Distributed by: BEST MATERIALS LLC, Phoenix AZ,

Orignal AJC Hatchets 800-474-7570 www.bestmaterials.com sales@bestmaterials.com AJC Hatchet Accessories

001-ASG27M AJC Adjustable Roofing Hatchet 004-R10 AJC Roofing Hatchet Blades (pkg. of 10)
Includes an adjustable sliding gauge to compensate for Blades are made of finest tempered carbon steel
wear and to match other hatchets exactly. Measures and fit all AJC Hatchets. Perfect for cutting through
metric. Adjustable on both sides from under 4” to over shingles.
5-5/8”. Head Weight: 19oz.
Made in USA Made in USA

002-SG100 AJC Roofing Hatchet

006-ASG AJC Roofing Hatchet Gauges
Stationary screw gauge can be set for 4”, 5”, or 5-5/8”
Gauge for our 001-ASG27 Hatchets. Nut milled to
exposure. Useable with left or right hand.
hold gauge in position. Use pliers to tighten snugly.
Head Weight: 18oz.
Made in USA

002-TSG100 AJC Titanium Roofing Hatchet 007-SG AJC Roofing Hatchet Gauges
Stationary screw gauge can be set for 4”, 5” or 5-5/8” For our 002-SG100 or 003-WSG Hatchet.
exposure. Strong, durable and lightweight to Hardened for long life. Two parts.
reduce arm fatigue. Another first from AJC. Head
weight: 10oz.
Made in USA

003-WSG AJC Wood Shingling Hatchet

Features new magnetic nail starter, thinner
008-BK AJC Blade Keeper
blade and lighter weight. 3 stationary gauge
Hatchet blade keeper and two screws.
positions. Cutting edge is 2-1/8” wide. Head
weight: 16oz.

000-HC AJC Hatchet Claw 009-H AJC Hatchet Handle and Wedges
Triple function tool: Hammer, pry-bar and knife. Highest grade hickory handle with two wood
Features a magnetic nail starter, deep cushion wedges and one metal.
rubber grip and built in blade. Forged and Heat
treated.

Distributed by: BEST MATERIALS LLC

3 Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014
Email: sales@bestmaterials.com www.bestmaterials.com
AJC Seam Rollers AJC Seam Rollers

170-1.75R-W AJC 1-3/4” Silicone Seam Roller 170-0.25S-W AJC 1/4” Steel Seam Roller
Wood handle. 13/4” wide x 13/8” OD roller. Non- Wood handle. Double forks. 1/4” width, 2” OD.
stick rubber. Heat resistant compound. Single Round edge. High quality. Permanently
fork. Permanently sealed and lubricated bearings. sealed and lubricated bearings.

170-2R-TSF AJC 2” Silicone Seam Roller 170-2x1.5S-W AJC 2x1.5” Steel Seam Roller
2” wide x 15/16” OD roller. Unique threaded 5” steel han- Wood handle, single fork. 2” wide x 1.5” OD pol-
dle works for both detail and stand-up operations. ished steel roller. Permanently sealed and lubri-
Deep cushion grip. Non-stick heat resistant rubber. cated bearings.
Shielded bearings.

170-4R-TSF AJC 4” Silicone Seam Roller

170-2x1.5-RADS-W AJC 1.5” O.D. Steel
4” wide x 2” OD roller. Unique threaded 5” steel handle
Radiused Seam Roller
works for both detail and stand-up operations. Deep
2” wide, 1.5” OD radiused roller. Wood handle, sin-
cushion grip. Non-stick heat resistant rubber. Shielded
gle fork. Polished steel. Permanently sealed and
bearings. Also Available: 170-4R-TSF-F60 AJC 4”
lubricated bearings.
Silicone Seam Roller w/60” Fiberglass Handle

170-22x1.5S-W AJC 2x1.5” Double Fork Steel

170-4R-W AJC 4” Silicone Seam Roller
Seam Roller
Wood handle. 4” wide x 2” OD roller. Non-stick, heat resist-
Wood handle, double fork. 2” wide x 1.5” OD pol-
ant rubber compound. Double forks. Shielded bearings.
ished steel roller. Permanently sealed and lubri-
cated bearings.

170-0.5N-W AJC 1/2” Nylon Seam Roller 170-2RADS-TSF AJC 2” Steel Radiused Seam
2” OD x 1/2” wide roller. Wood handle. Roller
Radiused edge won’t cut material. Double forks 2” wide x 2” OD radiused steel roller. 5” steel handle
and sealed and lubricated bearings. is threaded to accept 60” fiberglass handle. Deep
cushion grip. High quality bearings. Use by hand or
standing!

5
AJC Seam Rollers AJC Seam Rollers

170-4S-TSF AJC 4” Steel Seam Roller

170-2S-W AJC 2” Steel Seam Roller
4” wide x 2” OD steel roller. 5” steel handle is threaded
Wood handle, double forks. 2” x2” polished steel
to accept 60” fiberglass handle. Deep cushion grip.
roller. Permanently sealed and lubricated bearings.
High quality bearings. Use by hand or standing!
Also Available: 170-4S-TSF-F60 AJC 4” Steel Seam
Roller w/60” Fiberglass Handle

170-22S-W AJC 2” Single Fork Steel Seam Roller 170-6S-TSF AJC 6” Steel Seam Roller
Wood handle, single fork. 2” x 2” polished steel roller. 6” wide x 2” OD steel roller. 5” handle is thread-
Permanently sealed and lubricated bearings. ed to accept 60” fiberglass handle. Deep cush-
ion grip. High quality bearings. Use by hand or
standing!

170-2S-TSF AJC 2” Steel Seam Roller 170-4NC-W 4” Nylon Cone Roller

2” wide x 2” OD steel roller. 5” steel handle is threaded to Cone end gets into tight spots other rollers
accept 60” fiberglass handle. Deep cushion grip. High can’t. Features heavy duty sealed bearings and
quality bearings. Use by hand or standing! high quality nylon. Wood handle.

170-2RADS-W AJC
170-.23B-W .230” Brass Roller
2” Steel Radiused Seam Roller
High quality 1.060”OD Brass Roller. .230” wide.
Wood handle, single fork. Polished steel 2” wide x 2”
Excellent for detail work and tight spots. Wood
OD radiused roller. Permanently sealed and lubricat-
handle.
ed bearings.

170-4S-W AJC 4” Steel Seam Roller

4” wide x 2” OD steel roller. Wood handle and Distributed by: BEST MATERIALS LLC
double forks. Permanently sealed and lubricat-
Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014
Email: sales@bestmaterials.com www.bestmaterials.com
ed bearings.

