ENGINEERING MATERIAL SPECIFICATION

RESTRICTED SUBSTANCE MANAGEMENT STANDARD WSS-M99P9999-A1

1. SCOPE

The purpose of this Standard is to inform suppliers to Ford Motor Company, and Ford personnel, of
restrictions pertaining to certain substances. By regulation or by Ford direction, these substances shall be
restricted in or excluded from parts, materials, equipment, machinery and/or tooling, hereinafter referred to as
"product(s)", supplied to and/or manufactured by Ford or intended for use in Ford products. This Standard
supplements but does not supersede the responsibility of each supplier to comply with laws and regulations
for the receiving Ford location(s). It is the duty of all Suppliers of product to Ford to comply with this
Restricted Substance Management Standard.

2. APPLICATION

All products supplied to Ford (all Brands, world-wide) must comply with the latest version of this Standard,
regardless of when they were originally approved.

This Standard replaces and supersedes specifications SK-M99P9999-A, WSS-M99P9999-A2,

WSS-M99P9999-A3, Jaguar Cars JAS.01.01.17, and Volvo Car Corporation Standard 1009,1 ('Black List')
and 1009,11 ('Grey List'). When any of those numbers appear on other documents, the requirements of this
Standard apply. References to "Ford" within this document shall be understood to include Jaguar Cars,
Aston Martin Lagonda, Volvo Car Corporation, Land Rover, and Mazda Motor Corporation (Mazda - "for
production parts only").

This Standard is normally reissued (with or without revision) in the first quarter, of each calendar year. The
applicable version is the document with the current year shown in the revision box - page 1.

The 2006 RSMS reporting timing covers 2007 and forward model years (MY). The timing
requirements for prior model year production and service parts are covered by earlier versions of
RSMS. Items already reported which contain new substances listed in this revision, need to be
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

resubmitted to include these new substances. Suppliers who have not complied with earlier
reporting requirements are expected to submit past due information immediately.

3. REQUIREMENTS

The primary intent of this Standard is to control restricted substances within formed articles. However, it
should be noted that all non-dimensional materials (e.g., chemicals) and "hazardous articles," which are
intrinsically hazardous, or which form or release hazardous substances during use, recycling or disposal
(e.g., "dry" friction materials, welding rods or wires, solders, heat resistant materials), are subject to separate
detailed evaluation and clearance by Ford Toxicology and the Environmental Quality Office (EQO) in addition
to the requirements of this Standard. A web-based tool (GMAP-e1291) has been launched in N. America
(other regions to follow) via the Covisint - Ford Supplier Portal to support this process
https://web.emm.ford.com/e1291/menu/. This clearance must be completed prior to supply of product to
Ford. Details of any brand-specific direction and this process can be obtained by contacting the appropriate
regional Toxicology or Environmental Quality Office (EQO) (see Appendix 2). It is the duty of all Suppliers of
product to Ford to comply with this Restricted Substance Management Standard.

Date Action Revisions

2006 02 08 Revised 2006 changes are in highlighted in grey E. Rezendes

2005 03 08 Revised 2005 changes are in highlighted in gray E. Rezendes

1984 01 11 Activated E. Rezendes

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 1 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

3.1 ALL PRODUCTS

Section 3.1 relates to general requirements affecting all product supplied to Ford. Individual
restricted substances are alphabetically listed, with the type of restriction indicated, in Table 1,
and are also referred to indirectly on a hazardous properties basis in 3.1.5.

3.1.1 Paragraph deleted. Refer to Section 4.

3.1.2 In addition to information required for compliance to this Standard, Supplier, upon
request, shall provide the composition (chemical identity of each constituent and its
proportion by weight) of products supplied or proposed to be supplied and all
TOXICITY, HEALTH, SAFETY and DANGEROUS GOODS TRANSPORTATION
data/guidance to the requesting Ford Toxicology and the Environmental Quality
Office. Prior to making any change to the composition or hazard labeling of
such products, the supplier shall advise the regional Ford Toxicology and
Environmental Quality office.

3.1.3 Supplier, upon request, shall disclose information for assessment of disposal or
effluent treatment if product constituents are anticipated to be released into AIR,
WATER OR SOIL, or require special declaration or control.

3.1.4 All products shall be supplied in compliance with the regulations on substance
REGISTRATION, NOTIFICATION OF NEW CHEMICALS/SUBSTANCES,
PACKAGING AND LABELING which are in place in the Ford receiving location(s)
where the products are supplied.

3.1.5 Non-dimensional materials (e.g., chemicals) and "hazardous articles" that contain
substances which have been identified as having any CARCINOGENIC,
MUTAGENIC, REPRODUCTIVE TOXICITY, ECOTOXICITY, or SENSITIZING
PROPERTIES (see Definitions, Appendix 1), shall not be supplied without prior
notification of these characteristics to Ford Motor Company. (e.g. via the GMAP-
e1291approval process, where applicable, at https://web.emm.ford.com/e1291/
menu/.

3.1.6 Paragraph deleted, addressed in para 3.1.5.

3.1.7 Paragraph deleted addressed in Table 1

3.1.8 Products of or from ENDANGERED SPECIES must not be supplied to Ford Motor
Company in any form.

3.1.9 Suppliers of facility equipment and tooling (e g., conveyers, presses etc), that
contain any of the substances listed in Table 1 as "prohibited" or "prohibited above
the threshold concentration" must submit the Supplier Restricted Substance
Information Reporting Form (Attachment 1) and conform to section 4.5.1 prior to
shipment to Ford.

3.1.10 Suppliers shall not supply products containing substances that will, in use,
adversely affect the vehicle interior with respect to human health including
allergenic reactions without notification and acknowledgement from the appropriate
Ford Motor Company's Materials Engineering & Testing Department.

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Copyright Ford Motor Company

Printed copies are uncontrolled
Provided by IHS under license with FORD Copyright © 2006, Ford Global Controls/5912197100
Licensee=Johnson Technologies, LLC Page 2 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

3.1.11 Radioactivity contamination should meet "Unconditional Use Clearance Level"

requirements consistent with International Atomic Energy Agency (IAEA) and the
Commission of European Communities (CEC) standards for individual radionuclides IAEA-
TECDOC-855 (1996) & Safety Series RS-G-1.7 (2004).

http://www-pub.iaea.org/MTCD/publications/PDF/te_855_web.pdf
http://www-pub.iaea.org/MTCD/publications/PDF/Pub1202_web.pdf

Note: Radioactive sources or devices used in manufacturing processes are exempted.

For example, the sources may include process control and production applications such
as density, level, thickness, moisture, back-scatter gauges; locators, coating
measurement, radiographic installation, air ionizers, electron beam welders, tool failure
detection, and radiation cure installations.

For additional radiation protection information see document Radiation Protection 122
(2000). http://europa.eu.int/comm/environment/radprot/rp-122-en.pdf

3.1.12 All timber products must be sourced from forests that comply with one of the following
requirements:

Certified under the "Forest Stewardship Council' or the "Programme for the Endorsement
of Forest Certification Schemes" or

Declared as sourced from plantation or recycled timber or Licensed under the FLEGT
system (EU Action Plan for "Forest Law Enforcement, Governance and Trade)

3.2 SUBSTANCE RESTRICTIONS

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
3.2.1 Substance Restrictions are identified in Table 1 by substance name, type of restriction,
threshold limit (where applicable), applications affected/exempted, and effective dates.

3.2.2 Substances designated as "Prohibited", (P), shall not be supplied in any products, subject
to the stated directions on content threshold and affected applications.

3.2.3 Substances are designated, as "Declarable", (D), when present in a material or part in a
vehicle, and are legally regulated, projected to be regulated or required to be tracked for
information gathering purposes.

3.2.4 Monomers, catalysts, and accelerators remaining in cured polymeric articles (including
paints) as residual content need not be reported at less than 0.1% by weight per
homogeneous material, unless subject to explicit threshold content limits specified by this
Standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the
basis of the elemental form of the metal.

3.2.5 Specific Chemical Abstracts Service (CAS) numbers for substances listed in this Standard
affecting vehicle parts are illustrated in the current Global Automotive Declarable
Substance List (GADSL, http://www.gadsl.org), also available on the "Ford Supplier
Portal" (FSP), at: <https://portal.covisint.com> and in the "News" section of IMDS at,
<http://www.mdsystem.de/html/en/home_en.htm>. Additional CAS-identified substances
listed in this Standard affecting non-dimensional materials (chemical products) and
"hazardous" articles will be available on the GMAP-e1291 website
(<https://web.emm.ford.com/e1291/menu/index.htm?>). It is the supplier's responsibility to
ensure that they identify all affected substances-some of which may not be specifically
identified in the GADSL or on the GMAP-e1291 website.

Printed copies are uncontrolled

Copyright Ford Motor Company Copyright © 2006, Ford Global Technologies, LLC Page 3 of 38
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

3.2.6 This standard identifies substances and applications that are currently prohibited, as well
as some that will become prohibited at a specified future date. To avoid unnecessary re-
design/testing, new production parts must comply with these future prohibition
requirements during engineering validation gateways based on FPDS/GPDS program
requirements. If engineering validation of new production parts meeting the future
prohibition requirements will not be possible, concurrence by the relevant Program Team
and appropriate Materials Engineering function will have to be sought. This concurrence
does not affect the requirement for all components to comply with the substance dates
shown in Table 1 of this Standard.

