Connection Data Sheet Type OD Weight Grade

all types of
TPS MULTISEAL TS-6 Tubing 3 1/2 in. 12.95 lb/ft C110&P110

PIPE BODY
Imperial Metric
Nominal OD 3 1/2 in. 88,90 mm
Nominal ID 2 3/4 in. 69,85 mm
Nominal Wall 0.375 in. 9,525 mm
Drift Diameter 2.625 in. 66,68 mm
Tensile Yield Strength 405,000 lb 1.804 kN
Internal Yield Pressure 20,620 psi 1.422 bar
Collapse Pressure 21,050 psi 1.451 bar

CONNECTION PROPERTIES
Connection Type: Integral
Imperial Metric
Nominal OD 4.313 in. 109,55 mm
Nominal ID 2.687 in. 68,25 mm
Nominal OD Special Clearance 4.189 in. 106,40 mm
Make-up Loss Length 3.350 in. 85,10 mm
Efficiency
Tensile Yield Strength 481,950 lb 119 % 2.146 kN
Compression Strength 405,000 lb 100 % 1.804 kN
Compression Strength (TR) 351,500 lb 86,7 % 1.563 kN
Internal Yield Pressure 20,620 psi 100 % 1.422 bar
Collapse Pressure 21,050 psi 100 % 1.451 bar

FIELD MAKE-UP TORQUE

OPT.
Imperial Metric
TORQUE

MIN. Min. 7,000 ft-lb 9.490 Nm

Opt. 7,880 ft-lb 10.680 Nm

SHOULDER
TORQUE TURNS Max. 8,750 ft-lb 11.860 Nm

-100 -50 0 50 100

50
0
-100 -50

Connection VME
Option:
PTFE-RING=TR <- Compression Tension ->
(corrosion barrier) Axial load (% Pipe Body Yield Strength)

TPS Multiseal TS-6 premium connection was successfully tested in conformance with the
requirements to ISO 13679:2002, connection application level IV (CAL IV)
Sheet number: MS6-3500-1295-110 Rev.: 0 Approved: J. Spenst Date: 20.07.2017 Issued: D. Triller Date: 06.07.2017