PULL BOX
17"L x 11"W x 12"D
NOTES: 1. LOCATION OF CONDUITS ON THIS DRAWING

N.)
SHOWN FOR REFERENCE ONLY. ACTUAL CAST IN PLACE

-0" (MI
1. ALL CONDUITS SHALL BE RED CONCRETE LOCATION OF CONDUITS WILL VARY DUE
PROVIDE RED CONCRETE PLATFORM
ENCASED WITH MINIMUM 3" CONCRETE COVER. TO SITE SPECIFIC CONDITIONS AND TO BE
WARNING TAPE

3'
2. VERTICAL AND HORIZONTAL SEPARATION DETERMINED AT THE TIME OF DESIGN.
BETWEEN CONDUITS SHALL BE A MINIMUM POWER PULL BOX
OF 2" CLEAR. 2. FOR NOTES AND LEGEND SEE ES3400. 17"Lx11"Wx12"D
3. CONTRACTOR SHALL ARRANGE THE CONDUIT
3"

AS PER TERRAIN, SOIL AND EXISTING CONDITIONS.

4. SEAL ALL CONDUIT OPENINGS TO PREVENT
SIZE AND QUANTITY MOISTURE FROM ENTERING.
OF CONDUITS AS 5. PROVIDE PREFABRICATED PLASTIC CONDUIT SPACERS
EVERY 5FT TO SUPPORT AND MAINTAIN UNIFORM
2" CLEAR

INDICATED AND/OR
REQUIRED SPACING.
6. CONCRETE FOR CONDUIT PROTECTION SHALL HAVE
MINIMUM SLUMP OF 2" AND MAXIMUM OF 4"; CCTV/P 2"C
CEMENT CONTENT OF 190 POUNDS PER CUBIC STATION POWER - 2"C
YARD (2 SACKS); AND WATER REDUCING ADMIXTURE 4"C SPARE
STATION POWER - 2"C
ASTMC494 TYPE A.
3"

2"C C/F
7. SIX INCHES OF WELL-DAMPENED CONDUIT BEDDING LED/P 2"C
SHALL BE PLACED OVER THE CONCRETE IN A 2"C PA/LED
TRENCH 2 HOURS ATER THE CONCRETE IS POURED. 2"C D/T
3" 3" BACKFILLING OF THE TRENCH EXCAVATION MAY THEN LIGHT STANDARD
2"C CCTV
BE COMPLETED. FOUNDATION
AS REQUIRED CANOPY
BASE

TYPICAL CONDUIT DUCT BANK DETAIL TYPICAL SECTION THRU CENTER PLATFORM

SPARE 4"C SPARE 4"C SPARE 4"C

SPARE 4"C SPARE 4"C SPARE 4"C
SPARE 4"C SPARE 4"C SPARE 4"C
SPARE 4"C SPARE 4"C SPARE 4"C
COMMUNICATIONS COMMUNICATIONS COMMUNICATIONS COMMUNICATIONS
PULLBOX PULLBOX 2"C C/F C/F 2"C PULLBOX PULLBOX

2"C 2"C C/F 2"C 2"C PA/LED PA/LED 2"C 2"C 2"C C/F 2"C
2"C 2"C CCTV 2"C 2"C 2"C CCTV 2"C
2"C 2"C PA/LED 2"C 2"C D/T D/T 2"C 2"C 2"C PA/LED 2"C
2"C 2"C D/T 2"C 2"C 2"C D/T 2"C
2"C CCTV CCTV 2"C
CC D/PA

ED
PA
TV

LE

V
PA V

D/T
PA/L
TV
D/

LV
CC

CC
1"C

CCT
1"C

/LE

M
1"C
LE

T
D
2"C
TO SERVICE CABINET 1"C POWER
LIGHT POLE CANOPY
BASE

C
BASE 1"C 1"C 2"C LIGHT POLE

D
2 1

1"
LE
BASE LED VIDEO

/
CANOPY MONITOR

A
COMM.

P
2"C P P 2"C BASE

LED/
PO /P

LED ER
LED ER

2"C P P 2"C 1"C TVD PAD

/P

/P
LE
WE

W
W

2"C LED/P LED/P 1"C

/P
D

2"C

PO
PO

2"C

P
M
R

2"C CCTV/P CCTV/P 2"C LV R

1"C WE
PO
1"C
P
2"C 2"C LED/P 2"C 2"C 2"C LED/P 2"C
P
2"C 2"C CCTV/P 2"C LED/ 2"C 2"C CCTV/P 2"C
2"C 2"C POWER 2"C LED/P 2"C 2"C LVM/P 2"C
2"C 2"C POWER 2"C 1"C 2"C 2"C POWER 2"C
2"C
POWER POWER 2"C
POWER POWER
PULLBOX PULLBOX
PULLBOX PULLBOX
TO COMMUNICATIONS SHELTER
POWER PULL BOX

CONDUIT LAYOUT CONDUIT LAYOUT CONDUIT LAYOUT

AT LIGHT POLE AND CANOPY AT EMERGENCY MANAGEMENT PANEL AT TVD PAD

A. CARLOS 07/21/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3402
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-29-20 TVM REVISED TO TVD AC JMM
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES METROLINK STATION REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 04-7-16 ADDED DUCT BANK DETAIL AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CONDUIT LAYOUT DETAILS C 2 OF 2
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 07-10-15 REVISED CONDUIT LAYOUT AT TVM PAD AC NDP
CENTER PLATFORM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3402-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:01 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_56\ES3402-02.dgn
 SPARE 4"C SPARE 4"C

SPARE 4"C SPARE 4"C

SEE NOTE 4 SEE NOTE 4
SPARE 4"C SPARE 4"C

SPARE 4"C SPARE 4"C

NOTE 1

NOTE 1
V
3"C STUB TO 2"C (3)
V PA/LED/DT
FIBER VAULT PA/LED/DT (3) 2"C

TO PLATFORM TO PLATFORM
2"C

(6) 2"C E LED/P

LED/P (1) 3"C
E LED/P

NOTE 2 2"C

LED/P
(3) 2"C
2" C SPARE 4"C

LED/P
2"C
SPARE 4"C
SEE NOTE 4
(1) 3"C COMM. SHELTER SPARE 4"C

SPARE 4"C
EDISON METER PANELS
100 AMP SVS 120/240V NOTE 1
SINGLE PHASE
3"C STUB TO V PA/LED/DT (3) 2"C
FIBER VAULT
NOTE 3 TO PLATFORM

(6) 2"C E
SEE NOTE 5 LED/P
3"C TO
TELCO VAULT NOTE 2 2" C

2"C
COMM. SHELTER
(1) 3"C
4"C

CENTER PLATFORMS
EDISON METER PANELS
100 AMP SVS 120/240V
SINGLE PHASE
NOTE 3

SEE NOTE 5

NOTES: 3"C TO
TELCO VAULT
1. 4'-0" x 4'-0" x 4'-0" DEEP VAULT WITH GALVANIZED COVER.

