Photovoltaics
Now supports PylonTech LITHIUM Batteries!
MPI Hybrid Series
These hybrid solar inverters combine the features of both grid-tied and off grid
operations, and allow users to operate in 3 main modes:
● Grid-Tied (Feedback)
● Off Grid
● Grid-Tied with Battery Backup
Available in 5KW, 5.5KW (single phase) and 10kw (3 phase), these hybrid systems
offer an excellent all-in-one solution of off-grid inverter + grid-tie inverter +
battery charger. Able to accept PV input voltage up to 900V (5K, 10K only) with
MPPT functionality, the Hybrid family can support up to max PV array sizes of up
to 14.85KW. This enables users great flexibility in running load as well as feeding
extra solar power back to grid. When grid fails, these systems will switch to
battery source like an off-grid inverter and keep load backed up. The bundled
monitoring software, SolarPower, offers powerful features that allow users total
control and access to a wide variety of operations to meet different application
demand. Hybrid models are fully compliant to and certified in VDE (Germany) and
CE standards (AS4777 available on 5.5K and 10K only).
**Optional accessories such as MODBUS card, MODBUS server, and Energy Meter are available upon request
New Features
HIGH CHARGING STACKABLE
Max battery Supports parallel
charging current operation up to 6
now up to 200A! units max!
(10K) (4K,5K, 10K only)
EMS PORT DUAL AC INPUT
this useful port is grid + generator.
for emergency Genset starter dry
light load, 230V/5A contact available
(4K, 5K only) (4K, 5K only)
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
Operation Modes
In this operation mode, users can program unit to
● Feedback PV power to utility
● Provide PV power to load
● Charge battery by PV
SOLAR UTILITY Different priority settings are available in this mode.
Charging source may be selected from PV and grid
as default, PV only, or none (when charging not
intended). All programming conditions can be done
in the CD-bundled software.
BATTERY HOUSE LOAD
In this operation mode, the inverter will only
behave like a pure grid-tie inverter where it only
feeds back electricity to grid from PV source.
SOLAR UTILITY
There is no priority setting available when this
mode is selected.
BATTERY HOUSE LOAD
In this operation mode, grid feedback to utility is
disabled. Users can only program unit to:
● Provide PV power to load
● Charge battery by PV
SOLAR UTILITY Different priority settings are also available, and
grid relay may be connected to inverter to provide
support when load > 3kw. Charging source may be
selected from PV and grid, PV only, or none
(charging not intended). All programming can be
BATTERY HOUSE LOAD done in the CD-bundled software.
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
Specifications
MPI HYBRID SERIES 5K 5.5K 10K
MAIN SPECS
Continuous Output 5,000W 5,500W 10,000W
Parallel-Ready Yes, up to 6 units No Yes, up to 6 units
PV INPUT RATING (GRID-TIED)
Max PV Input Power 10,000W 6,500W 14,850W
Max PV Input Voltage 900Vdc 500Vdc 900Vdc
Start-up / Initial Feeding Voltage 250 / 300 Vdc 116 / 150Vdc 320 / 350 Vdc
PV MPPT Range 250 - 850 Vdc 120 - 450Vdc 350 - 850 Vdc
Max PV Input Current 10A x 2 13A x 2 18A x 2
MPPT Tracker 2 2 2
Max DC/AC Conversion Efficiency >96%
AC INPUT SPECS
Start-up / Auto Restart Voltage 120 - 140Vac / 180Vac (per phase)
Input Voltage Range 170 - 280Vac (per phase)
Nominal Frequency 50 / 60 Hz
Max AC Input Current 40A 40A 25A
AC OUTPUT SPECS
Nominal AC Output Voltage 208/220/230/240Vac, Single Phase 400Vac, 3-Phase
Output Voltage Range 184 - 265Vac 184 - 265Vac (P-N) / 318 - 460Vac (P-P)
Output Frequency (GRID-TIE) 47.5 - 51.5Hz / 59.3 - 60.5 Hz
Output Frequency (OFF-GRID) 50 / 60Hz, auto-sensing
Output Waveform Pure Sine Wave
Max Output Power (via grid relay) 7,000W 6,500W 16,000W
Max Output Power (battery) 5,000W 5,500W 10,000W
Max Efficiency >93% >91%
BATTERY CHARGER
Nominal DC Voltage 48Vdc
Max Charging Current 100A 60A 200A
ENVIRONMENTAL / COMMUNICATION
Communication Port RS232 / USB, Intelligent Slot (card)
EN62109-1, EN62109-2, EN62040-1 / CE, VDE4105, VDE0126-1-1,
Certifications
AS4777/3100 (5.5K, 10K only)
Operating Temp. -10 - 50°C 0 - 40°C -10 - 50°C
Operating Humidity 0 - 90% RH (No condensing)
Dimension 600*460*200mm 450*445*110mm 622*500*167mm
Net Weight 29Kg 16Kg 45Kg
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
