0.3-3.

0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Features Functional Block Diagram

0.25 to 3.0 GHz Frequency Range
41 dBm Output IP3 Ground

2.1 dB Noise Figure 4

14.5 dB Gain
23.5 dBm P1dB
SOT-89 SMT Package
Single Power Supply
1 2 3
+3V to +5V Voltage Rail Input Ground Output
Bias

Circuit Description Absolute Maximum Ratings

The CMM6004-SC is a high dynamic range amplifier designed Supply Voltage +6.0 V
for applications operating within the 035 to 3.0 GHz frequency RF Input Power* +20 dBm
range. It is an ideal solution for transmit and receive functions Storage Temperature (Tstg) -55 ºC to +125 ºC
where high linearity is required. The amplifier has the flexibility Junction Temperature 150 ºC
of being optimized for a number of wireless applications. The Operating Temperature -40 ºC to +85ºC
combination of low NF and high IP3 at the same bias point Thermal Resistance 52 ºC/W
Operation of this device above any of these parameters may cause damage.
make it an ideal transmit or receive solution when used in *Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS Typical Parameters
(multichannel multipoint distribution systems) operating from Parameter Typical Units
2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz. Frequency Range 900 1900 2400 MHz
The CMM6004-SC is packaged in a low-cost, space efficient, Gain 16.5 14.5 13.6 dB
surface mount SOT-89 package which provides excellent Input Return Loss -18 -15 -15 dB
Output Return Loss -14 -10 -12 dB
electrical stability and low thermal resistance. All devices are
Output IP3 +41.5 +41.0 +41.0 dBm
100% RF and DC tested.
Output P1dB 23.8 23.5 23.0 dBm
Noise Figure 1.8 2.2 2.3 dB
1. Typical values reflect performance in recommended application circuit.

Electrical Characteristics (T=25ºC)

Unless otherwise specified, the following specifications are guaranteed at room
temperature in a Mimix fixture.
Parameter Condition Min Typ Max Units
Frequency Range 0.3 3.0 GHz
Gain Externally matched 13.5 14.5 dB
Input Return Loss Externally matched -10 dB
Output IP3 +38 +41 dBm
Noise Figure 2.1 dB
Output P1dB 23 dBm
Operating Current Range 120 150 180 mA
Supply Voltage 5.0 V
Notes:
1. T = 25ºC, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 1 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Typical Performance

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 2 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Application Circuit - 900 MHz S-Parameters vs Frequency

Typical Performance (50 Ohm System)
20
5V 3.3V S21

Frequency 900 MHz 900 MHz 10

Gain 16.5 dB 16.2 dB

Magnitude, dB
Input Return Loss -18.0 dB -19.0 dB 0
S11
Output Return Loss -14.0 dB -16.0 dB
OIP3 41.0 dBm 38.0 dBm -10
Noise Figure 1.8 dB 1.8 dB
Drain Current Id = 173 mA Id = 173 mA
-20
P1dB 23.8 dBm 18.5 dBm S22

-30
0.1 1.1 2.1 3.0
Frequency, GHz

CMM6004-SC
RF SOT-89 C2 RF
IN T = 80 mil T = 70 mil T = 500 mil 56 pF OUT

uuuu
uuuu

L1 L2
12 nH 47 nH

INPUT MATCHING Vcc

NETWORK C1 5V
56 pF

Ref Designator Value Description Size

C1, C2 56 pF MCH185A560JK 0603
L1 12 nH TOKO LL1608-F12NK 0603
L2 47 nH TOKO LL1608-F47NK 0603

MIMIX

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 3 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Typical Performance Over Voltage

CMM6004-SC Evaluation board @ 900MHz CMM6004-SC Evaluation board @ 900MHz
S21 Over Voltage S11 Over Voltage
20 30
19
18
17
20
16
15
14
13 10
S21 (dB)

12

S11 (dB)
11
4V
4V
10 3V
0 3V
9 2V
2V
8
7
6 -10

5
4
3
-20
2
1
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 -30
Freq (GHz) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
Freq (GHz)

CMM6004-SC Evaluation board @ 900MHz CCMM6004-SC Evaluation board @ 900MHz

S22 Over Voltage P1dB Over Voltage
20 26

15
24

10

22
5
Power (dBm)
S22 (dB)