2. 11" x 17" PULL BOX.

3. SEPARATE METER SERVICE 100 AMP/ 120/ 240V SINGLE PHASE.

SIDE PLATFORMS
4. SPARE CONDUIT TO RUN LENGTH OF PLATFORM AND STUBBED OFF AT END.

5. FOR COMMUNICATIONS SHELTER SEE COMMUNICATIONS STANDARD DRAWINGS

ES9400 THRU ES9440.

6. FOR ADDITIONAL NOTES AND LEGEND SEE ES3400.

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3403
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES SINGLE TENNANT REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY COMMUNICATIONS SHELTER A 1 OF 1
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 09-07-12 REVISED DRAWING TITLE AC NDP
CONDUIT LAYOUT CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3403
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:47:58 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_57\ES3403.dgn
 SPARE 4"C

NOTES: SPARE 4"C

SEE NOTE 4
SPARE 4"C
1. 4'-0" x 4'-0" x 4'-0" DEEP VAULT WITH GALVANIZED COVER.
SPARE 4"C
2. 11" x 17" PULL BOX.

3. SEPARATE METER SERVICE 100 AMP/ 120/ 240V SINGLE PHASE.

4. SPARE CONDUIT TO RUN LENGTH OF PLATFORM AND STUBBED OFF AT END. NOTE 1
V
3"C STUB TO
5. FOR COMMUNICATIONS SHELTER SEE COMMUNICATIONS STANDARD DRAWINGS PA/LED/DT/CCTV (4) 2"C
FIBER VAULT
ES9400 THRU ES9440.
TO PLATFORM
6. EXISTING STATIONS ARE SINGLE TENANT, NEW STATIONS ARE SHARED TENANT

7. FOR ADDITIONAL NOTES AND LEGEND SEE ES3400. (2) 3"C E LED/P 2"C

2"C

(4) 2"C

LED/P
SPARE 4"C SPARE 4"C

SPARE 4"C SPARE 4"C

SEE NOTE 4 SEE NOTE 4
SPARE 4"C SPARE 4"C
NOTE 1
NOTE 1 SPARE 4"C SPARE 4"C

3"C STUB TO 3"C STUB

V PA/LED/DT/CCTV (4) 2"C - (4 TOTAL) V PA/LED/DT/CCTV (4) 2"C
FIBER VAULT TO FIBER VAULT
LED/P
2" C TO PLATFORM TO PLATFORM
CCTV/P

(6) 2"C (6) 2"C E

E 2"C - (4 TOTAL) POWER
LED/P
CCTV
(2) 3"C (2) 3"C 2"C
NOTE 2
NOTE 2
4"C

(4) 2"C
E
E

NOTE 1 NOTE 2

V V

(2) 2"C (2) 2"C

(4) 2"C (4) 2"C

COMM. SHELTER 2"C 2"C

COMM. SHELTER
2"C 2"C
(2) 3"C (2) 3"C

(4) 2"C (4) 2"C EDISON METER PANELS

EDISON METER PANELS 100 AMP SVS 120/240V
100 AMP SVS 120/240V SINGLE PHASE
SINGLE PHASE
NOTE 3 NOTE 3

SEE NOTE 5
SEE NOTE 5

3"C TO 3"C TO
TELCO VAULT TELCO VAULT

SINGLE/CENTER DOUBLE PLATFORM

PLATFORM

A. CARLOS 11/07/08 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3404
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES SHARED TENNANT REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY COMMUNICATIONS SHELTER A 1 OF 1
USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
A 09-07-12 REVISED DRAWING TITLE AC NDP
CONDUIT LAYOUT CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3404
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:01 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_58\ES3404.dgn
 1" C
CANOPY BASE CANOPY BASE
CANOPY BASE

1" C

P P
P

1" C
TDD
1" C

P
1" C
D/T

4
4

ET
LVM

D/T
3 2" C

P
P

1" C
D/T
1" C
TVD 2" C TVD
2" C P
1 3
T

T
2" C

/
D
4 P
E
D/T

C 1" C
1" C

PA/LED
LVM/P

LED/P

CCTV
LVM

D/T
1" C P 2" C

EMP

FOR CONTINUATION OF CONDUIT RUNS

SEE PLATFORM PLAN
AND ES3401 LEGEND & NOTES
1 PULL BOX - 17"L X 11"W X 12"D WITH ELECTRIC
LOGO

2 PULL BOX - 17"L X 11"W X 12" D WITH "COM"

LOGO

3 CHECKERED COVER SIDEWALK JUNCTION BOX

12" X 8" X 6" WITH BARRIER AS INDICATED,
CROUSE HINDS "WJBF120806" OR APPROVED EQUAL

4 CHECKERED COVER SIDEWALK JUNCTION BOX

6" X 4" X 4" DEEP WITH BARRIER AS INDICATED,
CROUSE HINDS "WJBF060404" OR APPROVED EQUAL

INDICATES FRONT FACE OF INSTALLED EQUIPMENT

FOR ADDITIONAL NOTES AND LEGEND SEE ES3400.

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3405
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-29-20 TVM REVISED TO TVD AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF METROLINK STATION REVISION SHEET
B 07-10-15 REMOVED JUNCTION BOX, NOTE 5 AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TVD PAD (COMPLETE CONFIGURATION) C 1 OF 2
A 09-21-12 REVISE TVM DIAGRAM, OMIT MTTV DIAGRAM & NOTES AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3405-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:15 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_59\ES3405-01.dgn
 12" MIN. CLEARANCE TO

NEAREST SIDE
ANY BACK OBSTRUCTION NOTES & LEGEND:
OBSTRUCTION
1 PULL BOX - 17"Lx11"Wx12"D WITH ELECTRIC LOGO
TVD FOOTPRINT
2 PULL BOX - 17"Lx11"Wx12" D WITH "COM" LOGO
1'-6" 3'-0" 3'-6" MIN
NEAREST SIDE
MIN. 3 CHECKERED COVER SIDEWALK JUNCTION BOX 12"x8"x6"
OBSTRUCTION

N.
-0"
4 CHECKERED COVERED SIDEWALK JUNCTION BOX

MI
-6" 1'
6"x4"x4" DEEP WITH BARRIER AS INDICATED, CROUSE
HINDS "WJBF060404" OR APPROVED EQUAL.