3.2.7 For production parts, unless otherwise noted, the Effective Date column of Table 1 reflects
"Put on the Market" dates. This normally reflects when products are delivered to the
distribution area (left the assembly facility) and a transfer of ownership occurred. For
products imported to regions implementing the EU End of Life Vehicle Directive, these
dates reflect customs clearance dates in these regions.

4. RESTRICTED SUBSTANCE AND RECYCLED CONTENT REPORTING

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

SUPPLIERS REPORTED DATA WILL BE USED TO PROVE LEGAL COMPLIANCE.

FOR THE REPORTING OF NON DIMENSIONAL MATERIALS and/or "HAZARDOUS" ARTICLES,

SUPPLIERS ARE REQUIRED TO GO THROUGH THE GMAP-e1291 PROCESS (where applicable).

FOR THE REPORTING OF PRODUCTION PARTS (INCLUDING SERVICE PARTS), FORD MOTOR
COMPANY SUBSCRIBES TO THE GLOBAL AUTOMOTIVE DECLARABLE SUBSTANCE LIST (GADSL,
http://www.gadsl.org )

Suppliers are required to meet the following reporting deadlines for production and service parts:

• Parts for new Programs must be initially reported in IMDS-International Material Data System (100% materials,
type and weight of all materials, and known GADSL substances in the parts) at <FDJ> (Final Data Judgement)
gateway, or equivalent gateway for programs using other Production Development Systems, e.g. Ford
Production Development System (FPDS).
• Parts for new programs must be fully reported in IMDS (initial report data plus all GADSL listed substances,
parts marking, and recycled content) at <PEC> (Preliminary Engineering Completion) gateway, or equivalent
gateway for programs using other Production Development Systems, e.g., FPDS.
• Current production parts should have already been reported in IMDS. If they are not, or if an update is required
(see below), they must be reported immediately.
• Services parts common with production parts and unique service parts must be reported between 8 months
and 4.5 months before Job #1

A Reporting Matrix is shown in Appendix 3 to clarify the appropriate reporting mechanism for suppliers
concerning material and substance content in products supplied to Ford Motor Company.

Printed copies are uncontrolled

Copyright Ford Motor Company
Provided by IHS under license with FORD Copyright © 2006, FordLicensee=Johnson
Global Technologies, LLC
Controls/5912197100 Page 4 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 --`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Copyright Ford Motor Company

Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

4.1 ELECTRONIC REPORTING USING THE INTERNATIONAL MATERIAL DATA SYSTEM (IMDS)
(URL: http://www.mdsystem.com/)

ALL PARTS AND MATERIALS REMAINING ON A VEHICLE AT POINT OF SALE AND ALL
SERVICE PARTS ARE REQUIRED TO BE REPORTED USING IMDS.

Suppliers are required to report:

• All GADSL listed substances (Identity and percent by weight of listed GADSL substances)
• 100% materials, type and weight of all materials
• The reported part weight tolerances shall not be bigger than on the part drawings and shall not
exceed:
+/- 2% for a total calculated weight of > 1 kg
+/- 5% for a total calculated weight between 10 g and 1 kg
+/- 10% for a total calculated weight between 1 g and 10 g

• Certify polymeric parts are appropriately marked (per ISO 11469/1043/1629)

• Percentage of recycled content in polymeric materials

An update of existing IMDS data is required if there is:

• >+/- 10% change in end item part mass or more than 50 grams change
• New material
• >+/- 10% change in mass of a material or more than 50 grams change
• New GADSL listed substance added to a material
• >+/- 10% change in mass of an already reported GADSL substance, or if a change in mass
causes a threshold requirement to be crossed
• Any change in mass (increase or decrease) of ELV metals (Lead, Mercury, Cadmium and
Hexavalent Chromium), exempt and non-exempt applications
• Changes in Polymeric parts marking
• Changes in Recycled content above 10% or more than 50 grams

Suppliers of production/service parts that fall into the above categories must certify compliance to
this standard using the Ford certification page in IMDS.

For training and access registration contact the IMDS-Helpdesk and Service Center:

Europe: + 49 (0) 421 52 56 666, or: ims-eds-helpdesk@eds.com/,

North America: 1 248 267 3460, or imds-eds-helpdesk-nao@eds.com.
Italy: +39 (0) 80 38 53 116, or imds-fiat@eds.com
Japan: +81 3 3797 4212, or jpimdshd@eds.com.
Korea: + 82-2-3782-0827 or imdsk.helpdesk@eds.com

Supplier training is available from Electronic Data Systems (EDS) at the IMDS Service Website.
IMDS contacts are listed in Appendix 2.

4.2 Paragraph deleted.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`--- Page 5 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

4.3 SUBSTANCE DISCLOSURE IN IMDS

All substances contained in "The Global Automotive Declarable Substance List" (GADSL),
MUST be disclosed in IMDS.

• ALL SUBSTANCES IDENTIFIED IN THE GADSL MUST BE IDENTIFIED WITH THE CORRECT
CAS NUMBER WHEN REPORTED IN IMDS (except some Fibers which are not reported by
CAS number).
• If a supplier reports a GADSL substance without the correct CAS number, they will NOT be
fulfilling the requirements of this Standard.
• The use of non-CAS identified substances is acceptable for the reporting of substances NOT
covered in the GADSL
• Paints, polymers, adhesives and sealants etc. must be reported in the cured state.

If the substance you need to report is not available in IMDS, please supply the IMDS Help
Desk with the necessary information, who will update the records accordingly.

Substances listed in RSMS Table 1 and/or GADSL must not be marked or reported as "confidential"
or "secret" when reporting in IMDS.

4.4 PART NUMBER REQUIREMENTS FOR IMDS

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

All Production parts must be reported under the submission for the Tier 1 assembly, using the
OEM released part number. If you supply Tier 2 (or Tier n) parts this data must be sent to your
customer. It is recommended that you use IMDS for data transfer of parts through out the supply
chain.

Service part information is required to be reported individually, per their assigned Ford Engineering
number. The majority of service parts are common with production parts, however service level
details may require additional part reporting information. For production end item assemblies, the
service component parts that make up that assembly MUST also be reported by their respective
engineering numbers, in accordance with Sect. 4.0 of this Specification. Ford Customer Service
Division (FCSD) will require RSMS certification of all service parts and components prior to
distribution of these parts.

Service unique parts, not common with production parts and Past Model service parts, not
previously reported as a production part per the assigned Engineering number, are also required to
be reported in accordance with Sect. 4.0 of this Specification.

Spare parts for servicing vehicles put on the market prior to 1 July 2003 containing Lead, Mercury,
Cadmium and Hexavalent Chromium are exempted from complying with the material restrictions and
reporting requirements, except, for wheel balance weights, carbon brushes for electric motors, brake
linings and convenience light switches, which are still required to be reported and compliant.

For Spare parts for servicing vehicles put on the market after 1 July 2003 containing Lead, Mercury,
Cadmium and Hexavalent Chromium, a final decision of the European Commission is still pending.
However, these parts must comply to the existing legislation valid at the time when the product is put
on the market. In all cases, reporting of substances in all spare parts for servicing vehicles, put on
the market after 1 July 2003, is required.

Remanufactured and re-used service parts are exempted from the Lead, Cadmium and
Hexavalent Chromium prohibition requirements of this standard, provided they were already on the
market at the expiry of an exemption (effective dates as listed in Table 1). All new materials used in
the refurbishment of these parts MUST comply with the substance restrictions contained within this
standard.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 6 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

4.5 PARTS AND MATERIALS THAT REQUIRE DISCLOSURE BY OTHER METHODS (NOT IMDS):

4.5.1 Facility equipment and tooling.

Suppliers of facility equipment and tooling (e g., conveyers, presses etc.) must make sure
that products supplied to Ford containing substances that are listed as Prohibited or
Prohibited above the threshold limit in Table 1 of this Standard is reported to Ford for
resolution, using the Supplier Restricted Substance Information Reporting Form
(Attachment 1). The supplier must also notify (by email) the requester (noted on the
purchase order) and the purchasing buyer of any facility equipment and/or tooling using
any of the above mentioned substances. Products containing prohibited substances
according to Table 1 shall not be shipped to Ford until a signed acknowledgement is

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
received by the supplier, from the Ford Global Material Fastener & Standards Department
Manager (GMF&S). GMF&S will also communicate the acceptance and/or any issues with
the information reported by the supplier to the Ford Motor Company manufacturing activity
requesting the facility equipment and/or tooling.

4.5.2 Non-dimensional materials.

Suppliers of non-dimensional materials, which are not associated within Dimensional

Products, (bulk chemicals, individually packaged chemicals sold separately or included in
service kits), are subject to the restriction requirements of this Standard (RSMS).
Substances listed in this Standard and highlighted in sections 3.1.5, 3.1.7 and 3.1.8 must
be reported (e.g., through the GMAP - e1291 system). Non-dimensional materials for
which full disclosure of RSMS-listed ingredients has been supplied to Toxicology and EQO
Office according to Section 3.1.2 of this Standard, do not require additional reporting, and
will be certified through the GMAP-e1291 system, where applicable.