7
Commercial Roofing Commercial Roofing

171-SWP AJC New “Super” Weld Probe

Super duty contractor tool for checking seam welds.
170-16S75 75 lb. AJC Heavy Features steel construction and threaded end to accept
Steel Roller extension handle. Deep cushion grip and replaceable
Heavy-duty, contractor 170-16S35 35 lb. AJC Heavy parts.
quality. 3 individual rollers Steel Roller
adjust to irregular surfaces. Heavy-duty, contractor quality.
Removable legs allow unit to 3 individual rollers adjust to
remain standing when not in irregular surfaces. Does not
091-S10 10”
use and aid in transport. come with removable legs.
091-S13 13” AJC Super Duty Bent Shears
Manufactured specifically for commercial roofers. Hot drop
forged from chrome-moly steel. Precision machined and
hardened. Chrome finish resists corrosion. Adjustable screw.
Also Available: 091-330 10” & 091-332 12” Clauss Bent
Shears

143-RT15 15” 091-S10T 10” AJC Super Duty Teflon Coated Bent
143-RT29 29” & Shears
170-16S100 100 lb. AJC 143-COMBO Roofing Same as 091-S10, but features a non-stick Teflon coating
Heavy Steel Roller Torch Kit for easy clean-up.
Heavy-duty, contractor quality. All kits come with wand,
3 individual rollers adjust to regulator, p. gauge, 25’
irregular surfaces. Removable hose, spark lighter and
legs allow unit to remain p.o.l. fitting. Noted for
standing when not in use and durability and efficiency
aid in transport. on the job, these kits Made in USA
excel in balance and
flame control.
143-COMBO is shown.

144-CC AJC Kor-Kutter

Featuring heat treated, chrome-moly alloy steel. Space-saving
removable handles are designed to be stored inside tube. 2"
171-WP AJC Weld Probe Seam Test Tool in diameter. Extracts cores up to 7" deep. Teeth are precision
An idea that was long overdue. Special new design machined and re-sharpenable. High quality tool at a fair price.
allows both standing and close-up work. Accepts stan- Made in the USA by AJC.
dard threaded painters’ extension handles.

9
AJC Shing-Go Tear-off Shovels AJC Magnetic Sweepers

Made in USA 070-RMS ROLLING ORIGINAL AJC MAGNETIC SWEEPER

Powerful magnets, quality workmanship, and a quick release design have
IMPROVED! made the AJC Rolling Magnetic Sweeper a favorite of roofers. Now with a
heavier stainless steel box, stronger wheel brackets, and improved, tool free
Wing-bolts allow fast tool-free
adjustable wheel height. Comes with big 7” diameter wheels and stainless
wheel height adjustment!!
steel magnetic box for easy clean-up. Handle folds over for easy storage.
070-RMS
Length: 30”.

Quick Release Handle

empties directly into trash
Handle Folds Over for
Carrying and Storage

117-SGS (Short)
070-RA AJC ROLLING MAGNETIC
070-RA SWEEPER RAKE ATTACHMENT
115-SGH 115-SGH(R) Highly effective at loosening hidden
nails in grass and gravel. Using the
existing 70-RMS carriage bolt,the rake
115-SGH(S) uses a mounting bracket to attach to
the rolling magnet’s top. Length: 30”.
117-SGS 117-SGS (Red)
117-SGS(S)

The Original AJC® Shing-Go 070-MS AJC Hand Held Magnetic Sweeper
Made in USA
Spring loaded quick release holds in down position. Powerful mag-
nets, stainless steel box. Great for picking up nails on pavement or
in grass. Also good for shop pick up around machines. Saves clean-
Proudly Made in the USA 114-SKID up time and greatly reduces flat tires.
Comes with two nuts & bolts Length: 10”.
AJC’s patented Shing-Go Shovels
feature a 9” replaceable blade, super-tough 116-FTB 070-MR14 14”
D-Grip, plus the balance and feel that 070-MR
070-MR30 30” Magna-Rake™
make them the industry standard for
asphalt shingle tear-offs. The Magna-Rake™ can be used flat side down to clean up nails
116-SGB off concrete and other hard surfaces. With the rake side down it
will reach below the surface of grass, sand, dirt, and wood chips.
Model Description
Aluminum head and fiberglass handle. Permanent magnets.
117-SGS AJC Wood Shing-Go Shovel. Serrated, tempered chrome moly steel blade. 47 1/2” Northern white ash wood handle.
117-SGS(S) AJC Super Shing-Go Shovel. Serrated, tempered chrome moly steel blade. 47 1/2” Top grade fiberglass handle. 070-MM AJC Mini-Magnetic Sweeper
117-SGS(Red) AJC Red Fiberglass Shing-Go Shovel. Serrated, tempered chrome moly steel blade. 47 1/2” Intermediate grade fiberglass handle. Handy for a multitude of jobs such as loading a nail bag, removing
117-SGS(Short) AJC Shorty Shing-Go Shovel. Serrated, tempered chrome moly steel blade. 27 1/2” Northern white ashwood handle. 070-MS nails from gutters, and cleaning metal debris in confined spaces.
115-SGH AJC Wood Replacement Handle. Northern white ash wood handle. Contractor grade thermoplastic D-grip. Fits 117-SGS bodies only. Features a spring-loaded quick release and stainless steel box.
115-SGH(S) AJC Fiberglass Replacement Handle. Heavy duty fiberglass handle. Contractor grade thermoplastic D-grip. Fits 117-SGS(S) bodies only. Diameter: 4”.
115-SGH(R) AJC Red Fiberglass Replacement Handle. Medium grade fiberglass handle. Contractor grade thermoplastic D-grip.
116-SGB AJC Replacement Blade. 9” Serrated, tempered chrome moly heat treated steel. Fits all AJC Shovels. 9” long. 070-SM “The Attractor” Long Handled
114-SKID AJC Shing-Go Skid Plate. Made of chrome moly steel heat treated steel. Fits all AJC Shing-Go Shovels. Comes with 2 nuts & bolts.
Magnetic Retrieving Tool
116-FTB AJC Fork Tooth Replacement Blade. Made from aircraft grade alloy steel. Fits all AJC Shing-Go Shovels using existing hardware.
Used by professionals for construction site clean-up. 41”
070-SM
070-MM overall length allows a no stoop retrieval. Wooden handle.

11 12
AJC Knives AJC Knives

057-MCGA AJC Guardian Angle Knife

Specifically designed for cutting shingles. Comes complete with 57-399 Swing Loading Utility Knife
AJC’s Big Hook, Bowtie, and standard Utility Blade. Features Quick change without a screwdriver. Quick, positive
hand and knuckle protection. Ergonomically superior design lock. Comes with two extra blades. Carded with
reduces fatigue and increases leverage. Uses 102-K54 Knife AJC logo. Uses 031-453R Knife Sheath.
Made in USA Sheath.

057-42080 AJC All Purpose Angle Knife

Angled to keep hand away from work. Especially good with 057-RK3 Roofer’s Knife
our 059-HB5 Hook Blade. Remove cap and spread handle Great for use with our 059-HB5 Hook blade or 059-
apart to change blade. One extra utility blade stored in han- BTB Bowtie Blade. Comes standard with three 059-
dle. Attractively carded with the AJC logo. Uses 102-419 Knife BTB Blades. Uses 031-453R Knife Sheath.
Sheath.

057-LC Dial Lock Knife

087-099A AJC Retractable Utility Knife
Dial lock, heavy duty grip, blade extends out 4”. Also
Retractable blade, red enamel finish utility knife. Button proj-
accepts some saw blades. Large, 1” wide snap off
ects and retracts blade to three positions: Full, half, and one-
style blade.
quarter out. Heavy duty die-cast handle provides blade stor-
059-LCB 10 pack Blades for Dial Lock Knife
age. Carded with AJC logo. Uses 031-453R Knife Sheath.
1” wide HD snap-off blades. (not pictured)

085-199A AJC Heavy-duty Non-Retractable Utility Knife 057-2320 Hyde Black and Silver Roofing Knife
Heavy duty aluminum alloy utility knife. Die-cast in two sec- For cutting roofing and poly iso insulation. Spring
tions provides blade storage. Has handy hang hole. Comes tempered steel blade and ergonomic grip.
with one blade. Carded with AJC logo. Uses 031-453R Knife
Sheath.