-0" 1'

N.
5 FOR ADDITIONAL NOTES AND LEGEND SEE ES3400.

MI
1'
INDICATES FRONT FACE OF EQUIPMENT
(CROUSE HINDS WJBF040404 OR APPROVED EQUAL)
12" MIN., CONCRETE THICKNESS
ENTIRE PAD, AREA UNDER TVD 4'-6" 5'-0"
MIN. HOLD

C TVD C TVD

DETAIL A

D/T-2" C FROM CANOPY BASE

COMM. SHELTER

4
1"C

P
D/T-2" C
LED VIDEO
3
MONITOR
LVM COMMUNICATIONS
2"C SHELTER
P-2" C
3
P
1
2"C D/T BACKBOARD
P TVD
TVD

T
2"C

/
TVD (ADDITIONAL)

D
2"C
E TELCO

PA/LED
2

LVM/P
LED/P

CCTV

LVM

D/T
PULL BOX, 2 ON

P
TVD PAD
TVD CONNECTIONS STUBBED INTO
1"C 2"C
BOTTOM OF PULL - BOXES
12" x 8" x 6"
12" x 8" x 6"
DP JBOX
DP JBOX D/T 2" C

P-2" C (FROM P-PULLBOX)

TVD FOOTPRINT
TVD FOOTPRINT FROM STATION POWER D/T D/T D/T
PANEL

PULL - BOXES ON PLATFORM SEE

PLATFORM PLAN FOR EXACT
LOCATIONS OF PULL - BOXES

A. CARLOS 04/01/03 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3405
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 05-29-20 TVM REVISED TO TVD AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF METROLINK STATION REVISION SHEET
B 07-10-15 REVISE CONDUIT DIAGRAMS, DETAIL "A" AND NOTES AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TVD PAD (MINIMUM CONFIGURATION) C 2 OF 2
A 09-07-12 REVISE CONDUIT DIAGRAMS & DETAIL "A" AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3405-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:08 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_60\ES3405-02.dgn
 CIS FOR EXISTING STATIONS
COMMUNICATION SHELTER

EXISTING
TO BACK OFFICE
ROUTER
SEE ES3501-02
CAT 6 MMFO PATCH
CABLE TO LCD
AMBIENT
NOISE
ETHERNET SWITCH
SENSOR AMBIENT NOISE
SENSOR CABLE

CAT 6

PC / STATION CAT 6
SPEAKERS
CONTROLLER

3.5 mm
AUDIO CABLE

PRIORITY IC ETHERNET
FOPP
CONTROLLER TO RS422/485

SEE ES3501-03

2 WIRE AUDIO

LED MESSAGE SIGN

2 WIRE AUDIO
AUDIO AMPLIFIER

RS422/485

SEE ES3501-04

LED VIDEO 12-STRAND MMFO

MONITOR

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3501
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF CUSTOMER INFORMATION SYSTEM (CIS) REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR EXISTING STATIONS - 1 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3501-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:06 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_61\ES3501-01.dgn
 SPEAKER DIAGRAM

SPEAKER SETUP PER PLATFORM

AMBIENT AMBIENT NOISE SENSOR CABLE

COMMUNICATION
NOISE SHELTER
SENSOR

2 WIRE AUDIO FROM

AUDIO AMPLIFIER
TO NEXT SPEAKERS SPEAKERS SPEAKERS

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3501
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
CUSTOMER INFORMATION SYSTEM (CIS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR EXISTING STATIONS - 2 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 SPEAKER DIAGRAM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3501-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:09 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_62\ES3501-02.dgn
 LED MESSAGE SIGN DIAGRAM
LED SETUP PER PLATFORM

120 VAC FOR RS422/RS485 RS422/485 COMMUNICATION

STROBE INPUT SHELTER

RELAY
CONTACT

RS422/RS485
OUTPUT

RS422/485

120 VAC FOR RS422/RS485

STROBE INPUT

RELAY
CONTACT

RS422/RS485
OUTPUT

RS422/485

TO NEXT LED MESSAGE SIGN

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3501
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
CUSTOMER INFORMATION SYSTEM (CIS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR EXISTING STATIONS - 3 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 LED MESSAGE SIGN DIAGRAM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3501-03
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:20 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_63\ES3501-03.dgn
 LED VIDEO MONITOR DIAGRAM

NMP ETHERNET MC FO TO 12-STRAND MMFO

FOPP
TO HDMI CAT6 ETHERNET MMFO
PATCH
CABLE

HDMI INPUT
HDMI

NMP ETHERNET MC FO TO 12-STRAND MMFO COMMUNICATION

FOPP
TO HDMI ETHERNET MMFO SHELTER
CAT6
PATCH
CABLE

HDMI INPUT
HDMI

12-STRAND MMFO
TO ADDITIONAL LED VIDEO MONITOR

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3501
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
CUSTOMER INFORMATION SYSTEM (CIS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR EXISTING STATIONS - 4 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 LED VIDEO MONITOR DIAGRAM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3501-04
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:36 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_64\ES3501-04.dgn
 CIS FOR NEW STATIONS
COMMUNICATION SHELTER

EXISTING
ROUTER TO BACK OFFICE

SEE ES3502-02
CAT 6

AMBIENT
NOISE
AMBIENT NOISE ETHERNET SWITCH MODULAR MEDIA
SENSOR
SENSOR CABLE WITH SFP CONVERTER

CAT 6

SPEAKERS
PC/STATION MMFO PATCH MMFO PATCH
CONTROLLER CABLE TO LED CABLE TO LED
MESSAGE SIGN VIDEO MONITOR

SPEAKERS 3.5 mm
AUDIO CABLE

PRIORITY AUDIO AUDIO

CONTROLLER AMPLIFIER #1 AMPLIFIER #2 FOPP

2 WIRE AUDIO

SEE ES3502-03

AUDIO PRESENCE 2 WIRE AUDIO

LED MESSAGE SIGN
DETECTOR/SWITCH 2 WIRE AUDIO

2 WIRE AUDIO

12-STRAND MMFO
SEE ES3502-04

LED VIDEO 12-STRAND MMFO

MONITOR

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3502
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF CUSTOMER INFORMATION SYSTEM (CIS) REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR NEW STATIONS - 1 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3502-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:20 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_65\ES3502-01.dgn
 SPEAKER DIAGRAM

SPEAKER SETUP PER STATION

AMBIENT AMBIENT NOISE SENSOR CABLE COMMUNICATION

NOISE
SHELTER
SENSOR

2 WIRE AUDIO FROM

AUDIO AMPLIFIER #1
TO NEXT SPEAKERS SPEAKERS SPEAKERS

2 WIRE AUDIO FROM

AUDIO AMPLIFIER #2
TO NEXT SPEAKERS SPEAKERS SPEAKERS

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3502
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
CUSTOMER INFORMATION SYSTEM (CIS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR NEW STATIONS - 2 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 SPEAKER DIAGRAM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3502-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:21 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_66\ES3502-02.dgn
 LED MESSAGE SIGN DIAGRAM

