Product Overview
Wire mount plug
Applied wire
Number of
Appearance Model Cover color Norminal cross Cover Reference
pins
section area(mm²) diameter(mm)
CNE-P03-WT 3
Transparent ø 0.6 to 0.8
CNE-P04-WT 4
CNE-P03-YG 3 0.05 to 0.08
Yellow-Green ø 0.8 to 1.0
CNE-P04-YG 4 AWG30 to 28
CNE-P03-VT 3
Violet ø 1.0 to 1.2
CNE-P04-VT 4
CNE-P03-RE 3
Red ø 0.8 to 1.0
CNE-P04-RE 4
CNE-P03-YW 3 0.13 to 0.21
Yellow ø 1.0 to 1.2 A-3 to 5
CNE-P04-YW 4 AWG26 to 24
CNE-P03-OG 3
Orange ø 1.2 to 1.6
CNE-P04-OG 4
CNE-P03-GN 3
Green ø 1.0 to 1.2
CNE-P04-GN 4
CNE-P03-BL 3 0.32 to 0.5
Blue ø 1.2 to 1.6
CNE-P04-BL 4 AWG22 to 20
CNE-P03-GY 3
Gray ø 1.6 to 2.0
CNE-P04-GY 4
Wire mount socket
Applied wire
Number of
Appearance Model Cover color Norminal cross Cover Reference
pins
section area(mm²) diameter(mm)
CNE-S03-WT 3
Transparent ø 0.6 to 0.8
CNE-S04-WT 4
CNE-S03-YG 3 0.05 to 0.08
Yellow-Green ø 0.8 to 1.0
CNE-S04-YG 4 AWG30 to 28
CNE-S03-VT 3
Violet ø 1.0 to 1.2
CNE-S04-VT 4
CNE-S03-RE 3
Red ø 0.8 to 1.0
CNE-S04-RE 4
CNE-S03-YW 3 0.13 to 0.21
Yellow ø 1.0 to 1.2 A-3 to 5
CNE-S04-YW 4 AWG26 to 24
CNE-S03-OG 3
Orange ø 1.2 to 1.6
CNE-S04-OG 4
CNE-S03-GN 3
Green ø 1.0 to 1.2
CNE-S04-GN 4
CNE-S03-BL 3 0.32 to 0.5
Blue ø 1.2 to 1.6
CNE-S04-BL 4 AWG22 to 20
CNE-S03-GY 3
Gray ø 1.6 to 2.0
CNE-S04-GY 4
Board mount socket
Number of
Appearance Model Lines Connector PCB Reference
pins
CNE-B03 3
1
CNE-B04 4
Fender
CNE-B203 3 Wire plated-through hole
2 mount ●Hole dia.: 1.0 mm A-3 to 5
CNE-B204 4 plug ●Thickness:
1.0-2.2 mm
CNE-B403 3
4
CNE-B404 4
A-2
Sensor Connector
Sensor connector
Features (A)
Sensor
connector
■Wire mount plug/socket (B)
Compact and highly reliable of pressure welding connector I/O terminal
Enables to connect wires as wire mount plug/socket block
Different 9 colors of cover by wire diameter (C)
Visible wiring status with translucent cover I/O cable
■Board mount socket (D)
Enables to insert 4EA, 2EA, or 1EA wire mount plugs Remote I/O
terminal block
Contact placed in mold against electric shock and short-circuit
Mountable on board closely
■Commons
Significantly reduces connection time and effort
Wide products range for various wires
Compact and high density installation with 2 mm of contact pitch
Compliance with e-CON
Max. 3 A of current capacity by a pin
Ordering information
CNE P 03 WT CNE B 2 03
Cover color(wire specifications)
Pins 03 3-pins
※‘Cover color and wire specifications’
(Refer to A-4 page) 04 4-pins
Pins 03 3-pins No-mark 1-line
Lines
04 4-pins 2 2-line
Connector type
4 4-line CNE
P Wire mount plug
Connector type
S Wire mount socket B Board mount socket
Item Item
CNE Sensor connector CNE Sensor connector
Specifications
Type Wire mount plug Wire mount socket Board mount socket
Model CNE-P - CNE-S - CNE-B
Connector Board mount socket/Wire mount socket Wire mount plug Wire mount plug
Cable AWG 30 to 20(ø 0.6 to ø 2 .0) ─
Appli-
cation Fender plated-through hole,
PCB ─ Hole dia. : 1.0 mm,
PCB thickness : 1.0 to 2.2 mm
Rated voltage Max. 250 VAC/DC
Rated current Max.3.0 A
Temperature -20 to 85 ℃(applying 1 A), -20 to 75 ℃(applying 2 A), -20 to 60 ℃(applying 3 A)
Humidity 40 to 80%RH
Terminal retention 1.4 kgf min.
Pressure strength UAWG20 : 1.0 kgf min. UAWG24 : 0.8 kgf min. UAWG30 : 0.5 kgf min.