057-SC AJC Retractable and 057-SCFIX Fixed “Swift

Change” Knife
No tools required to change blades. Super heavy duty, all Distributed by: BEST MATERIALS LLC
metal, ergonomic handle provides control and comfort. Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014
Holds all standard utility blades -- 1 blade supplied. Carded Email: sales@bestmaterials.com www.bestmaterials.com
with AJC logo. Uses 031-453R Knife Sheath.

13
AJC Blades AJC SuperShear

059-HB5 The Original AJC Big Hook Blade

(5 blades per pack)
Roofers prefer our deep cut, Big Hook blade over any
other. Excellent for any type of roof cut. Fits all stationary
handles and AJC knives. Made from the toughest steel.
Also available: 059-HB100, bulk pack of 100 individual
Made in USA
hook blades.

21” Cut
075-97 AJC Utility Knife Blade(5 blades per pack)
Standard utility knife blade. Fits most knife handles and
retractables. Made from the highest quality steel. Also
available: 075-97100, bulk pack of 100 individual utility
blades.
16 lbs.

AJC Super Shear

059-BTB AJC Bowtie Blade (5 blades per pack) #093-AJCSS. The AJC Super Shear is designed and built in the USA to be the best shingle cutting
Heavy-duty roofing blade has four sharpened edges for
shear on the market. Made from lightweight aluminum, it is extremely effective at cutting a variety
maximum usage. Made from the toughest steel. Fits 57-
of materials, including thick laminate shingles, and even some soft metals. It employs a patent
MCGA and 057-RK3 roofers knife. Also available: 059-
pending spring-loaded shear tension adjustment that allows the user to adjust the amount of con-
BTB100, bulk pack of 100 individual bowtie blades.
tact pressure between the cutting blades for different materials, less pressure for thin/soft and more
pressure for thick/tough. The fence is adjustable to hold shingles for almost any cut. The blades are
made from alloy steel and are replaceable. The anodized finish prevents corrosion and reduces
scratching. Built in scales measure length and roof pitch angles. Attached bracket and rubber feet
provide rooftop stability.
142-285 Sheffield English Hook Blades
(5 blades per pack)
Check out our bottom line pricing on genuine English
hook blades. Also available in boxes of 100. Made in
Sheffield England.

AJC Blades are available in Patent pending Super Shear’s For angle cuts, ...and 1 at bottom
bulk boxes of 100! (Hook, fence adjusts to fence will accom- fence has 1 roof to cut both sides
Utility and Bowtie Blades) multiple locations modate lengthwise pitch gauge at top of hip or valley.
for cross cuts. cuts for almost any of the table...
shingle.

15 16
Slate Tools & Cutters Slate Tools & Cutters

Made in USA 022-AJCSR AJC Shingle/Slate Ripper

New, super heavy duty shingle/slate ripper
for the same price. Ergonomic grip with
extra large striking surfaces on front and
back. Heat treated, forged carbon steel.
Also pictured with Rippers & Bars.

078-WC Wood Batten Cutter

Cuts wood battens for tile slate and metal 111-SCE AJC European Slate Cutter
Made in USA roofing directly on roof, or on ground. Will Cuts and shapes slates up to 5/16” thick.
do angles from 45o to 90o. Stainless steel Progressive cutting action. Designed for
111-AJCSC AJC Slate Cutter blade. Removable square for 90o cuts only. easy mobility.
Does what no other cutter can: Cuts most woods up to 1-1/4” thick x 5”
Straight, convex and concave wide. Weight: 7lbs.
circular Cuts. Cuts slates up to
5/16” thick. Nail Punch is made
from hardened tool steel. Blade
made from Alloy Steel. Made in
USA. Contractor quality, 4.5lbs.

111-SC Slate Cutter

093-SS Shingle Shear
Designed by professional roofers.
111-SH Stortz Slate Hammer Durable aluminum makes the Shingle
Features: Beveled cutting edge on 24”
Used for cutting, punching, and nailing slate. Drop forged and heat Shear very lightweight and easy to han-
arm, hole punch, high quality material,
treated for maximum durability. Features polished finish and sole dle. The Shingle Shear has an inlaid tape
very sturdy. Preferred by craftsmen
leather washer grip. measure and angle guides that make
because they can trim, shape or hole
Weight: 3.8lbs. straight cuts or valley and hip cuts quick
punch slate on the roof or ground. 24”
Length: 25.75” and easy.
x 93/8” base and 8” high. Weight: 8lbs.

111-SCH AJC Hand Held Slate Cutter

111-SS Stortz Slater’s Stake
Shapes slates up to 5/16” thick. Handy nail hole punch.
Straight edge used for cutting and breaking slates to size
Replaceable blade. Can also be used for fiber cement
using slate hammer. Blade length: 25”
and Eternit.

17 18
Metal Roofing Products Metal Roofing Products

078-ORT3 AJC 3”Width Offset Roofing Tong

078-PWH AJC Plastic Wedge Hammer
Drop forged from chrome-vanadium steel, hard-
Round edges and non-marring, impact-resistant
ened and tempered. Cushioned grips. 11/8” throat
polyethylene head. Hickory Handle.
depth, and handy 1/4” graduations.
Made in USA

078-6716 Aviation Snips

Tough moly alloy steel is heat treated to assure
078-SP45 Seaming Pliers, 45° Angle
durability. Best suited for trim cutting soft sheet
Forged, hardened and tempered. Box joint and red
metal, aluminum and copper.
plastisol grip.
078-6716R cuts right.
078-6716L cuts left.
078-6716S cuts straight.

078-6510 Offset Aviation Snips

078-SP90 Seaming Pliers, 90° Angle Tough moly alloy steel is heat treated to assure
Forged with box joint, hardened and tempered. durability. Best suited for trim cutting soft sheet
Red plastisol grip and rounded edges. metal, aluminum and copper.
078-6510R Offset Snip cuts right.
078-6510L Offset Snip cuts left.
078-6510S Offset Snip cuts straight.

078-P6900 Upright
078-SOP Opening Pliers Aviation Snips
For quick and easy opening of standing and double Creates ergonomic wrist and hand posture. 90°
seams. Made from heat treated carbon steel. Red plas- Handle/Blade design makes cutting easier by not
tisol dipped grips. bending the wrist. Unique push or pull cutting motion
reduces cutting time. Great for cutting material in
confined spaces.

078-P77S 7”
078-RT3 AJC 3” Width Roofing Tong 078-P107S 10” &
Forged from chrome-vanadium steel and then hard- 078-P127S 12” Tinner Snips
ened and tempered. Jaws have 1/4” graduations and Tough carbon steel is heat treated to assure strength
throat depth is 11/8”. Vinyl cushion grips. and durability. Blade surfaces are ground smooth
and fully polished.“Kush-n-Kote” durable vinyl plastic
coats handles and bows for user comfort.

