0% found this document useful (0 votes)
195 views6 pages

Phase Out: Series R5V General Description Technical Information

The document describes the Series R5V pilot operated pressure relief valves. It has a compact design that allows direct mounting to pumps or actuators. It can be bolted together without a manifold block. It operates by releasing pressure through a main poppet when the set point is exceeded. Flow is directed to port B until pressure drops below the set point again. It has options for SAE flanges, pressure ranges, adjustment types, and includes warnings.

Uploaded by

kuncoro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
195 views6 pages

Phase Out: Series R5V General Description Technical Information

The document describes the Series R5V pilot operated pressure relief valves. It has a compact design that allows direct mounting to pumps or actuators. It can be bolted together without a manifold block. It operates by releasing pressure through a main poppet when the set point is exceeded. Flow is directed to port B until pressure drops below the set point again. It has options for SAE flanges, pressure ranges, adjustment types, and includes warnings.

Uploaded by

kuncoro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Catalog MSG14-2500/US Pressure Relief Valves

Technical Information Series R5V

General Description
Series R5V pilot operated pressure relief valves have
a similar design to the subplate mounted R4V series.
The SAE flanges allow to mount the valves directly on

s e O u t
Pha
the outlet flanges of pumps or inlet flanges of actuators
to achieve a very compact design.
Valves with SAE flanges can also be bolted together to
combine functions without the need of a manifold block.
R5V 2-Port R5V 2-Port

Operation
The system pressure in Port A is applied to the pilot
valve and to the top surface of the main poppet via an
orifice in X. The hydraulically balanced main poppet
is held against the seat by the main spring. In this
D state there is no flow through the valve. The adjusted
spring force acting on the pilot cone determines the
relief pressure. If the pressure in Port A exceeds the
set point, the pilot cone is lifted from its seat, releasing
a small pilot flow to tank. The flow through the control R5V 3-Port R5V 3-Port
orifice in X creates a pressure drop which limits the Features
pressure at the top of the main poppet to the set point.
The higher system pressure in Port A now lifts the • Pilot operated with manual adjustment
main poppet off its seat and allows flow to Port B. In • R5V with 2-port body: PHASE OUT
– 3 sizes (SAE 3/4", 1", 1-1/4")
the resulting float position only enough flow is passed
– SAE 61 flange
from Port A to Port B to maintain the inlet pressure in
Port A at the set point. When the pressure in Port A • R5V with 3-port body:
– 4 sizes (SAE 3/4", 1", 1-1/4", 1-1/2")
falls below the set point, the hydraulic balance on the
– SAE 61 and SAE 62 flange
main poppet is restored. The main spring then forces
the main poppet to close. • 3 pressure stages
• 3 adjustment modes: Hand knob, acorn nut with lead seal,
or key lock
• With optional vent function

Phase
Out

R5V 2-Port R5V 3-Port

WARNING: This product can expose you to chemicals including Lead, Nickel (Metallic), or 1,3-Butadiene which are known to the State of California to
cause cancer, and Lead or 1,3-Butadiene which is known to the State of California to cause birth defects and other reproductive harm. For more information
go to www.P65Warnings.ca.gov.

D68 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA
Catalog MSG14-2500/US Pressure Relief Valves
Ordering Information Series R5V

R5V A
Pressure Size SAE Pilot Pressure Adjustment Pilot Oil Switching Solenoid Design Seal Options
Relief Interface Ports Range Type Voltage Series
Valve

Code Description Code Description Code Description


06 SAE 3/4" Omit Standard w/o 1 Nitrile
08 SAE 1" vent function 5 Fluorocarbon
10 SAE 1-1/4" G0R 12V
12* SAE 1-1/2" G0Q 24V
* R5V 3-Port only GAR 98V
GAG 205V
W30 110V 50Hz/
120V 60Hz
W31 220V 50Hz/
240V 60Hz

SAE 61
Maximum
D
Code Size Pressure
3 12 210 Bar Code Description
(3045 PSI) Omit Standard w/o vent function
4 10 280 Bar 09* Solenoid not activ. unpress.
(4060 PSI) circulation
5 06/08 350 Bar 11** Solenoid activated unpress.
(5075 PSI) circulation
SAE 62 * Sol. de-energized: open to tank
Maximum
Sol. energized: vent line blocked.
Code Size Pressure
** Sol. de-energized: vent line blocked
6* 06/08/ 350 Bar
Sol energized: open to tank.
10/12 (5075 PSI)

* R5V 3-Port only.

2-Port Body Code Drain Line Code Description


Code DescriptionT
SE OU 2 Internal Omit Standard
PHAY1
7 = G1/4 6 External from Y1-Port 008 Vent function
3-Port Body F Internal for 2-Port with slow unloading
Code Description with X plugged
9 Y1*, X1,
M = G 1/4
* 3-Port: Y1 only
available at external
drain (pilot oil code 6).

