Amphibious all-terrain

vehicle with increased

loading capacity
From workshop The ATVs participated In 2015, we designed Burlak 6x6, expedition
in the expeditions all-terrain vehicle.
to mass to the Nether-Polar Urals:
In 2016, right after successful tests
production in the Nether-Polar Urals and the Kara Sea,
Transarctic Automobile Expedition
autoarctic.ru travelers from Latvia bought the ATV.

In 2017, we improved design and operating

The North is Near
characteristics of the ATV; developed
close2north.com the cargo and passenger modification at requests
of customers from the Arctic regions.

In 2018, with the increase in demand,

we launched mass production of the ATVs.

In 2019, we created a shortened 4x4 model

to expand the scope of the ATVs’ use.

In 2020, the first Burlak ATV began operating

in Antarctica. It succeeded in its tasks, so our
partners ordered six more all-terrain vehicles.
In September, the new Burlak ATVs were sent
to the South Pole. Moreover, in 2020, Makar
Offroad began adapting Burlak ATVs to operate
in countries with hot climates. A total of 13
modifications have been certified so far.

In 2021, we opened a new plant in Kurgan,

and produced the following modifications: Burlak
with a drilling rig, Burlak with a truck mounted
crane, Burlak for the Ministry of Emergency
Situations’ needs, Burlak ambulance vehicle
and fire-fighting Burlak. We also carried
out operational tests under various conditions.
Specifications Loading capacity Cummins 2.8 ISF engine
on solid ground. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 t of load
Type Turbodiesel
on weak ground and afloat. . . . . . . . . . . . . . 1.5 t of load
Power 150 hp
Displacement
6X6 WHEEL ARRANGEMENT Torque 360 Nm at 1,800 rpm
WITH THE ABILITY TO LOCK Total displacement . . . . . . . . . . . . . . . . . . . . . . . 8,800 kg*
Total wheel displacement. . . . . . . . . . . . . . . . . . . 7,200 kg Capacity 2,800 сm3
ALL AXES
Total displacement
of floats (option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 kg Starting preheater 220 V, 2 kW
Displacement of the sealed hull. . . . . . . . . . . . . 1,000 kg “Binar”, 5 kW

* 4 t ± 100 kg + 2 t + 120 kg х 9 people + 7,180 kg

8,800 – 7,180 = 1,620 kg (reserve of buoyancy) Transmission
Speed Gearbox manual five-speed
Dimensions Maximum speed. . . . . . . . . . . . . . . . . . . . . . up to 70 km/h
Central transfer two-stage,
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,380 mm Cruising speed at 2,000 rpm . . . . . . . . . . . . . . . 50 km/h
case three-shaft
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,900 mm Minimum (1 reduced by 1,000 rpm) . . . . . . . . . 1.5 km/h
Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,200 mm Speed afloat without water propeller, Transmission advanced 1/1
Height of the interior. . . . . . . . . . . . . . . 1,850 mm due to the wheels. . . . . . . . . . . . . . . . . . . . . . up to 3 km/h modes reduced 1/2
Wheel outside diameter. . . . . . . . . . . . . 1,750 mm Speed afloat with propeller . . . . . . . . . . . . up to 6 km/h
Width of the wheels . . . . . . . . . . . . . . . . . 720 mm
Wheel inside diameter. . . . . . . . . . . . . . . . . . . . 32’’ Undercarriage

6Х6
Wheel track. . . . . . . . . . . . . . . . . . . . . . . . 2,120 mm
Road clearance. . . . . . . . . . . . . . . . . 700–750 mm Suspension independent, double
wishbone, spring,
Weight suspension travel 200 mm
Curb weight . . . . . . . . . . . . . . . . . . . . . . 4 t ± 100 kg Steering gear without direct connection,
Weight when vehicle is fully loaded . . . . . . . . 7 t due to hydraulic cylinder
Ground pressure
when vehicle is fully loaded. . . . . . . 0.12 kg/cm2 Brakes hydraulic, two-circuit