19 20
Metal Roofing Products Metal Roofing Products

078-P77D 7”
078-P107D 10” &
078-DRS Double Roofing Seamer
078-P127D 12” Duckbill Snips 5” wide polished working surfaces. Made in
Circular cut for metal work or roofing. Tough carbon Austria from carbon steel. Height left side =
steel is heat treated to assure strength and durability. 11/16” Height right side = 13/8”
“Kush-n-Kote” durable vinyl plastic coats handles and
bows for user comfort.

078-6716-A 3” Long Cut

Blades are hot drop forged of alloy steel for exceptional 078-DEB Drip Edge Bender
strength, durability, and long lasting cutting edge. 11” width. Austrian-made. Can make 90°
Heavy gauge handles will not collapse under pressure. plus bends without marks. Bends flat-seamed
Flip latch keeps blades safely closed when not in use. standing seam round and under drip edge.
Makes straight, wide left and right cuts.

078-1200 Replaceable Blade Snips 078-DES Drip Edge Seamer

Magnesium cast for maximum strength and light 11” width. High quality Austrian-made tool.
weight. 31/2” length of cut. 12” long. Replaceable 31/2” Companion to drip edge bender. Permits
blade made of high carbon steel with hollow ground clean, fast locking of drip edge without tool
edge for superior cutting performance. Blades are easi- marks.
ly replaced using screw driver.

078-53 3” & 078-56 6” Seamer 078-SLS Single Lock Seamer

Jaws are hot drop-forged of carbon steel. Bends and For locking first stage on standing seams.
flattens soft sheet metal up to 22 gauge. Heavy duty Austrian-made quality. For short or long
plastic grips for user comfort. panels. 12” width.
Also available 078-53F Offset Seamer

078-RS Straight RoofingSeamer 078-DLS Double Lock Seamer

43/4” wide working edges. Forged from tool steel in For double lock seams, on short or long pan-
one piece. Austrian-made. Height left side = 15/16” els. 12” width.

21 22
Metal Roofing Products Miscellaneous Products

078-SMC 10” Sheet Metal Clamp Made in USA

Features 3-7/8” wide forged jaws. Heat treated for
durability and nickel plated for corrosion resistance.
Exclusively from AJC
140-SP The Shingle Pad
Reduces scarring & scuffing. Increases productivity.
Reduces back pain & fatigue. Insulates against excessive
roof heat. Patented Product. 2” x 23” x 33.5”
Made in USA 078-HT AJC Hemming Tool
Used on metal roofs to bend the ends at top and Patented
bottom of panels. High quality steel construction.
Available for 5 different profile widths: 11.25,”
15.25,” 17.25,” 20,” & 24.”

078-NMN AJC Nibblex Metal Nibbler

Power drill attachment for cutting metal roofing.
Patented Great for circular and multi-directional cuts.

078-PAT AJC Panel Alignment Tool

Exclusively from AJC. For easier, faster and more accurate
installation of metal roofing panels. Overhang exposure set-
078-SA Scratch Awl tings from 1” to 3.” Squares panel to Roof Eave. Holds panel
Hardened 4” steel blade and hardwood handle. in place while it’s being fastened.

181-2300 Geocel Tripolymer Sealant

245-HR AJC Hand Riveter
Paintable, Mildew Resistant. Can be applied from -40o f to 140o f. Designed for
Sets 1/8”, 3/16” and 5/32” aluminum rivets and 1/8”
flashing, windows and general construction. Asphalt compatible.
stainless steel rivets. Aluminum body and forged
Available in:
handle. Includes 4 nose pieces. Works on most Clear: 181-2300C
blind rivets. White: 181-2300W
Black: 181-2300B
Brown: 181-2300BN

23 24
Miscellaneous Products Miscellaneous Products

012-633 Thorogood® Roofer’s Shoes 032-16R 16oz. & 032-20R 20oz. AJC Rip Claw Hammer
Provides full support and long wear. Combination tan Forged solid steel one piece rip claw hammer. Head material
roughout with smooth brown leather in critical shoe areas. made from high carbon steel. Hardened and tempered.
Full-lace body provides flexibility. Neoprene oil-resistant Precision treated to assure high performance and durability.
rubber crepe outsole. Available in sizes 6 through 14, width
Full polish and super shock absorbent handle.
D and E.

019-4 AJC Nail Stripper

Two row nail strippers are spot welded to last for years. Steel 032-824A1 AJC Single Bit Michigan Axe
loops on each side for neck and straps. Separate models are Single bit fiberglass handle axe. Made from
intended for wood nails or for composition. Right or left handed tough carbon steel. Handle length 36.”
models available. Straps included. Weight 31/2”lbs.
019-4RS - Right Hand Comp 019-4RW - Right Hand Wood
019-4LS - Left Hand Comp 019-4LW - Left Hand Wood

027-BT5 51/2” & 027-BT7 71/2” 040-RF15 15” & 041-RF31 31” Rubber Bungy
AJC Brick/Pointing Trowel Straps
Philadelphia style. Hardened and tempered steel blades. Made for holding down truck tarps. Also handy for
Wood handle for comfortable grip. Available with 51/2” blade securing materials and equipment together. High
(027-BT5) or 71/2” blade (027-BT7). resistance to heat and cold. Strength: 2500lbs. per
Weight: 2.2oz. and 3.1oz. respectively. square inch (tensile strength).

027-MT AJC 5” Margin Trowel

Poly Tarps
For patching and cleaning other tools. One piece high carbon
Durable all purpose utility covers that are light-
steel blades; hardened, tempered and ground. Hardwood
weight, easy to handle, and tough. Rugged woven 5
handles and metal ferrule. 2”x5” Blade. Weight: 2oz. mil laminated polyethylene fabric. Grommeted every
three feet with rope sewn into hem all around for
added strength. Waterproof, mildew proof. Acid,
alkali, and salt resistant. Crack resistant to 20o
Fahrenheit.
Tarp Sizes:
048-M1216 - 12x16ft.
027-RT7 AJC 7” Round Nose Trowel 048-M1620 - 16x20ft.
Rounded blade tip. High carbon steel, hardened and 048-M2030 - 20x30ft.
tempered. Forged shank. Hardwood handle with metal 048-M3040 - 30x40ft.
ferrule. Great price! Weight: 2.6oz. 048-M4060 - 40x60ft.

25 26
AJC Scoops & Shovels Roof Brushes & Handles

113-RS29 29”
AJC Roofer’s Spade 113-F29 29” AJC 122-901 61/2” Masonry Hand Brush
Roofer’s Spade with 29” Spading Fork Made for applying roof coatings and other materials. 4 row
steel handle with D-grip. Reinforced 29” fiber- tampico 3” trim. Designed and constructed for durability.
Head and fulcrum are heat glass handle, forged and Handle size: 5”.
treated for longer life. hardened head and
Weight: 5.4lbs. cushioned thermoplas-
Total Length: 41” tic D-grip. Tine points
are ground off at 300
113-RS48 48” 122-908 1-Knot Roofer’s Brush
angle so no break-in
AJC Roofer’s Spade 122-909 3-Knot Roofer’s Brush
Roofers Spade with 48” period is necessary.
122-910 4-Knot Roofer’s Brush
steel straight handle. Total Length: 40”
Made for applying roof coatings and other materials.
Weight: 6.4lbs. Weight: 3.9lbs.
Tampico fibers, oak hardwood blocks and steel fer-
Total Length: 60” rules. Designed and constructed for durability. 60”
tapered handle sold separately.

