GB Threading SN20232

CATALOG &
TECHNICAL
GUIDE 2023.2
THREADING
>30,000
STANDARD PRODUCTS
> 75
COUNTRIES
> 4,100
DEDICATED EMPLOYEES
Headquartered in Fagersta, Sweden and present in more than

75 countries, Seco Tools is a leading global provider of metal
cutting solutions for milling, stationary tools, holemaking and
tooling systems.
For more than 80 years, the company has provided the

technologies, processes and support that manufacturers
depend on for maximum productivity and profitability.
For more information on how Seco’s innovative products
and expert services bring success to manufacturers across all
industry segments, please visit www.secotools.com.
Table of content
Introduction
Alphanumeric index ..........................................................................................................2-5
Thread turning
Technical information .................................................................................................... 6-53
Thread turning
Jetstream Tooling® toolholders .................................................................................... 54-59
External toolholders .................................................................................................... 60-69
Internal toolholders .......................................................................................................70-78
Seco-Capto™ toolholders ........................................................................................... 79-95
Steadyline® GL-heads toolholders............................................................................... 96-98
Quick Change toolholders .................................................................................................99
MDT
Peeling toolholders ...................................................................................................100-101
Pipe-facing toolholders............................................................................................. 102-103
Seco-Capto™ Multi insert pocket toolholders ..........................................................104-105
Chasers toolholders ................................................................................................. 106-113
Precision Grooves toolholders ................................................................................. 114-123
Inserts....................................................................................................................... 124-177
Chasers .................................................................................................................... 178-179
Chipformers ..............................................................................................................180-182
Mini-Shaft™
Thread MDT
Toolholders ...............................................................................................................183-192
Inserts.......................................................................................................................193-195
Thread Mini-Shaft™
Toolholders ...............................................................................................................196-199
Thread milling
Inserts...................................................................................................................... 200-206
Thread milling
Technical information ............................................................................................... 207-214
Threadmaster™ ........................................................................................................215-220
Cutting data ..............................................................................................................221-226
Code keys.................................................................................................................227-228
Thread milling indexable ......................................................................................... 229-240
Thread tapping
Thread milling shanks .............................................................................................. 241-247
Thread tapping
Threadmaster™ Taps technical information and overview ..................................... 248-286
Threadmaster™ Taps ............................................................................................... 287-474
Annex
Annex
Declaration of conformity .........................................................................................475-477

SMG Workpiece materials ...................................................................................... 478-489
1
www.secotools.com
Alphanumeric index – Tools
2 M
22NR/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 MF-V060-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474
3 MF-V063-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
335.14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243-244 MSGNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103-104
Thread turning
335.14-ER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 MTH-M003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437

A MTH-M003-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438
A..-CGGR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 MTH-M004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
A..-CGIR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190,192 MTH-M004-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
A..-SGXN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198,200 MTH-N001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441
A..-SGXN..-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 MTH-N002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
C MTH-P001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427
C..CER/L..X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 MTH-P001-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
C..CNR/L..X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109-111 MTH-P002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
C..CNR/L.C-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112-113 MTH-P002-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
C.-CER/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 MTH-P003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
C.-CER/L-..CHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-83 MTH-P003-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
C.-CER/L-..HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-81,84,95-96 MTH-P004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
C.-CNR/L-..CHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92-94 MTH-P004-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434
MDT
C.-CNR/L-..HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85-91 MTH-P011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .435-436

C.-DSKNR/L-PCLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 MTH-S001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
C.-MSKNR/L-PCLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MTH-S002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444
C.-SNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85-86 MTH-S003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445
CEAR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 MTH-S004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446
CEAR/L...D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 MTH-S011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447
CEAR/L...HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 MTH-S012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448
CEAR/L...QHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 MTH-S031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449
CER/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 MTH-S032 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
CER/L...D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 MTH-S041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451
CER/L...Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 MTH-S042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
Mini-Shaft™
CER/L...QHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69,123-124 MTH-S043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453

CER/L..CQHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 MTH-S044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
CER/L..Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 MTH-S101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
CER/L..QHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61,64-65 MTH-S102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
CER/L..Q-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 MTH-S111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
CER/L…HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60,69 MTH-S112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458
CER/L…Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62-63 MTH-S142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
CER/L…QHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60,62-63 MTH-V015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460
CER...X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107-108 MTH-V016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461
CER..16HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 MTH-V048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462
CER…CQHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 MTH-V050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
CFIR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 MTP-M003-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413
Thread milling
CFIR/L...JET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 MTP-M004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414

CFMR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 MTP-M004-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
CFMR/L...JET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 MTP-N001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
CFOR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 MTP-N001-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
CFSR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 MTP-N002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
CFTR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 MTP-N002-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419
CNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 MTP-P001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
CNR/L...A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 MTP-P002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
CNR/L...AHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79,122 MTP-P003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
CNR/L...DA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 MTP-P003-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
CNR/L...H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 MTP-P004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409
CNR/L..AHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-77 MTP-P004-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410
CNR/L..APIHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75-77 MTP-P011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411-412
Thread tapping
CNR/L…AHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-72 MTP-S001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420

CNR/L…APIHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 MTP-S002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
CSXCR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101-102 MTP-S011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422
D MTP-S012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
DTM-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 MTP-S013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424
DTM-MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 MTP-S042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
DTM-UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 MTP-S043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
DTM-UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 MTS-K002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
DTM-W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 MTS-K002-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 467
E MTS-K101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
E..-SGXN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199-200 MTS-K101-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465
E..-SGXN..-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 MTS-K102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468
G MTS-K102-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
GL..-CNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MTS-K111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470
Annex
GL..CNR/L..X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 MTS-K121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471

GL..PNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97-98 MTS-K131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472
MTS-K141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
P
PER..QHDJETI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56
PNR/L..AHDJET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57-59
2
www.secotools.com
Alphanumeric index – Tools
Q T
QC..-PER/L-..HDJET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 T32-PNB, G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
R T32-PNB, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301-305
R396.18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231-232,237 T32-PNB, M 6G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306-307
Thread turning
R396.19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231-235,237 T32-PNB, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .310-312
R396.20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236-237 T32-PNB, M LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308-309
S T32-PNB, UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313-314
SNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70,78,117-118 T32-PNB, UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315-316
SNR…A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 T32-PNB-micro, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299-300
T32-R40NC, G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
T32-R40NC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320-324
T32-R40NC, M 6G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
T32-R40NC, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329-331
T32-R40NC, M LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326-328
T32-R40NC, UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332-333
T32-R40NC, UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334-335
T32-R40NC-micro, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318-319
T32-SNC, G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
MDT
T32-SNC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .290-292
T32-SNC, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295-297
T32-SNC, M LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293-294
T32-SNC-micro M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
T32-SNC-micro – M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
T33A-FSCE, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
T33B-FSCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401,404
T33B-FSCE, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
T33-FNC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .384-385
T33-FSCC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397
T33-FSCC, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .402-403
Mini-Shaft™
T33-FSCE, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
T33-FSNC, G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
T33-FSNC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .386-387
T33-FSNC, M 6G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .388-389
T33-FSNC, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .390-391
T33-FSNC, UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .392-393
T33-FSNC, UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .394-395
T34A-R45HC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .364-365
T34A-R45HC, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .370-371
T34A-R45HE, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
T34B-PHB, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341-342
T34B-PHB, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345-346
Thread milling
T34-PHB, EGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352-353
T34-PHB, EGUNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .354-355
T34-PHB, EGUNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356-357
T34-PHB, G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
T34-PHB, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .339-340
T34-PHB, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .343-344
T34-PHB, UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .347-348
T34-PHB, UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349-350
T34-PHB-micro, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337-338
T34-R45HC, G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
T34-R45HC, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360-361
T34-R45HC, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .366-367
T34-R45HC, UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .373-374
Thread tapping
T34-R45HC, UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375-376

T34-R45HC-micro, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .358-359
T34-R45HE, EGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .378-379
T34-R45HE, EGUNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .380-381
T34-R45HE, EGUNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .382-383
T34-R45HE, M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362-363
T34-R45HE, MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .368-369
TM-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
TM-MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
TM-MINI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
TM-NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
TM-NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
TM-UNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
TM-UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Annex
TM-W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
V
V21-CMR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
3
www.secotools.com
Alphanumeric index – Inserts
0 2
09NR / ..A55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 20ER / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
09NR / ..A60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 20ER / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
09NR / ..BSPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 20ER / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Thread turning
09NR / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-136 20NR / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

09NR / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 20NR / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
09NR / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142-143 20NR / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
09NR / ..W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-152 22ER/L / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
1 22ER/L / ..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
10-11.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 22ER/L / ..API RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
11NR/L / ..A55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 22ER/L / ..BUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175,177
11NR/L / ..A60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 22ER/L / ..HEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
11NR/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-137 22ER/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-136
11NR/L / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 22ER/L / ..N55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
11NR/L / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142-144 22ER/L / ..N60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128-129
11NR/L / ..W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-152 22ER/L / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
11NR / ..NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 22ER/L / ..PAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
13NMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 22ER/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
MDT
13XMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 22ER/L / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

16ER/L / ..A55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 22ER/L / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
16ER/L / ..A60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 22ER/L / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139-140
16ER/L / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 22ER/L / ..W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149-150
16ER/L / ..AG55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 22NR/L / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
16ER/L / ..AG60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 22NR/L / ..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
16ER/L / ..APIRD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 22NR/L / ..BUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176,178
16ER/L / ..BSPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 22NR/L / ..HEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
16ER/L / ..BUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 22NR/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-138
16ER/L / ..G55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 22NR/L / ..N55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
16ER/L / ..G60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 22NR/L / ..N60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-131
Mini-Shaft™
16ER/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-134 22NR/L / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

16ER/L / ..MJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 22NR/L / ..PAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
16ER/L / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 22NR/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
16ER/L / ..NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 22NR/L / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
16ER/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 22NR/L / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
16ER/L / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 22NR/L / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142-144
16ER/L / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 22NR/L / ..W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-152
16ER/L / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139-144 26ER / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
16ER/L / ..UNJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 26ER / ..K55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126-127
16ER/L / ..W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149-150 26ER / ..K60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128,130
16ER / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 26ER / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
16NR/L / ..A55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 26ER / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Thread milling
16NR/L / ..A60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-131 26NR / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

16NR/L / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 26NR / ..K55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
16NR/L / ..AG55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 26NR / ..K60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128,130
16NR/L / ..AG60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-131 26NR / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
16NR/L / ..API RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 27ER/L / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
16NR/L / ..BSPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 27ER/L / ..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
16NR/L / ..BUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 27ER/L / ..H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
16NR/L / ..G55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 27ER/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-133
16NR/L / ..G60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-131 27ER/L / ..PAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
16NR/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-137 27ER/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
16NR/L / ..MJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 27ER/L / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
16NR/L / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 27ER/L / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
16NR/L / ..NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 27ER / ..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Thread tapping
16NR/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 27ER / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-133

16NR/L / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 27ER / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
16NR/L / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 27ER / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
16NR/L / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142-144 27NR/L / ..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
16NR/L / ..UNJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 27NR / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
16NR/L / ..W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-152 27NR / ..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170,174
16NR/L / .NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 27NR / ..H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
16V55 / . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 27NR / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135,137
16V60 / . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 27NR / ..PAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
27NR / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
27NR / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
27NR / ..TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
27NR / ..UN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
5
Annex
5-11.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
5-31.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
5-31... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
5-51.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
4
www.secotools.com
Alphanumeric index – Inserts
8 R
8-11.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 R335.14…MNP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
8-21.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 R335.14…UNNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
8-41.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 R335.14…WXF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Thread turning
8-51.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179-180 S
C S-41.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
C-.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181-183 SCNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
L
LCEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201-207
LCGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194-196
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
5
www.secotools.com
Thread turning
Technical information
Code keys
Toolholders
Thread turning
C E R 25 25 M 16 Q HD
1 2 3 4 5 6 7 8 9
1. Insert clamping 2. External/Internal

MDT
S C P
E = External
N = Internal
Screw Clamp Pin

Mini-Shaft™
3. Cutting direction 4. Shank height
L R 00 = Round toolholders S & C

25 = 25 mm (0.984”)
32 = 32 mm (1.260”)
etc.
X = Special
Thread milling
5. Shank width/diameter 6. Tool length
H = 100 mm (3.937”) Q = 180 mm (7.087”)

20 = 20 mm (0.787”) K = 125 mm (4.921”) R = 200 mm (7.874”)
25 = 25 mm (0.984”) L = 140 mm (5.512”) S = 250 mm (9.843”)
etc. M = 150 mm (5.906”) T = 300 mm (11.811”)
P = 170 mm (6.693”) U = 350 mm (13.780”)
V = 400 mm (15.748”)
Thread tapping
7. Cutting edge length 8. Other information
A = Steel with coolant passage

Q = Toolholder/cranked
CQ = For mounting upside down
If the cutting edge length consists of only one digit, the designation should
start with a 0.
9. Other information
Example: H = High density bar

Annex
Cutting edge length = 16,5 mm (0.650”) HD = Heavy duty

Symbol = 16 JET = Jetstream Tooling®
Cutting edge length = 9,525 mm (0.375”) JETI = Jetstream Tooling® Jeti
Symbol = 09
6
www.secotools.com
Thread turning
Code keys
Toolholders
Thread turning
CER-150-6-16QHD
C E R - 150 - 6 - 16 Q HD
1 2 3 4 5 6 7 8 9
1. Insert clamping 2. External/Internal
MDT
S C P
E = External
N = Internal
Screw Clamp Pin
Mini-Shaft™
3. Cutting direction 4. Shank definition
L R 00 = Boring bars
= Square shanks
X = Special
Thread milling
5. Square shank height/width and bar diameter 6. Tool length
3 = 3 inches
For square shank tools height and 4 = 4 inches
width in inches. 5 = 5 inches
For boring bars bar diameter in 6 = 6 inches
inches.
075 = 0.75
100 = 1.00
125 = 1.25
Thread tapping
etc.
7. Cutting edge length 8. Other information
A = Steel with coolant passage

Q = Qualified
CQ = For mounting upside down
If the cutting edge length consists of only one digit, the designation should
start with a 0.
9. Other information
Example: H = High density bar

Annex
Cutting edge length = 16,5 mm (0.650”) HD = Heavy duty

Symbol = 16 JET = Jetstream Tooling®
Cutting edge length = 9,525 mm (0.375”) JETI = Jetstream Tooling® Jeti
Symbol = 09
7
www.secotools.com
Thread turning
Code keys
Inserts
Thread turning
16 E R 1.5 ISO A1
1 2 3 4 5 6
1. Cutting edge length 2. External/Internal

MDT
Example: E = External
Cutting edge length = 16,5 mm (0.650”)
N = Internal
Symbol = 16
Cutting edge length = 9,525 mm (0.375”)
Symbol = 09
If the cutting edge length consists of only one digit, the designation should start
with a 0.
3. Cutting direction 4. Pitch

Mini-Shaft™
Full profile: (mm) 0,50 1,25 3,00 6,00

0,70 1,50 4,00 8,00
0,75 1,75 4,50 10,0
L R 0,80 2,00 5,00 12,0
1,00 2,50 5,50 14,0
Full profile: (TPI) 48 18 11 6.0 2.5

40 16 10 5.0 2.0
32 14 9 4.5
X = Special
24 13 8 4.0
20 12 7 3.0
Partial profile: A = 0,50-1,50 mm 48-16 TPI

AG = 0,50-3,00 mm 48-8 TPI
Thread milling
G = 1,75-3,00 mm 14-8 TPI

N = 3,50-5,00 mm 7-5 TPI
K = 5,50-10,00 mm 4.5-2.5 TPI
5. Thread 6. Number of teeth per cutting edge/ Type of chipbreaker

Thread =
2M = 2 teeth
60 = V profile, 60°
3M = 3 teeth
55 = V profile, 55°
TT = TWIN THREADER
ISO = ISO, Metric
UN = Am. UN
A = Universal
UNJ = Am. Aerospace
Thread tapping
A1 = Chipbreaker designation
MJ = Metr. Aerospace
A2 = Chipbreaker designation
W = Whitworth, BSW
BSPT = Whitworth, Taper
NPT = Am. NPT
NPTF = Am. NPTF (Dryseal)
RD = Round, DIN405
TR = Trapezoidal, DIN103
ACME = Am. ACME-G
STACME = Am. Stub-ACME
API 384 = API V 038R 1:4
API 386 = API V 038R 1:6
API 404 = API V 040 1:4
API 504 = API V 050 1:4
API 506 = API V 050 1:6
Annex
API RD = API Round Casing

BUT 2.5 = Buttress, 1°47’
BUT 2.6 = Buttress, 2°23’
8
www.secotools.com
Thread turning
Selection process
Seco Suggest
Thread turning
In order to simplify the selection of tools and cutting parameters Seco Tools introduce Suggest which eliminates complicated
searching, programming and calculation. Suggest gives you the best suggestion of holder, insert and optimized parameters for
your application and the possibility to download information to the CNC machine.
The application can be found at https://www.secotools.com/dashboard/Suggest/Suggest.
Use the selection process below to choose a suitable tool, insert, cutting data and production method.
MDT
1. Selection of production method, page 10. 2. Selection of insert type, page 11.
Mini-Shaft™
3. Selection of grade, page 12. 4. Selection of toolholder, page 14.
Thread milling
5. Selection of insert shim, pages 15-16. 6. Selection of cutting speed, pages 17-21.
Thread tapping
7. Selection of number of passes and infeed depths,

8. Selection of infeed method, page 34.
pages 22-33.
Ph 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0
3,82 3,52 3,19 2,87 2,53 2,23 1,92 1,60 1,25

ap (0.150) (0.139) (0.126) (0.113) (0.100) (0.088) (0.076) (0.063) (0.049)
0,46 0,43 0,41 0,37 0,34 0,34 0,28 0,27 0,24
Annex
1 (0.018) (0.017) (0.016) (0.015) (0.013) (0.013) (0.011) (0.011) (0.009)

0,43 0,40 0,39 0,34 0,32 0,31 0,26 0,24 0,22
2 (0.017) (0.016) (0.015) (0.013) (0.013) (0.012) (0.010) (0.009) (0.009)
0,35 0,32 0,32 0,28 0,25 0,25 0,21 0,20 0,18
3 (0.014) (0.013) (0.013) (0.011) (0.010) (0.010) (0.008) (0.008) (0.007)
9
www.secotools.com
Thread turning
Production methods
Workpiece
-External or internal thread
Thread turning
-Right or left hand thread

Machine
-Right or left hand tool
Threading towards the chuck Threading away from the chuck*

Benefit:  Best stability Benefit:  Chip flow is correctly directed during
 Originally fitted insert shims can be used for internal threading
most operations
Note:  Chip build-up may occur during internal Note:  Secure clamping of the insert and mounting
threading, particularly if there is little space of the toolholder are necessary
between the threading bar and bore of the
hole
Internal threading:  Use only CNR/L toolholders
MDT
Right-hand thread – Right-hand tool Left-hand thread – Right-hand tool
ER ER
Mini-Shaft™
NR NR
Left-hand thread – Left-hand tool Right-hand thread – Left-hand tool

Thread milling
EL EL
NL NL
*Notice that the insert shim must be changed when threading away from the chuck.
Thread tapping
Annex
Threading away Threading towards

from the chuck the chuck
10
www.secotools.com
Thread turning
Insert types
For single tooth inserts choose a full profile or partial profile design
Thread turning
Single-tooth insert (Type S) A or Original Single-tooth insert (Type S) A1 chipbreaker
First choice, can be used for applications First choice for general applications in
in a variety of materials. Low cutting steel.
forces.
MDT
Single-tooth insert (Type S) A2 chipbreaker Multi-tooth insert (Type M)
First choice for general applications in First choice for mass production, since
stainless steel. fewer passes are necessary.
Only for radial infeed.
2M = 2 teeth version
3M = 3 teeth version
Mini-Shaft™
Multi-tooth insert (TWIN THREADER, TT) K insert (Type K)
Thread milling
Lower cutting forces than M type. First choice for large/coarse threads.
Shorter undercut length than M type.
Only for radial infeed.
Use insert shim for 2M.
Thread tapping
Full profile Partial profile
By topping the thread, the workpiece Covers a wide range of thread pitches,
need not be pre-machined to the exact which simplifies stock-keeping. Requires
diameter and may be a little oversized a correct workpiece diameter prior to
for external threads and undersize for threading. The nose radius of the insert
internal threads. The threading operation is sized to suit the smallest profile within
is simplified since only one tool is needed the pitch range of the insert.
for the entire thread (no subsequent
deburring is needed).
Annex
11
www.secotools.com
Thread turning
Insert grades
Thread turning – Insert grades
Thread turning
Continuous research and development of better materials, coatings and Our product strategy is to provide the market with versatile first choice tools
optimal geometries help fulfil customers requirements. and specific optimized solutions for threading.
Product strategy grades Grade assortment Snap-Tap®
Specific
MDT
Versatile
Performance
Performance
Mini-Shaft™
Material/application
Material/application
Thread milling
Thread tapping
Annex
12
www.secotools.com
Thread turning
Insert grades
Grades
Thread turning
The black areas in the chart indicate a grade’s main ISO application groups and the white areas
indicate other supplementary application groups.
MDT
PVD coated grades
First choice for high-strength steel, martensitic stainless steel, cast iron with low hardness, superalloys and titanium alloys.
First choice for high cutting speeds. Hard micrograin with sharp edge, highly resistant to plastic deformation.
CP200
(Ti,Al)N + TiN
Mini-Shaft™
Wear-resistant grade which is principally intended for high cutting speeds. Optimizing grade in steel and stainless steel.
CP300
(Ti,Al)N + TiN
Universal very tough micrograin grade for all types of threading in most materials. Excellent for stainless steel and difficult
operations.
CP500
Thread milling
(Ti,Al)N + TiN
Fine grain wear resistant grade for optimized performance in carbon steels.
TTP1550
(TiAl)N
Peak performance, wear resistant micrograin grade to be used in steel, stainless steel and cast iron.
The nano-laminated coating increases the wear resistance of the grade.
TTP2050
Thread tapping
(TiAl)N/(TiSi)N
Uncoated grades
First choice for machining normal to hard cast iron. Also suitable for hard steel with a hardness in excess of 350 HB. Micro-
H15
grain with excellent wear-resistance and sharp edge.
Annex
13
www.secotools.com
Thread turning
Toolholders
Thread turning
Use the guidelines below to choose a suitable toolholder type.
External threading
Basic choice CER/L, PER/L

Type C (clamp)
Type P (Pin)
Insert size
16, 20, 22, 26, 27
With insert shim
Cx-CER/L
MDT
Mini-Shaft™
Internal threading
Basic choice CNR/L, PNR/L

Type C (clamp)
Type P (Pin)
Cx-CNR/L Insert size

16, 20, 22, 26, 27
Thread milling
With insert shim
N.B. On 27 mm inserts this angle is 10°

SNR/L
For small holes
Type-S (screw)
Insert sizes
09,11,16, 22
Thread tapping
(No insert shim. To be used only when

threading towards the chuck)
Annex
14
www.secotools.com
Thread turning
Insert shim
Originally fitted insert shims
Thread turning
The table below shows the originally fitted insert shims. These insert shims are suitable for most operations when threading towards the chuck.
Clamp Screw Jetstream Tooling®
Toolholders The helix angle can be selected from +5 to

-2 by changing the insert shim. The same
insert shims are used for both right and left
hand holders. The centre height remains
constant.
External and internal Internal threading External and internal
threading threading
MDT
Single-tooth insert Single-tooth insert Single-tooth insert Single-tooth insert
Insert type
(Type S) (Type K) (Type S) (Type S)
No insert shim
Insert shim ( =2°)
16 GX 16-1 GXA16-1
20 KX 20-2 To receive the correct shape on the thread
Insert size 22 NX22-1 NXA22-1 and uniform wear on the insert the cutting
edge helix angle () should be equal to the
26 KX26-2 thread lead angle (φ).
Mini-Shaft™
27 VX27-1 VXA27-1
The helix angle () can also be calculated. See page 35 for formula.
SNR/L toolholders have no exchangeable insert shim and can therefore only be used for threading towards the chuck. The table below shows the available insert shim range.
Insert shim range
Thread milling
Clamp Jetstream Tooling® Thread turning
Toolholders
External and internal threading External and internal threading
Multi-tooth Multi-tooth
Insert type Single-tooth insert (Type S) Single-tooth insert (Type K) Single-tooth insert (Type S)
insert (Type M) insert (Type M)
Thread tapping
Insert shim
Threading towards the Threading towards Threading away from Threading towards Threading away from Threading towards the Threading towards Threading away from
chuck the chuck the chuck the chuck the chuck chuck the chuck the chuck
GX16-0, -1, GXA16-0, -1,

16 MX16-1 GX16-0 -99 -98 MXA16-1 GXA16-0, -99, -98
-2, -3, -4 -2, -3, -4
KX20-0, -1,
20 KX20-0, -99
-2, -3, -4, -5
NX22-0, -1, NXA22-0, -1,
Insert size 22 MX22-1 NX22-0 -99 -98 MXA22-1 NXA22-0, -99, -98
-2, -3, -4 -2, -3, -4
KX26-0, -1,
26 KX26-0, -99
-2, -3, -4, -5
VX27-0, -1, VXA22-0, -1,
27 MX27-1 VX27-0 -99 -98 MXA27-1 VXA27-0,-99,-98
Annex
-2, -3, -4 -2, -3, -4
15
www.secotools.com
Thread turning
Insert shim
Choice of insert shim
Thread turning
Use the graph below to choose the correct insert shim.

The graph gives the last digit in the insert shim code.
Example: GX16-1
Production method
Threading towards the chuck, use right side of the graph.

Threading away from the chuck, use left side of the graph.
Vertical column - lead

Thread with one start, Lead (Ph) = pitch (P).
Thread with several starts, Lead (Ph) = pitch (P) x number of starts.
MDT
Horizontal column = pitch diameter (D2)
Pitch diameter D2 – threading away from the chuck

Mini-Shaft™
Thread milling
Thread tapping
Annex
Pitch diameter D2 – threading towards the chuck
16
www.secotools.com
Thread turning
SMG – Cutting data

In SMG classification of workpiece materials involves a specific material standard in a specific condition assigned as reference for easy and unabiguous adjustment of cutting data
Thread turning
for any actual material compared to any Seco reference material. As examples the reference materials EN C45E for SMG P4 and EN 42 CrMo 4 for both SMG P5 and SMG H5
shown below in table 1 where the reference level material property is indicated. A more complete extract can be found on page(s) 479-490.
SMG Description Properties Reference SMG Description Properties Reference
42 CrMo 4
H5 Quenched & Tempered steels 38 < HRC < 56
50 HRC
Structural steels, 0.25% < C <
42 CrMo 4
P5 0.67%wt 550 < Rm < 1200
Rm = 700 N/mm2
Quench & Temper steels
Low-alloy general structural steels, 0.25% < C < 0.67%wt C 45E
P4 520 < Rm < 1200
Low-alloy Quench & Temper steels Rm = 660 N/mm2
Focusing specifically on EN 42 CrMo 4 in annealed condition, the ultimate tensile strength Rm may typically vary between Rm = 630 N/mm2 and Rm = 780 N/mm2, which provide
a reference level for SMG P5. In Quenched & Tempered condition, the ultimate tensile strength Rm may typically be between Rm = 900 N/mm2 and Rm = 1100 N/mm2 thus still
MDT
belongs to SMG P5. However, if hardened above Rm = 1200 N/mm2 it instead belongs to SMG H5.
SMG EN W.-Nr AFNOR BS UNI JIS AISI / ASTM GOST Condition Rm_nom HRCnom
42 CrMo 4 1.1201 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 4142, 4140 38HM Annealed 700
P5
42 CrMo 4 1.1201 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 4142, 4140 38HM Quenched & Tempered 1000
H5
The EN 42CrMo4 quench & tempered steel could be used to illustrate the machinability dependence of materials’ condition.
The graphs below indicate how speed recommendations for a nominal material conditions may be adjusted for relative Rm (left diagram valid for ISO-P) and for relative HRC
Mini-Shaft™
(valid for ISO-H).
Thread milling
Thread tapping
To further illustrate how the SMG P5 nominal vc can be adjusted to a more accurate recommended vc we need ultimate tensile strength Rm data and in this case we use the
EN 42 CrMo 4 quenched & tempered to Rm = 1000 N/mm2 according to above table (bold blue arrows).
Assume that we find that the SMG P5 nominal vc = 280 m/min for a certain product and machining.
Then, actual recommended vc = 280 m/min x 0,75 = 210 m/min.
Consequently in the SMG H5 the nominal vc can be adjusted using the hardened EN 42 CrMo 4 at HRC 45 (smaller grey arrows).
Assume that the SMG H5 nominal vc = 50 m/min for a certain product and machining using a coated cemented carbide tools then, actual recommended
vc = 50 m/min x 1,2 = 60 m/min.
For further workpiece material details please see page(s) 479-490 and suggested cutting data at applicable pages.
For more convenient cutting data handling we recommend applicable tools in My Pages – Suggest on www.secotools.com
Annex
17
www.secotools.com
Thread turning
Cutting speed metric (Inch)

vc
m/min
Thread turning
SMG sf/min
CP200 CP300 CP500 H15 TTP2050
— 275 205 — 205
P1
— 900 670 — 670
— 270 200 — 200
P2
— 890 660 — 660
— 230 170 — 170
P3
— 750 560 — 560
— 205 150 — 150
P4
— 670 490 — 490
— 195 145 — 145
P5
— 640 475 — 475
— 220 165 — 165
P6
— 720 540 — 540
— 205 155 — 155
P7
MDT
— 670 510 — 510

— 195 145 — 145
P8
— 640 475 — 475
— 200 150 — 150
P11
— 660 490 — 490
— 120 90 — 90
P12
— 395 295 — 295
150 — 135 100 135
M1
490 — 445 330 445
120 — 110 80 110
M2
395 — 360 260 360
90 — 85 60 85
M3
Mini-Shaft™
295 — 280 195 280

70 — 65 — 65
M4
230 — 215 — 215
55 — 50 — 50
M5
180 — 165 — 165
130 — 120 105 120
K1
425 — 395 345 395
110 — 105 95 105
K2
360 — 345 310 345
95 — 90 80 90
K3
310 — 295 260 295
90 — 85 75 85
K4
295 — 280 245 280
Thread milling
55 — 50 — 50
K5
180 — 165 — 165
80 — 75 — 75
K6
260 — 245 — 245
70 — 65 — 65
K7
230 — 215 — 215
— — — 255 —
N1
— — — 840 —
— — — 165 —
N2
— — — 540 —
— — — 110 —
N3
— — — 360 —
— — 100 150 100
N11
— — 330 490 330
Thread tapping
20 — 20 — 20
S1
65 — 65 — 65
15 — 15 — 15
S2
49 — 49 — 49
15 — 15 — 15
S3
49 — 49 — 49
45 — 39 — 39
S11
150 — 130 — 130
35 — 30 — 30
S12
115 — 100 — 100
27 — 23 — 23
S13
90 — 75 — 75
Use the SMG tables to classify the workpiece material. Use the table to choose cutting speed. Cutting speeds (vc) in the table are recommendations for a start value. Due to machine, material and setup
condition it is advisable to optimize cutting data. Recommended ranges to use for each grade is CP200, CP300, CP500, TTP2050 and H15 +/-15%
Annex
SMG=Seco Material Group

vc = Cutting speed (m/min)
Note that there is a fixed relationship between rotational speed and feed rate in threading. Check that the chosen cutting speed does not result in a too high feed speed.
18
www.secotools.com
Thread turning
Number of passes and infeed depths

A thread cannot be made in one cut because of the relatively brittle cutting edge. The total cutting depth must be divided into several passes. Those passes should all have similar
Thread turning
cutting forces (equal chip areas), see figures.
Use the tables on page 22-33 to find recommendations for number of passes and infeed depths. The tables give basic recommendations and are applicable on all geometries -
Original, A, A1 and A2.
MDT
Mini-Shaft™
• The infeed series given is based on a good control of the OD/ID tolerances for the selected profile.
• If insert fracture should occur, the number of passes should be increased.
• The infeed depth should not be less than 0,05 mm (0.0020”) /pass.
• On stainless steel, the infeed depth per pass should be greater than 0,08 mm (0.0031”).
• The recommendations can also be used for part-profile inserts. The number of passes should then, in most cases, be increased.
• The threading insert nose radius is relatively small and can easily be damaged if it is overloaded.
Thread milling
Thread tapping
Annex
19
www.secotools.com
Thread turning
Cutting speed – MDT metric (Inch)

vc
m/min
Thread turning
SMG sf/min
CP500
155
P1
510
150
P2
490
130
P3
425
115
P4
375
110
P5
360
125
P6
410
115
P7
MDT
375
110
P8
360
115
P11
375
65
P12
215
135
M1
445
110
M2
360
85
M3
Mini-Shaft™
280
65
M4
215
50
M5
165
130
K1
425
110
K2
360
95
K3
310
90
K4
295
Thread milling
55
K5
180
80
K6
260
70
K7
230
—
N1
—
—
N2
—
—
N3
—
85
N11
280
Thread tapping
21
S1
70
17
S2
55
15
S3
49
—
S11
—
—
S12
—
—
S13
—
Use the SMG tables to classify the workpiece material. Use the table to choose cutting speed.
SMG = Seco Material Group
Annex
vc = m/min
Cutting speeds (vc) in the table are recommendations for a start value.
Due to machine, material and setup condition it is advisable to optimize cutting data. Recommended ranges to use for CP500 +/-15%
20
www.secotools.com
Thread turning
Cutting speed – Mini Shaft metric (Inch)

vc
m/min
Thread turning
SMG sf/min
CP500
155
P1
510
150
P2
490
130
P3
425
115
P4
375
110
P5
360
125
P6
410
115
P7
MDT
375
110
P8
360
115
P11
375
65
P12
215
80
M1
260
65
M2
215
50
M3
Mini-Shaft™
165
37
M4
120
31
M5
100
150
K1
490
130
K2
425
110
K3
360
105
K4
345
Thread milling
65
K5
215
95
K6
310
80
K7
260
—
N1
—
—
N2
—
—
N3
—
95
N11
310
Thread tapping
19
S1
60
15
S2
49
13
S3
43
—
S11
—
—
S12
—
—
S13
—
Use the SMG tables to classify the workpiece material. Use the table to choose cutting speed.
Annex
vc = m/min
Due to machine, material and setup condition it is advisable to optimize cutting data. Recommended ranges to use for CP500 +/-15%
21
www.secotools.com
Thread turning
Number of passes and infeed depths

