Estimation of Production Unit DnD Industries -chinora

SN Name of Perticular Nos L B H

1 Structural Steel
ISMB 450 for Main Column 8 4.5
ISMC 100 Built Up Section 28 3.2
Gusset Plate for ISMB450 8 0.65 0.35 0.016
Gusset Plate ISMC 100 Built Up Section 8 0.4 0.4 0.016
Rafter ISMC 75 14 5
ISMC 75 7 3.5
ISMC 75 7 1.5
ISMC 75 6 1.5

Purlin ISA 75x75x5 10 17.5

4 17.5
2 17.5
4 15.5
Gusset Plate at Top
Gusset Plate for ISMB450 8 0.65 0.35 0.016
Gusset Plate ISMC 100 Built Up Section 8 0.4 0.4 0.016

2 Anchor Bolt ISMB450 48

Anchor Bolt ISMC 100 Built Up Section 56

3 Excavation Footing ISMB 450 8 1.2 1.2 1.5

Excavation for Footing ISMC 100 14 0.9 0.9 1.5

4 PCC Footing ISMB 450 8 1.2 1.2 0.1

PCC for Footing ISMC 100 14 0.9 0.9 0.1

5 RCC of Footing 8 1.2 1.2 0.4

14 0.9 0.9 0.3
Footing Pedestral 8 0.75 0.45 0.4
14 0.5 0.5 0.4

6 RCC Column 10 0.45 0.35 4.5

7 RCC of Plinth Beam 2 9.5 0.45 0.35

2 15 0.45 0.35
5 2.8 0.45 0.35
1 15.25 0.45 0.35
1 2.65 0.45 0.35
 8 RCC of Lintel
RS 1 4 0.2 0.15
D 4 1.5 0.2 0.15
D1 3 1 0.2 0.15
W 3 1.5 0.2 0.15
1 14.4 0.2 0.15
1 2.8 0.2 0.15
1 3 0.2 0.15
1 2.55 0.2 0.15

9 RCC of Chajja
RS 1 4 0.0516
D 4 1.5 0.0516
D1 3 1 0.0516
W 3 1.5 0.0516
1 14.4 0.0516
1 2.8 0.0516
1 3 0.0516
1 2.55 0.0516

10 150mm Brickwork
1 17.55 3.17 0.15
1 15.23 3.17 0.15
1 17.775 4.45 0.15
1 9.32 4.45 0.15
1 3 3 0.15
1 9.32 4.45 0.15
1 15 4.45 0.15
4 2.775 3.17 0.15
1 2.625 3.17 0.15

Deduction Lintel
RS 1 4 0.2 0.15
D 4 1.5 0.2 0.15
D1 3 1 0.2 0.15
W 3 1.5 0.2 0.15
1 14.4 0.2 0.15
1 2.8 0.2 0.15
1 3 0.2 0.15
1 2.55 0.2 0.15

Deduction Opening
RS 1 4 4.5 0.15
D 4 1.5 2.1 0.15
D1 3 1 2.1 0.15
W 3 1.5 1.2 0.15
11 Internal Plaster 12mm Thick
Workshop 1 9.021 14.7 4
Acclimatising Room 1 2.5 3.43 2.75
Inward Goods Room 1 2.5 6 2.75
Store Room For Finished Product 1 2.5 5 2.75
Test Lab 1 4.488 2.625 2.75
Bond Room 1 4.453 2.625 2.75
Pantry 1 2.775 1.368 2.75
Toilet 1 2.775 1.368 2.75

Deduction
RS 1 4 4.5
D 8 1.5 2.1
D1 6 1 2.1
W 3 1.5 1.2

12 External Plaster
1 17.55 3.17
1 15.23 3.17
1 17.775 4.45
1 9.32 4.45
1 3 3
2 9.32 1
2 15 1

Deduction
RS 1 4 4.5
D 0 1.5 2.1
D1 0 1 2.1
W 3 1.5 1.2

13 Profile Sheet
Front Side 1 53 Sqm
Top Inclined 2 5 15.5
Side Inclined 2 3.5 17.55
Back Sice 1 53 Sqm
Vertical Side Drop Down 2 1 15
 Deduction
RS 1 4 4.5
W 3 1.5 1.2