An update of existing GMAP-e1291 data is required if there are changes in:

• Formulation and/or weight percent of RSMS listed substances.

4.5.3 "Hazardous articles" that do not remain on a vehicle at point of sale, do not require
disclosure in IMDS.

4.6 PARTS AND MATERIALS THAT REQUIRE REPORTING BOTH IN IMDS AND GMAP- E1291

Non-dimensional Materials Contained in or on Dimensional Products such as; greases, lubricants,

rust preventives, as well as paints, adhesives and sealants, etc are required to be reported in IMDS
in the cured state, and via GMAP-e1291 (where applicable), if known or reasonably anticipated to
pose a health or environmental hazard during normal handling, use, service or disposal (in the as
received or uncured state). Also, some "hazardous articles" (e.g., dry friction materials) are required
to be reported via both processes.

Copyright Ford Motor Company

Printed copies are uncontrolled
Provided by IHS under license with FORD Copyright © 2006, Ford Global Technologies,
Licensee=Johnson LLC
Controls/5912197100 Page 7 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

4.7 CERTIFICATION

4.7.1 Hard Parts Certification

For parts that are required to be reported in IMDS according to section 4.1, the Ford
Certification page must be completed in IMDS by December 31, 2006. It is the
suppliers responsibility to assure that the person certifying, is of the appropriate authority
for the supplying company.

By certifying in IMDS, suppliers are giving an assurance that their parts are in compliance
with the substance prohibitions in this version of the Ford Restricted Substance
Management Standard (WSS-M99P9999-A1).

To be able to perform the Ford Motor Company Certification in IMDS, the appropriate user
must have a "Certifier" profile set up in their IMDS account. This profile is assigned by the
suppliers "IMDS Client Manager.

4.7.2 Non-dimensional Materials Certification

All non-dimensional production material suppliers must certify compliance to RSMS in

GMAP-e1291 no later than December 31, 2006. Certifiers must have access to the
Covisint website. By certifying RSMS in GMAP-e1291, the supplier is taking the
responsibility that their materials comply with the requirements in the latest issue of the
RSMS.

If suppliers have both non-dimensional materials and dimensional materials (parts), the
suppliers must certify in both the IMDS and GMAP-e1291 sites.

Suppliers that have not migrated to the "Ford Supplier Portal" should do so
immediately, using https://portal.covisint.com. Once in the "logon screen" click on
"membership" then click "help" and complete enrollment form for registration.

5. GENERAL INFORMATION

5.1 Definitions for technical terms are provided in Appendix 1.

5.2 Additional information may be obtained through the activities shown in Appendix 2.

5.3 Matrix to clarify the appropriate reporting mechanism for suppliers concerning material and
substance content reporting is provided in Appendix 3.

5.4 Please note that any PII (Personally Identifiable Information) that you provide in IMDS and the GMIR
Supplier Portal to Ford Motor Company (which includes Jaguar Cars, Aston Martin Lagonda, Volvo
Car Corporation, Land Rover and Mazda Motor Corporation), will be stored and processed in Ford of
North America (Dearborn, Michigan).
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 8 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS
GADSL

Classification
(to be
Row Effective
Substance (a) reported Threshold (b) Applications Affected
Number Date
in IMDS)

1 Acetaldehyde D Yes 0.1% All Products Immediate

2 Acetamide D Yes 0.1% All Products Immediate
3 Acrylamide D Yes 0.1% All Products Immediate
4 Acrylonitrile D Yes 0.1% All Products Immediate
5 Aniline and its salts D Yes 0.1% All Products Immediate
6 Antimonytrioxide (Diantimonytrioxide) D Yes 0.1% All Products Immediate
7 Aromatic amines or their salts:
7.1 4-Aminobiphenyl or its salts P Yes 0.01% All Products Immediate
7.2 Benzidine or its salts P Yes 0.01% All Products Immediate
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

7.3 2-Naphthylamine or its salts P Yes 0.01% All Products Immediate

7.4 4-Nitrobiphenyl or its salts P Yes 0.01% All Products Immediate
0.01% (unless
present in
metals & alloys,
8 Arsenic or its compounds D Yes All Products Immediate
then the
declaration limit
is 0.05%).
Yes (as
Organoarsenic compounds
8.1 P Arsenic 0.01% All Products Immediate
compound)
9 Asbestos P Yes Not Detectable All Products Immediate
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content if
substances exceed listed the threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 9 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

0.003%
(30ppm) in
textiles
Amines,carcinogenic, which are formed from (virgin) or
10 P Yes Textiles and leather Immediate
Azo-dyes leather;
0.007% in
recycled
fibers (c)
11 Barium compounds (organic or water soluble) D Yes 1.0% All Products Immediate
12 Benzene D Yes 0.01% All Products Immediate
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

All vehicle related

12.1 P Yes 0.1% Immediate
parts(except fuel)
13 Beryllium or its compounds D Yes 0.1% All Products Immediate
Biocidal coatings/biocidal additives (also see
14 Triorganotin compounds (trialkyl- and triaryltin D Yes 0.1% All Products Immediate
compounds)
Brominated flame retardants
D
Note: Separate Table 1 entries / classifications
exist for the following members of this group:
15 (see Yes (d) 0.1% All Products Immediate
Polybrominated biphenyls [PBB]
separate
Polybrominated diphenyl ethers [PBDE],
entries)
Tris(2,3-dibromopropyl)phosphate [TRIS]

15.1 Hexabromocyclododecane (HBCD) D Yes 0.1% All Products Immediate

a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
th
c) The threshold applies to cleaved amine content in materials. For recycled fibers, until 1 January 2005, the allowable threshold is 0.007%. EU Directive 76/769/EEC, 19 Amendment provides further
technical guidance on which azodyes are affected.
d) PBB, PBDE's and TRIS are GADSL listed --`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 10 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

Tetrabromobisphenol A (TBBPA)
15.2 D Yes 0.1% All Products Immediate
16 Butadiene (1,3 - Butadiene ) D Yes 0.1% All Products Immediate
17 Butylphenol, 2,4,6-tri-tert D Yes 0.1% All Products Immediate
All applications except those
18 Cadmium or its compounds P Yes 0.01% Immediate
listed below
Prohibited
18.1 P Yes 0.01% Thick Film pastes after
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

30-Jun-06
Batteries for electric vehicles;
except NiCd batteries used as Prohibited
18.2 P Yes 0.01% replacement parts for vehicles after
put on the market before 31-Dec-08
31 Dec 2008
NiCd batteries used as
replacement parts for vehicles
put on the market before
18.3 D Yes 0.01% 31 Dec 2008. Note: Also, Immediate
applications with future
effective dates for prohibitions
are declarable.
Optical components in glass Prohibited
18.4 P Yes 0.01% matrixes used for Driver after
Assistance Systems 30-Jun-07
19 Carbon disulfide D No 0.1% All Products Immediate
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 11 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

20 Carcinogenic Substances D No 0.1% All Products Immediate

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

21 Chlorinated hydrocarbons:
21.1 Carbon tetrachloride (Tetrachloromethane) P Yes 0.1% All Products Immediate
21.2 1,1,2,2-Tetrachloroethane D Yes 0.1% All Products Immediate
21.3 1,1,1,2 Tetrachloroethane D Yes 0.1% All Products Immediate
21.4 Pentachloroethane D Yes 0.1% All Products Immediate
21.5 Trichloromethane (Chloroform) D Yes 0.1% All Products Immediate
21.6 1,1,2 Trichloroethane D Yes 0.1% All Products Immediate
21.7 1,1 Dichloroethylene (Vinylidene chloride) D Yes 0.1% All Products Immediate
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

21.8 1,1,1 Trichloroethane (Methyl chloroform) P Yes 0.1% All Products Immediate
21.9 Dichloromethane (Methylene chloride) D Yes 0.1% All Products Immediate
21.10 Trichloroethylene (Trichloroethene) D Yes 0.1% All Products Immediate
21.11 Tetrachloroethylene (Perchloroethylene) D Yes 0.1% All Products Immediate
Content
22 Chlorinated or brominated Dioxins or Furans P Yes All Products Immediate
above 10 ppb
23 Chloroaniline D Yes 0.1% All Products Immediate
Chloroepoxypropane
24 D Yes 0.1 All Products Immediate
(1-Chloro-2,3-epoxy-propane)
All Products--except that
25 Chlorofluorocarbons (CFC's) P Yes 0.1% Immediate
below:
CFCs used to service existing
25.1 D No 0.1% equipment where legally Immediate
permitted
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 12 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

26 Chloroparaffins
Short Chain Chloroparaffins, unbranched –
26.1 P Yes 0.1% All Products Immediate
(C10 to C13)
Medium Chain Chloroparaffins, unbranched –
26.2 D Yes 0.1% All Products Immediate
(C14 to C17
Long Chain Chloroparaffins, unbranched –
26.3 D No 0.1% Non-dimensional Products Immediate
(C18 to C28)
27 Chromium(VI)-salts (Cr+6; Hexavalent) P Yes 0.1% (c) All Products Immediate
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Cobalt compounds and alloys,

