Scribd
Upload
116 views1 page

Dodge Caliber Oil Reset Guide

The document provides instructions for resetting the service indicator on a 2007-2011 Dodge Caliber 2.4L. To reset the indicator, turn the ignition on and within 10 seconds press and release the accelerator pedal 3 times, then turn the ignition off. The reset procedure only clears the indicator for an oil change. Repeating the steps may be needed if the reset fails.

Uploaded by

Mshibonium
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views1 page

Dodge Caliber Oil Reset Guide

The document provides instructions for resetting the service indicator on a 2007-2011 Dodge Caliber 2.4L. To reset the indicator, turn the ignition on and within 10 seconds press and release the accelerator pedal 3 times, then turn the ignition off. The reset procedure only clears the indicator for an oil change. Repeating the steps may be needed if the reset fails.

Uploaded by

Mshibonium
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DODGE Caliber 2.

4 (ED3) 2007 - 2011 November 22, 2022

Repair Manuals

Service indicator reset


Service indicator reset
The service indicator refers only to oil change

Turn the ignition on


Within 10 seconds
Press and release the accelerator pedal 3 times
Turn the ignition off
The system is reset
Repeat the procedure if required

All trademark names mentioned herein are for reference purpose only and are not intended to suggest any connection between HaynesPro and such
companies. All trademarks are the property of their respective owners.

Page 1 of 1

You might also like