LED SETUP PER PLATFORM

120 VAC FOR

STROBE
RELAY CONTACT

RJ45 MC FO TO 12-STRAND MMFO COMMUNICATION

FOPP SHELTER
CONNECTION ETHERNET MMFO
PATCH
CABLE

RS422/485
OUTPUT

RS422/485

120 VAC FOR RS422/485

STROBE INPUT
RELAY CONTACT

RS422/RS485
OUTPUT

RS422/485

TO NEXT LED MESSAGE SIGN

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3502
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
CUSTOMER INFORMATION SYSTEM (CIS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR NEW STATIONS - 3 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 LED MESSAGE SIGN DIAGRAM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3502-03
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:20 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_67\ES3502-03.dgn
 LED VIDEO MONITOR DIAGRAM

NMP ETHERNET MC FO TO 12-STRAND MMFO

FOPP
TO HDMI CAT6 ETHERNET MMFO
PATCH
CABLE

HDMI INPUT
HDMI

NMP ETHERNET MC FO TO 12-STRAND MMFO COMMUNICATION

FOPP SHELTER
TO HDMI CAT6 ETHERNET MMFO
PATCH
CABLE

HDMI INPUT
HDMI

12-STRAND MMFO
TO ADDITIONAL LED VIDEO MONITORS

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3502
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
CUSTOMER INFORMATION SYSTEM (CIS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY FOR NEW STATIONS - 4 OF 4
X 00-00-00 REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 LED VIDEO MONITOR DIAGRAM CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ALL RIGHTS RESERVED. ES3502-04
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:42 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_68\ES3502-04.dgn
 15" 2"
SUNSHIELD SUPPORT SEE NOTE 3 MOUNTING PLATE MOUNTING PLATE
BOLT TYP (4)
BOLT TYP (2) SUNSHIELD SUPPORT MOUNTING PLATE
12" 6" SEE NOTE 3 SEE NOTE 3
BOLT TYP (2) BOLT TYP (2)
SUNSHIELD SUPPORT

2"
4"
SEE DRAWING ES3508 (TYP.) BOLT TYP (4)
FOR BRACKET DETAILS
LIGHT POLE
MOUNTING PLATE
SEE DRAWING ES3508 (TYP.)
SEE NOTE 1 & 2 SEE DRAWING ES3508 (TYP.) FOR BRACKET DETAILS
FOR BRACKET DETAILS

SEE NOTE 1 & 2 1" FLEX CONDUIT

SEE NOTE 1 & 2
(TYP)
6"
MOUNTING PLATE
LED

FOPP
2"

LED LED FOPP

1" FLEX CONDUIT FOPP
(TYP)

BOLT TYP (2) BOLT TYP (2)

1" FLEX CONDUIT
BOLT TYP (2) LIGHT POLE
MOUNTING PLATE (TYP)

LED MOUNTING DETAIL TOP VIEW LED MOUNTING DETAIL TOP VIEW LED MOUNTING DETAIL ELEVATION LED MOUNTING DETAIL ELEVATION
(SINGLE SIDED) (DUAL SIDED) (SINGLE SIDED) (DUAL SIDED)

60"
5"
NOTES 44
"
0.
1

"
60

"
1. SUNSHIELD AND STROBE LIGHT ARE NOT SHOWN.

60

6"
2. SUNSHIELD SUPPORT TO BE WELDED TO SUNSHIELD.
SUNSHIELD FRONT VIEW
3. SUNSHIELD SUPPORT NOT SHOWN FOR CLARITY.
5
"
4. DIMENSIONS FOR ALL DETAILS SHALL NOT BE EXCEEDED. DIMENSIONS ARE BASED 21"
ON SIGN MAXIMUM DIMENSIONS OF 55"W x 17"H x 11"D.

5. CONDUIT ENTRY WILL BE SHOWN WHEN COMPONENT PART NUMBERS ARE FINALIZED.
SUNSHIELD 3D VIEW SUNSHIELD SIDE VIEW SUNSHIELD BACK VIEW

1
2"
1" 1'-1" 1'-1" 1"
¼" ¼"
?" DIA.

16"
12"
1

9
3"

13 NOTES:
12"

1"
16"
1

1. BRACKET TO BE MADE FROM ?" THICK SHEET METAL.

8"

2"
7
2

1
2. GRIND ALL SHARP EDGES SMOOTH
3/8" DIA. (TYP.)
3 REQUIRED PLAN
3. POWDER COAT FINISH TO BE GLOSS BLACK

16"
2'-4" A TYP. POWDER COAT FINISH 4. ACTUAL BRACKET DIMENSION TBD PENDING APPROVED

11
LED MODEL
- OPP. (BLACK)
1 1
12" 12"
8"

CK
32"

3"
7

THI
2

ELEVATION A
5/16" RAD. -
TYP. ELEVATON

SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY:SYSTRA/A. CARLOS DATE: 08/12/09
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3503
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF LED MESSAGE SIGN REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MOUNTING DETAILS A 1 OF 1
A 09-28-15 REVISE DRAWING NUMBER AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3503
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:32 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_69\ES3503.dgn
 NOTES:
1. LED VIDEO MONITOR ENCLOSURE AND MOUNTING POST
ASSEMBLY BY I.T.S. ENCLOSURES OR APPROVED EQUAL.

2. MOUNTING POST IS CARBON STEEL WITH A POLYESTER

POWDER PAINT FINISH.

3. ENCLOSURE IS MARINE GRADE ALUMINUM, FORMED AND

REMOVABLE CAP PLATE WELDED, WATER TIGHT, WITH POLYESTER POWDER FINISH.
1
6" 4'-1 2"
4. UNLESS OTHERWISE SPECIFIED, ENCLOSURE AND SUPPORTS
SUN SHIELD
PAINT COLOR WILL BE SILVER.
4'-0"
SUN SHIELD ENCLOSURE

DISPLAY ENCLOSURE

DISPLAY
ENCLOSURE
AIR CONDITIONER

-0"
-4"

11'

-0"
10'

-4"
11'

10'
6" SQUARE
STEEL POST

N.
-8" MI
TO LED VIDEO MONITOR

6'
BASE PLATE &
FOUNDATION SEE
ES3504-02

SAW CUT CONCRETE

PLATFORM AS REQ'D

SAW CUT CONCRETE

PLATFORM AS REQ'D

2-1" CONDUITS REQ'D TO PULLBOX

N.DEPTH
-0"
3'

MI
COMM. PULLBOX
2'-6" DIA. CONCRETE FOUNDATION ISOMETRIC VIEW
11" X 17"
SEE ES3504-02.

