RSA5000 Series

Real-time Spectrum Analyzer

Ultra-Real technology
Frequency: up to 6.5 GHz
Displayed average noise level (DANL): <-165 dBm (typical)
Phase noise: <-108 dBc/Hz (typical)
Level measurement uncertainty: <0.8 dB
6.5 GHz tracking generator
Min. RBW 1 Hz
Up to 40 MHz real-time analysis bandwidth
Multiple measurement modes
Various advanced measurement functions
Vector signal analysis measurement application (option)
EMI measurement application (option)
Vector network analyzer application
Multiple trigger modes and trigger masks
Density, spectrogram, and other display modes
PC software options
10.1'' capacitive multi-touch screen, supporting touch gestures
USB, LAN, HDMI and other communication and display interfaces
 RSA5000 Series Real-time Spectrum Analyzer
Built-in Linux operating system reliable and stable interface

Built-in quad-core
processor
high processing speed
10.1-inch capacitive
multi-touch screen
supporting touch
gestures

Support keyboard and TG : 100kHz to 3.2/6.5GHz

mouse operation RF: 9kHz to 3.2/6.5GHz
-40 to 0dBm

Product Dimensions: Width × Height × Depth = 410 mm × 224 mm × 135 mm

Based on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in
the analysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram,
Density, and PVT. Besides, FMT function is also available.

The Ultra-Real technology has the following features:

Seamless analysis
◎ Seamless I/Q data acquisition in the analysis bandwidth
◎ Gap-free spectrum analysis

2
FMT
Frequency mask trigger (FMT) to trigger the measurement by
sporadic or transient events in the spectrum

Composite displays
Spectrogram for gap-free display of the spectrum Density spectrum for you to visualize how frequently signals occur

RSA5000 Series Real-Time Spectrum Analyzer

Integrates five measurement modes to address the challenges for multiple RF test requirements with
one single instrument
RSA5000 series provides EMI, RTSA, VSA, and VNA modes in addition to the traditional GPSA mode. Engineers may find it convenient to
address multiple RF test challenges with just one instrument, effectively reducing their time and costs, greatly improving their working
efficiency.

Advanced measurement mode provides test items required Quickly recall the limit line compliant with the CISPR standard
for the transmitter test such as multichannel power, ACP, and (e.g. EN55011, EN55012, etc.) to carry out pre-test and monitor
occupied BW. the target point with three different detectors.

3
 With the Density spectrum, you can find out the exceptional You can freely set the way to display the measurement results,
signals hidden behind the high-level signals, and capture them demonstrate multiple views of the signals at one time to
accurately with the FMT. obtain a clearer display effect through flexible adjustment of
the display layout.

In VNA mode, you can make S11, S21, and DTF measurements
for the components and circuit networks. The network
characteristics of the components under test can be accurately
demonstrated in Smith chart, Polar chart, and other formats.

Various operation modes to improve your  Multiple interfaces to improve the connectivity
operation experience of the instruments
The 10.1-inch capacitive multi-touch screen supports various The instrument can be connected to a larger display/monitor via
touch gestures, making it always keep up with the mainstream the HDMI interface for better display effects. The Web Control
development trend for screen operation. The gesture-enabled function allows you to directly control the device by accessing the
operation such as tapping, dragging, pinching & stretching makes device IP address, improving the experience of remote control.
the measurement action smooth and convenient, easy for you to
operate the instrument. Meanwhile, the instrument still keeps the
knob and key operation as what RIGOL traditional instruments
have, optimizing the user-friendly interactive experience to a large
extent. It also supports keyboard and mouse operation.

4
 Specifications
Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours
at 0℃ to 50℃ temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the
measurement uncertainty.
Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25℃).
This data is not warranted and does not include the measurement uncertainty.
Nominal: the expected mean or average performance or a designed attribute (such as the 50 Ω connector). This data is not warranted
and is measured at room temperature (approximately 25℃).
Measured: an attribute measured during the design phase which can be compared to the expected performance, such as the amplitude
drift variation with time. This data is not warranted and is measured at room temperature (approximately 25℃).
NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The specifications
(except the tracking generator specifications) listed in this manual are those when the tracking generator is off.

