Solenoid valve 2/2 way N.C.

21HF6K0B250
÷
Combined operation 21HF8K0B400

PRESENTATION:
Combined operation S.V. for interception of fluids compatible
with the construction materials.
Minimum operational pressure is not required.
The materials used and the tests carried out ensure maximum
reliability and duration.
USE: Automation
Heating

PIPE: G 1 - G 1 1/2

COILS: 8W - Ø 13
BDA - BDS - BSA 155°C (class F)
BDF - BDV 180°C (class H)
12W - Ø 13
UDA 155°C (class F)
14W - Ø 13
GDH - GDV 180°C (class H)
IMOULDING AND BOBBIN ARE MADE BY 100% VIRGIN
MATERIAL.
Max. allowable pressure (PS) 16 bar
Ambient temperature:
with coils class F - 10°C + 60°C
with coils class H - 10°C + 80°C

Gaskets Temperature Medium

B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water

E=EPDM
- 10°C + 140°C Water, steam
(ethylene-propylene)
Mineral oils (2°E), gasoline
V=FKM (fluoroelastomer) - 10°C +140°C
gas oil

For seals other than NBR replace the letter “B” with the ones
corresponding to the other seals. E.I. 21HF6K0V250.

Ø Pressure
Pipe Max viscosity Kv Power
Code min M.O.P.D.
ISO 228/1
cSt °E mm l/mn (watt) bar AC bar DC bar
8 5
G1 21HF6K0B250 25 140 12
16
14
8 -
G 1 1/4 21HF7K0B350 12 ~2 35 270 12 0 16 -
14 6
8 -
G 1 1/2 21HF8K0B400 40 280 12 -
14 6

CE Approval
(Pressure Equipment Directive 97/23/CE)
for S.V. 21HF7÷21HF8
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.

09-09-2010 ODE 21HF6K0B250÷21HF8K0B400

 MATERIALS:
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal Standard: V=FKM
On request: E=EPDM B=NBR
Orificie Brass - UNI EN 12165 CW617N
On request:
Connector Pg 9 o Pg 11
Connector conformity ISO 4400
FEATURES:
Electrical conformity IEC 335
Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
SPARE PARTS:
1. Coil: 6. Gasket O-Ring:
See coils list G1 Code R990002/B
2. Complete armature tube:
Code R450603
3. Gasket O-Ring: MAINTENANCE KIT:
Code R990000/B G1
4. Gasket O-Ring: KTGHF5K0B20= 4+5+6
G1 Code R990153/B G 1 1/4÷G 1 1/2
G11/4÷G11/2CodeR992061/B KTGHF7K0B35=4+5
5. Complete diaphragm
with plunger:
G1 Code R452269/B
G 1 1/4÷G 1 1/2 Code R452395/B
DIMENSIONS:

POWER ABSORPTION DIMENSIONS

Pipe A B C COIL
Type W Hold Inrush D E F
ISO 228/1 mm mm mm TYPE
VA ~ VA ~ mm mm mm
21HF6K0B250 G1 65 110 104
B 8 14,5 25 30 42 54
21HF7K0B350 G 1 1/4
94 130 128 U 12 23 35 36 48 60
21HF8K0B400 G 1 1/2
G 14 27 43 52 55 67

21HF6K0B250÷21HF8K0B400 ODE 09-09-2010

 Solenoid valve 2/2 way N.C.
21HF5K0B200
Combined operation

PRESENTATION:
Combined operation S.V. for interception of fluids compatible
with the construction materials.
Minimum operational pressure is not required.
The materials used and the tests carried out ensure maximum
reliability and duration.
USE: Automation - Heating
PIPE: G 3/4

COILS: 8W - Ø 13
BDA -BDS - BSA 155°C (class F)
BDP 160°C (high temperature)
BDF- BDV 180°C (class H)
12W - Ø 13
UDA 155°C (class F)
14W - Ø 13
GDH -GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN
MATERIAL.
Max. allowable pressure (PS)
Ambient temperature:
16 bar
Special item-not standard
with coil class F and high temperature - 10°C + 60°C
with coil class H - 10°C + 80°C
Gaskets Temperature Medium
B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water

E=EPDM
- 10°C + 140°C Water, steam
(ethylene-propylene)
Mineral oils (2°E), gasoline
V=FKM (fluoroelastomer) - 10°C +140°C
gas oil
For seals other than NBR replace the letter “B” with the ones
corresponding to the other seals. E.I. 21HF5K0V200.
Ø Pressure
Pipe Max viscosity Kv Power
Code min M.O.P.D.
ISO 228/1
cSt °E mm l/mn (watt) bar AC bar DC bar
8 6
G 3/4 21HF5K0B200 12 ~2 20 120 12 0 16
16
14

Note
Available on request and with minimum quantities.