0
20
4V
-5 3V
2V
18
-10

-15
16

-20

14
-25

-30
12
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
1.5 2 2.5 3 3.5 4 4.5 5 5.5
Freq (GHz) Voltage (V)

CCMM6004-SC Evaluation board @ 900MHz

OIP3 Over Voltage
50.0

48.0

46.0

44.0

42.0

40.0
OIP3 (dBm)

38.0

36.0

34.0

32.0

30.0

28.0

26.0

24.0

22.0

20.0
1.5 2 2.5 3 3.5 4 4.5 5 5.5
Voltage (V)

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 4 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Distribution Charts @ 3.3V

Idss @ 3.3V Gain @ 3.3V

P1dB @ 3.3V OIP3 @ 3.3V

Note: Sample size is 250 samples taken from 3 different wafer lots.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 5 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Application Circuit - 1900 MHz

S-Parameters vs Frequency
Typical Performance (50 Ohm System) 20
S21
Frequency 1900 MHz
Gain 14.5 dB 10
Input Return Loss -15 dB

Magnitude, dB
Output Return Loss -10 dB 0
S11
OIP3 41.0 dBm
Noise Figure 2.2 dB -10
Bias Vds = 5V, Id = 174 mA
S22
P1dB 23.5 dBm -20

-30
0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency, GHz

CMM6004-SC
RF SOT-89 RF
IN T = 80 mil T = 80 mil T = 70 mil T = 70 mil T = 500 mil OUT

C1 C3

uuuu
uuuu

uuuu

2.2 pF L2 L3 56 pF
L1
2.7 nH 6.8 nH 47 nH

INPUT MATCHING Vcc

C2 5V
NETWORK 56 pF

Ref Designator Value Description Size

C1 2.2 pF KOA 2.2pF 50V CER 0603
CAP 0603 NPO ±.25pF
C2, C3 56 pF MCH185A560JK 0603
L1 2.7 nH TOKO LL1608-F2N7S 0603
L2 6.8 nH TOKO LL1608-F6N8K 0603
L3 47 nH TOKO LL1608-F47NK 0603

MIMIX

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 6 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Application Circuit - 2400 MHz

S-Parameters vs Frequency
Typical Performance (50 Ohm System) 20
S21
Frequency 2400 MHz
10
Gain 13.6 dB
Input Return Loss -15 dB

Magnitude, dB
Output Return Loss -12 dB 0
S11
OIP3 41.0 dBm
Noise Figure 2.3 dB -10
Bias Vds = 5V, Id = 175 mA S22
P1dB 23.0 dBm -20

-30
0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency, GHz

CMM6004-SC
RF SOT-89 RF
IN T = 80 mil T = 80 mil T = 70 mil T = 70 mil T = 500 mil OUT

C1 C3

uuuu
uuuu

uuuu

1.2 pF L2 L3 56 pF
L1
2.2 nH 6.8 nH 47 nH

INPUT MATCHING Vcc

C2 5V
NETWORK 56 pF

Ref Designator Value Description Size

C1 1.2 pF PHYC 1.2pF 50V CER 0603
CAP 0603 NPO ±.25pF
C2, C3 56 pF MCH185A560JK 0603
L1 2.2 nH TOKO LL1608-F2N2S 0603
L2 6.8 nH TOKO LL1608-F6N8K 0603
L3 47 nH TOKO LL1608-F47NK 0603

MIMIX

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 7 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Typical Scattering Parameters

(Vds = +5V, Ids = 150 mA, T = 22ºC, unmatched device in a 50 ohm system)

Frequency S11 S21 S12 S22

(MHz) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang)