28 Cobalt or its compounds D Yes 0.1% Immediate
excluding cobalt in steels
29 Colophony (Rosin) D Yes 0.1% All Products Immediate
30 Copper, metallic D Yes 0.1% All Products Immediate
31 Cyclododecane, hexabromo (HBCD) D Yes 0.1% All Products Immediate

32 Cyclohexane, hexachloro D Yes 0.1% All Products Immediate

Diamino-diphenyl-methane
33 P Yes 0.1% All Products Immediate
(4,4`-Diaminodi-phenylmethane)
Dichloropropanol
34 D Yes 0.1% All Products Immediate
(1,3-Dichloro-2-propanol)
Diorganotin compounds (e.g. dialkyltin
35 D Yes 0.1% All Products Immediate
compounds)
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) A maximum value of 0.1% by weight, of Hexavalent Chromium, per homogenous material will be tolerated, (this percentage is based on the weight of the coating containing the Hexavalent
Chromium, not the part weight).
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 13 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

36 Ecotoxic Substances D No 0.1% All Products Immediate

37 Ethanol, 2,2',2''-nitrilotris (Triethanolamine) D Yes 0.1% Engine coolants Immediate
38 Ethyl/Methyl-Glycols or their Acetates
38.1 2-Methoxyethanol D Yes 0.1% All Products Immediate
38.2 2-Methoxyethyl acetate D Yes 0.1% All Products Immediate
38.3 2-Ethoxyethanol D Yes 0.1% All Products Immediate
38.4 2-Ethoxyethyl acetate D Yes 0.1% All Products Immediate
0.001% (10 Interior trim (by weight of
39 Formaldehyde (Free) D Yes Immediate
mg/kg) finished parts)
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

40 Halons P Yes 0.1% All Products Immediate

Interior trim (by weight of
41 Hexamines D Yes 0.2% Immediate
finished parts)
42 Hydrazine D Yes 0.1% All Products Immediate
43 n-Hexane D No 0.1% All Products Immediate
44 Hydrobromofluorocarbons (HBFC's) P Yes NA (c) All Products Immediate
Solvents, blowing agents and
all vehicle applications,
except for servicing vehicles
45 Hydrochlorofluorocarbons (HCFC's) P Yes NA (c) Immediate
produced prior to December
2001 (where legally
permitted)
All other products containing
45.1 D No NA (c) or manufactured using Immediate
HCFCs
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) NA = Not Applicable

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 14 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

All vehicle-related
46 Hydrofluorocarbons (HFC's) P Yes NA (c) applications except for Immediate
refrigerants
46.1 D Yes NA (c) All vehicle-related refrigerants Immediate
46.2 D No NA (c) Non-vehicle related products Immediate
47 Hydrogen Sulphide D No 0.1% All Products Immediate
All products except vehicle
48 Lead or its compounds P Yes 0.1% and facility applications Immediate
separately listed below:
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Steel, for machining purposes

48.1 P Yes 0.35% Immediate
and galvanized steel
Aluminum, for machining
48.2 P Yes 1.5% Immediate
purposes
Prohibited
Aluminum, for machining
48.3 P Yes 0.4% after
purposes
30-Jun-08
Prohibited
48.4 P Yes 0.1% Bearing shells and bushes after
30-Jun-08
48.5 P Yes 4.0% Copper alloys Immediate
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining in
cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits specified
by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) NA = Not Applicable

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 15 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

Electrical components which

contain lead in a glass or
48.6 D Yes 0.1% ceramic matrix compound, Immediate
except glass in bulbs and
glaze of spark plugs (c)
Prohibited
Wheel balance weights for as of
48.7 P Yes 0.1%
vehicles in North America, '07 MY
Job #1
Wheel balance weights in
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

regions other than those

48.8 D Yes 0.1% following the EU ELV Immediate
Directive, Japan and North
America
Vulcanizing agents/stabilizers
for elastomers in fluid
48.9 P Yes 0.5% Immediate
handling and powertrain
applications
Vulcanizing agents/stabilizers
Prohibited
for elastomers in fluid
48.10 P Yes 0.1% after
handling and powertrain
30-Jun-06
applications
Bonding agents for
48.11 P Yes 0.5% elastomers in powertrain Immediate
applications
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Components must be identified for dismantling, if the average per vehicle lead content exceeds 60 grams for electronic circuit boards, electrical components that contain lead in a glass or ceramic
matrix compound (except bulbs and spark plugs) and all other electric applications.
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 16 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Number reported (b) Date

in IMDS)

Prohibited
Carbon brushes in electric
as of
48.12 P Yes 0.1% motors for vehicles in North
'07 MY
America
Job #1
Carbon brushes in electric
motors in regions other than
48.13 D Yes 0.1% those following the EU ELV Immediate
Directive, Japan and North
America
Copper in friction materials of
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

brake linings for vehicles in

48.14 P Yes 0.4% regions following the EU ELV Immediate
Directive, Japan and North
America
Copper in friction materials of
brake linings in North America Prohibited
48.15 P Yes 0.1% and regions following the EU after
ELV Directive, Japan and 30-Jun-07
North America
Copper in friction materials of
brake linings in regions
48.16 D Yes 0.1% Immediate
following the EU ELV Directive,
Japan and North America
Valve seats for engine types
48.17 P Yes 0.1% Immediate
developed after 30 June 2003
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 17 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

Prohibited
Valve seats for engine types
48.18 P Yes 0.1% after
developed before 1 Jul 2003
30-Jun-07
Pyrotechnic initiators for
Prohibited
vehicles type approved in
if type
regions following the EU ELV
48.19 P Yes 0.1% approved
Directive & Japan after 30
after
June 2006 and replacement
30-Jun-06
initiators for these vehicles.
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

All Products (e), including

vehicle batteries; vibration
dampers mounted to body or
chassis (d); counter weights
48.20 D Yes 0.1% Immediate
for facility based equipment;
solder in electronic circuit
boards and other electric
applications (c)
a) All substances listed in Table 1 must be immediately reported if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Components must be identified for dismantling, if the average per vehicle lead content exceeds 60 grams for electronic circuit boards, electrical components that contain lead in a glass or ceramic
matrix compound (except bulbs and spark plugs) and all other electric applications.
d) The lead exemption for vibration dampers is meant as a temporary design fix for vibration issues encountered late in new program development. These dampers are expected to be designed out as
soon as practical.
e) Also applications with future effective dates for prohibitions are declarable.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 18 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

All applications except those

49 Mercury or its compounds (c) P Yes 0.1% Immediate
listed below
Prohibited
for
scalability
High Intensity Discharge UP3-UP6
49.1 P Yes 0.1%
Lamps program
launches
after
30 Jun 06
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

High Intensity Discharge

49.2 D Yes 0.1% Lamps and Flat Panel Immediate
Displays
50 Methanol D Yes 0.1% All Products Immediate
51 Methylacrylamidomethoxy-acetate D Yes 0.1% All Products Immediate
52 Methyl bromide (See Halons)
Mineral fibers (Natural or Synthetic) except
53 D Yes 0.1% All Products Immediate
Continuous Filament Fibers
53.1 Ceramic fibers D Yes 0.1% All Products Immediate
54 Monomethyldibromodiphenylmethane D Yes 0.1% All Products Immediate
55 Monomethyldichlorodiphenylmethane D Yes 0.1% All Products Immediate
56 Monomethyltetrachlorodiphenylmethane D Yes 0.1% All Products Immediate
57 Mutagenic substances D No 0.1% All Products Immediate
58 N,N-Dimethylformamide D Yes 0.1% All Products Immediate
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Vehicles containing Mercury components must offer mercury-free vehicle derivatives by 1 July 2007.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 19 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

59 N,N'-ditolyl-p-phenylenediamine D Yes 0.1% All Products Immediate

60 N,N'-dixylyl-p-phenylenediamine D Yes 0.1% All Products Immediate

All products, except stainless

61 Nickel or its compounds D Yes 0.1% steels and alloys containing Immediate
metallic nickel

Component surfaces likely to

0.5 be routinely touched, e.g.,
µg/cm2/week handles and buckles (release
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

61.1 D Yes (Ni release rate as determined by test Immediate

rate method BSEN1811:1999) (c).
threshold) Phosphated surfaces are
exempted

Additives in engine coolants,

vulcanizing agents in rubber
62 Nitrites D Yes 0.1% Immediate
products, anticorrosion
surface additive.

a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Test Method BSEN1811 can be accessed at http://www.cenorm.be/

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 20 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1
TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

63 N-Nitrosoamines/N-Nitrosoamides P Yes 0.1% (c) All Products Immediate

Metalworking fluids containing

mixtures of nitrites and
Not
63.1 P No amines/ amides that may form Immediate
Detectable
N-Nitrosoamines/ N-
Nitrosoamides
Detergent, cleaner and metal
64 Nonylphenols P No 0.1% Immediate
working products
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Detergent, cleaner and metal