Fuel
Fuel tank capacity. . . . . . . . . . . . . . . . . . . . . . . 400 l Configuration includes Body
Additional tanks
• Batteries • Positive locking of all wheels Layout with front engine, access
(are mounted individually) . . . . . . . . . . . . . . 320 l
BOSCH-S4 028, through the cross-axle from the passenger
Fuel consumption 95 A·h, 2 pcs differential compartment
on solid ground. . . . . . . . . . . . . . 26–30 l/100 km • Inverter • Tire pressure control Skinning aluminum sheet
off-road. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6 l/h 1.5 kW/220V system in each wheel up to 2 mm
idle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6–0.8 l/h separately
Dimensions and
Manoeuvrability

Climbing angle 45° Using the tire pressure Without using

adjustment system the system
Modifications EXPEDITION MODIFICATION
of 6x6 model • Fire-fighting and search-and-rescue
• For transportation of suspects
and accused persons
• Special purpose vehicle
for the Ministry of Defence

Vehicles can be custom-made. CARGO MODIFICATION

If you change the standard configuration,
the price will be different.
• Crew change vehicle
• With cargo transportation platform
• With a workshop module
POSSIBLE DESIGN CHANGES • Ambulance vehicle

Mounting of additional fuel tanks,

160 liters each.
Mounting of the shower/steam bath and/or
portable (chemical) toilet in the back of the
vehicle body of the expedition model. INDUSTRIAL MODIFICATION
• With a drilling rig

ADDITIONAL EQUIPMENT
• With a fueling module
• For transportation of hazardous cargo
Fridge
• With a truck mounted crane
Floats for wheel rims, 6 pcs • With a hydraulic hoist
Snow-melting device • With container for transportation
Kitchen area with various components of explosives
Expedition
Modification
PRICE FOR THE BASIC
CONFIGURATION

USD 250,000
(INCLUDING VAT)

up to 2.5 km/h
picks up the vehicle with
a 1,5 t of cargo on board,
floating with help
of wheels only

up to 6 km/h
is the speed that the
amphibious vehicle picks up
floating, equipped with
a propeller Vehicles were tested
on winter roads
of the Nether-Polar
Urals, in the salty
0.12 kg/cm2 water of the Kara Sea
is the ground pressure, and in the swamps
so that the vehicle of Siberia
does not damage soil
Expedition Removable ladder
to the roof
Modification Roof rails for securing cargo
Window =
on the roof, up to 150 kg/4 m²
emergency Side rooflight
BODY AND EQUIPMENT exit
Double glazing
OUTSIDE
All-metal body with
aluminum skinning

Main fuel tank

8 seats
for comfortable stay
The door to enter
the cab and the interior
in expeditionary
conditions

Folding ladder

15
to enter the interior Spotlight

passenger seats LED lights

Yellow LED fog lamp, 180 W

Four-layer low-pressure
tires with pumping from
the passenger compartment

Rear lamp —
Winch retractable both forward 2 headlights
and backward through the pulley block, Platform
rated pulling force is 4,300 kg for the trailer
hitch
Expedition 220 V socket Storage compartment
(shower installation is possible)
Modification Snow-melting device

INTERIOR AND EQUIPMENT

Folding seat, 220 V, 12 V
INSIDE Stove hood, 2 pcs socket
folding table
Emergency/ Emergency/
ventilation hatch ventilation hatch
Diode lamps,
USB, 2 pcs, 2 pcs
12 V sockets, 3 pcs

Heating and ventilation

Ventilation hatches, Planar autonomous
heaters, heaters driven by the engine
cooling system. Inverter,
220 V 1.5 kW
Sockets
USB connectors and electrical sockets.

Storage of things
Lockers under the folding seats, shelves,
storage compartment.