055-SR18 AJC Snow Removal 113-AL14 AJC

Roof Rake 122-907TT 7” Tar Brush
Aluminum #14 Scoop Made for applying roof coats and other materials.
Electrically insulated grip for Combines the strength of
safety. Reinforced one-piece Accepts both tapered and threaded handle. Tampico
steel and light weight of alu-
aluminum head (no braces to tapered 21/2” trim. 60” handle sold separately.
minum. Proprietary, patent
assemble, break or replace). pending, chrome-moly skid
Replaceable chrome-moly skid plate is replaceable for long
plates. Folds up for easy stor- service life. 29” fiberglass
age in truck or to hang up in handle with cushion D-grip.
shop. 18’ 4-stage handle. Snap Blade is 143/4” wide x 19” 122-24S 24” Steel Back Squeegee
buttons for quick con- deep.
Weight: 4.4lbs. Steel back with serrated rubber blade. Uses 11/8” tapered
nect/disconnect. Total length: 48” handle, sold separately
Weight: 6.5lbs Also Available: #122-24CS Curved Steel Back Squeegee
122-24WN Wood Back Squeegee
Made in USA Serrated rubber squeegee spreads material evenly. Hardwood
block accepts threaded extension handle. Handle sold separately.

020-RF52 52” Roofer’s Fork 122-16PSB 16” Street Boom

Hand powered shingle ripper. 52” handle with 122-24PSB 24” Street Broom
“D” grip. 4 - 11” angular tines lift and rip shin- Stiff white synthetic street broom.
gles. 1 row of 50mm steel teeth remove nails. 122-W60125TA 60" 11/8”Tapered Wood
Weighs less than 7 lbs. for easy handling. Handle
Sold Separately (not pictured)

27 28
Roofing Brushes & Roller Frames Siding & Gutter Tools

A. 166-ECC AJC End Cap Crimper

A. 122-W60TD60" Threaded Wood Handle Contractor grade crimper. Securely fastens end cap to gutter
B. 122-W60TA 60" Tapered Wood Handle using compound leverage. Adjustable depth. Unique hard-
B.
C. 170-F60 60" Fiberglass Extension Handle ened steel jaws, grade 8 bolts and non-slip vinyl grips. Can
for Seam-Master Roller also be used on sheet metal.
C.

147-CB2 2”
166-DSC AJC Downspout Crimper
147-CB3 3”
Professional quality tool. Downsizes for a water-tight connec-
147-CB4 4” White Bristle Chip Brush
tion. Compound leverage action, hardened steel blades,
Economy quality plain wood handle brush. 2” length and 11/16” in
grade 8 bolts and comfortable vinyl grips.
thickness. Great for a number of applications and priced to sell.
Also available 147-CB4HD 4” Double Thick Chip Brush.

146-RC9 9” Roller Cover 100-GH AJC Seamless Gutter Holders (set of 6)

146-RC4 4” Roller Cover Temporary holders of seamless gutter. Gives you extra
High quality nap cover. Phenolic resin core is solvent resistant. hands when hanging and adjusting long lengths of gut-
Available in 9” (146-RC9) or 4” (146-RC4). Fits our model #145-RF9 ter. Easily removed as gutter is permanently fastened.
#146-RC9.375 (3/8” x 9)
#146-RC9.5 (1/2” x 9) 9” Roller Frame and 145-RF4 4” Roller Frames respectively. Also Plated to prevent corrosion. Now with PVC dipped finish.
available in different nap thickness: Made in USA
#146-RC9.75 (3/4” x 9)

145-RF9 9” Roller Frame

145-RF4” Roller Frame 100-GS1 Gutter Scoop
5-wire cage style, heavy plated rod with steel ferrule at Durable polypropylene scoop. Flexible form lets it con-
threaded grip. Available in 9” (145-RF9) or 4” (145-RF4) form to any size gutter. 4”x16” long.
Cover with our model #146-RC9 9” or our #146-RC4 4”
Roller Covers respectively.

145-ARF18 18” Adjustable Reinforced Aluminum Roller Frame Zinc Plated Steel Hex Screws
Quality product. Great price. Accepts most threaded or tapered Burr-free, hex washer 1/4” slotted head will not strip. 200-
handles. Adjusts from 14” to 20.” 1/4” hex driver accommodates all sizes. Comes in individ-
146-RC18 18” Roller Cover with 3/4” Nap ual bags or bulk boxes. Available in White, Brown, Almond
Solvent resistant. Good Quality. Does not include end caps. Color AND NOW IN STAINLESS STEEL. The best quality
900-145-ARF18 End Cap jobs always use stainless steel screws!
End caps for 146-RC18. Sold by the pair

29 30
Siding Tools & Fasteners Safety Products

Aluminum Pop Rivets

Blind-type rivet with 1/8” x .250 aluminum body and plated steel mandrel. 037-RAK Standard Fall Protection Kit
Available in White or Brown. For professional use only. Kit includes a universal harness, lan-
Pop Rivet Sizes: yard and rope grab, reusable roof anchor, 50’ lifeline and stor-
#250-1/8 x .25WB White 100 pieces #252-1/8 x .25WT White 1000 pieces age bucket. Users must be experienced construction personnel
#251-1/8 x .25BB Brown 100 pieces #253-1/8 x .25BT Brown 1000 pieces and follow all instructions and OSHA Regulations.

200-1/4” x 1-3/4” 200-1/4” x 6” 200-2PB 2”

Magnetic Hex Driver Magnetic Hex Driver Phillips Bit

061-SC Willson® Safety Cap

Shell is high density thermoplastic material. Integrated rain trough.
163-TND Trim Nail Driver
Four- point suspension adjusts to any head size. Meets or exceeds
Secure vinyl and aluminum soffit, fascia and finishing trim.
ANSI specifications. Comes in blue, orange, red or white. Also avail-
Eliminates marring and denting of soft material.
able: 061-SCRA, which features screw type ratchet suspension
adjustment.

077-GT Guard-Tex™ Safety Tape

164-ST AJC “Zipper” Siding Tool Guard-Tex™ safety tape is a natural for roofers and construction work-
For quick, easy removal and installation of vinyl siding. ers. Protects fingers against abrasions and injury while maintaining
Coined edges prevent shaving of material. Foam cushion feel and dexterity. Great for holding band-aids in place. Sticks only to
grip prevents slipping. itself -- nothing else. 3/4” wide x 30 yards long. 16 rolls per bulk
package.
Also available 077-GT1, sold in single shelf packs.

165-VSL Vinyl Siding Snap Lock 092-CT 1000ft.

092-DT 1000ft.
Makes snap lock in cut edge of vinyl siding. Used to CautionTape
Danger Tape
secure panel to trim. Made from hardened and tempered Mark off hazardous
3”x1000’roll.
spring steel. Handy tool. Good quality and low price. areas. 3”x1000’roll.