External ISO-metric threads, metric (Inch)
Thread turning
Ph 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.75 1.5 1.25 1.0 0.80 0.75 0.50
3,82 3,52 3,19 2,87 2,53 2,23 1,92 1,60 1,25 1,13 0,93 0,81 0,65 0,52 0,48 0,33
ap
(0.150) (0.139) (0.126) (0.113) (0.100) (0.088) (0.076) (0.063) (0.049) (0.044) (0.037) (0.032) (0.026) (0.020) (0.019) (0.013)
0,46 0,43 0,41 0,37 0,34 0,34 0,28 0,27 0,24 0,22 0,22 0,21 0,18 0,17 0,16 0,11
1
(0.018) (0.017) (0.016) (0.015) (0.013) (0.013) (0.011) (0.011) (0.009) (0.009) (0.009) (0.008) (0.007) (0.007) (0.006) (0.004)
0,43 0,40 0,39 0,34 0,32 0,31 0,26 0,24 0,22 0,20 0,20 0,17 0,16 0,15 0,14 0,09
2
(0.017) (0.016) (0.015) (0.013) (0.013) (0.012) (0.010) (0.009) (0.009) (0.008) (0.008) (0.007) (0.006) (0.006) (0.006) (0.004)
0,35 0,32 0,32 0,28 0,25 0,25 0,21 0,20 0,18 0,17 0,17 0,14 0,12 0,12 0,11 0,07
3
(0.014) (0.013) (0.013) (0.011) (0.010) (0.010) (0.008) (0.008) (0.007) (0.007) (0.007) (0.006) (0.005) (0.005) (0.004) (0.003)
0,30 0,28 0,27 0,24 0,22 0,21 0,18 0,17 0,16 0,14 0,14 0,11 0,11 0,08 0,07 0,06
4
(0.012) (0.011) (0.011) (0.009) (0.009) (0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.004) (0.004) (0.003) (0.003) (0.002)
0,29 0,26 0,24 0,22 0,20 0,18 0,16 0,15 0,14 0,12 0,12 0,10 0,08
5 – – –
(0.011) (0.010) (0.009) (0.009) (0.008) (0.007) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.003)
MDT
0,26 0,24 0,24 0,22 0,18 0,18 0,15 0,15 0,12 0,10 0,08 0,08
6 – – – –
(0.010) (0.009) (0.009) (0.009) (0.007) (0.007) (0.006) (0.006) (0.005) (0.004) (0.003) (0.003)
0,24 0,21 0,22 0,20 0,17 0,16 0,14 0,12 0,11 0,10
7 – – – – – –
(0.009) (0.008) (0.009) (0.008) (0.007) (0.006) (0.006) (0.005) (0.004) (0.004)
0,23 0,20 0,20 0,18 0,15 0,15 0,13 0,11 0,08 0,08
8 – – – – – –
(0.009) (0.008) (0.008) (0.007) (0.006) (0.006) (0.005) (0.004) (0.003) (0.003)
0,22 0,19 0,19 0,17 0,14 0,14 0,12 0,11
9 – – – – – – – –
(0.009) (0.007) (0.007) (0.007) (0.006) (0.006) (0.005) (0.004)
0,19 0,18 0,18 0,16 0,13 0,12 0,11 0,08
10 – – – – – – – –
(0.007) (0.007) (0.007) (0.006) (0.005) (0.005) (0.004) (0.003)
Mini-Shaft™
0,18 0,17 0,16 0,14 0,12 0,11 0,10

11 – – – – – – – – –
(0.007) (0.007) (0.006) (0.006) (0.005) (0.004) (0.004)
0,16 0,15 0,15 0,13 0,12 0,08 0,08
12 – – – – – – – – –
(0.006) (0.006) (0.006) (0.005) (0.005) (0.003) (0.003)
0,15 0,14 0,12 0,12 0,11
13 – – – – – – – – – – –
(0.006) (0.006) (0.005) (0.005) (0.004)
0,13 0,13 0,10 0,10 0,08
14 – – – – – – – – – – –
(0.005) (0.005) (0.004) (0.004) (0.003)
0,13 0,12
15 – – – – – – – – – – – – – –
(0.005) (0.005)
0,10 0,10
16 – – – – – – – – – – – – – –
(0.004) (0.004)
Thread milling
Ph = Lead
ap = Total infeed depth
TPI = Threads per inch
Recommendations are for steel with a hardness < 300 HB
Thread tapping
Annex
22
www.secotools.com
Thread turning
Internal ISO-metric threads, metric (Inch)
Ph 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.75 1.5 1.25 1.0 0.80 0.75 0.50
Thread turning
3,54 3,25 2,96 2,65 2,33 2,05 1,78 1,48 1,17 1,05 0,85 0,75 0,60 0,49 0,46 0,31
ap
(0.139) (0.128) (0.117) (0.104) (0.092) (0.081) (0.070) (0.058) (0.046) (0.041) (0.033) (0.030) (0.024) (0.019) (0.018) (0.012)
0,46 0,43 0,42 0,37 0,34 0,32 0,28 0,26 0,23 0,22 0,20 0,17 0,17 0,17 0,16 0,10
1
(0.018) (0.017) (0.017) (0.015) (0.013) (0.013) (0.011) (0.010) (0.009) (0.009) (0.008) (0.007) (0.007) (0.007) (0.006) (0.004)
0,43 0,40 0,40 0,34 0,31 0,30 0,26 0,25 0,21 0,20 0,18 0,17 0,15 0,14 0,13 0,08
2
(0.017) (0.016) (0.016) (0.013) (0.012) (0.012) (0.010) (0.010) (0.008) (0.008) (0.007) (0.007) (0.006) (0.006) (0.005) (0.003)
0,35 0,33 0,32 0,28 0,24 0,24 0,21 0,18 0,17 0,15 0,15 0,14 0,11 0,11 0,10 0,07
3
(0.014) (0.013) (0.013) (0.011) (0.009) (0.009) (0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.004) (0.004) (0.004) (0.003)
0,30 0,26 0,26 0,23 0,21 0,19 0,16 0,15 0,15 0,13 0,13 0,10 0,09 0,07 0,07 0,06
4
(0.012) (0.010) (0.010) (0.009) (0.008) (0.007) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003) (0.003) (0.002)
0,26 0,22 0,22 0,21 0,18 0,17 0,14 0,13 0,12 0,10 0,11 0,09 0,08
5 – – –
(0.010) (0.009) (0.009) (0.008) (0.007) (0.007) (0.006) (0.005) (0.005) (0.004) (0.004) (0.004) (0.003)
0,22 0,20 0,20 0,19 0,15 0,15 0,13 0,12 0,11 0,09 0,08 0,08
6 – – – –
(0.009) (0.008) (0.008) (0.007) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003) (0.003)
MDT
0,20 0,18 0,17 0,16 0,14 0,14 0,12 0,11 0,10 0,08
7 – – – – – –
(0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.005) (0.004) (0.004) (0.003)
0,19 0,17 0,16 0,15 0,13 0,13 0,11 0,10 0,08 0,08
8 – – – – – –
(0.007) (0.007) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003) (0.003)
0,18 0,16 0,16 0,14 0,12 0,12 0,10 0,10
9 – – – – – – – –
(0.007) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004)
0,16 0,15 0,15 0,13 0,12 0,11 0,10 0,08
10 – – – – – – – –
(0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003)
0,15 0,14 0,14 0,12 0,11 0,10 0,09
11 – – – – – – – – –
(0.006) (0.006) (0.006) (0.005) (0.004) (0.004) (0.004)
0,15 0,14 0,14 0,12 0,10 0,08 0,08
Mini-Shaft™
12 – – – – – – – – –
(0.006) (0.006) (0.006) (0.005) (0.004) (0.003) (0.003)
0,14 0,13 0,12 0,11 0,10
13 – – – – – – – – – – –
(0.006) (0.005) (0.005) (0.004) (0.004)
0,13 0,12 0,10 0,10 0,08
14 – – – – – – – – – – –
(0.005) (0.005) (0.004) (0.004) (0.003)
0,12 0,12
15 – – – – – – – – – – – – – –
(0.005) (0.005)
0,10 0,10
16 – – – – – – – – – – – – – –
(0.004) (0.004)
Ph = Lead
Thread milling
Thread tapping
Annex
23
www.secotools.com
Thread turning
External/Internal Whitworth threads, metric (Inch)
TPI 4.0 4.5 5 6 7 8 9 10 11 12 14 16 18 19 20 26 28

Thread turning
4,29 3,82 3,44 2,90 2,50 2,17 1,93 1,76 1,58 1,45 1,20 1,13 1,01 0,96 0,92 0,72 0,69
ap
(0.169) (0.150) (0.135) (0.114) (0.098) (0.085) (0.076) (0.069) (0.062) (0.057) (0.047) (0.044) (0.040) (0.038) (0.036) (0.028) (0.027)
0,49 0,46 0,45 0,38 0,37 0,32 0,30 0,29 0,28 0,28 0,24 0,24 0,23 0,22 0,21 0,19 0,18
1
(0.019) (0.018) (0.018) (0.015) (0.015) (0.013) (0.012) (0.069) (0.011) (0.011) (0.009) (0.009) (0.009) (0.0090) (0.008) (0.007) (0.007)
0,46 0,43 0,43 0,36 0,35 0,30 0,28 0,27 0,26 0,26 0,22 0,22 0,22 0,22 0,21 0,18 0,17
2
(0.018) (0.017) (0.017) (0.014) (0.014) (0.012) (0.011) (0.011) (0.010) (0.010) (0.009) (0.009) (0.009) (0.009) (0.008) (0.007) (0.007)
0,38 0,38 0,38 0,30 0,29 0,24 0,23 0,22 0,22 0,22 0,18 0,19 0,19 0,18 0,17 0,15 0,14
3
(0.015) (0.015) (0.015) (0.012) (0.011) (0.009) (0.009) (0.009) (0.009) (0.009) (0.007) (0.007) (0.007) (0.007) (0.007) (0.006) (0.006)
0,36 0,33 0,32 0,26 0,25 0,21 0,20 0,19 0,19 0,18 0,15 0,16 0,16 0,14 0,14 0,12 0,12
4
(0.014) (0.013) (0.013) (0.010) (0.010) (0.008) (0.008) (0.007) (0.007) (0.007) (0.006) (0.006) (0.006) (0.006) (0.006) (0.005) (0.005)
0,34 0,29 0,28 0,22 0,22 0,19 0,18 0,17 0,16 0,16 0,13 0,13 0,13 0,12 0,11 0,08 0,08
5
(0.013) (0.011) (0.011) (0.009) (0.009 (0.007) (0.007) (0.007) (0.006) (0.006) (0.005) (0.005) (0.005) (0.005) (0.004) (0.003) (0.003)
0,31 0,25 0,25 0,21 0,19 0,17 0,15 0,15 0,14 0,14 0,11 0,11 0,08 0,08 0,08
6 – –
(0.012) (0.010) (0.010) (0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.006) (0.004) (0.004) (0.003) (0.003) (0.003)
MDT
0,29 0,24 0,22 0,19 0,18 0,15 0,14 0,14 0,13 0,13 0,09 0,08
7 – – – – –
(0.011) (0.009) (0.009) (0.007) (0.007) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.003)
0,27 0,22 0,20 0,17 0,16 0,14 0,13 0,13 0,12 0,08 0,08
8 – – – – – –
(0.011) (0.009) (0.008) (0.007) (0.006) (0.006) (0.005) (0.005) (0.005) (0.003) (0.003)
0,24 0,20 0,19 0,16 0,15 0,13 0,12 0,12 0,08
9 – – – – – – – –
(0.009) (0.008) (0.007) (0.006) (0.006) (0.005) (0.005) (0.005) (0.003)
0,22 0,18 0,18 0,15 0,14 0,12 0,12 0,08
10 – – – – – – – – –
(0.009) (0.007) (0.007) (0.006) (0.006) (0.005) (0.005) (0.003)
0,20 0,17 0,17 0,14 0,12 0,12 0,08
11 – – – – – – – – – –
(0.008) (0.007) (0.007) (0.006) (0.005) (0.005) (0.003)
0,19 0,16 0,15 0,14 0,08 0,08
Mini-Shaft™
12 – – – – – – – – – – –
(0.007) (0.006) (0.006) (0.006) (0.003) (0.003)
0,17 0,15 0,12 0,12
13 – – – – – – – – – – – – –
(0.007) (0.006) (0.005) (0.005)
0,15 0,14 0,10 0,10
14 – – – – – – – – – – – – –
(0.006) (0.006) (0.004) (0.004)
0,12 0,12
15 – – – – – – – – – – – – – – –
(0.005) (0.005)
0,10 0,10
16 – – – – – – – – – – – – – – –
(0.004) (0.004)
Ph = Lead
Thread milling

Thread tapping
Annex
24
www.secotools.com
Thread turning
External UN threads, metric (Inch)
TPI 4.0 4.5 5 6 7 8 9 10 11 12 13 14 16 18 20 24 28 32
Thread turning
4,07 3,62 3,29 2,71 2,33 2,08 1,84 1,66 1,52 1,39 1,29 1,19 1,05 0,94 0,84 0,70 0,60 0,53
ap
(0.160) (0.143) (0.130) (0.107) (0.092) (0.082) (0.072) (0.065) (0.060) (0.055) (0.051) (0.047) (0.041) (0.037) (0.033) (0.028) (0.024) (0.021)
0,47 0,45 0,43 0,36 0,35 0,30 0,28 0,27 0,27 0,27 0,25 0,23 0,22 0,23 0,20 0,19 0,17 0,17
1
(0.019) (0.018) (0.017) (0.014) (0.014) (0.012) (0.011) (0.011) (0.011) (0.011) (0.010) (0.009) (0.009) (0.009) (0.008) (0.007) (0.007) (0.007)
0,44 0,41 0,40 0,34 0,33 0,28 0,26 0,26 0,25 0,26 0,24 0,22 0,21 0,21 0,19 0,17 0,15 0,15
2
(0.017) (0.016) (0.016) (0.013) (0.013) (0.011) (0.010) (0.010) (0.010) (0.010) (0.009) (0.009) (0.008) (0.008) (0.007) (0.007) (0.006) (0.006)
0,40 0,39 0,36 0,27 0,26 0,25 0,21 0,20 0,20 0,20 0,18 0,17 0,16 0,16 0,15 0,14 0,11 0,13
3
(0.016) (0.015) (0.014) (0.011) (0.010) (0.010) (0.008) (0.008) (0.008) (0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.006) (0.004) (0.005)
0,36 0,31 0,31 0,23 0,22 0,21 0,20 0,17 0,19 0,18 0,17 0,15 0,14 0,14 0,12 0,12 0,09 0,08
4
(0.014) (0.012) (0.012) (0.009) (0.009) (0.008) (0.008) (0.007) (0.007) (0.007) (0.007) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.003)
0,32 0,26 0,26 0,22 0,21 0,18 0,17 0,16 0,16 0,15 0,14 0,13 0,13 0,12 0,10 0,08 0,08
5 –
(0.013) (0.010) (0.010) (0.009) (0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.006) (0.005) (0.005) (0.005) (0.004) (0.003) (0.003)
0,27 0,23 0,23 0,20 0,19 0,16 0,15 0,15 0,14 0,13 0,12 0,11 0,11 0,08 0,08
6 – – –
(0.011) (0.009) (0.009) (0.008) (0.007) (0.006) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003) (0.003)
MDT
0,25 0,21 0,20 0,18 0,17 0,14 0,14 0,14 0,12 0,12 0,11 0,10 0,08
7 – – – – –
(0.010) (0.008) (0.008) (0.007) (0.007) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003)
0,23 0,20 0,19 0,16 0,15 0,13 0,12 0,12 0,11 0,08 0,08 0,08
8 – – – – – –
(0.009) (0.008) (0.007) (0.006) (0.006) (0.005) (0.005) (0.005) (0.004) (0.003) (0.003) (0.003)
0,22 0,18 0,19 0,15 0,14 0,12 0,12 0,11 0,08
9 – – – – – – – – –
(0.009) (0.007) (0.007) (0.006) (0.006) (0.005) (0.005) (0.004) (0.003)
0,21 0,17 0,18 0,14 0,12 0,12 0,11 0,08
10 – – – – – – – – – –
(0.008) (0.007) (0.007) (0.006) (0.005) (0.005) (0.004) (0.003)
0,19 0,16 0,17 0,13 0,11 0,11 0,08
11 – – – – – – – – – – –
(0.007) (0.006) (0.007) (0.005) (0.004) (0.004) (0.003)
0,18 0,15 0,15 0,12 0,08 0,08
Mini-Shaft™
12 – – – – – – – – – – – –
(0.007) (0.006) (0.006) (0.005) (0.003) (0.003)
0,16 0,14 0,12 0,11
13 – – – – – – – – – – – – – –
(0.006) (0.006) (0.005) (0.004)
0,15 0,14 0,10 0,10
14 – – – – – – – – – – – – – –
(0.006) (0.006) (0.004) (0.004)
0,12 0,12
15 – – – – – – – – – – – – – – – –
(0.005) (0.005)
0,10 0,10
16 – – – – – – – – – – – – – – – –
(0.004) (0.004)
Ph = Lead
Thread milling
Thread tapping
Annex
25
www.secotools.com
Thread turning
Internal UN threads, metric (Inch)
TPI 4 4.5 5 6 7 8 9 10 11 12 13 14 16 18 20 24 28 32
Thread turning
3,74 3,32 2,99 2,46 2,13 1,88 1,66 1,49 1,36 1,25 1,14 1,06 0,93 0,84 0,76 0,64 0,56 0,49
ap
(0.147) (0.131) (0.118) (0.097) (0.084) (0.074) (0.065) (0.059) (0.054) (0.049) (0.045) (0.042) (0.037) (0.033) (0.030) (0.025) (0.022) (0.019)
0,44 0,41 0,42 0,35 0,34 0,30 0,28 0,27 0,27 0,27 0,25 0,23 0,22 0,23 0,20 0,18 0,17 0,17
1
(0.017) (0.016) (0.017) (0.014) (0.013) (0.012) (0.011) (0.011) (0.011) (0.011) (0.010) (0.009) (0.009) (0.009) (0.008) (0.007) (0.007) (0.007)
0,41 0,38 0,38 0,33 0,32 0,28 0,26 0,25 0,23 0,23 0,20 0,18 0,18 0,17 0,16 0,15 0,14 0,14
2
(0.016) (0.015) (0.015) (0.013) (0.013) (0.011) (0.010) (0.010) (0.009) (0.009) (0.008) (0.007) (0.007) (0.007) (0.006) (0.006) (0.006) (0.006
0,39 0,34 0,33 0,25 0,24 0,22 0,19 0,18 0,18 0,18 0,15 0,14 0,14 0,14 0,13 0,13 0,09 0,10
3
(0.015) (0.013) (0.013) (0.010) (0.009) (0.009) (0.007) (0.007) (0.007) (0.007) (0.006) (0.006) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004)
0,33 0,28 0,27 0,21 0,21 0,18 0,16 0,15 0,15 0,15 0,13 0,13 0,12 0,12 0,10 0,10 0,08 0,08
4
(0.013) (0.011) (0.011) (0.008) (0.008) (0.007) (0.006) (0.006) (0.006) (0.006) (0.005) (0.005) (0.005) (0.005) (0.004) (0.004) (0.003) (0.003)
0,28 0,23 0,23 0,18 0,17 0,15 0,14 0,13 0,13 0,13 0,12 0,11 0,10 0,10 0,09 0,08 0,08
5 –
(0.011) (0.009) (0.009) (0.007) (0.007) (0.006) (0.006) (0.005) (0.005) (0.005) (0.005) (0.004) (0.004) (0.004) (0.004) (0.003) (0.003)
0,24 0,20 0,20 0,16 0,15 0,13 0,13 0,12 0,11 0,11 0,11 0,10 0,09 0,08 0,08
6 – – –
(0.009) (0.008) (0.008) (0.006) (0.006) (0.005) (0.005) (0.005) (0.004) (0.004) (0.004) (0.004) (0.004) (0.003) (0.003)
MDT
0,22 0,19 0,18 0,15 0,14 0,12 0,12 0,11 0,11 0,10 0,10 0,09 0,08
7 – – – – –
(0.009) (0.007) (0.007) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.004) (0.004) (0.004) (0.003)
0,21 0,18 0,17 0,14 0,13 0,11 0,11 0,10 0,10 0,08 0,08 0,08
8 – – – – – –
(0.008) (0.007) (0.007) (0.006) (0.005) (0.004) (0.004) (0.004) (0.004) (0.003) (0.003) (0.003)
0,20 0,17 0,16 0,13 0,12 0,11 0,10 0,10 0,08
9 – – – – – – – – –
(0.008) (0.007) (0.006) (0.005) (0.005) (0.004) (0.004) (0.004) (0.003)
0,18 0,16 0,15 0,12 0,12 0,10 0,09 0,08
10 – – – – – – – – – –
(0.007) (0.006) (0.006) (0.005) (0.005) (0.004) (0.004) (0.003)
0,17 0,15 0,14 0,12 0,11 0,10 0,08
11 – – – – – – – – – – –
(0.007) (0.006) (0.006) (0.005) (0.004) (0.004) (0.003)
0,16 0,14 0,14 0,11 0,08 0,08
Mini-Shaft™
12 – – – – – – – – – – – –
(0.006) (0.006) (0.006) (0.004) (0.003) (0.003)
0,15 0,14 0,12 0,11
13 – – – – – – – – – – – – – –
(0.006) (0.006) (0.005) (0.004)
0,14 0,13 0,10 0,10
14 – – – – – – – – – – – – – –
(0.006) (0.005) (0.004) (0.004)
0,12 0,12
15 – – – – – – – – – – – – – – – –
(0.005) (0.005)
0,10 0,10
16 – – – – – – – – – – – – – – – –
(0.004) (0.004)
External multi-tooth inserts, metric (Inch)

Thread milling
ISO Metric UN Whitworth NPT
Type 3M 2M 3M 2M 3M 2M 2M 3M 2M 3M 2M 2M 2M 3M 2M
Ph mm 1,0 1,5 1,5 2,0 2,0 3,0 – – – – – – – – –
TPI – – – – – – 16 16 12 12 8 11 11,5 11,5 8
ap mm 0,65 0,93 0,93 1,25 1,25 1,92 1,05 1,05 1,39 1,39 2,08 1,58 1,76 1,76 2,54
(inch) (0.026) (0.037) (0.037) (0.049) (0.049) (0.076) (0.041) (0.041) (0.055) (0.055) (0.082) (0.062) (0.069) (0.069) (0.100)
Pass 1 mm 0,36 0,43 0,56 0,57 0,75 0,65 0,49 0,64 0,64 0,84 0,70 0,73 0,59 0,81 0,88
(inch) (0.026) (0.017) (0.022) (0.022) (0.030) (0.026) (0.019) (0.025) (0.025) (0.033) (0.028) (0.029) (0.023) (0.032) (0.035)
0,29 0,30 0,37 0,40 0,50 0,53 0,33 0,41 0,44 0,55 0,57 0,50 0,50 0,57 0,64
Thread tapping
2
(0.011) (0.012) (0.015) (0.016) (0.020) (0.021) (0.013) (0.016) (0.017) (0.022) (0.022) (0.020) (0.020) (0.022) (0.025)
0,20 0,28 0,42 0,23 0,31 0,46 0,35 0,37 0,38 0,57
3 – – – – –
(0.008) (0.011) (0.017) (0.009) (0.012) (0.018) (0.014) (0.015) (0.015) (0.022)
0,32 0,35 0,30 0,45
4 – – – – – – – – – – –
(0.013) (0.014) (0.012) (0.018)
Ph = Lead
Annex
26
www.secotools.com
Thread turning
Internal multi-tooth inserts, metric (Inch)

ISO Metric UN Whitworth NPT
Type 3M 2M 3M 2M 3M 2M 2M 3M 2M 3M 2M 2M 2M 3M 2M
Thread turning
Ph mm 1,0 1,5 1,5 2,0 2,0 3,0 – – – – – – – – –
TPI – – – – – – 16 16 12 12 8 11 11,5 11,5 8
ap mm 0,60 0,85 0,85 1,17 1,17 1,78 0,93 0,93 1,25 1,25 1,88 1,58 1,76 1,76 2,54
(inch) (0.024) (0.033) (0.033) (0.046) (0.046) (0.070) (0.037) (0.037) (0.049) (0.049) (0.074) (0.062) (0.069) (0.069) (0.100)
Pass 1 mm 0,33 0,38 0,51 0,51 0,70 0,55 0,42 0,56 0,56 0,75 0,58 0,73 0,59 0,81 0,88
(inch) (0.013) (0.015) (0.020) (0.020) (0.028) (0.022) (0.017) (0.022) (0.022) (0.030) (0.023) (0.029) (0.023) (0.032) (0.035)
0,27 0,27 0,34 0,38 0,47 0,49 0,30 0,37 0,40 0,50 0,51 0,50 0,50 0,57 0,64
2
(0.011) (0.011) (0.013) (0.015) (0.019) (0.019) (0.017) (0.015) (0.016) (0.020) (0.020) (0.020) (0.020) (0.022) (0.025)
0,20 0,28 0,42 0,21 0,29 0,44 0,35 0,37 0,38 0,57
3 – – – – –
(0.008) (0.011) (0.017) (0.008) (0.011) (0.017) (0.014) (0.015) (0.015) (0.022)
0,32 0,35 0,30 0,45
MDT
4 – – – – – – – – – – –
(0.013) (0.014) (0.012) (0.018)
External/Internal NPT threads, metric (Inch)
TPI 8 11,5 14 18 27
2,54 1,76 1,45 1,12 0,75

ap
(0.100) (0.069) (0.057) (0.044) (0.030)
0,28 0,25 0,24 0,22 0,19
1
(0.011) (0.010) (0.009) (0.009) (0.007)
0,25 0,22 0,22 0,18 0,15
2
(0.010) (0.009 (0.009) (0.007) (0.006)
Mini-Shaft™
0,22 0,18 0,17 0,15 0,13
3
(0.009) (0.007) (0.007) (0.006) (0.005)
0,19 0,16 0,15 0,14 0,11
4
(0.007) (0.006) (0.006) (0.006) (0.004)
0,18 0,16 0,14 0,13 0,09
5
(0.007) (0.006) (0.006) (0.005) (0.004)
0,18 0,14 0,13 0,12 0,08
6
(0.007) (0.006) (0.005) (0.005) (0.003)
0,17 0,14 0,12 0,10
7 –
(0.007) (0.006) (0.005) (0.004)
0,17 0,12 0,10 0,08
8 –
(0.007) (0.005) (0.004) (0.003)
0,16 0,12 0,10
9 – –
(0.006) (0.005) (0.004)
Thread milling
0,16 0,10 0,08
10 – –
(0.006) (0.004) (0.003)
0,14 0,09
11 – – –
(0.006) (0.004)
0,13 0,08
12 – – –
(0.005) (0.003)
0,12
13 – – – –
(0.005)
0,11
14 – – – –
(0.004)
0,08
15 – – – –
(0.003)
Ph = Lead
Thread tapping

Annex
27
www.secotools.com
Thread turning
External Round DIN 405, metric (Inch)
TPI 4 6 8 10
3,43 2,23 1,73 1,40

Thread turning
ap
(0.135) (0.088) (0.068) (0.055)
0,44 0,33 0,29 0,26
1
(0.017) (0.013) (0.011) (0.010)
0,40 0,29 0,26 0,25
2
(0.016) (0.011) (0.010) (0.010)
0,34 0,25 0,21 0,23
3
(0.013) (0.010) (0.008) (0.009)
0,32 0,23 0,19 0,20
4
(0.013) (0.009) (0.007) (0.008)
0,28 0,20 0,18 0,16
5
(0.011) (0.008) (0.007) (0.006)
0,26 0,18 0,16 0,12
6
(0.010) (0.007) (0.006) (0.005)
0,24 0,16 0,14 0,10
7
(0.009) (0.006) (0.006) (0.004)
0,22 0,15 0,12 0,08
MDT
8
(0.009) (0.006) (0.005) (0.003)
0,20 0,14 0,10
9 –
(0.008) (0.006) (0.004)
0,19 0,12 0,08
10 –
(0.007) (0.005) (0.003)
0,17 0,10
11 – –
(0.007) (0.004)
0,15 0,08
12 – –
(0.006) (0.003)
0,12
13 – – –
(0.005)
0,10
14 – – –
Mini-Shaft™
(0.004)
Internal Round DIN 405, metric (Inch)
TPI 4 6 8 10
3,59 2,44 1,66 1,49

ap
(0.141) (0.096) (0.065) (0.059)
0,46 0,38 0,26 027
1
(0.018) (0.015) (0.010) (0.011)
0,43 0,34 0,22 0,26
2
(0.017) (0.013) (0.009) (0.010)
0,40 0,30 0,21 0,25
3
(0.016) (0.012) (0.009) (0.010)
Thread milling
0,35 0,25 0,19 0,22

4
(0.014) (0.010) (0.007) (0.009)
0,30 0,21 0,18 0,18
5
(0.012) (0.008) (0.007) (0.007)
0,26 0,19 0,16 0,13
6
(0.010) (0.007) (0.006) (0.005)
0,24 0,17 0,14 0,10
7
(0.009) (0.007) (0.006) (0.004)
0,22 0,16 0,12 0,08
8
(0.009) (0.006) (0.005) (0.003)
0,20 0,14 0,10
9 –
(0.008) (0.006) (0.004)
0,19 0,12 0,08
10 –
(0.007) (0.005) (0.003)
Thread tapping
0,17 0,10
11 – –
(0.007) (0.004)
0,15 0,08
12 – –
(0.006) (0.003)
0,12
13 – – –
(0.005)
0,10
14 – – –
(0.004)
Ph = Lead
Annex
28
www.secotools.com
Thread turning
External TR thread, metric
Ph 14.0 12.0 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.5
Thread turning
ap 8,2 6,72 5,7 5,16 4,68 4,17 3,66 2,89 2,38 1,83 1,33 0,97
1 0,40 0,38 0,38 0,38 0,37 0,37 0,37 0,34 0,31 0,27 0,25 0,23
2 0,37 0,36 0,36 0,35 0,35 0,34 0,35 0,33 0,28 0,25 0,24 0,22
3 0,36 0,34 0,34 0,34 0,34 0,33 0,32 0,27 0,24 0,21 0,20 0,18
4 0,36 0,34 0,34 0,33 0,33 0,31 0,29 0,25 0,20 0,17 0,17 0,14
5 0,35 0,32 0,32 0,31 0,31 0,29 0,27 0,23 0,19 0,15 0,14 0,12
6 0,35 0,32 0,32 0,30 0,29 0,26 0,25 0,21 0,18 0,13 0,13 0,08
7 0,34 0,30 0,31 0,29 0,28 0,26 0,23 0,20 0,16 0,13 0,11 –
8 0,34 0,30 0,29 0,28 0,27 0,26 0,22 0,20 0,15 0,12 0,09 –
9 0,34 0,30 0,28 0,26 0,25 0,24 0,22 0,18 0,15 0,12 – –
MDT
10 0,33 0,29 0,27 0,25 0,24 0,23 0,20 0,16 0,15 0,10 – –
11 0,33 0,29 0,25 0,24 0,23 0,22 0,18 0,15 0,14 0,10 – –
12 0,32 0,29 0,24 0,23 0,21 0,22 0,17 0,14 0,13 0,08 – –
13 0,32 0,28 0,23 0,22 0,20 0,20 0,17 0,13 0,10 – – –
14 0,31 0,27 0,22 0,21 0,19 0,19 0,16 0,10 – – – –
15 0,31 0,25 0,22 0,21 0,19 0,17 0,14 – – – – –
16 0,30 0,25 0,20 0,19 0,18 0,16 0,12 – – – – –
Mini-Shaft™
17 0,30 0,24 0,19 0,18 0,17 0,12 – – – – – –
18 0,29 0,22 0,18 0,16 0,15 – – – – – – –
19 0,28 0,20 0,17 0,15 0,13 – – – – – – –
20 0,27 0,20 0,16 0,15 – – – – – – – –
21 0,23 0,19 0,15 0,13 – – – – – – – –
22 0,23 0,18 0,15 – – – – – – – – –
23 0,21 0,17 0,13 – – – – – – – – –
24 0,19 0,16 – – – – – – – – – –
25 0,17 0,15 – – – – – – – – – –
Thread milling
26 0,16 0,13 – – – – – – – – – –
27 0,16 – – – – – – – – – – –
28 0,15 – – – – – – – – – – –
29 0,13 – – – – – – – – – – –
Ph = Lead
Thread tapping
Annex
29
www.secotools.com
Thread turning
Internal TR threads, metric
Ph 14.0 12.0 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.5
Thread turning
ap 8,47 6,71 5,7 5,19 4,68 4,17 3,65 2,89 2,38 1,85 1,34 0,98
1 0,40 0,38 0,38 0,38 0,37 0,37 0,37 0,34 0,31 0,27 0,25 0,23
2 0,37 0,36 0,36 0,35 0,35 0,34 0,34 0,33 0,28 0,25 0,24 0,22
3 0,36 0,34 0,34 0,34 0,34 0,33 0,32 0,27 0,24 0,22 0,21 0,19
4 0,36 0,34 0,34 0,33 0,33 0,31 0,29 0,25 0,20 0,17 0,17 0,14
5 0,35 0,32 0,32 0,31 0,31 0,29 0,27 0,23 0,19 0,15 0,14 0,12
6 0,35 0,32 0,32 0,31 0,29 0,26 0,25 0,21 0,18 0,14 0,13 0,08
7 0,34 0,30 0,31 0,29 0,28 0,26 0,23 0,20 0,16 0,13 0,11 –
8 0,34 0,30 0,29 0,29 0,27 0,26 0,22 0,20 0,15 0,12 0,09 –
9 0,34 0,30 0,28 0,26 0,25 0,24 0,22 0,18 0,15 0,12 – –
MDT
10 0,33 0,29 0,27 0,25 0,24 0,23 0,20 0,16 0,15 0,10 – –
11 0,33 0,29 0,25 0,24 0,23 0,22 0,18 0,15 0,14 0,10 – –
12 0,32 0,28 0,24 0,23 0,21 0,22 0,17 0,14 0,13 0,08 – –
13 0,32 0,28 0,23 0,22 0,20 0,20 0,17 0,13 0,10 – – –
14 0,31 0,27 0,22 0,21 0,19 0,19 0,16 0,10 – – – –
15 0,31 0,25 0,22 0,21 0,19 0,17 0,14 – – – – –
16 0,30 0,25 0,20 0,19 0,18 0,16 0,12 – – – – –