ELECTRICAL
PULL BOX
11" x 17"

MONITOR POST DETAIL: SIDE VIEW MONITOR POST DETAIL: FRONT VIEW

A. CARLOS 08/12/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:

E 09-17-20 REVISED NOTES AC JMM

FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3504
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 06-03-16 REVISED DETAILS AC NDP THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 09-28-15 REVISE DRAWING NUMBER AC NDP WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF LED VIDEO MONITOR ASSEMBLY REVISION SHEET
B 07-10-15 REVISE CONTENT, REVISE TITLE AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MOUNTING DETAILS E 1 OF 2
A 09-07-12 REVISE NOTE 2, TVM PAD DIAGRAM AND DRAWING TITLE AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3504-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:42 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_70\ES3504-01.dgn
 NOTES
1. CONDUITS SHALL EXTEND 2" MAXIMUM ABOVE 2'-6" DIA.
FINISHED SURFACE OF FOUNDATION. CONCRETE FOUNDATION
SEE FOUNDATION DETAIL 1'-0" .94 x 1.88 SLOT (4)
2. ANCHOR BOLTS SHALL BE BONDED TO CONDUIT
OR GROUNDING CONDUCTOR.
8"

3. USE FOR METROLINK ENGINEERING STANDARD 3504.

BOLTS

-0"
8"

1'
B O LT S
16"
13
-4
2'
½" x 12" x 12"
¾" DIA X 1'-6" ANCHOR BOLTS THREAD BASE PLATE
CIS-LVM
6", WITH 2 NUTS AND 2 WASHERS EACH.
FOUNDATION
LENGTH DOES NOT INCLUDE 2"
OR 4" 90° BEND, TOTAL 4 2'-0"

BASE PLATE BOLT PATTERN DETAIL

FOUNDATION DETAIL

TO LED VIDEO MONITOR

MAX

BASE PLATE &

THREADED STUB BOLT FOUNDATION
0.5

FINISH GRADE POST

BASE PLATE
N.

È3" MAX
È2" MI

TO PULL BOX

N.DEPTH
EMBEDMENT SAME AS
N.

STANDARD BO LT
-6" MI

-0" M I
1'

3'
ƒ"

DIA.

2'-6" DIA

ANCHOR BOLTS DETAIL CONDUIT STUB-UP DETAIL

SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: HDR / A. CARLOS DATE: 07/10/15
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3504
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 06-03-16 REVISED BASE PLATE BOLT PATTERN DETAIL AC NDP THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 09-28-15 REVISE DRAWING NUMBER AC NDP WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF LED VIDEO MONITOR ASSEMBLY REVISION SHEET
B 07-10-15 REVISE CONTENT, REVISE TITLE AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MOUNTING POST FOUNDATION DETAIL D 2 OF 2
A 09-07-12 REVISE TVM PAD DIAGRAM & DRAWING TITLE AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3504-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:25 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_71\ES3504-02.dgn
 LIGHT POLE

SPEAKER

STROBE

LED MESSAGE SIGN

NOTES:
1. LIGHT POLE SHOWN AS REFERENCE ONLY ACTUAL DESIGN VARIES BY STATION.

2. PLACEMENT OF LED MESSAGE SIGNS, STROBES AND SPEAKERS SHALL BE LOCATED BY THE
CONTRACTOR TO MAXIMIZE VISIBILITY AND SOUND DISTRIBUTION, AND VARIES BY STATION.
THE TOP SIDE OF THE LED SIGN SHALL BE INSTALLED APPROXIMATELY ONE FOOT LOWER
THAN THE SPEAKER.

3. SINGLE OR DOUBLE SIDED LED MESSAGE SIGN AND SPEAKERS AS APPLICABLE.

4. FOR ADDITIONAL PLATFORM INFORMATION NOT SHOWN, SEE DRAWING ES3201

(AS APPLICABLE).

NAL
-0" NOMI
12'

C TRACK

LANDSCAPING

SIDE PLATFORM

A. CARLOS 12/24/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3505
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
LED MESSAGE SIGN NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MOUNTING LOCATION A 1 OF 1
A 09-17-20 REVISED DETAIL AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 SIDE PLATFORMS
REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN
ALL RIGHTS RESERVED. ES3505
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:50 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_72\ES3505.dgn
 LIGHT POLE

NOTES:
SPEAKER
1. LIGHT POLE SHOWN AS REFERENCE ONLY ACTUAL DESIGN VARIES BY STATION.

2. PLACEMENT OF LED MESSAGE SIGN, STROBES AND SPEAKERS SHALL BE LOCATED BY THE
LED MESSAGE SIGN CONTRACTOR TO MAXIMIZE VISIBILITY AND SOUND DISTRIBUTION, AND VARIES BY STATION.
STROBE THE TOP SIDE OF THE LED SIGN SHALL BE INSTALLED APPROXIMATELY ONE FOOT LOWER
THAN THE SPEAKER.

3. SINGLE OR DOUBLE SIDED LED MESSAGE SIGN AND SPEAKERS AS APPLICABLE.

4.FOR ADDITIONAL PLATFORM INFORMATION NOT SHOWN, SEE DRAWING ES3202

(AS APPLICABLE).

NAL
-0" NOMI
12'

C OF PLATFORM

CENTER PLATFORM

A. CARLOS 12/24/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3506
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
LED MESSAGE SIGN NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MOUNTING LOCATION A 1 OF 1
A 09-17-20 REVISED DETAIL AC JMM USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 CENTER PLATFORMS
REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN
ALL RIGHTS RESERVED. ES3506
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:37 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_73\ES3506.dgn
 MATERIALS LIST

EXISTING STATIONS NEW STATIONS

RECOMMENDED RECOMMENDED
ITEM DESCRIPTION MANUFACTURERS MODEL NO. ITEM DESCRIPTION MANUFACTURERS MODEL NO.

1. ETHERNET SWITCH W/SFP HP HP1910 1. ETHERNET SWITCH W/SFP HP HP1910

2. AUDIO AMPLIFIER CROWN CTs 4200 2. AUDIO AMPLIFIER CROWN CTs 4200

3. PRIORITY CONTROLLER BSS AUDIO BLU-50 3. PRIORITY CONTROLLER BSS AUDIO BLU-16

4. 47" COMMERCIAL LED VIDEO MONITOR LG 47WX50MF 4. 47" COMMERCIAL LED VIDEO MONITOR LG 47WX50MF

5. NETWORK MEDIA PLAYER VIEWSONIC NMP-530, VS11681 5. NETWORK MEDIA PLAYER VIEWSONIC NMP-530, VS11681

6. STROBE LIGHT FEDERAL SIGNAL 131DST 6. STROBE LIGHT FEDERAL SIGNAL 131DST

7. AUDIO PRESENCE DETECTOR DAVICOM DAPD-01 7. AUDIO PRESENCE DETECTOR DAVICOM DAPD-01

8. STATION CONTROLLER SUPERLOGICS SL-1U-CTHG1-LA 8. STATION CONTROLLER SUPERLOGICS SL-1U-CTHG1-LA

9. INTERFACE CONVERTER PERLE IOLAN DS1 9. INTERFACE CONVERTER PERLE IOLAN DS1

10. ENVIRONMENTAL DISTRIBUTION CORNING CCH-040 10. ENVIRONMENTAL DISTRIBUTION CORNING CCH-040
CENTER CENTER

11. RACK MOUNT CONNECTOR CORNING CCH-SERIES 11. RACK MOUNT CONNECTOR CORNING CCH-SERIES
HOUSING HOUSING

12. BATTERY EATON INNOVATIVE TECHNOLOGY PW9130N 3000REBM21 12. BATTERY EATON INNOVATIVE TECHNOLOGY PW9130N 3000REBM21

13. UPS EATON INNOVATIVE TECHNOLOGY PW9130 L2000R-XL2US 13. UPS EATON INNOVATIVE TECHNOLOGY PW9130 L2000R-XL2US

14. CLOSET CONNECTOR HOUSING CORNING CCH SERIES 14. CLOSET CONNECTOR HOUSING CORNING CCH SERIES
PIGTAIL MODULES PIGTAIL MODULES