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

64.1 Octylphenol D No 0.1% Immediate

working products
Detergent, cleaner and metal
working products; except
those in the North American
Nonylphenol ethoxylates (NA) region, approved by
65 P Yes (d) 0.1% Immediate
Ford Toxicology prior to 31
January 2001 for internal
use in non-dimensional
products in NA.
Detergent, cleaner and metal
65.1 Octylphenolethoxylate D No 0.1% Immediate
working products
66 N-toly-N'-xylyl-p-phenylenediamine D Yes 0.1% All Products Immediate
a) All substances listed in Table 1 must be immediately declared (via IMDS) if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibitions.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Residual N-Nitrosoamines/N-Nitrosoamides in cured polymeric articles need not be reported, nor will be subject to, the Prohibition at less than or equal to the stated threshold of 0.1 %, which is
considered to reflect the aggregate mass percent of all carcinogenic N-Nitrosoamines/N-Nitrosoamides present.
d) Only Nonylphenol ethoxylates on the GADSL are required to be reported in IMDS.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 21 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

Organotin compounds (see Diorganotins and

67
Triorganotins)
Ozone depleting substances (see definition in
68
Appendix 1)
0.0005% (5
69 Pentachlorophenol (PCP) or its salts P Yes All Products Immediate
ppm)
Perfluoroalkyl compounds, includes:
Perfluoroalkyl sulfonates (e.g. PFOS),
70 D Yes 0.1% All Products Immediate
fluorotelomers, and telomer-based polymeric
substances
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

71 Phenol D Yes 0.1% All Products Immediate

72 Phenylenediamines or its salts D Yes 0.1% All Products Immediate
73 Phthalates D Yes 0.1% All Products Immediate
See
Polycyclic aromatic hydrocarbons (PAH;
74 D Yes individual Vehicle-related parts Immediate
PCAH)
thresholds (c)
3% (total
PAH content
per Petroleum mineral oil
74.1 P Yes Immediate
basestock as basestocks in lubricants
quantified by
IP 346) (d)
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) See GADSL,Reference List, available as a downloadable file at http://www.gadsl.org and in the "News" section of IMDS at, http://www.mdsystem.de/html/en/home_en.htm.
d) Institute of Petroleum test method for PAH content can be found at http://www.energyinst.org.uk/

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 22 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

1mg/kg BaP 1 Jan

74.2 P Yes 10mg/kg total Tires for EU Markets 2010
of (d)
75 Polybrominated biphenyls (PBB) P Yes 0.001% All Products Immediate
76 Polybrominated diphenyl ethers (PBDE)
76.1 Decabromodiphenyloxide D Yes 0.1% All Products Immediate
76.2 Pentabromodiphenyloxide P Yes 0.1% All Products Immediate
76.3 Octabromodiphenyloxide P Yes 0.1% All Products Immediate
77 Polybrominated Terphenyls ( PBT ) D Yes 0.001% All Products Immediate
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

0.001% (10
78 Polychlorinated Biphenyls ( PCB ) P Yes All Products Immediate
ppm)
79 Polychlorinated Naphthalenes D Yes 0.1% All Products Immediate
80 Polychlorinated Terphenyls ( PCT ) P Yes 0.001% All Products Immediate
Refer to
Products of Endangered Species Not
81 P Section All Products Immediate
Detectable
3.1.8
Air Bags, Seat belt pre-
82 Pyrotechnical compounds D Yes 0.1% Immediate
tensioners, etc.
82.1 Ammonium Perchlorate D Yes 0.1% Pyrotechnical Compound Immediate
82.2 Nitrocellulose D Yes 0.1% Pyrotechnical Compound Immediate
82.3 Sodium Azide D Yes 0.1% Pyrotechnical Compound Immediate
No (see
Radioactive substances (including scrap
83 P section (c) All Products Immediate
metal contaminants)
3.1.11)
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Radioactivity should meet "Unconditional Use Clearance Level" requirements consistent with International Atomic Energy Agency (IAEA) and the Commission of European Communities (CEC)
standards for individual radionuclides IAEA-TECDOC-855 (1996) & Safety Series RS-G-1.7 (2004). (See 3.1.11). Radioactive sources used in manufacturing processes are exempted.
d) The PAH's to be reported are identified under PAH definition in Appendix 1.
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 23 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

84 Reproductive toxicants D No 0.1% All Products Immediate

85 Secondary Amines D Yes 0.1% All Products Immediate
86 Selenium and its compounds D Yes 0.1% All Products Immediate
87 Sensitizing substances D No 0.1% All Products Immediate
88 Styrene (Vinyl benzene ) D Yes 0.1% All Products Immediate
89 Styrene oxide (Epoxy styrene) D Yes 0.1% All Products Immediate
90 Sulfur Hexafluoride P Yes NA (c) Vehicle applications Immediate
Processing (casting) of
90.1 P No NA (c) Immediate
Magnesium
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Closed systems (a system

that is normally hermetically
90.2 D No NA (c) Immediate
closed), e.g., electrical
installations
91 Thallium or it's compounds D Yes 0.1% All Products Immediate
Thioperoxydicarbonic diamide
92 D Yes 0.1% All Products Immediate
([(H2N)C(S)]2S2), tetramethyl- ("Thiram")
93 Tris(2-chloroethyl)phosphate D Yes 0.1% All Products Immediate
94 Trichlorophenol or its salts D Yes 0.1% All Products Immediate
Trichloropropane
95 D Yes 0.1% All Products Immediate
(1,2,3 - Trichloropropane )
96 Trimethylphosphate D Yes 0.1% All Products Immediate
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.
c) Not Applicable

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 24 of 38
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

WSS-M99P9999-A1

TABLE 1
SUBSTANCE RESTRICTIONS

Classification
GADSL
Row (to be Threshold Effective
Substance (a) Applications Affected
Number reported (b) Date
in IMDS)

Vehicle related parts, e.g. Prohibited

Triorganotin compounds (trialkyl- and
97 P Yes 0.01% those with incorporated after
triaryltin compounds)
biocides 1-Jan-06
All products other than vehicle
97.1 D No 0.05% Immediate
related parts
98 Triphenylphosphate D Yes 0.1% All Products Immediate
99 Tris-(1-aziridinyl) phosphine oxide P Yes 0.1% All Products Immediate
100 Tris(2,3-dibromopropyl)phosphate [TRIS] P Yes 0.1% All Products Immediate
0.0005% (5
101 P Yes All Products Immediate
Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Vinyl chloride ppm as

monomer)
a) All substances listed in Table 1 must be immediately declared if their current percent content by weight, per homogeneous material exceeds the stated threshold for future prohibition.
b) Certain substances are subject to a specified upper threshold, stated as weight percent content in a material (see the definition of "Material" in Appendix 1). Suppliers must report content, if
substances exceed the listed threshold percentage, by weight per homogeneous material (See definition of Homogeneous Material in Appendix 1). Monomers, catalysts and accelerators remaining
in cured polymeric articles (including paints) as residual content need not be reported at less than 0.1% by weight per homogeneous material, unless subject to explicit threshold content limits
specified by this standard (e.g. vinyl chloride). Thresholds for heavy metals are to be calculated on the basis of the elemental form of the metal.

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 25 of 38
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1
DEFINITIONS

ACKNOWLEDGMENT:

Ford Motor Company will provide electronic acknowledgment(s) to the submitter:

1) verifying receipt of the suppliers' submission(s) to IMDS and GMAP-e1291 (where applicable)
2) compliance or non-compliance of the data therein to the WSS-M99P9999-A1,
3) and receipt of their certification of compliance with WSS-M99P9999-A1.

ARTICLE:

Under the definition provided by the US Occupational Safety and Health Administration (OSHA),
"Article" means a manufactured item other than a fluid or particle:

1) which is formed to a specific shape or design during manufacture,

2) which has end use function(s) dependent in whole or in part upon its shape or design during end
use, and
3) which under normal conditions of use does not release more than very small quantities, e.g.,
minute or trace amounts of a hazardous chemical (as determined under paragraph [d] of the code
of Federal Regulation of section 29CFR 1910.1200), and does not pose a physical hazard or
health risk.

BIOCIDES:

Additives intended to prevent or restrict microbiological growth.

CARCINOGENS:

Including:

1) any member of Group 1, 2A, or 2B, in the latest edition of Monographs of the International Agency
for Research on Cancer (IARC)
2) any "select carcinogen" listed by the United States Occupational Safety and Health Administration
(refer to 29 CFR Part 1910, Subpart Z, Toxic and Hazardous Substances)
3) any "known carcinogen" or substance "reasonably anticipated to be a carcinogen" by the United
States National Toxicology Program (NTP) in the latest edition of Annual Report on Carcinogens
4) any "A1", "A2" or "A3" carcinogen listed by the American Conference of Governmental Industrial
Hygienists (ACGIH) in the latest edition of Threshold Limit Values for Chemical Substances and
Physical Agents and Biological Exposure Indices.
5) any carcinogen listed by the Deutsche Forschungs Gemeinschaft (DFG) in the latest edition of
their Maximale Arbeitsplatz Konzentration (MAK) list in Categories 1-2 and 3-5 (as listed in the
Ford Restricted Substance List)
6) any chemical “known to” the State of California to cause cancer, pursuant to The Safe Drinking
Water and Toxic Enforcement Act of 1986 ("Proposition 65")
7) substances classified as Category 1 or 2 carcinogens under the provisions of the European EC
Directives on the Classification, Packaging and Labeling of Dangerous Substances and Dangerous
Preparations (EC Council Directive 67/548/EC3).

