Scribd
Upload
268 views16 pages

Material Item Specification Fill Capacity: SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual Specifications

This document provides specifications and procedures for servicing the front disc brake system on a 2014 Ford F-150. It lists specifications for brake fluid, brake pad thickness, brake disc thickness, and torque values for brake components. It also describes the components of the front disc brake system and provides instructions for removing and installing the brake caliper anchor plate, brake caliper, brake disc shield, and brake disc. Removal and installation procedures include safety notices and specify the use of brake cleaner.

Uploaded by

Henry Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
268 views16 pages

Material Item Specification Fill Capacity: SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual Specifications

This document provides specifications and procedures for servicing the front disc brake system on a 2014 Ford F-150. It lists specifications for brake fluid, brake pad thickness, brake disc thickness, and torque values for brake components. It also describes the components of the front disc brake system and provides instructions for removing and installing the brake caliper anchor plate, brake caliper, brake disc shield, and brake disc. Removal and installation procedures include safety notices and specify the use of brake cleaner.

Uploaded by

Henry Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

2014 F-150 Workshop Manual Page 1 sur 2

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


SPECIFICATIONS Procedure revision date: 10/25/2013

Material
Item Specification Fill
Capacity
High Performance DOT 3 WSS-M6C62-A or 1,420 ml
Motor Vehicle Brake Fluid WSS-M6C65-A1 (3 pt)
PM-1-C (US); CPM-1-C
(Canada)
Metal Brake Parts Cleaner — —
PM-4-A or PM-4-B (US);
CPM-4 (Canada)

General Specifications

cardiagn.com
Item Specification
Brake Disc
Brake disc minimum thickness 32 mm (1.259 in)
Brake Pads
Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 in)
Brake pad minimum thickness 3.0 mm (0.118 in)

Torque Specifications
Description Nm lb-ft lb-in
Brake caliper anchor plate bolts 250 184 —
Brake caliper flow bolt 35 26 —
Brake caliper guide pin bolts 37 27 —
Brake disc shield bolts 18 — 159
Brake flexible hose bracket-to-wheel knuckle bolt 30 22 —
Brake tube fitting 17 — 150

SE263001.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 2 sur 2

cardiagn.com

SE263001.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 1

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


DESCRIPTION AND OPERATION Procedure revision date: 10/25/2013

Front Disc Brake

The front brake disc system consists of the following components:

z Brake pads
z Brake caliper anchor plate
z Brake caliper
z Brake disc
z Brake disc shield
z Brake flexible hose

When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic
pressure by the master cylinder. The hydraulic force is directed to the disc brake calipers and transferred to
the brake pads. The brake pads are then forced against the brake friction surfaces by the brake caliper

cardiagn.com
pistons. The friction of the brake pads on the brake disc causes the slowing of wheel rotation and the
vehicle.

SE263002.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 1

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


DIAGNOSIS AND TESTING Procedure revision date: 10/25/2013

Front Disc Brake

Refer to Section 206-00 .

cardiagn.com

SE263003.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 2

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


REMOVAL AND INSTALLATION Procedure revision date: 10/25/2013

Brake Caliper Anchor Plate

Material
Item Specification
Metal Brake Parts Cleaner —
PM-4-A or PM-4-B (US); CPM-4
(Canada)

Removal

1. Remove the brake pads. For additional information, refer to Brake Pads in this section.

cardiagn.com
2. Discard the specified component. Follow local disposal regulations.
Apply the specified chemical with a spray can
Clean the specified component with the specified material
z To install, tighten the new bolts to 250 Nm (184 lb-ft).

Installation

1. To install, reverse the removal procedure.

SE263006.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 2 sur 2

cardiagn.com

SE263006.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 2

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


REMOVAL AND INSTALLATION Procedure revision date: 10/25/2013

Brake Caliper

Removal

specification. Additionally, do not use brake fluid that has been previously drained. Following these
instructions will help prevent system contamination, brake component damage and the risk of
serious personal injury.

information seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-
3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available.
Failure to follow these instructions may result in serious personal injury.

cardiagn.com
NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur.
If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the wheel and tire. For additional information, refer to Section 204-04 .

2. Discard the specified component. Follow local disposal regulations.


1. NOTE: Use 2 new copper washers.

To install, tighten to 35 Nm (26 lb-ft).


2. NOTE: Tighten the lower brake caliper guide pin bolt first.

To install, tighten to 37 Nm (27 lb-ft).

