MPPT Max 64V @ 48V
HIGH DC INPUT 66V EQUALIZATION CHARGING
Batteryless
support*
Max 9 units PF = 1.0
PARALLEL SUPPORT* ENERGY EFFICIENT
*available on 5048MG only
PIP-MS/MG SERIES 1012MS 2024MS 3024MS 4048MS(1) 5048MS 5048MG
MAIN FEATURES ELECTRICAL SPECIFICATIONS
Continuous Output 1000W 2000W 3000W 4000W 5000W 5000W
● NEW! energy-efficient power factor 1.0 design Parallel-ready NO YES, MAX 9 UNITS
Batteryless Operation NO YES
● Parallel-ready up to 9 units (4-5K only) Input Power Factor 1
● Equalization charging up to 64V (MS 4-5K only) Input Voltage Range 90~280VAC (Appliance mode), 170~280VAC (UPS mode)
Input/Output Frequency 50Hz / 60Hz
● Max DC limit up to 66V (MS 4-5k only) Output Voltage 230VAC±5%
Output Waveform Pure Sine Wave
● High PV 450V input + Batteryless Operation Output Regulation < 3% RMS for battery voltage range
(MG 5k only) Output Short Circuit Circuit Breaker
Peak Efficiency 95% (line mode) / 91% (inverter mode)
● Bulk charge (C.V.) setting time
Transfer Time <10ms (UPS mode), <20ms (Appliance mode) **
● Built-in MPPT solar charger up to 80A Charging Mode 3-stage
Nominal DC Voltage 12V 24V 48V
● High frequency pure sine wave design Bulk Volt (Flooded, AGM) 14.6, 14.1V 29.2, 28.2V 58.4, 56.4V
Float Volt 13.5V 27.0V 54.0V 54.0V
● Suitable for with or without grid input
Max DC Volt 15.5V 31.0V 66.0V 63.0V
● Programmable parameters Max AC Charging Current 20Amp 30Amp 60Amp 80A
No Load Consumption <15W <25W <50W <50W
● Max up to 80A utility charging
Power Saving Mode <5W <10W <15W <15W
● Adjustable bulk/float voltage Solar Charger
Algorithm MPPT
● Wide AC input range System DC Voltage 12V 24V 48V 48V
● Lightweight, easy to install Max PV Input Voc 102V 75V 145V 450V
MPPT Range 15 - 80V 30 - 66V 60 - 115V 120 - 430V
● FREE monitoring software Max Charging Amp/Watt 40A, 500W 25A, 600W 80A, 4000W 80A, 4500W
ENVIRONMENTAL / MECHANICAL SPECIFICATIONS
● LCD Display + LED indicators Certification CE
Operating/Storage Temp. 0°C ~ 55°C / -15°C~ 60°C
Operating Humidity 20~90%RH Non-Condensing
Dimension 355*272*100mm 468*295*120mm
Net Weight 7.0Kg 7.0Kg 7.5Kg 12.5Kg 13.5Kg 11Kg
*MPP Solar Inc. reserves the right to change product specification without notice. MPP Solar is a registered trademark.
**Parallel Mode transfer time is 30ms
Special Features
**Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
Optional Accessories
This accessory is applicable to select
48VDC models of HS and MS series
inverters. It is a required component to
be installed in every unit of a parallel
system. A parallel kit includes:
● 1 X PARALLEL BOARD
● 1 X PARALLEL COMM CABLE
● 1 X CURRENT SHARING CABLE
*IMPORTANT: please do not attempt to parallel non-parallel-ready inverters together, as this will
result instant damage of all units!
This device is an extension of the HS/MS inverter’s
LCD module and allows user to implement control
on settings and monitoring from a distance away,
one unit at a time.
This remote module can coexist with the built-in
LCD display and is compatible with most models in
the HS/MS inverter series. Default operating
distance: 15m via RJ45 network cable (fixed length
cable included)
*For more details on pricing, availability and installation guide, please contact us directly.
**Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
