MITSUBISHI ELECTRIC

Mac E Series

Human Machine Interface

Installation Manual

E1100

Art. no.: 169278

10 02 2006 MITSUBISHI ELECTRIC INDUSTRIAL AUTOMATION
Version A
 Foreword

Installation manual for the E1000 series operator terminals

Foreword
The E1000 operator terminal is developed to satisfy the demands of human-
machine communication. Built-in functions such as displaying and controlling
text, dynamic indication, time channels, alarm and recipe handling are
included.

The operator terminal work, for the most part, in an object-oriented way,
making it easy to understand and use. The configuration operation of the
terminal is made in a personal computer, using the configuration tool E-
Designer. The project is then transferred and stored in the operator terminal.

The operator terminal can be connected to many types of automation

equipment, such as PLCs, servos or drives. In this manual the expression “the
controller“ is used as a general term for the connected equipment.

This manual explains how to install the operator terminal. Please refer to the
reference manual for further information.

© Mitsubishi Electric AB, MA00778A, 2005-02

The information in this document is subject to change without notice and is provided as available at the time
of printing. The manufacturer reserves the right to change any information without updating this publication.
The manufacturer assumes no responsibility for any errors that may appear in this document.
Read the entire installation manual prior to installing and using this equipment.
Only qualified personnel may install, operate or repair this equipment. The manufacturer is not responsible
for modified, altered or renovated equipment.
Because the equipment has a wide range of applications, users must acquire the appropriate knowledge to use
the equipment properly in their specific applications.
Persons responsible for the application and the equipment must themselves ensure that each application is in
compliance with all relevant requirements, standards and legislation in respect to configuration and safety.
Only parts and accessories manufactured according to specifications set by The manufacturer may be used.
THE MANUFACTURER SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,
CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE THE REPAIR,
REPLACEMENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE
REMEDY SHALL BE AT THE SOLE DISCRETION OF THE MANUFACTURER.

Mitsubishi Electric, MA00778A

Foreword

Mitsubishi Electric, MA00778A

 Table of Contents

Table of Contents
1 Safety Precautions............................................................................. 1-1
1.1 UL Installation............................................................................... 1-1
1.2 General .......................................................................................... 1-1
1.3 During Use .................................................................................... 1-1
1.4 Service and Maintenance................................................................ 1-2
1.5 Dismantling and Scrapping............................................................ 1-2
2 Installation ....................................................................................... 2-1
2.1 Space Requirements ....................................................................... 2-1
2.2 Installation Process......................................................................... 2-1
2.2.1 Mode Switches ............................................................................................... 2-3
2.2.2 Connections to the Controller ........................................................................ 2-3
2.2.3 Other Connections and Peripherals ................................................................ 2-3
3 Technical Data ................................................................................. 3-1
4 Chemical Resistance ......................................................................... 4-1
4.1 Metal Casing.................................................................................. 4-1
4.2 Keyboard and Display.................................................................... 4-1
4.2.1 Autotex F157.................................................................................................. 4-1
4.2.2 Display Surface............................................................................................... 4-2
5 Operator Terminal Drawings ........................................................... 5-1
5.1 Communication Ports.................................................................... 5-1
5.2 E1100 Outline ............................................................................... 5-2
5.3 E1100 Text Strip ........................................................................... 5-3

Mitsubishi Electric, MA00778A

Table of Contents

Mitsubishi Electric, MA00778A

 Safety Precautions

1 Safety Precautions
Both the installer and the owner and/or operator of the operator terminal must read
and understand this installation manual.

1.1 UL Installation
Power, input and output (I/O) wiring must be in accordance with Class 1, Division
2 wiring methods (Article 501-4 (b) of the National Electric Code, NFPA 70) and
in accordance with the authority having jurisdiction.

