*Please refer to the product specifications for details.
Jul-2017/Rev.01
Electric Feeder Series Contribution to Stable High-quality Production
■RFseries*1Specifications NEW
■RFseries*1 NEW ■EFseries（Single Lane） Model No. Pitch Tape size occupied pins(12mm) *2 occupied pins(17mm) *3
ＲＦ０８ＡＳ １/２/４ ８㎜ 1 1
ＲＦ１２ＡＳ ２/４/８/１２ １２㎜ 2 1
ＲＦ１６ＡＳ ４/８/１２/１６ １６㎜ 2 2
ＲＦ２４ＡＳ ４/８/１２/１６/２０/２４ ２４㎜ 3 2
ＲＦ３２ＡＳ ４/８/１２/１６/２０/２４/２８/３２ ３２㎜ 4 3
ＲＦ４４ＡＳ ４/８/１２/１６/２０/２４/２８/３２/３６/４０/４４ ４４㎜ 5 3
ＲＦ５６ＡＳ ４/８/１２/１６/２０/２４/２８/３２/３６/４０/４４/４８/５２/５６ ５６㎜ 6 4
RF08AS EF08HSR *1 Only applicable RS-1,RX-7,KE-3000 series.
*2 In case RS-1,RX-7
*3 In case RX-6,KE-3000 series
The new RF Series feeders are smaller and lighter than Motor drive provides smoother, higher speed presenta-
previous EF feeder models while maintaining high tion. Models include sizes from 8-88mm for a wide
accuracy. The smaller size allows more feeders to fit range of components. Automatic pick position correc-
on the machine, imrpving productivity and flexibility.*2 tion for improved pick accuracy is standard on all
EFseries feeders. ■EFseries* Specifications
*1 Only available RS-1,RX-7,KE-3000 series.
*2 When using RX-7 Model No. Pitch Tape size occupied slots
ＥＦ０２ＨＳＲ ２ ８㎜（０４０２chip/０６０３chip/１００５chip） 1
ＥＦ０８ＨＳＲ ２/４ ８㎜ 1
■EFseries（Dual Lane) ■Stick Feeder
ＥＦ０８ＨＤＲ ２/４ ８㎜ 1
ＥＦ１２ＦＳＲ ４∼１２ １２㎜ 1
ＥＦ１６ＦＳＲ ４∼１６ １６㎜ 2
ＥＦ２４ＦＳＲ ４∼２４ ２４㎜ 2
ＥＦ３２ＦＳＲ ４∼３２ ３２㎜ 3
ＥＦ４４ＦＳ ４∼４４ ４４㎜ 3
ＥＦ５６ＦＳ ４∼５６ ５６㎜ 4
ＥＦ７２ＦＳ ４∼５６ ７２㎜ 5
ＥＦ８８ＦＳ ４∼５６ ８８㎜ 6
* When using the EF series feeder (excluding EF72FS, EF88FS) in the RF bank, a separate attachment is required.
Please consult our sales staff if you use EF72FS, EF88FS in RF Bank.
EF08HDR SFN0EB
The dual-lane electronic feeder holds two 8mm reels in Electronic belt-driven stick feeders provide reliable, ■Stick Feeder Specifications
the space of a single 17mm feeder, doubling the high speed component presentation. Adjustable lane
Feeder Lane width SOP SOJ PLCC(QFJ)
component capacity of the machine. Higher capacity width provides greater flexibility for a variety of
type Model No. （㎜） nominal size（mil） W（㎜） Ｔ（㎜） nominal size（mil） W（㎜） Ｔ（㎜） nominal size（mil） W(㎜） Ｔ(㎜）
provides greater flexibility for clustering a variety of components and reduces the need for dedicated
∼1.5
*1
PCBs and reduces the need for additional machines. feeders. Type N0 SFN0EB 6.9 225 5.72∼6.99 - - - - - -
*2
6.6∼8.9 300 7.62∼8.89 2.0
∼1.5
■Feature of Electric Feeder
Type N1 SFN1EB 7.2 225 5.72∼6.99 - - - - - -
Type N2 SFN2EB 300 7.62∼8.89 2 300 8.38∼8.76 285×325 8.05∼8.31 4.2∼5.08
●Automatic pick position
9.2
●Intelligent Feeders correction 3.25∼3.76 290×490 8.13∼8.51
Type N3 SFN3EB 11.2 375 9.53∼10.8 2.5 350 9.65∼10.03 350×350 9.78∼10.03 4.2∼4.57
350×550 4.2∼5.08
Type N4 SFN4EB 13 450 11.43∼12.7 3 400 10.92∼11.3 450×450 12.32∼12.57 4.2∼4.57
12.19∼12.57 400×550 4.2∼5.08
Type W1 SFW1EB 15 525 13.34∼14.61 3.5 - - - - - -
Type W2 SFW2EB 18.2 600 15.24∼16.51 4 - - - 650×650 17.4∼17.65 4.2∼5.08
Intelligent feeders are available on RF, EF, and mechanical series feeders. Feeders automatically adjust the Type W3 SFW3EB 20.8 - - - - - - 750×750 19.94∼20.19
A new CAN Bus network is used on the RF or EF series improving the price
*1
presentation position baed on Type W4 SFW4EB 26 - - - - - - 950×950 25.02∼25.27
performance. RFID can be used with mechanical and EF series feeders.