Kitchen area
Folding table and stove hood in the kitchen
Planar, Planar,
area. Snow-melting device providing
4 kW 4 kW
from 15 liters of hot water within an hour
without additional energy consumptions. Tool kit Fluid interior Door
heater to the cargo
Comfort+ compartment
Additional options: portable toilet, shower Fluid heater
Additional fuel
or sauna for up to 2 people (with heating Main fuel tank,
tanks, 160 L,
Additional fuel
up to 70 °C), freezer. 80 L
tanks, 160 L, 2 pcs 2 pcs
 Expedition
Modification Hanging
hammocks
INTERIOR AND EQUIPMENT on the left
INSIDE and right provide
two additional
berths.

The interior is insulated with isolon 30 mm

thick and trimmed with gray carpet which
8
berths Cargo
is synthetic felt. area
in the layout Passenger compartment Sleeper compartment
The configuration includes EVA floor mats. for sleeping 283 сm 205 сm 125 сm

Kitchen area with a kitchen hood Ergonomic driver and forwarder seats Sleeper compartment
Cargo
Modification
ALL-METAL BODY
CONFIGURATION

USD 230,000
(INCLUDING VAT)

3t
loading capacity on solid
ground, and floating Burlak
can transport up to 1.5 ton
of cargo and passengers

50 km/h
cruising speed
at 2,000 rpm

Low-pressure tires
are designed
0.12 kg/сm 2
to move on the
ground pressure, ground and snow.
due to which the vehicle Not recommended
does not damage soil on paved roads
Cargo
Modification Roof rails for securing cargo
Window =
on the roof, up to 150 kg/4 m2
emergency Side rooflight
BODY AND EQUIPMENT Double glazing
exit
OUTSIDE All-metal body
with aluminum
skinning (optionally
Removable ladder
tilt-covered)
to the roof

Door for entering the

cabin and the interior

12.4 m3
volume of the cargo area

3t Folding ladder to enter

loading capacity
the interior Spotlight

LED lights
Rear lamp —
2 lights
for lighting
the loading area
Yellow LED fog lamp

Four-layer low-pressure
tires with pumping from the
passenger compartment
Single-wing
door, 120 cm
Winch that is able to retract both
forward and backward through
the block; estimated pulling force Platform
is 4,300 kg for the trailer
hitch
Cargo
Modification Body finishing:
4 mm plywood
with lining
INTERIOR AND EQUIPMENT Wire hole, 220 V
Stove hood, 220 V socket,
INSIDE folding table 12 V socket
Jack
Emergency / Diode Diode lamp
ventilation hatch 220 V socket
lamps,
2 pcs
USB, 2 pcs,
12 V sockets, 3 pcs

The cabin is equipped with a ventilation

hatch, Planar autonomous heater
and three stoves driven by the engine Inverter,
cooling system. 220 V,
1.5 kW
USB connectors and electrical sockets
are provided.
Fluid heater,
Lockers are placed under folding passenger 2 pcs
seats. The kitchen area is equipped
with a folding table and a stove hood.

The floor of the cargo compartment

in the basic configuration is covered
with bakelite plywood, the walls
and ceiling are covered with 4 mm Planar,
plywood with an antiseptic coating. 4 kW

The body in the basic configuration Tool kit Floor material:

Main fuel tank, bakelite
is all-metal, but it can be changed 80 L plywood, 9 mm
to tilt-covered. Fluid heater
Optional fuel tanks, Additional fuel
160 L, 2 pcs tanks, 160 L, 2 pcs
 Cargo
Modification
INTERIOR AND EQUIPMENT
INSIDE

6
comfortable Interior Cargo area
passenger seats
283 сm 327 сm

Seats are transformed into a sleeper compartment Ergonomic driver seat Body finishing is made of 4 mm
for four passengers plywood with lining
Industrial
Modification
PLATFORM FOR EQUIPMENT
INSTALLATION

USD 200,000
(INCLUDING VAT)

4 crew members
can live comfortably
in a warm all-terrain vehicle
for a long time

from –50 to +40 С°

temperature operating
conditions of low pressure tires
It is possible
to mount equipment
up to 2 tones on the platform in the rear
part of the snow and
is the possible weight
swamp-going vehicle
of installed equipment
or inside it
Industrial
Modification Window = Double glazing Body opened
emergency or tilt-covered
BODY AND EQUIPMENT exit
OUTSIDE

The platform can be used

to mount customer’s equipment.

