Mushroom with Big hat
Knitting pattern by Julia Pankova
@knitbyjul
Ready toy size is 11 см
You will need:
• Needles: A set of a 5 double pointed (socks) needles 2,5 mm
• Yarn: Yarn by your choice, I used Lama premium acrylic 50 gr/130 m for the foot and
Drops Alpaca 50gr/ 167 m (double thread) for the hat
• Soft filling
• Sewing needle for knitted staff
General abbreviations
St/sts – stitch/ stitches
K – knit
P – purl
Inc – increase
Dec – decrease
RH/ LH – right hand/ left hand
RS/ WS – right side/ wrong side
K2tog/ K3tog – knit two stitches together/ knit three stitches together
P2tog/ P3tog – purl two stitches together/ purl three stitches together
Kfb – knit into front, then into back of stitch to increase by one
Pfb – purl into front, then into back of stitch to increase by one (see
attached video)
Skpo – slip one stitch, knit next stitch, pass slipped stitch over knit
stitch to decrease by one
PM – place marker
This toy is knitting by one piece.
Then, if you wish - you knit two hands )))
If you’ll have difficulty with pattern or questions about details,
you can send me a message and I’ll do my best to answer you))
2
Start knitting from the base:
Row 1. Cast on 6 sts and arrange them on a 3 needles = 6 sts
Row 2. Inc) Kfb 6 sts = 12 sts
Row 3. Inc) (Kfb, K1) * 6 times = 18 sts.
Row 4. Inc) (K2, Kfb) * 6 times = 24 sts
Row 5-10. PM Knit 24 sts
Row 11. Dec) (K3tog, K2)* 2 times, (K2tog, K2) * 2 times, K3tog,
K3 = 16 sts
Row 12-18. Knit 16 sts
Row 19. Dec) K6, K3tog, K3, K3tog, K = 12 sts
Row 20-22. Knit 12 sts
Stuff the toy with soft filling
Row 23. Dec) (K1, K3tog) * 3 times = 6 sts
Row 24-25. Knit 6 sts
Start the hat knitting:
Row 26. Inc) Kfb 6 sts = 12 sts
Row 27. Inc) Kfb 12 sts = 24 sts
Row 28-29. Knit 24 sts
Row 30. Inc) (K2, Kfb) * 8 times = 32 sts
Row 31. Knit 32 sts
3
Changing to another yarn (cut the base thread, leaving about 5-7
cm (pic.1), so you can tie an edges (pic.2).
Pic.1. Pic.2.
Row 32. Knit 32 sts
Row 33. Pfb * 32 sts = 64 sts
Row 34. Purl 64 sts
Row 35-40. Knit 64 sts
Sew the hat to the base (pic.3, 4)
Pic.3. Pic.4.
4
Row 41. Dec) (Skpo, K2) * 16 times = 48 sts
Row 42-43. Knit 48 sts
Row 44. Dec) (K1, Skpo) * 16 times = 32 sts
Row 45-46. Knit 32 sts
Row 47. Dec) (K1, Skpo) * 10 times, K2 = 22 sts
Row 48-49. Knit 22 sts
Row 50. Dec) Skpo * 11 times = 11 sts
Staff the hat with soft filling))
Row 51. Knit 11 sts
Row 52. Dec) Skpo * 2 times, K3tog, Skpo * 2 times = 5 sts
Cut the thread and pull the end trough 5 sts to close and secure
(pic.5, 6)
Pic.5. Pic.6.
Hands (the same knitting for both):
Row 1. Cast on 6 sts
Row 2-5. Knit on the RS and Purl on the WS 6 sts
5
Cut the thread and pull the end trough 6 sts to close. Then sew
from the side (pic.7, 8)
Pic.7. Pic.8.
Sew the hands on the base. Put on the eyes. Embroider grass
on the base and mouth if you wish)))
6
Mushroom with Small hat
Knitting pattern by Julia Pankova
@knitbyjul
Ready toy size is 10 см
You will need:
• Needles: A set of a 5 double pointed (socks) needles 2,5 mm
• Yarn: Yarn by your choice, I used Lama premium acrylic 50 gr/130 m for the foot and
thick woolen yarn (for needles 4-5 mm) for hat
• Soft filling
• Sewing needle for knitted staff
7
Start knitting from the base:
Row 1. Cast on 6 sts and arrange them on a 3 needles = 6 sts
Row 2. Inc) Kfb 6 sts = 12 sts
Row 3. Inc) (Kfb, K1) * 6 times = 18 sts
Row 4. Inc) (K2, Kfb) * 6 times = 24 sts
Row 5-10. PM Knit 24 sts
Row 11. Dec) (K3tog, K2)* 2 times, (K2tog, K2) * 2 times, K3tog,
K3 = 16 sts
Row 12-18. Knit 16 sts
Row 19. Dec) K6, K3tog, K3, K3tog, K = 12 sts
Row 20-22. Knit 12 sts
Stuff the toy with soft filling
Row 23. Dec) (K1, K3tog) * 3 times = 6 sts
Row 24-25. Knit 6 sts
Start the hat knitting:
Row 26. Inc) Kfb 6 sts = 12 sts
Row 27. Inc) Kfb 12 sts = 24 sts
Row 28-29. Knit 24 sts
Row 30. Inc) (K2, Kfb) * 8 times = 32 sts
Row 31. Knit 32 sts
8
Changing to another yarn (cut the base thread, leaving about 5-7
cm (pic.1), so you can tie an edges (pic.2).
Pic.1. Pic.2.
Row 32. Knit 32 sts
Row 33. Purl 32 sts
Row 34-38. Knit 32 sts
Sew the hat to the base (pic.3, 4)
Pic.3. Pic.4.
9
Row 39. Dec) (Skpo, K2) * 8 times = 24 sts
Row 40. Knit 24 sts
Row 41. Dec) (K1, Skpo) * 8 times = 16 sts
Row 42-44. Knit 16 sts
Staff the hat with soft filling))
Row 45. Dec) Skpo * 8 times = 8 sts
Cut the thread and pull the end trough 8 sts to close and secure
(pic.5, 6)
Pic.5. Pic.6.
Hands (the same knitting for both):
Row 1. Cast on 6 sts
Row 2-5. Knit on the RS and Purl on the WS 6 sts
10
Cut the thread and pull the end trough 6 sts to close. Then sew
from the side (pic.7, 8)
Pic.7. Pic.8.
Sew the hands on the base. Put on the eyes. Embroider grass
on the base and mouth if you want)))
11
IMPORTANT: This knitting pattern is for your personal use only!
This description is my author's development and is subject of
copyright.
Please, don’t post it in the public domain on the Internet, do not
send it to others or translate it into other languages and distribute
it in any other way.
Toys related to this description may be offered for sale. I’ll be
grateful to you if you indicate me as the author of this toy pattern
when publishing a photo))
Thank you for purchasing this knitting pattern!!!
I hope this knitted toy will delight you and your loved ones!!!
Best regards,
Julia Pankova
@knitbyjul
E-mail: knitbyjul@gmail.com
12
