IMO TIER 2
MAXIMUM OUTPUT
495kW (673PS)
ELECTRIC GOVENOR
VARIABLE INJECTION TIMING MECHANISM
HIGH PRESSURE INJECTION PUMP "KP-21"
EXTERNAL APPEARANCE SUBJECT
TO CHANGE WITHOUT NOTICE
F.T.O. PULLEY INSTALLATION DIMENSION PROPELLER SHAFT FRANGE
1896
1701
150 569
205 100 163 110 229
JACK SCREW PROPELLER SHAFT
50 82 180
FRONT COVER (6-14x1.5) FLANGE SURFACE
6
+0.035
(90)
(40)
60 51.6
φ112 H7 0
38°
15.2 8-φ20REAMER BOLT 200
φ40
115
415
415
402
390
334
311
φ150H7/h6
210
190
φ202(OD)
(φ317)
φ196
φ140
φ276
φ140
860
φ156
φ234
680
8 (164.9) (463)
190
345
φ24
290
311
340
390
402
415
415
115
6-16x2
DEPTH23 13 17.5 205
17.5 157 φ22
(40)
(90)
10x22HOLE 82 55
1848
50 OIL LEVEL GAUGE 163 180
UP TO THE PROPELLER SHAFT
FLANGE SURFACE 100 OIL DRAIN HOSE (230) 110 229 (200)
8-19穴
150 569 0
23
682
1127
UP TO THE PROPELLER SHAFT FLANGE
26
1701 5
(1034) 1873 502 (532)
532 (660) 1818 418 397
880
384 464 CYLINDER CENTER
CYLINDER CENTER
SEA WATER
OUTLET
SEA WATER
φ63.5
INLET
704
564
T
AF
(335)
CRANK SHAFT
305
1159
DR
CRANK SHAFT CENTER
CRANK SHAFT
5
50
CENTER CENTER
48
85
211
(85)
(85)
(85)
(85)
406
423
443
PROPELLER
SHAFT CENTER
°
75
75
°
PROPELLER
146 169 956 264 386 200 SHAFT CENTER 150 150
334 348 569 390 390
390 390 1896 415 415
415 415 FUEL INLET FUEL OUTLET 430 430
430 430
●THE DETAILS OF CAUSTIONS, PLEASE REFER TO THE INSTRUCTION MANUAL
■ENGINE SPECIFICATION ■STANDARD ACCESSORY PARTS
ELECTRIC GOVERNOR CONTROL SYSTEM……… 1SET
MODEL 6M125AP-5 6M125A-5 GOVERNOR BACK UP TOOL………………………… 1SET
BILGE PUMP (ELECTRIC)……………………………… 1SET
MAX OUTPUT 495kW(673PS)/2300min-1 465kW(632PS)/2200min-1 COUPLING FOR PROPELLER SHAFT……………… 1
WASTE OIL DRAIN PUMP……………………………… 1SET
TYPE OF ENGINE WATER COOLED, VERTICAL TYPE(WITH TURBO, SEA WATER AFTER COOLER) BATTERY SWITCH………………………………………… 1SET
INSTRUMENT PANEL WITH OK MONITOR………… 1SET
CYLINDER(NUMBER-BORE×STROKE) 6-125mm × 150mm ENGINE MOUNTING BOLT……………………………… 1SET
BREATHER FITTINGS, HOSE………………………… 1SET
TOTAL DISPLACEMENT 11.0L STANDARD TOOL………………………………………… 1SET
F・PTO PULLEY…………………………………………… 1SET
CONBUSTION SYSTEM DIRECT INJECTION
MARINE GEAR MGN153A ■OPTIONAL ACCESSORY PARTS
MUFFLER
GEAR RATIO 1.65, 2.00, 2.48, 2.92, 3.25
SEA WATER STRAINER
PROPELLER SHAFT ROTATION RIGHT ROTATION (WATCHED BY STERN SIDE) PRIMARY FUEL FILTER FOR HEAVY OIL A
REMOTE CONTROL CABLE
FUEL LIGHT FUEL KINGSTON VALVE
STARTING SYSTEM ELECTRIC STARTING
COOLING SYSTEM FRESH WATER COOLED (SEA WATER INDIRECT COOLING) ●6M125AP-5 HAS BEEN SET AS LIMITED LIGHT DUTY AND
THERE ARE RESTRICTIONS ON USE, SO PLEASE CONTACT
DRY WEIGHT 1790kg YOUR LOCAL DISTRIBUTOR FOR DETAILS.
●SPECIFICATIONS AND EXTERNAL APPEARANCE OF THE
GENERATOR CAPACITY 24V-1kW ENGINE LISTED IN THIS CATALOG ARE SUBJECT TO
CHANGE WITHOUT NOTICE DUE TO IMPROVEMENT ETC.
STANDARD BATTERY CAPACITY x NUMBER (12V-200Ah) x 2 ●BECAUSE THE COLOR OF THE PRODUCT ON THIS CATALOG
IS PRINTED MATTER, IT MAY DIFFER SLIGHTLY FROM THE
IMO Tier 2 ○ ACTUAL COLOR.
ISUZU MOTORS ENGINE SALES INC. WARNING OPERATING PRECAUTIONS
・WHEN USING, PLEASE USE IT CORRECTLY BASED ON THE INSTRUCTION MANUAL.
http://www.ies.isuzu.co.jp ・IN ORDER TO PREVENT MALFUNCTIONS AND ACCIDENTS BEFOREHAND, PLEASE
BE SURE TO PERFORM PRE-WORK INSPECTION AND SCHEDULED INSPECTION.
・IF USING FUEL, LUBRICANT, ETC. OTHER THAN THOSE STATED IN THE INSTRUCTION
MANUAL, IT MAY RESULT IN ACCIDENT OR MALFUNCTION.
1703003As