Mini-Shaft™
17 0,30 0,24 0,19 0,18 0,17 0,12 – – – – – –
18 0,29 0,22 0,18 0,16 0,15 – – – – – – –
19 0,28 0,20 0,17 0,15 0,13 – – – – – – –
20 0,27 0,20 0,16 0,15 – – – – – – – –
21 0,23 0,19 0,15 0,13 – – – – – – – –
22 0,23 0,18 0,15 – – – – – – – – –
23 0,21 0,17 0,13 – – – – – – – – –
24 0,19 0,16 – – – – – – – – – –
25 0,17 0,15 – – – – – – – – – –
Thread milling
26 0,16 0,13 – – – – – – – – – –
27 0,16 – – – – – – – – – – –
28 0,15 – – – – – – – – – – –
29 0,13 – – – – – – – – – – –
30 0,13 – – – – – – – – – – –
Ph = Lead
Thread tapping
Annex
30
www.secotools.com
Thread turning
External ACME, Inch
TPI 2 3 4 5 6 8 10 12 14 16
Thread turning
ap 0.265 0.18 0.138 0.112 0.095 0.074 0.063 0.050 0.041 0.039
1 0.028 0.019 0.013 0.012 0.011 0.010 0.010 0.009 0.008 0.009
2 0.026 0.018 0.012 0.011 0.011 0.010 0.009 0.009 0.008 0.009
3 0.023 0.016 0.011 0.010 0.010 0.009 0.009 0.007 0.007 0.007
4 0.022 0.015 0.011 0.01 0.009 0.007 0.007 0.007 0.006 0.006
5 0.019 0.013 0.010 0.009 0.008 0.006 0.006 0.005 0.005 0.005
6 0.017 0.011 0.010 0.008 0.007 0.005 0.005 0.005 0.004 0.003
7 0.015 0.011 0.009 0.007 0.006 0.005 0.005 0.004 0.003 –
8 0.013 0.009 0.008 0.007 0.006 0.005 0.004 0.004 – –
9 0.013 0.009 0.008 0.007 0.006 0.005 0.004 – – –
MDT
10 0.011 0.009 0.007 0.006 0.006 0.004 0.004 – – –
11 0.011 0.008 0.007 0.006 0.006 0.004 – – – –
12 0.01 0.007 0.006 0.006 0.005 0.004 – – – –
13 0.009 0.007 0.006 0.005 0.004 – – – – –
14 0.009 0.007 0.006 0.004 – – – – – –
15 0.008 0.006 0.006 0.004 – – – – – –
16 0.007 0.005 0.004 – – – – – – –
Mini-Shaft™
17 0.007 0.005 0.004 – – – – – – –
18 0.006 0.005 – – – – – – – –
19 0.006 – – – – – – – – –
20 0.005 – – – – – – – – –
Internal ACME, Inch
TPI 2 3 4 5 6 8 10 12 14 16
ap 0.265 0.182 0.142 0.114 0.098 0.078 0.065 0.049 0.042 0.040
1 0.028 0.020 0.013 0.012 0.012 0.011 0.010 0.009 0.009 0.009
Thread milling
2 0.026 0.018 0.012 0.012 0.011 0.011 0.010 0.009 0.008 0.009
3 0.023 0.016 0.012 0.011 0.011 0.009 0.009 0.007 0.007 0.008
4 0.022 0.015 0.011 0.010 0.009 0.007 0.007 0.006 0.006 0.006
5 0.019 0.013 0.011 0.009 0.008 0.006 0.006 0.005 0.005 0.005
6 0.017 0.011 0.010 0.008 0.007 0.006 0.006 0.005 0.004 0.003
7 0.015 0.011 0.009 0.007 0.007 0.005 0.005 0.004 0.003 –
8 0.013 0.009 0.008 0.007 0.006 0.005 0.004 0.004 – –
9 0.013 0.009 0.008 0.007 0.006 0.005 0.004 – – –

Thread tapping
10 0.011 0.009 0.007 0.006 0.006 0.005 0.004 – – –
11 0.011 0.008 0.007 0.006 0.006 0.004 – – – –
12 0.010 0.007 0.006 0.006 0.005 0.004 – – – –
13 0.009 0.007 0.006 0.005 0.004 – – – – –
14 0.009 0.007 0.006 0.004 – – – – – –
15 0.008 0.006 0.006 0.004 – – – – – –
16 0.007 0.005 0.005 – – – – – – –
17 0.007 0.005 0.005 – – – – – – –
18 0.006 0.005 – – – – – – – –
19 0.006 – – – – – – – – –
Annex
20 0.005 – – – – – – – – –
Ph = Lead
31
www.secotools.com
Thread turning
Multi-tooth insert TWIN THREADER, TT

External 60° threads, metric (Inch)
Ph mm 2.0 1.5 1.0
Thread turning
ap mm 1,25 0,93 0,65

(inch) (0.049) (0.037) (0.026)
Pass 1 mm 0,25 0,22 0,22
(inch) (0.010) (0.009) (0.009)
0,36 0,31 0,25
2
(0.014) (0.012) (0.010)
0,25 0,22 0,18
3
(0.010) (0.009) (0.007)
0,21 0,18
4 –
(0.008) (0.007)
0,18
5 – –
(0.007)
Internal 60° threads, metric (Inch)

Ph mm 2.0 1.5 1.0
MDT
ap mm 1,17 0,85 0,60

(inch) (0.046) (0.033) (0.024)
Pass 1 mm 0,23 0,20 0,19
(inch) (0.009) (0.008) (0.007)
0,34 0,27 0,23
2
(0.013) (0.011) (0.009)
0,23 0,20 0,18
3
(0.009) (0.008) (0.007)
0,19 0,18
4 –
(0.007) (0.007)
0,18
5 – –
(0.007)
Mini-Shaft™
External and internal Whitworth and BSPT threads, metric (Inch)

TPI 11 14
ap mm 1,58 1,20
(inch) (0.062) (0.047)
Pass 1 mm 0,26 0,22
(inch) (0.010) (0.009)
0,38 0,35
2
(0.015) (0.014)
0,27 0,24
3
(0.011) (0.009)
0,25 0,21
Thread milling
4
(0.010) (0.008)
0,22 0,18
5
(0.009) (0.007)
0,20
6 –
(0.008)
Ph = Lead
Thread tapping
Annex
32
www.secotools.com
Thread turning
External UN threads, metric (Inch)

TPI 12 16
ap mm 1,39 1,05
Thread turning
(inch) (0.055) (0.041)
Pass 1 mm 0,28 0,25
(inch) (0.011) (0.010)
0,38 0,36
2
(0.015) (0.014)
0,28 0,26
3
(0.011) (0.010)
0,25 0,18
4
(0.010) (0.007)
0,20
5 –
(0.008)
Internal UN threads, metric (Inch)

TPI 12 16
ap mm 1,25 0,93
MDT
(inch) (0.049) (0.037)
Pass 1 mm 0,24 0,21
(inch) (0.009) (0.008)
0,35 0,32
2
(0.014) (0.013)
0,25 0,22
3
(0.010) (0.009)
0,22 0,18
4
(0.009) (0.007)
0,19
5 –
(0.007)
Mini-Shaft™
Ph = Lead
Thread milling
Thread tapping
Annex
33
www.secotools.com
Thread turning
Infeed method
The choice of infeed method is most important for long chipping materials to ensure good chip control.
Thread turning
Modified flank infeed Flank infeed
For CNC machines and conventional machines For CNC machines and conventional machines
MDT
First choice for CNC machines Choose flank infeed when modified flank infeed cannot be used
The infeed angle should be 2,5–5% less than the flank angle
• Good chip control (important for internal threading) • Good chip control
• Good surface finish on thread • Can result in bad surface on thread
• Long tool life • Not suitable for work hardening materials
Mini-Shaft™
Radial infeed Alternate flank infeed
For conventional machines and multi-tooth inserts For CNC machines

Thread milling
Multitooth inserts demand radial infeed First choice for large coarse threads
First choice for work hardening materials
Thread tapping
• Difficult to control the chip • Long tool life

• High cutting forces • Chipbreaking problems can arise
Annex
34
www.secotools.com
Thread turning
Nomenclature and formula

RPM RPM
Thread turning
3.82
(rev/min) D (rev/min)
Cutting speed Cutting speed
(m/min) 0.262 . D . n (sf/min)
Slide velocity/feed rate Slide velocity/feed rate
Sv
MDT
(mm/min) (in/min)
Lead Lead
Ph = P · numbers of starts (mm) Ph = P · numbers of starts (inch)
Helix angle Helix angle
Mini-Shaft™
l = arctan (°) l = arctan (°)
Conversion of P to TPI Conversion Pitch – TPI
P 1
TPI
Dc = Workpiece diameter (mm) D = Workpiece diameter (inch)
Thread milling
D2 = Pitch diameter (mean diameter) (mm) D2 = Pitch diameter (effective diameter) (inch)
n = RPM (rev/min) n = RPM (r/min)
P = Pitch (mm) P = Pitch (inch)
Ph = Lead (mm) Ph = Lead (inch)
vf = Slide velocity (feed rate) (m/min) Sv = Slide velocity (in/min)
TPI = Number of threads per inch TPI = Thread per inch
vc = Cutting speed (mm/min) vc = Cutting speed (sf/min)
l = Helix angle (°) l = Helix angle (°)
Thread tapping
Annex
35
www.secotools.com
Thread turning
Toolholder modification to thread small ID

Thread turning
It is often necessary to cut internal threads which are too small to be made with a On demand, these internal toolholders can also be supplied as special design.
standard toolholder.
For some holders it is possible to work inside smaller bores than indicated by the
Several standard internal toolholders can be modified by a simple reworking so that DCINN2 dimension, here it is necessary ”to back off” the bottom corner of the insert
threads can be cut in approximately 30% smaller bores. (possibly also the insert shim).
This modification work can be made on an lathe with a four-jaw chuck.
In the dimension table DCINN at pages ‘Toolholders Internal’ you will find the
dimensions required for the alteration.
Reference dimensions on insert

MDT
WF and PDY dimensions can be found on the pages for internal toolholders and
threading inserts.
Mini-Shaft™
Reference dimensions on bar

Thread milling
Thread tapping
C = WF – PDY + R – DCINN2 C = Centre-point displacement when modifying the tool.

DCINN = Minimum bore diameter of standard tool.
DCINN2 = Minimum bore diameter with a modified tool.
Annex
36
www.secotools.com
Thread turning
Troubleshooting
Rapid flank wear Insert fracture
Thread turning
• Reduce the cutting speed • Increase the number of passes
• Increase the infeed per pass • Check the workpiece mounting
• Use modified flank infeed • Check the centre height of the cutting edge
• Check that the correct insert shim has been • Check for built-up edge
selected • Select a tougher grade
• Select a more wear-resistant grade
Plastic deformation Vibrations

• Select a grade with better resistance to plastic • Change the cutting speed
deformation • Reduce the overhang and use the most stable
• Reduce the cutting speed toolholder
MDT
• Increase the number of passes • Check the centre height of the cutting edge
• Increase the coolant supply • Check that the workpiece diameter is correct
• Check that the workpiece diameter is correct
prior to cutting the thread
Build-up edge Poor finish

• Increase the cutting speed • Increase the cutting speed
• Do not use coolant • Check that the correct insert shim has been
selected
Mini-Shaft™
• Use modified flank infeed or radial infeed
Edge chipping Poor chip control

• Check the workpiece mounting • Reduce the number of passes
• Check the cutting speed • Increase the cutting speed
• Use modified flank infeed • Use modified flank infeed
• Select a tougher grade • Increase the coolant supply
Thread milling
Optimisation
ISO-P (steel) ISO-M (stainless steel) ISO-K (cast iron)
Resistance to plastic deformation Resistance to plastic deformation Resistance to plastic deformation

Thread tapping
Toughness Wear resistance Toughness Wear resistance Toughness Wear resistance

Annex
37
www.secotools.com
Thread turning
Torque values for clamping screws

Maximum Torque value for each screw is shown below
Thread turning
Screw designation Torque Nm Torque key Screw designation Torque Nm Torque key
110.26-655 10,0 H00T-60100 L84017-T09P 2,0 T00-09P20

117.26-655 5,0 H00T-3050 L85011-T15P 5,0 T00-15P50
117.26-657 3,0 H00-2530 L85012-T15P 5,0 T00-15P50
170.26-655 6,0 H00T-4060 L85017-T09P 2,0 T00-09P20
C02205-T07P 0,9 T00-07P09 L85020-T15P 3,5 T00-15P35
C02505-T07P 0,9 T00-07P09 L85021-T15P 3,5 T00-15P35
C02506-T07P 0,9 T00-07P09 L86015-T20P 6,0 T00T-20P60
C03007-T09P 2,0 T00-09P20 L86025-T20P 6,0 T00T-20P60
C03508-T15P 3,0 T00-15P30 LD1035-T25P 6,0 T00T-25P60
MDT
C03509-T15P 3,0 T00-15P30 LD5020-T09P 2,0 T00-09P20

C03510-T15P 3,0 T00-15P30 LD6020-T15P 3,0 T00-15P30
C03511-T09P 2,0 T00-09P20 LD6021-T09P 2,0 T00-09P20
C03512-T15P 3,0 T00-15P30 LD6024-T20P 3,0 T00-15P30
C04008-T15P 3,5 T00-15P35 LD6025-T15P 3,0 T00-15P30
C04010-T15P 3,5 T00-15P35 LD6026-T09P 2,0 T00-09P20
C04011-T15P 3,5 T00-15P35 LD8025-T25P 6,0 T00T-25P60
C04014-T15P 3,5 T00-15P35 LD8030-T25P 6,0 T00T-25P60
C04512-T15P 5,0 T00-15P50 LS0512 2,5 –
Mini-Shaft™
C04518-T15P 5,0 T00-15P50 LS0613 3,0 H00-2530

C05010-T20P 5,0 T00-20P50 LS0616 3,0 H00-2530
C05012-T15P 5,0 T00-15P50 LS0818 4,0 –
C05013-T20P 5,0 T00-20P50 LS0822 4,0 –
C05018-T20P 5,0 T00-20P50 MC6S4X14 3,5 –
C11804-T06P 0,5 T00-06P05 MC6S4X18 3,5 –
C46017-T20P 6,0 T00T-20P60 MC6S5X14 5,0 H00T-4050
C82204-T06P 0,5 T00-06P05 MC6S5X18 5,0 H00T-4050
CC05 0,9 H00-1509 MN0909L-T09P 2,0 T00-09P20
CC08P-V13 2,0 T00-09P20 MN1215L-T15P 3,0 T00-15P30
Thread milling
CC09P-D11 2,0 T00-09P20 MN1215R-T15P 3,0 T00-15P30

CC12P-S12 3,5 T00-15P35 MN1215S-T15P 3,0 T00-15P30
CC14 6,0 H00T-4060 MN1215T-T15P 3,0 T00-15P30
CC16 10,0 – MN1515-T15P 3,0 T00-15P30
CC17P 10,0 – MN1515SL-T15P 3,0 T00-15P30
CC17P-06 10,0 – MN1520-T20P 6,0 T00T-20P60
CC17P-09 10,0 – MN1920-T20P 6,0 T00T-20P60
CC20P 10,0 – MN1925-T25P 5,0 T00T-25P50
CC20P-V13 10,0 – MN2525-T25P 6,0 T00T-25P60
CD09-S09 2,0 T00-09P20 PL1403-T09P 2,5 T00-09P20
CD12-S12 3,5 T00-15P35 TCEI0409 3,5 –
Thread tapping
CD16-S16 5,0 T00-20P50 TCEI0509 6,0 H00T-4060

CD19-S19 5,0 T00-20P50 TCEI0513 6,0 H00T-4060
CD19-V16 5,0 T00-20P50 TCEI0609 8,0 H00T-5080
CSC8015-T20P 5,0 T00-20P50 TCEI0613 8,0 H00T-5080
CSC1015-T20P 5,0 T00-20P50 TCEI0614 8,0 H00T-5080
CSP16-T15P 2,0 T00-15P20 TCEI0620 8,0 H00T-5080
CSP22-T15P 3,0 T00-15P30 TCEI0815 10,0 H00T-60100
CSP27-T25P 6,0 T00T-25P60 TCEI0825 10,0 H00T-60100
TCEI1020 15,0 –
WS1620-T20P 3,5 T00-20P35
WS1920-T20P 3,5 T00-20P35
Annex
WS2325-T25P 5,0 T00T-25P50
For the Seco range of torque keys, please see next page
38
www.secotools.com
Thread turning
Torque keys
The range of torque keys with fixed torque values are available, in combinations key grip/torque value for insert locking, for most of the Seco turning products.
Thread turning
By using a torque key you always ensure the correct tightening force when mounting the insert. The torque value is given on page(s) 38 for each screw.
Torque keys are calibrated according to ISO 6789.
Code key: T00-15P35
T00 = Torque screwdriver type for Torx Plus blade
T00T = Torque T-handle type for Torx Plus blade
H00 = Torque screwdriver for hexagonal blade
H00T = Torque T-handle type for hexagonal blade
15P = Torx Plus size

35 = Torque value 3,5 Nm
Torque key* Replaceable blade Torx Plus size Torque value Torque key* Replaceable blade Torx Plus size Torque value
MDT
T00-06P05 T00-06P T06P 0,5 Nm T00T-15P50 T00T-15P T15P 5,0 Nm
Mini-Shaft™
T00-10P20 T00-10P T10P 2,0 Nm
T00-10P30 T00-10P T10P 3,0 Nm
T00-10P35 T00-10P T10P 3,5 Nm
T00-15P20 T00-15P T15P 2,0 Nm
T00-15P30 T00-15P T15P 3,0 Nm
T00-15P35 T00-15P T15P 3,5 Nm
T00-15P40 T00-15P T15P 4,0 Nm
T00-15P50 T00-15P T15P 5,0 Nm
T00-20P35 T00-20P T20P 3,5 Nm
T00-20P50 T00-20P T20P 5,0 Nm
*Including blade *Including blade
Thread milling
Torque key* Replaceable blade Hexagonal size Torque value Torque key* Replaceable blade Hexagonal size Torque value
H00-1305 H00-1.3 1,3 mm 0,5 Nm H00T-3050 H00T-3.0 3 mm 5,0 Nm

H00-1505 H00-1.5 1,5 mm 0,5 Nm H00T-4050 H00T-4.0 4 mm 5,0 Nm
H00-1509 H00-1.5 1,5 mm 0,9 Nm H00T-4060 H00T-4.0 4 mm 6,0 Nm
H00-2009 H00-2.0 2,0 mm 0,9 Nm H00T-5050 H00T-5.0 5 mm 5,0 Nm
H00-2016 H00-2.0 2,0 mm 1,6 Nm H00T-5080 H00T-5.0 5 mm 8,0 Nm
H00-2020 H00-2.0 2,0 mm 2,0 Nm H00T-50100 H00T-5.0 5 mm 10,0 Nm
H00-2512 H00-2.5 2,5 mm 1,2 Nm H00T-60100 H00T-6.0 6 mm 10,0 Nm
Thread tapping
H00-2530 H00-2.5 2,5 mm 3,0 Nm

H00-2535 H00-2.5 2,5 mm 3,5 Nm
H00-3020 H00-3.0 3,0 mm 2,0 Nm
H00-3030 H00-3.0 3,0 mm 3,0 Nm
H00-4030 H00-4.0 4,0 mm 3,0 Nm
*Including blade *Including blade
Please note that the blades are not interchangeable between screwdriver type and T-handle type.
Torx Plus® is a registered trade mark belonging to Camcar-Textron (USA)
Annex
39
www.secotools.com
Thread turning
Application overview, toolholders

External toolholders
Thread turning
PER/L...QHDJETI CER/L CER/L...Q CER...HD

CER...CQHD
PER/L...QHDJET CER/L...HD CER/L...QHD CER/L...QHD
Page(s) 55-56 Page(s) 60 Page(s) 62, 63 Page(s) 66 Page(s) 69

MDT
Internal toolholders
CNR/L...AHD
PNR/L...AHDJET SNR/L CNR/L...AHD
CNR/L...APIHD
Mini-Shaft™
Page(s) 57, 58-59 Page(s) 70 Page(s) 71, 72 Page(s) 79
Seco-Capto™
CER/L-..HD...CHD Ext. CER..HD Ext. SNR Int. CNR/L-..HD Int. CNR/L-..CHD Int.
Thread milling
Page(s) 80, 81 Page(s) 84 Page(s) 85, 86 Page(s) 87, 88-91 Page(s) 92-94
Seco-Capto™ for MTM
CER-..HD CEL..HD
Thread tapping
Page(s) 95 Page(s) 96
Annex
40
www.secotools.com
Thread turning
Steadyline® with GL connection
GL..-PNR/L...AHDJET GL50-CNR...26AHD
Thread turning
Page(s) 97, 98 Page(s) 99
Quick Change, Jetstream Tooling®, QC-heads, external
MDT
QC..-PER/L-HDJET
Mini-Shaft™
Page(s) 100
Toolholders for peeling Inserts for peeling
CSXCR... SCNN
Thread milling
1.79°
Page(s) 101-102 Page(s) 125
Toolholders for pipe-facing
MSGNR...
Thread tapping
Page(s) 103-104
Annex
41
www.secotools.com
Thread turning
Toolholders for inserts SNMA, SNMG, SNMM / CNMA, CNMG, CNMM
C.-DSKNR/L - CLNR/L 75° C.-MSKNR/L - PCLNR/L 75°

Thread turning
MDT
Page(s) 105 Page(s) 106
Toolholders for chasers

External toolholders for chasers Seco-Capto™ Steadyline® GL..
Seco-Capto™ CNR/L...X Seco-Capto™ CNL...C-X
CER...X CER...X -CNR/L...-I/X
Mini-Shaft™
Page(s) 107-108 Page(s) 109 Page(s) 110-111 Page(s) 112-113 Page(s) 114
Toolholders for Precision Grooves

Thread milling
CEAR/L... SNR/L... CNR/L... CER/L...

Thread tapping
Page(s) 115 Page(s) 117 Page(s) 119 Page(s) 124

Annex
42
www.secotools.com
Thread turning
Application overview, inserts

Partial profile inserts 55° V profile 60° V profile
Thread turning
Page(s) 126-127 Page(s) 128-130, 131
Full profile inserts ISO metric UN
Reusable threaded joints
MDT
Page(s) 132, 133-135, 136, Page(s) 139, 140-142, 143,
137 144
Full profile inserts UNJ MJ
Reusable threaded joints

for the aerospace
industry
Page(s) 145-146 Page(s) 147-148
Mini-Shaft™
Full profile inserts Whitworth, BSW BSPT NPT NPTF Round-DIN405
Permanent threaded
joints for pipe mountings
and couplings
Page(s) 149, 150-151, 152 Page(s) 153-154 Page(s) 155-156 Page(s) 157-158 Page(s) 159-160
Partial profile inserts TR-DIN103 ACME Stub-ACME American Buttress
Thread milling
Motion-transmitting
threads
Page(s) 161-162 Page(s) 163-164 Page(s) 165-166 Page(s) 167-168

Full profile inserts API Rotary Drill Connection Hughes Flush API ROUND API Buttress 1:16 API Buttress 1:12
Thread tapping
Threads for the oil

industry
Page(s) 169-170 Page(s) 171-172 Page(s) 173-174 Page(s) 175-176 Page(s) 177-178
Full profile inserts Hughes H90 Hughes Slimline H90 P.A.C Chasers API/Gost Chipformers for chasers
Threads for the oil

industry
Page(s) 171-172 Page(s) 171-172 Page(s) 171-172 Page(s) 179, 180 Page(s) 181, 182, 183
Annex
43
www.secotools.com
Thread turning
Rotary drilling connections

OCTG pipe and coupling illustration
Thread turning
Pitch
Connections TGTPF API code Snap-Tap® code
TPI
MDT
API Number
NC10 - NC16 6.0 1.5 V055 6API558

NC23 - NC50 4.0 2.0 V038R 4API386
NC56 - NC77 4.0 3.0 V038R 4API384
API Regular
1 - 1 1/2 REG 6.0 1.5 V055 6API558

2 3/8 REG - 4 1/2 REG 5.0 3.0 V040 5API404
5 1/2 REG, 7 5/8 REG, 8 5/8 REG 4.0 3.0 V050 4API504
Mini-Shaft™
6 5/8 REG 4.0 2.0 V050 4API506
Internal Flush
2 3/8 IF - 6 5/8 IF 4.0 2.0 V038R 4API386
Full Hole
3 1/2 FH, 4 1/2 FH 5.0 3.0 V040 5API404

4 FH 4.0 2.0 V038R 4API386
5 1/2 FH, 6 5/8 FH 4.0 2.0 V050 4API506
Hughes External Flush

Thread milling
2 3/8, 2 7/8 6.0 2.0 – 6HEF

3 1/2, 4 1/2 4.0 2.0 V038R 4API386
Hughes Xtra Hole
2 7/8 - 5 4.0 2.0 V038R 4API386
Hughes Slim Hole
2 3/8 - 4 1/2 4.0 2.0 V038R 4API386
Hughes Double Streamline
3 1/2 - 5 1/2 4.0 2.0 V038R 4API386
Hughes H90
Thread tapping
3 1/2 - 6 5/8 3.5 2.0 90V050 3.5H906

7 - 8 5/8 3.5 3.0 90V050 3.5H904
Hughes Slimline H90
2 3/8 - 3 1/2 3.0 1.25 90V050 3H90
Hughes ACME Regular
2 3/8 - 6 5/8 4.0 3.373 – 4HACME
Hughes ACME Streamline
2 3/8 - 5 1/2 4.0 3.373 – 4HACME
P.A.C.
2 3/8 PAC - 3 1/2 PAC 4.0 1.5 V076 4PAC

Annex
Macaroni
MT, AMT, AMMT 6.0 1.5 V055 6API558
44
www.secotools.com
Thread turning
Rotary drilling connections

Connections Insert dimensions
Thread turning
Connections
Pitch TGTPF L IC PDX PDY
Snap-Tap® code API code
TPI inch mm mm mm mm
MDT
6API558 V055 6.0 1.5 22,0 12,700 2,5 2,0
5API404 V040 5.0 3.0 22,0 12,700 2,5 2,0
5API404 V040 5.0 3.0 27,5 15,875 3,2 2,2
4API386 V038R 4.0 2.0 22,0 12,700 2,5 1,9
4API386 V038R 4.0 2.0 27,5 15,875 3,2 2,2
4API384 V038R 4.0 3.0 27,5 15,875 3,2 2,2
4API506 V050 4.0 2.0 27,5 15,875 3,2 2,2
Mini-Shaft™
4API504 V050 4.0 3.0 27,5 15,875 3,2 2,2
6HEF – 6.0 2.0 22,0 12,700 2,5 2,0
4PAC V076 4.0 1.5 27,5 15,875 3,2 2,2
3,5H906 90V050 3.5 2.0 27,5 15,875 3,2 2,2
3,5H904 90V050 3.5 3.0 27,5 15,875 3,2 2,2
3H90 90V050 3.0 1.25 27,5 15,875 3,2 2,2
4HACME – 4.0 3.373 27,5 15,875 3,2 2,2
Thread milling
Thread tapping
Annex
45
www.secotools.com
Thread turning
Thread profile
Thread turning
R/Fr mm Fc mm r1 mm r2 mm
Profile TPI TGTPF API code Snap-Tap® code
(inch) (inch) (inch) (inch)
0,508 1,016 0,381
5.0 3.0 – V040 5API404
(0.200) (0.0400) (0.0150)
0,965 1,651 0,381
4.0 2.0 – V038R 4API386
(0.0380) (0.0650) (0.0150)
0,965 1,651 0,381
4.0 3.0 – V038R 4API384
(0.0380) (0.0650) (0.0150)
0,635 1,270 0,381
4.0 2.0 – V050 4API506
(0.0250) (0.0500) (0.0150)
0,635 1,270 0,381
4.0 3.0 – V050 4API504
(0.0250) (0.0500) (0.0150)
MDT
1,194 1,397 0,381 0,381

6.0 1.5 V055 6API558
(0.0470) (0.0550) (0.0150) (0.0150)
0,559 0,813 0,381 0,381
6.0 2.0 – 6HEF
(0.0220) (0.0320) (0.0150) (0.0150)
1,702 1,930 0,381 0,381
4.0 1.5 V076 4PAC
(0.0670) (0.0760) (0.0150) (0.0150)
Mini-Shaft™
0,864 1,270 0,381

3.5 2.0 0,762 90V050 3,5H906
(0.0340) (0.0500) (0.0150)
0,864 1,270 0,381
3.5 3.0 0,762 90V050 3,5H904
(0.0340) (0.0500) (0.0150)
1,727 2,134 0,381
3.0 1.25 0,762 90V050 3H90
(0.0680) (0.0840) (0.0150)
Thread milling
2,253 2,388 0,787 0,787

4.0 3.373 – 4HACME
(0.0887) (0.0940) (0.0310) (0.0310)
Thread tapping
Annex
46
www.secotools.com
Thread turning
Oil and gas threading

Seco Snap-Tap® Quality Assurance
Thread turning
1. Metallurgical control of substrate 2. Dimension check after sintering 3. Dimension control after bottom grinding
Check of substrate regarding Hc, MM and Measuring of IC and thickness. Thickness and cutting edge height.
MDT
porosity. Measured according to SPM. Flatness.
Measured according to SPM. Values stored in a database. Measured according to SPM.
Values stored in a database.
4. Dimension control after grinding 5. Edge measuring 6. Measuring of coating

Profile and radius. Edge radius checked during honing. Coating, check of thickness and adhesion.
Measured according to SPM. Measured according to SPM. Measured according to SPM.
Values stored in a database. Values stored in a database.
7. Final inspection 8. Production management System 9. Abbreviations
Mini-Shaft™
Visual Inspection. SGS (SPM1) - Control specifications. LS - Local management Systems - contains local
Sampling in accordance to AQL. LS - Production instructions. process descriptions, routines, procedures and
Seco Act - System for preventive and corrective instructions.
actions. SGS - Seco Global Standards - consists of
Approved to ISO 9001 and 14001 standard. instructions common for all Seco companies.
SPM - Seco Production Manual - Part of SGS is
a collection of instructions and documents with
the purpose to guide and maintain the quality
level of Seco products.
AQL - Accepted Quality Level (Mil-std).
MM - Content of Tungsten in binder.
Thread milling
Hc - Coercivity, describing grainsize.
Thread tapping
Annex
47
www.secotools.com
Thread turning
Oil and gas threading

Seco Chasers Quality Assurance
Thread turning
1. Metallurgical control of substrate 2. Dimension control after top and bottom 3. Measuring after periphery Grinding
Check of substrate regarding Hc, MM and grinding Optical measuring.
MDT
porosity. Thickness. Data stored in a database.

Measured according to SPM. Roughness Ra.
Values stored in a database. Flatness.
Measured according to SPM.
4. Dimension control after grinding 5. Edge measuring 6. Measuring of coating

Profile and radius. Edge radius checked during honing. Coating (PVD), check of thickness and adhesion.
Measured according to SPM. Measured according to SPM. Measured according to SPM.
Values stored in a database. Values stored in a database.
Mini-Shaft™
7. Height classification 8. Final inspection 9. Traceability

Optical measuring of height. Edge inspection 100%. Finished products from each order saved for
Graphic presentation of values. Profile check with tolerance drawing, sampling in future reference.
Sorted and labelled with height classification. accordance to AQL. Saved 5 years from production date.
Finished product has full traceability.
10. Overlay drawings 11. Production management System 12. Abbreviations

Printer for overlays is calibrated with glass scale SGS (SPM1) - Control specifications. LS - Local management Systems - contains local
monthly. LS - Production instructions. process descriptions, routines, procedures and
Scaled master printout is saved according to Seco Act - System for preventive and corrective instructions.
SPM. actions. SGS - Seco Global Standards - consists of
Thread milling
Approved to ISO 9001 and 14001 standard. instructions common for all Seco companies.
SPM - Seco Production Manual - Part of SGS is
a collection of instructions and documents with
the purpose to guide and maintain the quality
level of Seco products.
AQL - Accepted Quality Level (Mil-std).
MM - Content of Tungsten in binder.
Hc - Coercivity, describing grainsize.
Thread tapping
Annex
48
www.secotools.com
Thread turning
ISO attributes
ISO attribute Explanation
Thread turning
AN clearance angle major
B shank width
BAWS workpiece side body angle
BD body diameter
BLQ balance quality code
CDRX cutting depth radial maximum
CDX cutting depth maximum
CDXI cutting depth maximum insert
CDXSH cutting depth maximum shank
CF spot chamfer
MDT
CNT coolant entry thread size
CP coolant pressure
CTMS connection text machine side
CTWS connection text workpiece side
CUTDIA work piece parting diameter maximum
CW cutting width
D1 fixing hole diameter
DCB connection bore diameter
DCB1 connection bore diameter 1
Mini-Shaft™
DCB2 connection bore diameter 2
DCINN cutting diameter internal minimum
DCINN2 cutting diameter internal minimum 2
DCINN3 cutting diameter internal minimum 3
DCP data chip provision
DCSFMS contact surface diameter machine side
DF flange diameter
DIX tool changer interference diameter maximum
DMM shank diameter
Thread milling
EPSR insert included angle
GAMO rake angle orthogonal
H shank height
HF functional height
HRY measure, Measure from ref. plane of mounting to bottom plane of unit in direction Y m
IC inscribed circle diameter
INPLM minimum initial plunge diameter
INPLX initial plunge maximum
INSD insert diameter
Thread tapping
INSL insert length

KCHL corner chamfer angle left hand
KCHR corner chamfer angle right hand
L cutting edge length
LAMS inclination angle
LB1 body length 1
LB2 body length 2
LCOG length to center of gravity
LF functional length
LF2 functional length_2
Annex
LFS functional length secondary

LH head length
LH2 head length 2
LIG insert gauge length
LPR protruding length
49
www.secotools.com
Thread turning
ISO attributes
ISO attribute Explanation
Thread turning
LS shank length
LSC clamping length
LU usable length
OAH overall height
OAL overall length
OAW overall width
PDX profile distance ex
PSIRL cutting edge angle major left hand
PHDR recommended premachined hole diameter
PSIRR cutting edge angle major right hand
MDT
RADH radial body height

RADW radial body width
RE corner radius
RETL flank radius left hand
RETR flank radius right hand
RPMX rotational speed maximum
S insert thickness
TDZ thread diameter size
TPI threads per inch
Mini-Shaft™
W1 insert width
WF functional width
WF2 functional width 2
WFS functional width secondary
Thread milling
Thread tapping
Annex
50
www.secotools.com
Thread turning
Jetstream Tooling® Introduction

Seco Jetstream Tooling® is a revolutionary solution to the problem of deliver- Coolant can either be supplied to the toolholder externally through a coolant
Thread turning
ing coolant precisely to the cutting zone. hose, which is attached to one of the inlet positions of the toolholder, or by
the new JETI connection.
It works by delivering a concentrated high pressure jet of coolant at high
velocity straight to the optimum position precisely to the cutting edge. When it comes to boring bars, the coolant is supplied internally from the
back end.
The jet lifts the chips away from the rake face, improving chip control and
tool life, enabling increased cutting data. For internal applications, holders for Steadyline® bars are also available,
designated GL-. Please see more information regarding Steadyline® in
It has been proven to show improvements in nearly all material groups with catalog Turning.
a wide choice of coolant pressures.
Square shank holders for external applications are designed with the Duo
Seco Jetstream Tooling® Duo holders, yet another innovation introduced to technique. They also have the option for coolant supply through JETI con-
the market, features both a rake face and a flank face jet, that may provide nection.
even better chip control and significantly longer tool life.
The JETI is developed with a compact assembly in mind, the tooling elimi-
MDT
For many years, Seco has been supporting the market with Jetstream Tool- nates the need for any external piping and connections that would otherwise
ing® solutions for ISO-turning and grooving applications. Now the Jetstream obstruct machine movements in tight workspaces. Coolant hole underneath
Tooling® technique will also be available on holders for thread turning the square shank holder make it possible for coolant to reach the cutting
(Snap-Tap®). edge directly from the tool block.
Mini-Shaft™
Thread milling
Thread tapping
Annex
51
www.secotools.com
Thread turning
Jetstream Tooling® Assembly instructions