Measurement Mode
Measurement Mode
General-Purpose Spectrum Analyzer (GPSA)
Real-time Spectrum Analyzer (RTSA)
Vector Signal Analysis Measurement Application (VSA)
EMI Measurement Application (EMI)
Vector Network Analyzer Application（VNA）
Measurement Mode and Product Model Adaptation Table
RSA5032 RSA5032-TG RSA5032N RSA5065 RSA5065-TG RSA5065N
GPSA √ √ √ √ √ √
RTSA √ √ √ √ √ √
VSA O O O O O O
EMI O O O O O O
VNA × × √ × × √
Tracking Generator × √ √ × √ √
Note: x indicates not supported; √ indicates standard configuration; O indicates optional configuration.
The RSA5000N models include hardware capability not in the RSA5000-TG. The RSA5000-TG models cannot be used in VNA mode.

All Measurement Modes

Frequency
RSA5032/-TG/N RSA5065/-TG/N
Frequency Range 9 kHz to 3.2 GHz 9 kHz to 6.5 GHz
Internal Reference Frequency
Reference Frequency 10 MHz
±[(time since last calibration × aging rate) + temperature stability + calibration
Accuracy
accuracy]
Initial Calibration Standard <1 ppm
Accuracy Option OCXO-C08 <0.1 ppm
0℃ to 50℃ , with the reference 25℃
Temperature
Standard <0.5 ppm
Stability
Option OCXO-C08 <0.005 ppm
Standard <1 ppm/year
Aging Rate
Option OCXO-C08 <0.03 ppm/year

5
 GPSA Mode
Frequency
Frequency Readout Accuracy
Marker Frequency Resolution span/(number of sweep points - 1)
±(marker frequency readout × reference frequency accuracy + 1% × span + 10% ×
Marker Frequency Uncertainty
resolution bandwidth + marker frequency resolution)
Frequency Counter
Resolution 1 Hz
Uncertainty ±(marker frequency readout × reference frequency accuracy + counter resolution)
Frequency Span
Range 0 Hz, 10 Hz to maximum frequency
Resolution 2 Hz
Uncertainty ±span/(number of sweep points - 1)
SSB Phase Noise
20℃ to 30℃，fc = 500 MHz
1 kHz <-95 dBc/Hz (typical)
10 kHz <-106 dBc/Hz, <-108 dBc/Hz (typical)
Carrier Offset
100 kHz <-106 dBc/Hz, <-108 dBc/Hz (typical)
1 MHz <-115 dBc/Hz, <-117 dBc/Hz (typical)

Measured phase noise @ 10kHz offset of RSA5032/RSA5032-TG/RSA5032N/RSA5065/

RSA5065-TG/RSA5065N

Residual FM
20℃ to 30℃ , RBW = VBW = 1 kHz
Residual FM <10 Hz (nominal)
Bandwidth
Set "Sweep Time Rule" to "Accy"
Resolution Bandwidth (-3 dB)[1] 1 Hz to 10 MHz, in 1-3-10 sequence
3 kHz to 10 MHz, <5% (nominal)
RBW Accuracy
10 Hz to 1 kHz, <15% (nominal)
Resolution Filter Shape Factor (60 dB: 3 dB) <5 (nominal)
Video Bandwidth (-3 dB) 1 Hz to 10 MHz, in 1-3-10 sequence
Resolution Bandwidth (-6 dB) 200 Hz, 9 kHz, 120 kHz, 1 MHz

Note: [1] When the tracking generator is enabled or in zero span mode, the available range of RBW is from 1 kHz to 10 MHz.

6
Amplitude
Measurement Range
fc ≥ 10 MHz
Range
DANL to +30 dBm
Maximum Safe Input Level[1]
DC Voltage 50 V
+30 dBm, attenuation ≥ 40 dB, preamp off.
CW RF Power
-10 dBm, attenuation = 20 dB, preamp on.
Maximum Damage Level
CW RF Power +33 dBm (2 W)

Measured frequency VS maximum input power Measured frequency VS maximum input power
of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N

Displayed Average Noise Level (DANL)