15. SPLICE MODULES CORNING CCH SERIES 15. SPLICE MODULES CORNING CCH SERIES

16. LED VIDEO MONITOR ENCLOSURE (INCLUDING VS-FS-4TLG-SLV 16. LED VIDEO MONITOR ENCLOSURE (INCLUDING VS-FS-4TLG-SLV
47" LED VIDEO MONITOR, INSULATION, CUSTOM MOUNT 47" LED VIDEO MONITOR, INSULATION, CUSTOM MOUNT
ENCLOSURE POST, BRACKETS, MOUNTS, ITS ENCLOSURES STE-02810.9-00 ENCLOSURE POST, BRACKETS, MOUNTS, ITS ENCLOSURES STE-02810.9-00
T20 2000 BTU AIR CONDITIONER/ HEATER), STE-01230.9-00 T20 2000 BTU AIR CONDITIONER/ HEATER), STE-01230.9-00
STAINLESS STEEL MOUNTING POST AND STAINLESS STEEL MOUNTING POST AND
BRACKETS BRACKETS

17. LED MESSAGE SIGNS DAKTRONICS AF-6300-16X9-12-A-S 17. LED MESSAGE SIGNS DAKTRONICS AF-6300-16X9-12-A-S

18. MODULAR MEDIA CONVERTER TRANSITION NETWORKS CPSMC 1810-200 18. MODULAR MEDIA CONVERTER TRANSITION NETWORKS CPSMC 1810-200

19. LED VIDEO MONITOR/MSF SIGNAL FPP CORNING SPH-01P 19. LED VIDEO MONITOR/MSF SIGNAL FPP CORNING SPH-01P

20. LED VIDEO MONITOR/MESSAGE SIGNS TRANSITION NETWORKS SGFEB1014-120 20. LED VIDEO MONITOR/MESSAGE SIGNS TRANSITION NETWORKS SGFEB1014-120
INTERFACE CONVERTER INTERFACE CONVERTER

21. AMBIENT NOISE SENSOR TELEX WP-300 21. AMBIENT NOISE SENSOR TELEX WD-300

A. CARLOS 07/21/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:

E 05-31-17 REVISED DRAWING NUMBER AC LA

FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3507
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
D 09-28-15 REVISED DRAWING NUMBER AC NDP THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
C 07-10-15 REVISED MATERIALS LIST AC NDP WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 12-24-14 REVISED MATERIALS LIST AC NDP
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CIS MATERIALS LIST E 1 OF 1
A 09-21-12 REVISED DRAWING TITLE AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3507
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:57 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_74\ES3507.dgn
 SINGLE CAMERA AT PLATFORM
END (POINTED TOWARDS PLATFORM
CENTER)
SINGLE CAMERA AT PLATFORM
BACK-TO-BACK CAMERAS AT
END (POINTED TOWARDS
MIDDLE OF PLATFORM
PLATFORM CENTER)
(IF NO CANOPIES)

LED MESSAGE SIGN

PA SPEAKERS PA SPEAKERS

STATION
PLATFORM

160'
TYP

DETAIL A: TYPICAL MOUNTING LOCATIONS ON

STATION PLATFORM WITHOUT CANOPIES

SINGLE CAMERA AT PLATFORM

END (POINTED TOWARDS PLATFORM
CENTER) CANOPY
SINGLE CAMERA AT PLATFORM
SINGLE CAMERA IN BETWEEN SEE NOTE 8
END (POINTED TOWARDS
CANOPIES (IF APPLICABLE)
PLATFORM CENTER)

LED MESSAGE SIGN

PA SPEAKERS PA SPEAKERS

STATION
PLATFORM

160'
TYP

DETAIL B: TYPICAL MOUNTING LOCATIONS ON

STATION PLATFORM WITH CANOPIES

NOTES:
1. THIS DRAWING FOR REFERENCE ONLY. PLATFORM LAYOUT VARIES
BY LOCATION.

2. PLATFORM CAMERAS TO BE MOUNTED ON THE SAME PLATFORM

LIGHT FIXTURE AS LED MESSAGE SIGNS AND/OR PA SPEAKERS.

3. PLATFORM CAMERAS TO BE MOUNTED ABOVE PA SPEAKERS, WHEN

APPLICABLE. MOUNT CAMERAS AT A HEIGHT TO MAXIMIZE THE
COVERAGE AREA.

4. SEE DRAWING ES3505 AND ES3506 FOR CIS SIGN AND SPEAKER
MOUNTING DETAILS.

5. ALL PLATFORM CAMERAS SHALL BE OF THE PTZ (PAN-TILT-ZOOM)

TYPE, UNLESS APPROVED OTHERWISE.

6. PLATFORM CAMERA MOUNTING LOCATIONS AND DETAILS TO BE

APPROVED BY SCRRA PRIOR TO INSTALLATION.

7. DUAL CAMERAS SHOWN FOR CLARITY, SINGLE 180/360 DEGREE

CAMERA PREFERRED.

8. ANY CIS EQUIPMENT PROPOSED TO BE MOUNTED ON OR UNDER

THE CANOPY MUST BE APPROVED BY SCRRA. SEE ES3201 AND
ES3202 FOR ADDITIONAL DETAILS.