31 32
Safety Gloves Chalk & Chalk Lines

126-AFG Atlas Type Gloves

051-CL110 Chalk Line
Latex rubber palm coating offering excellent grip and punc-
Tough plastic case is flat on sides. Good chalk capacity. Screw-type
ture resistance. Open back design offers breathability and ven-
filler cap is leak-proof. Long offset winding handle reels in faster.
tilation. Snug and natural fit. Available in medium, large or
Locks quickly and easily. Line on “pop-in” is easily replaced.
extra large. Also available: 126-AFGL Lined Thermal Atlas Fit
Gloves. Insulated for extra warmth.

051-SACL100 “Reel Fast” Chalk Line

126-BJG Brown Jersey Gloves Rewinds 31/2 times faster than regular chalk lines. Large chalk
Brown jersey gloves are clute cut for flexibility, with stretch knit capacity. Locking handle allows use as plumb bob.
wrist for comfort. Large only. Also available: 126-BJGL Lined 051-SRL100 Starrett® Replacement Chalk Line
Brown Jersey Gloves. Insulated for extra warmth. 100ft. line fits most chalk reels. No mess and easy replacement. Not
Pictured.

051-G100 Little Giant Chalk Reel

Little Giant Chalk Reel comes with 100ft. line. Easy grip shovel style han-
126-WG Wonder Gloves dle with rapid rewind and lock. Pull ring and easy fill chalk door. Also
Economy rubber palm coated glove. Open back design for available: 051-G100 Giant Chalk Line Reel. Not Pictured.
breathability. Large only. Great glove at a great price. 051-GRL100 Keson® Little Giant Replacement Line
100ft. replacement line fits Little Giant Chalk Line only. No mess and
easy replacement. Not pictured.

126-HLG Heavy-duty Leather Gloves 051-AL100 AJC Chalk Line

High quality, split leather palm gloves feature a rubberized safety 100ft. line. Contractor grade heavy duty aluminum alloy case with no
cuff, striped cotton back, shirred elastic back and seamless wing mess filling system. Large chalk capacity.
thumb. Large only.

052-C12 Chalk Refill (12 oz. Red, Blue, Yellow or Glo-Orange)

12oz. bottle of chalk. Lays down a hard line that won’t blow away.
126-PVC 12” PVC Gloves
Squeeze top for easy refill. Snap top plastic bottle. Available in red (52-
Fully-coated 12” long PVC Gloves. Lined to insulate heat or cold.
C12R), blue (52-C12B) or glo-orange (052-C12O).
Large only.

33 34
Measuring Tapes Caulking Guns

104-111 1/10 Gallon Caulking Gun

080-C125 AJC 25’ 1” Wide Tape Measure
Uniquely designed for professionals to develop a powerful
Features 8ft. standout and shock absorber to extend blade life.
thrust ratio, making the extrusion of stiff caulks easy and com-
Contractor quality at a competitive price. Uses 016-464 Tape
fortable. Features include hex rod spout cutter, seal puncture
Holder.
tool, ladder hook and thumb release.

104-112D 1/10 Gallon Superior E-Z Thrust Hex Rod Caulker

095-050 AJC 50’ Exclusive Dripless Spring Clip™ Drive caulker designed for
096-100 AJC 100’ Long Steel Tape Measure professionals who require an automatic stop flow mechanism.
50’ and 100’ x 3/8” steel blade with high capacity ABS cases. Sturdy, lightweight construction hex rod caulker. Comes with
built in spout cutter, retractable seal puncture tool, ladder
hook and cartridge retaining bar.

104-188/10 Gallon Super Ratchet Type Caulker

121-SLT100 Roof Pitch Angle Meter Professional quality ratchet type caulking gun.
Fast and accurate pitch/degree measuring. One-handed opera- Recommended for extruding all grades of caulks, sealants and
tion. Magnetic base. adhesives. Features seal puncture tool, spout cutter, no pinch
finger guard, extra deep ratchet teeth, and ladder hook.

104-41001 1/10 Gallon COX Wexford Caulk Gun

080-F100 100' AJC Fiberglass Open Reel Tape Made of high quality, die cast zinc alloy. Corrosion resistant
100” x 1/2” professional quality measure rewinds 3 times faster. epoxy powder finish. Holds standard 10.3 oz. cartridge. Hex
Features high impact ABS case and ergonomic rubber grip. drive rod. Catch plate made of high grade steel. Non-drip
feature.

104-41004 COX 1/10 Gallon COX Chilton Caulk Gun

Wear compensating device doubles gun life. Made of high
quality, die cast zinc alloy. Corrosion resistant epoxy powder
finish. Standard 10.3 oz cartridge.
Also Available: 104-41002 Qt. Chilton Gun.

35 36
Caulking Guns Tool Holders

105-307 1/10 Gallon Superior Ratchet Type Caulker 013-439 Steel Loop Hammer Holder
Industrial grade caulker designed for professionals who Best seller to all tradesman. Heavy leather back for good support.
prefer ratchet guns. Engineered to withstand heavy use. Cradle design loop keeps hammer from pivoting. Riveted for strength. 2-
Equipped with ladder hook, built-in spout cutter, seal 1/2” long belt slots. Top grain leather.
puncture tool and convenient “D” ring and wrist strap.

104-1393 1/10 Gallon AJC Caulking Gun 014-467 (12’ to 16’)

AJC’s best quality caulking gun. For daily heavy duty use. 016-464 (16’ to 25’) Tape Holder
Features a 1/4” square smooth piston rod that rotates for One hand push up design. Safety snap pulls through back if you want it
long life. No drip recoil lock, seal puncture tool and zinc out of the way. Wide belt slots. Top grain leather.
plating. Also available: 105-3403 Quart Caulking Gun. 014-467 fit 12’ to 16’ Tapes.
Made in USA 016-464 fit 16’ to 25’ Tapes.

104-33 1/10 Gallon Economy Ratchet Caulker 028-55 6”

Economy style ratchet type caulking gun. Recommended 029-56 8” &
for light consistency caulks and sealers. 030-57 12” Shear Holders
Made with fine top grain leather. Saddle stitched and riveted

105-105Q 1/4 Gallon Superior E-Z™ Thrust Caulker 031-453R Utility Knife Sheath
E-Z™ Thrusting power smooth rod caulking gun is recom- Best seller to the professional. Accommodates all standard knives. Liner
mended for all grades of caulks, sealants and adhesives. resists blade cut-through. 2-1/2” long belt slots. Top grain leather.
Equipped with built-in spout cutter and seal puncture
tool.

031-453D Double Utility Knife Sheath

Distributed by: BEST MATERIALS LLC Double sheaths for 2 knives. Tunnel belt loop. Top grain leather. Lined to
Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 resist blade cut through.
Email: sales@bestmaterials.com www.bestmaterials.com
Tool Holders Knee Pads

066-DRL9 45O Drill Holster 034-499 Hip Pads

Center-balanced to counter the weight of heavy battery pack. Fits Gives professional users maximum grip for working on roofs.
all brands of 1/4” to 3/8” sized drills. Large opening for easy Molded natural rubber with rough textured surface. Leather leg
access. Nylon stitched and rivet reinforced. 2-1/2” long belt slots. straps. Heavy-duty hardware throughout.
Top-grain leather. 034-499R for right handers. (shown)
034-499L for left handers.