Thread turning
Description of parts
For personal safety, Jetstream Tooling® should only be

used with the machine door in a fully closed position in
accordance with general machine safety procedures.
Please ensure that the coolant hose is located correctly Coolant hose
and fully tightened with all seals in position. The unused 1/8” BSP Adapter
coolant hole should have a blanking plug fitted. Please Copper wash
note the maximum safe working pressures shown below.
MDT
Plug
Mini-Shaft™
For accessories, see next page.
JETI Assembly instructions
To use the benefits of a JETI-holder there is a need

to use a basic holder designed for JETI-connections.
Maximum coolant pressure when using this feature is
150 bar.
Thread milling
Note: The unused coolant hole (from the back) should

have a blanking plug fitted.
Thread tapping
Annex
52
www.secotools.com
Thread turning
Accessories and spare parts

Hoses, Part No. ordering code includes spare parts
Thread turning
Length mm
Connection type Part No. (inch)
150
JET-HOSE150SS
(5.906)
Straight fitting
200
JET-HOSE200SS
(7.874)
250
JET-HOSE250SS
(9.843)
300
JET-HOSE300SS
(11.811)
150
Banjo fitting JET-HOSE150BS
(5.906)
200
JET-HOSE200BS
(7.874)
MDT
250
JET-HOSE250BS
(9.843)
300
JET-HOSE300BS
(11.811)
150
Banjo-to-Banjo fitting JET-HOSE150BB
(5.906)
200
JET-HOSE200BB
(7.874)
250
JET-HOSE250BB
(9.843)
300
JET-HOSE300BB
(11.811)
Mini-Shaft™
All hoses are pressure rated to a maximum of 275 bar (3990 psi).
Spare Parts, Parts included in delivery
Part No. ...SS ...BS ...BB
JET-CFP1/8BSP [ [ [
Thread milling
JET-CBP15 [ [ [
JET-AD1/8BSP [ [
JET-ADM10 [
JET-BBM10 [ [
Thread tapping
JET-BB1/8BSP [ [
JET-C1/4-1/8BSP [ [
JET-P1/8-5mm [ [ [
JET-WM10* [ [ [
JET-ORING10X1*/** [ [ [
Annex
Pack of 2, except *Pack of 20

** Not suitable for use in inducer
For assembly instructions, see page(s) 52
53
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT
Mini-Shaft™
Thread turning Toolholders

The innovative toolholders made for use with Snap-Tap® inserts offer the best possible holding power available for
long tool life and high accuracy. They employ an Anti-Twist insert locking system that features a carbide pin in the
Thread milling
back of the insert pocket that resists wear and prevents the insert from turning or twisting under pressure during
machining.
■ Anti-Twist Toolholders.
■ D-style clamp for securely pulls insert down and into the pocket.
Thread tapping
Annex
54
www.secotools.com
Thread turning
Toolholders
Jetstream Tooling® – Toolholders, external

For S-inserts, Snap-Tap®
Thread turning
MDT
• Right-hand version shown
• For inserts program, see page(s) 126, 128, 129, 132, 133, 139, 140, 145, 147,
149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, 175, 177
• CP* Max coolant pressure (bar) using hose connection otherwise according
machine side adapter
Designation Item number H B LF OAL WF LH Weight CP CTWS
mm mm mm mm mm mm kg bar
PEL2020X16QHDJETI 03007229 20,0 20,0 27,0 91,0 25,0 30,0 0,4 275,0 16
Mini-Shaft™
PEL2525X16QHDJETI 03007231 25,0 25,0 27,0 111,0 32,0 30,0 0,6 275,0 16
PER2020X16QHDJETI 03007228 20,0 20,0 27,0 91,0 25,0 30,0 0,3 275,0 16
PER2525X16QHDJETI 03007230 25,0 25,0 27,0 111,0 32,0 30,0 0,5 275,0 16
PER2525X22QHDJETI 03007241 25,0 25,0 41,0 125,0 32,0 44,0 0,7 275,0 22
PER2525X27QHDJETI 03007246 25,0 25,0 41,0 125,0 32,0 44,0 0,7 275,0 27
Spare Parts, included in delivery
For holders Insert lever Insert shim (S) Lever screw Locking key Shim pin
Thread milling
...16QHD... PP3712 GXA16-1 LS0612-T15P T15P-7 AC4625
...22QHD... PP4816 NXA22-1 LS0815-T25P T25P-7 AC5035
...27QHD... PP6019 VXA27-1 LS0820-T25P T25P-7 AC6050
Accessories
Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim
For holders (M) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) Plug
Thread tapping
...16QHD... MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – – P6SS4X8

...22QHD... MXA22-1 NXA22-0 NXA22-98 NXA22-97.5 NXA22-0.5 NXA22-1.5 NXA22-2 NXA22-3 NXA22-4 NXA22-99.5 NXA22-99 NXA22-98.5 P6SS4X8
...27QHD... MXA27-1 VXA27-0 VXA27-98 – VXA27-0.5 VXA27-1.5 VXA27-2 VXA27-3 VXA27-4 VXA27-99.5 VXA27-99 VXA27-98.5 P6SS4X8
Annex
55
www.secotools.com
Thread turning
Toolholders
Jetstream Tooling® – Toolholders, external

Thread turning
MDT

149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, 175, 177
Designation Item number H B LF WF LH Weight CP CTWS
Inch Inch Inch Inch Inch lbs psi
PEL075516QHDJET 03007235 0.750 0.750 5.000 0.970 1.181 1.540 10.827 16

Mini-Shaft™
PEL100616QHDJET 03007237 1.000 1.000 6.000 1.250 1.181 1.980 10.827 16

PEL125616QHDJET 03007240 1.250 1.250 6.000 1.500 1.181 2.870 10.827 16
PER075516QHDJET 03007234 0.750 0.750 5.000 0.970 1.181 0.880 10.827 16
PER100616QHDJET 03007236 1.000 1.000 6.000 1.250 1.181 1.980 10.827 16
PER100622QHDJET 03007244 0.984 0.984 6.000 1.250 1.732 1.980 10.827 22
PER100627QHDJET 03007249 0.984 0.984 6.000 1.250 1.732 1.760 10.827 27
PER125616QHDJET 03007238 1.250 1.250 6.000 1.500 1.181 2.650 10.827 16
PER125622QHDJET 03007245 0.984 0.984 6.000 1.500 1.732 2.650 10.827 22
PER125627QHDJET 03007250 0.984 0.984 6.000 1.500 1.732 2.650 10.827 27
Thread milling
..16QHJET PP3712 GXA16-1 LS0612-T15P T15P-7 AC4625

..22QHJET PP4816 NXA22-1 LS0815-T25P T25P-7 AC5035
Thread tapping
..27QHJET PP6019 VXA27-1 LS0820-T25P T25P-7 AC6050
Accessories
For holders (M) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) Plug
..16QHJET MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – – P6SS4X8

..22QHJET MXA22-1 NXA22-0 NXA22-98 NXA22-97.5 NXA22-0.5 NXA22-1.5 NXA22-2 NXA22-3 NXA22-4 NXA22-99.5 NXA22-99 NXA22-98.5 P6SS4X8
..27QHJET MXA27-1 VXA27-0 VXA27-98 – VXA27-0.5 VXA27-1.5 VXA27-2 VXA27-3 VXA27-4 VXA27-99.5 VXA27-99 VXA27-98.5 P6SS4X8
Annex
56
www.secotools.com
Thread turning
Toolholders
Jetstream Tooling® – Toolholders, internal

Thread turning
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 174
Designation Item number H B LF WF LH DCINN DMM Weight CP CTWS
mm mm mm mm mm mm mm kg bar
PNL0020P16AHDJET 03006931 19,0 18,0 171,0 13,8 42,0 24,0 20,0 0,5 275,0 16
Mini-Shaft™
PNL0025R16AHDJET 03006933 24,0 23,0 200,0 16,3 42,0 29,0 25,0 0,6 275,0 16
PNL0025R22AHDJET 03006946 23,0 24,0 200,0 17,8 42,0 30,0 25,0 0,7 275,0 22
PNL0032S16AHDJET 03006935 30,0 31,0 250,0 19,8 42,0 36,0 32,0 1,5 275,0 16
PNL0032S22AHDJET 03006948 30,0 31,0 250,0 21,3 42,0 38,0 32,0 1,5 275,0 22
PNL0040T22AHDJET 03006950 37,0 38,5 300,0 25,3 42,0 46,0 40,0 2,6 275,0 22
PNR0020P16AHDJET 03006930 19,0 18,0 171,0 13,8 42,0 24,0 20,0 0,4 275,0 16
PNR0025R16AHDJET 03006932 24,0 23,0 200,0 16,3 42,0 29,0 25,0 0,7 275,0 16
PNR0025R22AHDJET 03006945 23,0 24,0 200,0 17,8 42,0 30,0 25,0 0,7 275,0 22
PNR0032S16AHDJET 03006934 30,0 31,0 250,0 19,8 42,0 36,0 32,0 1,2 275,0 16
Thread milling
PNR0032S22AHDJET 03006947 30,0 31,0 250,0 21,3 42,0 38,0 32,0 1,5 275,0 22
PNR0040T16AHDJET 03006936 38,5 37,0 300,0 23,8 45,0 44,0 40,0 2,2 275,0 16
PNR0040T22AHDJET 03006949 37,0 38,5 300,0 25,3 42,0 46,0 40,0 2,9 275,0 22
PNR0040T27AHDJET 03006955 37,0 38,5 300,0 26,8 62,0 48,0 40,0 2,8 275,0 27
PNR0050U16AHDJET 03006937 47,0 48,5 350,0 28,8 52,0 54,0 50,0 4,5 275,0 16
PNR0050U22AHDJET 03006951 47,0 48,5 350,0 30,3 48,0 56,0 50,0 4,9 275,0 22
PNR0050U27AHDJET 03006956 47,0 48,5 350,0 31,8 62,0 58,0 50,0 4,3 275,0 27
PNR0063V27AHDJET 03006957 60,0 61,5 400,0 38,3 62,0 70,0 63,0 8,9 275,0 27 Thread tapping
...20... PP3712 GXA16-1 LS0610-T15P T15P-7 AC4625

...25/32/40/50... PP3712 GXA16-1 LS0612-T15P T15P-7 AC4625
...22... PP4816 NXA22-1 LS0815-T25P T25P-7 AC5035
...27... PP6019 VXA27-1 LS0820-T25P T25P-7 AC6050
Annex
57
www.secotools.com
Thread turning
Toolholders
Accessories
For holders (M) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S)
Thread turning
...20... MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – –

...25/32/40/50... MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – –
...22... MXA22-1 NXA22-0 NXA22-98 NXA22-97.5 NXA22-0.5 NXA22-1.5 NXA22-2 NXA22-3 NXA22-4 NXA22-99.5 NXA22-99 NXA22-98.5
...27... MXA27-1 VXA27-0 VXA27-98 – VXA27-0.5 VXA27-1.5 VXA27-2 VXA27-3 VXA27-4 VXA27-99.5 VXA27-99 VXA27-98.5
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
58
www.secotools.com
Thread turning
Toolholders
Jetstream Tooling® – Toolholders, internal

Thread turning
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 174
Designation Item number H B LF WF LH DCINN DMM Weight CP CTWS
Inch Inch Inch Inch Inch Inch Inch lbs psi
PNL00075716AHDJET 03006940 0.700 0.650 7.000 0.520 1.654 0.950 0.750 1.100 10.827 16
Mini-Shaft™
PNL00100816AHDJET 03006942 0.951 0.902 8.000 0.650 1.654 1.150 1.000 1.540 10.827 16
PNR00075716AHDJET 03006939 0.700 0.650 7.000 0.520 1.654 0.950 0.750 0.660 10.827 16
PNR00100816AHDJET 03006941 0.951 0.902 8.000 0.650 1.654 1.150 1.000 1.540 10.827 16
PNR00100822AHDJET 03006952 0.902 0.951 8.000 0.710 1.654 1.181 1.000 1.980 10.827 22
PNR001251016AHDJET 03006943 1.200 1.150 10.000 0.780 1.654 1.404 1.250 3.090 10.827 16
PNR001251022AHDJET 03006953 1.200 1.150 10.000 0.840 1.654 1.500 1.250 1.320 10.827 22
PNR001501216AHDJET 03006944 1.339 1.419 12.000 0.900 1.654 1.700 1.500 5.290 10.827 16
PNR001501222AHDJET 03006954 1.339 1.419 12.000 0.970 1.654 1.800 1.500 5.290 10.827 22
PNR001501227AHDJET 03006958 1.339 1.419 12.000 1.020 2.441 1.890 1.500 5.290 10.827 27
Thread milling
PNR/L000757.. PP3712 GXA16-1 LS0610-T15P T15P-7 AC4625

..16AHDJET PP3712 GXA16-1 LS0612-T15P T15P-7 AC4625 Thread tapping
..22AHDJET PP4816 NXA22-1 LS0815-T25P T25P-7 AC5035

..27AHDJET PP6019 VXA27-1 LS0820-T25P T25P-7 AC6050
Accessories
PNR/L000757.. MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – –

..16AHDJET MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – –
..22AHDJET MXA22-1 NXA22-0 NXA22-98 NXA22-97.5 NXA22-0.5 NXA22-1.5 NXA22-2 NXA22-3 NXA22-4 NXA22-99.5 NXA22-99 NXA22-98.5
Annex
..27AHDJET MXA27-1 VXA27-0 VXA27-98 – VXA27-0.5 VXA27-1.5 VXA27-2 VXA27-3 VXA27-4 VXA27-99.5 VXA27-99 VXA27-98.5
59
www.secotools.com
Thread turning
Toolholders
Toolholders, external
Thread turning
CER/L CER/L..HD
MDT

149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 171
Designation Item number H B LF WF LH Weight CTWS
mm mm mm mm mm kg
CEL1616H16 02454781 16,0 16,0 100,0 16,0 22,0 0,2 16

Mini-Shaft™
CEL2020K16HD 02475482 20,0 20,0 125,0 20,0 32,0 0,4 16

CEL2525M16HD 02457885 25,0 25,0 150,0 25,0 32,0 0,8 16
CEL2525M22HD 02457890 25,0 25,0 150,0 25,0 38,0 0,8 22
CER1616H16 02454783 16,0 16,0 100,0 16,0 22,0 0,2 16
CER2020K16HD 02475454 20,0 20,0 125,0 20,0 32,0 0,4 16
CER2525M16HD 02457882 25,0 25,0 150,0 25,0 32,0 0,8 16
CER2525M22HD 02457888 25,0 25,0 150,0 25,0 38,0 0,8 22
CER4040R16HD 02853574 40,0 40,0 200,0 40,0 37,0 2,5 16
CER4040R22HD 02853575 40,0 40,0 200,0 40,0 42,0 2,5 22
Thread milling
CER4040R27HD 02853576 40,0 40,0 200,0 40,0 48,0 2,5 27
For holders Cantilever clamp Clamp key Clamp kit Clamp screw Insert shim (S) Shim screw Spring
...16 – T15P-2 CSP16-T15P – GX16-1 CS3507-T09P –

...16HD CHD16 T15P-7 – L85020-T15P GX16-1 CS3507-T09P S6912
Thread tapping
...22HD CHD22 T20P-7L – L86025-T20P NX22-1 CS4009-T15P S7616

...27HD CHD27 T20P-7L – L86025-T20P VX27-1 C05012-T15P S7616
Accessories
For holders (M) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) Shim key
...16 MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2

...16HD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
Annex
...22HD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
...27HD MX27-1 VX27-98.5 VX27-2 – VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
60
www.secotools.com
Thread turning
Toolholders
Thread turning
CER/L..Q CER/L..QHD
MDT
149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 171
Inch Inch Inch Inch Inch lbs
CEL0504-16Q 00072466 0.500 0.500 4.000 0.625 0.900 0.440 16ER...

CEL06254-16Q 00072544 0.625 0.625 4.000 0.750 0.900 0.660 16EL...
Mini-Shaft™
CEL0755-16HD 02483997 0.750 0.750 5.000 1.000 0.900 1.100 16EL...
CEL1006-16QHD 02462852 1.000 1.000 6.000 1.250 1.100 1.980 16EL...
CEL1256-16QHD 02462853 1.250 1.250 6.000 1.500 1.100 3.090 16EL...
CER03753-16Q 00072538 0.375 0.375 3.000 0.375 0.900 0.440 16ER...
CER0504-16Q 00072524 0.500 0.500 4.000 0.625 0.900 0.440 16ER...
CER06254-16Q 00072498 0.625 0.625 4.000 0.750 0.900 0.660 16ER...
CER0755-16HD 02483996 0.750 0.750 5.000 1.000 0.900 0.880 16ER...
CER1006-16QHD 02462821 1.000 1.000 6.000 1.250 1.100 1.980 16ER...
CER1256-16QHD 02462823 1.250 1.250 6.000 1.500 1.181 3.090 16ER...
Thread milling
CER1506-16QHD 02462825 1.500 1.500 6.000 1.750 1.100 3.970 16ER...
CER/L 3753..0504.. – T15P-2 CSP16-T15P – GX16-1 CS3507-T09P – Thread tapping
CEL 06254.. – T15P-2 CSP16-T15P – GX16-1 CS3507-T09P –

CER/L 0755..1006.. CHD16 T15P-7 – L85020-T15P GX16-1 CS3507-T09P S6912
CER/L 1256..1506.. CHD16 T15P-7 – L85020-T15P GX16-1 CS3507-T09P S6912
CER 06254.. – T15P-2 CSP16-T15P – GX16-1 CS3507-T09P –
Accessories
For holders Insert shim (K) Insert shim (M) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Shim key
CER/L 3753..0504.. – MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
Annex
CEL 06254.. – MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
CER 06254.. GX16-2 MX16-1 GX16-0 – GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
61
www.secotools.com
Thread turning
Toolholders
Thread turning
CER/L...Q CER/L...QHD
MDT

149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 171
mm mm mm mm mm kg
CEL1212H16Q 75025275 12,0 12,0 100,0 16,0 22,0 0,2 16

Mini-Shaft™
CEL1616H16Q 75025277 16,0 16,0 100,0 20,0 22,0 0,2 16

CEL2020K16QHD 02475514 20,0 20,0 125,0 25,0 32,0 0,5 16
CEL2525M16QHD 00016766 25,0 25,0 150,0 32,0 32,0 0,8 16
CEL2525M22QHD 00016777 25,0 25,0 150,0 32,0 38,0 0,8 22
CEL2525M27QHD 00016791 25,0 25,0 150,0 32,0 46,0 0,8 27
CEL3225P16QHD 00016770 32,0 25,0 170,0 32,0 32,0 1,1 16
CEL3225P22QHD 00016782 32,0 25,0 170,0 32,0 38,0 1,1 22
CEL3225P27QHD 00016830 32,0 25,0 170,0 32,0 46,0 1,2 27
CEL3232P16QHD 00016774 32,0 32,0 170,0 40,0 32,0 1,4 16
Thread milling
CEL3232P22QHD 00016785 32,0 32,0 170,0 40,0 38,0 1,4 22

CEL3232P27QHD 00016864 32,0 32,0 170,0 40,0 46,0 1,5 27
CER1212H16Q 75025274 12,0 12,0 100,0 16,0 22,0 0,2 16
CER1616H16Q 75025276 16,0 16,0 100,0 20,0 22,0 0,3 16
CER2020K16QHD 02475493 20,0 20,0 125,0 25,0 32,0 0,5 16
CER2525M16QHD 00016769 25,0 25,0 150,0 32,0 32,0 0,8 16
CER2525M22QHD 00016781 25,0 25,0 150,0 32,0 38,0 0,8 22
CER2525M27QHD 00016800 25,0 25,0 150,0 32,0 46,0 0,8 27
CER3225P16QHD 00016771 32,0 25,0 170,0 32,0 32,0 1,1 16
Thread tapping
CER3225P22QHD 00016783 32,0 25,0 170,0 32,0 38,0 1,2 22

CER3225P27QHD 00016857 32,0 25,0 170,0 32,0 46,0 1,2 27
CER3232P16QHD 00016776 32,0 32,0 170,0 40,0 32,0 1,4 16
CER3232P22QHD 00016788 32,0 32,0 170,0 40,0 38,0 1,4 22
CER3232P27QHD 00016878 32,0 32,0 170,0 40,0 46,0 1,5 27
Annex
...16Q – T15P-2 CSP16-T15P – GX16-1 CS3507-T09P –

...16QHD CHD16 T15P-7 – L85020-T15P GX16-1 CS3507-T09P S6912
...22QHD CHD22 T20P-7L – L86025-T20P NX22-1 CS4009-T15P S7616
...27QHD CHD27 T20P-7L – L86025-T20P VX27-1 C05012-T15P S7616
62
www.secotools.com
Thread turning
Toolholders
Accessories
Thread turning
...16Q MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
...16QHD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
...22QHD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
...27QHD MX27-1 VX27-98.5 VX27-2 – VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
63
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT

149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 171
CEL1005-22QHD 02462854 1.000 1.000 5.000 1.250 1.300 1.760 22EL...

CEL1006-22QHD 02462856 1.000 1.000 6.000 1.250 1.300 2.200 22EL...
Mini-Shaft™
CEL1256-22QHD 02462857 1.250 1.250 6.000 1.500 1.300 3.090 22EL...

CER1005-22QHD 02462826 1.000 1.000 5.000 1.250 1.300 0.220 22ER...
CER1006-22QHD 02462827 1.000 1.000 6.000 1.250 1.300 1.980 22ER...
CER1256-22QHD 02462829 1.250 1.250 6.000 1.500 1.417 2.870 22ER...
CER1506-22QHD 02462831 1.500 1.500 6.000 1.750 1.300 4.190 22ER...
For holders Cantilever clamp Clamp key Clamp screw Insert shim (S) Shim screw Spring
Thread milling
CER/L..22.. CHD22 T20P-7L L86025-T20P NX22-1 CS4009-T15P S7616
Accessories
Thread tapping
CER/L..22.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
Annex
64
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT
149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 171
CEL1006-27QHD 02462859 1.000 1.000 6.000 1.250 2.000 2.200 27EL...

CEL1256-27QHD 02462861 1.250 1.250 6.000 1.500 1.600 2.870 27EL...
Mini-Shaft™
CEL1506-27QHD 02462863 1.500 1.500 6.000 1.750 1.600 4.190 27EL...
CER1006-27QHD 02462835 1.000 1.000 6.000 1.250 1.600 2.200 27ER...
CER1256-27QHD 02462837 1.250 1.250 6.000 1.500 1.732 3.090 27ER...
CER1506-27QHD 02462839 1.500 1.500 6.000 1.750 1.600 4.190 27ER...
Thread milling
CEL 1006-27.. CHD27 T20P-7L L86025-T20P VX27-1 C05012-T15P S7616
CER/L 1256-27 CHD27 T20P-7L L86025-T20P VX27-1 C05012-T15P S7616
CEL 1506-27 CHD27 T20P-7L L86025-T20P VX27-1 C05012-T15P S7616
CER 1006-27 CHD27 T20P-7L L86025-T20P VX27-1 C05012-T15P S7616
CER 1506-27.. CHD27 T20P-7L L86025-T20P VX27-1 C05012-T15P S7616
Accessories
Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim
Thread tapping
For holders (M) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) Shim key
CEL 1006-27.. MX27-1 VX27-98.5 – VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 VX27-2 T15P-2
CER/L 1256-27 MX27-1 VX27-98.5 VX27-2 VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
CEL 1506-27 MX27-1 VX27-98.5 VX27-2 VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
CER 1006-27 MX27-1 VX27-98.5 VX27-2 VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
CER 1506-27.. MX27-1 VX27-99.5 VX27-2 – VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
Annex
65
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT

155, 157, 159, 161, 163, 165, 167, 169, 171, 173, 175, 177
Designation Item number H B LF HF WF LH Weight CTWS
mm mm mm mm mm mm kg
CER2525M16CQHD 02457892 25,0 25,0 150,0 25,0 32,0 45,0 0,9 16

CER2525M22CQHD 02457895 25,0 25,0 150,0 25,0 32,0 50,0 0,9 22
Mini-Shaft™
CER3232P16CQHD 02457893 32,0 32,0 170,0 32,0 40,0 45,0 1,5 16

CER3232P22CQHD 02457897 32,0 32,0 170,0 32,0 40,0 50,0 1,5 22
Thread milling
..16CQHD CHD16 T15P-7 L85020-T15P GX16-1 CS3507-T09P S6912

..22CQHD CHD22 T20P-7L L86025-T20P NX22-1 CS4009-T15P S7616
Accessories
For holders Insert shim (M) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Shim key
..16CQHD MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2

Thread tapping
..22CQHD MX22-1 NX22-0 NX22-2 NX22-3 NX22-4 NX22-98 NX22-99 T15P-2

Annex
66
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT
155, 157, 159, 161, 163, 165, 167, 169, 171, 173, 175, 177
Designation Item number H B LF WF LH HF Weight CTWS
Inch Inch Inch Inch Inch Inch lbs
CEL1006-16CQHD 02462864 1.000 1.000 6.000 1.250 2.000 1.000 1.540 16EL..
CER1006-16CQHD 02467118 1.000 1.000 6.000 1.250 2.000 1.000 1.540 16ER..
Mini-Shaft™
CER1006-22CQHD 02462842 1.000 1.000 6.000 1.250 2.000 1.000 2.200 22ER..
CER1006-27CQHD 02462847 1.000 1.000 6.000 1.250 2.000 1.000 2.200 27ER..
CER1256-16CQHD 02462840 1.250 1.250 6.000 1.250 2.500 1.250 3.090 16ER..
For holders Cantilever clamp Clamp key Clamp screw Insert shim (S) Screw Shim screw Spring
Thread milling
CEL 1006-16.. CHD16 T15P-7 L85020-T15P GX16-1 – CS3507-T09P S6912
CER 1006-16.. CHD16 T15P-7 L85020-T15P GX16-1 – CS3507-T09P S6912
..22CQHD CHD22 T20P-7L L86025-T20P NX22-1 S7616 CS4009-T15P –
..27CQHD CHD27 T20P-7L L86025-T20P VX27-1 – C05012-T15P S7616
CER 1256-16.. CHD16 T15P-7 L85020-T15P GX16-1 – CS3507-T09P S6912
Accessories
Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim Insert shim
For holders (M) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) (S) Shim key
Thread tapping
CEL 1006-16.. MX16-1 – GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
CER 1006-16.. MX16-1 GX16-99 – – – – – – – – – – – T09P-2
..22CQHD MX22-1 – NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
..27CQHD MX27-1 – VX27-98.5 VX27-2 – VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
CER 1256-16.. MX16-1 – GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
Annex
67
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT

149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 171
CER0505-16Q-S 02508066 0.500 0.500 5.000 0.630 0.840 0.440 16ER..

CER06255-16Q-S 02508068 0.625 0.625 5.000 0.750 0.840 0.880 16ER..
Mini-Shaft™
For holders Clamp key Clamp kit Insert shim (S) Shim screw
..16Q-S T15P-2 CSP16-T15P GX16-1 CS3507-T09P
Accessories
Thread milling
..16Q-S MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2

Thread tapping
Annex
68
www.secotools.com
Thread turning
Toolholders
For K-inserts, Snap-Tap®
Thread turning
MDT
• For inserts program, see page(s) 161, 163, 165
mm mm mm mm mm kg
CEL2525M20QHD 02528503 25,0 25,0 150,0 32,0 34,0 0,8 20

CEL2525M26QHD 02528511 25,0 25,0 150,0 40,0 44,0 0,9 26
Mini-Shaft™
CEL3225P20QHD 02528505 32,0 25,0 170,0 32,0 34,0 1,1 20
CEL3225P26QHD 02528513 32,0 25,0 170,0 40,0 44,0 1,2 26
CEL3232P20QHD 02528508 32,0 32,0 170,0 40,0 34,0 1,4 20
CEL3232P26QHD 02528517 32,0 32,0 170,0 40,0 44,0 1,4 26
CER2525M20QHD 02528502 25,0 25,0 150,0 32,0 34,0 0,8 20
CER2525M26QHD 02528509 25,0 25,0 150,0 40,0 44,0 0,9 26
CER3225P20QHD 02528504 32,0 25,0 170,0 32,0 34,0 1,1 20
CER3225P26QHD 02528512 32,0 25,0 170,0 40,0 44,0 1,2 26
Thread milling
CER3232P20QHD 02528507 32,0 32,0 170,0 40,0 34,0 1,4 20
CER3232P26QHD 02528516 32,0 32,0 170,0 40,0 44,0 1,4 26
CER4040R20HD 02853577 40,0 40,0 200,0 42,0 35,0 2,6 20
CER4040R26HD 02853578 40,0 40,0 200,0 42,0 45,0 2,5 26
For holders Cantilever clamp Clamp key Clamp screw Insert shim (K) Shim screw Spring
Thread tapping
..20 CHD22 T20P-7 L86025-T20P KX20-2 CS4009-T15P S7616

..26 CHD27 T20P-7 L86025-T20P KX26-2 C05012-T15P S7616
...20 CHD22 T20P-7 L86025-T20P KX20-2 CS4009-T15P S7616
...26 CHD27 T20P-7 L86025-T20P KX26-2 C05012-T15P S7616
Accessories
For holders Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Shim key
Annex
..20 KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2

..26 KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2
...20 KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2
...26 KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2
69
www.secotools.com
Thread turning
Toolholders
Toolholders, internal
Thread turning
SNR...09A SNR/L
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
Designation Item number H B LF WF LU DCINN DCINN2 Weight CTWS
mm mm mm mm mm mm mm kg
SNL0010H11 75025415 – 9,5 100,0 7,5 – 13,0 11,0 0,1 11

Mini-Shaft™
SNL0010K11 75025250 14,0 15,5 125,0 6,5 30,0 12,0 11,0 0,2 11
SNL0013L11 75025248 14,0 15,5 140,0 8,0 32,0 15,0 13,0 0,2 11
SNL0016M16 75025243 14,0 15,5 150,0 10,3 40,0 19,0 16,0 0,3 16
SNL0020Q22 75025416 18,0 19,0 180,0 13,0 45,0 24,0 22,0 0,4 22
SNR0010H11 75029184 – 9,5 100,0 7,5 – 13,0 11,0 0,1 11
SNR0010K11 75025251 14,0 15,5 125,0 6,5 30,0 12,0 11,0 0,2 11
SNR0013L11 75025249 14,0 15,5 140,0 8,0 32,0 15,0 13,0 0,2 11
SNR0016M16 75025244 14,0 15,5 150,0 10,3 40,0 19,0 16,0 0,3 16
SNR0020L09A 75069222 18,0 19,0 140,0 5,1 20,0 10,2 – 0,3 09
Thread milling
SNR0020Q22 75025414 18,0 19,0 180,0 13,0 45,0 24,0 22,0 0,4 22
For holders Insert key Insert screw
...11 T07P-2 C02506-T07P

...16 T15P-2 C03508-T15P
Thread tapping
...22 T15P-2 C04011-T15P

...09A T07P-2 C02205-T07P
DCINN2, modified. Please see page 36

Annex
70
www.secotools.com
Thread turning
Toolholders
Thread turning
CNR/L...AHD CNR/L...APIHD
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
Designation Item number H B LF WF LH DMM DCINN DCINN2 Weight CTWS
mm mm mm mm mm mm mm mm kg
CNL0020P16AHD 02555907 18,0 19,0 171,0 11,78 41,0 20,0 24,0 – 0,4 16..
Mini-Shaft™
CNL0025R16AHD 02555908 23,0 24,0 171,0 11,78 40,0 25,0 29,0 26,0 0,7 16..
CNL0025R22AHD 02556104 23,0 24,0 200,0 17,8 45,0 25,0 30,0 – 0,7 22..
CNL0032S16AHD 02555909 30,0 31,0 250,0 19,8 47,0 32,0 36,0 32,0 1,4 16..
CNL0032S22AHD 02556106 30,0 31,0 250,0 21,3 46,0 32,0 38,0 32,0 1,4 22..
CNL0040T16AHD 02555910 37,0 38,5 300,0 23,8 47,0 40,0 44,0 40,0 2,6 16..
CNL0040T22AHD 02556107 37,0 38,5 300,0 25,3 53,0 40,0 46,0 40,0 2,6 22..
CNL0040T27AHD 02556122 37,0 38,5 300,0 26,8 62,0 40,0 48,0 44,0 2,6 27..
CNL0050U22AHD 02556108 47,0 48,5 350,0 30,3 51,0 50,0 56,0 50,0 4,8 22..
CNL0050U27AHD 02556130 47,0 48,5 350,0 31,8 61,0 50,0 58,0 50,0 4,8 27..
Thread milling
CNL0063T22APIHD 02817100 60,0 61,5 300,0 22,6 119,0 63,0 50,5 – 5,4 22..
CNL0063T27APIHD 02817105 60,0 61,5 300,0 23,1 119,0 63,0 50,5 – 5,4 27..
CNR0020P16AHD 02555888 18,0 19,0 170,0 13,8 41,0 20,0 24,0 – 0,4 16..
CNR0025R16AHD 02555891 23,0 24,0 200,0 16,3 40,0 25,0 29,0 26,0 0,8 16..
CNR0025R22AHD 02555913 23,0 24,0 200,0 17,8 45,0 25,0 30,0 – 0,7 22..
CNR0032S16AHD 02555895 30,0 31,0 250,0 19,8 47,0 32,0 36,0 32,0 1,4 16..
CNR0032S22AHD 02555919 30,0 31,0 250,0 21,3 46,0 32,0 38,0 32,0 1,5 22..
CNR0040T16AHD 02555900 37,0 38,5 300,0 23,8 47,0 40,0 44,0 40,0 2,6 16..
CNR0040T22AHD 02556097 37,0 38,5 300,0 25,3 53,0 40,0 46,0 40,0 2,6 22..
Thread tapping
CNR0040T27AHD 02556109 37,0 38,5 300,0 26,8 62,0 40,0 48,0 44,0 2,6 27..
CNR0050T22APIHD 02556244 47,0 48,5 300,0 20,5 114,0 50,0 49,0 – 3,7 22..
CNR0050U16AHD 02555906 47,0 48,5 350,0 28,8 45,0 50,0 54,0 50,0 4,8 16..
CNR0050U22AHD 02556101 47,0 48,5 350,0 30,3 51,0 50,0 56,0 50,0 4,8 22..
CNR0050U27AHD 02556110 47,0 48,5 350,0 31,8 61,0 50,0 58,0 50,0 4,8 27..
CNR0063T22APIHD 02817098 60,0 61,5 300,0 22,6 119,0 63,0 50,5 – 5,4 22..
CNR0063T27APIHD 02817102 60,0 61,5 300,0 23,1 119,0 63,0 50,5 – 5,6 27..
CNR0063V22AHD 02556102 60,0 61,5 400,0 36,8 56,0 63,0 69,0 63,0 9,0 22..
CNR0063V27AHD 02556120 60,0 61,5 400,0 38,3 70,0 63,0 70,0 63,0 8,9 27..
Annex
71
www.secotools.com
Thread turning
Toolholders
Thread turning
..P, ..R16AHD – T15P-2 CSP16HD-T15P – GX16-1 CS3507-T09P –