The loading capacity on solid

ground is up to 3 tons.

This is the project of the UBGM-1M

drilling rig placement.
Spotlight

LED lights
The following equipment
can be mounted:
• Drilling rig Yellow LED fog lamp
• Fueling module
• Floats for wheel rims, 6 pcs
• For transportation of hazardous cargo Four-layer low-pressure tires with pumping
• Snow-melting device from the passenger compartment
• Truck mounted crane
• Hydraulic hoist
Winch (retractable both forward
• Shot-point container and backward through the pulley block),
rated pulling force is 4,300 kg
Burlak
With a Truck
Mounted Crane

The ATV can transport cargo

and equipment to remote regions,
as well as perform loading
and unloading without involving
additional equipment.

2,000 kg
loading capacity
on solid ground

70 km/h
maximum speed

6.5 m
maximum lifting
height
Specifications Fuel consumption
on solid ground. . . . . . . . . . . . . . . . . . . . . 26–30 l/100 km
Cummins 2.8 ISF engine

off-road. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10 l/h Type Turbodiesel

BURLAK 6Х6 WITH A TRUCK idle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6–0.8 l/h Power 150 hp
MOUNTED CRANE
Loading capacity Torque 360 Nm at 1,800 rpm
on solid ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 t
Capacity 2,800 сm3
on weak ground and afloat. . . . . . . . . . . . . . . . . . . . . 0.75 t
Starting preheater 220 V, 2 kW
Displacement
Total displacement . . . . . . . . . . . . . . . . . . . . . . . . 8,800 kg “Binar”, 5 kW

Speed
Transmission
Maximum speed. . . . . . . . . . . . . . . . . . . . . . up to 70 km/h
Cruising speed at 2,000 rpm.. . . . . . . . . . . . . . . 50 km/h Gearbox manual five-speed
Dimensions Minimum (1 reduced by 1,000 rpm) . . . . . . . . . 1.5 km/h
Speed afloat without water Central transfer two-stage, three-shaft
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,380 mm case
propeller, due to the wheels. . . . . . . . . . . . up to 3 km/h
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,900 mm
Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,200 mm Transmission advanced 1/1
Height of the interior. . . . . . . . . . . . . . . 1,850 mm
Wheel outside diameter. . . . . . . . . . . . . 1,750 mm
Width of the wheels . . . . . . . . . . . . . . . . . 720 mm
6Х6 modes reduced 1/2

Wheel inside diameter. . . . . . . . . . . . . . . . . . . . 32’’ Undercarriage

Wheel track. . . . . . . . . . . . . . . . . . . . . . . . 2,120 mm Suspension independent, double
Road clearance. . . . . . . . . . . . . . . . . 700–750 mm wishbone, spring,
suspension travel 200 mm
Cargo platform dimensions
Steering gear without direct
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,500 mm
connection, due to
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,250 mm
hydraulic cylinder
Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 mm
Brakes hydraulic, two-circuit
Weight
KMU-3K truck mounted crane
Curb weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 t
Number of hydraulic sections . . . . . . . . . . . . . . . . . . . . . . 1 Body
Maximum allowable weight. . . . . . . . . . up to 7 t
Load moment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.92 t х m
Ground pressure Layout with front engine, access
Maximum loading capacity. . . . . . . . . . . . . . . . . . . 995 kg
when vehicle is fully loaded. . . . . . 0.18 kg/cm2 from the passenger
Loading capacity at maximum outreach . . . . . . 350 kg
Maximum boom outreach . . . . . . . . . . . . . . . . . . . 6.78 m compartment
Fuel tanks capacity
Operating ambient temperature. . . . . . . . . -40...+40 °C Skinning aluminum sheet
Basic version . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 l Maximum lifting height . . . . . . . . . . . . . . . . . . . . . . . . 7.9 m up to 2 mm
With additional tanks. . . . . . . . . . . . . up to 800 l Control method . .. . . . . . . . . . . . . . . . . . . . . . . . . . . manual
Burlak
Ambulance Vehicle

The ATV can be designed

to conform to any class of ambulances.

