Digital Patterns
Designed by Steve Good
Hundreds of free Patterns
Stencil Printer
Jigsaw Puzzle Templates
DVD’s
Key Chain Pattern Printer
Video Tutorials
Reviews
Community Forum and more.
If you would like
to donate click
here. No Paypal
account needed.
Note to commercial print employees: I give my permission to print as many of this pattern book as your customer requires.
steve@stevedgood.com Copyright Steve Good 2019
2017
General Pattern Information
You may use this pattern to make as many of
the project as you like. You are free to use any
technique including mass production to build
the project. The pattern may be copied and
given to others provided the entire book is kept
intact. You may not sell the pattern or include it
in another commercial package of any type.
Steve Good retains the right to the pattern. If
you have any questions about the use of this
pattern please contact me at
steve@stevedgood.com
When printing this pattern it is important to print Printing Instructions
it full size. When you bring up the print dialog
box look in the “Page Sizing & Handling”
section. Make sure the “Actual Size” is selected
before you hit print.
You also only need to print the page/s you
need. After the print dialog opens look for the
“Pages to Print” section. You can print the
current page or a range of pages. This will help
save ink by not printing the title/instruction
pages.
This model biplane is cut from 1/4” and 1/8” Baltic birch plywood.
I used CA glue and spray activator to speed up assembly.
Wheel Assembly
The wheel axle is 1/4” dowel cut to 3 1/8” length.
You need two drill bits. 17/64” and 1/4”. The holes in the
struts are 17/64” so the axle will rotate. The other holes are
1/4” to lock the piece to the axle.
The hole in the prop is 17/64” so it will rotate.
The other holes in the prop assembly are 1/4” so
they lock to the shaft. The shaft is 1/4” dowel cut to
about 1”. Drill a 1/4” diameter hole in the front of the biplane
to accept the shaft.
1/4” Thick
Strut positions
Fuselage
1/8” Thick
Front Wheel Assembly
Prop Assembly
1/8” Thick 1/4” Thick
17/64” Hole
1/4” Hole
1/4” Hole
17/64” Hole
1/8” Thick
1/8” Thick
Wing Struts 1/4” Thick