1.2 General
– Only qualified personnel may install or operate the operator terminal.
– The operator terminal must be installed according to the installation instructions.
– The operator terminal is designed for stationary installation on a plane surface,
where the following conditions are fulfilled:
• no high explosive risks
• no strong magnetic fields
• no direct sunlight
• no large, sudden temperature changes
– Never allow fluids, metal filings or wiring debris to enter any openings in the
operator terminal. This may cause fire or electrical shock.
– The operator terminal fulfills the requirements of article 4 of EMC directive
89/336/EEC.
– Storing the operator terminal where the temperature is lower/higher than
recommended in this manual can cause the LCD display liquid to congeal/become
isotopic.
– The LCD display liquid contains a powerful irritant. In case of skin contact, wash
immediately with plenty of water. In case of eye contact, hold the eye open, flush
with plenty of water and get medical attention.
– The supplier is not responsible for modified, altered or reconstructed equipment.
– Use only parts and accessories manufactured according to specifications of the
supplier.
– Peripheral equipment must be appropriate for the application and location.
– The figures in this manual serves an illustrative purpose. Because of the many
variables associated with any particular installation, the supplier cannot assume
responsibility for actual use based on the figures.
– The supplier neither guarantees that the operator terminal is suitable for your
particular application, nor assumes responsibility for your product design,
installation or operation.

1.3 During Use

– Keep the operator terminal clean.
– Emergency stop and other safety functions may not be controlled from the
operator terminal.
– Do not use too much force or sharp objects when touching the keys, display etc.

Mitsubishi Electric, MA00778A 1-1

 Safety Precautions

1.4 Service and Maintenance

– Only qualified personnel should carry out repairs.
– The agreed warranty applies.
– Before carrying out any cleaning or maintenance operations, disconnect the
equipment from the electrical supply.
– Clean the display and surrounding front cover with a soft cloth and mild
detergent.
– Replacing the battery incorrectly may result in explosion. Only use batteries
recommended by the supplier.

1.5 Dismantling and Scrapping

– The operator terminal or parts thereof shall be recycled according to local
regulations.
– The following components contain substances that might be hazardous to health
and the environment: lithium battery, electrolytic capacitor and display.

1-2 Mitsubishi Electric, MA00778A

 Installation

2 Installation
2.1 Space Requirements
– Installation plate thickness: 1.5 - 9.0 mm (0.06 - 0.35 inch)
– Space requirements when installing the operator terminal:
100 mm
(4.0 inch)

252 mm
(9.92 inch)
100 mm
(4.0 inch)
50 mm 50 mm
(2.0 inch) (2.0 inch)

100 mm
(4.0 inch)
58 mm
(2.28 inch)
382 mm
(15.04 inch)

Caution
The openings on the enclosure are for air convection. Do not cover these openings.

2.2 Installation Process

1. Unpack and check the delivery. If damage is found, notify the supplier.

Panel cut out 343 x 208 mm

(13.5 x 8.18 inch)

x 14

Note:
Place the operator terminal on a stable surface during installation.
Dropping it or letting it fall may cause damage.

2. Place the panel cut out where the operator terminal is to be situated, draw along
the outer sides of the holes and cut according to the markings. If access to the
text strips is needed, add extra space in the left corners.
For text strip

(1.38 inch)
35.0 mm
3.5 mm
(0.14 inch)

6.5 mm
35.0 mm (0.26 inch)
(1.38 inch)

Mitsubishi Electric, MA00778A 2-1

 Installation

3. Secure the operator terminal in position, using all the fastening holes and the
provided brackets and screws:

x 14

0.5 - 1.0 Nm

4. Connect the cables in the specified order.

A Caution
Ensure that the operator terminal and the controller system have the
same electrical grounding (reference voltage level), otherwise errors
in communication may occur.

B Use an M5 screw and a grounding conductor (as short as possible)

with a cross-section of minimum 2.5 mm2.
C
Caution
- Use only shielded communication cables.
- Separate high voltage cables from signal and supply cables.

D Caution
- The operator terminal must be brought to ambient temperature
before it is started up. If condensation forms, ensure that the
operator terminal is dry before connecting it to the power outlet.
- Ensure that the voltage and polarity of the power source is correct.