*2
feedback from the centering Type W5 SFW5EB 31.2 - - - - - - 1150×1150 30.1∼30.55
All models provide part verifications and traceability (optional) for system. This results in improved
unequaled factory floor control. pick accuracy and higher oppor- *1 When shipping
*2 Adjustable
tunity for gang picking and higher * Optional spacer kits are provided to change Type N1 through N4 and W1 through W5 to another type of feeder.
speed placement. * Type N0 has high precision width adjustment for SOP8~10 pin.
*1 RS-1,RX-7,KE-3000 series. * Corresponding stick thickness 9 mm or less, and distance 3 mm or less from the bottom of the stick to the bottom of the part is recommended.
Machine upgrade required * When using the stick feeder with the RF bank, a separate attachment is required.
*2 Not available on RS-1 and RX7.
IFS-NX antennas sold separately
For EF and mechanical feeders
Mechanical Feeder series Comprehensive Feeder Assortment
■CF/FFseries ■Stick Feeder
CF081PR SFN0AS
Reliable, accurate mechanical tape feeders are available Feeder for components packed in stick. Easy installation and quick setting.
for all common SMT tape widths. Available in either fixed
pitch or flexible pitch, these feeders are designed for
simplicity, durability and highly reliable feeding.
■Stick Feeder Specifications
■CF/FF series Specifications Lane width QFJ(PLCC） SOJ
Feeder SOP
(㎜） nominal nominal nominal
Type Parts.No. W(㎜） T(㎜） W(㎜） T(㎜） size（mil） W(㎜） T(㎜）
Part.No. Pitch Tape size Part. No Pitch Tape size size（mil） size（mil）
∼1.5
*1
TypeＮ0 SFN０AS 6.9 225 5.72∼6.99
AQ02HP 2 0402（paper tape）*1 FF242S 8 24㎜
*2
6.6∼9.2 300 7.62∼8.89 2.0
CF03HPR 2 0603（paper tape） FF243S 12
TypeN1 SFN1AS 7.2 225 5.72∼6.99 ∼1.5 285×425
CF05HPR 2 1005（paper tape） FF244S 16
TypeN2 SFN２AS 9.2 300 7.62∼8.89 2.0 290×490 8.05∼8.31 4.02∼5.08 300 8.38∼8.76
CF08HER 2 8㎜（embossed） FF245S 20
350 8.13∼8.51
CF081PR 4 8㎜（paper tape） FF246S 24 11.2
TypeN3 SFN３AS 375 9.53∼10.8 2.5 350×550 9.78∼10.03 4.20∼4.57 350 9.65∼10.03 3.25∼3.76
CF081ER 4 8㎜（embossed） FF24FS 8∼24 450 4.20∼5.08
CF8L1PR 4 8㎜（paper tape）large reel FF24NS 4∼12 TypeN4 SFN４AS 13.0 450 11.43∼12.7 3.0 450×550 12.32∼12.57 4.20∼4.57 400 10.92∼11.30
CF8L1ER 4 8㎜（embossed）large reel FF323R 12 32㎜ 4.20∼5.08 450 12.19∼12.57
1005（paper tape）
*1
CN05HPR 2 FF324R 16 *special large package feeder Type W1 SFW１AS 15.0 525 13.34∼14.61 3.5 650
8㎜（embossed） 18.2
*1 Type W2 750
CN08HER 2 FF32FR 8∼24 SFW２AS 600 15.24∼16.51 4.0 17.40∼17.65
*2 *3 TypeW3 SFW３AS 20.8 950 19.94∼20.19 4.20∼5.08
CN081CR 4 8㎜(paper/embossed) FF32FR-OP 8∼32
*2 TypeW4 SFW４AS 26.0 1150 25.02∼25.27
CN8L1CR 4 8㎜(paper/embossed) large reel FF443R 12 44㎜
TypeW5 SFW５AS 31.2 30.10∼30.55
FF121S 4 12㎜ FF444R 16 *special large package feeder
8 FF44FR 8∼24 *1 When shipping
FF122S
*2 Adjustable
*3
FF123S 12 FF44FR-OP 8∼44 * Optional spacer kits are provided to change Types N1 through N4 and W1 through W5 to another type of feeder.
