Scribd
Upload
111 views2 pages

SWP Forklift Truck AS519

This document provides a safe work procedure for operating a forklift. It outlines required personal protective equipment and pre-operational, operational, and post-operational safety checks. Some key checks include inspecting brakes, lights, and load capacity. When operating, drivers must watch for pedestrians, avoid overhead hazards when lifting loads, and have guides for blind corners. The procedure also lists prohibited actions like allowing riders or traveling with elevated forks. The goal is to provide guidance to safely use forklifts and complement training.

Uploaded by

Ravindra Tiwari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
111 views2 pages

SWP Forklift Truck AS519

This document provides a safe work procedure for operating a forklift. It outlines required personal protective equipment and pre-operational, operational, and post-operational safety checks. Some key checks include inspecting brakes, lights, and load capacity. When operating, drivers must watch for pedestrians, avoid overhead hazards when lifting loads, and have guides for blind corners. The procedure also lists prohibited actions like allowing riders or traveling with elevated forks. The goal is to provide guidance to safely use forklifts and complement training.

Uploaded by

Ravindra Tiwari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

(Your Business Name Here) – Safe Work Procedure

FORKLIFT TRUCK
DO NOT use this equipment unless you have been instructed
in its safe use and operation and have been given permission

PERSONAL PROTECTIVE EQUIPMENT

PRE-OPERATIONAL SAFETY CHECKS


 For battery-operated vehicles, charge in well-
 Locate and ensure you are familiar with all machine ventilated area.
operations and controls.

 Check brakes, lights and horn before use.


 Ensure reversing beeper and warning lights are
operational.

 Ensure seat belt/safety restraint is in good condition.


 Know the capacity of the forklift before using it. Do
not use a forklift without a load rating plate.

 Check gas-powered vehicles for gas leaks in fuel


lines.

 Ensure the lifting forks are in sound condition and


centred either side of the mast.

 Check tyre pressures. Never drive with a flat or


under-inflated tyre.

OPERATIONAL SAFETY CHECKS


 Watch out for pedestrians.
 Ensure the lifting tines are secure into the pallet and
the load is stable before lifting or driving off.

 Be careful of ceiling clearance or overhead


obstructions when raising the mast.

 Always remember that the safe working load of a


forklift reduces as the mast is tilted forward.

 Always put the heavy end of the load against the


load backrest.

 When approaching a blind corner, use horn and


drive slowly.

 Always have someone guide you if a load restricts


your vision.

 Slow down when changing direction or on wet or


greasy surfaces.

 Avoid harsh braking, especially when carrying a


load.

REFUELLING
 For gas-powered vehicles, change gas bottles in a
well-ventilated area clear of a naked flame or source
of ignition.
ENDING OPERATIONS AND CLEANING UP
 When stopping the forklift:
- Park on even ground and lower the forks to the
ground.
- Shift the gear selector to park position and apply
the parking brake.
- Turn off the ignition and remove the keys.

 For gas-powered vehicles, turn off gas and don’t


park near an ignition source, doorway or pit.

DON’T
 Do not use faulty equipment. Report any faults
immediately.

 Do not use engine-powered forklifts in poorly


ventilated areas.

 Do not allow anyone to ride on the forks.

 Do not lift a load with the mast tilted forward.

 Do not travel with forks raised or reach mechanism


extended.

 Never travel with the load elevated.

 Do not attempt to turn on an incline or sloping


surface.

 Do not dismount from a forklift while the engine is


running unless the vehicle has completely stopped,
transmission is in park position, and the parking
brake is effectively engaged.

 Do not leave forks elevated when forklift is


unattended.

 Do not refuel an engine-powered forklift unless the


motor is stopped and ignition turned off.

This SWP does not necessarily cover all possible hazards


associated with this equipment and should be used in
conjunction with other references. It is designed as a guide
to be used to compliment training and as a reminder to
users prior to equipment use.

This information is based on material published by the


South Australian Department of Education and Children’s
Services.

You might also like