102-419 Plier/Tool Holder 036-318 Heavy-Duty Molded Natural Rubber Knee Pads
Closed-bottom design preferred by many tradesman. Die- Double adjustable leather straps with steel buckles to secure
molded front retains its shape. Nylon stitched and rivet rein- fit. Thick-cushioned rubber for heavy industrial use. Flat bot-
forced. 2-1/4” long belt slots. Top-grain leather. tom design for firm support.

110-5002 Hammer Tacker/Stapler Holster 036-313 Heavy-Duty Leather Knee Pads

Holds most brands of hammer tackers and staplers. Double layer Designed for heavy, professional applications. Comfortable 1/2”
of rugged lightweight DuPont Cordura® Plus Naturelle™ fabric. thick water repellant felt lining for extra comfort. Top-grain
cowhide outer shell with adjustable straps and steel buckles.

102-K54 Guardian Angle Knife Sheath

036-309 Ultra Light Knee Pads
Made exclusively for our 057-MCGA Guardian Angle knife, but will
Space-age design features non-skid shell and quick fasten rub-
also accommodate some larger knives and tools. Fiber liner resists
ber straps.
blade cut-through. 2-1/2” long belt slots. Top-grain leather.

036-310 Molded Rubber Natural Knee Pads & 112-340

Velcro Knee Pads
102-1360 Snip Sheath with Steel Loop Holder Lightweight, yet durable enough for the trades. Medium-
Holds a hammer and snips. Top-grain leather. Tunnel belt loop. priced. Popular with professionals.
036-310 comes with adjustable web straps with slide buckles.
112-340 has same features as 036-310, but with velcro straps
for easy on/off use.
Tool Belts & Aprons Tool Pouches

035-502 & 045-501 21/4 ” Heavy-Duty Web Work Belt

Good-selling, economical, army-style, for use with all tool 011-496 2-Pocket Roofer’s Nail Bag
pouches and nail bags. Fits waist sizes 29” to 46.” Heavy-duty Belt-level bag prevents dragging while working in bent position.
plated hardware. Nylon-stitched and rivet reinforced. Top-grain American leather.
045-501 Cotton web belt for maximum comfort.
035-502 Features snaps to secure 034-499 Roofer’s Hip Pad.

046-960 23/4” Wide Embossed Roller Buckle Belt 015-454R Roofer’s Bag with Belt High Loop
Heavy-duty design gives good back support for carrying Big, rugged bag with 8” x 9” nail pocket. Belt high tunnel loop
heavy loads. Steel roller buckle belt for strength. Cuts off prevents bag from dragging on roof when kneeling or sitting.
to fit size 29” to 46.” Top-grain leather. Pocket hangs at belt level. Made of 51/2 oz. heavy extra-soft, top
grain American leather.

024-424 10-Pocket, Large Capacity Nail & Tool Bag

072-416X 11/2” Wide Dress Work Belt Multi-pocket design for multiple jobs. 3 main nail pockets, 7
Used for tool pouches, bags, and as semi-dress belt. pockets for tools, pencils, etc..., 16’ - 30’ leather measuring tape
Fits waists 29” to 46.” Cuts off to size. Made from top- holder. Leather hammer holder. Double, nylon-stitched and
grain cowhide. rivet reinforced. Top-grain American leather.

039-427 12 Pocket Construction Worker’s Apron

Standard size, best selling work apron. Includes 4 main 038-483 2-Pocket Standard Nail Bag
pockets for nails and tools. Holders for 16’ to 30’ meas- Best seller to the professional construction worker. Extra capaci-
uring tape, pencils, tools, hammers, combination ty for the framer or carpenter. Nylon-stitched and rivet rein-
squares, etc. 21/4” poly web belt fits waist sizes 29” to forced. Top-grain American leather.
46.” Double nylon stitched and riveted for reinforce-
ment. Top-grain American leather.

103-FOR Foreman Apron 043-423 5-Pocket Carpenter’s Nail & Tool Bag
Top of the line pocket apron exclusive to AJC. Top selling construction worker’s pouch. Top grain American
Constructed of top-grain cowhide. Two extra hang leather. 2 main nail pockets, 3 pockets for tools, pencils, etc...,
pockets. Steel hammer loop. Has a place for knife leather hammer loop. Tunnel belt loop for up to 23/4” wide belts.
sheath and place to hang keys. Deluxe 2” wide leather Double, nylon-stitched and rivet reinforced. Available for right
belt. handers (043-423R) or left handers (044-423L).
Ladder Products AJC Pry Bars & Rippers

060-LH Ladder Hooks (pair) 084-DB Demoliton Bully

Easily clamp a pair of ladder hooks to a single wood, aluminum, or 22” overall. Features teeth
fiberglass ladder. Clamps to top two rungs. Has rollers so ladder 084-MB AJC Mighty Bar at the front and back of
can be readily placed in position. Fits most standard rungs up to AJC’s 13” long pry bar has a wider end blade. Hammering block.
13/4.” Weight: 9.5lbs per pair. designed for loosening shingles, flashings, Heavy steel construction.
prying and lifting. Forged from heavy-
gauge tempered carbon steel.

083-LM Nev•R•Mark Ladder Mitts

Prevents dents and scratches on aluminum and other types of sid-
084-NP AJC Nail Puller 084-WB AJC Wrecking Bar
ing. Makes ladder movement easy. Fits all standard ladders.
Nail puller features 90o offset extracting claw. Made from super-tough carbon steel.
5/8” hexagonal stock. 12” long. Gooseneck fully painted. 3/4” stock.
24” long. Weight: 3.3lbs.

067-HH Folding Horse (pair) 050-DC AJC Roof Edge Trimmer Made in USA
Top of the line heavy-duty horse. Lightweight, flexible design. For trimming off edges of old roofs before recovering.
Adjusts to uneven surfaces. Folds compactly for storage. Comes Start at top and trim off both sides. Comes with two
completely assembled. blades.
Folded size: 8”x31”x61/8”. 053-ET2 Roof Edge Trimmer Blades
Replacement blades for the 50-DC Edge Trimmer. Two per
Extended: 231/2”x31”x281/8”.
package.

064-LSO Ladder Stand-off 084-3SD 3” &

Adjusts to hold ladder from 21” to 28” away from building and on 084-7SD 7” Steel Spud Scraper Bar
corners. Made to give a lifetime of service. Adjusts to any ladder Designed to spud gravel off of roofs. Heavy duty
angle. with “D” handle grip. 3” or 7” replaceable blade.
Weight: 8.75lbs. Handle: 56” long. Weight: 8lbs.
Replacement Blades available:
084-3SB 3” Replacement Blade.
084-7SB 7” Replacement Blade.