Printed copies are uncontrolled Copyright--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

© 2006, Ford Global Technologies, LLC Page 26 of 38

Copyright Ford Motor Company

Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1
DEFINITIONS

DECLARABLE:
Substances are designated "Declarable" (D) when present in a material, or part in a vehicle, and are
legally regulated, projected to be regulated or required to be tracked for information gathering purposes.

ECOTOXICANTS:

Substances posing recognized hazard to the environment, in general, or to specific ecosystems,

including: substances so classified, due to their ecotoxicity, under the provisions of the European EC
Directives on the Classification, Packaging and Labeling of Dangerous Substances and Dangerous
Preparations, and as classified by ASTM STP 1179, p.34, 1993.

ENDANGERED SPECIES (PRODUCTS OF):

Includes any substance or material that originates from an endangered species. Lists of endangered
species include:

1) Latest "International Union for Conservation of Nature and Natural Resources (IUCN) Red List of
Threatened Species; http://www.redlist.org/".
2) European Union (EU) Regulation 338/97 on the protection of species of wild fauna and flora by
regulating trade therein", and its amendments.
3) United States Endangered Species Act.
4) UNEP-WCMC Species Database http://sea.unep-wcmc.org/species/dbases/about.cfm.

All timber products must be sourced from forests that comply with one of the following requirements:
Certified under the "Forest Stewardship Council' or the "Programme for the Endorsement of Forest
Certification Schemes" or Declared as sourced from plantation or recycled timber orLicensed under the
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

FLEGT system (EU Action Plan for "Forest Law Enforcement, Governance and Trade)

EU ELV (End of Life Vehicle) Directive:

European Union Directive 2000/53/EC on ELV's

http://europa.eu.int/scadplus/leg/en/lvb/121225.htm

GPDS:

Global Product Development System - The process tasks and deliverables necessary to develop and
launch a vehicle. Team events and milestones are defined to communicate progress at various points
throughout the process.

GMAP – e1291 SYSTEM:

The GMAP-e1291 System is a single, web-based tool that is used by suppliers to submit non-
dimensional material compositions, associated regulatory data, hazardous materials/dangerous goods
transportation information, and applicable MSDSs (in the required languages, designated by the
requester of the product and indicated with an asterisk) to Ford Motor Company. The system is
currently in use in N. America, with other regions to follow. The GMAP-e1291 system also allows
suppliers to check the status of materials processed through the GMAP-e1291 System and update
materials information [https://web.emm.ford.com/e1291/menu/].

Copyright Ford Motor Company

Provided by IHS under license with FORD Printed copies are uncontrolled Licensee=Johnson
Copyright © 2006, Ford Controls/5912197100
Global Technologies, LLC Page 27 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1 (Cont'd)
DEFINITIONS

HAZARDOUS:

Hazardous substances/materials are those that have the capacity of producing injury or illness through
ingestion, inhalation, or absorption through any body surface, or creating an adverse effect upon the
environment.

HOMOGENOUS MATERIAL:

The physical definition of homogeneity is: the quality of having all properties independent of the position.
The compositional homogeneity of any material means: the chemical composition is the same for all
substances forming or being an ingredient of the material (e.g. impurities) at any spot of measurement.
The opposite: an inhomogenous material is composed in a way that the amount of the chemical
ingredients is dependent on the spot of measurement.

INTENTIONALLY INTRODUCED:

Deliberately utilized in the formulation of a material or component where its continued presence is desired
in the final product to provide a specific characteristic, appearance or quality. The use of recycled
materials as feedstock for the manufacture of new products, where some portion of the recycled materials
may contain RSMS-listed substances, are not to be considered as intentionally introduced.

GLOBAL AUTOMOTIVE DECLARABLE SUBSTANCE LIST (GADSL):

This is a common list of substances agreed by all of the automobile manufacturers that subscribe to
IMDS. The purpose of this list is to commonize the reporting requirements for all users of IMDS
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

(http://www.gadsl.org).

MACHINING:

Material formed and shaped by tool.

MATERIAL:

Within the text of this Standard means the primary medium that may contain a "substance", which is
restricted by this Standard, such as a friction material (e.g. clutch or brake pad) containing lead sulfide.
Acceptable material descriptions are Industry standards or Ford Motor Company
standards/specifications. Where these are not available to define the material, a Supplier's
standards/specification may be used.

MATERIAL, DIMENSIONAL:

Dimensional items are those having their own shape and are essentially solid. Most are considered
"articles" (See definition of "Article")

MATERIAL, NON-DIMENSIONAL:

Non-dimensional items are those that have no intrinsic shape without containing structure. Examples of
these items are fluids, gases, powders and semi-solids (pastes) like adhesives, greases and paint, bulk
chemicals, and separately packaged chemicals in post-production service kits.

Copyright Ford Motor Company

Printed copies are uncontrolled
Provided by IHS under license with FORD
No reproduction or networking permitted without license from IHS
Licensee=Johnson Controls/5912197100
Copyright © 2006, Ford Global
Not for Technologies,
Resale, LLC MDT
09/26/2006 09:57:46 Page 28 of 38
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1 (Cont'd)
DEFINITIONS

MATERIAL, NON-PRODUCTION:

Non-production materials are those materials used in Ford facilities which do not remain on products
marketed by Ford.

MATERIAL, POST-PRODUCTION:

Post-production materials are those materials used to service a vehicle after it exits the assembly plant.

MATERIAL, PRODUCTION:

Production materials are those materials used for the fabrication of production parts, complete vehicles,
or other materials that remain on products marketed by Ford.

MUTAGENS:

Any chemical that can produce a genetic mutation, i.e., an induction of DNA damage, or changes in
chromosome structure or number, including: substances classified as Category 1, 2 or 3 mutagens
under the provisions of the EC Directives on the Classification, Packaging and Labeling of Dangerous
Substances and Dangerous Preparations.

NEW PRODUCTION PARTS:

Newly drawn parts that are not in current production or carried over from another vehicle
Parts are not considered new parts if only the part number changes, in line with current practices (i.e.
the prefix changes to accommodate a model year change, or the suffix changes to accommodate a
minor engineering change of a current part)

OZONE DEPLETING SUBSTANCES (ODS):

Ozone Depleting Substances (ODS) - are defined as chemicals that have been linked to the depletion of the
stratospheric ozone layer, and restricted under the 1987 Montreal Protocol, listed by U.S. Environmental
Protection Agency regulations under 40 Code of Federal Regulations, Part 82, Appendix F to Subpart A,
and addressed by the European Union Directive-2037/2000/EC, chemicals are collectively identified as
ozone depleting substances (ODSs) and include CFCs (chlorofluorocarbons), HCFCs
(hydrochlorofluorocarbons) and several brominated-carbons including Halons. The following RSMS
Chemical Groupings and Categories should identify all ODSs (from Table 1):

(21.1) Chlorinated hydrocarbons (carbon tetrachloride)

(21.8) Chlorinated hydrocarbons (methyl chloroform)
(25) Chlorofluorocarbons (CFC's)
(40) Halons
(44) Hydrobromofluorocarbons (HBFC's)
(45 & 45.1) Hydrochlorofluorocarbons (HCFC's)

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Copyright Ford Motor Company

Printed copies are uncontrolled
Provided by IHS under license with FORD
No reproduction or networking permitted without license from IHS
Licensee=Johnson
Copyright © 2006, Ford Controls/5912197100
Global Technologies, LLC
Not for Resale, 09/26/2006 09:57:46 MDT
Page 29 of 38
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1 (Cont'd)
DEFINITIONS

PAH (Polycyclic-aromatic hydrocarbons):

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
Regulations prohibiting the use of PAH extender oils in tires (Directive 2005/69/EC, for EU markets)
from January 1, 2010 require the sum of the following 8 PAH's NOT to exceed 10mg/kg:
Benzo(a)pyrene CAS # 50-32-8
Benzo(e)Pyrene CAS # 192-97-2
Benzo(ah)anthracene CAS # 56-55-3
Chrysene CAS # 218-01-9
Benzo(b)fluoranthene CAS # 205-99-2
Benzo(j)fluoranthene CAS # 205-82-3
Benzo(k)fluoranthene CAS # 207-08-9
Dibenzo(ah)anthracene CAS # 53-70-3

These limits are regarded as kept, if the PAH extract is <3% by mass, as measured by the Institute of
Petroleum standard IP346.

PERCENT (%) BY WEIGHT:

Unless otherwise stated, the ratio of the masses of the individual substance and material (see definition
of “Material” above) containing the substance multiplied by 100.

