Landpower 125 | 135 | 145 | 165 ENGINE ENVIRONMENT STANDARDS

SPECIFICATION 125 135 145 165

ENGINE ß-POWER ß-POWER ß-POWER ß-POWER
Max. Power ISO (kW) 86 98 104 116
Rated Speed (rpm) 2200 2200 2200 2200
Max. Torque (Nm) 515 590 625 691
Max. Torque Speed (rpm) 1250 1250 1250 1 250
Mechanical Fuel Injection, Turbo, Inter Cooled STD STD STD STD
Bore/Stroke 104/132 104/132 104/132 104/132
Displacement/No. of Cylinders (cm³) 6728/6 6728/6 6728/6 6728/6
Fuel Tank Capacity (lt) 260 260 260 260

CONFIGURATION Techno Techno Techno Techno

Platform & Cab Models Plat/Cab Plat/Cab Toptronic Plat/Cab Toptronic Plat/Cab Toptronic

CLUTCH UNIT
Single Dry Clutch. Self Adjusting 14in/355mm
Electro Hydraulic Wet Clutch STD STD — STD — STD —

TRANSMISSION
Basic Gearbox x6 Speed Synchronised
3 Ranges + Creeper
36 FWD + 36 REV
Synchronised Mechanical Reverse Shuttle STD STD — STD — STD —

Basic Gearbox x6 Speed Synchronised,

3 Ranges and Creeper
3 Power Shifts per Gear 108 FWD + 36 REV
Electro Hydraulic Forward and Reverse Shuttle — — STD — STD — STD

POWER TAKE OFF

Electro-Hydraulic Engagement, 2 Speeds 540/1000 (rpm)
1” 3/8 PTO Shaft with 6 or 21 Splines
Ground Speed PTO STD STD STD STD STD STD STD

4WD FRONT AXLE

Type: Rigid Axle STD STD STD STD STD STD STD
4WD Spring-on Engagement STD STD STD STD STD STD STD
Max. Steering Angle 55° STD STD STD STD STD STD STD
BRAKES (INTEGRAL BRAKING SYSTEM)
Oil-Bath Graphite Coated Front & Rear Brakes STD STD STD STD STD STD STD
Hydraulic Trailer Brake System OPT OPT OPT OPT OPT OPT OPT

HYDRAULIC POWER LIFT

Mechanical Operated STD STD — STD — STD —
Functions: Position Control, Draft Control, Intermix, Floating STD STD STD STD STD STD STD
Electro Hydraulic Hitch
Functions: Position Control, Draft Control, Intermix, Floating — — STD — STD — STD
Lifting Capacity with 2 Cylinders (kg) 7000 7000 7000 7000 7000 8400 8400
Hydraulic Pump Delivery (ltr/min) 68 + 38 68 + 38 83 + 38 68 + 38 83 + 38 68 + 38 83+38
CAT II or III 3 Point Linkage STD STD STD STD STD STD STD
Auxiliary Hydraulic Valves - No. 1 Valve with Flow Control 3 3 3 3 3 3 3

WEIGHTS AND DIMENSIONS (IN RUNNING ORDER)

Front Tyers (STD) 14.9 R28 420-70 R28 16.9 R26 540/65 R28
Rear Tyers (STD) 18.4 R28 520-70 R38 20.8 R38 650/65 R38
Total Weight without Ballast (kg) 5500 5500 5500 5500
Wheelbase (mm) 2800 2800 2800 2800
Total Length (mm) 5145 5145 5450 5450
Minimum Width (mm) 2058 2058 2212 2445
Ground Clearance (mm) 520 520 550 550
Height Over Cab/Roof (mm) 2780 2800 2810 2810
Minimum Turning Radius without Brakes (mm) 5350 5350 5350 5350
TRACK ADJUSTMENT #
Front Track Adjustment (mm)# 1597/2214 1597/2214 620/2238 1620/2238
Rear Track Adjustment (mm)# 1592/2092 1592/2092 1560/2264 1864/2264

BALLASTING
Rear Wheel Weights 4 4 6 6
Front Ballast Weights 42kg Each 8 10 13 19

See operations and maintenance manual for adjustment with specific tyres.
Whilst every effort is made to ensure that the specifications, descriptions and illustrations in this brochure are correct at the time of print these are also subject to change without notice.

STD = Standard – = Not Available

OPT = Optional # = Track adjustments not with listed tyres.

ARGO Industrial (Pty) Ltd.

www.argosa.co.za • landini@argosa.co.za