Class A:
a vehicle for transporting non-emergency
patients, accompanied by medical staff.

Class B:
a vehicle for treatment and emergency
medical care provided by a medical
team, transportation and monitoring
of patients at the pre-hospital stage.

Class C (critical care vehicle):

a vehicle for treatment and emergency
medical care provided by a resuscitation
team, transportation and monitoring
of patients at the pre-hospital stage.
Fire-Fighting and Forest patrol complex based
on the Burlak snow and swamp-going vehicle
Search-and-Rescue
Burlak

The snow and swamp going-vehicle

is designed to deliver fire-fighting crews
and equipment to the places where fires
are extinguished.

It can take part in deployment

and elimination of fires.

There are two configuration options:

fire-fighting and forest patrol.
Modifications Three modifications of the all-terrain
vehicle are produced in series: industrial,
The Vezdehody “Burlak“ company
has also developed several specialized
expedition, and cargo and passenger. variants of the chassis modification.

Model 02.001 Model 02.002 Model 02.003

Passenger Burlak Cargo and Passenger Burlak Burlak with a drilling rig

Model 02.004 Model 02.005 Model 02.007

Burlak with a workshop module Burlak with a fueling module Burlak ambulance vehicle

Model 02.008 Model 02.010 Model 02.011

Fire-fighting and search-and-rescue Burlak Burlak with a truck mounted crane Burlak with a hydraulic hoist
4x4 Expedition
Modification
USD 250,000
(INCLUDING VAT)

2019 year
Production startup
of the new model

1.5 ton
of cargo + crew —
carrying capacity
of 4-wheel Burlak

Forest roads, swamps,

4-6 berths brushwood, loose
rocks — all this can
Hanging hammocks be overcome by 4x4
on the left and right provide Burlak
two extra berths
Specifications Loading capacity Cummins 2.8 ISF engine
on solid ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 t
Type Turbodiesel
on weak ground and afloat. . . . . . . . . . . . . . . . . . . . . 0.75 t
4X4 WHEEL ARRANGEMENT
Power 150 hp
WITH THE ABILITY TO LOCK Wheel displacement
ALL AXES Total wheel displacement. . . . . . . . . . . . . . . . . . 6,200 kg Torque 360 Nm at 1,800 rpm
Capacity 2,800 сm3
Speed
Maximum speed. . . . . . . . . . . . . . . . . . . . . . up to 70 km/h Starting 220 V, 2 kW
Cruising speed preheater
“Binar”, 5 kW
(at 2,000 rpm).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 km/h
Minimum speed
(1 reduced by 1,000 rpm) . . . . . . . . . . . . . . . . . . . 1.5 km/h Transmission
Speed afloat without water propeller,
Dimensions due to the wheels. . . . . . . . . . . . . . . . . . . . . . up to 3 km/h Gearbox Manual, five-speed
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,650 mm Central two-stage,
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,900 mm transfer case three-shaft
Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,200 mm
Transmission Advanced 1/1

4Х4
Height of the interior. . . . . . . . . . . . . . . 1,850 mm
modes Reduced 1/2
Wheel outside diameter. . . . . . . . . . . . . 1,750 mm
Wheel width. . . . . . . . . . . . . . . . . . . . . . . . . 720 mm
Wheel inside diameter. . . . . . . . . . . . . . . . . . . . 32’’
Wheel track. . . . . . . . . . . . . . . . . . . . . . . . . 2,120 mm Undercarriage
Road clearance. . . . . . . . . . . . . . . . . 700–750 mm
Suspension independent, double
wishbone, spring,
Weight
suspension travel 200 mm
Curb weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 t
Weight when Steering without direct connection,
vehicle is fully loaded. . . . . . . . . . . . . . up to 4.7 t control due to hydraulic cylinder
Ground pressure when Brakes hydraulic, two-circuit
vehicle is fully loaded. . . . . . . . . . . . . 0.12 kg/cm2