Power

Controller
CF CARD

B
1

RS422/RS485 24V DC
RS232 24V DC
C

Ethernet

5. Carefully remove the laminated film over the operator terminal display, to avoid
static electricity that could damage the terminal.

2-2 Mitsubishi Electric, MA00778A

 Installation

2.2.1 Mode Switches

All mode switches must be in OFF position during operator terminal use.
The mode switches should not be touched unless by qualified personell.

MODE
1 2 3 4

ON DIP

EXPANSION
MODE
1 2 3 4

ON DIP
CF CARD
BUSY

24V DC
RS485
RS422
COM 1

10/100

RS232
COM 2

1
2.2.2 Connections to the Controller
For information about the cables to be used when connecting the operator terminal
to the controller, please refer to the help file for the driver in question.

2.2.3 Other Connections and Peripherals

Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.

Caution
When using a compact flash card, do not remove the card when the busy indicator is
illuminated.

Mitsubishi Electric, MA00778A 2-3

 Installation

2-4 Mitsubishi Electric, MA00778A

 Technical Data

3 Technical Data
Parameter E1100
Front panel, W x H x D 382 x 252 x 6 mm
Mounting depth 58 mm (158 mm including clearance)
Front panel seal IP 66
Rear panel seal IP 20
Keyboard material Membrane switch keyboard with metal domes. Overlay film
of Autotex F157 * with print on reverse side. 1 million
operations.
Reverse side material Powder-coated aluminum
Weight 2.3 kg
Serial port RS422/ 25-pin D-sub contact, chassis-mounted female with
RS485 standard locking screws 4-40 UNC.
Serial port RS232C 9-pin D-sub contact, male with standard locking screws 4-40
UNC.
Ethernet Shielded RJ 45
USB Host type A, power consumption max. 500mA
Device type B
CF-slot Compact flash, type I and II
Flash memory for 4 MB
application
Real time clock ±20 PPM + error because of ambient temperature and supply
voltage.
Total max error: 1 min/month at 25 °C
Minimum life of the real time clock battery: 3 years
Temperature coefficient: 0.004 ppm/°C2
Power consumption at Normal: 0.5 A
rated voltage Maximum: 1.0 A
Display TFT-LCD. 800 x 600 pixels, 64K color.
CCFL backlight lifetime at the ambient temperature of
+25 °C: 50,000 h.
Active area of display, 211.2 x 158.4 mm
WxH
Fuse Internal DC fuse, 3.15 AT, 5 x 20 mm
Power supply +24V DC (20 - 30V DC). 3-pin jack connection block.
CE: The power supply must conform with the requirements
for SELV or PELV according to IEC 950 or IEC 742.
UL: The power supply must conform with the requirements
for class II power supplies.
Ambient temperature Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
Storage temperature -20 ° to +70 °C
Relative humidity 5 - 85 % non-condensed
EMC tests on the The operator terminal conforms with the essential protection
operator terminal requirements in article 4 of the directive 89/336/EEC. Noise
tested according to EN6100-6-4 emission and EN61000-6-2
immunity.
UL, cUL approvals Certification in progress
* See section Chemical Resistance for keyboard and display

Mitsubishi Electric, MA00778A 3-1

 Technical Data

3-2 Mitsubishi Electric, MA00778A

 Chemical Resistance

4 Chemical Resistance
4.1 Metal Casing
The frame and casing material is powder-coated aluminum. This powder paint
withstands exposure of up to 24 hours duration to the following chemicals without
visible change:

Ammonia 25% Isopropyl alcohol Nitric acid 3%

De-ionized water Tap water Chlorhydric acid 10%
Butanol Cooling liquid 50% Washer fluid 33%
Citric acid 10% Ligroin Sulphuric acid 20%
Diesel Cooking oil Turpentine
Ethanol 99.5% denaturated Lactic acid 10% Urea saturated
FAM-Normal petrol Sodium di-chromate Hydroperoxide 3%
saturated
Alcohol 95% Caustic soda 5% Acetic acid 10%
Phosphoric acid 43% Sodium hypochlorite Alu-cleaner
solution
Glycol Sodium carbonate 10% -
Industrial petrol Sodium chloride 20% -

4.2 Keyboard and Display

4.2.1 Autotex F157
Autotex F157 covers the membrane keyboard.

Solvent Resistance
Autotex F157 withstands exposure of more than 24 hours duration under DIN 42
115 Part 2 to the following chemicals without visible change:

Potassium ferrocyanide/ Sodium hypchlorite <20% 1.1.1. Trichloroethane

ferricyanide (bleach) (Genklene)
Cyclohexanol Acetaldehyde Ethylacetate
Diacetone alcohol Aliphatic hydrocarbons Diethyl ether
Glycol Toluene N-Butyl acetate
Isopropanol Xylene Amylacetate
Glycerine White spirit Butycellosolve
Methanol Fromic acid <50% Ether
Triacetin Acetic acid <50% MIBK
Dowanol DRM/PM Phosphoric acid <30% Cutting oil
Acetone Hydrochloric acid <36% Potassium carbonate
Metyl ethyl ketone Nitric acid <10% Washing powders
Dioxan Trichloracetic acid <50% Fabric conditioner
Cyclohexanone Sulphuric acid <10% Ferric chloride
Ethanol Formaldehyde 37% - 42% Ferrous chlorid
Isophorone Potassium hydroxide <30% Dibutyl Phthalate

Mitsubishi Electric, MA00778A 4-1

 Chemical Resistance

Ammonia <40% Linseed oil Dioctyl Phthalate

Caustic soda <40% Paraffin oil Sodium carbonate
Hydrogen peroxide <25% Blown castor oil Petrol
Alkalicarbonate Silicone oil Teepol
Bichromate Turpentine substitute Water
Diesel oil Univeral brake fluid Sea water
Acetonitrile Decon -
Sodium bisulphate Aviation fuel -

Autotex withstands DIN 42 115 Part 2 exposure of up to 1 hour duration to glacial

acetic acid without visible change.

Autotex is not resistant to high pressure steam at over 100 °C or the following
chemicals:

Concentrated mineral acids Benzyl alcohol

Concentrated caustic solution Mehylene chloride

Autotex withstands 24 hours exposure to the following reagents at 50 °C without

visible staining:

Top Job Grape Juice Ariel Ajax

Jet Dry Milk Persil Vim
Gumption Coffee Wisk Domestos
Fantastic - Lenor Vortex
Formula 409 - Downey Windex

Very slight discoloration was noted under critical viewing conditions with the
following materials:

Tomato juice Tomato ketchup Lemon juice Mustard

Outdoor Use
In common with all polyester based films Autotex F157 is not suitable for use in
conditoins of long term exposure to direct sunlight.

4.2.2 Display Surface

The display surface on the operator terminal withstands exposure of more than 24
hours duration to the following chemicals without visible change:

Acetic acid <5% Dichloromethane Nitric acid

(specific gravity 1.42)
Glacial acetic acid Di-ethylether Nitric acid <40%
(specific gravity 1.05)
Ethyl acetate Di-isobutylene Oleic acid
Acetone Di-methyl hormamide Olive oil
Aqueous ammonia Ethyl alcohol <95% Pure water
(specific gravity 0.9)
Aqueous ammonia <10% 2-ethyl hexoic acid Seawater
Benzene Hydrochloric acid <35% Sodium carbonate <20%

4-2 Mitsubishi Electric, MA00778A

 Chemical Resistance

Carbon tetrachloride Hydrogen peroxide <28% Sodium hypochlorite <10%

Caustic soda <48% Isopropyl alcohol Sulfuric acid
(specific gravity 1.84)
Citric acid Kerosene Sulfuric acid <30%
Cotton seed oil Methy alcohol Toluene