Extraction Min. 0.49 N(50 gf)/pin
Insertion Max. 1.96 N(200 gf)/pin
Dieleectric strength 1,000 VAC for 1 min.(between terminals)
Insulated resistance Min. 1,000 MΩ(between terminals)
Contact resistance 0.05 Ω max. (short-current : 1 mA, max. open voltage : 20 mV)
Body : PCABS(UL94V-0), Terminal : C5210(Gold 0.2 ㎛), Body : PCABS(UL94-V0),
Material
Case : PC(UL94-V0) Terminal : C5210(Gold 0.2 ㎛)
A-3
CNE Series
Cover color and wire specifications
Applied wire specifications
Cover color 3-pin 4-pin Norminal cross section
Cover diameter(mm)
area(mm²)
Transparent(WT) CNE- 03-WT CNE- 04-WT ø 0.6 to 0.8
0.05 to 0.08
Yellow-Green(YG) CNE- 03-YG CNE- 04-YG ø 0.8 to 1.0
(AWG30 to 28)
Violet(VT) CNE- 03-VT CNE- 04-VT ø 1.0 to 1.2
Red(RE) CNE- 03-RE CNE- 04-RE ø 0.8 to 1.0
0.13 to 0.21
Yellow(YW) CNE- 03-YW CNE- 04-YW ø 1.0 to 1.2
(AWG26 to 24)
Orange(OG) CNE- 03-OG CNE- 04-OG ø 1.2 to 1.6
Green(GN) CNE- 03-GN CNE- 04-GN ø 1.0 to 1.2
0.32 to 0.5
Blue(BL) CNE- 03-BL CNE- 04-BL ø 1.2 to 1.6
(AWG22 to 20)
Gray(GY) CNE- 03-GY CNE- 04-GY ø 1.6 to 2.0
※ : P(Wire mount plug), S(Wire mount socket)
Dimensions
◎Wire mount plug ◎Wire mount socket
6
(unit: mm) (unit: mm)
A A
16
23.5
After
squeezing After
5.9
6.5
squeezing
Pins Model A B Pins Model A B
3 CNE-P03- 10.5 14.5 3 CNE-S03- 13.8 11.5
4 CNE-P04- 12.5 16.5 4 CNE-S04- 15.8 13.5
◎Board mount socket (unit: mm)
CNE-B03(1-line×3-pin) CNE-B04(1-line×4-pin)
6.5 6.5
13.8 15.8
13
13
3.2
3.2
3.2 3.2
4
Ø1 6
6 Ø1
2
CNE-B203(2-line×3-pin) CNE-B204(2-line×4-pin)
13 13
13.8 15.8
13
13
6.5 6.5
3.2
3.2
6.5 3.2 6
6
6.5 3.2
4
Ø 6 Ø
1 1
2
A-4
Sensor Connector
◎Board mount socket
CNE-B403(4-line×3-pin) CNE-B404(4-line×4-pin)
(A)
26 26 Sensor
connector
(B)
I/O terminal
13.8 15.8 block
19.5 19.5 (C)
13
13
I/O cable
6.5
3.2
6.5
3.2
(D)
3.2 6.5 3.2
6.5 6
6
4
6 Ø1 Ø1
Remote I/O
terminal block
2
How to squeeze sensor connector
1)Select connector.
Check the wire specifications (conductor section, cover diameter).
Select the proper color of sensor connector(model) by referring to the below table.
Applied wire specifications
Cover color Wire mount plug Wire mount socket Norminal cross section
Cover diameter(mm)
area(mm²)
Transparent(WT) CNE-P -WT CNE-S -WT ø 0.6 to 0.8
0.05 to 0.08
Yellow-Green(YG) CNE-P -YG CNE-S -YG ø 0.8 to 1.0
(AWG30 to 28)
Violet(VT) CNE-P -VT CNE-S -VT ø 1.0 to 1.2
Red(RE) CNE-P -RE CNE-S -RE ø 0.8 to 1.0
0.13 to 0.21
Yellow(YW) CNE-P -YW CNE-S -YW ø 1.0 to 1.2
(AWG26 to 24) CNE
Orange(OG) CNE-P -OG CNE-S -OG ø 1.2 to 1.6
Green(GN) CNE-P -GN CNE-S -GN ø 1.0 to 1.2
0.32 to 0.5
Blue(BL) CNE-P -BL CNE-S -BL ø 1.2 to 1.6
(AWG22 to 20)
Gray(GY) CNE-P -GY CNE-S -GY ø 1.6 to 2.0
※ : Number of pins (03: 3-pin, 04: 4-pin)
※The proper sensor connector may be different by conductor of wire.
※Cover diameter of applied wire at connector (at translucent part)
and AWG number of body backside are marked.
2)Insert wires. 4)Check the cover.
Check the pin number and insert wires at the insertion Check the cover which has gaps and is even with the
part of the cover. cover.
Check the wires are inserted at the end of cover.
Wrong (1) Wrong (2)
3)Squeeze the connector. Not enough cover insertion. Not enough cover insertion.
Insert the cover to the body with tools (press fitting plier, etc).
※Press the part of arrows again.
※Squeeze it with tools at the side direction as below figure.
A-5
