Sandvik DP series
Unleash the power
Proven productivity
Rock-steady power.
For the toughest drilling jobs
Are you looking for a drill with the power and control to handle the
toughest conditions in a mine or a quarry? Then take a close look at
the Sandvik DP surface top hammer rigs (previously known as Tamrock
Pantera Rock Pilot). These unique drilling machines have the power to
make their way through your most difficult drilling tasks — including soft
formations and broken rock — and with the advanced Rock Pilot system
that power is always under your complete control.
The DP series is at its best in production drilling in quarries and open pit
mines, pre-splitting, development works, sampling and pit wall drainage
POWER AND PERSEVERANCE. INVINCIBLE COMBINATION
Sandvik DP series supplies the best value in the 76 – 152 mm (3”-6”) hole
size range, efficiently cutting down your production costs. The DP rigs are
built with productivity as the target; they offer the widest hole range, a
choice of three high capacity rock drills and a large selection of rock tools.
Their Powerful CAT diesel engines, robust construction, oversized
components and strong feed provide excellent penetration, straight
drilling, and improved steel life. When you need high production and
high quality in every hole you drill, the Sandvik DP is the ideal solution.
TARGETING AT DRILL EXCELLENCE
Our target at Sandvik is to design drills that do
their individual jobs exceptionally well. Therefore,
our engineers are constantly exploring the pos-
sibilities for technology and process development
at job sites, in the offices, at the factories.
Reliability second
to none
The DP series offers a choice of three proven powerful drifters, HL800T,
HL1010 and HL1560T, supplying fast penetration in the hole range of
76 – 152 mm (3 - 6”). Together with Sandvik Rock Pilot control system
INVINCIBLE SYSTEM
and drilling tools, they provide outstanding tool economy and low total
Sandvik GT60 tools for 92 – 152 mm hole range are drilling cost as well as ensure excellent hole quality and the best possible
especially designed for DP1500/DP1100 rigs. Together
blasting results.
they make an invincible combination that optimizes
the energy transfer and guarantees fast penetration.
ROCK PILOT OFFERS TOP-CLASS CONTROL
Sandvik’s Rock Pilot system provides the ultimate in drilling control.
Whatever the drilling task, the superfast control system adjusts drilling
power automatically, reacting to changing rock formations and sending
the optimal amount of power to the rig’s drill rods.
Collaring phase goes smoothly and rapidly with the Rock Pilot — it goes
down the hole all the time without any back and forth pumping. As a
result, you will drill more holes — and straighter holes — than ever
before, even in the worst drilling conditions.
The Sandvik DP with Rock Pilot control system is simple to operate.
The machine is equipped with intuitive controls that allow the operator to
finetune the system manually when meeting especially unusual conditions.
Basic settings are practically located on the control block.
More holes than ever before
TECHNICAL DETAILS
DP800 Hole diameter 76 - 127 mm (3 - 5”)
Drill steel 45, 51 mm (1 3/4”, 2”)
Weight 18 500 kg (40 800 lb)
Width 2,5 m (8’-2”)
Height 3,2 m (10’-6”)
Length 10,5 m (34’-5”)
Rock drill HL800T, 21 kW (28.2 hp)
Tramming speed 1,7/3,5 km/h (1.1/2.2 mph)
On-board 9,6 m3/min/ up to 10 bar
compressor (339 cfm/min/145 PSI)
Dust collector 35 m3/min at 1200 mm vacuum H2O
(1236 cfm/min at 47” vacuum H2O)
Engine CAT C9, 205 kW (275 hp), 2 200 rpm
DP900 Hole diameter 89 - 127 mm (3½ - 5”)
Drill steel 51, 60 mm (2”, 2 ”)
Weight 18 700 kg (41 200 lb)
Width 2,5 m (8’-2”)
Height 3,2 m (10’-6”)
Length 10,5 m (34’-5”)
Rock drill HL1010, 21 kW (28.2 hp)
Tramming speed 1,7/3,5 km/h (1.1/2.2 mph)
On-board 9,6 m3/min/ up to 10 bar
compressor (339 cfm/min/145 PSI)
Dust collector 35 m3/min at 1200 mm vacuum H2O
(1236 cfm/min at 47” vacuum H2O)
Engine CAT C9, 205 kW (275 hp), 2 200 rpm
DP1100 Hole diameter 89 - 140 mm (3½ - 5½”)
Drill steel 51, 60 mm (2”, 2 ”) MF rods
76, 87 mm (3”, 3½”) Tubes
Weight 18 800 kg (41 500 lb)
Width 2,5 m (8’-2”)
Height 3,2 m (10’-6”)
Length 10,5 m (34’-5”)
Rock drill HL1010, 25 kW (33.5 hp)
Tramming speed 1,7/3,5 km/h (1.1/2.2 mph)
On-board 14 m3/min/ up to 10 bar
compressor (494 cfm/min/145 PSI)
Dust collector 35 m3/min at 1200 mm vacuum H2O
(1236 cfm/min at 47” vacuum H2O)
Engine CAT C9, 224 kW (300 hp), 2 100 rpm
The Sandvik TIM measuring system guarantees hole
accuracy. It is available in three models.