Mitsubishi Electric, MA00778A 4-3

 Chemical Resistance

4-4 Mitsubishi Electric, MA00778A

 Operator Terminal Drawings

5 Operator Terminal Drawings

5.1 Communication Ports

RS-232

RS-422 RS-485
RS-422/485

USB

Ethernet

Drawing No. 5005S, Date 2004-10-27

Mitsubishi Electric, MA00778A 5-1

 Operator Terminal Drawings

5.2 E1100 Outline

Drawing No. 5083S, Date 2004-10-14 (Revision date 2005-02-03)

5-2 Mitsubishi Electric, MA00778A

 Operator Terminal Drawings

5.3 E1100 Text Strip

Drawing No. 5077S, Date 2004-09-24

Mitsubishi Electric, MA00778A 5-3

 Operator Terminal Drawings

5-4 Mitsubishi Electric, MA00778A

 MITSUBISHI ELECTRIC

HEADQUARTERS EUROPEAN REPRESENTATIVES EUROPEAN REPRESENTATIVES EURASIAN REPRESENTATIVES

MITSUBISHI ELECTRIC EUROPE GEVA AUSTRIA INTEHSIS SRL MOLDOVA Kazpromautomatics Ltd. KAZAKHSTAN
EUROPE B.V. Wiener Straße 89 Cuza-Voda 36/1-81 2, Scladskaya Str.
German Branch AT-2500 Baden MD-2061 Chisinau KAZ-470046 Karaganda
Gothaer Straße 8 Phone: +43 (0) 2252 / 85 55 20 Phone: +373 (0)2 / 562 263 Phone: +7 3212 50 11 50
D-40880 Ratingen Fax: +43 (0) 2252 / 488 60 Fax: +373 (0)2 / 562 263 Fax: +7 3212 50 11 50
Phone: +49 (0) 2102 / 486-0 e mail: office@geva.at e mail: intehsis@mdl.net e mail: info@kpakz.com
Fax: +49 (0) 2102 / 486-1120
e mail: megfamail@meg.mee.com TEHNIKON BELARUS Koning & Hartman B.V. NETHERLANDS Avtomatika Sever Ltd. RUSSIA
Oktjabrskaya 16/5, Ap 704 Donauweg 2 B Lva Tolstogo Str. 7, Off. 311
MITSUBISHI ELECTRIC FRANCE BY-220030 Minsk NL-1000 AK Amsterdam RU-197376 St Petersburg
EUROPE B.V. Phone: +375 (0)17 / 210 4626 Phone: +31 (0)20 / 587 76 00 Phone: +7 812 1183 238
French Branch Fax: +375 (0)17 / 210 4626 Fax: +31 (0)20 / 587 76 05 Fax: +7 812 1183 239
25, Boulevard des Bouvets e mail: tehnikon@belsonet.net e mail: info@koningenhartman.com e mail: as@avtsev.spb.ru
F-92741 Nanterre Cedex
Phone: +33 1 55 68 55 68 Koning & Hartman B.V. BELGIUM Beijer Electronics A/S NORWAY Consys
Fax: +33 1 55 68 56 85 Researchpark Zellik, Pontbeeklaan Teglverksveien 1 Promyshlennaya St. 42 RUSSIA
e mail: factory.automation@fra.mee.com 43 N-3002 Drammen RU-198099 St Petersburg
BE-1731 Brussels Phone: +47 (0) 32 / 24 30 00 Phone: +7 812 325 3653
MITSUBISHI ELECTRIC IRELAND Phone: +32 (0)2 / 467 17 44 Fax: +47 (0) 32 / 84 85 77 Fax: +7 812 147 2055
EUROPE B.V. Fax: +32 (0)2 / 467 17 48 e mail: info@beijer.no e mail: consys@consys.spb.ru
Irish Branch e mail: info@koningenhartman.com