...R22, ...S22 – T15P-2 CSP22HD-T15P – NX22-1 CS4009-T15P –
..S, ..T, ..U16AHD CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912
...T22, ...U22, ...V22 CHD22 T20P-7L – L86025-T20P NX22-1 CS4009-T15P S7616
..27.. CHD27 T20P-7L – L86025-T20P VX27-1 C05012-T15P S7616
Accessories
MDT
..P, ..R16AHD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
...R22, ...S22 MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 –
..S, ..T, ..U16AHD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
...T22, ...U22, ...V22 MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
..27.. MX27-1 VX27-98.5 VX27-2 – VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
Mini-Shaft™

Thread milling
Thread tapping
Annex
72
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
Designation Item number DMM H B LF WF LH DCINN DCINN2 Weight CTWS
Inch Inch Inch Inch Inch Inch Inch Inch lbs
CNL000757-16AHD 02562790 0.750 0.650 0.707 6.693 0.520 1.181 0.950 0.800 0.880 16..
Mini-Shaft™
CNL001008-16AHD 02562791 1.000 0.902 0.957 7.874 0.650 2.126 1.150 1.000 1.540 16..
CNL0012510-16AHD 02562792 1.250 1.150 1.209 9.843 0.780 1.811 1.400 1.200 3.090 16..
CNL0015012-16AHD 02562793 1.500 1.339 1.427 11.811 0.898 1.811 1.700 1.500 5.070 16..
CNL0017514-16AHD 02562794 1.750 1.591 1.677 13.780 1.028 2.165 2.000 1.800 8.160 16..
CNL0020014-16AHD 02562795 2.000 1.843 1.929 13.780 1.150 2.244 2.200 2.000 10.800 16..
CNR000757-16AHD 02562574 0.750 0.650 0.707 6.693 0.520 1.181 0.950 0.800 0.880 16..
CNR001008-16AHD 02562785 1.000 0.902 0.957 7.874 0.650 2.126 1.150 1.000 1.540 16..
CNR0012510-16AHD 02562786 1.250 1.150 1.209 9.843 0.780 1.811 1.400 1.200 3.090 16..
CNR0015012-16AHD 02562787 1.500 1.339 1.427 11.811 0.898 1.811 1.700 1.500 5.070 16..
Thread milling
CNR0017514-16AHD 02562788 1.750 1.591 1.677 13.780 1.028 2.165 2.000 1.800 8.160 16..
CNR0020014-16AHD 02562789 2.000 1.843 1.929 13.780 1.150 2.244 2.200 2.000 10.800 16..
CNR/L..0757..1008.. – T15P-2 CSP16HD-T15P – GX16-1 CS3507-T09P –

Thread tapping
CNL..2510.. CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912

CNR/L..0014.. CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912
CNR..2510.. CHD16 T15P-7 – L85020-T15P GX16-1 CS3507-T09P S6912
CNR..5012.. CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912
CNR..7514.. CHD16 – – L85020-T15P GX16-1 CS3507-T09P S6912
Annex
73
www.secotools.com
Thread turning
Toolholders
Accessories
Thread turning
CNR/L..0757..1008.. MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2

CNL..2510.. MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
CNL..5012.. MX16-1 GX16-0 GX16-2 GX16-4 GX16-98 GX16-99 – T09P-2
CNL..7514.. MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
CNR/L..0014.. MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
CNR..2510.. MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
MDT

Mini-Shaft™
Thread milling
Thread tapping
Annex
74
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174, 176,
178
CNL001008-22AHD 02562803 1.000 0.902 0.957 7.917 0.709 1.736 1.200 1.000 1.760 22..
Mini-Shaft™
CNL0012510-22AHD 02562804 1.250 1.150 1.209 9.843 0.839 2.126 1.500 1.200 3.090 22..
CNL0015012-22AHD 02562805 1.500 1.339 1.427 11.811 1.183 2.126 1.800 1.800 5.290 22..
CNL0017514-22AHD 02562806 1.750 1.591 1.677 13.780 1.091 2.126 2.100 1.800 8.380 22..
CNL0020014-22AHD 02562807 2.000 1.843 1.929 13.780 1.209 2.323 2.300 2.000 11.020 22..
CNL0025016-22AHD 02562808 2.500 2.343 2.429 15.748 1.457 2.402 2.800 2.500 20.060 22..
CNR001008-22AHD 02562797 1.000 0.902 0.957 7.917 0.709 1.736 1.200 1.000 2.870 22..
CNR0012510-22AHD 02562798 1.250 1.150 1.209 9.843 0.839 2.126 1.500 1.200 3.090 22..
CNR0015012-22AHD 02562799 1.500 1.339 1.427 11.811 0.969 2.126 1.800 1.800 5.070 22..
CNR0017514-22AHD 02562800 1.750 1.591 1.677 13.780 1.091 2.126 2.100 1.800 8.160 22..
Thread milling
CNR0020014-22AHD 02562801 2.000 1.843 1.929 13.780 1.209 2.323 2.300 2.000 11.020 22..
CNR00200T22APIHD 02562815 2.000 1.843 1.929 12.000 0.880 5.000 1.600 – 8.380 22..
CNR0025016-22AHD 02562802 2.500 2.343 2.429 15.748 1.457 2.402 2.800 2.500 20.280 22..
CNR00250T22APIHD 02562816 2.500 2.343 2.429 12.000 0.880 5.000 1.600 – 11.900 22..
For holders Cantilever clamp Clamp key Clamp kit Clamp screw Insert shim (S) Shim/clamp key Shim screw Spring
Thread tapping
CNL..1008..2510.. – T15P-2 CSP22HD-T15P – NX22-1 – CS4009-T15P –

CNR/L..5012..5016.. CHD22 T20P-7L – L86025-T20P NX22-1 – CS4009-T15P S7616
CNR..1008..2510.. – – CSP22HD-T15P – NX22-1 T15P-2 CS4009-T15P –
CNR..200..250T.. CHD22 T20P-7L – L86025-T20P NX22-1 – CS4009-T15P S7616
Accessories
Annex
CNL..1008..2510.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 –
CNR/L..5012..5016.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
CNR..1008..2510.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 –
CNR..200..250T.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
75
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
CNL0015012-27AHD 02562812 1.500 1.339 1.427 11.811 1.020 2.441 1.900 1.500 5.290 27..
Mini-Shaft™
CNL0017514-27AHD 02562813 1.750 1.591 1.677 13.780 1.150 2.402 2.200 1.800 8.380 27..
CNL0025016-27AHD 02562814 2.500 2.343 2.429 15.748 1.520 2.756 2.900 2.500 20.280 27..
CNR0015012-27AHD 02562809 1.500 1.339 1.427 11.811 1.020 2.441 1.900 1.500 5.290 27..
CNR0017514-27AHD 02562810 1.750 1.591 1.677 13.780 1.150 2.402 2.200 1.800 8.380 27..
CNR0020014-27HD 02790281 2.000 1.843 1.929 13.780 1.346 2.283 2.362 2.000 11.460 27..
CNR00200T27APIHD 02562819 2.000 1.843 1.929 12.000 0.900 5.000 1.600 1.600 8.380 27...
CNR0025016-27AHD 02562811 2.500 2.343 2.429 15.748 1.520 2.756 2.900 2.500 20.060 27..
CNR00250T27APIHD 02562820 2.500 2.343 2.429 12.000 0.900 5.000 1.600 1.600 12.130 27...
Thread milling
CNR/L..15012-25016.. CHD27 T20P-7L L86025-T20P VX27-1 C05012-T15P S7616

CNR..200..250T.. CHD27 T20P-7 L86025-T20P VX27-1 C05012-T15P S7616
Accessories
Thread tapping
CNR/L..15012-25016.. MX27-1 VX27-98.5 VX27-2 VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
CNR..200..250T.. MX27-1 VX27-98.5 VX27-2 VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2

Annex
76
www.secotools.com
Thread turning
Toolholders
Thread turning
SNR...09A SNR/L
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
Designation Item number DMM H B LF WF LU Weight CTWS
SNL00037540-11 00072403 0.375 0.336 0.350 4.000 0.285 – 0.220 11NL..
Mini-Shaft™
SNL00062555-11 00072405 0.625 0.441 0.470 5.500 0.315 – 0.660 11NL..
SNL00062560-16 00072407 0.625 0.566 0.587 6.000 0.406 – 0.660 16NL..
SNL0007570-22 00072411 0.750 0.691 0.707 7.000 0.492 – 0.880 22NL..
SNR000375-40-11 00072380 0.375 0.336 0.350 4.000 0.285 – 0.220 11NR..
SNR000375-60-11H 00072376 0.375 0.336 0.350 6.000 0.285 – 0.440 11NR..
SNR00062555-11 00072332 0.625 0.441 0.470 5.500 0.315 1.250 0.660 11NR..
SNR000625-60-16 00072374 0.625 0.566 0.587 6.000 0.406 – 0.660 16NR..
SNR000625-80-16H 00072330 0.625 0.566 0.587 8.000 0.406 – 1.540 16NR..
SNR000750-10-22H 00072370 0.750 0.691 0.707 10.000 0.492 – 2.650 22NR..
Thread milling
SNR000750-55-09A 00086856 0.750 0.691 0.707 5.500 0.201 – 0.660 09NR..
SNR00075-70-22 00072314 0.750 0.691 0.707 7.000 0.492 – 1.100 22NR..
..11 T07P-2 C02506-T07P

Thread tapping
..16 T15P-2 C03508-T15P

..22 T15P-2 C04011-T15P
..09 T07P-2 C02205-T07P
Annex
77
www.secotools.com
Thread turning
Toolholders
Thread turning
MDT

• For inserts program, see page(s) 127, 130, 131, 162, 164, 166
Designation Item number H B LF WF LH DMM DCINN DCINN2 Weight CTWS
CNL0025R20AHD 02556134 23,0 24,0 200,0 20,5 50,0 25,0 38,0 – 0,7 20
Mini-Shaft™
CNL0032S20AHD 02556135 30,0 31,0 250,0 24,0 50,0 32,0 44,0 38,0 1,4 20
CNL0040T26AHD 02556140 37,0 38,5 300,0 31,0 60,0 40,0 55,0 50,0 2,6 26
CNR0025R20AHD 02556131 23,0 24,0 200,0 20,5 50,0 25,0 38,0 – 0,7 20
CNR0032S20AHD 02556132 30,0 31,0 250,0 24,0 50,0 32,0 44,0 38,0 1,5 20
CNR0032S26AHD 02556136 30,0 31,0 250,0 27,0 61,0 32,0 50,0 50,0 1,5 26
CNR0040T20AHD 02556133 37,0 38,5 300,0 28,0 50,0 40,0 51,0 40,0 2,6 20
CNR0040T26AHD 02556137 37,0 38,5 300,0 31,0 60,0 40,0 55,0 50,0 2,6 26
CNR0050U26AHD 02556138 47,0 48,5 350,0 36,0 62,0 50,0 65,0 – 4,8 26
CNR0063V26AHD 02556139 60,0 61,5 400,0 42,5 64,0 63,0 80,0 63,0 8,9 26
Thread milling
..20 CHD22 T20P-7L L86025-T20P KX20-2 CS4009-T15P S7616

..26 CHD27 T20P-7L L86025-T20P KX26-2 C05012-T15P S7616
Accessories
Thread tapping
..20 KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2

..26 KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2

Annex
78
www.secotools.com
Thread turning
Toolholders
Seco-Capto™ – Toolholders, external

Thread turning
CER/L-..HD CER/L-..CHD
MDT
149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, 175, 177
Designation Item number DCSFMS LF WF Weight CTWS
mm mm mm kg
Inch Inch Inch lbs
40,0 50,0 27,0 0,5

C4-CEL-27050-16HD 02484655 16..
1.575 1.063 1.063 1.100
Mini-Shaft™
40,0 50,0 27,0 0,5
C4-CEL-27050-22HD 02484656 22..
1.575 1.063 1.063 1.100
40,0 50,0 27,0 0,5
C4-CER-27050-16HD 02484547 16..
1.575 1.063 1.063 1.100
40,0 50,0 27,0 0,5
C4-CER-27050-22HD 02484649 22..
1.575 1.063 1.063 1.100
50,0 60,0 35,0 0,8
C5-CEL-35060-16HD 02484657 16..
1.969 1.378 1.378 1.760
50,0 60,0 35,0 0,8
C5-CEL-35060-22HD 02484658 22..
1.969 1.378 1.378 1.760
Thread milling
50,0 60,0 35,0 0,8
C5-CEL-35060-27HD 02844420 27..
1.969 1.378 1.378 1.760
50,0 60,0 35,0 0,8
C5-CER-35060-16HD 02484650 16..
1.969 1.378 1.378 1.760
50,0 60,0 35,0 0,8
C5-CER-35060-22HD 02484652 22..
1.969 1.378 1.378 1.760
50,0 60,0 35,0 0,8
C5-CER-35060-27HD 02844418 27..
1.969 1.378 1.378 1.760
63,0 65,0 45,0 1,3
C6-CEL-45065-16HD 02484661 16..
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CEL-45065-22HD 02484663 22..
Thread tapping
2.480 1.772 1.772 2.870

63,0 65,0 45,0 1,3
C6-CEL-45065-27HD 02484860 27..
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CER-45065-16HD 02484653 16..
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CER-45065-22HD 02484654 22..
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CER-45065-27HD 02484848 27..
2.480 1.772 1.772 2.870
Annex
79
www.secotools.com
Thread turning
Toolholders
For holders Cantilever clamp Clamp key Clamp screw Coolant nozzle Insert shim (S) Shim screw Spring
Thread turning
...16HD CHD16 T15P-7 L85020-T15P CN16 GX16-1 CS3507-T09P S6912

...22HD CHD22 T20P-7L L86025-T20P CN16 NX22-1 CS4009-T15P S7616
...27HD CHD27 T20P-7L L86025-T20P CN16 VX27-1 C05012-T15P S7616
...45065-27HD CHD27 T20P-7L L86025-T20P CN16 VX27-1 C05012-T15P S7616
Accessories
MDT

...45065-27HD MX27-1 VX27-98.5 VX27-2 – VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
Mini-Shaft™
Thread milling
Thread tapping
Annex
80
www.secotools.com
Thread turning
Toolholders

Thread turning
CER/L-..HD CER/L-..CHD
MDT
149, 150, 153, 155, 157, 159, 161, 163, 165, 167
mm mm mm kg
Inch Inch Inch lbs
40,0 50,0 27,0 0,5

C4-CEL-27050-16CHD 02484795 16
1.575 1.063 1.063 1.100
Mini-Shaft™
40,0 50,0 27,0 0,5
C4-CEL-27050-22CHD 02484800 22
1.575 1.063 1.063 1.100
40,0 50,0 27,0 0,5
C4-CER-27050-16CHD 02484668 16
1.575 1.063 1.063 1.100
40,0 50,0 27,0 0,5
C4-CER-27050-22CHD 02484775 22
1.575 1.063 1.063 1.100
50,0 60,0 35,0 0,8
C5-CEL-35060-16CHD 02484802 16
1.969 1.378 1.378 1.760
50,0 60,0 35,0 0,8
C5-CEL-35060-22CHD 02484804 22
1.969 1.378 1.378 1.760
Thread milling
50,0 60,0 35,0 0,8
C5-CER-35060-16CHD 02484784 16
1.969 1.378 1.378 1.760
50,0 60,0 35,0 0,8
C5-CER-35060-22CHD 02484785 22
1.969 1.378 1.378 1.760
63,0 65,0 45,0 1,3
C6-CEL-45065-16CHD 02484843 16
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CEL-45065-22CHD 02484845 22
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CEL-45065-27CHD 02484862 27
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CER-45065-16CHD 02484786 16
Thread tapping
2.480 1.772 1.772 2.870

63,0 65,0 45,0 1,3
C6-CER-45065-22CHD 02484790 22
2.480 1.772 1.772 2.870
63,0 65,0 45,0 1,3
C6-CER-45065-27CHD 02484854 27
2.480 1.772 1.772 2.870
Annex
...16CHD CHD16 T15P-7 L85020-T15P CN16 GX16-1 CS3507-T09P S6912

...22CHD CHD22 T20P-7L L86025-T20P CN16 NX22-1 CS4009-T15P S7616
...27CHD CHD27 T20P-7L L86025-T20P CN16 VX27-1 C05012-T15P S7616
81
www.secotools.com
Thread turning
Toolholders
Accessories
Thread turning
...16CHD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2

...22CHD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
...27CHD MX27-1 VX27-98.5 VX27-2 – VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
82
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT
mm mm mm kg
Inch Inch Inch lbs
40,0 60,0 27,0 0,6

C4-CER-27060-20HD 02853589 20..
1.575 1.063 1.063 1.320
Mini-Shaft™
40,0 65,0 27,0 0,6
C4-CER-27065-26HD 02853590 26..
1.575 1.063 1.063 1.320
50,0 60,0 35,0 0,8
C5-CER-35060-20HD 02853591 20..
1.969 1.378 1.378 1.760
50,0 65,0 35,0 0,8
C5-CER-35065-26HD 02790776 26..
1.969 1.378 1.378 1.760
63,0 65,0 45,0 1,3
C6-CER-45065-20HD 02853587 20..
2.480 1.772 1.772 2.870
63,0 70,0 45,0 1,5
C6-CER-45070-26HD 02853595 26..
2.480 1.772 1.772 3.310
Thread milling
For holders Cantilever clamp Clamp key Clamp screw Coolant nozzle Insert shim (K) Shim screw Spring
...20HD CHD22 T20P-7 L86025-T20P CN6 KX20-2 CS4009-T15P S7616

...26HD CHD27 T20P-7 L86025-T20P CN6 KX26-2 C05012-T15P S7616
Accessories
Thread tapping
...20HD KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2

...26HD KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2
Annex
83
www.secotools.com
Thread turning
Toolholders
Seco-Capto™ – Toolholders, internal

Thread turning
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
Designation Item number BD DCSFMS LF WF DCINN LU Weight CTWS
20,0 40,0 60,0 13,8 24,0 36,0 0,4

C4-CNL-14060-16HD 02555337 16..
0.787 1.575 2.362 0.543 0.945 1.417 0.880
Mini-Shaft™
25,0 40,0 70,0 16,3 29,0 48,0 0,5

C4-CNL-17070-16HD 02555331 16..
0.984 1.575 2.756 0.642 1.142 1.890 1.100
32,0 40,0 90,0 19,8 36,0 69,0 0,7
C4-CNL-20090-16HD 02555371 16..
1.260 1.575 3.543 0.780 1.417 2.717 1.540
32,0 40,0 90,0 21,3 38,0 69,0 0,6
C4-CNL-22090-22HD 02555384 22..
1.260 1.575 3.543 0.839 1.496 2.717 1.320
20,0 40,0 60,0 13,8 24,0 36,0 0,4
C4-CNR-14060-16HD 02555280 16..
0.787 1.575 2.362 0.543 0.945 1.417 0.880
25,0 40,0 70,0 16,3 29,0 48,0 0,5
C4-CNR-17070-16HD 02555284 16..
0.984 1.575 2.756 0.642 1.142 1.890 1.100
Thread milling
32,0 40,0 90,0 19,8 36,0 69,0 0,7

C4-CNR-20090-16HD 02555320 16..
1.260 1.575 3.543 0.780 1.417 2.717 1.540
32,0 40,0 90,0 21,3 38,0 69,0 0,6
C4-CNR-22090-22HD 02555375 22..
1.260 1.575 3.543 0.839 1.496 2.717 1.320
16,0 40,0 60,0 10,0 19,0 37,0 0,3
C4-SNR-10060-16 00008610 16..
0.630 1.575 2.362 0.394 0.748 1.457 0.660
For holders Cantilever clamp Clamp key Clamp kit Clamp screw Insert key Insert screw Insert shim (S) Shim screw Spring
Thread tapping
...14060, 17070-16HD – T15P-2 CSP16HD-T15P – – – GX16-1 CS3507-T09P –

...20090-16HD CHD16 T15P-2 – L85020-T15P – – GX16-1 CS3507-T09P S6912
...22090-22HD – T15P-2 CSP22HD-T15P – – – NX22-1 CS4009-T15P –
...10060-16 – – – – T15P-2 C03508-T15P – – –
Annex
84
www.secotools.com
Thread turning
Toolholders
Accessories
Thread turning
...14060,
MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
17070-16HD
...20090-16HD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
...22090-22HD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 –
...10060-16 – – – – – – – – – – – – –
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
85
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
20,0 50,0 60,0 13,8 24,0 36,0 0,6

C5-CNL-14060-16HD 02555739 16..
0.787 1.969 2.362 0.543 0.945 1.417 1.320
Mini-Shaft™
25,0 50,0 70,0 16,3 29,0 47,0 0,6

C5-CNL-17070-16HD 02555740 16..
0.984 1.969 2.756 0.642 1.142 1.850 1.320
25,0 50,0 70,0 17,8 30,0 47,0 0,6
C5-CNL-18070-22HD 02555745 22..
0.984 1.969 2.756 0.701 1.181 1.850 1.320
32,0 50,0 90,0 19,8 36,0 68,0 0,8
C5-CNL-20090-16HD 02555741 16..
1.260 1.969 3.543 0.780 1.417 2.677 1.760
32,0 50,0 90,0 21,3 38,0 68,0 0,8
C5-CNL-22090-22HD 02555747 22..
1.260 1.969 3.543 0.839 1.496 2.677 1.760
40,0 50,0 105,0 24,78 46,0 83,7 1,2
C5-CNL-26105-27HD 02823807 27..
1.575 1.969 4.134 0.976 1.811 3.295 2.650
Thread milling
20,0 50,0 60,0 13,8 24,0 36,0 0,6

C5-CNR-14060-16HD 02555383 16..
0.787 1.969 2.362 0.543 0.945 1.417 1.320
25,0 50,0 70,0 16,3 29,0 47,0 0,6
C5-CNR-17070-16HD 02555388 16..
0.984 1.969 2.756 0.642 1.142 1.850 1.320
25,0 50,0 70,0 17,8 30,0 47,0 0,6
C5-CNR-18070-22HD 02555742 22..
0.984 1.969 2.756 0.701 1.181 1.850 1.320
32,0 50,0 90,0 19,8 36,0 68,0 0,8
C5-CNR-20090-16HD 02555391 16..
1.260 1.969 3.543 0.780 1.417 2.677 1.760
32,0 50,0 90,0 21,3 38,0 68,0 0,8
C5-CNR-22090-22HD 02555743 22..
1.260 1.969 3.543 0.839 1.496 2.677 1.760
40,0 50,0 105,0 24,78 46,0 83,7 1,2
C5-CNR-26105-27HD 02823806 27..
Thread tapping
1.575 1.969 4.134 0.976 1.811 3.295 2.650
...14060, 17070-16HD – T15P-2 CSP16HD-T15P – GX16-1 CS3507-T09P –

...22HD – T15P-2 CSP22HD-T15P – NX22-1 CS4009-T15P –
...20090-16HD CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912
...27HD CHD27 T20P-7 – L86025-T20P VX27-1 C05012-T15P S7616
Annex
86
www.secotools.com
Thread turning
Toolholders
Accessories
Thread turning
...14060,
17070-16HD
...20090-16HD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
87
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 174
25,0 63,0 75,0 16,3 29,0 53,0 0,9

C6-CNL-17075-16HD 02555768 16
0.984 2.480 2.953 0.642 1.142 2.087 1.980
Mini-Shaft™
32,0 63,0 90,0 19,8 36,0 68,0 1,1

C6-CNL-20090-16HD 02555769 16
1.260 2.480 3.543 0.780 1.417 2.677 2.430
40,0 63,0 105,0 23,8 44,0 80,0 1,5
C6-CNL-24105-16HD 02555771 16
1.575 2.480 4.134 0.937 1.732 3.150 3.310
25,0 63,0 75,0 16,3 29,0 53,0 0,9
C6-CNR-17075-16HD 02555750 16
0.984 2.480 2.953 0.642 1.142 2.087 1.980
32,0 63,0 90,0 19,8 36,0 68,0 1,1
C6-CNR-20090-16HD 02555762 16
1.260 2.480 3.543 0.780 1.417 2.677 2.430
40,0 63,0 105,0 23,8 44,0 80,0 1,5
C6-CNR-24105-16HD 02555766 16
1.575 2.480 4.134 0.937 1.732 3.150 3.310
Thread milling
...17075-16HD – T15P-2 CSP16HD-T15P – GX16-1 CS3507-T09P –

...20090, 24105-16HD CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912
Accessories
Thread tapping
...17075-16HD MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2

...20090,
MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 T09P-2
24105-16HD
Annex
88
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT
146, 148, 151, 152, 156, 160, 162, 164, 166, 168, 170, 172, 176, 178
25,0 63,0 75,0 17,8 30,0 53,0 0,9

C6-CNL-18075-22HD 02555777 22
0.984 2.480 2.953 0.701 1.181 2.087 1.980
Mini-Shaft™
32,0 63,0 90,0 21,3 38,0 68,0 1,1
C6-CNL-22090-22HD 02555832 22
1.260 2.480 3.543 0.839 1.496 2.677 2.430
40,0 63,0 105,0 25,3 46,0 80,0 1,5
C6-CNL-26105-22HD 02555833 22
1.575 2.480 4.134 0.996 1.811 3.150 3.310
25,0 63,0 75,0 17,8 30,0 53,0 0,9
C6-CNR-18075-22HD 02555772 22
0.984 2.480 2.953 0.701 1.181 2.087 1.980
32,0 63,0 90,0 21,3 38,0 68,0 1,1
C6-CNR-22090-22HD 02555773 22
1.260 2.480 3.543 0.839 1.496 2.677 2.430
40,0 63,0 105,0 25,3 46,0 80,0 1,5
C6-CNR-26105-22HD 02555776 22
1.575 2.480 4.134 0.996 1.811 3.150 3.310
Thread milling
..18075, 22090.. – T15P-2 CSP22HD-T15P – NX22-1 CS4009-T15P –

..26105.. CHD22 T20P-7L – L86025-T20P NX22-1 CS4009-T15P S7616
Accessories
Thread tapping
..18075, 22090.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
..26105.. MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
Annex
89
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT

• For inserts program, see page(s) 135, 136, 137 142, 143, 144, 160, 162, 164,
166, 168, 170, 172, 174
40,0 63,0 105,0 25,3 46,0 77,0 1,6

C6-CNL-26105-27HD 02644672 27
1.575 2.480 4.134 0.996 1.811 3.031 3.530
Mini-Shaft™
63,0 63,0 182,0 36,0 70,0 4,1

C6-CNL-36182-27HD 02644681 – 27
2.480 2.480 7.165 1.417 2.756 9.040
40,0 63,0 105,0 25,3 46,0 77,0 1,6
C6-CNR-26105-27HD 02644670 27
1.575 2.480 4.134 0.996 1.811 3.031 3.530
63,0 63,0 182,0 36,0 70,0 4,1
C6-CNR-36182-27HD 02485584 – 27
2.480 2.480 7.165 1.417 2.756 9.040
54,0 80,0 190,0 36,0 70,0 160,0 4,2
C8-CNL-36190-27HD 02644685 27
2.126 3.150 7.480 1.417 2.756 6.299 9.260
54,0 80,0 190,0 36,0 70,0 160,0 4,2
C8-CNR-36190-27HD 02644684 27
2.126 3.150 7.480 1.417 2.756 6.299 9.260
Thread milling
C6... CHD27 T20P-7 L86025-T20P – VX27-1 C05012-T15P S7616

C8... CHD27 T20P-7 L86025-T20P CN8 VX27-1 C05012-T15P S7616
Accessories
Thread tapping
C6... MX27-1 VX27-98.5 VX27-2 VX27-99.5 VX27-0.5 VX27-1.5 VX27-98 VX27-99 VX27-3 VX27-4 VX27-0 T15P-2
Annex
90
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT
146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
20,0 40,0 60,0 13,8 24,0 36,0 0,4

C4-CNL-14060-16CHD 02555835 16
0.787 1.575 2.362 0.543 0.945 1.417 0.880
Mini-Shaft™
20,0 40,0 60,0 13,8 24,0 36,0 0,4
C4-CNR-14060-16CHD 02555834 16
0.787 1.575 2.362 0.543 0.945 1.417 0.880
25,0 50,0 70,0 16,3 29,0 47,0 0,6
C5-CNL-17070-16CHD 02555839 16
0.984 1.969 2.756 0.642 1.142 1.850 1.320
25,0 50,0 70,0 17,8 30,0 47,0 0,6
C5-CNL-18070-22CHD 02555842 22
0.984 1.969 2.756 0.701 1.181 1.850 1.320
32,0 50,0 90,0 19,8 36,0 68,0 0,8
C5-CNL-20090-16CHD 02555840 16
1.260 1.969 3.543 0.780 1.417 2.677 1.760
25,0 50,0 70,0 16,3 29,0 47,0 0,6
C5-CNR-17070-16CHD 02555836 16
0.984 1.969 2.756 0.642 1.142 1.850 1.320
Thread milling
25,0 50,0 70,0 17,8 30,0 47,0 0,6
C5-CNR-18070-22CHD 02555841 22
0.984 1.969 2.756 0.701 1.181 1.850 1.320
32,0 50,0 90,0 19,8 36,0 68,0 0,8
C5-CNR-20090-16CHD 02555837 16
1.260 1.969 3.543 0.780 1.417 2.677 1.760
Thread tapping
...14060,
– T15P-2 CSP16HD-T15P – GX16-1 CS3507-T09P –
...17070-16CHD
...18070-22CHD – T15P-2 CSP22HD-T15P – NX22-1 CS4009-T15P –
...20090-16CHD CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912
Accessories
Annex
...14060,
...17070-16CHD
...18070-22CHD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 –
...20090-16CHD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2
91
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174,
176, 178
32,0 63,0 90,0 19,8 36,0 68,0 1,1

C6-CNL-20090-16CHD 02555845 16
1.260 2.480 3.543 0.780 1.417 2.677 2.430
Mini-Shaft™
32,0 63,0 90,0 21,3 38,0 68,0 1,1

C6-CNL-22090-22CHD 02555850 22
1.260 2.480 3.543 0.839 1.496 2.677 2.430
40,0 63,0 105,0 23,8 44,0 80,0 1,5
C6-CNL-24105-16CHD 02555847 16
1.575 2.480 4.134 0.937 1.732 3.150 3.310
40,0 63,0 105,0 25,3 46,0 80,0 1,5
C6-CNL-26105-22CHD 02555852 22
1.575 2.480 4.134 0.996 1.811 3.150 3.310
32,0 63,0 90,0 19,8 36,0 68,0 1,1
C6-CNR-20090-16CHD 02555843 16
1.260 2.480 3.543 0.780 1.417 2.677 2.430
32,0 63,0 90,0 21,3 38,0 68,0 1,1
C6-CNR-22090-22CHD 02555848 22
1.260 2.480 3.543 0.839 1.496 2.677 2.430
Thread milling
40,0 63,0 105,0 23,8 44,0 80,0 1,5

C6-CNR-24105-16CHD 02555844 16
1.575 2.480 4.134 0.937 1.732 3.150 3.310
40,0 63,0 105,0 25,3 46,0 80,0 1,5
C6-CNR-26105-22CHD 02555849 22
1.575 2.480 4.134 0.996 1.811 3.150 3.310
Thread tapping
...16CHD CHD16 T15P-2 – L85020-T15P GX16-1 CS3507-T09P S6912

...22090-22CHD – T15P-2 CSP22HD-T15P – NX22-1 CS4009-T15P –
...26105-22CHD CHD22 T20P-7L – L86025-T20P NX22-1 CS4009-T15P S7616
Accessories
...16CHD MX16-1 GX16-0 – – GX16-2 GX16-3 GX16-4 GX16-98 GX16-99 – – – T09P-2

Annex
...22090-22CHD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
...26105-22CHD MX22-1 NX22-97.5 NX22-98 NX22-99 NX22-98.5 NX22-99.5 NX22-0.5 NX22-1.5 NX22-0 NX22-2 NX22-3 NX22-4 T15P-2
92
www.secotools.com
Thread turning
Toolholders

Thread turning
MDT
166, 168, 170, 172, 174
40,0 63,0 105,0 25,3 46,0 80,0 1,5

C6-CNL-26105-27CHD 02644677 27
1.575 2.480 4.134 0.996 1.811 3.150 3.310
Mini-Shaft™
63,0 63,0 182,0 36,0 70,0 4,1
C6-CNL-36182-27CHD 02644687 – 27
2.480 2.480 7.165 1.417 2.756 9.040
40,0 63,0 105,0 25,3 46,0 80,0 1,5
C6-CNR-26105-27CHD 02644674 27
1.575 2.480 4.134 0.996 1.811 3.150 3.310
63,0 63,0 182,0 36,0 70,0 4,1
C6-CNR-36182-27CHD 02644686 – 27
2.480 2.480 7.165 1.417 2.756 9.040
Thread milling
C6... CHD27 T20P-7 L86025-T20P VX27-1 C05012-T15P S7616
Accessories
Thread tapping
Annex
93
www.secotools.com
Thread turning
Toolholders
Seco-Capto™ – Toolholders for MTM

Thread turning
MDT

149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, 175, 177
mm mm mm kg
Inch Inch Inch lbs
63,0 100,0 12,0 1,6

C6-CER-12100-27HD 02509304 27
2.480 3.937 0.472 3.530
Mini-Shaft™
63,0 100,0 16,0 1,6

C6-CER-16100-22HD 02509303 22
2.480 3.937 0.630 3.530
63,0 100,0 18,0 1,6
C6-CER-18100-16HD 02509302 16
2.480 3.937 0.709 3.530
Thread milling
...27HD CHD27 T20P-7L L86025-T20P CN3 VX27-1 C05012-T15P S7616

...22HD CHD22 T20P-7L L86025-T20P CN8 NX22-1 CS4009-T15P S7616
...16HD CHD16 T15P-7 L85020-T15P CN8 GX16-1 CS3507-T09P S6912
Accessories
Thread tapping
Annex
94
www.secotools.com
Thread turning
Toolholders
Seco-Capto™ – Toolholders for MTM

Thread turning
MDT
• Left-hand version shown
Designation Item number DCSFMS LF WF Weight BAWS° CTWS
mm mm mm kg
Inch Inch Inch lbs
63,0 110,0 7,0 1,7

C6-CEL-07110-26HD 02509309 45 26..
2.480 4.331 0.276 3.750
Mini-Shaft™
63,0 110,0 14,0 1,7
C6-CEL-14110-20HD 02509308 45 20..
2.480 4.331 0.551 3.750
63,0 110,0 18,0 1,7
C6-CEL-18110-14 02509306 45 14..
2.480 4.331 0.709 3.750
For holders Cantilever clamp Clamp key Clamp kit Clamp screw Coolant nozzle Insert shim (K) Shim screw Spring
Thread milling
-26 CHD27 T20P-7 – L86025-T20P CN8 KX26-2 C05012-T15P S7616
-20 CHD22 T20P-7 – L86025-T20P CN8 KX20-2 CS4009-T15P S7616
-14 – T15P-2 CSP16-T15P – CN8 KX14-2 CS3507-T09P –
Accessories
Thread tapping
-26 KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2

