Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.
cn
H.265 X.Encoder
Prducts instruction
1. environment configuration .................................................................................... 1
1.1. hardware environment ......................................................................... 1
1.2. software environment .......................................................................... 2
2. encoding settings.................................................................................................... 4
2.1. encoding settings .................................................................................. 4
3. system settings ....................................................................................................... 6
3.1. network settings ................................................................................... 6
3.2. password settings ................................................................................. 7
3.3. system update ...................................................................................... 7
3.4. to factory settings ................................................................................. 8
1. environment configuration
1.1. hardware environment
Interface and key name according to the picture from left to right:
① 12V power supply；
② SDI input；
③ reset：Long press 10 seconds and back to factory Settings；
④ network port： the address is 192.168.1.168 by default
Connect the interface as shown in the figure below. Plugged into a power
supply,HDMI port, network port.
www.celtech.com.cn 1/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
1.2. software environment
1.2.1. login the setting background
Open browser and input address 192.168.1.168.Open the web sites, then enter
account and password In the pop-up dialog box (both default account and password
are admin).As shown in figure 1, enter the web site home page is shown in figure 2.
figure1
1.2.2. check the video signal
As shown in Figure 2, has collected 0 video frames or refresh the page this did not
increase, indicating that there is no access to video signal. Check whether the HDMI
source of the equipment is connected, if not 0 and refresh the page and Video
frames in the increase is said to have a video signal.
www.celtech.com.cn 2/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
figure2
1.2.3. check the stream address
As shown in Figure 3, the contents of the red box for video stream address.
figure3
1.2.4. play video
In the case of having a video signal to open the VLC player(VLC player
download address :http://www.videolan.org/),According to figure 5, figure 4
set the code stream address, click play, you can play the device code out of the
video stream.
www.celtech.com.cn 3/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
figure4
figure5
2. encoding settings
2.1. encoding settings
Click on the encoding settings →Main stream →Set the parameters
→Click Settings.As shown in figure 6
www.celtech.com.cn 4/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
figure6
figure7
Set to restart the system after successful ,Click system settings→click reboot(After
the restart, please refresh the page after wait for 30 seconds ).
www.celtech.com.cn 5/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
3. system settings
3.1. network settings
Click system settings →Network settings →Set the parameters
→Click Settings ,As shown in figure 9
figure9
Click on the restart(After the restart, please refresh the page after wait for 30
seconds ).
www.celtech.com.cn 6/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
3.2. password settings
Click system settings→Password settings →Click Settings ，As shown in figure11
figure11
Click on the restart(After the restart, please refresh the page after wait for 30
seconds ).
3.3. system update
Click system settings→click System update →click browse→Choose to update the
system files →Click upload, As shown in figure 13.
figure13
Click on the restart(After the restart, please refresh the page after wait for 30
seconds ).
www.celtech.com.cn 7/8
Beijing Celtech Technology Co.,Ltd. Contact Us: xiangning.lai@celtech.com.cn
3.4. to factory settings
Click system settings→click Restore factory settings→click Reset .As shown in
figure 15.
figure15
Click on the restart(After the restart, please refresh the page after wait for 30
seconds ).
www.celtech.com.cn 8/8