RSA5032/-TG/N RSA5065/-TG/N
attenuation = 0 dB, sample detector, trace averages ≥ 50, tracking generator off,
normalized to 1 Hz, 20℃ to 30℃ , input impedance = 50 Ω.
9 kHz to 100 kHz <-120 dBm (typical) <-120 dBm (typical)
100 kHz to 20 MHz <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical)
20 MHz to 1.5 GHz <-142 dBm, <-145 dBm (typical) <-142 dBm, <-145 dBm (typical)
Preamp off 1.5 GHz to 2.7 GHz <-140 dBm, <-143 dBm (typical) <-140 dBm, <-143 dBm (typical)
2.7 GHz to 3.2 GHz <-138 dBm, <-141 dBm (typical) <-138 dBm, <-141 dBm (typical)
3.2 GHz to 5.5 GHz <-138 dBm, <-143 dBm (typical)
5.5 GHz to 6.5 GHz <-136 dBm, <-141 dBm (typical)
100 kHz to 20 MHz <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical)
20 MHz to 1.5 GHz <-162 dBm, <-165 dBm (typical) <-162 dBm, <-165 dBm (typical)
1.5 GHz to 2.7 GHz <-160 dBm, <-163 dBm (typical) <-160 dBm, <-163 dBm (typical)
Preamp on
2.7 GHz to 3.2 GHz <-158 dBm, <-161 dBm (typical) <-158 dBm, <-161 dBm (typical)
3.2 GHz to 5.5 GHz <-156 dBm, <-161 dBm (typical)
5.5 GHz to 6.5 GHz <-154 dBm, <-159 dBm (typical)

Note: [1] When fc < 10 MHz, the maximum safe input level is decreased.

7
 Measured Displayed Average Noise Level of RSA5065/RSA5065-TG/RSA5065N
Measured Displayed Average Noise Level of RSA5032/RSA5032-TG/RSA5032N

Level Display
Logarithmic Scale 1 dB to 200 dB
Linear Scale 0 to reference level
Number of Display Points 801
Number of Traces 6
Trace Detector normal, pos-peak, neg-peak, sample, RMS average, voltage average, and quasi-peak
Trace Function clear write, max hold, min hold, average, view, blank
Scale Unit dBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
Frequency Response
RSA5032/-TG/N RSA5065/-TG/N
attenuation = 10 dB, relative to 50 MHz, 20℃ to 30℃
100 kHz to 3.2 GHz <0.5 dB, <0.3 dB (typical) <0.5 dB, <0.3 dB (typical)
Preamp off
3.2 GHz to 6.5 GHz <0.7 dB, <0.5 dB (typical)
attenuation = 0 dB, relative to 50 MHz, 20℃ to 30℃
100 kHz to 3.2 GHz <0.7 dB, <0.3 dB (typical) <0.7 dB, <0.3 dB (typical)
Preamp on
3.2 GHz to 6.5 GHz <0.9 dB, <0.5 dB (typical)

Measured frequency response of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N

Measured frequency response of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N

8
Input Attenuation Switching Uncertainty
Setting Range 0 dB to 50 dB, in 1 dB step
fc = 50 MHz, relative to 10 dB, preamp off, 20℃ to 30℃
Switching Uncertainty
<0.3 dB

Measured attenuation switching uncertainty VS temperature of

Measured attenuation switching uncertainty of
RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N
RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N

Absolute Amplitude Accuracy

fc = 50 MHz, peak detector, preamp off, attenuation = 10 dB, input signal level = -10 dBm, 20℃
Uncertainty to 30℃
<0.3 dB
Reference Level
Logarithmic Scale -170 dBm to +30 dBm, in 0.01 dB step
Range
Linear Scale 707 pV to 7.07 V, 0.11% (0.01 dB) resolution
RBW Switching
Set "Sweep Time Rule" to "Accy", relative to 30 kHz RBW
Uncertainty 1 Hz to 1 MHz <0.1 dB
3 MHz, 10 MHz <0.3 dB
Preamp (Option RSA5000-PA)
RSA5032/-TG/N RSA5065/-TG/N
Frequency Range 100 kHz to 3.2 GHz 100 kHz to 6.5 GHz
Gain 20 dB (nominal)
Level Measurement Uncertainty
95% confidence level, S/N > 20 dB, RBW = VBW = 1 kHz, preamp off, attenuation = 10 dB, -50
dBm < input level ≤ 0 dBm, fc > 10 MHz, 20℃ to 30℃
Level Measurement Uncertainty <0.8 dB (nominal)

Measured level measurement uncertainty VS temperature @-10dBm of

RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N

9
 RF Input VSWR
RSA5032/-TG/N RSA5065/-TG/N
attenuation ≥ 10 dB, preamp off
300 kHz to 3.2 GHz <1.6 (nominal) <1.6 (nominal)
VSWR
3.2 GHz to 6.5 GHz <1.8 (nominal)