300 0.337 -47.270 7.379 157.500 0.066 -3.397 0.067 -164.10

400 0.349 -58.240 7.259 151.400 0.066 -6.123 0.064 -173.50
500 0.363 -68.990 7.127 145.300 0.066 -8.429 0.062 -179.70
600 0.379 -79.290 6.986 139.300 0.066 -10.740 0.060 -173.90
700 0.396 -89.000 6.829 133.300 0.065 -12.900 0.059 -169.10
800 0.413 -98.120 6.666 127.400 0.065 -14.990 0.057 -165.00
900 0.430 -106.700 6.502 121.600 0.065 -16.990 0.055 -161.60
1000 0.447 -114.700 6.330 115.900 0.065 -18.970 0.053 -158.60
1100 0.467 -122.400 6.162 110.300 0.065 -20.840 0.052 -155.50
1200 0.475 -129.600 5.991 104.900 0.065 -22.900 0.049 -152.50
1300 0.490 -136.500 5.820 99.610 0.065 -24.660 0.047 -150.10
1400 0.502 -143.100 5.655 94.400 0.065 -26.510 0.046 -147.00
1500 0.513 -149.400 5.494 89.350 0.064 -28.490 0.044 -144.30
1600 0.524 -155.500 5.339 84.370 0.064 -30.130 0.042 -141.50
1700 0.534 -161.400 5.189 79.490 0.064 -32.120 0.041 -138.80
1800 0.543 -167.100 5.045 74.690 0.064 -34.010 0.040 -136.00
1900 0.551 -172.60 4.906 69.960 0.064 -35.800 0.039 -133.00
2000 0.559 -178.000 4.775 65.320 0.064 -37.620 0.038 -130.00
2100 0.565 176.800 4.647 60.730 0.064 -39.550 0.037 -127.20
2200 0.571 171.500 4.523 56.180 0.064 -41.370 0.037 -124.10
2300 0.577 166.400 4.402 51.720 0.064 -43.200 0.036 -119.80
2400 0.582 161.400 4.289 47.320 0.064 -45.090 0.035 -116.00
2500 0.588 156.500 4.183 42.960 0.064 -46.900 0.036 -111.50
2600 0.539 151.600 4.081 38.610 0.065 -48.790 0.035 -106.20
2700 0.597 146.800 3.983 34.330 0.065 -50.760 0.035 -101.30
2800 0.600 142.000 3.886 30.050 0.065 -52.670 0.036 -95.96
2900 0.605 137.200 3.795 25.810 0.065 -54.540 0.037 -90.92
3000 0.608 132.500 3.706 21.620 0.065 -56.660 0.038 -85.54

S-Parameter Data Files are available online at www.mimixbroadband.com.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 8 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Physical Dimensions

4.50 1.55
[0.177] [0.061]
0.71
1.73 [0.028] 0.38 1.70
[0.068] [0.015] [0.067]

4
3.48
[0.137]
0.41 2.50 4.41
[0.016] 2.06 5.33
[0.096] [0.081] [0.163] [0.210]

0.99
1 2 3 [0.039] 1.27
0.58 [0.050]
0.46 [0.023]
[0.18] 0.86
3X 1.50 0.38
[0.059] [0.015] 0.64 [0.034]
3.00 0.76 [0.025]
[0.118] [0.030] 3.86
DIMENSIONS IN MILLIMETERS
[INCHES] [0.152]

Example:

‘XXXX’ = Part Number

(4 chars max) XXXXP ‘P’ = Plating Option (1 char)
6004G
aaaaaaa ‘aaaaaaa’ = Lot-Wafer Number
(7 chars max) 5010
‘C’ = Country of Origin
(1 char) CYYWW P0701

‘YYWW’ = Date Stamp

(year-year-week-week)

Base Part #: 6004

Lot-Wafer #: 5010
Plating Option: G (matte tin)
Date Code: 2007, week 1
Country of Origin: Philippines

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 9 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
CMM6004-SC

Handling and Assembly Information

CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.

Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.

Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.

Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.

Ordering Information
The CMM6004-SC is available in a surface-mount SOT-89 package and devices are available in tape and reel.
Part Number for Ordering Description
CMM6004-SC-0G00 Matte Tin finished RoHS compliant SOT-89 surface-mount power package in
bulk quantity
CMM6004-SC-0G0T Matte Tin finished RoHS compliant SOT-89 surface-mount power package in
tape and reel
PB-CMM6004-SC-00A0 Evaluation Board with SMA connectors for CMM6004-SC matched at 900 MHz
PB-CMM6004-SC-00B0 Evaluation Board with SMA connectors for CMM6004-SC matched at 1900 MHz
PB-CMM6004-SC-00C0 Evaluation Board with SMA connectors for CMM6004-SC matched at 2400 MHz

We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Page 10 of 10
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.