30.01.

2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

TIGHTENING TORQUES : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6

ENGINES
1 - CYLINDER HEAD

1 - 1 - Tightening torques

b1bb0pmd

Reference Designation Tightening torque

Pre-tighten to 2 daNm
(1) bolts (Cylinder head) (*) (**) Tightening to 4 m.daN
Angular tightening to 260°
(2) bolts (Rear upper timing cover ) (*) 1 daNm
Pre-tighten to 0,5 daNm
(3) bolts (Oil trap) (*)
Tightening to 1,3 m.daN
Pre-tighten to 0,3 daNm
(4) bolts (Camshaft bearings covers) (*)
Tightening to 1 m.daN
Pre-tighten to 0,5 daNm
(5) bolts ( vacuum pump)
Tightening to 1,8 m.daN
Pre-tighten to 0,5 daNm
(6) bolts ( vacuum pump)
Tightening to 2 m.daN
(7) bolts ( lifting bracket ) 2 daNm
(8) nuts (Exhaust manifold heat shield) 0,8 daNm
(9) nuts (Exhaust manifold) (*) (**) 2,5 daNm
(10) studs (Exhaust manifold) 1 daNm
(11) Pre-heater plugs 0,6 daNm
(*) Follow the tightening sequence
(**) Always to be replaced whenever removed

1 - 2 - Sequence of tightening the bolts (1)

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 1/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1mhd

WARNING :
Follow the tightening sequence

1 - 3 - Sequence of tightening of screws (2) and (3)

b1bb0mid

(2) bolts (Rear upper timing cover ).

(3) bolts (Oil trap).

WARNING :
Follow the tightening sequence

1 - 4 - Sequence of tightening the bolts (4)

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 2/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1mid

WARNING :
Follow the tightening sequence

1 - 5 - Sequence of tightening of nuts (9)

b1jp0a5d

WARNING :
Follow the tightening sequence

2 - CYLINDER BLOCK

2 - 1 - Tightening torques

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 3/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb0mjd

Reference Designation Tightening torque

(1) Caps (Cylinder block ) 3,2 daNm
Pre-tighten to 0,5 daNm
(2) bolts (Conrods) Tightening to 1 m.daN
Angular tightening to 130°
Pre-tighten to 2,5 daNm
bolts (Double damped flywheel) (according to equipment) (*) Pre-tighten to 0,8 daNm
(**) Tightening to 3 m.daN
Angular tightening to 90°
(3)
Pre-tighten to 2,5 daNm
Pre-tighten to 0,8 daNm
bolts (Engine flywheel) (according to equipment) (*) (**)
Pre-tighten to 1,7 daNm
Angular tightening to 75°
Pre-tighten to 0,6 daNm
(4) bolts (Crankshaft main bearing cap casing) (*)
Tightening to 0,8 m.daN
Pre-tighten to 0,6 daNm
(5) bolts (Crankshaft main bearing cap casing) (*)
Tightening to 0,8 m.daN
Pre-tighten to 1 daNm
Angular slackening of 180°
(6) bolts (Bearing caps) (*)
Tightening to 3 m.daN
Angular tightening to 140°
Pre-tighten to 3,5 daNm
(7) bolts (Accessories drive pulley) (**)
Angular tightening to 190°
studs (Catalytic converter/particle filter assembly) (according
(8) 0,6 daNm
to equipment)
(*) Follow the tightening sequence
(**) Always to be replaced whenever removed

2 - 2 - Sequence of tightening the bolts (3)

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 4/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1mld

WARNING :
Follow the tightening sequence

2 - 3 - Sequence of tightening of screws (4), (5) and (6)

b1db01bd

(4) bolts (Crankshaft main bearing cap casing) ( bolts M6 ).

(5) bolts (Crankshaft main bearing cap casing) ( bolts M6 ).

(6) bolts (Bearing caps) ( bolts M9 ).