Installation

1. To install, reverse the removal procedure.

2. Bleed the brake caliper. For additional information, refer to Component Bleeding in Section 206-00 .

SE263005.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 2 sur 2

cardiagn.com

SE263005.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 1

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


REMOVAL AND INSTALLATION Procedure revision date: 10/25/2013

Brake Disc Shield

Removal

1. Remove the brake disc. For additional information, refer to Brake Disc in this section.

2.
z To install, tighten to 18 Nm (159 lb-in).

cardiagn.com
Installation

1. To install, reverse the removal procedure.

SE263008.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 2

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


REMOVAL AND INSTALLATION Procedure revision date: 10/25/2013

Brake Disc

Material
Item Specification
Metal Brake Parts Cleaner —
PM-4-A or PM-4-B (US); CPM-4
(Canada)

Removal

1. Remove the wheel and tire. For additional information, refer to Section 204-04 .

cardiagn.com
2. NOTICE: Do not allow the caliper and anchor plate assembly to hang from the brake hose or
damage to the hose can occur.

Discard the specified component. Follow local disposal regulations.


Relocate and support the component.
z To install, tighten the 2 new bolts to 250 Nm (184 lb-ft).

3.

Installation

1. Apply the specified chemical with a spray can.


Clean the specified component with the specified material.

SE263007.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 2 sur 2

cardiagn.com
2. To install, reverse the removal procedure.

SE263007.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 2

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


REMOVAL AND INSTALLATION Procedure revision date: 10/25/2013

Brake Flexible Hose

Removal

specification. Additionally, do not use brake fluid that has been previously drained. Following these
instructions will help prevent system contamination, brake component damage and the risk of
serious personal injury.

information seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-
3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available.
Failure to follow these instructions may result in serious personal injury.

cardiagn.com
NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur.
If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.

1. Discard the specified component. Follow local disposal regulations.


1. NOTE: Use new copper washers.

To install, tighten to 35 Nm (26 lb-ft).


2. To install, tighten to 17 Nm (150 lb-in).
3. To install, tighten to 30 Nm (22 lb-ft).

SE263009.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 2 sur 2

Installation

1. To install, reverse the removal procedure.


z Bleed the brake caliper. For additional information, refer to Component Bleeding in Section
206-00 .

cardiagn.com

SE263009.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 1 sur 3

SECTION 206-03: Front Disc Brake 2014 F-150 Workshop Manual


REMOVAL AND INSTALLATION Procedure revision date: 10/25/2013

Brake Pads

Material
Item Specification
High Performance DOT 3 WSS-M6C62-A or
Motor Vehicle Brake Fluid WSS-M6C65-A1
PM-1-C (US); CPM-1-C
(Canada)

Removal

cardiagn.com
specification. Additionally, do not use brake fluid that has been previously drained. Following these
instructions will help prevent system contamination, brake component damage and the risk of
serious personal injury.

information seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-
3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available.
Failure to follow these instructions may result in serious personal injury.

possibility of brakes pulling vehicle to one side. Failure to follow this instruction may result in
uneven braking and serious personal injury.

NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur.
If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.

NOTE: Removal steps in this procedure may contain installation details.

1. Visual check. Extract the fluid with a syringe.


If necessary, remove fluid until the brake master cylinder reservoir is half full.

2. Remove the wheel and tire. For additional information, refer to Section 204-04 .

SE263004.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 2 sur 3

3. NOTICE: Do not allow the caliper to hang from the brake hose or damage to the hose can
occur.

Relocate and support the component.


z To install, tighten to 37 Nm (27 lb-ft).

4.

cardiagn.com
5. NOTE: Protect the piston and boots when pushing the caliper piston into the caliper piston bores or
damage to the piston or boots may occur.

If installing new brake pads, Use a C-clamp and a worn brake pad to compress the disc brake caliper
pistons into the brake caliper bore.

Installation

NOTE: If installing new brake pads, make sure to install all new hardware and specified lubricant supplied
with the brake pad kit. Refer to the brake pad instruction sheet when applying lubricant.

1. To install, reverse the removal procedure.


1. Fill the master cylinder with clean, specified brake fluid.

SE263004.HTM~gen~ref.HT... 2014-03-01
2014 F-150 Workshop Manual Page 3 sur 3

2. Apply brakes several times to verify correct brake operation.

cardiagn.com

SE263004.HTM~gen~ref.HT... 2014-03-01

You might also like