A. CARLOS 12/24/09 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3601
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
VIDEO SURVEILLANCE SYSTEM (VSS) NTS
C 09-17-20 REVISED ELEVATIONS AND ADDED NOTE 8 AC JMM WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
B 05-31-17 REVISED ELEVATIONS AND NOTE 4 AC LA
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY MOUNTING AND SPACING DETAILS C 1 OF 1
A 09-28-15 REVISE DRAWING NUMBER AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:
ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 (TYPICAL)
REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN
ALL RIGHTS RESERVED. ES3601
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:36 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_75\ES3601.dgn
 LEGEND:
POE POWER OVER ETHERNET
VMS VIDEO MANAGEMENT SYSTEM SCRRA CAMERA

AN T EN N A

AN T EN N A
KVM KEYBOARD-VIDEO-MOUSE ANTENNA
NETWORK WIRELESS
FOPP FIBER OPTIC PATCH PANEL CABLE
SP SURGE PROTECTOR RADIO
MMFO MULTIMODE FIBER OPTIC
SYSTEM

ANTENNA

(1-P O R T )

(1-P O R T )
SP

SP
CABLE
NETWORK VIDEO WIRELESS
POE AGGREGATION POE
RECORDER W/ VMS RADIO POE POE

PO E

PO E
SWITCH SWITCH
SOFTWARE (SERVER) SYSTEM

KVM

C AB LE
CONSOLE

(1-P O R T )

(1-P O R T )
SP

SP
CABLE
POE POE

PO E

PO E
KVM CONSOLE

P AT C H
POE MIDSPAN INJECTOR NEMA
ENCLOSURE
NETWORK ATTACHED (REMOTE CAMERA LOCATION)

M M FO
STORAGE
(IF APPLICABLE)

POE SURGE PROTECTOR MMFO CABLE

FOPP FOPP
(RACK MOUNT)

TELECOMMUNICATIONS ROOM/
MMFO
COMMUNICATIONS SHELTER
PATCH CABLE

(1-P O R T )

(1-P O R T )
SP

SP
POE
POE POE

PO E

PO E
SWITCH
VMS
CLIENT

(1-P O R T )

(1-P O R T )
SP

SP
POE POE

PO E

PO E
NEMA
ENCLOSURE
UP TO 328 FT
POE POE (100m), TYP. (REMOTE CAMERA LOCATION)

GENERAL NOTES:
POE POE UP TO 656 FT
POE POE (200m), TYP. 1. ALL CABLING SHOWN IS CATEGORY 6 (CAT-6) NETWORK CABLE (UNLESS NOTED OTHERWISE).
EXTENDER EXTENDER
2. TOTAL CAT-6 NETWORK CABLE LENGTH FROM NETWORK SWITCH TO POE NETWORK CAMERA
SHALL NOT EXCEED 656 FEET (200m) WITH ONE (1) POE EXTENDER (328 FEET (100m) WITH
NO POE EXTENDER).

3. ONE (1) RJ45 PORT (ON NETWORK SWITCH) PER POE NETWORK CAMERA.

A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3602
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
PRINCIPAL ENGINEER, DESIGN & STANDARDS
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF VIDEO SURVEILLANCE SYSTEM (VSS) REVISION SHEET
B 05-29-20 REVISED LABEL AC JMM
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY TYPICAL NETWORK LINE DIAGRAM B 1 OF 1
A 09-28-15 REVISE DRAWING NUMBER AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3602
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:49:10 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_76\ES3602.dgn
 TRIANGLE INDICATES FIELD
OF VIEW CIRCLE INDICATES FIELD OF VIEW

FIXED CAMERA

PAN-TILT-ZOOM (PTZ) CAMERA

SEMI-CIRCLE INDICATES CIRCLE INDICATES FIELD OF VIEW

FIELD OF VIEW

180 DEGREE CAMERA 360 DEGREE CAMERA

HDR/A. CARLOS 06/30/15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3603
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF VIDEO SURVEILLANCE SYSTEM (VSS) REVISION SHEET

THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY CAMERA FIELD OF VIEW DETAILS A 1 OF 1
A 09-28-15 REVISE DRAWING NUMBER AC NDP USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

REV. DATE DESCRIPTION DES. ENG. ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
ALL RIGHTS RESERVED.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 ES3603
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:42 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_77\ES3603.dgn
 ROUND POLE POLE MOUNTING
CORNER MOUNTING BRACKET
BRACKET
POLE MOUNTING
BRACKET
STAINLESS STEEL
STRAP. TYP.

TOP VIEW
ROUND POLE

SQUARE POLE POLE MOUNTING

POLE
CAMERA BRACKET
ASSEMBLY
(TYP.)

TOP VIEW TOP VIEW

CAMERA
CORNER MOUNTED
TOP VIEW
SIDE VIEW SQUARE POLE

CAMERA
POLE MOUNTED

WALL WALL

GANG BOX

GANG BOX
WALL MOUNTING GANG BOX
BRACKET
CAMERA
ASSEMBLY
(TYP.)

CEILING

NOTES:
CAMERA
CEILING SURFACE MOUNTED 1. THIS DRAWING FOR REFERENCE ONLY. CAMERA TYPE, EQUIPMENT TYPE
SIDE VIEW
AND MOUNTING CONFIGURATION MAY VARY BY LOCATION. CABLING PATHWAY
AND RACEWAY CONFIGURATION MAY VARY BY LOCATION.

2. CAMERA MOUNT, EQUIPMENT MOUNT AND MOUNTING SUPPORT HARDWARE

AS REQUIRED BY MANUFACTURER.

3. ALL SUPPORTING SYSTEM CABLING SHALL BE CONCEALED IN CONDUITS

FROM OUTDOOR ELEMENTS, IF APPLICABLE.

4. CABLING PATHWAY AND RACEWAY ELEMENTS NOT SHOWN (UNLESS SHOWN

CAMERA CAMERA OTHERWISE). CONDUIT SHALL BE FURNISHED AND INSTALLED AS A SYSTEM
WITH ALL REQUIRED FITTINGS, BOXES, TERMINATIONS AND OTHER INSTALLATION
WALL MOUNTED WALL SURFACE MOUNTED ACCESSORIES; ALL IN ACCORDANCE WITH THE SCRRA ENGINEERING STANDARDS,
SIDE VIEW SIDE VIEW MANUFACTURER'S INSTRUCTIONS AND CONTRACT DOCUMENTS.

L. AQUINO 07-22-15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3604
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
VIDEO SURVEILLANCE SYSTEM (VSS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY EQUIPMENT MOUNTING - 1 OF 3
X XX-XX-XX REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 CONFIGURATIONS (TYPICAL)
REV. DATE DESCRIPTION DES. ENG. ALL RIGHTS RESERVED. ES3604-01
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:49:21 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_78\ES3604-01.dgn
 WALL
PARAPET MOUNTING
BRACKET WEATHERPROOF
WEATHERPROOF
ENCLOSURE ENCLOSURE
STAINLESS STEEL
STRAP. TYP.

EXPOSED SURFACE
MOUNTED CONDUIT

POLE
CAMERA
ASSEMBLY,
TYP.

CAMERA
ASSEMBLY,
TYP.