* TypeN0 has high precision width adjustment for SOP 8~10pin.
FF12FS 4∼12 FF564R 12∼16 56㎜
FF12NS 4∼12 FF568R 12∼32 *special large package feeder
FF161S 4 16㎜ FF56FR 8∼24
*
FF162S 8 FF56FR-OP 8∼56
FF163S 12 FF724S 12∼16 72㎜
FF16FS 4∼12 FF728S 12∼32
FF16NS 4∼12
*1 One fixing pin(also available KE-700 series)
*2 Please ask us about use of paper / emboss common type tape feeder.
*3 Please ask for details on FF 32 / 44 / 56 FR-OP.
Productivity improvement by splicing feeder Feeder Options
■AF Feeder ■Large AF Feeder ■Inspection/Calibration Jig
Feeder adjustment jigs are available for both mechani-
cal and electronic feeders. These jigs are used by
maintenance personnel to periodically recalibrate the
feeders in order to maintain high reliability and accura-
cy. The jigs are simple to use and include a monitor
for adjustments and final check.
AF series feeders are designed to Larger AF feeders support splicing
Electric EF type Mechanical type
support tape splicing for fast, easy and can also accept deeper pocket
■Feeder Stocker For Electric Feeder ■Splicing function
component replenishment during tape for taller components such as
production. electrolytic capacitors or connec-
tors.
Tape cutting jig
■AF series Specifications
*1
■8㎜ Tape feeder ■12∼24㎜ Tape feeder Electric type Splicing tape Splicing jig
Parts. No. Pitch Tape size Parts No. Pitch Tape size Maximum 80 Electric feeders can be stored. Splicing tape and jig provide reliable and inexpensive
(This is based on 8mm feeder size.) tape splices. Use of splicing can decrease downtime
AF05HP 2 1005（paper） AF121S 4 12㎜
and increase productivity.
AF08HE 2 8㎜（embossed） AF122S 8
AF081P 4 8㎜（paper） AF123S 12
AF12FS 4∼12
AF081E 4 8㎜（embossed）
AN05HP 2 1005用（paper）
AF12NS 4∼12
■Electric Trolley Power Station PW01/PW02 ■Feeder Setup Stand
AF161S 4 16㎜
AN08HE 2 8㎜（embossed）
AF162S 8
AN081P 4 8㎜（paper）
AF163S 12
AN081E 4 8㎜（embossed）
AF16FS 4∼16
8㎜（paper/embossed）
*2
AN081C 4
AF16NS 4∼12
AF242S 8
AF243S 12 24㎜
AF244S 16
AF245S 20
AF246S 24
AF24FS 8∼24
AF24NS 8・12
Electric type（EF series) Mechanical type
AF24FS-OP 8∼24 *large package
The eletric trolley power station provides power to The feeder setup stand provides a way to load tape
electric feeders when they are off the machine. This into the electronic feeders off-line to improve efficiency.
can help in changeover time and provide a place to It holds the feeder stably and in a position that aids in
Compatibility between tape feeder and feeder trolley load feeders when preparing future jobs. loading.
*1 Either one fixing pin or two fixing pin type is available. Select appropriate tape feeder type with your feeder bank.
*2 Please ask us about use of paper/emboss common type tape feeder.