Measured VSWR of RSA5032/RSA5032-TG/RSA5032N Measured VSWR of RSA5065/RSA5065-TG/RSA5065N

Distortion
fc ≥ 50 MHz, input signal level = -20 dBm, attenuation = 0 dB, preamp off.
Second Harmonic Intercept (SHI)
+45 dBm
fc ≥ 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 0 dB,
Third-order Intercept (TOI) preamp off.
+11 dBm, +15 dBm (typical)
fc ≥ 50 MHz, attenuation = 0 dB, preamp off.
1 dB Gain Compression (P1dB)[1]
0 dBm (nominal)

of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N

Spurious Response
input terminated with a 50 Ω load, attenuation = 0 dB, 20℃ to 30℃
Residual Response
<-90 dBm, <-100 dBm (typical)
Intermediate Frequency <-60 dBc
referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of
System-related Sideband first LO, referenced to harmonic of first LO
<-60 dBc
mixer level = -30 dBm
Input-related Spurious
<-60 dBc

Note: [1] The frequency interval of the two-tone signals should be greater than 10 MHz.

10
Sweep
Sweep
span ≥ 10 Hz 1 ms to 4,000 s
Sweep Time
zero span 1 μs to 6,000 s
span ≥ 10 Hz, RBW ≥ 1 kHz 5% (nominal)
Sweep Time
Uncertainty zero span (sweep time > 1
5% (nominal)
ms)
Sweep Mode continue, single

Trigger
Trigger
Trigger Source free run, external 1, external 2, video
span ≥ 10 Hz 0 to 500 ms
Trigger Delay
zero span 0 to 500 ms

Tracking Generator
Tracking Generator Output
RSA5032-TG/N RSA5065-TG/N
Frequency Range 100 kHz to 3.2 GHz 100 kHz to 6.5 GHz
Output Level Range -40 dBm to 0 dBm
Output Level Resolution 1 dB
relative to 50 MHz
Output Flatness
±3 dB (nominal)

@0dBm of RSA5032-TG/RSA5032N/RSA5065-TG/RSA5065N @0dBm of RSA5032-TG/RSA5032N/RSA5065-TG/RSA5065N

11
 RTSA Mode

25 MHz
Real-time Analysis Bandwidth
40 MHz (Option RSA5000-B40)
Min. Signal Duration for 100% POI at maximum span, default Kaiser window
the Full-Scale Accuracy 7.45 μs
Trace Detector pos-peak, neg-peak, sample, average
Number of Traces 6
Window Type Hanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian
provides 6 RBWs for each window, except the Rectangular;
for Kaiser window
Span Min. bandwidth Max. bandwidth
40 MHz 100 kHz 3.21 MHz
Resolution Bandwidth
25 MHz 62.8 kHz 2.01 MHz
10 MHz 25.1 kHz 804 kHz
1 MHz 2.51 kHz 80.4 kHz
100 kHz 251 Hz 8.04 kHz
Max. Sample Rate 51.2 MSa/s
FFT Rate 146,484/s (norminal)
Number of Markers 8
Amplitude Resolution 0.01 dB
Frequency Point 801
Max. sample rate
Acquisition Time
>156.5 μs
Min. Signal Duration for 100% POI at Different RBWs
Duration Time (μs)
Span RBW1 RBW2 RBW3 RBW4 RBW5 RBW6
40 MHz 26.9 16.9 11.9 9.32 8.07 7.45
25 MHz 38.9 22.9 14.9 10.9 8.82 7.82
10 MHz 86.8 46.8 26.8 16.8 11.8 9.30
1 MHz 807 407 207 107 56.3 31.3
Amplitude
Amplitude Flatness ±0.5 dB[1] (nominal)
SFDR <-60 dBc (typical)
Density
Probability Range 0 to 100% (with a step of 0.1%)
Min. Span 5 kHz
Persistence Duration 32 ms to 10 s
Spectrogram
History Depth 8,192
Dynamic Range Covered by Bitmap
200 dB
Color
PVT
Min. Acquisition Time 187.9 μs
Max. Acquisition Time 40 s
Trigger
Trigger Source free run, external 1, external 2, power (time), FMT
FMT
Trigger Diagram density, spectrogram, normal, PVT
Trigger Resolution 0.5 dB (nominal)
Trigger Criteria enter, leave, inside, outside, enter-leave, leave-enter
Note: [1] Only applicable to the Normal measurement.