Weight: 2-Port 3-Port


R5V06 4.0 kg (8.8 lbs.) 3.6 kg (7.9 lbs.)
R5V08 4.6 kg (10.1 lbs.) 4.6 kg (10.1 lbs.)
R4V10 5.9 kg (13.0 lbs.) 5.2 kg (11.5 lbs.)
R5V12 – 8.0 kg (17.6 lbs.)
Code Description Code Description
1 up to 105 Bar 1 Hand Knob
(1523 PSI) 3 Acorn Nut
3 up to 210 Bar with Lead Seal
(3045 PSI) 4 Key Lock
5 up to 350 Bar
(5075 Bar)

D69 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA
Catalog MSG14-2500/US Pressure Relief Valves
Technical Information Series R5V

Specifications
General
Size 06 08 10 12
Mounting Flanged according to SAE 61 / SAE 62
Mounting Position Unrestricted
Ambient Temperature Range -20°C to +50°C (-4°F to +122°F)
Hydraulic
Maximum Operating SAE 61 350 Bar 350 Bar 280 Bar 210 Bar
Pressure Ports A, B (5075 PSI) (5075 PSI) (4060 PSI) (3045 PSI)
SAE 61 30 Bar 30 Bar 30 Bar 30 Bar
Port Y1 (435 PSI) (435 PSI) (435 PSI) (435 PSI)
SAE 62 350 Bar 350 Bar 350 Bar 350 Bar
Ports A, B (5075 PSI) (5075 PSI) (5075 PSI) (5075 PSI)
SAE 62 30 Bar 30 Bar 30 Bar 30 Bar
Port Y1 (435 PSI) (435 PSI) (435 PSI) (435 PSI)

D Pressure Ranges
Nominal Flow
105 Bar (1523 PSI), 210 Bar (3045 PSI), 350 Bar (5075 PSI)
90 LPM 300 LPM 600 LPM 600 LPM
(23.8 GPM) (79.4 GPM) (158.7 GPM) (158.7 GPM)
Fluid Hydraulic oil as per DIN 51524 to 51525
Fluid Temperature -20°C to +80°C (-4°F to +176°F)
Viscosity  Permitted 10 to 650 cSt / mm2/s (46 to 3013 SSU)
Recommended 30 cSt / mm2/s (139 SSU)
Filtration ISO Class 4406 (1999) 18/16/13 (acc. NAS 1638: 7)
Electrical (Solenoid)
Duty Ratio 100%
Solenoid Connection Connector as per EN175301-803
Protection Class IP65 in accordance with EN60529 (plugged and mounted)
Code G0R G0Q GAR GAG W30 W31
Supply Voltage 12V 24V 98V 205V 110V at 50Hz/ 220V at 50Hz/
120V at 60Hz 240V at 60Hz
Tolerance Supply Voltage +5 to -10 +5 to -10 +5 to -10 +5 to -10 ±5 ±5
Power Consumption Hold 31W 31W 31W 31W 78W 78W
In Rush 31W 31W 31W 31W 264W 264W
Response Time Energized / De-energized AC 20/18ms, DC 46/27 ms
Maximum Switching Frequency AC up to 7200 switchings/hour; DC up to 16,000 switchings/hour
Coil Insulation Class H (180°C) (356°F)

Performance Curves

D70 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA
Catalog MSG14-2500/US Pressure Relief Valves
Dimensions Series R5V

Inch equivalents for millimeter dimensions are shown in (**)


2-Port Note: 2-port bodies are being phased out.

a s e O u t D

Ph
Seal Kits
Size Nitrile Fluorocarbon
06 S16-91850-0 S16-91850-5
08 S16-91851-0 S16-91851-5
10 S16-91852-0 S16-91852-5

SAE 61
Size B1 H1 H2 H3 H4 L1 L2 L3 d1 d2
60.0 131.6 37.0 47.6 90.0 24.6 22.2 152.0 19.0 10.5
06
(2.36) (5.18) (1.46) (1.87) (3.54) (0.97) (0.89) (5.98) (0.75) (0.41)
60.0 137.6 45.0 52.4 96.0 26.5 26.2 171.0 25.0 10.5
08
(2.36) (5.42) (1.77) (2.06) (3.78) (1.04) (1.03) (6.73) (0.98) (0.41)
75.0 150.6 48.0 58.7 109.0 34.0 30.2 179.0 32.0 12.5
10
(2.95) (5.93) (1.89) (2.31) (4.29) (1.34) (1.19) (7.05) (1.26) (0.49)

Port Size
Port Function
R5V06 R5V08 R5V10
A Pressure 3/4" SAE 61 1" SAE 61 1-1/4" SAE 61
B Tank 3/4" SAE 61 1" SAE 61 1-1/4" SAE 61
Y1 External Drain SAE 4