WARNING :
Follow the tightening sequence

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 5/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

Tightening procedure :

Pre-tightening of the 10 bolts (6) to 1 m.daN (from 1 to 10)

Pre-tightening of the 14 bolts (5) to 0,6 m.daN (from 11 to 24)
Tightening of the 2 bolts (4) to 0,8 m.daN (inside the flywheel bell housing)
Slackening of the bolts (6) by 180°
Tightening of the 10 bolts (6) to 3 m.daN (from 1 to 10)
Angular tighten the screws (6) to 140 ° (from 1 to 10)
Tightening of the 14 bolts (5) to 0,8 m.daN (from 11 to 24)

3 - LUBRICATION

3 - 1 - Tightening torques

b1fb00zd

Reference Designation Tightening torque

Pre-tighten to 0,5 daNm
(1) bolts (Oil pump assembly ) (*)
Tightening to 0,9 m.daN
(2) Oil level sensor 3 daNm
(3) Banjo bolt (Turbocharger lubricating pipe) 3 daNm
(4) bolts (Turbocharger lubrication return pipe) 0,8 daNm
(5) collars (Turbocharger lubrication return pipe) 0,3 daNm
(6) Oil filter cover 2,5 daNm
(7) bolts (Oil filter support) 1 daNm
(8) bolts (Turbocharger electrovalve support) 1 daNm
(9) bolts ( sump) 1,2 daNm
(10) bolts ( coolant/oil heat exchanger) 1 daNm
(11) drain plug 3,4 daNm
(12) Oil pressure switch 3,2 daNm
(13) bolts (Dipstick guide tube) 0,8 daNm
(14) studs ( sump) 0,8 daNm
(15) bolts (Oil suction strainer) 1 daNm
(16) bolts (Piston skirt spray jets) 2 daNm
(17) bolts (Oil filler return tube) 1 daNm
(*) Follow the tightening sequence

3 - 2 - sump - Except DV6UC engine

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 6/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1fa00wd

(9a) nut( sump).

(9b) bolts ( sump).

(14) studs ( sump).

3 - 3 - sump - DV6UC engine

b1bb1dcd

Lower oil sump :

(9a) nuts (2 nuts )

(9b) bolts ((15) bolts )
(14a) studs (2 studs )

Upper oil sump :

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 7/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

(9c) bolts (7 bolts )

(9d) nuts (2 nuts )
(14b) studs (2 studs )

3 - 4 - Sequence of tightening the bolts (1) (previous fitting)

b1fb010d

WARNING :
Follow the tightening sequence

3 - 5 - Sequence of tightening the bolts (1) (new fitting)

b1bb1y7d

WARNING :
Follow the tightening sequence

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 8/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

4 - TIMING GEAR

4 - 1 - Tightening torques

b1eb00ed

Reference Fixings Tightening torque

Pre-tighten to 2 daNm
(1) bolts (Camshaft pulley )
Angular tightening to 50°
Pre-tighten to 0,3 daNm
(2) bolts (Camshaft bearing caps) (*)
Tightening to 1 m.daN
(3) nut(Timing belt roller bearing ) 3,7 daNm
(4) Stud (Timing belt roller bearing ) 0,6 daNm
(5) bolts (Shift prevention bracket) 0,6 daNm
(6) bolts (Engine speed sensor ) 0,8 daNm
(7) bolts (Timing belt tensioner roller) 3 daNm
(8) bolts (Lower timing cover) 0,5 daNm
(9) bolts (Upper timing cover ) 0,4 daNm
(10) bolts (Camshaft position sensor) 0,8 daNm
(*) Follow the tightening sequence

4 - 2 - Sequence of tightening the bolts (2)

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 9/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1mmd

WARNING :
Follow the tightening sequence

5 - TURBOCHARGING CIRCUIT

5 - 1 - Engines DV4 euro 5(STOP AND START version) Or DV6 engines all types

b1bb0thd

Tightening
ReferenceDesignation
torque
(1) bolts (Inlet air metering unit ) 0,8 daNm
(2) bolts (Inlet air pressure and temperature sensor) 0,8 daNm
(3) bolts (Air filter chamber) 0,8 daNm
(4) bolts (Air filter cover) 0,5 daNm
(5) bolts (Air filter unit mounting) 0,8 daNm

