Country of Origin : China
Operating Temperature : 0~40 [°C]
GREEN MODE RoHS
Dimension : 93.5 x 46 x 35.8 [mm]
Certified AC Plugs: EU, UK, USA/Japan, Aus, Korea, Brazil, Argentina, China, India, S. Africa
Efficiency level (ErP) :
VI
Approvals / Marks :
BIS
Specifications
Voltage DC Loading Max. Power Ripple / Noise Connector
Model
[V] [A] [W] [mV] p-p [mm]
SYS1541-1505-Wxx* 5 0~3.0 15 180 2.1x5.5x11
SYS1541-1809-Wxx* 9 0~2.0 18 180 2.1x5.5x11
SYS1541-2412-Wxx* 12 0~2.0 24 180 2.1x5.5x11
SYS1541-2415-Wxx* 15 0~1.6 24 200 2.1x5.5x11
SYS1541-2418-Wxx* 18 0~1.33 24 240 2.1x5.5x11
SYS1541-2424-Wxx* 24 0~1.0 24 300 2.1x5.5x11
Features:
Certified plugs
Wxx = W2E - Europe | W3U - England | W2 - USA, Canada, Japan,Taiwan | W2A - Australia | W2B - Brazil | W2G - Argentina | W2C - China | W2K - Korea | W2I - India | W3S - South Africa
Output connector: standard: 2.1 x 5.5 x 11mm or customer requirement | Regulated Output With Low Ripple Noise | Safety Agency Requirements and EMI/EMS Certified
Private Label Marking Available | Modified and Custom Design Available | 2 Years Warranty
OUTPUT EMC
Turn delay 5000ms max@AC low line input@output full load
Meet EN550022 class B, FCCpart 15 Sub part B class B
Hold up time 5ms min@AC nominal input@output full load (>half cycle)
EN 60950-1:2006+All｜LVD2006/95/EC｜IEC 60950-1:2005
Meet CEC,DOE,ERP,MEPS Level VI
Efficiency (Normal)
@115v/60HZ,230V/50HZ SAFETY
0.4V dv max At AC nominal input loading from 20%load to
UL | GS | CB | CE | FCC | CCC | BSMI | EK-Mark (2412/2424) | SAA | RCM | PSB (2424) | EAC |
Transient response 80%load
INMETRO | BIS (2424)
(dv,tmax) 16ms tmax Dynamic rise time 10us max,duty 40ms
max,Dynamic load step is slew rate of 0.5A/us OTHERS
Power out.Limit Peak 28w Dielectric Strength
Primary to Secondary:3000VAC 10mA/60S
(Hi-pot)
Burn in limit Full load 2 Hours
M.T.B.F 500,000 Calculated Hours at 25ºC, by Telcordia SR-332
Less than 0.075W ms max. At AC nominal input@output min
Power consumption
load Cable Length 1500mm (5 feet) standard cable or as required
INPUT PLD
Line power surge | Line voltage SAG-more info on request
Voltage (90~264)VAC (power line disturbance)
Frequency (47~63)hz Cooling method Natural Convection Cooling
Current 0.5A rms@AC low line input and DC output full load Housing material PC
Inrush Surge Current 40/60A max@power supply cold start,ambient temperature
(cold start) 25°C @115Vac/230Vac nominal AC input Temperature coefficient: <±0.5%/℃
leakage current 0.25mA Max ENVIRONMENT
PROTECTION Temperature Operating: 0~40℃ / Storage: -20%~85%℃
The power supply will self-protect any output to ground. And
Operating: 8%~90%RH / Storage: 5%~95% RH non con-
Over current/ auto recovery when abnormal circuit faults remove ,An output Humidity
densing
Short protection short circuit is defined as any output impedance of less than
0.1 ohms. WEIGHT
Over Voltage The power supply will be auto recovered when faults remove
NW: 135g/pc
F1:1A 250V Fuse The power supply shall be protected
Input protection GW: 12.5kg/box
against power line surges and any abnormal condition
The power supply is provided with no load operation to
No Load protection PACKING
prevent the power supply and system from damage.
Protection class II, (ITU-T K.21 Surge 6KV on request) PE plastic bag 63 pcs/1 box
Mechanical case specification:
Mechanical specification (country housing):
Europe type (W2E) US type (W2) Australia type (W2A)
Brazil type (W2B)
Argentina type (W2G)
Korea type (W2K)
UK type (W3U) China type (W2C)
Cable specification:
1185#18*1C | 1500mm
