Scribd
Upload
81 views4 pages

Modus

This technical document provides repair procedures for issues connecting a caravan to a vehicle's towbar socket. The socket mounting position may need to be adjusted depending on the type of towbar. To address a customer's complaint of being unable to connect to the towbar socket, the technician should replace both the towbar socket and wiring harness. The document describes removing and refitting these parts, noting the socket mounting should always be repositioned based on the towbar type. Repair is estimated to take 1 hour.

Uploaded by

Jean Luc Breton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views4 pages

Modus

This technical document provides repair procedures for issues connecting a caravan to a vehicle's towbar socket. The socket mounting position may need to be adjusted depending on the type of towbar. To address a customer's complaint of being unable to connect to the towbar socket, the technician should replace both the towbar socket and wiring harness. The document describes removing and refitting these parts, noting the socket mounting should always be repositioned based on the towbar type. Repair is estimated to take 1 hour.

Uploaded by

Jean Luc Breton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

BEIGE TECHNICAL NOTE

EDITION ANGLAISE
FEBRUARY 2005
77 11 339 402 4513P
Service 00429
Type

MODUS JP0X

fitted with towbar with a swan neck ball joint


or a ball joint that can be removed without the use of a tool (RDSO)
03A TOWBAR SOCKET MOUNTING

Other sub-section concerned: 56A


●
Engine: XXX Basic manual: XXX
●
Gearbox: XXX

TECHNICAL INFORMATION CLAIM COMPLETION AND CODING


Customer complaint When to take action
– Impossible to connect the caravan to the towbar – Upon receipt of a customer complaint.
socket.
Parts required
Possible cause
– Positioning of the towbar socket mounting. Depends on the type of towbar wiring harness
fitted to the vehicle
Fault finding
Quantity and description of parts Part no.
– Confirm the customer complaint.
1 7-pin towbar wiring harness 77 11 224 944
Operation to be carried out
– Replace: or
– The towbar socket. 1 13-pin towbar wiring harness 77 11 224 945
– The towbar wiring harness.

Description of the operation Time required


Code Description Time
REMOVAL
– Remove: 7648 Replacing the towbar wiring 1.0
– the towbar wiring harness, harness.
– the towbar socket.
TOTAL 1.0
REFITTING
– Fit the towbar wiring harness.
– ALWAYS reposition the socket mounting (1) Codification items
depending on the type of towbar fitted to the vehicle. ●
With PGCS
Refer to the following pages.
– Catalogue function:
Description Code
IMPORTANT
The towbar socket mounting may be damaged if it is External equipment 0013
not positioned correctly.
– Cause Opecode: 7648
●
Without PGCS
– NITG code: A221
●
With or without PGCS
– Supplier code: 050
– Customer complaint code: 5R, 5S

"The repair procedures given by the manufacturer in this document are based on the All rights are reserved by RENAULT S.A.S.
technical specifications current when it was prepared.
Copying or translating, in part or in full, of this document or use of the service part
The procedures may be modified as a result of changes introduced by the reference numbering system is forbidden without the prior written authority of
manufacturer in the production of the various component units and accessories from RENAULT S.A.S.
which his vehicles are constructed".

© RENAULT s.a.s. 2005


103A
TOWBAR
Socket mounting 03A
Towbar with swan neck ball joint

03A-2
TOWBAR
Socket mounting 03A
Towbar with mechanical RDSO

03A-3
TOWBAR
Socket mounting 03A
Towbar with automatic RDSO

03A-4

You might also like