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 10/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

(6) bolts (Air flow meter ) 0,3 daNm

(7) bolts (Turbocharger inlet duct) 0,7 daNm
(8) nut(Variable geometry turbocharger control solenoid valve) 0,8 daNm
(9) nut( turbocharger) (**) 2,6 daNm
(10) bolts (Turbocharger air cooler) 0,8 daNm
(11) Clip (Air union) (***)
(12) bolts (Turbo air cooler by-pass unit) 0,8 daNm
(13) bolts (Turbocharger noise attenuator ) 0,7 daNm
(14) bolts (Air inlet manifold) 0,8 daNm
(**) Always to be replaced whenever removed
(***) According to equipment

5 - 2 - Engine DV4 EURO 5 (Without stop and start)

b1bb0tid

Reference Designation Tightening torque

(1) bolts (Inlet air metering unit ) 0,8 daNm
(2a) bolts (Inlet air pressure sensor) 0,8 daNm
(2b) bolts (Inlet air temperature sensor) 0,8 daNm
(3) bolts (Air filter chamber) 0,8 daNm
(4) bolts (Air filter cover) 0,5 daNm
(5) bolts (Air filter unit mounting) 0,8 daNm
(6) bolts (Air flow meter ) 0,3 daNm
(7) bolts (Turbocharger inlet duct) 0,7 daNm
nut(Variable geometry turbocharger control
(8) 0,8 daNm
solenoid valve)
(9) nut( turbocharger) (**) 2,6 daNm
(11) Clip (Air union) (***)
(13) bolts (Turbocharger noise attenuator ) 0,7 daNm
(14) bolts (Air inlet manifold) 0,8 daNm
(15) collars (Hoses ) 2,5 daNm
(16) bolts (Vacuum circuit) 0,8 daNm
(**) Always to be replaced whenever removed
(***) According to equipment

5 - 3 - (***) Screw clip (11) (Air union)

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 11/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb22fd

Distance Distance
Reference
Designation Tightening torque
"A" "B"
9 mm 7 mm 0,35 daNm
(11) Clip (Air union)
12 mm 8 mm 0,5 daNm

6 - EXHAUST GAS RECIRCULATION CIRCUIT

6 - 1 - All engines except DV6C UE6

b1kb006d

ReferenceDesignation Tightening torque

(1) bolts (EGR exchanger module) 0,8 daNm
(2) bolts (EGR pipe) 0,8 daNm
(3) nut(EGR exchanger module) 0,8 daNm
(4) bolts (EGR exchanger module) 2 daNm
(5) nut(EGR (exhaust gas recycling) electrovalve) 0,8 daNm
mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 12/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

(6) bolts (EGR electrovalve support) 0,8 daNm

(7) bolts (Coolant inlet manifold) 2 daNm
(8) bolts (Coolant pipe) 0,8 daNm
(9) bolts (Vacuum pipe support) 0,8 daNm

6 - 2 - DV6C UE6 engines

b1bb22gd

ReferenceDesignation Tightening torque

(1) bolts (EGR exchanger module) 0,8 daNm
(2) bolts (EGR pipe) 0,8 daNm
(3) nut(EGR exchanger module) 0,8 daNm
(4) bolts (EGR exchanger module) 2 daNm
(5) nut(EGR (exhaust gas recycling) electrovalve) 0,8 daNm
(6) bolts (EGR electrovalve support) 0,8 daNm
(7) bolts (Coolant inlet manifold) 2 daNm
(8) Stud (Air filter support) 0,8 daNm
(9) bolts (Vacuum pipe support) 0,8 daNm

6 - 3 - Exhaust gas recirculation electric valve

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 13/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1xod