13A valley gutter of 22 B.W.G. (0.8 mm)

4 17.5

14 Internal Painting
Workshop 1 9.021 14.7 4
Acclimatising Room 1 2.5 3.43 2.75
Inward Goods Room 1 2.5 6 2.75
Store Room For Finished Product 1 2.5 5 2.75
Test Lab 1 4.488 2.625 2.75
Bond Room 1 4.453 2.625 2.75
Pantry 1 2.775 1.368 2.75
Toilet 1 2.775 1.368 2.75

Deduction
RS 1 4 4.5
D 8 1.5 2.1
D1 6 1 2.1
W 3 1.5 1.2

15 External Plainting
1 17.55 3.17
1 15.23 3.17
1 17.775 4.45
1 9.32 4.45
1 3 3
2 9.32 1
2 15 1

Deduction
RS 1 4 4.5
D 0 1.5 2.1
D1 0 1 2.1
W 3 1.5 1.2

16 IPS Flooring
 Workshop 1 9.021 14.7

17 Kota Flooring
Acclimatising Room 1 2.5 3.43
Inward Goods Room 1 2.5 6
Store Room For Finished Product 1 2.5 5
Test Lab 1 4.488 2.625
Bond Room 1 4.453 2.625
Pantry 1 2.775 1.368

17A Kota Flooring Skirting

Acclimatising Room 1 2.5 3.43 0.075
Inward Goods Room 1 2.5 6 0.075
Store Room For Finished Product 1 2.5 5 0.075
Test Lab 1 4.488 2.625 0.075
Bond Room 1 4.453 2.625 0.075
Pantry 1 2.775 1.368 0.075

18 Antiskid Tiles
Toilet 1 2.775 1.368

19 Dado
Toilet 1 2.775 1.368 2.1
Deduction 1 1 2.1

20 Plinth Filling 1 15.321 17.55 0.45

21 Steel Reiforcement
Footing 10.49 Cum 120
Column 7.0875 Cum 140
Plinth Beam 12.74175 Cum 120
Lintel 1.2075 Cum 100
Chajja 2.0769 Cum 100

22 Door
D 8 1.5 2.1

22A Door
D1 6 1 2.1
23 Door
RS 1 4 4.5

24 Window
W 3 1.5 1.2
1 14.25 1.2
1 3 1.2
1 2.75 1.2
1 3.079 1.2
1 2.55 1.2

25 Steel Grill
W 3 1.5 1.2
1 14.25 1.2
1 3 1.2
1 2.75 1.2
1 3.079 1.2
1 2.55 1.2

26 Paver Block 1 94 Sqm

27 RCC Door Frame

D1 6 1 2.1
D 8 1.5 2.1

28 Water Proofing of WC
Toilet 1 2.775 1.368 2.75

29 Anti Termite to Excavation Pit

8 1.2 1.2 2
14 0.9 0.9 2
8 1.2 1.2
14 0.9 0.9

30 Anti Termite to Plinth

1 12 17.5
chinora

Unit Weight Qty Unit

72.4 2606.4 kgs

9.2 824.32 kgs
7860 228.8832 kgs
7860 160.9728 kgs
6.8 476 kgs
6.8 166.6 kgs
6.8 71.4 kgs
6.8 61.2 kgs

5.7 997.5 kgs

5.7 399 kgs
5.7 199.5 kgs
5.7 353.4 kgs

7860 228.8832 kgs

7860 160.9728 kgs
6.935032 MT

48 Nos
56 Nos

17.28
17.01
34.29 Cum
1.152
1.134
2.286 Cum
4.608
3.402
1.08
1.4
10.49 Cum

7.0875 Cum

2.9925
4.725
2.205
2.401875
0.417375
12.74175 Cum
 0.12
0.18
0.09
0.135
0.432
0.084
0.09
0.0765
1.2075

