Scribd
Upload
289 views2 pages

Bill Validator User Guide

This document provides specifications and operating instructions for a bill validator with stacker. It lists the sensor set, electrical specifications including operating voltage and current, and operating temperature range. Additional features include a metal bezel and outdoor coating. Instructions are given for DIP switch settings, MDB connector pinout, jumper settings, diagnostics through flash codes, and warranty information.

Uploaded by

stefan-daniel popa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
289 views2 pages

Bill Validator User Guide

This document provides specifications and operating instructions for a bill validator with stacker. It lists the sensor set, electrical specifications including operating voltage and current, and operating temperature range. Additional features include a metal bezel and outdoor coating. Instructions are given for DIP switch settings, MDB connector pinout, jumper settings, diagnostics through flash codes, and warranty information.

Uploaded by

stefan-daniel popa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

5.

General Specifications:
User Guide
SENSOR SET: Implementation 02
CURRENCY AND INTERFACES See Software Description document
ELECTRICAL SPECIFICATION:
Operating Voltage Maximum Operating Current Maximum Current
24V AC/34V DC 0.36 A 2.0 А
Use only current limiting CSA or UL recognized CLASS 2 Power Supply.

OPERATING TEMPERATURE: -18 to +60 degrees Celsius Bill Validator with Stacker
TOTAL WEIGHT: 1.75 kg

FEATURES: Metal (cassette Up) Bezel, Handled Bill width 62…78 mm


Outdoor application (Coated boards)
Hardware part # MSM-3317
ENCLOSURE: Bill Acceptor with a Stacker
User's Guide The Part Number on the Label includes Hardware
Software description Part Number and Software Part Number.
Accessories: Example
Front Label MSM-3317 AA0000
MDB Harness, Part # OPT-HS-MDB
Mounting kit for grounding connection, # OPT-MKSM-GND 2 pcs Software Part Number
Hardware Part Number
VIEW A (It is turned)

See View A

Protective-earth ground terminal must be connected to the automat local electric earth. Electric
earth connection must be made by cable OPT-MKSM-GND or another copper wire cable with
wire gage 14…. 12 AWG. Use the shortest, practical wire length.

Crane Payment Solutions


CashCode Brand
2720 Steeles Avenue West, Units 2-3, Concord, ON Canada L4K 4S3
Phone: (905) 303-8874 Toll Free: (800) 584-2633 Fax: (905) 303-8875
www.craneps.com http://support.cashcode.com

 2013 Crane Payment Solutions PT# UG-MSM-3317_D 11/13


1. DIP Switches Setting
4. Diagnostics
See Software Description document. Count the number of flashes and compare with the diagnostic chart below:
## of flashes Malfunction
2. MDB connector pinout
1 red on black Cassette is removed from bill acceptor
3 red on black Cassette is full
Pin Circuitry Wire colour
4 red on black Failure of stacker mechanism
1 AC / DC(-) Brown
5 red on black Failure of capacitance sensors
2 AC / DC(+) White
6 red on black Failure of optical sensors
3 GND -
7 red on black Failure of magnetic sensors
4 Reserved (OUT) -
8 red on black Transporting motor failure (timeout)
5 Master Receive Black
10 red on black Failure of aligning mechanism
6 Reserved (IN) -
11 red on black Bill pathway is not empty (bill is jammed)
7 Common Green
12 red on black Fail rejecting a bill. Bill is in the entry slot of the cassette.
8 Master transmit Red
1 green on red COM port CRC Error
Mating connector:
2 green on red Internal CRC Error
MOLEX: Dual Row Interim Clip #15-04-5084 - 1 pcs.
3 green on red Improper CCMS format
Single Row Crimp Housing #50-57-9304 - 2 pcs.
Fem. Box, Crimp Terminals #16-02-0086 - 7 pcs. 4 green on red CCMS is absent
5 green on red Improper type of CCMS
6 green on red Download Error

3. Jumper Settings
for MDB Mode (Default) Connection to OPT-AD-MDB,
OPT-AD-SP, OPT-AD-HII

JP1
1

You might also like