Mass Substance
---------------------- X 100 = Percent Weight
Mass Material

POLYMERIC:

Non-metallic materials, including plastics, elastomers, wood and cardboard. This includes:
• All injection molded, blow molded and heat-pressed thermoplastic parts (PP, ABS, PA, PVC etc.)
• All molded thermoset parts (UP, PUR)
• All foamed plastic parts (PUR, EPP, EPS, etc.)
• Natural and synthetic rubbers (NR, EPDM, etc.)
• Synthetic fibers (Polyester, Polyamid) such as in carpets, package trays, seat covers, seat belts

PRODUCT(S):

Is the entity that is supplied to Ford, which can be an assembly, part (component), sub-component,
material, or substance. This could include the restricted substance itself (e.g. lead sulfide), a material
containing the restricted substance (e.g. a friction material containing lead sulfide), or a component or
assembly containing the restricted substance (e.g. a brake assembly with a lead-containing friction
material).

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 30 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1 (Cont'd)
DEFINITIONS

PROHIBITED:

Substances designated, as "Prohibited" (P) shall not be supplied in any products, subject to the stated
directions on content threshold and affected applications. A maximum concentration value of 0.1% by
weight of per homogeneous material shall be tolerated for these substances, or subject to specific
threshold limits specified by this Standard. All RSMS listed substances which are intentionally added,
must be reported in IMDS. For the purpose of this standard monomers, catalysts, and accelerators
remaining in cured polymeric articles (including paints) as residual content are not considered
"intentionally introduced". If Prohibited substances conflicting with the above definition are identified in
products supplied to Ford Motor Company, they must be reported (see Reporting Matrix – Appendix 3)
and suppliers must institute immediate corrective measures. See special requirements for Post
Consumer Recyclate (PCR) materials.

RECYCLED CONTENT:
The portion of a material's or product's weight that is composed of materials that have been recovered
from or otherwise diverted from the scrap stream, either from the manufacturing process (PIR) or after
consumer use (PCR). Recycled content consists of PIR and PCR, but not home scrap.

• Post-Industrial Recyclates (PIR): Scrap which is a by-product of the manufacturing process

(excluding home scrap) and is re-used in the manufacture of the part.
• Home Scrap: Material commonly reused by the industry within the original manufacturing process.
Examples include materials which are regranulated and re-fed within a facility. Home scrap is not
considered recycled content.
• Post-Consumer Recyclates (PCR): Scrap generated by consumers which has been re-used in the
manufacturing of a new part. Examples are used pop bottles which are reused to make grill
opening panels, or used bumpers which are re-made into a new bumpers.

Reporting of recycled content:

• Only the weight of the recyclate within the component or assembly should be reported. Do not
report the component or assembly weight as recycled content. This weight is reported and totaled
separately.
• For PCR only, suppliers do not have to report "Declarable" substances unless otherwise specified,
although suppliers must report any substances that are listed in this Standard as "Prohibited" or
"Prohibited above threshold".

REPORTING PERIOD:

The period of time between each annual release of the Restricted Substance Management Standard
(RSMS), WSS-M99P9999-A1

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled

Copyright Ford Motor Company
Provided by IHS under license with FORD Copyright © 2006, Ford Global Technologies,
Licensee=Johnson LLC
Controls/5912197100 Page 31 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 1 (Cont'd)
DEFINITIONS

REPRODUCTIVE TOXICANTS:

Substances or other agents which may affect male or female fertility, cause damage to the unborn or
newborn child, or provoke miscarriage, including:

1) Any chemical known to the State of California to cause reproductive harm or birth defects,
pursuant to The Safe Drinking Water and Toxic Enforcement Act of 1986 ("Proposition 65").
2) Substances classified as Category 1, 2 or 3 due to adverse effects on fertility, or their
developmental toxicity under the provisions of the EC Directives on the Classification, Packaging
and Labeling of Dangerous Substances and Dangerous Preparations.

SENSITIZERS:

Substances which have been identified as confirmed or potential sensitizers by animal experimentation or
human experience include but are not limited to chemicals which:

1) Cause a "substantial proportion of exposed people or animals to develop an allergic reaction in

normal tissue after repeated exposure to the chemical" (refer to Occupational Safety and Health
Administration Standard, 29 CFR 1910.1200).

2) Cause on "normal living tissue through an allergic or photodynamic process a hypersensitivity

which becomes evident on reapplication of the same substance" (refer to Federal Hazardous
Substances Act 16 CFR 1500.3(b)(9).
3) Are classified as inhalation or contact sensitizers under the provisions of the EC Directives on the
Classification, Packaging and Labeling of Dangerous Substances and Dangerous Preparations
4) Are classified as such according to the World Health Organization “criteria for classification of skin
and airway sensitizing substances in the work and general environments" (1996).

SERVICE KITS

Service Kits are post-production service parts/materials necessary for vehicle maintenance or repair that
are packaged for customer convenience.

SERVICE UNIQUE PARTS:

1) Those parts sold and released by FCSD, and usually, not common with production, (i.e.,
remanufactured components service chemicals, etc.).
2) Those parts sold by FCSD and released by FCSD/PD, and common with production, although the
end item part number isn't supplied for production (i.e., service kits containing component
production parts to service production assemblies, filters, etc.).

SUBSTANCE:

The basic chemical or chemical compound listed in this Standard, e.g., lead or lead sulfide.

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Copyright Ford Motor Company

Printed copies are uncontrolled

Provided by IHS under license with FORD
No reproduction or networking permitted without license from IHS Copyright © 2006, Ford Global
Not for
Licensee=Johnson Controls/5912197100
Technologies,
Resale, LLC MDT
09/26/2006 09:57:46 Page 32 of 38
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 2
FORD INFORMATION CONTACTS

TOXICOLOGY/OCCUPATIONAL HYGIENE

Ford European Toxicology Group Ford North American Toxicology Group

GB-1/161 Ford Motor Company
Ford Motor Company Ltd. Central Laboratory
Central Office, Eagle Way 15000 Century Drive
Warley, Essex CM133BW Dearborn, MI 48120
England U.S.A.
Telephone: 44-(0) 1277-251901 Telephone: 1-(313) 845-4588
Fax: 44-(0) 1277-251899 Fax: 1-(313) 390-4237

Safety Department
Ford Motor Company of Australia Ltd. Environmental Department 91710 PVÖS 21
Cnr. Princes Highway and North Vehicle Engineering
Shore Road Volvo Car Corporation
Norlane, Victoria SE-405 31 Göteborg
Australia Sweden
Telephone: 61-(52) 795 130 Telephone: 46-31-3258771
Fax: 61-(52) 795 125 Email: jlundst2@volvocars.com

Hazardous Materials and Toxicology

Ford Motor Company for South America
Sao Paulo, Brazil
Telephone: 55-11-4174-8229 or 8193
Fax: 55-11-4174-9872

Material Handling Safety and Compliance Office

Ford Asia Pacific
Ford Lio Ho Motor Co., Ltd.
705 Chung Hwa Rd. Sec. 1
Chung Li, Taoyuan, 320
Taiwan, R.O.C.
Telephone: 886-3-4530829
Fax: 886-3-4635004

ENVIRONMENTAL

Environmental Quality Office, Europe Environmental Quality Office

Ford Motor Company Ford Motor Company
D-NG/E-701 3 Parklane Blvd., Suite 950
Henry Ford Strasse 1 Parklane Towers West
Germany Dearborn, MI 48126
Telephone: 49-(0)221-9017172 USA
Fax: 49-(0)221-9012919 Telephone: 1-(313) 322-1226
Fax: 1-(313) 248-5030

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled

Copyright Ford Motor Company
Provided by IHS under license with FORD
Copyright © 2006, Ford Global Technologies, LLC
Licensee=Johnson Controls/5912197100
Page 33 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 2
FORD INFORMATION CONTACTS

Environmental Department, 91710, PVÖS 21 Environmental Quality Office

Vehicle Engineering Ford of Mexico
Volvo Car Corporation Mexico General Office Building
SE-405 31 Göteborg 8300
Sweden Paseo de Reforma No. 333
Telephone: 46-31-3258771 Mexico City, D.F.
Email: jlundst2@volvocars.com Mexico 5
Telephone: 52-5-3266252
Fax: 52-5-3266383

Environmental Quality Office Asia Pacific Environmental Quality Office, Latin America
Ford Motor Company of Australia Limited Head Office Ford Motor Company SA de CV
1735 Sydney Road Guillermo Gonzalez Camarena No. 1500
Campbellfield Victoria 3061 Mexico City, D.F. 01210 Mexico
Australia Telephone: 52-55-11033825
Telephone: 61-39359 7914 Telephone: 52-55-11033857
Fax: 61-39359 8949

MATERIALS ENGINEERING

Materials Engineering and Testing Global Materials & Fastener

Materials Technology Centre GB-15/GM Standards
Ford Motor Company Ltd. Ford Motor Company
Research & Engineering Center 20901 Oakwood Boulevard
Laindon, Basildon PDC, MD 128
Essex SS15 6EE Dearborn, MI 48124
U.K. U.S.A.
Telephone: 44-(0) 1268-40-3377 Telephone: 1-(313) 805-4887
Email: aharris6@ford.com Fax: 1-(313) 317-7880