SQM 0.2064
SQM 0.3096
SQM 0.1548
SQM 0.2322
SQM 0.74304
SQM 0.14448
SQM 0.1548
SQM 0.13158
2.0769

8.345025
7.241865
11.86481
6.2211
1.35
6.2211
10.0125
5.27805
1.248188
57.78264

0.12
0.18
0.09
0.135
0.432
0.084
0.09
0.0765
1.2075

2.7
1.89
0.945
0.81
 6.345

50.23014 Cum

189.768
32.615
46.75
41.25
39.1215
38.929
22.7865
22.7865
434.0065

18
25.2
12.6
5.4
61.2

372.8065

55.6335
48.2791
79.09875
41.474
9
18.64
30
282.1254

18
0
0
5.4
23.4

258.7254

53
155
122.85
53
30
413.85
 18
5.4
23.4

390.45

70
70

189.768
32.615
46.75
41.25
39.1215
38.929
22.7865
22.7865
434.0065

18
25.2
12.6
5.4
61.2

372.8065

55.6335
48.2791
79.09875
41.474
9
18.64
30
282.1254

18
0
0
5.4
23.4

258.7254 Sqm
132.6087 Sqm

8.575
15
12.5
11.781
11.68913
3.7962
63.34133

0.8895
1.275
1.125
1.06695
1.0617
0.62145
6.0396

3.7962

17.4006
2.1

15.3006

120.9976 Cum

1258.8
992.25
1529.01
120.75
207.69
4108.5
4.1085

25.2
25.2

12.6
12.6
 18

5.4
17.1
3.6
3.3
3.6948
3.06
36.1548

5.4
17.1
3.6
3.3
3.6948
3.06
36.1548

94

31.2
45.6
76.8 RMT

22.7865

22.7865

76.8
100.8
11.52
11.34
200.46

210
 Providing and fabricating structural steel work in rolled sections like joists, channels,
angles, tees etc. as per detailed design and drawings or as directed including cutting,
1 fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded MT
connections without connecting plates, braces etc. and including one coat of anticorrosive
paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing mild steel grill gate as per the detailed drawing including hinges,
locking arrangements and painting in three coats of oil paint of approved colour and
1A Sqm
shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)
Spec.Number: As directed by Engineer- in-charge.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including
removing the excavated material up to a distance of 50 m. beyond the building area and
3 stacking and spreading as directed, dewatering, preparing the bed for the foundation and Cum
necessary back filling, ramming, watering including shoring and strutting etc. complete.
(Lift upto 1.5 m.)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/
granite/quartzite/gneiss metal for steps including steel centering, formwork,
laying/pumping, compacting, roughening them if special finish is to be provided, finishing
uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3
4 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid CUM
concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not
be allowed.),with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite
/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage
5 and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel
centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening
the surface if special finish is to be provided (Excluding reinforcement and structural steel)
etc. complete, with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite
/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as
directed including steel centering, formwork, cover blocks, laying/pumping, compaction
finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to
give a smooth and even surface or roughening if special finish is to be provided and curing
etc. complete,(Excluding reinforcement and
structural steel).with fully automatic micro processor based PLC with SCADA enabled
6 reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/
7 quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings
or as directed including steel centering, formwork, cover blocks, laying/pumping,
compactionand roughening the surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement and structural steel).with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/
8 quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings
or as directed including steel centering, formwork, cover blocks, laying/pumping,
compactionand roughening the surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement and structural steel).with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/
9 quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including
steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the
surface if special finish is to be provided and curing complete. (Excluding reinforcement
and structural steel). with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement
10 mortar 1:6 in superstructure including striking joints, raking out joints, watering and
scaffolding etc. Complete

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without
11 neeru finish to concrete or brick surfaces, in all position including scaffolding and curing
etc. complete
 Providing sand faced plaster externally in cement mortar using approved screened sand,
12 in all positions including base coat of 15 mm thick in cement mortar 1:4 using
waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2
days and keeping the surface of the base coat rough to receive the sand faced treatment
6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing
for fourteen days scaffolding etc.complete.