Westgate Business Park, Ballymount MPL Technology Sp. z o.o. POLAND Electrotechnical RUSSIA
IRL-Dublin 24 TELECON CO. BULGARIA ul. Sliczna 36 Systems Siberia
Phone: +353 (0) 1 / 419 88 00 Andrej Ljapchev Lbvd. Pb 21 4 PL-31-444 Kraków Shetinkina St. 33, Office 116
Fax: +353 (0) 1 / 419 88 90 BG-1756 Sofia Phone: +48 (0) 12 / 632 28 85 RU-630088 Novosibirsk
e mail: sales.info@meir.mee.com Phone: +359 (0) 2 / 97 44 05 8 Fax: +48 (0) 12 / 632 47 82 Phone: +7 3832 / 119598
Fax: +359 (0) 2 / 97 44 06 1 e mail: krakow@mpl.pl Fax: +7 3832 / 119598
MITSUBISHI ELECTRIC ITALY e mail: — e mail: info@eltechsystems.ru
EUROPE B.V. Sirius Trading & Services srl ROMANIA
Italian Branch AutoCont CZECH REPUBLIC Str. Biharia No. 67-77 Elektrostyle RUSSIA
Via Paracelso 12 Control Systems s.r.o. RO-013981 Bucuresti 1 Poslannikov Per., 9, Str.1
I-20041 Agrate Brianza (MI) Nemocnicni 12 Phone: +40 (0) 21 / 201 1146 RU-107005 Moscow
Phone: +39 039 6053 1 CZ-702 00 Ostrava 2 Fax: +40 (0) 21 / 201 1148 Phone: +7 095 542 4323
Fax: +39 039 6053 312 Phone: +420 59 / 6152 111 e mail: sirius@siriustrading.ro Fax: +7 095 956 7526
e mail: factory.automation@it.mee.com Fax: +420 59 / 6152 562 e mail: info@estl.ru
e mail: consys@autocont.cz INEA SR d.o.o. SERBIAANDMONTENEGRO
MITSUBISHI ELECTRIC SPAIN Karadjordjeva 12/260 Elektrostyle RUSSIA
EUROPE B.V. louis poulsen DENMARK SCG-113000 Smederevo Krasnij Prospekt 220-1, Office No.
Spanish Branch industri & automation Phone: +381 (0)26/ 617 - 163 312
Carretera de Rubí 76-80 Geminivej 32 Fax: +381 (0)26/ 617 - 163 RU-630049 Novosibirsk
E-08190 Sant Cugat del Vallés DK-2670 Greve e mail: inea_sr@verat.net Phone: +7 3832 / 106618
Phone: +34 9 3 / 565 3160 Phone: +45 (0) 70 / 10 15 35 Fax: +7 3832 / 106626
Fax: +45 (0) 43 / 95 95 91 AutoCont Control s.r.o. SLOVAKIA e mail: info@estl.ru
Fax: +34 9 3 / 589 1579 Radlinského 47
e mail: industrial@sp.mee.com e mail: lpia@lpmail.com
SK-02601 Dolný Kubín ICOS RUSSIA
MITSUBISHI ELECTRIC UK UTU Elektrotehnika AS ESTONIA Phone: +421 435868 210 Industrial Computer Systems Zao
EUROPE B.V. Pärnu mnt.160i Fax: +421 435868 210 Ryazanskij Prospekt, 8A, Off. 100
UK Branch EE-11317 Tallinn e mail: info@autocontcontrol.sk RU-109428 Moscow
Travellers Lane Phone: +372 (0) 6 / 51 72 80 Phone: +7 095 232 0207
Fax: +372 (0) 6 / 51 72 88 INEA d.o.o. SLOVENIA Fax: +7 095 232 0327
GB-Hatfield Herts. AL10 8 XB Stegne 11
Phone: +44 (0) 1707 / 27 61 00 e mail: utu@utu.ee e mail: mail@icos.ru
SI-1000 Ljubljana
