SP SERIES
MODEL SP11
SP11 PERFORMANCE Flooded Suction 3450 RPM*
FLOW (m3/h) FEATURES &
70
0 5 10 15 20 25
21
CAPABILITIES
Cur ve Le gend
#1 # 1- 4.63" (118 mm) + Self-priming, magnetic drive
1.5 Hp
1.0 Hp 30% #2- 4.38" (111 mm)
60 35%
#3- 4.13" (105 mm) 18 + Five-year warranty
40%
HEAD (ft)
#2 #4- 3.88" (99 mm) + Provides up to 25 ft. (7.6 m) lift
HEAD (m)
#5- 3.63" (92 mm)
50
20% or equivalent
15
#3
45% 2.0 Hp + Primes 18 ft. (5.5 m) in 90 seconds
#4 with maximum diameter impeller
40 12
#5 + Retains fluid for re-priming when
shut off without a check valve
30 9
+ Extended run dry ability
Minimum Continuous Flow
(with carbon bushing)
20 6 + High operating efficiency
NPSHR (m)
NPSHR (ft)
+ Polypropylene or PVDF construction
10 3 + Powerful neodymium magnets
NPSHR + Close-coupled design
0 0 + Threaded (NPT or BSP), union or
0 20 40 60 80 100 120
flange connections
FLOW (USgpm)
+ Back pullout design
SP11 PERFORMANCE Flooded Suction 2900 RPM*
+ Mounts to NEMA and
(B5 & B14) IEC motor frames
25
Cur ve Le gend
+ Easy set measurement free drive
#6- 133 mm (5.25") + ISO 1940 G2.5 balancing
1.1 kW #7- 127 mm (5.00")
#6
#8- 121 mm (4.75") + CE certified
20 #9- 114 mm (4.50") + High working pressure up to
HEAD (m)
#7 #10- 108 mm (4.25")
90 psi (6.2 bar)
.75 kW
#8 20% 25%
+ Specific gravity over 1.8
35% 40% 45%
15 #9 + Polypropylene—180o F (82o C)
1.5 kW
+ PVDF—220o F (104o C)
#10
10
APPLICATIONS
+ Rail cars
NPSHR (m)
Minimum Continuous Flow
+ Tanker trucks
5 + Tanks with an opening on top
NPSHR + Bulk storage to day or process
tank transfer
0 + Sumps and reservoirs
0 5 10 15 20 25 + Below grade storage tanks
FLOW (m3/h)
+ Over-the-wall applications
Notes: Performance curves above are based on flooded suction. + When run-dry protection is needed
*Performance will vary with suction lift conditions. For performance at various suction lifts, see curve
book on FTI web site (www.finishthompson.com) or contact factory.
+ and many more!
Warning! SP Series not recommended for pumping flammables!
FINISH THOMPSON PUMPING SOLUTIONS AROUND THE WORLD finishthompson.com
SP SERIES
Specifications 7
4 6
Description Polypropylene PVDF 1
1 Housing Glass-fiber reinforced Carbon-fiber reinforced 8
4 Separator plate polypropylene (GF PP) PVDF (CF PVDF) 89 12
6 Inner volute
7 Impeller
3A, O-ring options FKM, EPDM
5, 10
3* Fill and drain plugs Polypropylene PVDF
6A Inner volute thrust High purity alumina ceramic, or silicon carbide (SiC)
ring 11
7A Impeller thrust ring GF molybdenum disulfide filled PTFE, or SiC
8 Inner drive Neodymium iron boron Neodymium iron boron 13
magnets encapsulated in magnets encapsulated in 3A
unfilled polypropylene unfilled PVDF
8A Bushing Carbon, PTFE, high purity alumina ceramic, or SiC 11A
9 Shaft High purity alumina ceramic, Hastelloy® C, or SiC
11 Barrier GF PP CF PVDF
11A Barrier thrust ring High purity alumina ceramic
12 Motor adapter Ductile iron 5 6A 7A
3
13 Outer drive magnets Nickel-plated neodymium iron boron magnets/steel 8A 10
14* Motor adapter Buna N
sealing kit (NEMA only) Hastelloy® C is a registered trademark of Haynes International, Inc.
*Not shown
Dimensions Also available 1-1/2” x 1-1/2” 150 lb.
ANSI/ISO PN20/PN40/JIS 10K or 'B' *
50mm x 50mm union connection. 'A'
6 1/8" 12 9/16"
Flanges are in compliance with bolting 1 1/2" FNPT 4 9/16" (319 mm)
(156 mm)
3 3/16"
dimensions only. OR FBSP (116 mm) 1 1/2" MNPT
(81 mm) OR MBSP
15 13/32"
(391 mm) 1 3/32"
9 13/32" (28 mm)
5" (239 mm)
(127 mm) 1/2" Ø 1/2"
Ø 3/8" (13 mm)
( Ø 9.5 mm) ( Ø13 mm)
'C'
4 11/32"
(110 mm) 'D'
8 21/32" 17 9/16"
(220 mm) (446 mm)
9 23/32"
(247 mm)
Motor Frame A B C† D† lbs. [kg] PP lbs. [kg] PVDF
NEMA 56C 12-9/16” [31.9 cm] 24-9/16” [62.4 cm] 3-3/4” [9.5 cm] 7-1/2” [19.1 cm] 25 [11.3] 30 [13.6]
NEMA 145TC 12-9/16” [31.9 cm] 23-5/16” [59.2 cm] 3-3/4” [9.5 cm] 7-1/2” [19.1 cm] 25 [11.3] 30 [13.6]
NEMA 184TC 13-7/16” [31.4 cm] 25-11/16” [66.6 cm] 3-3/4” [9.5 cm] 7-1/2” [ 19.1 cm] 26 [11.8] 31 [14.1]
IEC 80/90 w/B14 or B5 13-3/16” [33.5 cm] 23-7/8” [60.6 cm] 3-3/4” [9.5 cm] 7-1/2” [19.1 cm] 25.5 [11.6] 30.5 [13/8]
IEC 100 w/B14 13-1/4” [33.7 cm] 25-13/32” [64.5 cm] 3-5/32” [8.0 cm] 6-10/32” [16.0 cm] 25.5 [ 11.6] 30.5 [13.8]
IEC 112 w/B14 13-1/4” [33.7 cm] 25-29/32” [65.8 cm] 3-3/4” [9.5 cm] 7-1/2” [19.1 cm] 25.5 [11.6] 30.5 [13.8]
IEC 100 w/B5 13-1/4” [33.7 cm] 25-25/32” [65.5 cm] 3-5/32” [8.0 cm] 6-10/32” [16.0 cm] 31.5 [14.3] 36.5 [16.6]
IEC112 w/B5 13-1/4” [33.7 cm] 26-5/8” [67.6 cm] 3-3/4” [9.5 cm] 6-10/32” [16.0 cm] 31.5 [14.3] 36.5 [16.6]
Dimensions and weights are for reference only. Weights listed are for pump only; motor not included.
†Varies with motor manufacturer.
FINISH THOMPSON INC. - UNITED STATES FINISH THOMPSON INC. - GERMANY
921 Greengarden Road | Erie, PA 16501 Otto-Hahn-Strasse 16 | Maintal, D-63477 Germany
800.934.9384 | ph 814.455.4478 | fx 814.455.8518 49 (0)6181-90878-0 | fx 49 (0)6181-90878-18
finishthompson.com email fti@finishthompson.com email fti@finishthompson.com
