Scribd
Upload
117 views2 pages

EC210B Track Link Tension

The document provides instructions for checking track tension and condition on an EC210B Volvo machine. It describes slowly turning the track forward and reverse to check for issues, measuring track slack in the center, and adjusting track tension according to soil characteristics with recommended clearances listed.

Uploaded by

Kevin Tang Wan Fung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views2 pages

EC210B Track Link Tension

The document provides instructions for checking track tension and condition on an EC210B Volvo machine. It describes slowly turning the track forward and reverse to check for issues, measuring track slack in the center, and adjusting track tension according to soil characteristics with recommended clearances listed.

Uploaded by

Kevin Tang Wan Fung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Service Information

Document Title: Function Group: Information Type: Date:


Track tension/condition, 173 Service Information 7/6/2022
check
Profile:
EC210B Volvo

Track tension/condition, check


Showing Selected Profile

Valid for serial numbers


Model Production site Serial number start Serial number stop
EC210B Volvo

Op nbr

This is part of another procedure

1. Place the machine in the service position F, See Service position.

Figure 1

2. Slowly turn the track in forward and reverse direction several times. Check for missing or loose or damaged shoe
screws and shoes. Stop the track while moving in the reverse direction.

3. Measure track slack at the center of track frame between track shoe and track roller mounting surface.
Figure 2

4. Adjust the track tension according to the soil characteristics. Recommended track tension is as below.
Track sag according to soil condition, unit: mm (in)

Working condition Clearance (A), unit: mm (in)


General soil 320 ~ 340 (12.6 ~ 13.4)
Rocky ground 300 ~ 320 (11.8 ~ 12.6)
Moderate soil like gravel sand, snow, etc. 340 ~ 360 (13.4 ~ 14.2)

You might also like