Scribd
Upload
256 views1 page

Instruction Sheet Key Fobs 015

This document provides instructions for programming key fobs for various automobile models. It lists vehicle models that can be programmed using the instructions, which involve cycling the ignition while holding the door unlock switch, then pressing both the lock and unlock buttons on each transmitter to program up to four remotes. Some vehicle models require using a professional scan tool, and owners should see their local dealer. The procedure will erase any previously learned transmitters.

Uploaded by

Edson Jalla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
256 views1 page

Instruction Sheet Key Fobs 015

This document provides instructions for programming key fobs for various automobile models. It lists vehicle models that can be programmed using the instructions, which involve cycling the ignition while holding the door unlock switch, then pressing both the lock and unlock buttons on each transmitter to program up to four remotes. Some vehicle models require using a professional scan tool, and owners should see their local dealer. The procedure will erase any previously learned transmitters.

Uploaded by

Edson Jalla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSTRUCTION SHEET

KEY FOB PROGRAMMING INSTRUCTIONS


FOR AUTOMOBILES:
These vehicles can be programmed using the These vehicles require the use of a professional scan
instructions below: tool for programming (see your local GM dealer or
• 2002 Cadillac Escalade ACDelco Professional Service Center):
• 2002 Cadillac Escalade EXT • 2005 Chevrolet Astro
• 2002 Chevrolet Avalanche 1500 • 2005 GMC Safari
• 2002 Chevrolet Avalanche 2500
• 2001-2004 Chevrolet S10
• 2001-2002 Chevrolet Silverado 1500
• 2001-2002 Chevrolet Silverado 1500 HD
• 2001-2002 Chevrolet Silverado 2500
• 2001-2002 Chevrolet Silverado 2500 HD
• 2001-2002 Chevrolet Silverado 3500
• 2001-2002 Chevrolet Suburban 1500
• 2001-2002 Chevrolet Suburban 2500
• 2001-2002 Chevrolet Tahoe
• 2001-2002 GMC Sierra 1500
• 2001-2002 GMC Sierra 1500 HD
• 2001-2002 GMC Sierra 2500
• 2001-2002 GMC Sierra 2500 HD
• 2001-2002 GMC Sierra 3500
• 2001 GMC Sierra C3
• 2001-2004 GMC Sonoma
• 2001-2002 GMC Yukon
• 2001-2002 GMC Yukon XL 1500
• 2001-2002 GMC Yukon XL 2500

PROGRAMMING INSTRUCTIONS
This procedure will erase all previously learned transmitters. Therefore,
they must be relearned as additional transmitters.
You may program up to 4 transmitters, using the following procedure:
1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the door unlock switch.
4. While holding the door lock switch in the unlock position, cycle the
ignition ON, OFF, ON, OFF.
5. Release the door unlock switch. The doors will lock and unlock to
confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button simul-
taneously on one transmitter. After a delay of approximately 15
seconds, the doors will lock and unlock to confirm the programming
of that transmitter.
7. Repeat the previous step to program up to four transmitters.
8. Turn the ignition switch to the RUN position in order to exit the key-
less entry transmitter mode.
9. Operate the transmitter functions in order to verify correct system
operation.

Instruction_Sheet_Key_Fobs_015

You might also like