12
VSA Mode (Option RSA5000-VSA)

Capture Oversampling
Capture Oversampling 4, 8, 16
Capture Length
Capture Oversampling = 4 Maximum 4096
Capture Oversampling = 8 Maximum 2048
Capture Oversampling = 16 Maximum 1024
Sample Rate
32 MHz
Maximum Sample Rate
51.2 MHz (Option RSA5000-B40)
Symbol Rate
depends on capture oversampling
Symbol Rate
= sample rate/capture oversampling, ≥1 kHz
Usable I/Q Bandwidth
Usable I/Q Bandwidth symbol rate × capture oversampling / 1.28
Trigger Mode
Trigger Mode free run, external1, external2, power (time), FMT
Modulation Format
FSK 2FSK, 4FSK, 8FSK,
MSK including GMSK, can select differential coding or not
PSK BPSK, QPSK, OQPSK, DQPSK, π/4-DQPSK, 8PSK, D8PSK, π/8-D8PSK
QAM 16QAM, 32QAM, 64QAM
ASK 2ASK, 4ASK
Filter Type
Measurement Filter Type No Filter, RRC, Gaussian, Rectangular, User Defined
Reference Filter Type Raised Cosine, RRC, Gaussian, Rectangular, Half Sine, User Defined
Predefined standard
Cellular GSM, NADC, WCDMA, PDC, PHP (PHS)
Wireless Networking Bluetooth, WLAN (802.11b), ZigBee
Others TETRA, DECT, APCO-25
Measurement Uncertainty
Specifications apply under the following conditions:
temperature from +20 °C to +30 °C
signal level ≥ –25 dBm
properly adjusted reference level
offset between device’s center frequency and signal’s center frequency smaller than 5 % of
symbol rate
Random data sequence
Capture oversampling is set to 4.
Residual Error for QPSK
The reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rolloff
Test Signal
factor 0.22. The result length is 150 symbol. The center frequency is 1 GHz.
Residual EVM RMS
100 kHz < 1.5% (nominal)
Symbol Rate
1 MHz < 2% (nominal)
Residual Error for FSK
The reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rolloff
Test Signal factor 0.22. The FSK reference deviation is a quarter of the symbol rate. The result length is
150 symbols. The center frequency is 1 GHz.
Residual Frequency Error RMS
100 kHz < 2% (nominal)
Symbol Rate
1 MHz < 2.5% (nominal)

EMI Mode (Option RSA5000-EMI)

EMI Resolution Bandwidth

Resolution Bandwidth (-3 dB) 100 Hz to 10 MHz, in 1-3-10 sequence
Resolution Bandwidth (-6 dB) 200 Hz, 9 kHz, 120 kHz, 1 MHz
EMI Detector
Detector pos-peak, neg-peak, average, quasi-peak, CISPR average, RMS average

13
 EMI Key Feature
CISPR 16-1-1 detectors
CISPR 16-1-1 bandwidths
log and linear display
signal table
scan table
Key Feature simultaneous detectors
automatic limit testing
measure at marker
delta to limit
step and swept scans
report generation

VNA Mode
Measurement Setup
RSA5032N RSA5065N
Frequency Range
10 MHz~3.2 GHz 10 MHz~6.5 GHz
Measurement Type Reflection(S11), Transmission(S21), Distance-to-fault (DTF)
Measurement Bandwidth 1 kHz~10 MHz（in 1-3-10 sequence）
Data Points 101~10001; default 201
Trace Type mem, math, clear write, average, max hold, min hold,
Number of Markers 8
Mechanical Calibration Kit Open, Short, Load, Through; User Calibration Kit
Transmission Measurement S21
Port Output Power -10 dBm (nom.)
Format Lin Mag, Log Mag, Phase, Group Delay
Magnitude Range -500 G to 500 G
Magnitude Resolution Log: 100f; Lin 1a
S21, RBW=10 kHz, Port1 level=0 dBm, Log Mag, Average=50
Dynamic Range
80 dB (nom.)
Reflection Measurement S11
Port Output Power -10 dBm (nom.)
Lin Mag, Log Mag, Phase, Group Delay, SWR,
Format Smith Chart (Lin/Phase, Log/Phase, Real/Imag, R+j*X, G+j*B),
Polar Chart (Lin/Phase, Log/Phase, Real/Imag)
Magnitude Range -500 G to 500 G
Magnitude Resolution Log: 100f; Lin 1a
VSWR Range -500 G to 500 G
Corrected Directivity S11, Log Mag, Average=50
(With CK106A) ＞ 40 dB (nom.)