D71 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA
Catalog MSG14-2500/US Pressure Relief Valves
Dimensions Series R5V

Inch equivalents for millimeter dimensions are shown in (**)


3-Port
Seal Kits
Size Nitrile Fluorocarbon
06 S16-91850-0 S16-91850-5
08 S16-91851-0 S16-91851-5
10 S16-91852-0 S16-91852-5
12 S26-27421-0 S26-27421-5

SAE 61
Size B1 B2 H1 H2 H3 H4 H5 H6 L1 L2 L3 L4 L5 d1 d2 d3 t1
60.0 22.2 119.0 28.0 22.2 81.0 41.6 47.6 50.3 47.6 63.0 56.0 152.0 19.0 10.5 19.0 20.0
06
(2.36) (0.87) (4.69) (1.10) (0.87) (3.19) (1.64) (1.87) (1.98) (1.87) (2.48) (2.20) (5.98) (0.75) (0.41) (0.75) (0.79)
60.0 26.2 141.0 29.0 26.2 103.0 47.0 52.4 55.8 52.4 65.0 58.0 149.0 25.0 10.5 25.0 23.0
08
(2.36) (1.03) (5.55) (1.14) (1.03) (4.06) (1.85) (2.06) (2.20) (2.06) (2.56) (2.28) (5.87) (0.98) (0.41) (0.98) (0.91)
75.0 30.2 151.0 34.5 30.2 113.0 64.0 58.7 57.8 58.7 61.0 62.0 150.5 32.0 12.5 32.0 22.0
10
(2.95) (1.19) (5.94) (1.36) (1.19) (4.45) (2.52) (2.31) (2.28) (2.31) (2.40) (2.44) (5.93) (1.26) (0.49) (1.26) (0.87)
80.0 35.7 178.0 34.0 35.7 140.0 73.0 69.8 37.3 69.8 92.5 55.2 171.2 38.0 13.5 38.0 27.0
12
(3.15) (1.41) (7.01) (1.34) (1.41) (5.51) (2.87) (2.75) (1.47) (2.75) (3.64) (2.17) (6.74) (1.50) (0.53) (1.50) (1.06)
SAE 62
Size B1 B2 H1 H2 H3 H4 H5 H6 L1 L2 L3 L4 L5 d1 d2 d3 t1
60.0 23.8 119.0 28.0 23.8 81.0 41.6 50.8 50.3 50.8 63.0 56.0 152.0 19.0 10.5 19.0 20.0
06
(2.36) (0.94) (4.69) (1.10) (0.94) (3.19) (1.64) (2.00) (1.98) (2.00) (2.48) (2.20) (5.98) (0.75) (0.41) (0.75) (0.79)
60.0 27.8 141.0 29.0 27.8 103.0 47.0 57.2 55.8 57.2 65.0 58.0 149.0 25.0 12.5 25.0 22.0
08
(2.36) (1.09) (5.55) (1.14) (1.09) (4.06) (1.85) (2.25) (2.20) (2.25) (2.56) (2.28) (5.87) (0.98) (0.49) (0.98) (0.87)
75.0 31.8 151.0 34.5 31.8 113.0 64.0 66.7 57.8 66.7 61.0 62.0 150.5 32.0 13.5 32.0 24.0
10
(2.95) (1.25) (5.94) (1.36) (1.25) (4.45) (2.52) (2.63) (2.28) (2.63) (2.40) (2.44) (5.93) (1.26) (0.53) (1.26) (0.94)
80.0 36.5 178.0 34.0 36.5 140.0 73.0 79.4 37.3 79.4 92.5 55.2 171.2 38.0 17.0 38.0 33.0
12
(3.15) (1.44) (7.01) (1.34) (1.44) (5.51) (2.87) (3.13) (1.47) (3.13) (3.64) (2.17) (6.74) (1.50) (0.67) (1.50) (1.30)
Port size
Port Function
R5V06 R5V08 R5V10 R5V12
A (2) Pressure 3/4" SAE 61/62 1" SAE 61/62 1-1/4" SAE 61/62 1-1/2" SAE 61/62
B Tank 3/4" SAE 61/62 1" SAE 61/62 1-1/4" SAE 61/62 1-1/2" SAE 61/62
X1 External pilot port * SAE 4
Y1 External drain SAE 4
M Pressure gauge SAE 4

D72 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA
Catalog MSG14-2500/US Pressure Relief Valves
Dimensions Series R5V

Inch equivalents for millimeter dimensions are shown in (**)


with Vent Function

Vent Valve Seal Kits


Nitrile Fluorocarbon
DC Solenoid
S26-58515-0 S26-58515-5
AC Solenoid
S26-35237-0 S26-35237-5
Note: 2-port bodies are being phased out.
R5V 2-Port R5V 3-Port
Code
Internal Drain External Drain Internal Drain External Drain

11

e O u t
Phas
09

D73 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA

You might also like