084-3K 3” & 084-6K 61/2” Roofer’s Steel Tooth

098-WLJ Ladder Jacks (pair) Tear-off/ Spud Bar
Model 10-20-02 accepts planks 12” and 14”, stages 20” width. Spans 3 Will remove old roofing material while pulling up
rungs and attaches to 2. Fits round or flat step rungs. Mounts on nails. Heavy duty, hand welded. Beveled tip can
inner or outer front ladder faces. Lightweight, sturdy, easy to use. easily be resharpened. Available with 3” or 61/2”
Fast adjustments, locks into position. width. Handle: 56” long.
Weight: 8.4lbs each. Weight: 10lbs.
AJC Roof Brackets AJC Roof Brackets

068-ARB Adjustable Roof Bracket

065-RB2x6 Roof Bracket
Designed for 6/12 up to and including 14/12 pitch. Comes
Holds plank at 45o angle for up to and including a 12/12
with 7” or 9” plank space. Adjusts 35o to 60o. Simply remove
pitch. Easy on/off installation.
insert for 9” space. Double heavy-duty links
Weight: 2.2lbs. each
fold for storage.
Weight: 2.9lbs. each

099-RB6 Roof Bracket 068-J12 6” Slater’s Bracket

Holds 2x6 plank at 90o to roof. Removes and installs quickly. Holds 2x12 Plank. 6 adjustable positions to fit 33o to
Weight: 2.2lbs. each 55o angle. Folds compactly for storage.
Weight: 8lbs. each

065-RB2x8+10 Roof Bracket 099-RB4 Roof Bracket

Holds plank at 45o angle for up to and including a 12/12 Holds 2x4 plank at 90o to roof. Same easy installation
pitch. Made for using 2x8 or 2x10 planks. Simply remove and removal.
insert for 2x10 use. Weight: 1.8lbs. each
Weight: 3lbs. each

! WARNING
065-60-2x6 Roof Bracket
Holds 2x6 plank at 600 angle for up to and including a 16/12
pitch.
Weight: 2.2lbs. each
Yo u mu s t we ar f a l l p ro tec t io n at al l t i mes. Fail u re to
rea d an d fo ll ow c ri ti c a l wa rn in g s and i ns tru c ti o ns for
b ra cket i n s t a l lat i o n a n d us e c an re s u lt i n s eri ous p er-
s o n al i nj u r y o r d eat h f rom f a l l in g. Us e in st ri c t com-
Distributed by: BEST MATERIALS LLC
Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 p l ia n ce w i th l o c al, st ate, fed e ra l O SH A and o th er reg-
Email: sales@bestmaterials.com www.bestmaterials.com
u l at io ns. SAFET Y FIRST

46
Product Index/Company Information AJC Fiber Cement Cutters
Distributed by: BEST MATERIALS LLC
Product Index Product Warranty

Angle Meter Page 35 All AJC Products carry a lifetime guarantee against defects in material and 162-CSC AJC Fiber Cement Siding Cutter
Axes Page 26 workmanship. Any product that is defective in material or workmanship will Fast, easy and safe cutting of most leading
Bent Shears Page 10 be replaced at no charge. Dealers may request credit for defective items in brands of fiber cement siding. High quality, con-
Blades Page 15 lieu of replacement. Only merchandise credits will be granted, no cash tractor grade tool. Guillotine action reduces dust
Brushes Page 28-29 1
/ ”
Bungy Straps Page 26
refunds will be made for return of items under warranty. propagation. Maximum siding width: 8 4
Caulk Guns Page 36-37 Maximum Thickness: /16”
5
Patented
Chalk & Chalk Lines Page 34 AJC relies on its dealers to determine if a tool qualifies for replacement. In
Claw Hammers Page 26 order to receive credit or to obtain a replacement, please call and AJC will
Fall Protection Kits Page 32 issue a call tag for the defective item.
Fasteners Page 30-31
Fiber Cement Cutters Page 2 This guarantee does not apply to tools that have been abused or used for
Folding Saw Horses Page 43 purposes for which they are not intended. Also, this guarantee does not
Geocel Page 24 guard against the effects of normal wear. 162-MCSC AJC Mega Fiber Cement Siding
Gloves Page 33
Gutter & Downspout Tools Page 30 Cutter
Shipping Charges Will cut 12” wide planks (at 900). Hardened blade
Hammers Page 26
Heavy Steel Rollers Page 9 with gussett reinforcement. Cuts up to 5/16” thick
Knee Pads Page 40 Freight will be paid on orders for 120 or more AJC Hatchets, 72 or more AJC
Shing-Go shovels, or any order over $2000. All other orders will be shipped material. Contractor quality.
Knives Page 13-14
FOB Hudson, Ohio (prepaid with shipping added to invoice). All prepaid Weight 15lbs.
Kor-Kutter Page 10 Patented
Ladder Products Page 43 orders must be shipped to a single location. AJC reserves the right to add
Magnetic Sweepers Page 12 freight charges back to any invoice over 30 days past due.
Metal Working Tools Page 19-23
Nail Strippers Page 25 Shipping Shortages or Product Damaged in Transit
Panel Alignment Tool Page 24
Promotional Items Page 47-48
Shipping shortages or products damaged in transit must be reported
Rippers & Bars Page 44
immediately. AJC will verify and correct reported shortages or damages as
Roller Covers Page 29
quickly as possible. At AJC’s discretion, either replacement product or
162-VCSC AJC Angle Fiber Cement Siding
Roller Frames Page 29
authorization to short pay an invoice will be provided for valid claims. If any Cutter
Roofer’s Forks Page 27
Roofer’s Scoops Page 27 damages occur in transit, please keep the original packaging for inspection. Maximum siding width: 12.” Cuts fiber cement sid-
Roofer’s Spades Page 27 Unauthorized deductions will not be honored. ing up to 5/16” maximum thickness. Neat and clean Patented
Roofing Brackets Page 45-46 cut. Reduces dust while cutting. Removable Insert
Roofing Hatchets Page 3-4 Terms of Sale for 8” or 12” Plank. Cuts angles from 900 to 400.
t

Roofing Shoes Page 25

Roofing Snow Rakes Page 27 Weight 21lbs.
Standard terms of sale are 1 % net 30 days. If invoice discounts are granted,
Roofing Torches Page 9
then they apply only to the product total. Freight charges cannot be dis-
Rubber Straps Page 26
Safety Products Page 32 counted. AJC reserves the right to charge interest on any past due balance.
Seam Rollers Page 5-8 Interest will be charged at a rate of 1 1/2 % per month or the maximum
Shing-Go Shovels Page 11 allowable. Interest charges will accrue beginning on the day following the
Shingle Pad Page 24 invoice due date. AJC reserves the right to bill customer for previously pre-
Shingle Shear Page 18 paid freight charges on balances over 30 days past due.
Siding Tools Page 30-31 162-CR AJC Croco-Cut Fiber Cement Siding
Slate Rippers Page 17 Company Contact Information Cutter
Slate Tools Page 17-18 Orders can be placed by phone (between 8am and 5pm Eastern Standard Hand held Fiber Cement Cutter. High quality hand
Squeegees Page 28 Time) at 1-800-428-2438. A 24 hour fax line is available at 1-888-252-3291.
Super Shear Page 16 cutter for detail work. Cuts straight and arcs. For
Any remittance, questions or comments can be mailed to:
Tape Measures Page 35 5/16” Fiber Cement. Hardened alloy tool steel.
Tarps Page 26
Tool Belts & Aprons Page 41 AJC Tools & Equipment Co.
Tool Holders Page 38-39 5145 Hudson Dr.
Tool Pouches Page 42 Hudson, OH 44236
Trowels Page 25 email: info@ajctools.com

1 1-800-428-2438 | Toll Free Fax: 1-888-252-3291 | www.ajctools.com