Materials Engineering
Products Engineering Office
Ford Motor Co. of Australia Ltd.
1727 Sydney Road, Broadmeadows
Victoria 3061
Australia
Telephone: 61-(3) 93-597-264 --`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 34 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 2
FORD INFORMATION CONTACTS

Materials Engineering Materials Engineering

Jaguar Cars & Land Rover Ford South America Operations
Jaguar Engineering Centre Product Development
W/1/040 Complexo Industrial Ford Nordeste – PD Bldg
Coventry CV3 4LF Camacari -Bahia, Brazil
U.K. Telephone: 55-71-649-3593
Telephone: 44 (0) 2476 206629 Fax: 55-71-649-3493
Email: mgriff52@landrover.com

RECYCLING PLANNING

Emissions Control & Recycling Planning Vehicle Recycling

Ford Motor Company Ford-Werke GmbH
World Headquarters E479/W03
One American Road D-50725 Köln (Niehl)
Dearborn, MI 48126 Germany
U. S. A. Telephone: 49-(0)221-9016202
Telephone: 1-(313) 390-0504 Fax: 49-(0)221-9013458
Email: cdurance@ford.com

FOR INTERNATIONAL MATERIAL DATA SYSTEM (IMDS) INFORMATION:

Materials Engineering &Testing, Body Engineering Information Technology

Ford-Werke GmbH, Henry-Ford Strasse 1 Product Development Center, D-MD/035
D-50725 Köln (Niehl) Ford-Werke GmbH, Spessart Strasse
Germany D-50725 Köln (Merkenich)
Telephone: 49-(0)221-9012956 Germany
Email: msauerbi@ford.com; cvoss@ford.com Telephone: 49-221-9037083
Email: pnoethen@ford.com

Environmental Department, 91710, PVÖS 21 Materials Engineering

Volvo Car Corporation Jaguar Cars & Land Rover
SE-405 31 Göteborg Jaguar Engineering Centre
Sweden W/1/040
Telephone: 46-31-3258771 Coventry CV3 4LF
Email: jlundst2@volvocars.com U.K.
Telephone: 44 (0) 2476 206629
Email: mgriff52@landrover.com

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled

Copyright Ford Motor Company
Provided by IHS under license with FORD Copyright © 2006, Ford Global Technologies,
Licensee=Johnson LLC
Controls/5912197100 Page 35 of 38
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
 ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 2
FORD INFORMATION CONTACTS

FOR INTERNATIONAL MATERIAL DATA SYSTEM (IMDS) INFORMATION: (cont)

MATERIALS ENGINEERING & TESTING, BODY ENGINEERING Materials Engineering

Product Development Center, D-ME/2J2 Ford South America Operations
Ford-Werke GmbH, Spessart Strasse Product Development
D-50725 Köln, (Merkenich) Complexo Industrial Ford Nordeste-PD Bldg.,
Germany Camaçari - Bahia - Brazil
Telephone: 49-(0)221-9037024 Telephone: 55-71-649-3413
Email: ebauer@ford.com Fax: 55-71-649-3493

Other regions should contact these numbers:

Global Materials & Fastener

Standards
Ford Motor Company
20901 Oakwood Boulevard
PDC, MD 128
Dearborn, MI 48124
U.S.A.
Telephone: 1-(313) 805-4887 or 1-(313) 805-4888
Fax: 1-(313) 317-7880

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 36 of 38
Copyright Ford Motor Company
Provided by IHS under license with FORD Licensee=Johnson Controls/5912197100
No reproduction or networking permitted without license from IHS Not for Resale, 09/26/2006 09:57:46 MDT
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

ENGINEERING MATERIAL SPECIFICATION

WSS-M99P9999-A1

APPENDIX 3 – REPORTING MATRIX

The purpose of the Reporting Matrix is to clarify the appropriate reporting mechanism for suppliers concerning material and substance content in
products supplied to Ford Motor Company. Please refer to the "Definitions" (Appendix 1) for explanation of the material categories listed in the
Reporting Matrix. The material examples listed are for illustrative purposes only and do not represent a complete listing. The acronym, "IMDS"
indicates reporting via the International Material Data System, which was previously discussed in Section 4 of this Standard. The acronym, "GMAP-
e1291" indicates reporting via the Ford Approval Process, which involves submission of complete supplier material information including Material
Safety Data Sheet (MSDS,) physical-chemical data, and material certifications through the GMAP-e1291 system (where applicable). Products
receiving Ford approval will be issued a Ford Toxicology/Ford Internal Reference (FIR) Number. For further details regarding the Ford Approval
Process and affected materials, please contact the appropriate regional Ford Toxicology (TOX) or Environmental Quality Office (EQO) listed in
Appendix 2. Suppliers should contact a Volvo or Land Rover representative (Appendix 2) for guidance relating to the appropriate reporting
mechanism for material and substance content in products supplied to these Brands. Non-dimensional materials (chemical products)
contained on or in vehicle parts in a manner that is known or reasonably anticipated to pose a health or environmental hazard during normal
handling, use, service or disposal are subject to separate detailed evaluation and clearance by Ford Toxicology and the Environmental Quality Office
(see Section 3.0), in addition to IMDS reporting requirements.

Production Material Non-Production Material Post-Production Material

Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Dimensional Material
IMDS: Report all "hard parts" IMDS: Not applicable IMDS: Report all "Hard" Service (aftermarket) parts.
remaining on the vehicle at point of
sale. Cured paints and adhesives are Use Attachment 1: Facility
dimensional materials and must be equipment, "hard" parts, assembly
included in the assembly data. aides

GMAP-e1291 : In addition to IMDS GMAP-e1291 : Welding rods/ wires, GMAP-e1291 : In addition to IMDS reporting
reporting requirements, welding rods/ and solder used within Ford facilities for requirements, dry friction materials (i.e. Brake pads,
wires, dry friction materials non-production applications manual trans. clutch pads)
Non-dimensional Material
IMDS: Non-dimensional materials that IMDS: Not Applicable IMDS: Non-dimensional materials that are contained
are contained in hard parts must also in hard parts must also be included in the IMDS data.
be included in the IMDS data. For For these materials please include the appropriate
these materials please include the Ford Material Specification, Tox/FIR Numbers and
appropriate Ford Material GADSL-listed substances.
Specification, Tox/FIR Numbers and
GADSL-listed substances.

GMAP-e1291: In addition to any GMAP-e1291: All fluids, gases, GMAP-e1291: In addition to any IMDS reporting
IMDS reporting requirements, all pastes, powders, uncured paints/ requirements, all fluids, gases, pastes, powders,
fluids, gases, pastes, powders, sealants/ adhesives uncured paints/ sealants/ adhesives
uncured paints/ sealants/ adhesives

Printed copies are uncontrolled Copyright © 2006, Ford Global Technologies, LLC Page 37 of 38
--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---
No reproduction or networking permitted without license from IHS
Provided by IHS under license with FORD
Copyright Ford Motor Company

SUPPLIER RESTRICTED SUBSTANCE INFORMATION REPORTING FORM FOR (ATTACHMENT 1)

NON-PRODUCTION DIMENSIONAL MATERIALS WSS-M99P9999-A1
Supplier Name______________________________
Global Supplier Data Base (GSDB) Code:________________________
Supplier Contact:_______________________________

Supplier Phone: ________________ Ext:___________________ Supplier FAX Number:______________________

Supplier Email:_____________________________

Supplier Part Number:___________________________ Supplier Part Description_____________________

Ford Motor Company Engineering Contact:________________________________ Phone Number:____________________________

INSTRUCTIONS: The above item (by part number) contains the following substance(s) listed in the current version of the Ford Engineering Material Standard. Ford Motor
Company WSS-M99P9999-A1 policy requires that suppliers disclose listed substance information related to the product supplied. Products, for which full disclosure of
ingredients has been supplied to Toxicology according to Section 3.0 of the Standard, do not require additional reporting.

PLEASE COMPLETE AND RETURN THIS FORM VIA FAX TO THE N. AMERICAN GLOBAL MATERIALS & FASTENER STANDARDS OFFICE: FAX 1-313-317-7880

REQUEST FOR ACKNOWLEDGEMENT: The above item (by part number) contains the following substance(s) listed in WSS-M99P9999-A1. Ford Motor
Company will acknowledge receipt of this report
I CERTIFY THAT THE ITEM(S) IDENTIFIED ON THIS FORM COMPLY WITH WSS-M99P9999-A1

Form completed by: ___________________________ Department:___________________________

Not for Resale, 09/26/2006 09:57:46 MDT
Licensee=Johnson Controls/5912197100

Date:____________________

Detailed Supplier Part Material Material Material Listed substance by CAS Listed Substance Weight Primary Purpose or
Supplier Part/ Weight Name Std No. Weight No. AND chemical name in (kg) Use of Listed
2 3
Part/Spec Product (kg) (kg) Material/Part Substance
Numbers1 Name

Ford Motor Company Acknowledgment: ________________________________________ Date: ______________________

(1) Supplier Part/Specification number used by Ford for procurement.
(2) Report the weight (in kilograms) of the part supplied containing the listed substance.
(3) Report the weight (in kilograms) of the material containing the listed substance.

--`,,,``,`,```,,,,,,```,`````,`-`-`,,`,,`,`,,`---