Reference Designation Tightening torque

(10) bolts (Exhaust gas recirculation electric valve) 1 daNm

7 - ENGINE COOLING SYSTEM

7 - 1 - Tightening torques

b1gb00dd

Reference Designation Tightening torque

Pre-tighten to 0,3 daNm
(1) bolts (Coolant outlet housing) (*)
Tightening to 0,8 m.daN
Pre-tighten to 0,5 daNm
(2) bolts (Coolant pump) (*)
Tightening to 0,9 m.daN
(3) bolts (Coolant inlet manifold) 2 daNm
(4) bolts (Coolant pipe) 0,8 daNm
(*) Follow the tightening sequence
mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 14/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

7 - 2 - Sequence of tightening the bolts (1)

b1bb1mjd

WARNING :
Follow the tightening sequence

7 - 3 - Sequence of tightening the bolts (2)

b1bb1mkd

WARNING :
Follow the tightening sequence

8 - INJECTION SYSTEM

8 - 1 - injection CONTINENTAL(DV6C and DV6 UE6 engines)

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 15/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1mfd

ReferenceDesignation Tightening torque

Pre-tighten to 2
daNm
(1) Connections (Diesel injector ) (**)
Tightening to 2,5
m.daN
Pre-tighten to 2
Connections (Fuel high pressure pipes / Fuel high daNm
(2)
pressure common injection rail ) (**) Tightening to 2,5
m.daN
Pre-tighten to 2
Union (High-pressure fuel pipe / Fuel high pressure daNm
(3)
pump) (**) Tightening to 2,5
m.daN
(4) bolts (Fuel high pressure pump rear bracket) 1 daNm
(5) bolts (Fuel high pressure pump rear bracket) 1 daNm
Pre-tighten to 0,7
daNm
(6) bolts (Diesel injector fixing flange)
Angular tightening
to 80°
(7) bolts (Fuel high pressure pump front bracket) 2 daNm
(8) bolts (Fuel injection pump / Bracket ) 2 daNm
(9) Fuel injection pump pulley nut 5 daNm
(10) bolts (Fuel high pressure pump rear bracket) 2 daNm
bolts (Fuel high pressure common injection rail / Engine
(11) 2 daNm
block)
(12) Fuel high pressure sensor 4,5 daNm
Pre-tighten to 0,3
bolts (Fuel pressure regulator / Fuel high pressure daNm
(13)
pump) Tightening to 0,7
m.daN
(**) Always to be replaced whenever removed

8 - 2 - BOSCH injection  All engine types except DV6C and DV6 UE6

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 16/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb1mgd

ReferenceDesignation Tightening torque

Pre-tighten to 2 daNm
(1) Connections (Diesel injector ) (**) Tightening to 2,5
m.daN
Pre-tighten to 2 daNm
Connections (Fuel high pressure pipes / Fuel high
(2) Tightening to 2,5
pressure common injection rail ) (**)
m.daN
Pre-tighten to 2 daNm
Union (High-pressure fuel pipe / Fuel high pressure
(3) Tightening to 2,5
pump) (**)
m.daN
(4) bolts (Fuel high pressure pump rear bracket) 1 daNm
(5) bolts (Fuel high pressure pump rear bracket) 1 daNm
Pre-tighten to 0,7
daNm
(6) bolts (Diesel injector fixing flange)
Angular tightening to
80°
(7) bolts (Fuel high pressure pump front bracket) 2 daNm
(8) bolts (Fuel injection pump / Bracket ) 2 daNm
(9) Fuel injection pump pulley nut 5 daNm
(10) bolts (Fuel high pressure pump rear bracket) 2 daNm
bolts (Fuel high pressure common injection rail /
(11) 2 daNm
Engine block)
(12) Fuel high pressure sensor 4,5 daNm
Pre-tighten to 0,3
bolts (Fuel pressure regulator / Fuel high pressure daNm
(13)
pump) Tightening to 0,7
m.daN
(**) Always to be replaced whenever removed

8 - 3 - Fuel filter

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 17/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb22hd

Reference Designation Tightening torque

(14) bolts (Fuel filter cover) 0,3 daNm
(15) bolts (Fuel filter ) 0,8 daNm
(16) bolts (Fuel filter support) 0,8 daNm