Measured return loss of RSA5000N port 1 Measured return loss of RSA5000N port 1

14
Distance to Fault（DTF）
Port Output Power 0 dBm (nom.)
Format Lin Mag, Log Mag, SWR
Maximum Distance (meters) 8.0X1010 x Velocity Factor/Span
Fault Resolution in meters 1.5x108 x Velocity Factor/Span
Windows Gaussian, Flattop, Rectangular, Hanning, Hamming
Velocity Factor 0.1~1

General Specifications
Display
Type capacitive multi-touch screen
Resolution 1024 × 600 pixels
Size 10.1''
Color 24-bit color
Printer Supported
Protocol network printer
Mass Memory
Internal Storage 512 MB (nominal)
Mass Memory
External Storage USB storage device (not supplied)
Power
Input Voltage Range, AC 100 V to 240 V (nominal)
AC Frequency 45 Hz to 440 Hz
Power Consumption 55 W (typical), max. 90 W with all options
Environment
Operating Temperature
0℃ to 50℃
Range
Temperature
Storage Temperature
-20℃ to 70℃
Range
0℃ to 30℃ ≤ 95% RH
Humidity
30℃ to 40℃ ≤ 75% RH
Altitude Operating Height below 3,048 m (10,000 feet)
Electromagnetic Compatibility and Safety
complies with EMC Directive 2014/30/EU,
complies with or above the standard specified in IEC61326-1:2013/EN61326-1:2013 Group 1 Class A
CISPR 11/EN 55011
IEC 61000-4-2:2008/EN
±4.0 kV (contact discharge), ±8.0 kV (air discharge)
61000-4-2
IEC 61000-4-3:2002/EN
3V/m (80 MHz to 1 GHz); 3V/m (1.4 GHz to 2 GHz); 1V/m (2.0 GHz to 2.7 GHz)
61000-4-3
EMC IEC 61000-4-4:2004/EN
1 kV power
61000-4-4
IEC 61000-4-5:2001/EN 0.5 kV (phase-to-neutral voltage); 1 kV (phase-to-earth voltage);
61000-4-5 1 kV (neutral-to-earth voltage)
IEC 61000-4-6:2003/EN
3 V, 0.15 to 80 MHz
61000-4-6
IEC 61000-4-11:2004/ voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during 25 cycles
EN 61000-4-11 short interruption: 0% UT during 250 cycles
complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16
Safety
and CAN/CSA-C22.2 No. 61010-1-12+ GI1+ GI2
Samples of this product have been type tested in accordance with RIGOL's reliability
test regulations and verified to be robust against the environmental stresses of
Environmental Stress storage, transportation, and end-use; those stresses include, but are not limited to,
temperature, humidity, shock, and vibration. The test methods are compliant with
standards specified in GB/T6587 Class 2 and MILPRF-28800F Class 3.

15
 Size
410 mm × 224 mm × 135 mm
(W x H x D)
(16.14'' × 8.82'' × 5.32'')
Weight
Without Tracking Generator 4.65 kg (10.25 lb)
With Tracking Generator 4.95 kg (10.91 lb)
Calibration Interval
Recommended Calibration Interval 18 months