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or
13 valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron
screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8
Kilogram/sq.m.).

13A Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120
cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the
upper surface of plank etc. complete. (excluding painting to underside of plank)

Providing and applying plastic emulsion paint of approved quality, colour and shade to
14 new surface in three coats including scaffolding, preparing the surface. (excluding primer
coat) etc. complete.

Providing and applying two coats of exterior weather shield paint of approved
15 manufacture and of approved colour to the plastered surfaces including
cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and
watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior
approval of Superintending Engineer will be necessary

Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones
17 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement
mortar including cement float, filling joints with neat cement slurry, curing, cleaning and
Mirror Polishing etc. complete Note- Water absorption for kota stone should not exceed
0.05%.( Item to be used with prior permission of Superintending Engineer )
17A Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25
mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float,
filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and
18 confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on
a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning
curing etc. complete

19 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm
of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make,
shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar
including neat cement float, filling joints, curing and cleaning etc. complete.

21 Providing and fixing in position TMT - FE - 500 bar reinforcement of various

diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns,
canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per
22
detailed designs, drawings and schedules. including cutting, bending, hooking the

Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick
22A without ventilator commercial type of exterior grade as per detailed drawings with
wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides
and finishing with oil painting 3 coats complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9
mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section
23 fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth
and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements,
M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,
suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9
mm thickness and of any size at top and safety devices including mechanical gear
operation arrangement consisting of worm gear wheels and worms of high grade cast iron
or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With
mechanical gear)
 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two
tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight
0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x
24 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x
31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking
section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section
40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x
1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as
directed by Engineer in charge with all necessary Aluminium sections fixtures and
fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical
section of shutter including 5 mm thick plain glass with all required screws and nuts etc,
complete. With powder coating without box

25 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square
Metre as per drawing including fixtures, necessary welding and painting with one coats of
anticorrosive paint and two coats of oil painting complete

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm
26 thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a
bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.
complete

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with
27 chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 NOS. And strips @250 mm
c/c and fixing in wall with 6 NOS. of hold fast of 12 mm dia bars 500 mm long including
primer and oil painting etc, complete) frame size 60 mm x 125 mm

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3
including using approved water proofing compound in specified proportion as per
28 manufacturers specifications for per
bag of cement including leveling, curing and covering 10 years
guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.
 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the
29 top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of
clorophyrifos per square metre of surface area covering ten years guarantee on bond
paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the
top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of
30
clorophyrifos per square metre of surface area covering ten years guarantee on bond
paper.
6.935032 89181 618473.08879

2000 0

34.29 202 6926.58

0
0
0

2.286 6030 13784.58

10.49 6890 72276.1

0
 7.0875 13157 93250.2375

12.74175 11625 148122.84375

1.2075 11625 14037.1875

2.0769 13283 27587.4627

50.23014 7570 380242.1598

372.8065 274 102148.981

 0

258.72535 599 154976.48465

390.45 1042 406848.9

70 2734 191380

0
0

372.8065 100 37280.65

0
0
0
0
0
0

258.72535 238 61576.6333

63.341325 1481 93808.502325

0
6.0396 1281 7736.7276

3.7962 1176 4464.3312

15.3006 1982 30325.7892

0
0
4.1085 83326 342344.871
0
25.2 6723 169419.6
0

12.6 2652 33415.2

18 4730 85140

0
36.1548 4769 172422.2412

0
0
0

36.1548 1845 66705.606

0
0

94 1147 107818

76.8 1025 78720

22.7865 4866 110879.109

0
0
200.46 98 19645.08

210 96 20160

3,671,916.95