The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.

08-02-2010 (Internal technical data sheet) ODE 21HF5K0B200

 MATERIALS:
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal Standard: V=FKM
On request: E=EPDM B=NBR
Orificie Brass - UNI EN 12165 CW617N
On request:
Connector Pg 9 o Pg 11
Connector conformity ISO 4400
FEATURES:
Electrical conformity IEC 335
Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
SPARE PARTS:
1. Coil: MAINTNANCE KIT:
See coils list
KTGHF5K0B20= 4+5 +6
2. Complete armature tube:
Code R450603
3. Gasket O-Ring:
Code R990000/B
4. Gasket O-Ring:
Code R990153/B
5. Complete diaphragm
with plunger:
Code R452269/B
6. Gasket O-Ring:
Code R990002/B
DIMENSIONS:

COIL POWER ABSORPTION DIMENSIONS

W Inrush Hold TYPE D E F
Pipe A B C
Type VA ~ VA ~ mm mm mm
ISO 228/1 mm mm mm
8W 25 14,5 B 30 42 54
21HF5K0B200 G 3/4 65 103 104
12 W 35 25 U 36 48 60
14 W 43 27 G 52 55 67

21HF5K0B200 (Internal technical data sheet) ODE 08-02-2010

 Solenoid valve 2/2 way N.C. 21H11K0B120
÷
Combined operation 21H14K0B250-S

PRESENTATION:
Combined operation S.V. for interception of fluids compatible
with the construction materials.
Minimum operational pressure is not required.
The materials used and the tests undertaken ensure maximum
reliability and duration.
USE:
: Automation
Heating

PIPES: G 3/8 - G 1

COILS: 8W - Ø 13
BDA - BDS - BSA 155°C (class F)
BDF - BDV 180°C (class H)
12W - Ø 13
UDA 155°C (class F)
14W - Ø 13
GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN
MATERIAL.
Max. allowable pressure (PS)
G 3/8 - G 1/2 20 bar
G 3/4 - G 1 16 bar
Ambient temperature:
with coils class F - 10°C + 60°C
with coils class H - 10°C + 80°C

Gaskets Temperatur Medium

Mineral oils (2°E),gasoline
V=FKM (fluoroelastomer) - 10°C +140°C
gas oil

B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water

E=EPDM
- 10°C +140°C Water, low pressure steam
(ethylene-propylene)

For seals other than NBR replace the letter “B” with the ones
corresponding to the other seals. E.I. 21H11K0V120.
Ø Pressure
Pipe Max viscosity Kv Power
Code min M.O.P.D.
ISO 228/1
cSt °E mm l/mn (watt) bar AC bar DC bar
8 16 1,5
G 3/8 21H11K0B120 28 12 6
20
14 15
12
8 16 1,5
G 1/2 21H12K0B120 32 12 6
20
14 15
8 5
21H13K0B190 70 12 12 -
12 ~2 0
G 3/4 19 14 15
12 1,5
*21H13K0B190-S 65 -
14 6
8 5
21H14K0B250 105 12 12 -
G1 25 14 15
12 1
*21H14K0B250-S 95 -
14 6
Note
* For DC only.
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.

09-09-2010
0V250-S ODE 21H11K0V120 ÷ 21H14K0V250-S
 MATERIALS:
Body Brass - UNI EN 12165 CW617N
Welded armature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal Standard: V=FKM
On request: B=NBR E=EPDM
Orifice Brass - UNI EN 12165 CW617
On request:
Connector Pg 9 or Pg 11
Connector conformity ISO 4400
FEATURES:
Electrical conformity IEC 335
Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
SPARE PARTS:
1. Coil: 5. Gasket O-Ring :
See coils list G 3/4-G 1 Code R990002/
2. Complete armature tube
without gasket: MAINTENANCE KIT:
Code R450603 G 3/8÷G 1/2
3. Gasket O-Ring : KTGH11K0B12=4
Code R990000/B G 3/4÷G 1
4. Complete diaphragm KTGH13K0B19=4+5
with plunger:
G 3/8 -G 1/2 Code R452127/B
G 3/4 -G 1 Code R452128/B

DIMENSIONS:

Pipe A B C POWER ABSORPTION DIMENSIONS

Type COIL
ISO 228/1 mm mm mm W Hold Inrush D E F
TYPE
21H11K0B120 G 3/8 VA ~ VA ~ mm mm mm
40 100 50
21H12K0B120 G 1/2 B 8 14,5 25 30 42 54
21H13K0B190 G 3/4 105 U 12 23 35 36 48 60
65 104
21H14K0B250 G1 112 G 14 27 43 52 55 67

21H11K0V120 ÷ 21H14K0V250-S ODE 09-09-2010