Input/Output
Front Panel Connector
Impedance 50 Ω (nominal)
RF Input
Connector N-type female
Impedance 50 Ω (nominal)
TG Output
Connector N-type female
Internal/External Reference
Frequency 10 MHz
Output Level +3 dBm to +10 dBm, +7 dBm (typical)
Internal Reference
Impedance 50 Ω (nominal)
Connector BNC female
Frequency 10 MHz ± 5 ppm
Input Level 0 dBm to +10 dBm
External Reference
Impedance 50 Ω (nominal)
Connector BNC female
External Trigger Input/Output
Impedance ≥ 1 kΩ (nominal)
External Trigger Input 1 Connector BNC female
Level 5 V TTL level
on trigger input ≥ 1 kΩ (nominal)
Impedance
on trigger output 50 Ω (nominal)
External Trigger Input 2/Trigger Output
Connector BNC female
Level 5 V TTL level
IF Output
Frequency 430 MHz ± 20 MHz (nominal)
RF input power (PRFin) ≤ -10 dBm, attenuation = 0,
preamp off.
Amplitude 50MHz, PRFin ± 4 dB (nominal)
IF Output
other frequency, P RFin ± 4 dB + RF frequency
response (nominal)
Impedance 50 Ω (nominal)
Connector SMB male
Communication Interface
Connector A plug
USB Host (4 ports)
Protocol version 2.0
Connector B plug
USB Device
Protocol version 2.0
Connector 100/1000Base, RJ-45
LAN
Protocol LXI Core 2011 Device
Connector A plug
HDMI
Protocol HDMI 1.4b

16
 Order Information
Description Order No .
Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz RSA5032
Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz RSA5065
Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz (include TG) RSA5032-TG
Model
Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz (include TG) RSA5065-TG
Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz (include TG and VNA) RSA5032N
Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz (include TG and VNA) RSA5065N
Standard Quick Guide (hard copy) -
Accessories Power Cable -
Vector Signal Analysis Measurement Application RSA5000-VSA
EMI Measurement Application RSA5000-EMI
Preamplifier (PA) RSA5000-PA
High Stability Clock OCXO-C08
Option Real-time/Analysis Bandwidth 40 MHz RSA5000-B40
Advanced Measurement Kit RSA5000-AMK
Spectrum Analyzer PC Software Ultra Spectrum
S1210 EMI Pre-compliance
EMI Pre-compliance Test Software
Software
High-performance Network Analysis Calibration Kit(frequency range: DC to 6.5 GHz) CK106A
Economical Network Analysis Calibration Kit(frequency range: DC to 1.5 GHz) CK106E
Include: N-SMA cable, BNC-BNC cable, N-BNC adaptor, N-SMA adaptor, 75 Ω-50 Ω adaptor,
DSA Utility Kit
900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz antenna (2pcs)
Include: N(F)-N(F) adaptor (1pcs), N(M)-N(M) adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs),
N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F) adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs), RF Adaptor Kit
BNC T type adaptor (1pcs), 50 Ω SMA load (1pcs), 50 Ω BNC impedance adaptor (1pcs)
Include: 50 Ω to 75 Ω adaptor (2pcs) RF CATV Kit

Optional Include: 6 dB attenuator (1pcs), 10 dB attenuator (2pcs) RF Attenuator Kit

Accessories 30 dB high-power attenuator, with the max power of 100 W ATT03301H
N(M)-N(M) RF Cable CB-NM-NM-75-L-12G
N(M)-SMA(M) RF Cable CB-NM-SMAM-75-L-12G
VSWR Bridge, 1 MHz to 3.2 GHz VB1032
VSWR Bridge, 2 GHz to 8 GHz VB1080
Near-field Probe NFP-3
Rack Mount Kit RM6041
USB Cable CB-USBA-USBB-FF-150

Warranty
Three years for the mainframe.

17
HEADQUARTER EUROPE NORTH AMERICA JAPAN
RIGOL TECHNOLOGIES CO., LTD. RIGOL TECHNOLOGIES EU GmbH RIGOL TECHNOLOGIES, USA INC. RIGOL TECHNOLOGIES JAPAN, LLC
No.8 Keling Road, New District,Suzhou, Lindbergh str. 4 8140 SW Nimbus Ave. MJ Bldg. 3F, 1-7-4 Minato, Chuou-ku,
JiangSu,P.R.China 82178 Puchheim Beaverton, OR 97008 Tokyo, Japan 104-0043
Tel:+86-400620002 Germany Tel: +1-877-4-RIGOL-1 Tel: +81-3-6262-8932
Email:info@rigol.com Tel: +49-89/89418950 Fax: +1-877-4-RIGOL-1 Fax: +81-3-6262-8933
Email: info-europe@rigol.com Email: info@rigol.com Email: info-japan@rigol.com

RIGOL® is the trademark of RIGOL TECHNOLOGIES CO., LTD. Product information in this document subject to update without notice. For
the latest information about RIGOL's products, applications and services, please contact local RIGOL Channel Partners or access RIGOL
official website: www.rigol.com

DSD07100-2021-11