-20 KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2
-14 KX14-0 KX14-1 KX14-3 KX14-4 KX14-5 – T09P-2
Annex
95
www.secotools.com
Thread turning
Toolholders
Steadyline®, GL-heads, Jetstream Tooling®

Thread turning
..16AHDJET ..22/32AHDJET
MDT

146, 148, 151, 152, 154, 156, 158, 160, 162, 164, 166, 174
• CP * Max coolant pressure
Designation Item number DCSFMS LF WF DCINN CP Weight CTWS
mm mm mm mm bar kg
Inch Inch Inch Inch psi lbs
25,0 25,0 16,3 29,0 200,0 0,1

GL25-PNL-17025-16AHDJET 03212502 16
Mini-Shaft™
0.984 0.984 0.642 1.142 2900.8 0.220

25,0 25,0 16,3 29,0 200,0 0,1
GL25-PNR-17025-16AHDJET 03212499 16
0.984 0.984 0.642 1.142 2900.8 0.220
32,0 32,0 19,8 36,0 200,0 0,2
GL32-PNL-20032-16AHDJET 03007256 16
1.260 1.260 0.780 1.417 2900.8 0.440
32,0 32,0 21,3 38,0 200,0 0,1
GL32-PNL-22032-22AHDJET 03007258 22
1.260 1.260 0.839 1.496 2900.8 0.220
32,0 32,0 19,8 36,0 200,0 0,2
GL32-PNR-20032-16AHDJET 03007255 16
1.260 1.260 0.780 1.417 2900.8 0.440
32,0 32,0 21,3 38,0 200,0 0,2
GL32-PNR-22032-22AHDJET 03007257 22
1.260 1.260 0.839 1.496 2900.8 0.440
Thread milling
40,0 32,0 23,8 44,0 200,0 0,3

GL40-PNL-24032-16AHDJET 03007262 16
1.575 1.260 0.937 1.732 2900.8 0.660
40,0 32,0 25,3 46,0 200,0 0,3
GL40-PNL-26032-22AHDJET 03007468 22
1.575 1.260 0.996 1.811 2900.8 0.660
40,0 32,0 23,8 44,0 200,0 0,4
GL40-PNR-24032-16AHDJET 03007261 16
1.575 1.260 0.937 1.732 2900.8 0.880
40,0 32,0 25,3 46,0 200,0 0,3
GL40-PNR-26032-22AHDJET 03007263 22
1.575 1.260 0.996 1.811 2900.8 0.660
40,0 37,0 26,8 48,0 200,0 0,3
GL40-PNR-27037-27AHDJET 03007260 27
1.575 1.457 1.055 1.890 2900.8 0.660
50,0 32,0 28,8 54,0 200,0 0,5
Thread tapping
GL50-PNL-29032-16AHDJET 03007265 16
1.969 1.260 1.134 2.126 2900.8 1.100
50,0 32,0 30,3 56,0 200,0 0,5
GL50-PNL-31032-22AHDJET 03007267 22
1.969 1.260 1.193 2.205 2900.8 1.100
50,0 32,0 28,8 54,0 200,0 0,5
GL50-PNR-29032-16AHDJET 03007264 16
1.969 1.260 1.134 2.126 2900.8 1.100
50,0 32,0 30,3 56,0 200,0 0,4
GL50-PNR-31032-22AHDJET 03007266 22
1.969 1.260 1.193 2.205 2900.8 0.880
50,0 37,0 31,8 58,0 200,0 0,3
GL50-PNR-32037-27AHDJET 03007259 27
1.969 1.457 1.252 2.283 2900.8 0.660
Annex
96
www.secotools.com
Thread turning
Toolholders
Thread turning
..16.. PP3712 GXA16-1 LS0612-T15P T15P-2 AC4625
..22A.. PP4816 NXA22-1 LS0815-T25P T25P-7 AC5035
..27A.. PP6019 VXA27-1 LS0820-T25P T25P-7 AC6050
Accessories
MDT
..16.. MXA16-1 GXA16-0 – – GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 – – –
..22A.. MXA22-1 NXA22-0 NXA22-98 NXA22-97.5 NXA22-0.5 NXA22-1.5 NXA22-2 NXA22-3 NXA22-4 NXA22-99.5 NXA22-99 NXA22-98.5
..27A.. MXA27-1 VXA27-0 VXA27-98 – VXA27-0.5 VXA27-1.5 VXA27-2 VXA27-3 VXA27-4 VXA27-99.5 VXA27-99 VXA27-98.5
Mini-Shaft™
Thread milling
Thread tapping
Annex
97
www.secotools.com
Thread turning
Toolholders
Steadyline®, GL-heads
Thread turning
MDT

• For inserts program, see page(s)126, 127, 128, 128, 129, 130, 131, 162, 164,
166
Designation Item number DCSFMS LF WF DCINN CP Weight CTWS
mm mm mm mm bar kg
Inch Inch Inch Inch psi lbs
50,0 55,0 36,0 65,0 200,0 0,6

GL50-CNR-36055-26AHD 03051391 26 NR..
1.969 2.165 1.417 2.559 2900.8 1.320
Mini-Shaft™
For holders Cantilever clamp Clamp screw Insert shim (K) Key, clamp Shim screw Spring
GL50... CHD27 L86025-T20P KX26-2 T20P-2D C05012-T15P S7616
Accessories
Thread milling
For holders Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Insert shim (K) Shim key
GL50... KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 KX26-2 T15P-2

Thread tapping
Annex
98
www.secotools.com
Thread turning
Toolholders
Quick Change, Jetstream Tooling® QC-heads – External

Thread turning
MDT
149, 150, 153, 155, 157, 159, 161, 163, 165, 167, 177
• For Technical Guide, se catalog Turning
Designation Item number LF WF HF CP Weight CTWS
mm mm mm bar kg
Inch Inch Inch psi lbs
25,0 6,0 5,975 200,0 0,3
Mini-Shaft™
QC12-PEL-16HDJET 03280773 16
0.984 0.236 0.235 7.9 0.660
25,0 6,0 5,975 200,0 0,1
QC12-PER-16HDJET 03280772 16
0.984 0.236 0.235 7.9 0.220
25,0 8,0 7,9 200,0 0,3
QC16-PEL-16HDJET 03280775 16
0.984 0.315 0.311 7.9 0.660
25,0 8,0 7,9 200,0 0,1
QC16-PER-16HDJET 03280774 16
0.984 0.315 0.311 7.9 0.220
Thread milling
For holders Insert lever Insert shim (S) Lever key Lever screw Shim pin
..-16 PP3712 GXA16-1 T15P-2 LS0612-T15P AC4625
Accessories
Insert clamping
For holders torque Insert shim (M) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Insert shim (S) Mounting fixture Torque key
Thread tapping
SECO-MF7075-
..-16 3.0NM MXA16-1 GXA16-0 GXA16-2 GXA16-3 GXA16-4 GXA16-99 GXA16-98 T00-15P30
QC
Annex
99
www.secotools.com
Thread turning
Toolholders
Toolholder for peeling

Thread turning
1.79°
MDT

• For inserts program, see page(s) 125
Designation Item number KAPR° B H LF LH WF HF Weight CTWS
CSXCR3232P25-R30 03120990 30 32,0 32,0 170,0 64,61 29,53 32,0 0,5 SCNN-R30
Mini-Shaft™
For holders Anvil screw Chipbreaker Insert screw Key Key (T-handle) Plug Shim
CSXCR... CA4012 PS2518 W400820-T30P H6B-T30PL DOUBLE-T JET-P1/8-5MM SSN250630

Thread milling
Thread tapping
Annex
100
www.secotools.com
Thread turning
Toolholders
Toolholder for peeling
Thread turning
1.79°
MDT
• For inserts program, see page(s) 125
Designation Item number KAPR° B H LF LH WF HF Weight CTWS
CSXCR20-8D-R30 03120991 30 1.250 1.250 6.693 2.545 1.163 1.250 3.530 SCNN-R30
Mini-Shaft™
For holders Anvil screw Chipbreaker Insert screw Key Key (T-handle) Plug Shim
CSXCR... CA4012 PS2518 W400820-T30P H6B-T30PL DOUBLE-T JET-P1/8-5MM SSN250630
Thread milling
Thread tapping
Annex
101
www.secotools.com
Thread turning
Toolholders
Toolholder for pipe-facing

Thread turning
MDT

• For inserts program, see catalog Turning
Designation Item number KAPR° B H LF WF HF OAL Weight CTWS CTWS
SN...1906... SN...1906...
MSGNR3240R19-TC-45-60 03120992 90,0 40,0 32,0 174,0 47,0 32,0 195,6 0,7
TCMT16T3... TCMT16T3...
Mini-Shaft™
For holders Cantilever clamp Clamp screw Insert key Insert screw Insert shim Key Key (T-handle) Plug Shim pin
MSGNR... MC22 LD6024-T20P H4B-T15P C03508-T15P SSN190412 H6B-T20P DOUBLE-T JET-P1/8-5MM MN1920-T20P
Thread milling
Thread tapping
Annex
102
www.secotools.com
Thread turning
Toolholders
Toolholder for pipe-facing
Thread turning
MDT
Designation Item number KAPR° B H LF WF HF OAL Weight CTWS CTWS
SN...1906... SN...1906...
MSGNR-125-6-TC-45-60 03120993 90 1.500 1.250 6.850 1.850 1.260 7.701 2.870
TCMT16T3... TCMT16T3...
Mini-Shaft™
For holders Cantilever clamp Clamp screw Insert key Insert screw Insert shim Key Key (T-handle) Plug Shim pin
MSGNR... MC22 LD6024-T20P H4B-T15P C03508-T15P SSN190412 H6B-T20P DOUBLE-T JET-P1/8-5MM MN1920-T20P
Thread milling
Thread tapping
Annex
103
www.secotools.com
Thread turning
Toolholders
Seco-Capto™, Multi insert pocket tools, internal

Toolholders for inserts SNMA, SNMG, SNMM / CNMA, CNMG, CNMM
Thread turning
MDT

• GAMO° = Rake angle, LAMS° = Inclination angle
• KAPR = 75°
• C.-DSKNR/L - CLNR/L 75°
Seco-
Capto
Designation Item number size GAMO° LAMS° DCSFMS LF LF2 LFS LH LH2 WF WF2 Weight CTWS
Mini-Shaft™
C6-DSKNL2713015- 63,0 130,0 128,0 134,0 101,5 99,5 27,0 25,0 2,3
03032390 C6 -5,0 ° -10,0 ° SN1506-CN1606/SN..54-CN..54
PCLNR2512816C 2.480 5.118 5.039 5.276 3.996 3.917 1.063 0.984 5.070
C6-DSKNR2713015- 63,0 130,0 128,0 134,0 101,5 99,5 27,0 25,0 0,9
03031406 C6 -5,0 ° -10,0 ° SN1506-CN1606/SN..54-CN..54
PCLNL2512816 2.480 5.118 5.039 5.276 3.996 3.917 1.063 0.984 1.980
For holders Clamp Clamp pin Clamp screw Insert shim Lever pin Lever screw Plug Shim pin Shim screw Spring
Thread milling
C6 CD16-S FP2012 L86026-T20P PCN160412 PP6017 LS0820 P6SS6X5G RP8286 C05010-T20P S7010
Accessories
For holders Clamp kit Key Lever key
C6 CD16-S16 T20P-7L 3SMS795

Thread tapping
Annex
104
www.secotools.com
Thread turning
Toolholders
Seco-Capto™, Multi insert pocket tools, internal
Thread turning
MDT
• GAMO° = Rake angle, LAMS° = Inclination angle
KAPR = 75° • KAPR = 75°
C.-DSKNR/L - CLNR/L 75° • C.-DSKNR/L - CLNR/L 75°
Seco-
Designation Item number Capto size GAMO° LAMS° DCSFMS LF LF2 LFS WF WF2 Weight CTWS
Mini-Shaft™
C6-MSKNL4006519- 63,0 65,0 65,0 69,8 40,0 35,0 1,5
03032405 C6 -5,0 ° -10,0 ° SN1906-CN1606/ SN..64-CN..54
PCLNR3506516C 2.480 2.559 2.559 2.748 1.575 1.378 3.310
C6-MSKNR4006519- 63,0 65,0 65,0 69,8 40,0 35,0 0,7
03032391 C6 -5,0 ° -10,0 ° SN1906-CN1606/ SN..64-CN..54
PCLNL3506516 2.480 2.559 2.559 2.748 1.575 1.378 1.540
C8-MSKNL4508019- 80,0 80,0 80,0 85,0 45,0 45,0 3,1
03031407 C8 -5,0 ° -10,0 ° SN1906-CN1606/ SN..64-CN..54
PCLNR4508016C 3.150 3.150 3.150 3.346 1.772 1.772 6.830
C8-MSKNR4508019- 80,0 80,0 80,0 85,0 45,0 45,0 3,3
03032403 C8 -5,0 ° -10,0 ° SN1906-CN1606/ SN..64-CN..54
PCLNL4508016 3.150 3.150 3.150 3.346 1.772 1.772 7.280
Thread milling
For size Clamp Coolant nozzle Insert shim Lever pin Lever screw Pin Plug Screw Shim pin
C6/C8 MC22 CN6 SSN190412 PP6017 LS0820 MN1920-T20P P6SS6X5G LD6024-T20P RP8286
Accessories
For holders Key Lever key Thread tapping
C6/C8 T20P-7L 3SMS795

Annex
105
www.secotools.com
Thread turning
Toolholders
Toolholders for chasers, External

Snap-Tap®
Thread turning
MDT

• For inserts program, see page(s) 179, 180
Designation Item number B H LF WF LH Weight CTWS
mm mm mm mm mm kg
CER3232P1-X 03048363 32,0 32,0 170,24 37,25 47,54 1,4 15.875

CER3232P5-X 03048364 32,0 32,0 170,24 37,25 47,54 1,4 25.000
Mini-Shaft™
For holders Clamp kit side Clamp kit top Key, side clamp Key, top clamp
CER W200613-T20P W240618-T25P T20P-7 T25P-7

Thread milling
Thread tapping
Annex
106
www.secotools.com
Thread turning
Toolholders
Toolholders for chasers, External

Snap-Tap®
Thread turning
MDT
Designation Item number B H LF WF LH Weight CTWS
CER1256-1-X 03048365 1.250 1.250 6.702 1.467 1.872 3.090 15.875

CER1256-5-X 03048366 1.250 1.250 6.702 1.467 1.872 3.090 25.000
Mini-Shaft™
CER W200613-T20P W240618-T25P T20P-7 T25P-7
Thread milling
Thread tapping
Annex
107
www.secotools.com
Thread turning
Toolholders
Seco-Capto™ – Toolholders for chasers, external

Snap-Tap®
Thread turning
MDT

mm mm mm kg
C6-CER-45065-1-X 02995827 63,0 65,0 45,0 1,3 15.875

C6-CER-45065-5-X 02995828 63,0 65,0 45,0 1,4 25.000
Mini-Shaft™
C8-CER-55080-1-X 02995821 80,0 80,0 55,0 2,7 15.875

C8-CER-55080-5-X 02995822 80,0 80,0 55,0 2,8 25.000
C6/C8-X W200613-T20P W240618-T25P T20P-7 T25P-7

Thread milling
Thread tapping
Annex
108
www.secotools.com
Thread turning
Toolholders
Seco-Capto™ – Toolholders for chasers, internal

Snap-Tap®
Thread turning
MDT
mm mm mm kg
C6-CNR-45065-1-X 02995829 63,0 65,0 45,0 1,4 15.875

C6-CNR-45065-5-X 02995831 63,0 65,0 45,0 1,4 25.000
Mini-Shaft™
C8-CNL-55080-1-X 03118011 80,0 80,0 55,0 1,9 15.875
C8-CNL-55080-5-X 03118015 80,0 80,0 55,0 1,7 25.000
C8-CNR-55080-1-X 02995823 80,0 80,0 55,0 2,9 15.875
C8-CNR-55080-5-X 02995825 80,0 80,0 55,0 2,9 25.000
For holders Clamp kit side Clamp kit top Coolant nozzle Key, side clamp Key, top clamp
Thread milling
...CNR... W200613-T20P W240618-T25P CN6 T20P-7 T25P-7
...CNL... W200613-T20P W240618-T25P – T20P-7 T25P-7
Thread tapping
Annex
109
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT

Designation Item number DCSFMS LF WF LU Weight CTWS
mm mm mm mm kg
C6-CNR-27115-1-X 03003765 63,0 115,0 27,0 88,0 1,9 15.875

C6-CNR-27115-5-X 03010914 63,0 115,0 27,0 88,0 1,9 25.000
Mini-Shaft™
C6... W200613-T20P W240618-T25P CN6 T20P-7 T25P-7

Thread milling
Thread tapping
Annex
110
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT
mm mm mm kg
C6-CNL-45065-1C-X 02995830 63,0 65,0 45,0 1,4 15.875

C6-CNL-45065-5C-X 02995832 63,0 65,0 45,0 1,4 25.000
Mini-Shaft™
C8-CNL-55080-1C-X 02995824 80,0 80,0 55,0 2,9 15.875
C8-CNL-55080-5C-X 02995826 80,0 80,0 55,0 2,9 25.000
C6/C8... W200613-T20P W240618-T25P CN6 T20P-7 T25P-7
Thread milling
Thread tapping
Annex
111
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT

Designation Item number DCSFMS LF WF LU Weight CTWS
mm mm mm mm kg
C6-CNL-27115-1C-X 03003766 63,0 115,0 27,0 88,0 1,9 15.875

C6-CNL-27115-5C-X 03010915 63,0 115,0 27,0 88,0 1,9 25.000
Mini-Shaft™
C6... W200613-T20P W240618-T25P CN6 T20P-7 T25P-7

Thread milling
Thread tapping
Annex
112
www.secotools.com
Thread turning
Toolholders
Steadyline®, GL-heads – Toolholders for chasers, internal

Snap-Tap®
Thread turning
MDT
mm mm mm kg
GL50-CNL-32035-9-I 03011856 50,0 35,0 32,0 0,5 12.700

GL50-CNL-32038-1-X 03008526 50,0 38,0 32,0 0,5 15.875
Mini-Shaft™
GL50-CNL-32044-5-X 03008553 50,0 44,0 32,0 0,5 25.000
GL50-CNR-32035-9-I 03011855 50,0 35,0 32,0 0,4 12.700
GL50-CNR-32038-1-X 03008525 50,0 38,0 32,0 0,4 15.875
GL50-CNR-32044-5-X 03008552 50,0 44,0 32,0 0,5 25.000
For holders Clamp kit side Clamp kit top Key, clamp Key, side clamp Key, top clamp
Thread milling
...9-1 – W200613-T20P T20P-2D – –
...1-X, ...5-X W200613-T20P W240618-T25P – T20P-2D T25P-7
Thread tapping
Annex
113
www.secotools.com
Thread turning
Toolholders
Toolholders for Precision Axial Grooves

Snap-Tap®
Thread turning
CEAR/L...D CEAR/L...HD/QHD
MDT

• For inserts program and INPLM, se catalog Turning
WF WF2 LH INPLM INPLM2

Designation Item number H B LF 10../14../20.. 12 10../14.. 10../14../20.. 12.. Weight CTWS
CEAL2525M10D 02411448 25,0 25,0 150,0 35,35 38,35 22,0 16,0 18,0 0,8 10../ 12..
CEAL2525M14HD 02627516 25,0 25,0 150,0 36,85 – 31,0 22,0 – 0,8 14..
Mini-Shaft™
CEAL2525M20QHD 02528519 25,0 25,0 150,0 39,35 – 35,0 28,0 – 0,9 20..
CEAR2525M10D 02411447 25,0 25,0 150,0 35,35 38,35 22,0 16,0 18,0 0,8 10../ 12..
CEAR2525M14HD 02627517 25,0 25,0 150,0 36,85 – 31,0 22,0 – 0,8 14..
CEAR2525M20QHD 02528518 25,0 25,0 150,0 39,35 – 35,0 28,0 – 0,9 20..
For holders Cantilever clamp Clamp key Clamp kit Clamp screw Insert shim (KL) Insert shim (KR) Shim screw Spring
Thread milling
CEAL..10 – T15P-2 CSP16-T15P – AKL10 – CS2507-T07P –

CEAL..14 CHD16 T15P-2 – L85020-T15P AKL14 – CS3507-T09P S6912
CEAL..20 CHD22 T20P-7 – L86025-T20P AKL20 – CS4009-T15P S7616
CEAR..10 – T15P-2 CSP16-T15P – – AKR10 CS2507-T07P –
CEAR..14 CHD16 T15P-2 – L85020-T15P – AKR14 CS3507-T09P S6912
CEAR..20 CHD22 T20P-7 – L86025-T20P – AKR20 CS4009-T15P S7616
Accessories
Thread tapping
For holders Insert shim (K) Shim key
CEAL..10 KX12-2 T07P-2

CEAL..14 – T09P-2
CEAL..20 – T15P-2
CEAR..10 KX12-2 T07P-2
CEAR..14 – T09P-2
CEAR..20 – T15P-2
Annex
Shim KX12-2 for insert 12..
114
www.secotools.com
Thread turning
Toolholders
Toolholders for Precision Axial Grooves

Snap-Tap®
Thread turning
CEAR/L...D CEAR/L...HD/QHD
MDT
Item
Designation number H B LF WF LH Weight CTWS
10
CEAL1006-10 00072613 1.000 1.000 6.000 1.392 1.110 1.980
12EAL
10
Mini-Shaft™
CEAR1006-10 00072625 1.000 1.000 6.000 1.392 1.110 2.200
12EAR
CEAR1006-14 00072623 1.000 1.000 6.000 1.451 1.110 2.200 14EAR
For size Clamp key Clamp kit Insert shim Insert shim (KL) Insert shim (KR) Shim key Shim screw
CEAL..-10 T15P-2 CSP16-T15P – AKL10 – – CS2507-T07P
Thread milling
CEAR..-10 T15P-2 CSP16-T15P – – AKR10 – CS2507-T07P
CEAR..-14 T15P-2 CSP16-T15P AKR14 – – T09P-2 CS3507-T09P
Accessories
For size Insert shim (K) Shim key
CEAL..-10 KX12-2 T07P-2

Thread tapping
CEAR..-10 – T07P-2
CEAR..-14 – –
Annex
115
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
SNR/L..H09 SNR/L
MDT

• DCINN - minimum bore diameter
Designation Item number H B LF WF LH LU DMM DCINN Weight CTWS
SNL0010H9 75025331 9,5 9,5 100,0 7,5 20,0 – 10,0 14,0 0,1 9..
SNL0010K9 75025333 15,5 15,5 125,0 6,5 25,0 23,0 16,0 14,0 0,2 9..
Mini-Shaft™
SNL0013L9 75025335 15,5 15,5 140,0 8,0 32,0 30,0 16,0 17,0 0,2 9..
SNL0016M9 75025337 15,5 15,5 150,0 9,5 40,0 38,0 16,0 20,0 0,3 9..
SNR0010H9 75025330 9,5 9,5 100,0 7,5 20,0 – 10,0 14,0 0,1 9..
SNR0010K9 75025332 15,5 15,5 125,0 6,5 25,0 23,0 16,0 14,0 0,2 9..
SNR0013L9 75025334 15,5 15,5 140,0 8,0 32,0 30,0 16,0 17,0 0,2 9..
SNR0016M9 75025336 15,5 15,5 150,0 9,5 40,0 38,0 16,0 20,0 0,3 9..

Thread milling
..9 T07P-2 C02506-T07P

Thread tapping
Annex
116
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT
Designation Item number H B DMM LF LH WF Weight CTWS
SNL00037540-9 00072552 0.336 0.350 0.375 4.000 – 0.299 0.220 9..

SNL00037550-9 00072595 0.336 0.350 0.375 5.000 1.000 0.259 0.440 9..
Mini-Shaft™
SNR00037550-9 00072560 0.625 0.654 0.375 5.000 1.000 0.266 0.440 9..
SNR00037560-9-H 00072562 0.441 0.350 0.375 6.000 – 0.299 0.660 9..
SNR0005055-9 00072586 0.441 0.470 0.500 5.500 1.250 0.319 0.660 9..
SNR00062560-9 00072588 0.566 0.587 0.625 6.000 1.500 0.378 0.660 9..
For size Insert key Insert screw
Thread milling
..-9 T07P-2 C02506-T07P
Thread tapping
Annex
117
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT

• WF (10../14../20../26..) = WF2 (12..)
Designation Item number H B LF WF WF2 LH DMM DCINN DCINN2 Weight CTWS
mm mm mm mm mm mm mm mm mm kg
CNL0020P10DA 02411456 18,0 19,0 170,0 13,5 16,5 26,0 20,0 26,0 29,0 0,4 10../12..
CNL0020P14A 00040045 18,0 19,0 170,0 15,0 – 32,0 20,0 30,0 – 0,4 14..
Mini-Shaft™
CNL0025R10DA 02411464 23,0 24,0 200,0 16,0 19,0 28,0 25,0 31,0 34,0 0,7 10../12..
CNL0025R14A 00040046 23,0 24,0 200,0 17,5 – 45,0 25,0 34,0 – 0,7 14..
CNL0032S10DA 02411468 30,0 31,0 250,0 19,5 22,5 31,0 32,0 38,0 41,0 1,4 10../12..
CNL0032S14A 00040047 30,0 31,0 250,0 21,0 – 48,0 32,0 40,0 – 1,4 14..
CNR0020P10DA 02411454 18,0 19,0 170,0 13,5 16,5 26,0 20,0 26,0 29,0 0,4 10../12..
CNR0020P14A 00040041 18,0 19,0 170,0 15,0 – 32,0 20,0 30,0 – 0,4 14..
CNR0025R10DA 02411459 23,0 24,0 200,0 16,0 19,0 28,0 25,0 31,0 34,0 0,7 10../12..
CNR0025R14A 00040042 23,0 24,0 200,0 17,5 – 45,0 25,0 34,0 – 0,7 14..
Thread milling
CNR0032S10DA 02411467 30,0 31,0 250,0 19,5 22,5 31,0 32,0 38,0 41,0 1,4 10../12..
CNR0032S14A 00040043 30,0 31,0 250,0 21,0 – 48,0 32,0 40,0 – 1,4 14..
CNR0040T14A 00040044 37,0 38,5 300,0 25,0 – 50,0 40,0 48,0 – 2,6 14..
For holders Clamp key Clamp kit Insert shim (K) Shim screw
Thread tapping
..10 T15P-2 CSP16-T15P KX10-2 CS2507-T07P

..14 T15P-2 CSP16-T15P KX14-2 CS3507-T09P
Accessories
For holders Insert shim (K) Shim key
..10 KX12-2 T07P-2

..14 – T09P-2
Annex
118
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT
CNL000757-10 00072624 0.650 0.707 7.000 0.490 1.480 0.880 10../12..

CNL001008-10 00072610 0.902 0.957 8.000 0.620 1.559 1.760 10../12..
Mini-Shaft™
CNL001008-14 00072582 1.000 0.961 8.000 0.704 – 1.760 14..
CNR00075010-10-H 00072583 0.691 0.730 10.000 0.490 1.480 2.650 10../12..
CNR000757-10 00072573 0.691 0.707 7.000 0.490 1.480 1.100 10../12..
CNR000757-14 00072571 0.691 0.707 7.000 0.570 1.693 0.880 14..
CNR001008-10 00072569 0.921 0.957 8.000 0.618 2.500 1.760 10../12..
CNR001008-14 00072567 0.921 0.957 8.000 0.700 1.732 1.980 14..
CNR0012510-10 00072563 1.150 1.209 10.000 0.750 1.772 3.310 10../12..
CNR0012510-14 00072561 1.150 1.209 10.000 0.831 1.969 3.530 –
CNR0015012-10 00072592 1.339 1.427 12.008 0.858 1.772 5.730 10../12..
Thread milling
For size Clamp key Clamp kit Insert shim (K) Shim screw
..-10 T15P-2 CSP16-T15P KX10-2 CS2507-T07P

..-14 T15P-2 CSP16-T15P KX14-2 CS3507-T09P
..-10-10-H T15P-2 CSP16-T15P KX10-2 CS2507-T07P
Thread tapping
Accessories
..-10 KX12-2 T07P-2

..-14 – –
..-10-10-H – T07P-2
Annex
119
www.secotools.com
Thread turning
Toolholders

Snap-Tap
Thread turning
MDT

CEL0755-10Q 00072559 0.750 0.750 5.000 1.000 0.900 1.100 10../12..

CEL1006-10Q 00072596 1.000 1.000 6.000 1.250 0.900 1.980 10../12..
Mini-Shaft™
CEL1006-14Q 00072628 1.000 1.000 6.000 1.250 1.100 1.980 14..

CER0504-10Q 00072566 0.500 0.500 4.000 0.625 0.900 0.440 10../12..
CER0755-10Q 00072564 0.750 0.750 5.000 1.000 0.900 1.100 10../12..
CER1006-10Q 00072600 1.000 1.000 6.000 1.250 0.900 1.980 10../12..
CER1006-14Q 00072634 1.000 1.000 6.000 1.250 1.100 1.760 14..
For size Clamp key Clamp kit Insert shim (K) Shim screw
Thread milling
..-10Q T15P-2 CSP16-T15P KX10-2 CS2507-T07P

L..-14Q T15P-2 CSP16-T15P KX14-2 CS3507-T09P
R..-14Q T15P-2 CSP16-T15P KX14-2 CS3507-T09P
Accessories

Thread tapping
..-10Q KX12-2 T07P-2

L..-14Q – T09P-2
R..-14Q – T09P-2
Annex
120
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
MDT
• WF (10../14../20../26..) = WF2 (12..)
CNL001008-20AHD 02562826 1.000 0.902 0.957 7.992 0.705 1.969 1.400 – 1.540 20..
CNL0012510-20AHD 02562827 1.250 1.150 1.209 10.000 0.945 2.165 1.700 1.400 3.310 20..
Mini-Shaft™
CNL0012510-26AHD 02564043 1.250 1.150 1.209 10.000 1.063 2.323 2.000 1.600 3.090 26..
CNL0015012-20AHD 02562828 1.500 1.339 1.427 12.008 1.063 2.165 2.000 1.600 5.510 20..
CNL0015012-26AHD 02563555 1.500 1.339 1.427 12.008 1.177 2.323 2.100 2.100 5.510 26..
CNL0017514-26AHD 02563563 1.750 1.591 1.677 13.976 1.307 2.283 2.300 1.800 8.820 26..
CNL0025016-26AHD 02563564 2.500 2.343 2.429 15.984 1.683 2.283 3.000 2.500 20.720 26..
CNR001008-20AHD 02562823 1.000 0.902 0.957 7.992 0.705 1.969 1.400 – 1.540 20..
CNR0012510-20AHD 02562824 1.250 1.150 1.209 10.000 0.945 2.165 1.700 1.400 3.310 20..
CNR0012510-26AHD 02562830 1.250 1.150 1.209 10.000 1.063 2.323 2.000 1.600 3.090 26..
Thread milling
CNR0015012-20AHD 02562825 1.500 1.339 1.427 12.008 1.063 2.165 2.000 1.600 5.510 20..
CNR0015012-26AHD 02562831 1.500 1.339 1.427 12.008 1.183 2.323 2.100 2.100 5.510 26..
CNR0017514-26AHD 02562832 1.750 1.591 1.677 13.976 1.307 2.283 2.300 1.800 8.820 26..
CNR0020014-26AHD 02562833 2.000 1.843 1.929 13.976 1.433 2.283 2.500 2.000 11.460 26..
CNR0025016-26AHD 02562834 2.500 2.343 2.429 15.984 1.683 2.283 3.000 2.500 20.720 26..
Thread tapping
..-20 CHD22 T20P-7 L86025-T20P KX20-2 CS4009-T15P S7616

..-26 CHD27 T20P-7 L86025-T20P KX26-2 C05012-T15P S7616
Accessories
For holders Insert shim (K) 1 Insert shim (K) 2 Insert shim (K) 3 Insert shim (K) 4 Insert shim (K) 5 Insert shim (K) 6 Shim key
..-20 KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2

Annex
..-26 KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2
121
www.secotools.com
Thread turning
Toolholders

Snap-Tap
Thread turning
MDT

CEL1006-20QHD 02529053 1.000 1.000 6.000 1.250 1.300 1.980 20..

CEL1006-26QHD 02529064 1.000 1.000 6.000 1.250 1.800 2.200 26..
Mini-Shaft™
CEL1256-20QHD 02529061 1.250 1.250 6.000 1.500 1.300 2.870 20..

CER1006-20QHD 02529045 1.000 1.000 6.000 1.250 1.300 1.980 20..
CER1006-26QHD 02529063 1.000 1.000 6.000 1.250 1.800 2.200 26..
CER1256-20QHD 02529057 1.250 1.250 6.000 1.500 1.417 2.870 20..
CER1256-26QHD 02529066 1.250 1.250 6.000 1.500 1.800 3.090 26..
CER1506-26QHD 02529069 1.500 1.500 6.000 1.750 1.800 3.970 26..