Fax: +44 (0) 1707 / 27 86 95 Beijer Electronics OY FINLAND Phone: +386 (0) 1-513 8100 NPP Uralelektra RUSSIA
e mail: automation@meuk.mee.com Ansatie 6a Fax: +386 (0) 1-513 8170 Sverdlova 11A
MITSUBISHI ELECTRIC JAPAN FIN-01740 Vantaa e mail: inea@inea.si RU-620027 Ekaterinburg
CORPORATION Phone: +358 (0) 9 / 886 77 500 Phone: +7 34 32 / 532745
Fax: +358 (0) 9 / 886 77 555 Beijer Electronics AB SWEDEN Fax: +7 34 32 / 532745
Office Tower “Z” 14 F Box 426
8-12,1 chome, Harumi Chuo-Ku e mail: info@beijer.fi e mail: elektra@etel.ru
S-20124 Malmö
Tokyo 104-6212 UTECO A.B.E.E. GREECE Phone: +46 (0) 40 / 35 86 00 STC Drive Technique RUSSIA
Phone: +81 3 6221 6060 5, Mavrogenous Str. Fax: +46 (0) 40 / 35 86 02 Poslannikov Per., 9, Str.1
Fax: +81 3 6221 6075 GR-18542 Piraeus e mail: info@beijer.se RU-107005 Moscow
MITSUBISHI ELECTRIC USA Phone: +302 (0) 10 / 42 10 050 Phone: +7 095 790 7210
Fax: +302 (0) 10 / 42 12 033 ECONOTEC AG SWITZERLAND Fax: +7 095 790 7212
AUTOMATION Postfach 282
500 Corporate Woods Parkway e mail: sales@uteco.gr e mail: info@privod.ru
CH-8309 Nürensdorf
Vernon Hills, IL 60061 Meltrade Ltd. HUNGARY Phone: +41 (0) 44 / 838 48 11
Phone: +1 847 / 478 21 00 Fertõ Utca 14. Fax: +41 (0) 44 / 838 48 12
Fax: +1 847 / 478 22 83 HU-1107 Budapest e mail: info@econotec.ch
Phone: +36 (0)1 / 431-9726 AFRICAN REPRESENTATIVE
Fax: +36 (0)1 / 431-9727 GTS TURKEY
e mail: office@meltrade.hu Darülaceze Cad. No. 43 Kat. 2
TR-80270 Okmeydani-Istanbul CBI Ltd. SOUTH AFRICA
MIDDLE EAST SIA POWEL LATVIA Phone: +90 (0) 212 / 320 1640 Private Bag 2016
REPRESENTATIVES Lienes iela 28 Fax: +90 (0) 212 / 320 1649 ZA-1600 Isando
LV-1009 Riga e mail: gts@turk.net Phone: +27 (0) 11/ 928 2000
TEXEL Electronics Ltd. ISRAEL Phone: +371 784 / 22 80 Fax: +27 (0) 11/ 392 2354
Box 6272 Fax: +371 784 / 22 81 CSC Automation Ltd. UKRAINE e mail: cbi@cbi.co.za
IL-42160 Netanya e mail: utu@utu.lv 15, M. Raskova St., Fl. 10, Office 1010
Phone: +972 (0) 9 / 863 08 91 UA-02002 Kiev
Fax: +972 (0) 9 / 885 24 30 UAB UTU POWEL LITHUANIA Phone: +380 (0) 44 / 494 3355
e mail: texel_me@netvision.net.il Savanoriu pr. 187 Fax: +380 (0) 44 / 494 3366
LT-2053 Vilnius e mail: csc-a@csc-a.kiev.ua
Phone: +370 (0) 52323-101
Fax: +370 (0) 52322-980
e mail: powel@utu.lt

MITSUBISHI
ELECTRIC Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
FACTORY AUTOMATION Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-486112 /// info@mitsubishi-automation.com /// www.mitsubishi-automation.com

Specifications subject to change /// Art. no. 169278 /// 02.2006