PV Inverters PowerGate Plus 100 kW
PVS-100 (208 V) PV Inverters | PowerGate Plus 100 kW
PVS-100 (240 V)
PVS-100 (480 V)
PVS-100 (600 V)
AE-100 (400V)
Peak Efficiency 96.7%
Power Efficiency
Power Level Output Power1 Efficiency 2
10% 10 kW 93.2%
20% 20 kW 96.1%
30% 30 kW 96.5%
50% 50 kW 96.7%
75% 75 kW 96.5%
100% 100 kW 96.1%
PowerGate Plus 100 kW Specifications UL/CSA CE
1 2
315V minimum 480V model
Input Parameters
Unparalleled Performance Maximum Array Input Voltage 600 VDC
900 VDC
With their advanced system
PV Array Configuration Positive Ground o o
intelligence, next-generation Edge™
MPPT technology, and industrial-grade Negative Ground o
engineering, PowerGate® Plus inverters Floating
maximize system uptime and power Input Voltage Range (MPPT; Full Power) 315–600 VDC
production, even in cloudy conditions. 420–850 VDC
Edge MPPT Maximum Input Current 331 ADC
Provides rapid and accurate control 248 ADC
that boosts PV plant kilowatt yield Output Parameters
Provides a wide range of operation Output Voltage Range (L-L) 183–229 VAC 208 VAC
across all photovoltaic cell technologies 211–264 VAC 240 VAC
352–440 VAC 400 VAC
Printed Circuit Board Durability 422–528 VAC 480 VAC
Wide thermal operating range: -40º C 528–660 VAC 600 VAC
(-40º F) to 85º C (185º F) Nominal Output Voltage 208 VAC
Conformal coated to withstand ex- 240 VAC
treme humidity and air-pollution levels 400 VAC
480 VAC
Proven Reliability
600 VAC
Rugged and reliable, PowerGate Plus Output Frequency Range 59.3–60.5 Hz
PV inverters are engineered from the 49.3–50.5 Hz
ground up to meet the demands of
AC Voltage Range (Standard) -12%/+10%
large-scale installations.
Nominal Output Frequency 60 Hz
Low Maintenance 50 Hz
Number of Phases 3
Modular components make service efficient
Maximum Output Current per Phase 278 A 208 VAC
241 A 240 VAC
Safety
145 A 400 VAC
UBC Seismic Zone 4 compliant 121 A 480 VAC
Built-in DC and AC disconnect switches 96 A 600 VAC
Peak Efficiency 96.7%
Integrated DC two-pole disconnect
switch isolates the inverter (with the CEC-Weighted Efficiency 96%
exception of the GFDI circuit) from the Maximum Continuous Output Power 100 kW (100 kVA)
photovoltaic power system to allow
inspection and maintenance
PowerGate Plus 100 kW
PowerGate Plus 100 kW Specifications UL/CSA CE
Tare Losses 62.3 W 208 VAC
61.6 W 240 VAC
64.5 W 400 VAC
66.1 W 480 VAC
68.0 W 600 VAC
Power Factor at Full Load >0.99
Harmonic Distortion <3% THD
Built-in isolation transformer Temperature
Operating Ambient Temperature Range (Full Power) -20º C to +50º C
Protective covers over exposed power
connections Storage Temperature Range -30º C to +70º C
Cooling Forced Air
Noise
Output Options Noise Level <65 dB(A)
Combiner
PowerGate Plus 100 kW
Number of Inputs and Fuse Rating 5 (110 ADC) o
UL/CSA 208 VAC Output (2 fuses/input for floating) 6 (100 ADC) o
5 (125 ADC) o
240 VAC Output
Inverter Cabinet
480 VAC Output Enclosure Rating NEMA 3R
600 VAC Output IP54
CE 400 VAC Output Enclosure Finish RAL-7032
(14-Gauge, Powder-Coated G90 Steel)
Cabinet Dimensions (Height x Width x Depth) 80" x 57" x 30.84" (203.2 cm x 144.78 cm x 78.33 cm)
Streamlined Design Cabinet Weight 2,350 lbs. 1,066 kg
With all components encased in Transformer
a single, space-saving enclosure, Integrated Internal Transformer
PowerGate Plus PV inverters are easy Low Tap Voltage 1
20%
to install, operate, and maintain. Testing and Certification
UL1741, CSA 107.1-01, IEEE 1547, IEEE C62.41.2, IEEE C62.45, IEEE
Single Cabinet with Small Footprint C37.90.1, IEEE C37.90.2
Convenient access to all components CE Certification (EN 50178, EN 61000-6-2, EN 61000-6-4)
UBC Zone 4 Seismic Rating
Large in-floor cable glands make ac-
cess to DC and AC cables easy Warranty
Five Years
Rugged Construction Extended Warranty (up to 10, 15, or 20 years) o o
Engineered for outdoor environments Extended Service Agreement o o
Intelligent Monitoring
Output Transformer Satcon PV View® Plus o o
Satcon PV Zone® o o
Provides galvanic isolation
Third-Party Compatibility
Matches the output voltage of the PV
inverter to the grid Standard 1
The 20% boost tap on the isolation transformer increases the AC voltage output range for
o Optional applications where the solar array DC operating voltage is at or near the lower end of the DC input
PG100210.1 range. This boost allows for continued inverter operation at lower DC voltage input levels.
Note: Specifications are subject to change.
© 2010 Satcon Technology Corporation. All rights
reserved. Satcon is a trademark of Satcon Technology
Corporation. All other trademarks are the property of
their respective owners.
Satcon Corporate Satcon West Satcon Canada Satcon Greece Satcon Czech Republic Satcon Shenzhen China Satcon Shanghai China
27 Drydock Avenue 2925 Bayview Drive 835 Harrington Court Athanasiou Diakou 2 & Classic 7 Business Park Room 1112, 11/F, International Room 2308, 23/F, New
Boston, MA 02210 Fremont, CA 94538 Burlington, ON L7N 3P3 Marathonas Ave Jankovcova 1037/49 Chamber of Commerce, HongQiao Center Building,
P: +1.617.897.2400 P: +1.510.226.3800 Canada Gerakas 15344 170 00 Praha 7 No. 168 FuHua San Road, No. 83 LouGuanShan Road,
F: +1.617.897.2401 F: +1.510.226.3801 P: +1.905.639.4692 Greece Czech Republic FuTian District, Shenzhen, P.R.C. Changning District,
E: sales@satcon.com E: sales@satcon.com F: +1.905.639.0961 P: +30.210.6654424 P: +420.255.729.610 518048 Shanghai, P.R.C.
E: sales@satcon.com F: +30.210.6654425 F: +420.255.729.611 P: +86.755.6168.2588 P: +86.139.1811.2818
E: sales@satcon.com E: sales@satcon.com F: +86.755.6168.2599 E: sales@satcon.com
E: sales@satcon.com
