12/14/22, 2:54 PM Engine specifications for MAN D2676, characteristics, oil, performance
Home > Engines > MAN engines >
Engine MAN D2676
Engine MAN D2676
The D2676LF in-line 6-cylinder engines with a displacement of 12.4 liters, depending
on the version, can comply with the environmental standards Euro 3, Euro 4, Euro 5.
These engines operate with a common rail high pressure fuel injection system in
combination with the EDC 7 electronic injection control system. (Electronic Diesel
Control).
MAN engines of the D2676 series are equipped with a one-piece cylinder head with
overhead camshaft (OHC – Over-Head-Camshaft). The cylinder head is made of spe-
cial cast iron and has shrunken valve seat inserts and pressed-in replaceable valve
guides. The valve guides on all four valves are fitted with valve stem seals. The
valves are actuated via individually replaceable rocker arms on the rocker arm
shafts. The engine brake on the exhaust valves (EVB – Exhaust Valve Drake) is de-
signed as individually replaceable bridges.
https://mymotorlist.com/engines/man/d2676/ 1/4
12/14/22, 2:54 PM Engine specifications for MAN D2676, characteristics, oil, performance
Specifications
Factory markings D 2676 LF 26
Power output 324 kW / 440 hp
Displacement 12412 cc
Number of cylinders 6 pieces
Valves 24 pieces
Manufacturer MAN
Torque output 2100 Nm / 930 rpm
Cylinder bore 126 mm
Piston stroke 166 mm
Main bearings 7 pieces
Power Index 35 hp per liter (1000 cc) displacement
1. Coolant manifold
2. Cylinder head cover
https://mymotorlist.com/engines/man/d2676/ 2/4
12/14/22, 2:54 PM Engine specifications for MAN D2676, characteristics, oil, performance
3. Intake pipe
4. Wire shaft cover
5. Engine control unit
6. Flywheel housing / gear housing
7. Profile hose
8. single cylinder air compressor
9. Pump No. 1 of the power steering
10. Hydraulic pump
11. Pump No. 2 power steering
12. Carter
13. Fuel Treatment System (KSC)
14. Discharge line
15. Fuel priming pump
16. High pressure pump
17. High pressure pump drive
18. Generator
19. Oil pan
20. PriTarder
21. Thermostat manifold
22. Charge air manifold
23. Coolant manifold
24. Glow plug
25. Oil module
26. AGR module
27. Charge pipe
The TGS and TGX models are equipped with the new D20 Common Rail / D26
Common Rail in-line six-cylinder diesel engines (R6) (engine numbers 1-3). The en-
gines are available in the Euro 4 version with a cooled exhaust gas recirculation sys-
tem and PM-Kat® catalyst, as well as in the Euro 5 version based on SCR technology
(Selective Catalytic Reduction, AdBlue as an exhaust emission additive). The newly
developed V8 Common Rail engine from the D28 engine family complements the
TGX range program. In accordance with European regulations, the engines are
equipped with an On-Board-Diagnose system, including a NOx sensor (torque reduc-
tion in the event of excess NOx emissions).
D26 Common Rail Engines
Vehicle designation Power [kW] Engine designation
xx.480 353 kW D2676LF14
https://mymotorlist.com/engines/man/d2676/ 3/4
12/14/22, 2:54 PM Engine specifications for MAN D2676, characteristics, oil, performance
xx.540 397 kW D2676LF13
xx.480 353 kW D2676LF16
xx.540 397 kW D2676LF15
Related
Engine MAN D0824 Engine MAN D2876
Engine MAN D0834 Engine Volvo D16G600
© 2022 MyMotorList.com — the most complete catalog of descriptions of engines, wiki engines.
https://mymotorlist.com/engines/man/d2676/ 4/4
