Scribd
Upload
1K views16 pages

Build Guide - Landy Mini

This document provides build instructions for a 3D printed scale model Landy Mini in 3 sentences or less: The Landy Mini build guide outlines the assembly of a 3D printed scale model Landy Mini using various plastic parts, screws, and PLA filament in multiple colors. Instructions include an overview of the printing and part preparation, along with step-by-step directions for assembling the interior, chassis, axles, wheels, body, details, bumpers, hood, and roof. Completing the build results in a 385g, 22.6cm scale model Landy Mini ready for play.

Uploaded by

Chandrabhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views16 pages

Build Guide - Landy Mini

This document provides build instructions for a 3D printed scale model Landy Mini in 3 sentences or less: The Landy Mini build guide outlines the assembly of a 3D printed scale model Landy Mini using various plastic parts, screws, and PLA filament in multiple colors. Instructions include an overview of the printing and part preparation, along with step-by-step directions for assembling the interior, chassis, axles, wheels, body, details, bumpers, hood, and roof. Completing the build results in a 385g, 22.6cm scale model Landy Mini ready for play.

Uploaded by

Chandrabhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

Build Guide - Landy Mini

3D printed scale model.

www.3dsets.com
3D Sets Facebook

Version 1.0

1
Landy Mini – version 1.0 technical specs.
● Dimensions: 22,6 cm length, 11.1 cm width, 13 cm height
● Model weighs roughly 385 g
● Suspension with 3D printed springs for realistic terrain behavior
● Hood can be opened, reveals engine
● Parts are connected by screws or click-on system, no glue required
● Not suitable for small childs – contains small parts (screws) and plastic parts may break
under excessive load resulting sharp edges or debris. Recommended for 5+.

Before you start printing and building:


● For best results use printing filament in multiple colours. We are recommending black color for chassis and
tyres, white for body details and roof, beige/brown for interior parts and any color for car body.
● You can source the screws required for the assembling from the “Spare” bag, which comes with your Prusa
Printer. Screw sizes required for assembling the model are specified on the next page.
● Use higher printing temperatures – use about 210-215°C for PLA to have firm layer adhesion!

2
Landy Mini – version 1.0: Required hardware & filament
Screws and nuts (in metric size). You can find all required screws it the Prusa Printer “Spare” bag:

https://shop.prusa3d.com/en/mk3mk3s/980-mk3s-fasteners-spare-bag.html

1x

3x

To print the model you will need about 450g of printing filament, model is tested with PLA material.

3
Landy Mini – printing plates overview
1 Interior - color A 2 Chassis - color B - black 3 Tyres - color B - black

4 Body Springs Arms - color C - any 5 Roof Rims Details - color D - white 6 Body - color C - any

4
Parts Postprocessing
Before you start building the model, carefully remove printing supports (marked red) integrated
into specific parts rendered below. You can use pliers and a sharp knife to make the procedure
easier. Be very careful as you can harm yourself!

supports marked in
red has to be removed

5
Landy Mini: Interior

1x

6
Landy Mini: Chassis

2x

7
Landy Mini: Front/Rear Axle
Front and Rear axle are identical. Repeat this step 2x.

Press and click


the ball joint
into the hole.

2x

8
Landy Mini: Assembling Axles with the Chassis

Place the Rear Seats


on position before
the screws.

9
Landy Mini: Assembling Wheels
All wheels are identical. Repeat this step 4x.

Press and click


the rim into
the tyre hole.

10
Landy Mini: Mounting Wheels on Axles

Carefully slide the


wheels on the
shaft ends until
you hear a click.

11
Landy Mini: Body & Details

2x

12
Landy Mini: Assembling Body with Chassis

Carefully slide the


body on the
chassis until you
hear a click.

13
Landy Mini: Bumpers

1x 3x

14
Landy Mini: Hood and Roof

Carefully slide the hood on


the body.

15
Landy Mini: Ready to play!

16

You might also like