Scribd
Upload
495 views2 pages

N62 Oil Pressure Switch R&R

The document provides instructions for removing and replacing the oil pressure switch on BMW N62 and N62TU engines. The oil pressure switch is located on the front right side of the cylinder head on bank 1 to 4. To replace it, one must first turn off the ignition and remove intake components if necessary. Then the plug connector can be removed and the switch unscrewed, having a cloth ready to catch any emerging oil. Proper tightening torque is required on reinstallation and the engine oil level should be checked afterwards.

Uploaded by

Leiden O'Sullivan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
495 views2 pages

N62 Oil Pressure Switch R&R

The document provides instructions for removing and replacing the oil pressure switch on BMW N62 and N62TU engines. The oil pressure switch is located on the front right side of the cylinder head on bank 1 to 4. To replace it, one must first turn off the ignition and remove intake components if necessary. Then the plug connector can be removed and the switch unscrewed, having a cloth ready to catch any emerging oil. Proper tightening torque is required on reinstallation and the engine oil level should be checked afterwards.

Uploaded by

Leiden O'Sullivan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BMW TIS - 12 61 280 Removing and

installing/replacing oil pressure switch (N62,


N62TU)
12 61 280 Removing and
installing/replacing oil
pressure switch (N62,
N62TU)
Necessary preliminary
tasks:
· Switch off ignition
· E65/E66 only: Remove
intake filter housing
· E53 only: Remove intake
hood with air intake hose
Warning!
Scalding hazard!
Only perform this task on
an engine that has cooled
down.
Installation location:
Cylinder bank 1 to 4 on
cylinder head, front right.
Engine oil may emerge
when oil pressure switch is
replaced; have a cleaning
cloth ready.
Release plug connector (1)
and pull off.
Unscrew oil pressure switch
②.
Tightening torque Oil
pressure, oil temperature,
oil level displayDisplay: oil
pressure, oil temperature,
oil levelEngine oil pressure,
engine oil temperature, oil
condition display12 61 1AZ .
Installation:
Check engine oil level, top
up engine oil if necessary.

You might also like