Thread milling
For size Cantilever clamp Clamp key Clamp screw Insert shim (K) Shim screw Spring
..-20Q CHD22 T20P-7 L86025-T20P KX20-2 CS4009-T15P S7616

..-26Q CHD27 T20P-7 L86025-T20P KX26-2 C05012-T15P S7616
Accessories
For size Insert shim (K) 1 Insert shim (K) 2 Insert shim (K) 3 Insert shim (K) 4 Insert shim (K) 5 Insert shim (K) 6 Shim key
Thread tapping
..-20 KX20-99 KX20-0 KX20-1 KX20-3 KX20-4 KX20-5 T15P-2

..-26 KX26-99 KX26-0 KX26-1 KX26-3 KX26-4 KX26-5 T15P-2
Annex
122
www.secotools.com
Thread turning
Toolholders

Snap-Tap®
Thread turning
CER/L...D CER/L...QHD
MDT
LF LF2 LH LH2
Designation Item number H B 10../14.. 12 WF 10../14.. 12 Weight CTWS
CEL1212M10D 02435852 12,0 12,0 150,0 153,0 16,0 21,5 24,5 0,2 10../ 12..
CEL1616H10D 02411436 16,0 16,0 100,0 103,0 16,0 21,5 24,5 0,2 10../ 12..
Mini-Shaft™
CEL2020K10D 02411437 20,0 20,0 125,0 128,0 25,0 21,5 24,5 0,4 10../ 12..
CEL2525M10D 02411438 25,0 25,0 150,0 153,0 32,0 21,5 24,5 0,8 10../ 12..
CEL2525M14QHD 02627518 25,0 25,0 150,0 – 32,0 26,0 – 0,8 14..
CEL3225P10D 02411440 32,0 25,0 170,0 173,0 32,0 22,5 25,5 1,1 10../ 12..
CER1212M10D 02435850 12,0 12,0 150,0 153,0 16,0 21,5 24,5 0,2 10../ 12..
CER1616H10D 02411427 16,0 16,0 100,0 103,0 16,0 21,5 24,5 0,2 10../ 12..
CER2020K10D 02411428 20,0 20,0 125,0 128,0 25,0 21,5 24,5 0,4 10../ 12..
CER2525M10D 02411430 25,0 25,0 150,0 153,0 32,0 21,5 24,5 0,8 10../ 12..
CER2525M14QHD 02538606 25,0 25,0 150,0 – 32,0 26,0 – 0,8 14..
Thread milling
CER3225P10D 02411432 32,0 25,0 170,0 173,0 32,0 22,5 25,5 1,1 10../ 12..
CER3225P14QHD 02627519 32,0 25,0 170,0 – 32,0 26,0 – 1,1 14..
CER3232P14QHD 02627520 32,0 32,0 170,0 – 32,0 26,0 – 1,4 14..
For holders Cantilever clamp Clamp key Clamp kit Clamp screw Insert shim (K) Shim screw Spring
Thread tapping
..10 – T15P-2 CSP16-T15P – KX10-2 CS2507-T07P –

..14 CHD16 T15P-2 – L85020-T15P KX14-2 CS3507-T09P S6912
Accessories
For holders Insert shim (K) Insert shim (K) 1 Insert shim (K) 2 Insert shim (K) 3 Insert shim (K) 4 Insert shim (K) 5 Shim key
..10 KX12-2 – – – – – T07P-2

..14 – KX14-0 KX14-1 KX14-3 KX14-4 KX14-5 T09P-2
Annex
123
www.secotools.com
Thread turning
Inserts
SCNN for peeling

Thread turning
Grades
Designation Note RE BS IC S KRINS° Coated
mm mm mm mm
TP250T
Inch Inch Inch Inch
MDT
4,0 6,2 25,0 6,35

SCNN250640-R25 * 23 [
0.157 0.244 0.984 0.250
4,0 6,6 25,0 6,35
SCNN250640-R30 28 [
0.157 0.260 0.984 0.250
* R25 for use in 25 degree pockets only - not the 30 degree - R30
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
124
www.secotools.com
Thread turning
Inserts
Partial Profile 55° – External Threading

Snap-Tap®
Thread turning
16ER.. 16ER..A 16ER..A1 16ER..A2 16V55* 22ER.. 26ER/26NR..
MDT
Grades
Insert Part No. Right Pitch RE PDY PDX IC W1 L S Coated Uncoated
mm mm mm mm mm mm mm CP200 CP300 CP500 TTP2050 H15

mm TPI
Inch Inch Inch Inch Inch Inch Inch
0,08 0,6 0,8 9,525 – 16,5 3,47
16ERA55 0,5-1,5 48-16 [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG55 0,5-3 48-8 [ [ [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
Mini-Shaft™
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG55-A 0,5-3 48-8 [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG55-A1 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG55-A2 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,2 1,1 1,5 9,525 – 16,5 3,47
16ERG55 1,75-3 14-8 [ [ [
0.008 0.043 0.059 0.375 – 0.650 0.137
0,2 1,2 1,5 9,525 – 16,5 3,47
16ERG55-A 1,75-3 14-8 [ [
0.008 0.047 0.059 0.375 – 0.650 0.137
0,2 1,2 1,5 9,525 – 16,5 3,47
Thread milling
16ERG55-A1 1,75-3 14-8 [
0.008 0.047 0.059 0.375 – 0.650 0.137
0,2 1,2 1,5 9,525 – 16,5 3,47
16ERG55-A2 1,75-3 14-8 [
0.008 0.047 0.059 0.375 – 0.650 0.137
0,4 1,8 2,5 12,7 – 22,0 4,71
22ERN55 3,5-5 7-5 [ [
0.016 0.071 0.098 0.500 – 0.866 0.185
0,7 – 5,0 – 15,875 26,0 7,88
26ERK55 5,5-10 4.5-2.5 [ [
0.028 – 0.197 – 0.625 1.024 0.310
0,7 – 5,0 – 15,875 26,0 7,88
26NRK55 5,5-10 4.5-2.5 [
0.028 – 0.197 – 0.625 1.024 0.310
– – – – – – –
16V55 – – [
– – – – – – –
Thread tapping
Grades
Insert Part No. Left Pitch RE PDY PDX IC W1 L S Coated Uncoated

mm TPI
0,08 0,6 0,8 9,525 – 16,5 3,47
16ELA55 0,5-1,5 48-16 [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ELAG55 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,2 1,1 1,5 9,525 – 16,5 3,47
16ELG55 1,75-3 14-8 [
0.008 0.043 0.059 0.375 – 0.650 0.137
Annex
0,4 1,8 2,5 12,7 – 22,0 4,71

22ELN55 3,5-5 7-5 [
0.016 0.071 0.098 0.500 – 0.866 0.185
[ Stock standard. * Toolset contents: 3 pcs 16ERG55, CP500, 3 pcs 16NRG55, CP500, 2
pcs 16ERA55, CP500 and 2 pcs 16NRA55, CP500
125
www.secotools.com
Thread turning
Inserts
Partial Profile 55° – Internal Threading

Snap-Tap®
Thread turning
09NR/11Nx/16Nx/22Nx.. 16NR..A 16NR..A1 16NR..A2 26ER/26NR..

MDT
Grades

mm TPI
0,08 0,7 0,8 5,56 – 9,6 2,4
09NRA55 0,5-1,5 48-16 [
0.003 0.028 0.031 0.219 – 0.378 0.094
0,08 0,6 0,8 6,35 – 11,0 3,0
11NRA55 0,5-1,5 48-16 [ [
Mini-Shaft™
0.003 0.024 0.031 0.250 – 0.433 0.118

0,08 0,6 0,8 9,525 – 16,5 3,47
16NRA55 0,5-1,5 48-16 [ [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG55 0,5-3 48-8 [ [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG55-A 0,5-3 48-8 [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG55-A1 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG55-A2 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
Thread milling
0,2 1,1 1,5 9,525 – 16,5 3,47

16NRG55 1,75-3 14-8 [ [ [
0.008 0.043 0.059 0.375 – 0.650 0.137
0,2 1,1 1,5 9,525 – 16,5 3,47
16NRG55-A 1,75-3 14-8 [ [
0.008 0.043 0.059 0.375 – 0.650 0.137
0,2 1,1 1,5 9,525 – 16,5 3,47
16NRG55-A1 1,75-3 14-8 [
0.008 0.043 0.059 0.375 – 0.650 0.137
0,2 1,1 1,5 9,525 – 16,5 3,47
16NRG55-A2 1,75-3 14-8 [
0.008 0.043 0.059 0.375 – 0.650 0.137
0,4 1,8 2,5 12,7 – 22,0 4,71
22NRN55 3,5-5 7-5 [ [
0.016 0.071 0.098 0.500 – 0.866 0.185
0,7 – 5,0 – 15,875 26,0 7,88
Thread tapping
26ERK55 5,5-10 4.5-2.5 [ [

0.028 – 0.197 – 0.625 1.024 0.310
Grades

mm TPI
0,08 0,6 0,8 6,35 – 11,0 3,0
11NLA55 0,5-1,5 48-16 [
0.003 0.024 0.031 0.250 – 0.433 0.118
0,08 0,6 0,8 9,525 – 16,5 3,47
16NLA55 0,5-1,5 48-16 [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
Annex
16NLAG55 0,5-3 48-8 [

0.003 0.043 0.059 0.375 – 0.650 0.137
0,2 1,1 1,5 9,525 – 16,5 3,47
16NLG55 1,75-3 14-8 [
0.008 0.043 0.059 0.375 – 0.650 0.137
0,4 1,8 2,5 12,7 – 22,0 4,71
22NLN55 3,5-5 7-5 [
0.016 0.071 0.098 0.500 – 0.866 0.185
[ Stock standard.
126
www.secotools.com
Thread turning
Inserts
Partial Profile 60° – External Threading

Snap-Tap®
Thread turning
16ER..A 16ER..A1 16ER..A2 16Ex/22Ex.. 16V60* 26ER/26NR
MDT
Grades

mm TPI
0,08 0,6 0,8 9,525 – 16,5 3,47
16ERA60 0,5-1,5 48-16 [ [ [ [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 0,6 0,8 9,525 – 16,5 3,47
16ERA60-A 0,5-1,5 48-16 [ [
0.003 0.024 0.031 0.375 – 0.650 0.137
Mini-Shaft™
0,08 0,6 0,8 9,525 – 16,5 3,47
16ERA60-A1 0,5-1,5 48-16 [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 0,6 0,8 9,525 – 16,5 3,47
16ERA60-A2 0,5-1,5 48-16 [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG60-A 0,5-3 48-8 [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG60-A1 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ERAG60-A2 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
Thread milling
16ERAG60 0,5-3 48-8 [ [ [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,18 1,1 1,5 9,525 – 16,5 3,47
16ERG60 1,75-3 14-8 [ [ [ [
0.007 0.043 0.059 0.375 – 0.650 0.137
0,18 1,2 1,5 9,525 – 16,5 3,47
16ERG60-A 1,75-3 14-8 [ [
0.007 0.047 0.059 0.375 – 0.650 0.137
0,18 1,2 1,5 9,525 – 16,5 3,47
16ERG60-A1 1,75-3 14-8 [
0.007 0.047 0.059 0.375 – 0.650 0.137
0,18 1,2 1,5 9,525 – 16,5 3,47
16ERG60-A2 1,75-3 14-8 [
0.007 0.047 0.059 0.375 – 0.650 0.137
0,4 1,8 2,5 12,7 – 22,0 4,71
22ERN60 3,5-5 7-5 [ [ [ [
0.016 0.071 0.098 0.500 – 0.866 0.185
Thread tapping
0,4 – 5,0 – 15,875 26,0 7,88

26ERK60 5,5-10 4.5-2.5 [ [
0.016 – 0.197 – 0.625 1.024 0.310
0,4 – 5,0 – 15,875 26,0 7,88
26NRK60 5,5-10 4.5-2.5 [ [
0.016 – 0.197 – 0.625 1.024 0.310
– – – – – – –
16V60 – – [
– – – – – – –
[ Stock standard. * Toolset contents: 3 pcs 16ERG60, CP500, 3 pcs 16NRG60, CP500, 2 pcs 16ERA60, CP500 and 2
pcs 16NRA60, CP500
Grades

Annex

mm TPI
0,08 0,6 0,8 9,525 – 16,5 3,47
16ELA60 0,5-1,5 48-16 [
0.003 0.024 0.031 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16ELAG60 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
127
www.secotools.com
Thread turning
Inserts
Grades

Thread turning

mm TPI
0,18 1,1 1,5 9,525 – 16,5 3,47
16ELG60 1,75-3 8-14 [
0.007 0.043 0.059 0.375 – 0.650 0.137
0,4 1,8 2,5 12,7 – 22,0 4,71
22ELN60 3,5-5 5-7 [
0.016 0.071 0.098 0.500 – 0.866 0.185
[ Stock standard.
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
128
www.secotools.com
Thread turning
Inserts
Partial Profile 60° – Internal Threading

Snap-Tap®
Thread turning
11NR/16NR..A 11NR/16NR..A1 11NR/16NR..A2 26ER/26NR
MDT
Grades

mm TPI
0,08 0,7 0,8 5,56 – 9,6 2,4
09NRA60 0,5-1,5 48-16 [
0.003 0.028 0.031 0.219 – 0.378 0.094
0,08 0,7 0,8 6,35 – 11,0 3,0
11NRA60 0,5-1,5 48-16 [ [ [ [
0.003 0.028 0.031 0.250 – 0.433 0.118
Mini-Shaft™
0,08 0,7 0,8 9,525 – 16,5 3,47
16NRA60 0,5-1,5 48-16 [ [
0.003 0.028 0.031 0.375 – 0.650 0.137
0,08 0,7 0,8 6,35 – 11,0 3,0
11NRA60-A 0,5-1,5 48-16 [ [
0.003 0.028 0.031 0.250 – 0.433 0.118
0,08 0,7 0,8 6,35 – 11,0 3,0
11NRA60-A1 0,5-1,5 48-16 [
0.003 0.028 0.031 0.250 – 0.433 0.118
0,08 0,7 0,8 6,35 – 11,0 3,0
11NRA60-A2 0,5-1,5 48-16 [
0.003 0.028 0.031 0.250 – 0.433 0.118
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG60 0,5-3 48-8 [ [ [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
Thread milling
16NRAG60-A 0,5-3 48-8 [ [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG60-A1 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,08 1,1 1,5 9,525 – 16,5 3,47
16NRAG60-A2 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,12 1,1 1,5 9,525 – 16,5 3,47
16NRG60 1,75-3 14-8 [ [ [ [
0.005 0.043 0.059 0.375 – 0.650 0.137
0,12 1,2 1,5 9,525 – 16,5 3,47
16NRG60-A 1,75-3 14-8 [ [
0.005 0.047 0.059 0.375 – 0.650 0.137
0,12 1,2 1,5 9,525 – 16,5 3,47
16NRG60-A1 1,75-3 14-8 [
0.005 0.047 0.059 0.375 – 0.650 0.137
Thread tapping
0,12 1,2 1,5 9,525 – 16,5 3,47

16NRG60-A2 1,75-3 14-8 [
0.005 0.047 0.059 0.375 – 0.650 0.137
0,25 1,8 2,5 12,7 – 22,0 4,71
22NRN60 3,5-5 7-5 [ [ [ [
0.010 0.071 0.098 0.500 – 0.866 0.185
0,4 – 5,0 – 15,875 26,0 7,88
26NRK60 5,5-10 4.5-2.5 [ [
0.016 – 0.197 – 0.625 1.024 0.310
0,4 – 5,0 – 15,875 26,0 7,88
26ERK60 5,5-10 4.5-2.5 [ [
0.016 – 0.197 – 0.625 1.024 0.310
Grades

Annex

mm TPI
0,08 0,7 0,8 6,35 – 11,0 3,0
11NLA60 0,5-1,5 48-16 [
0.003 0.028 0.031 0.250 – 0.433 0.118
0,08 0,7 0,8 9,525 – 16,5 3,47
16NLA60 0,5-1,5 48-16 [
0.003 0.028 0.031 0.375 – 0.650 0.137
129
www.secotools.com
Thread turning
Inserts
Grades

Thread turning

mm TPI
0,08 1,1 1,5 9,525 – 16,5 3,47
16NLAG60 0,5-3 48-8 [
0.003 0.043 0.059 0.375 – 0.650 0.137
0,12 1,1 1,5 9,525 – 16,5 3,47
16NLG60 1,75-3 14-8 [
0.005 0.043 0.059 0.375 – 0.650 0.137
0,25 1,8 2,5 12,7 – 22,0 4,71
22NLN60 3,5-5 7-5 [
0.010 0.071 0.098 0.500 – 0.866 0.185
[ Stock standard.
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
130
www.secotools.com
Thread turning
Inserts
ISO Metric – External Threading

Snap-Tap®
Thread turning
ISO965/1 - 1980
3h/4h
16ER/22ER/27ER..M 16ER..A 16ER..A1 16ER..A2 16ER..TT 16Ex/22Ex/27ER
MDT
Grades
Insert Part No. Right Pitch RE PDY PDX IC L S Coated Uncoated
mm mm mm mm mm mm CP200 CP300 CP500 TTP2050 H15

mm TPI
Inch Inch Inch Inch Inch Inch
0,06 0,8 0,8 9,525 16,5 3,47
16ER0.5ISO 0,5 – [ [
0.002 0.031 0.031 0.375 0.650 0.137
0,11 0,8 0,8 9,525 16,5 3,47
16ER0.75ISO 0,75 – [ [
0.004 0.031 0.031 0.375 0.650 0.137
Mini-Shaft™
0,11 0,8 0,6 9,525 16,5 3,47
16ER0.8ISO 0,8 – [
0.004 0.031 0.024 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16ER1.0ISO 1 – [ [ [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 1,5 2,4 9,525 16,5 3,47
16ER1.0ISO3M 1 – [
0.006 0.059 0.094 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16ER1.0ISO-A 1 – [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16ER1.0ISO-A1 1 – [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
Thread milling
16ER1.0ISO-A2 1 – [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 1,3 1,3 9,525 16,5 3,47
16ER1.0ISO-TT 1 – [
0.006 0.051 0.051 0.375 0.650 0.137
0,17 0,8 0,8 9,525 16,5 3,47
16ER1.25ISO 1,25 – [ [ [ [
0.007 0.031 0.031 0.375 0.650 0.137
0,17 0,8 0,8 9,525 16,5 3,47
16ER1.25ISO-A 1,25 – [ [
0.007 0.031 0.031 0.375 0.650 0.137
0,17 0,8 0,8 9,525 16,5 3,47
16ER1.25ISO-A1 1,25 – [
0.007 0.031 0.031 0.375 0.650 0.137
0,17 0,8 0,8 9,525 16,5 3,47
16ER1.25ISO-A2 1,25 – [
0.007 0.031 0.031 0.375 0.650 0.137
Thread tapping
0,22 0,8 0,8 9,525 16,5 3,47

16ER1.5ISO 1,5 – [ [ [ [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 1,5 2,2 9,525 16,5 3,47
16ER1.5ISO2M 1,5 – [
0.009 0.059 0.087 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16ER1.5ISO-A 1,5 – [ [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16ER1.5ISO-A1 1,5 – [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16ER1.5ISO-A2 1,5 – [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 1,3 1,8 9,525 16,5 3,47
16ER1.5ISO-TT 1,5 – [
0.009 0.051 0.071 0.375 0.650 0.137
Annex
0,22 2,3 3,6 12,7 22,0 4,71

22ER1.5ISO3M 1,5 – [
0.009 0.091 0.142 0.500 0.866 0.185
0,25 1,2 1,5 9,525 16,5 3,47
16ER1.75ISO 1,75 – [ [ [ [
0.010 0.047 0.059 0.375 0.650 0.137
0,25 1,2 1,5 9,525 16,5 3,47
16ER1.75ISO-A 1,75 – [ [
0.010 0.047 0.059 0.375 0.650 0.137
131
www.secotools.com
Thread turning
Inserts
Grades

Thread turning

mm TPI
0,25 1,2 1,5 9,525 16,5 3,47
16ER1.75ISO-A1 1,75 – [
0.010 0.047 0.059 0.375 0.650 0.137
0,25 1,2 1,5 9,525 16,5 3,47
16ER1.75ISO-A2 1,75 – [
0.010 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
16ER2.0ISO 2 – [ [ [ [
0.011 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
16ER2.0ISO-A 2 – [ [
0.011 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
16ER2.0ISO-A1 2 – [
0.011 0.047 0.059 0.375 0.650 0.137
MDT
0,29 1,2 1,5 9,525 16,5 3,47

16ER2.0ISO-A2 2 – [
0.011 0.047 0.059 0.375 0.650 0.137
0,29 1,6 2,4 9,525 16,5 3,47
16ER2.0ISO-TT 2 – [
0.011 0.063 0.094 0.375 0.650 0.137
0,29 2,0 2,9 12,7 22,0 4,71
22ER2.0ISO2M 2 – [
0.011 0.079 0.114 0.500 0.866 0.185
0,29 3,0 4,8 12,7 22,0 4,71
22ER2.0ISO3M 2 – [
0.011 0.118 0.189 0.500 0.866 0.185
0,34 1,2 1,5 9,525 16,5 3,47
16ER2.5ISO 2,5 – [ [ [ [
0.013 0.047 0.059 0.375 0.650 0.137
Mini-Shaft™
0,34 1,2 1,5 9,525 16,5 3,47

16ER2.5ISO-A 2,5 – [ [
0.013 0.047 0.059 0.375 0.650 0.137
0,34 1,2 1,5 9,525 16,5 3,47
16ER2.5ISO-A1 2,5 – [
0.013 0.047 0.059 0.375 0.650 0.137
0,34 1,2 1,5 9,525 16,5 3,47
16ER2.5ISO-A2 2,5 – [
0.013 0.047 0.059 0.375 0.650 0.137
0,42 1,2 1,5 9,525 16,5 3,47
16ER3.0ISO 3 – [ [ [ [
0.017 0.047 0.059 0.375 0.650 0.137
0,42 1,2 1,5 9,525 16,5 3,47
16ER3.0ISO-A 3 – [ [
0.017 0.047 0.059 0.375 0.650 0.137
0,42 1,2 1,5 9,525 16,5 3,47
16ER3.0ISO-A1 3 – [
Thread milling
0.017 0.047 0.059 0.375 0.650 0.137

0,42 1,2 1,5 9,525 16,5 3,47
16ER3.0ISO-A2 3 – [
0.017 0.047 0.059 0.375 0.650 0.137
0,42 2,8 4,3 15,875 27,0 6,15
27ER3.0ISO2M 3 – [
0.017 0.110 0.169 0.625 1.063 0.242
0,47 1,8 2,5 12,7 22,0 4,71
22ER3.5ISO 3,5 – [ [ [ [
0.019 0.071 0.098 0.500 0.866 0.185
0,53 1,8 2,5 12,7 22,0 4,71
22ER4.0ISO 4 – [ [ [ [
0.021 0.071 0.098 0.500 0.866 0.185
0,59 1,8 2,5 12,7 22,0 4,71
22ER4.5ISO 4,5 – [ [
0.023 0.071 0.098 0.500 0.866 0.185
Thread tapping
0,66 1,8 2,5 12,7 22,0 4,71

22ER5.0ISO 5 – [ [ [
0.026 0.071 0.098 0.500 0.866 0.185
0,72 2,2 3,2 15,875 27,0 6,15
27ER5.5ISO 5,5 – [
0.028 0.087 0.126 0.625 1.063 0.242
0,79 2,2 3,2 15,875 27,0 6,15
27ER6.0ISO 6 – [ [
0.031 0.087 0.126 0.625 1.063 0.242
Grades
Insert Part No. Left Pitch RE PDY PDX IC L S Coated Uncoated

mm TPI
Annex
0,06 0,8 0,8 9,525 16,5 3,47

16EL0.5ISO 0,5 – [
0.002 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16EL0.75ISO 0,75 – [
0.004 0.031 0.031 0.375 0.650 0.137
0,11 0,8 0,8 9,525 16,5 3,47
16EL0.8ISO 0,8 – [
0.004 0.031 0.031 0.375 0.650 0.137
132
www.secotools.com
Thread turning
Inserts
Grades
Thread turning
mm TPI
0,12 0,8 0,8 9,525 16,5 3,47
16EL1.0ISO 1 – [
0.005 0.031 0.031 0.375 0.650 0.137
0,15 0,8 0,8 9,525 16,5 3,47
16EL1.25ISO 1,25 – [
0.006 0.031 0.031 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16EL1.5ISO 1,5 – [ [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 1,2 1,5 9,525 16,5 3,47
16EL1.75ISO 1,75 – [
0.009 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
16EL2.0ISO 2 – [
0.011 0.047 0.059 0.375 0.650 0.137
MDT
0,31 1,2 1,5 9,525 16,5 3,47
16EL2.5ISO 2,5 – [
0.012 0.047 0.059 0.375 0.650 0.137
0,42 1,2 1,5 9,525 16,5 3,47
16EL3.0ISO 3 – [
0.017 0.047 0.059 0.375 0.650 0.137
0,47 1,8 2,5 12,7 22,0 4,71
22EL3.5ISO 3,5 – [
0.019 0.071 0.098 0.500 0.866 0.185
0,53 1,8 2,5 12,7 22,0 4,71
22EL4.0ISO 4 – [
0.021 0.071 0.098 0.500 0.866 0.185
0,59 1,8 2,5 12,7 22,0 4,71
22EL4.5ISO 4,5 – [
0.023 0.071 0.098 0.500 0.866 0.185
Mini-Shaft™
0,66 1,8 2,5 12,7 22,0 4,71
22EL5.0ISO 5 – [
0.026 0.071 0.098 0.500 0.866 0.185
[ Stock standard.
Thread milling
Thread tapping
Annex
133
www.secotools.com
Thread turning
Inserts
ISO Metric – Internal Threading

Snap-Tap®
Thread turning
ISO965/1 - 1980
3h/4h
09NR/11Nx/16Nx/22Nx/27NR 11NR/16NR..A 11NR/16NR..A1 11NR/16NR..A2 16NR/22NR..M 16NR..TT

MDT
Grades

mm TPI
0,04 0,7 0,6 5,56 9,6 2,4
09NR0.5ISO 0,5 – [
0.002 0.028 0.024 0.219 0.378 0.094
0,03 0,8 0,8 6,35 11,0 3,0
11NR0.5ISO 0,5 – [ [
Mini-Shaft™
0.001 0.031 0.031 0.250 0.433 0.118

0,03 0,8 0,8 9,525 16,5 3,47
16NR0.5ISO 0,5 – [ [
0.001 0.031 0.031 0.375 0.650 0.137
0,04 0,8 0,8 6,35 11,0 3,0
11NR0.75ISO 0,75 – [ [
0.002 0.031 0.031 0.250 0.433 0.118
0,04 0,8 0,8 9,525 16,5 3,47
16NR0.75ISO 0,75 – [ [
0.002 0.031 0.031 0.375 0.650 0.137
0,07 0,7 0,6 5,56 9,6 2,4
09NR0.8ISO 0,8 – [
0.003 0.028 0.024 0.219 0.378 0.094
0,07 0,7 0,8 5,56 9,6 2,4
09NR1.0ISO 1 – [
0.003 0.028 0.031 0.219 0.378 0.094
Thread milling
0,08 0,8 0,8 6,35 11,0 3,0

11NR1.0ISO 1 – [ [ [ [
0.003 0.031 0.031 0.250 0.433 0.118
0,08 0,8 0,8 6,35 11,0 3,0
11NR1.0ISO-A 1 – [ [
0.003 0.031 0.031 0.250 0.433 0.118
0,08 0,8 0,8 6,35 11,0 3,0
11NR1.0ISO-A1 1 – [
0.003 0.031 0.031 0.250 0.433 0.118
0,08 0,8 0,8 6,35 11,0 3,0
11NR1.0ISO-A2 1 – [
0.003 0.031 0.031 0.250 0.433 0.118
0,08 0,8 0,8 9,525 16,5 3,47
16NR1.0ISO 1 – [ [ [ [
0.003 0.031 0.031 0.375 0.650 0.137
0,08 1,5 2,4 9,525 16,5 3,47
Thread tapping
16NR1.0ISO3M 1 – [
0.003 0.059 0.094 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16NR1.0ISO-A 1 – [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16NR1.0ISO-A1 1 – [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16NR1.0ISO-A2 1 – [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 1,3 1,2 9,525 16,5 3,47
16NR1.0ISO-TT 1 – [
0.004 0.051 0.047 0.375 0.650 0.137
0,11 0,7 0,8 5,56 9,6 2,4
09NR1.25ISO 1,25 – [
0.004 0.028 0.031 0.219 0.378 0.094
0,09 0,8 0,8 6,35 11,0 3,0
11NR1.25ISO 1,25 – [ [
0.004 0.031 0.031 0.250 0.433 0.118
Annex
0,09 0,8 0,8 9,525 16,5 3,47

16NR1.25ISO 1,25 – [ [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,12 0,7 0,8 5,56 9,6 2,4
09NR1.5ISO 1,5 – [
0.005 0.028 0.031 0.219 0.378 0.094
134
www.secotools.com
Thread turning
Inserts
Grades
Thread turning
mm TPI
0,12 0,8 0,8 6,35 11,0 3,0
11NR1.5ISO 1,5 – [ [ [ [
0.005 0.031 0.031 0.250 0.433 0.118
0,12 0,8 0,8 6,35 11,0 3,0
11NR1.5ISO-A 1,5 – [ [
0.005 0.031 0.031 0.250 0.433 0.118
0,12 0,8 0,8 6,35 11,0 3,0
11NR1.5ISO-A1 1,5 – [
0.005 0.031 0.031 0.250 0.433 0.118
0,12 0,8 0,8 6,35 11,0 3,0
11NR1.5ISO-A2 1,5 – [
0.005 0.031 0.031 0.250 0.433 0.118
0,12 0,8 0,8 9,525 16,5 3,47
16NR1.5ISO 1,5 – [ [ [ [
0.005 0.031 0.031 0.375 0.650 0.137
MDT
0,12 1,4 2,1 9,525 16,5 3,47
16NR1.5ISO2M 1,5 – [
0.005 0.055 0.083 0.375 0.650 0.137
0,12 0,8 0,8 9,525 16,5 3,47
16NR1.5ISO-A 1,5 – [ [
0.005 0.031 0.031 0.375 0.650 0.137
0,12 0,8 0,8 9,525 16,5 3,47
16NR1.5ISO-A1 1,5 – [
0.005 0.031 0.031 0.375 0.650 0.137
0,12 0,8 0,8 9,525 16,5 3,47
16NR1.5ISO-A2 1,5 – [
0.005 0.031 0.031 0.375 0.650 0.137
0,12 1,3 1,8 9,525 16,5 3,47
16NR1.5ISO-TT 1,5 – [
0.005 0.051 0.071 0.375 0.650 0.137
Mini-Shaft™
0,12 2,3 3,6 12,7 22,0 4,71
22NR1.5ISO3M 1,5 – [
0.005 0.091 0.142 0.500 0.866 0.185
0,12 0,7 0,8 5,56 9,6 2,4
09NR1.75ISO 1,75 – [
0.005 0.028 0.031 0.219 0.378 0.094
0,12 0,8 0,8 6,35 11,0 3,0
11NR1.75ISO 1,75 – [ [
0.005 0.031 0.031 0.250 0.433 0.118
0,12 1,2 1,5 9,525 16,5 3,47
16NR1.75ISO 1,75 – [ [
0.005 0.047 0.059 0.375 0.650 0.137
0,17 0,7 0,9 5,56 9,6 2,4
09NR2.0ISO 2 – [
0.007 0.028 0.035 0.219 0.378 0.094
0,17 0,8 0,9 6,35 11,0 3,0
11NR2.0ISO 2 – [ [ [ [
Thread milling
0.007 0.031 0.035 0.250 0.433 0.118
0,17 0,8 0,9 6,35 11,0 3,0
11NR2.0ISO-A 2 – [ [
0.007 0.031 0.035 0.250 0.433 0.118
0,17 0,8 0,9 6,35 11,0 3,0
11NR2.0ISO-A1 2 – [
0.007 0.031 0.035 0.250 0.433 0.118
0,17 0,8 0,9 6,35 11,0 3,0
11NR2.0ISO-A2 2 – [
0.007 0.031 0.035 0.250 0.433 0.118
0,17 1,2 1,5 9,525 16,5 3,47
16NR2.0ISO 2 – [ [ [ [
0.007 0.047 0.059 0.375 0.650 0.137
0,16 1,2 1,5 9,525 16,5 3,47
16NR2.0ISO-A 2 – [ [
0.006 0.047 0.059 0.375 0.650 0.137
Thread tapping
0,16 1,2 1,5 9,525 16,5 3,47

16NR2.0ISO-A1 2 – [
0.006 0.047 0.059 0.375 0.650 0.137
0,16 1,2 1,5 9,525 16,5 3,47
16NR2.0ISO-A2 2 – [
0.006 0.047 0.059 0.375 0.650 0.137
0,18 1,6 2,4 9,525 16,5 3,47
16NR2.0ISO-TT 2 – [
0.007 0.063 0.094 0.375 0.650 0.137
0,17 2,0 2,9 12,7 22,0 4,71
22NR2.0ISO2M 2 – [
0.007 0.079 0.114 0.500 0.866 0.185
0,17 3,0 4,8 12,7 22,0 4,71
22NR2.0ISO3M 2 – [
0.007 0.118 0.189 0.500 0.866 0.185
0,18 1,2 1,5 9,525 16,5 3,47
16NR2.5ISO 2,5 – [ [ [ [
0.007 0.047 0.059 0.375 0.650 0.137
Annex
0,18 1,2 1,5 9,525 16,5 3,47

16NR2.5ISO-A 2,5 – [ [
0.007 0.047 0.059 0.375 0.650 0.137
0,18 1,2 1,5 9,525 16,5 3,47
16NR2.5ISO-A1 2,5 – [
0.007 0.047 0.059 0.375 0.650 0.137
0,18 1,2 1,5 9,525 16,5 3,47
16NR2.5ISO-A2 2,5 – [
0.007 0.047 0.059 0.375 0.650 0.137
135
www.secotools.com
Thread turning
Inserts
Grades

Thread turning

mm TPI
0,21 1,2 1,5 9,525 16,5 3,47
16NR3.0ISO 3 – [ [ [ [
0.008 0.047 0.059 0.375 0.650 0.137
0,21 1,2 1,5 9,525 16,5 3,47
16NR3.0ISO-A 3 – [ [
0.008 0.047 0.059 0.375 0.650 0.137
0,21 1,2 1,5 9,525 16,5 3,47
16NR3.0ISO-A1 3 – [
0.008 0.047 0.059 0.375 0.650 0.137
0,21 1,2 1,5 9,525 16,5 3,47
16NR3.0ISO-A2 3 – [
0.008 0.047 0.059 0.375 0.650 0.137
0,21 2,8 4,3 15,875 27,0 6,15
27NR3.0ISO2M 3 – [
0.008 0.110 0.169 0.625 1.063 0.242
MDT
0,25 1,9 2,3 12,7 22,0 4,71

22NR3.5ISO 3,5 – [ [ [
0.010 0.075 0.091 0.500 0.866 0.185
0,28 2,0 2,5 12,7 22,0 4,71
22NR4.0ISO 4 – [ [ [ [
0.011 0.079 0.098 0.500 0.866 0.185
0,32 2,1 2,5 12,7 22,0 4,71
22NR4.5ISO 4,5 – [ [
0.013 0.083 0.098 0.500 0.866 0.185
0,35 1,8 2,5 12,7 22,0 4,71
22NR5.0ISO 5 – [ [ [
0.014 0.071 0.098 0.500 0.866 0.185
0,38 2,2 3,2 15,875 27,0 6,15
27NR5.5ISO 5,5 – [
0.015 0.087 0.126 0.625 1.063 0.242
Mini-Shaft™
0,42 2,2 3,2 15,875 27,0 6,15

27NR6.0ISO 6 – [ [
0.017 0.087 0.126 0.625 1.063 0.242
[ Stock standard.
Grades

mm TPI
0,03 0,8 0,8 6,35 11,0 3,0
11NL0.5ISO 0,5 – [
0.001 0.031 0.031 0.250 0.433 0.118
Thread milling
0,03 0,8 0,8 9,525 16,5 3,47

16NL0.5ISO 0,5 – [
0.001 0.031 0.031 0.375 0.650 0.137
0,04 0,8 0,8 6,35 11,0 3,0
11NL0.75ISO 0,75 – [
0.002 0.031 0.031 0.250 0.433 0.118
0,04 0,8 0,8 9,525 16,5 3,47
16NL0.75ISO 0,75 – [
0.002 0.031 0.031 0.375 0.650 0.137
0,07 0,8 0,8 6,35 11,0 3,0
11NL1.0ISO 1 – [
0.003 0.031 0.031 0.250 0.433 0.118
0,07 0,8 0,8 9,525 16,5 3,47
16NL1.0ISO 1 – [ [
0.003 0.031 0.031 0.375 0.650 0.137
Thread tapping
0,09 0,8 0,8 6,35 11,0 3,0