DP1500 Hole diameter 89 - 140 mm (3½ - 5½”)
Drill steel 51, 60 mm (2”, 2 ”) MF rods • TIM 2305 for laser-level based hole inclination and depth
76, 87 mm (3”, 3½”) Tubes
Weight 19 200 kg (42 300 lb)
• TIM 2303 for hole inclination and depth
Width 2,5 m (8’-2”) • TIM 2302 for hole inclination
Height 3,2 m (10’-6”)
Length 10,5 m (34’-5”)
Rock drill HL1560T, 28 kW (37.5 hp)
Tramming speed 1,7/3,5 km/h (1.1/2.2 mph)
On-board 14 m3/min/ up to 10 bar
compressor (494 cfm/min/145 PSI)
Dust collector 35 m3/min at 1200 mm vacuum H2O
(1236 cfm/min at 47” vacuum H2O)
Engine CAT C11, 261 kW (350 hp), 2 100 rpm
DP1524 Boom Fixed*
Hole diameter 89 - 140 mm (3½ - 5½”)
Drill steel 60 mm (2 ”) MF rods
Hole diameter 102 - 152 mm (4 - 6”)
Drill steel 87 mm (3½”) Tubes
Weight 19 500 kg (43 000 lb)
Height 3,7 m (12’-1”)
Straight drilling Length 10,9 m (35’-8”)
*DP800, DP900, DP1100, DP1500 are equipped with telescope booms
Other technical details as DP1500
Well-thought-out features.
Productive operators
Hole spotting is fast and easy with the Sandvik DP series. The rigs are
equipped with an extendable telescopic boom and direct hydraulic
controls for boom movements. The cabin offers an all-around view to the
spotting area through its expansive safety glass, and adding to the visibility
are seat or side panel integrated controls.
Drilling goes smoothly with the DP series simple, easy-to-use joysticks that
put stepless control of the power at the operator’s fingertips. Comfortable
and practical joystick control provides fast and efficient rod handling as well.
Top productivity
The DP series cabin offers total operator safety, ergonomy and comfort. It is
ROPS and FOPS tested and provides a climate-controlled environment that
filters out dust and keeps noise levels below 80 dB (A).
STRAIGHTFORWARD SERVICE. MORE DRILLING TIME.
The Sandvik DP series supplies ease of service. All cover panels can be
opened and coolers are practically placed in a vertical direction. The
hydraulic valve block with measuring ports is easily accessible, and the
machine is equipped with safety features such as warning lights, safety
shut-downs and wear indicators.
Excellent visibility
Fast fill connections for fuel, water, engine coolant as well as hydraulic and
engine oil is available optionally.
Strong backup keeps your
business running smoothly
SUPPORT WHERE IT COUNTS. ON THE JOB SITE
Service is, of course, a matter of being available when problems occur. But we
at Sandvik prefer seeing it more as a question of being proactive. Investment
GLOBAL NETWORK
in preplanned service and tools like Sandvik SanRemo and Security+ warranty
Sandvik has 3 500 program will help you protect your business from unexpected risks.
service technicians spread
Sandvik’s SanRemo service system includes a productivity gauge and a GPS
in every corner of the
world. They are only a locator. The system tells you the load put on a machine and allows you to com-
local phone call away pare information on different machines. You can plan your production, ser-
when you need help. vices, schedules and transportations well ahead. Moreover, Sandvik can supply
you with a spare parts recommendation. You will also get a maintenance card
that increases the resale value of your drill. SanRemo runs on a standard PC.
The Sandvik Security+ warranty program, extends the standard one-year war-
ranty to a two year protection period. You can choose from three levels of cover-
age: Platinum, Gold and Silver – whichever you feel best suits your needs.
Sandvik service contracts let you concentrate on your main processes. They
come in different levels so you can choose a program that meets your particu-
lar needs. Sandvik drill steel, ready-made maintenance kits and genuine spare
parts ensure trouble-free drilling and maximize productivity.
THERE IS ALWAYS SOMETHING MORE TO KNOW
The new Sandvik operator training concept offers you authorized trainers, sim-
Smart services benefit your bottom line
ulator training and a modular curriculum – you can choose which modules suit
best for your purposes. You can practice your skills in the simulator without
any risks to you or the rig. The simulator brings out the best in every driller.
Furthermore, simulator training keeps the actual machines in productive work.
The Sandvik SimQuarry™ is a smart but practical simulation tool for rock
excavation process optimization. This tool helps you define the best combina-
tion of equipment, finetune your excavation and discover the ways of improv-
ing your profitability. If you feel that you would need to learn more about the
overall quarry or open pit process, the Sandvik Quarry Academy is an excellent
option. On this training course you will improve your competence in quarry or
open pit management.
Productivity
in Action
Sandvik is a high-technology engineering group with
world-leading positions in selected areas – tools for metal
working, advanced materials technology, and mining and
construction. We employ more than 47 000 people and
are represented in 130 countries.
0908-854-GB-5000. Copyright Sandvik Mining and Construction Oy. Sandvik reserves the right to alter specifications without notice. Note: machines shown in pictures are equipped with options.
Sandvik Mining and Construction represents one third of
the overall Sandvik Group and serves a broad range of
customers in construction, mineral exploration, mining
and bulk materials handling. Our construction expertise
covers quarrying, tunneling, demolition and recycling, and
other civil engineering applications. Our mining products
and services support customers on the surface and under
ground, in all mineral, coal and metal mining applications
from exploration to ore transportation.
SANDVIK MINING AND CONSTRUCTION, P.O.Box 100, 33311 Tampere, FINLAND, Tel. +358 205 44 121, Fax + 358 205 44 120, www.sandvik.com