WALL

BASE

HORIZONTAL
FLAT SURFACE WEATHERPROOF ENCLOSURE WEATHERPROOF ENCLOSURE
POLE MOUNTED WALL MOUNTED
SIDE VIEW SIDE VIEW

CAMERA CAMERA
PARAPET MOUNTED WALL SURFACE MOUNTED
SIDE VIEW
EXPOSED CONDUIT
SIDE VIEW

RECESSED
MOUNTING
BRACKET

CEILING

PENDANT MOUNTING
BRACKET

CEILING EXPOSED SURFACE CEILING

MOUNTED CONDUIT

CAMERA CAMERA
CEILING FLUSH MOUNTED CEILING SURFACE MOUNTED
SIDE VIEW
EXPOSED CONDUIT
SIDE VIEW

NOTES:
1. THIS DRAWING FOR REFERENCE ONLY. CAMERA TYPE, EQUIPMENT TYPE 3. ALL SUPPORTING SYSTEM CABLING SHALL BE CONCEALED IN CONDUITS
AND MOUNTING CONFIGURATION MAY VARY BY LOCATION. CABLING PATHWAY FROM OUTDOOR ELEMENTS, IF APPLICABLE.
AND RACEWAY CONFIGURATION MAY VARY BY LOCATION.
4. CABLING PATHWAY AND RACEWAY ELEMENTS NOT SHOWN (UNLESS SHOWN
2. CAMERA MOUNT, EQUIPMENT MOUNT AND MOUNTING SUPPORT HARDWARE OTHERWISE). CONDUIT SHALL BE FURNISHED AND INSTALLED AS A SYSTEM CAMERA
AS REQUIRED BY MANUFACTURER. WITH ALL REQUIRED FITTINGS, BOXES, TERMINATIONS AND OTHER INSTALLATION
ACCESSORIES; ALL IN ACCORDANCE WITH THE SCRRA ENGINEERING STANDARDS, PENDANT MOUNTED
MANUFACTURER'S INSTRUCTIONS AND CONTRACT DOCUMENTS. SIDE VIEW

L. AQUINO 07-22-15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3604
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
VIDEO SURVEILLANCE SYSTEM (VSS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY EQUIPMENT MOUNTING - 2 OF 3
X XX-XX-XX REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 CONFIGURATIONS (TYPICAL)
REV. DATE DESCRIPTION DES. ENG. ALL RIGHTS RESERVED. ES3604-02
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:48:56 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_79\ES3604-02.dgn
 METAL
SUPPORT
METAL GANG BOX
BEAM
SUPPORT
BEAM

GANG BOX NOTES:

EXPOSED SURFACE
MOUNTED CONDUIT
1. STEEL PLATE WELDED TO JOIST AND SIZED SAME AS OUTSIDE CAMERA
OR MOUNTING BRACKET DIMENSION (AT MOUNTING POINT).
½-INCH
HOLE
2. THIS DRAWING FOR REFERENCE ONLY. CAMERA TYPE, EQUIPMENT TYPE
½-INCH AND MOUNTING CONFIGURATION MAY VARY BY LOCATION. CABLING PATHWAY
HOLE AND RACEWAY CONFIGURATION MAY VARY BY LOCATION.

3. CAMERA MOUNT, EQUIPMENT MOUNT AND MOUNTING SUPPORT HARDWARE

AS REQUIRED BY MANUFACTURER.

4. ALL SUPPORTING SYSTEM CABLING SHALL BE CONCEALED IN CONDUITS

CAMERA CABLING CAMERA CABLING FROM OUTDOOR ELEMENTS, IF APPLICABLE.

SEE NOTE 1 5. CABLING PATHWAY AND RACEWAY ELEMENTS NOT SHOWN (UNLESS SHOWN
OTHERWISE). CONDUIT SHALL BE FURNISHED AND INSTALLED AS A SYSTEM
WITH ALL REQUIRED FITTINGS, BOXES, TERMINATIONS AND OTHER INSTALLATION
ACCESSORIES; ALL IN ACCORDANCE WITH THE SCRRA ENGINEERING STANDARDS,
MANUFACTURER'S INSTRUCTIONS AND CONTRACT DOCUMENTS.
SEE NOTE 1

CAMERA
ASSEMBLY,
TYP.

FRONT VIEW SIDE VIEW

CAMERA - CANOPY MOUNTED

(RECTANGULAR BEAM)

METAL
METAL METAL SUPPORT GANG BOX
METAL SUPPORT GANG BOX SUPPORT BEAM
SUPPORT BEAM BEAM
BEAM

GANG BOX EXPOSED SURFACE

GANG BOX EXPOSED SURFACE MOUNTED CONDUIT
MOUNTED CONDUIT
CAMERA
CAMERA CABLING
CABLING

½-INCH
½-INCH HOLE
½-INCH
½-INCH HOLE
HOLE
SEE NOTE 1 HOLE

SEE NOTE 1 SEE NOTE 1

SEE NOTE 1

FRONT VIEW SIDE VIEW

FRONT VIEW SIDE VIEW

CAMERA - CANOPY MOUNTED

CAMERA - CANOPY MOUNTED
(I-BEAM)
(CHANNEL BEAM)
L. AQUINO 07-22-15 SCRRA ENGINEERING STANDARDS ARE INTENDED FOR SCRRA APPROVED USES ONLY. STANDARD
DRAWN BY: DATE:
FOR NON-SCRRA APPROVED USES: ENGINEERING STANDARDS 3604
SCRRA SHALL NOT BE RESPONSIBLE FOR THE ACCURACY OR COMPLETENESS OF
SCALE:
THE DATA OR INFORMATION CONTAINED HEREIN. THE SELECTION AND USE OF THESE
STANDARDS IS THE SOLE RESPONSIBILITY OF THE USER AND SHOULD NOT BE USED
VIDEO SURVEILLANCE SYSTEM (VSS) NTS
PRINCIPAL ENGINEER, DESIGN & STANDARDS WITHOUT CONSULTING A REGISTERED PROFESSIONAL ENGINEER. ALL WARRANTIES
REVISION SHEET
AND REPRESENTATIONS OF ANY KIND ARE DISCLAIMED. ANYONE MAKING USE OF
THIS INFORMATION AGREES THAT IT ASSUMES ALL LIABILITY ARISING FROM SUCH SOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY EQUIPMENT MOUNTING - 3 OF 3
X XX-XX-XX REVISION XX XX USE. NO PART OF THESE STANDARDS SHOULD BE REPRODUCED OR DISTRIBUTED IN CADD FILE:

ASSISTANT DIRECTOR, DESIGN

ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN PERMISSION OF SCRRA.
900 WILSHIRE BLVD., SUITE 1500, L. A., CA. 90017 CONFIGURATIONS (TYPICAL)
REV. DATE DESCRIPTION DES. ENG. ALL RIGHTS RESERVED. ES3604-03
UserName=> scrrapw01app02$ Date Plotted: 1/6/2021 10:49:34 PM Plot Driver=> C:\Program Files (x86)\Common Files\InterPlot\IPLOT\bin\iplotdrvn.plt FileName=> \\scrrapw01app02\iCS_pdf_work_dir\57\489_80\ES3604-03.dgn