Fuel
The package includes Body
Main tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 l
Additional tanks, up to 4 pcs . . . . . . . 160 l each • Batteries BOSCH-S4 • Inverter 1.5 kW/220V Layout with front engine, access
028, 95 A·h, 2 pcs from the passenger
Fuel consumption • Tire pressure control compartment
on solid ground. . . . . . . . . . . . . . . 19–22 l/100 km • Positive locking of all system in each wheel
off-road. . . . . . . . . . . . . . . . . . . . . . . . . . 4–6 l/hour wheels through the separately Skinning aluminum sheet
idle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6–0.8 l/hour cross-axle differential up to 2 mm
4x4 Expedition
Modification Removable ladder Roof rails for securing cargo
Window =
to the roof on the roof, up to 150 kg/4 m2
emergency Double glazing
VEHICLE BODY AND OUTSIDE exit
EQUIPMENT
All-metal body with
aluminum skinning

The door to enter

the cab and the
passenger
Main design features of Burlak 4x4: compartment
• one 4,025-mm wheelbase,
• one (central) transfer box,
• part-time 4WD,
• brakes on both the front and rear axles,
Folding ladder
• improved manoeuvrability for driving
to enter the interior
in taiga, forest-tundra and through
mountain stone runs.

LED lights

Yellow LED fog lamp

Four-layer low-pressure
tires with pumping from
the passenger compartment

Winch retractable both forward and

backward through the pulley block, Rear lamp, 2 pcs Platform
rated pulling force — 4,300 kg for the trailer
hitch
 4x4 Expedition The second tier of berths
(hammocks) is easily removed,
Modification and the shelf can be transformed
into a couch for sitting.
INTERIOR AND EQUIPMENT The hole for 220 V cable
INSIDE is designed for pre-heating
of the engine and power supply
of electrical systems
from the external network.

The option is suitable for off-road

traveling with a small group of people.

The vehicle has enough space for luggage:

shelves, nets, hooks, lockers under
the seats.

Folding table, hood in the daytime form a kitchen area, and it can be transformed Ventilation hatch,
into sleeping space convenient control in the cabin
Trailers

Models
Single axle
(loading capacity 1.2 tons)
from USD 13,500, including VAT
Double axle
(loading capacity 2.5 tons)
from USD 20,000, including VAT

System
of pumping wheels
from the interior of the self-propelled vehicle

Specifications of single axle trailer

Overall dimensions, L x W x H 2,600 mm x 1,150 mm x 1,520 mm

Weight 600 kg
Loading capacity 1,200 kg
Volume 3.3 m3
Tires 1,750x72,032 (725/6 532)
Burlak NC403 tubeless and 108E
Low-Pressure
Tires

Specifications of tires
1750-720*32 4PR 90-95 ru

Tire type Tubeless, diagonal,

low pressure
Number of layers 4
Diameter 1,750 mm
Profile width 720 mm
Seat size 2 inches
Trailing edge height 20 mm
Load index 118 (1,320 kg)
Minimum 0.12 kg/cm3
ground pressure
Maximum speed 70 km/h
Operating temperature -55... +40 °С
Weight 110 kg
Total wheel 7.2 t The four-layer low-pressure tires of our own design allow the vehicle to move
displacement easily on loose snow, soft ground, sand and swamps. They do not damage
the soil and vegetation and can be used for winter roads.
Order
a test drive
A free trip will allow you to see
the capabilities of the ATV
for yourself

All information, including equipment

and prices, is for information purposes only
Ask your questions
(3522) 200-555
and does not constitute a public offer.
Phone number:
Products are certified.
E-mail: sales@burlakoffroad.ru

burlakoffroad.ru