9 - ENGINE EQUIPMENT - WITHOUT STOP AND START

9 - 1 - Alternator - Without stop and start

d1cb004d

Reference Designation Tightening torque

(1) bolts (Multifunction support) 2 daNm
(2) bolts (Alternator ) 4,9 daNm
(3) nut(Alternator power circuit ) 1,6 daNm
(4) bolts (Alternator ) 4,3 daNm

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 18/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

9 - 2 - Version with air conditioning

c5hb00od

Reference Designation Tightening torque

(2) bolts (Alternator ) 4,9 daNm
(4) bolts (Alternator ) 4,3 daNm
(5) bolts (Air conditioning compressor support) 2 daNm
(6) bolts (Air conditioning compressor support) 2 daNm
(7) bolts ( air conditioning compressor) 2,4 daNm
(8) studs (Air conditioning compressor support) 0,6 daNm

9 - 3 - Version without air conditioning

b1bb0tkd

Reference Designation Tightening torque

(2) bolts (Alternator ) 4,9 daNm

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 19/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

(4) bolts (Alternator ) 4,3 daNm

(5) bolts (Support for auxiliary equipment) 2 daNm

9 - 4 - Dynamic roller tensioner - Electric power steering - Without stop and start

b1bb0mkd

Reference Designation Tightening torque

(1) bolts (Alternator upper support) 2 daNm
(9) bolts (Dynamic roller tensioner ) 2 daNm

9 - 5 - Dynamic roller tensioner - Hydraulic power steering - Without stop and start

b1bb1djd

Reference Designation Tightening torque

(2) bolts (Alternator ) 4,9 daNm
(3) nut (Alternator power circuit ) 1,6 daNm

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 20/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

(4) bolts (Alternator ) 4,1 daNm

(10) bolts (Roller tensioner) 4,5 daNm
(11) bolts (Automatic roller tensioner ) 3 daNm
(12) bolts (Automatic roller tensioner ) 2,1 daNm

10 - ENGINE EQUIPMENT - STOP AND START VERSION

10 - 1 - Reversible alternator - STOP AND START version

b1bb22id

Reference Designation Tightening torque

(1) bolts (Multifunction support) 2 daNm
(2) nut(Alternator power circuit ) 1,6 daNm
(3) bolts (Reversible alternator) 4,3 daNm
(4) bolts (Air conditioning compressor support) 2 daNm
(5) nuts (Air conditioning compressor support) 2 daNm
(6) studs (Air conditioning compressor support) 0,6 daNm

10 - 2 - Version with air conditioning - STOP AND START version

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 21/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb22jd

Reference Designation Tightening torque

(7) studs (Air conditioning compressor support) 0,6 daNm
(8) bolts (Air conditioning compressor support) 2 daNm
(9) nuts (Air conditioning compressor support) 2 daNm
(10) bolts ( air conditioning compressor) 2,4 daNm

10 - 3 - Version without air conditioning - STOP AND START version

b1bb22kd

Reference Designation Tightening torque

(11) bolts (Ancillary drive belt roller pulley support) 2 daNm

10 - 4 - Dynamic tensioner rollers - STOP AND START version

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 22/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

b1bb22ld

Reference Designation Tightening torque

(12) bolts (Upper dynamic tensioner roller) 2 daNm
(13) bolts (Lower dynamic tensioner roller) 2 daNm

11 - STARTER

11 - 1 - Tightening torques

d1bb00hd

Reference Fixings Tightening torque

(1) bolts (Starter (*) 2 daNm
(2) nut(Starter supply cable) 1 daNm
(3) nut(Starter energising cable) 0,5 daNm
(*) Follow the tightening sequence

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 23/24
30.01.2022 20:39 tightening torques : DV4C, DV6C, DV6DTED, DV6ETED, DV6UC, DV6 UE6 engines

11 - 2 - Sequence of tightening the bolts (1)

d1bb00kd

WARNING :
Follow the tightening sequence

mmc-manuals.ru/manuals/asx/online/Service_Manual/2018/11/ENG/1CMJ/B1BB015UP0.html 24/24