Scribd
Upload
123 views1 page

Certificazione - Drefon - Unlocked

This certificate confirms that Manifattura Fontana S.p.A. located in Valstagna, Italy complies with Regulation 305/2011/EU for their geotextile products. The certificate lists the specific Drefon geotextile products that have been certified and their intended functions. It also confirms that Manifattura Fontana S.p.A. meets the factory production control requirements for these products as described in the harmonized standards EN 13249-13257 and EN 13265. This certificate was originally issued in 2002 and remains valid as long as the test standards and manufacturing conditions do not significantly change.

Uploaded by

Александар Гајић
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views1 page

Certificazione - Drefon - Unlocked

This certificate confirms that Manifattura Fontana S.p.A. located in Valstagna, Italy complies with Regulation 305/2011/EU for their geotextile products. The certificate lists the specific Drefon geotextile products that have been certified and their intended functions. It also confirms that Manifattura Fontana S.p.A. meets the factory production control requirements for these products as described in the harmonized standards EN 13249-13257 and EN 13265. This certificate was originally issued in 2002 and remains valid as long as the test standards and manufacturing conditions do not significantly change.

Uploaded by

Александар Гајић
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Certification Body 1213

SKZ – TeConA GmbH


Friedrich-Bergius-Ring 22
97076 Würzburg / Germany

Certificate of Conformity of the Factory Production Control


1213–CPR–3243
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
Construction Products Regulation or CPR), this certificate applies to the construction product(s)
Drefon S GRK2, Drefon S GRK3, Drefon S GRK3C, Drefon S GRK4, Drefon S GRK5,
Drefon S 100, Drefon S 120, Drefon S 130, Drefon S 140, Drefon S 150, Drefon S 160,
Drefon S 170, Drefon S 180, Drefon S 200, Drefon S 225, Drefon S 240, Drefon S 250,
Drefon S 280, Drefon S 300, Drefon S 300 TX-DK, Drefon S 310, Drefon S 330,
Drefon S 350, Drefon S 375
Geotextile, nonwoven, needle punched; Staple fibres; Raw material: PP, white
used for the functions: S + F
Drefon RVS 1150, Drefon RVS 1500, Drefon RVS 1850-1, Drefon RVS 3850-1
used for the functions: S + F + D
Drefon S 400, Drefon S 450, Drefon S 475 StB, Drefon S 500, Drefon S 500 StB,
Drefon S 550, Drefon S 600, Drefon S 650, Drefon S 700, Drefon S 800, Drefon S 900,
Drefon S 1000, Drefon S 1000 TX, Drefon S 1200, Drefon S 1200 ON, Drefon S 1500,
Drefon S 1600, Drefon S 1800, Drefon S 2000,
Drefon S 500T - 500, Drefon S 500T - 700, Drefon S 500T - 800, Drefon S 500T - 1000
used for the functions: S + F + D + P
produced by or for
Manifattura Fontana S.p.A.
Via Fontoli, 10
36020 Valstagna (VI)
Italy
and produced in the manufacturing plant(s)
Valstagna
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described
in Annex ZA of the standard(s)

EN 13249:2000/A1:2005; EN 13250:2000/A1:2005;
EN 13251:2000/A1:2005; EN 13252:2000/A1:2005;
EN 13253:2000/A1:2005; EN 13254:2000/A1:2005;
EN 13255:2000/A1:2005; EN 13256:2000/A1:2005;
EN 13257:2000/A1:2005; EN 13265:2000/A1:2005
under system 2+ are applied and that
the factory production control fulfils all the prescribed requirements set out above.
This certificate was first issued on 2002-10-14 and will remain valid as long as the test methods and/or factory production
control requirements included in the harmonised standard, used to assess the performance of the declared characteristics,
do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.

i. V.

Würzburg, 06 March 2014 Dipl.-Ing. Helmut Zanzinger


Certification Body

For a copy of this certificate including newest products visit: www.skz.de

You might also like