11NL1.25ISO 1,25 – [
0.004 0.031 0.031 0.250 0.433 0.118
0,09 0,8 0,8 9,525 16,5 3,47
16NL1.25ISO 1,25 – [
0.004 0.031 0.031 0.375 0.650 0.137
0,12 0,8 0,8 6,35 11,0 3,0
11NL1.5ISO 1,5 – [
0.005 0.031 0.031 0.250 0.433 0.118
0,12 0,8 0,8 9,525 16,5 3,47
16NL1.5ISO 1,5 – [ [
0.005 0.031 0.031 0.375 0.650 0.137
0,12 1,2 1,5 9,525 16,5 3,47
16NL1.75ISO 1,75 – [
0.005 0.047 0.059 0.375 0.650 0.137
0,17 1,2 1,5 9,525 16,5 3,47
16NL2.0ISO 2 – [
0.007 0.047 0.059 0.375 0.650 0.137
0,18 1,2 1,5 9,525 16,5 3,47
16NL2.5ISO 2,5 – [
Annex
0.007 0.047 0.059 0.375 0.650 0.137

0,21 1,2 1,5 9,525 16,5 3,47
16NL3.0ISO 3 – [
0.008 0.047 0.059 0.375 0.650 0.137
0,25 1,9 2,3 12,7 22,0 4,71
22NL3.5ISO 3,5 – [
0.010 0.075 0.091 0.500 0.866 0.185
136
www.secotools.com
Thread turning
Inserts
Grades
Thread turning
mm TPI
0,28 2,0 2,5 12,7 22,0 4,71
22NL4.0ISO 4 – [
0.011 0.079 0.098 0.500 0.866 0.185
0,32 2,1 2,5 12,7 22,0 4,71
22NL4.5ISO 4,5 – [
0.013 0.083 0.098 0.500 0.866 0.185
0,35 1,8 2,5 12,7 22,0 4,71
22NL5.0ISO 5 – [
0.014 0.071 0.098 0.500 0.866 0.185
[ Stock standard.
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
137
www.secotools.com
Thread turning
Inserts
UN – External Threading
Snap-Tap®
Thread turning
ANSI B1.1 - 1983

3A
16ER..A 16ER..A1 16ER..A2 16ER..TT 16Ex/22Ex/27ER 22ER..M

MDT
Grades

mm TPI
0,79 2,2 3,2 15,875 27,0 6,15
27ER4UN – 4 [
0.031 0.087 0.126 0.625 1.063 0.242
0,6 1,8 2,5 12,7 22,0 4,71
22ER5UN – 5 [
Mini-Shaft™
0.024 0.071 0.098 0.500 0.866 0.185

0,52 2,0 2,5 12,7 22,0 4,71
22ER6UN – 6 [ [
0.020 0.079 0.098 0.500 0.866 0.185
0,47 1,8 2,5 12,7 22,0 4,71
22ER7UN – 7 [ [
0.019 0.071 0.098 0.500 0.866 0.185
0,38 1,2 1,5 9,525 16,5 3,47
16ER8UN – 8 [ [ [ [
0.015 0.047 0.059 0.375 0.650 0.137
0,43 1,2 1,5 9,525 16,5 3,47
16ER8UN-A – 8 [ [
0.017 0.047 0.059 0.375 0.650 0.137
0,43 1,2 1,5 9,525 16,5 3,47
16ER8UN-A1 – 8 [
0.017 0.047 0.059 0.375 0.650 0.137
Thread milling
0,43 1,2 1,5 9,525 16,5 3,47

16ER8UN-A2 – 8 [
0.017 0.047 0.059 0.375 0.650 0.137
0,34 1,2 1,5 9,525 16,5 3,47
16ER9UN – 9 [ [
0.013 0.047 0.059 0.375 0.650 0.137
0,34 1,2 1,5 9,525 16,5 3,47
16ER10UN – 10 [ [
0.013 0.047 0.059 0.375 0.650 0.137
0,28 1,2 1,5 9,525 16,5 3,47
16ER11UN – 11 [ [
0.011 0.047 0.059 0.375 0.650 0.137
0,26 1,2 1,5 9,525 16,5 3,47
16ER12UN – 12 [ [ [ [
0.010 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
Thread tapping
16ER12UN-A – 12 [ [
0.011 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
16ER12UN-A1 – 12 [
0.011 0.047 0.059 0.375 0.650 0.137
0,29 1,2 1,5 9,525 16,5 3,47
16ER12UN-A2 – 12 [
0.011 0.047 0.059 0.375 0.650 0.137
0,29 1,7 2,6 9,525 16,5 3,47
16ER12UN-TT – 12 [
0.011 0.067 0.102 0.375 0.650 0.137
0,26 2,0 3,1 12,7 22,0 4,71
22ER12UN2M – 12 [
0.010 0.079 0.122 0.500 0.866 0.185
0,24 1,2 1,5 9,525 16,5 3,47
16ER13UN – 13 [
0.009 0.047 0.059 0.375 0.650 0.137
0,22 1,2 1,5 9,525 16,5 3,47
16ER14UN – 14 [ [ [ [
0.009 0.047 0.059 0.375 0.650 0.137
Annex
0,22 1,2 1,5 9,525 16,5 3,47

16ER14UN-A – 14 [ [
0.009 0.047 0.059 0.375 0.650 0.137
0,22 1,2 1,5 9,525 16,5 3,47
16ER14UN-A1 – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
138
www.secotools.com
Thread turning
Inserts
Grades
Thread turning
mm TPI
0,22 1,2 1,5 9,525 16,5 3,47
16ER14UN-A2 – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,22 1,2 0,8 9,525 16,5 3,47
16ER16UN – 16 [ [ [ [
0.009 0.047 0.031 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16ER16UN-A – 16 [ [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16ER16UN-A1 – 16 [
0.009 0.031 0.031 0.375 0.650 0.137
0,22 0,8 0,8 9,525 16,5 3,47
16ER16UN-A2 – 16 [
0.009 0.031 0.031 0.375 0.650 0.137
MDT
0,21 1,4 1,9 9,525 16,5 3,47
16ER16UN-TT – 16 [
0.008 0.055 0.075 0.375 0.650 0.137
0,21 2,5 4,0 12,7 22,0 4,71
22ER16UN3M – 16 [
0.008 0.098 0.157 0.500 0.866 0.185
0,18 1,2 0,8 9,525 16,5 3,47
16ER18UN – 18 [ [ [
0.007 0.047 0.031 0.375 0.650 0.137
0,18 0,8 0,8 9,525 16,5 3,47
16ER18UN-A – 18 [ [
0.007 0.031 0.031 0.375 0.650 0.137
0,18 0,8 0,8 9,525 16,5 3,47
16ER18UN-A1 – 18 [
0.007 0.031 0.031 0.375 0.650 0.137
Mini-Shaft™
0,18 0,8 0,8 9,525 16,5 3,47
16ER18UN-A2 – 18 [
0.007 0.031 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16ER20UN – 20 [ [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16ER20UN-A – 20 [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16ER20UN-A1 – 20 [
0.006 0.031 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16ER20UN-A2 – 20 [
0.006 0.031 0.031 0.375 0.650 0.137
0,16 1,2 1,6 9,525 16,5 3,47
16ER20UN-TT – 20 [
Thread milling
0.006 0.047 0.063 0.375 0.650 0.137
0,13 0,8 0,8 9,525 16,5 3,47
16ER24UN – 24 [ [ [
0.005 0.031 0.031 0.375 0.650 0.137
0,11 0,8 0,8 9,525 16,5 3,47
16ER28UN – 28 [ [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16ER32UN – 32 [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,08 1,2 0,5 9,525 16,5 3,47
16ER40UN – 40 [
0.003 0.047 0.020 0.375 0.650 0.137
Grades
Thread tapping

mm TPI
0,6 1,8 2,5 12,7 22,0 4,71
22EL5UN – 5 [
0.024 0.071 0.098 0.500 0.866 0.185
0,52 2,0 2,5 12,7 22,0 4,71
22EL6UN – 6 [
0.020 0.079 0.098 0.500 0.866 0.185
0,47 1,8 2,5 12,7 22,0 4,71
22EL7UN – 7 [
0.019 0.071 0.098 0.500 0.866 0.185
0,38 1,2 1,5 9,525 16,5 3,47
16EL8UN – 8 [
0.015 0.047 0.059 0.375 0.650 0.137
Annex
0,34 1,2 1,5 9,525 16,5 3,47

16EL9UN – 9 [
0.013 0.047 0.059 0.375 0.650 0.137
0,31 1,2 1,5 9,525 16,5 3,47
16EL10UN – 10 [
0.012 0.047 0.059 0.375 0.650 0.137
0,28 1,2 1,5 9,525 16,5 3,47
16EL11UN – 11 [
0.011 0.047 0.059 0.375 0.650 0.137
139
www.secotools.com
Thread turning
Inserts
Grades

Thread turning

mm TPI
0,26 1,2 1,5 9,525 16,5 3,47
16EL12UN – 12 [
0.010 0.047 0.059 0.375 0.650 0.137
0,22 1,2 1,5 9,525 16,5 3,47
16EL14UN – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,22 1,2 0,8 9,525 16,5 3,47
16EL16UN – 16 [
0.009 0.047 0.031 0.375 0.650 0.137
0,18 1,2 0,8 9,525 16,5 3,47
16EL18UN – 18 [
0.007 0.047 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16EL20UN – 20 [
0.006 0.031 0.031 0.375 0.650 0.137
MDT
0,13 0,8 0,8 9,525 16,5 3,47

16EL24UN – 24 [
0.005 0.031 0.031 0.375 0.650 0.137
0,11 0,8 0,8 9,525 16,5 3,47
16EL28UN – 28 [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16EL32UN – 32 [
0.004 0.031 0.031 0.375 0.650 0.137
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
140
www.secotools.com
Thread turning
Inserts
UN – Internal Threading
Snap-Tap®
Thread turning
ANSI B1.1 - 1983
3B
09NR/11Nx/16Nx/22Nx/27NR 16NR/22NR..M 16NR..A 16NR..A1 16NR..A2 16NR..TT
MDT
Grades

mm TPI
0,45 2,2 3,2 15,875 27,0 6,15
27NR4UN – 4 [
0.018 0.087 0.126 0.625 1.063 0.242
0,36 1,8 2,5 12,7 22,0 4,71
22NR5UN – 5 [ [
0.014 0.071 0.098 0.500 0.866 0.185
Mini-Shaft™
0,3 2,2 2,5 12,7 22,0 4,71
22NR6UN – 6 [ [
0.012 0.087 0.098 0.500 0.866 0.185
0,25 2,0 2,4 12,7 22,0 4,71
22NR7UN – 7 [
0.010 0.079 0.094 0.500 0.866 0.185
0,25 1,2 1,5 9,525 16,5 3,47
16NR8UN – 8 [ [ [ [
0.010 0.047 0.059 0.375 0.650 0.137
0,25 1,2 1,5 9,525 16,5 3,47
16NR8UN-A – 8 [ [
0.010 0.047 0.059 0.375 0.650 0.137
0,25 1,2 1,5 9,525 16,5 3,47
16NR8UN-A1 – 8 [
0.010 0.047 0.059 0.375 0.650 0.137
0,25 1,2 1,5 9,525 16,5 3,47
Thread milling
16NR8UN-A2 – 8 [
0.010 0.047 0.059 0.375 0.650 0.137
0,19 1,2 1,5 9,525 16,5 3,47
16NR9UN – 9 [
0.007 0.047 0.059 0.375 0.650 0.137
0,18 1,2 1,5 9,525 16,5 3,47
16NR10UN – 10 [ [ [
0.007 0.047 0.059 0.375 0.650 0.137
0,16 1,2 1,5 9,525 16,5 3,47
16NR11UN – 11 [ [
0.006 0.047 0.059 0.375 0.650 0.137
0,15 1,2 1,5 9,525 16,5 3,47
16NR12UN – 12 [ [ [ [
0.006 0.047 0.059 0.375 0.650 0.137
0,15 1,2 1,5 9,525 16,5 3,47
16NR12UN-A – 12 [ [
0.006 0.047 0.059 0.375 0.650 0.137
Thread tapping
0,15 1,2 1,5 9,525 16,5 3,47

16NR12UN-A1 – 12 [
0.006 0.047 0.059 0.375 0.650 0.137
0,15 1,5 1,5 9,525 16,5 3,47
16NR12UN-A2 – 12 [
0.006 0.059 0.059 0.375 0.650 0.137
0,16 1,65 2,45 9,525 16,5 3,47
16NR12UN-TT – 12 [
0.006 0.065 0.096 0.375 0.650 0.137
0,15 2,0 3,0 12,7 22,0 4,71
22NR12UN2M – 12 [
0.006 0.079 0.118 0.500 0.866 0.185
0,15 3,0 5,0 12,7 22,0 4,71
22NR12UN3M – 12 [
0.006 0.118 0.197 0.500 0.866 0.185
0,15 0,7 0,9 5,56 9,6 2,4
09NR13UN – 13 [
0.006 0.028 0.035 0.219 0.378 0.094
Annex
0,15 1,2 1,5 9,525 16,5 3,47

16NR13UN – 13 [
0.006 0.047 0.059 0.375 0.650 0.137
0,14 0,8 0,9 6,35 11,0 3,0
11NR14UN – 14 [ [
0.006 0.031 0.035 0.250 0.433 0.118
0,14 1,2 1,5 9,525 16,5 3,47
16NR14UN – 14 [ [ [ [
0.006 0.047 0.059 0.375 0.650 0.137
141
www.secotools.com
Thread turning
Inserts
Grades

Thread turning

mm TPI
0,14 1,2 1,3 9,525 16,5 3,47
16NR14UN-A – 14 [ [
0.006 0.047 0.051 0.375 0.650 0.137
0,14 1,2 1,3 9,525 16,5 3,47
16NR14UN-A1 – 14 [
0.006 0.047 0.051 0.375 0.650 0.137
0,14 1,2 1,3 9,525 16,5 3,47
16NR14UN-A2 – 14 [
0.006 0.047 0.051 0.375 0.650 0.137
0,13 0,8 0,8 6,35 11,0 3,0
11NR16UN – 16 [ [
0.005 0.031 0.031 0.250 0.433 0.118
0,13 0,8 0,8 9,525 16,5 3,47
16NR16UN – 16 [ [ [ [
0.005 0.031 0.031 0.375 0.650 0.137
MDT
0,13 1,5 2,3 9,525 16,5 3,47

16NR16UN2M – 16 [
0.005 0.059 0.091 0.375 0.650 0.137
0,12 0,8 0,8 9,525 16,5 3,47
16NR16UN-A – 16 [ [
0.005 0.031 0.031 0.375 0.650 0.137
0,12 0,8 0,8 9,525 16,5 3,47
16NR16UN-A1 – 16 [
0.005 0.031 0.031 0.375 0.650 0.137
0,12 0,8 0,8 9,525 16,5 3,47
16NR16UN-A2 – 16 [
0.005 0.031 0.031 0.375 0.650 0.137
0,13 1,4 1,9 9,525 16,5 3,47
16NR16UN-TT – 16 [
0.005 0.055 0.075 0.375 0.650 0.137
Mini-Shaft™
0,13 2,4 3,8 12,7 22,0 4,71

22NR16UN3M – 16 [
0.005 0.094 0.150 0.500 0.866 0.185
0,1 0,7 0,8 5,56 9,6 2,4
09NR18UN – 18 [
0.004 0.028 0.031 0.219 0.378 0.094
0,1 0,8 0,8 6,35 11,0 3,0
11NR18UN – 18 [ [
0.004 0.031 0.031 0.250 0.433 0.118
0,1 0,8 0,8 9,525 16,5 3,47
16NR18UN – 18 [ [ [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,1 0,8 0,8 9,525 16,5 3,47
16NR18UN-A – 18 [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,1 0,8 0,8 9,525 16,5 3,47
16NR18UN-A1 – 18 [
Thread milling
0.004 0.031 0.031 0.375 0.650 0.137

0,1 0,8 0,8 9,525 16,5 3,47
16NR18UN-A2 – 18 [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,7 0,8 5,56 9,6 2,4
09NR20UN – 20 [
0.004 0.028 0.031 0.219 0.378 0.094
0,09 0,8 0,8 6,35 11,0 3,0
11NR20UN – 20 [ [
0.004 0.031 0.031 0.250 0.433 0.118
0,09 0,8 0,8 9,525 16,5 3,47
16NR20UN – 20 [ [ [ [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16NR20UN-A – 20 [ [
0.004 0.031 0.031 0.375 0.650 0.137
Thread tapping
0,09 0,8 0,8 9,525 16,5 3,47

16NR20UN-A1 – 20 [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16NR20UN-A2 – 20 [
0.004 0.031 0.031 0.375 0.650 0.137
0,07 0,8 0,8 6,35 11,0 3,0
11NR24UN – 24 [ [
0.003 0.031 0.031 0.250 0.433 0.118
0,07 0,8 0,8 9,525 16,5 3,47
16NR24UN – 24 [ [ [
0.003 0.031 0.031 0.375 0.650 0.137
0,05 0,8 0,8 6,35 11,0 3,0
11NR28UN – 28 [ [
0.002 0.031 0.031 0.250 0.433 0.118
0,05 0,8 0,8 9,525 16,5 3,47
16NR28UN – 28 [ [
0.002 0.031 0.031 0.375 0.650 0.137
Annex
0,04 0,8 0,8 6,35 11,0 3,0

11NR32UN – 32 [ [
0.002 0.031 0.031 0.250 0.433 0.118
0,04 0,8 0,8 9,525 16,5 3,47
16NR32UN – 32 [ [ [
0.002 0.031 0.031 0.375 0.650 0.137
0,04 1,2 0,5 9,525 16,5 3,47
16NR40UN – 40 [
0.002 0.047 0.020 0.375 0.650 0.137
142
www.secotools.com
Thread turning
Inserts
Grades
Thread turning
mm TPI
0,3 2,2 2,5 12,7 22,0 4,71
22NL6UN – 6 [
0.012 0.087 0.098 0.500 0.866 0.185
0,25 2,0 2,4 12,7 22,0 4,71
22NL7UN – 7 [
0.010 0.079 0.094 0.500 0.866 0.185
0,25 1,2 1,5 9,525 16,5 3,47
16NL8UN – 8 [
0.010 0.047 0.059 0.375 0.650 0.137
0,18 1,2 1,5 9,525 16,5 3,47
16NL10UN – 10 [
0.007 0.047 0.059 0.375 0.650 0.137
0,16 1,2 1,5 9,525 16,5 3,47
16NL11UN – 11 [
0.006 0.047 0.059 0.375 0.650 0.137
MDT
0,15 1,2 1,5 9,525 16,5 3,47
16NL12UN – 12 [
0.006 0.047 0.059 0.375 0.650 0.137
0,14 0,8 0,9 6,35 11,0 3,0
11NL14UN – 14 [
0.006 0.031 0.035 0.250 0.433 0.118
0,14 1,2 1,5 9,525 16,5 3,47
16NL14UN – 14 [ [
0.006 0.047 0.059 0.375 0.650 0.137
0,13 0,8 0,8 6,35 11,0 3,0
11NL16UN – 16 [
0.005 0.031 0.031 0.250 0.433 0.118
0,13 0,8 0,8 9,525 16,5 3,47
16NL16UN – 16 [ [
0.005 0.031 0.031 0.375 0.650 0.137
Mini-Shaft™
0,1 0,8 0,8 6,35 11,0 3,0
11NL18UN – 18 [
0.004 0.031 0.031 0.250 0.433 0.118
0,1 0,8 0,8 9,525 16,5 3,47
16NL18UN – 18 [
0.004 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 6,35 11,0 3,0
11NL20UN – 20 [
0.004 0.031 0.031 0.250 0.433 0.118
0,09 0,8 0,8 9,525 16,5 3,47
16NL20UN – 20 [
0.004 0.031 0.031 0.375 0.650 0.137
0,07 0,8 0,8 6,35 11,0 3,0
11NL24UN – 24 [
0.003 0.031 0.031 0.250 0.433 0.118
0,07 0,8 0,8 9,525 16,5 3,47
16NL24UN – 24 [
Thread milling
0.003 0.031 0.031 0.375 0.650 0.137
0,05 0,8 0,8 9,525 16,5 3,47
16NL28UN – 28 [
0.002 0.031 0.031 0.375 0.650 0.137
0,04 0,8 0,8 9,525 16,5 3,47
16NL32UN – 32 [
0.002 0.031 0.031 0.375 0.650 0.137
[ Stock standard.
Thread tapping
Annex
143
www.secotools.com
Thread turning
Inserts
UNJ – External Threading

Snap-Tap®
Thread turning
BS4084 - 1996
MIL-SPECS - 8879A
3A
16Ex
MDT
Grades

mm TPI
0,5 1,2 1,5 9,525 16,5 3,47
16ER8UNJ – 8 [ [
0.020 0.047 0.059 0.375 0.650 0.137
0,405 1,2 1,5 9,525 16,5 3,47
16ER10UNJ – 10 [ [
Mini-Shaft™
0.016 0.047 0.059 0.375 0.650 0.137

0,34 1,2 1,5 9,525 16,5 3,47
16ER12UNJ – 12 [ [ [
0.013 0.047 0.059 0.375 0.650 0.137
0,295 1,2 1,5 9,525 16,5 3,47
16ER14UNJ – 14 [ [
0.012 0.047 0.059 0.375 0.650 0.137
0,255 1,2 0,8 9,525 16,5 3,47
16ER16UNJ – 16 [ [ [
0.010 0.047 0.031 0.375 0.650 0.137
0,23 1,2 0,8 9,525 16,5 3,47
16ER18UNJ – 18 [ [
0.009 0.047 0.031 0.375 0.650 0.137
0,208 0,8 0,8 9,525 16,5 3,47
16ER20UNJ – 20 [ [ [
0.008 0.031 0.031 0.375 0.650 0.137
Thread milling
0,175 0,8 0,8 9,525 16,5 3,47

16ER24UNJ – 24 [ [
0.007 0.031 0.031 0.375 0.650 0.137
0,148 0,8 0,8 9,525 16,5 3,47
16ER28UNJ – 28 [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,13 0,8 0,8 9,525 16,5 3,47
16ER32UNJ – 32 [ [
0.005 0.031 0.031 0.375 0.650 0.137
Grades

Thread tapping

mm TPI
0,34 1,2 1,5 9,525 16,5 3,47
16EL12UNJ – 12 [
0.013 0.047 0.059 0.375 0.650 0.137
[ Stock standard.
Annex
144
www.secotools.com
Thread turning
Inserts
UNJ – Internal Threading

Snap-Tap®
Thread turning
BS4084 - 1996
MIL-SPECS - 8879A
3B
16Ex
MDT
Grades

mm TPI
0,22 1,2 1,2 9,525 16,5 3,47
16NR8UNJ – 8 [
0.009 0.047 0.047 0.375 0.650 0.137
0,17 1,2 1,0 9,525 16,5 3,47
16NR10UNJ – 10 [
0.007 0.047 0.039 0.375 0.650 0.137
Mini-Shaft™
0,12 1,2 0,8 9,525 16,5 3,47
16NR12UNJ – 12 [
0.005 0.047 0.031 0.375 0.650 0.137
0,11 1,2 0,7 9,525 16,5 3,47
16NR14UNJ – 14 [
0.004 0.047 0.028 0.375 0.650 0.137
0,1 1,2 0,6 9,525 16,5 3,47
16NR16UNJ – 16 [
0.004 0.047 0.024 0.375 0.650 0.137
0,09 1,2 0,6 9,525 16,5 3,47
16NR18UNJ – 18 [
0.004 0.047 0.024 0.375 0.650 0.137
0,08 1,2 0,5 9,525 16,5 3,47
16NR20UNJ – 20 [
0.003 0.047 0.020 0.375 0.650 0.137
0,06 1,2 0,5 9,525 16,5 3,47
Thread milling
16NR24UNJ – 24 [
0.002 0.047 0.020 0.375 0.650 0.137
0,04 1,2 0,4 9,525 16,5 3,47
16NR28UNJ – 28 [
0.002 0.047 0.016 0.375 0.650 0.137
0,03 1,2 0,4 9,525 16,5 3,47
16NR32UNJ – 32 [
0.001 0.047 0.016 0.375 0.650 0.137
[ Stock standard.
Thread tapping
Annex
145
www.secotools.com
Thread turning
Inserts
MJ – External Threading
Snap-Tap®
Thread turning
ISO5855 - 1983
4h/6h
16Ex
MDT
Grades

mm TPI
0,16 0,8 0,8 9,525 16,5 3,47
16ER1.0MJ 1 – [ [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,21 0,8 0,8 9,525 16,5 3,47
16ER1.25MJ 1,25 – [
Mini-Shaft™
0.008 0.031 0.031 0.375 0.650 0.137

0,25 0,8 0,8 9,525 16,5 3,47
16ER1.5MJ 1,5 – [ [ [
0.010 0.031 0.031 0.375 0.650 0.137
0,32 1,2 1,5 9,525 16,5 3,47
16ER2.0MJ 2 – [
0.013 0.047 0.059 0.375 0.650 0.137
Grades

mm TPI
Thread milling
0,16 0,8 0,8 9,525 16,5 3,47

16EL1.0MJ 1 – [
0.006 0.031 0.031 0.375 0.650 0.137
0,25 0,8 0,8 9,525 16,5 3,47
16EL1.5MJ 1,5 – [
0.010 0.031 0.031 0.375 0.650 0.137
[ Stock standard.
Thread tapping
Annex
146
www.secotools.com
Thread turning
Inserts
MJ – Internal Threading
Snap-Tap®
Thread turning
ISO5855 - 1983
4H/5H
16Ex
MDT
Grades

mm TPI
0,06 1,2 0,4 9,525 16,5 3,47
16NR1.0MJ 1 – [
0.002 0.047 0.016 0.375 0.650 0.137
0,08 1,2 0,5 9,525 16,5 3,47
16NR1.25MJ 1,25 – [
0.003 0.047 0.020 0.375 0.650 0.137
Mini-Shaft™
0,09 1,2 0,6 9,525 16,5 3,47
16NR1.5MJ 1,5 – [
0.004 0.047 0.024 0.375 0.650 0.137
0,12 1,2 0,8 9,525 16,5 3,47
16NR2.0MJ 2 – [
0.005 0.047 0.031 0.375 0.650 0.137
[ Stock standard.
Thread milling
Thread tapping
Annex
147
www.secotools.com
Thread turning
Inserts
Whitworth, BSW – External Threading

Snap-Tap®
Thread turning
BS84 -1956
ISO228 - 1982
BS2779 - 1973
16ER..A 16ER..A1 16ER..A2 16ER..TT 16Ex/22Ex 22ER..M

MDT
Grades

mm TPI
0,63 1,7 2,5 12,7 22,0 4,71
22ER5W – 5 [ [
0.025 0.067 0.098 0.500 0.866 0.185
0,5 1,8 2,5 12,7 22,0 4,71
22ER6W – 6 [ [
Mini-Shaft™
0.020 0.071 0.098 0.500 0.866 0.185

0,43 1,8 2,5 12,7 22,0 4,71
22ER7W – 7 [ [
0.017 0.071 0.098 0.500 0.866 0.185
0,42 1,2 1,5 9,525 16,5 3,47
16ER8W – 8 [ [
0.017 0.047 0.059 0.375 0.650 0.137
0,31 1,2 1,5 9,525 16,5 3,47
16ER9W – 9 [
0.012 0.047 0.059 0.375 0.650 0.137
0,27 1,2 1,5 9,525 16,5 3,47
16ER10W – 10 [ [
0.011 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16ER11W – 11 [ [ [ [
0.012 0.047 0.059 0.375 0.650 0.137
Thread milling
0,3 1,2 1,5 9,525 16,5 3,47

16ER11W-A – 11 [ [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16ER11W-A1 – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16ER11W-A2 – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,8 2,8 9,525 16,5 3,47
16ER11W-TT – 11 [
0.012 0.071 0.110 0.375 0.650 0.137
0,3 2,3 3,5 12,7 22,0 4,71
22ER11W2M – 11 [
0.012 0.091 0.138 0.500 0.866 0.185
0,24 1,2 1,5 9,525 16,5 3,47
Thread tapping
16ER12W – 12 [ [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16ER14W – 14 [ [ [ [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16ER14W-A – 14 [ [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16ER14W-A1 – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16ER14W-A2 – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,5 2,2 9,525 16,5 3,47
16ER14W-TT – 14 [
0.009 0.059 0.087 0.375 0.650 0.137
0,2 0,8 0,8 9,525 16,5 3,47
16ER16W – 16 [ [
0.008 0.031 0.031 0.375 0.650 0.137
Annex
0,16 0,8 0,8 9,525 16,5 3,47

16ER18W – 18 [
0.006 0.031 0.031 0.375 0.650 0.137
0,15 0,8 0,8 9,525 16,5 3,47
16ER19W – 19 [ [ [ [
0.006 0.031 0.031 0.375 0.650 0.137
148
www.secotools.com
Thread turning
Inserts
Grades
Thread turning
mm TPI
0,16 0,8 0,8 9,525 16,5 3,47
16ER19W-A – 19 [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16ER19W-A1 – 19 [
0.006 0.031 0.031 0.375 0.650 0.137
0,16 0,8 0,8 9,525 16,5 3,47
16ER19W-A2 – 19 [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16ER20W – 20 [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16ER28W – 28 [ [
0.004 0.031 0.031 0.375 0.650 0.137
MDT
Grades

mm TPI
0,63 1,7 2,5 12,7 22,0 4,71
22EL5W – 5 [
0.025 0.067 0.098 0.500 0.866 0.185
0,5 1,8 2,5 12,7 22,0 4,71
22EL6W – 6 [
0.020 0.071 0.098 0.500 0.866 0.185
Mini-Shaft™
0,43 1,8 2,5 12,7 22,0 4,71
22EL7W – 7 [
0.017 0.071 0.098 0.500 0.866 0.185
0,42 1,2 1,5 9,525 16,5 3,47
16EL8W – 8 [
0.017 0.047 0.059 0.375 0.650 0.137
0,31 1,2 1,5 9,525 16,5 3,47
16EL9W – 9 [
0.012 0.047 0.059 0.375 0.650 0.137
0,27 1,2 1,5 9,525 16,5 3,47
16EL10W – 10 [
0.011 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16EL11W – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
Thread milling
16EL12W – 12 [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16EL14W – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,2 0,8 0,8 9,525 16,5 3,47
16EL16W – 16 [
0.008 0.031 0.031 0.375 0.650 0.137
0,15 0,8 0,8 9,525 16,5 3,47
16EL19W – 19 [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16EL20W – 20 [
0.006 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16EL28W – 28 [
0.004 0.031 0.031 0.375 0.650 0.137
Thread tapping
[ Stock standard.
Annex
149
www.secotools.com
Thread turning
Inserts
Whitworth, BSW – Internal Threading

Snap-Tap®
Thread turning
BS84 -1956
ISO228 - 1982
BS2779 - 1973
09NR/11Nx/16Nx/22Nx 11NR/16NR..A 11NR/16NR..A1 11NR/16NR..A2 16NR..TT 22NR..M

MDT
Grades

mm TPI
0,63 1,7 2,5 12,7 22,0 4,71
22NR5W – 5 [ [
0.025 0.067 0.098 0.500 0.866 0.185
0,5 1,8 2,5 12,7 22,0 4,71
22NR6W – 6 [ [
0.020 0.071 0.098 0.500 0.866 0.185
Mini-Shaft™
0,43 1,8 2,5 12,7 22,0 4,71

22NR7W – 7 [
0.017 0.071 0.098 0.500 0.866 0.185
0,42 1,2 1,5 9,525 16,5 3,47
16NR8W – 8 [ [
0.017 0.047 0.059 0.375 0.650 0.137
0,31 1,2 1,5 9,525 16,5 3,47
16NR9W – 9 [ [
0.012 0.047 0.059 0.375 0.650 0.137
0,27 1,2 1,5 9,525 16,5 3,47
16NR10W – 10 [ [ [
0.011 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16NR11W – 11 [ [ [ [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
Thread milling
16NR11W-A – 11 [ [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16NR11W-A1 – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16NR11W-A2 – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,31 1,8 2,8 9,525 16,5 3,47
16NR11W-TT – 11 [
0.012 0.071 0.110 0.375 0.650 0.137
0,3 2,3 3,5 12,7 22,0 4,71
22NR11W2M – 11 [
0.012 0.091 0.138 0.500 0.866 0.185
0,24 1,2 1,5 9,525 16,5 3,47
16NR12W – 12 [ [
0.009 0.047 0.059 0.375 0.650 0.137
Thread tapping
0,24 1,7 2,7 9,525 16,5 3,47

16NR12W-TT – 12 [
0.009 0.067 0.106 0.375 0.650 0.137
0,24 0,7 0,9 5,56 9,6 2,4
09NR14W – 14 [
0.009 0.028 0.035 0.219 0.378 0.094
0,24 0,7 0,9 6,35 11,0 3,0
11NR14W – 14 [ [ [ [
0.009 0.028 0.035 0.250 0.433 0.118
0,24 0,7 0,9 6,35 11,0 3,0
11NR14W-A – 14 [ [
0.009 0.028 0.035 0.250 0.433 0.118
0,24 0,7 0,9 6,35 11,0 3,0
11NR14W-A1 – 14 [
0.009 0.028 0.035 0.250 0.433 0.118
0,24 0,7 0,9 6,35 11,0 3,0
11NR14W-A2 – 14 [
0.009 0.028 0.035 0.250 0.433 0.118
Annex
0,24 1,2 1,5 9,525 16,5 3,47

16NR14W – 14 [ [ [ [
0.009 0.047 0.059 0.375 0.650 0.137
0,23 1,2 1,1 9,525 16,5 3,47
16NR14W-A – 14 [ [
0.009 0.047 0.043 0.375 0.650 0.137
0,23 1,2 1,1 9,525 16,5 3,47
16NR14W-A1 – 14 [
0.009 0.047 0.043 0.375 0.650 0.137
150
www.secotools.com
Thread turning
Inserts
Grades
mm mm mm mm mm mm
Thread turning
mm TPI CP200 CP300 CP500 TTP2050 H15
0,23 1,2 1,1 9,525 16,5 3,47
16NR14W-A2 – 14 [
0.009 0.047 0.043 0.375 0.650 0.137
0,23 1,5 2,2 9,525 16,5 3,47
16NR14W-TT – 14 [
0.009 0.059 0.087 0.375 0.650 0.137
0,2 0,8 0,8 9,525 16,5 3,47
16NR16W – 16 [ [
0.008 0.031 0.031 0.375 0.650 0.137
0,15 0,7 0,8 5,56 9,6 2,4
09NR19W – 19 [
0.006 0.028 0.031 0.219 0.378 0.094
0,15 0,8 0,8 6,35 11,0 3,0
11NR19W – 19 [ [ [ [
0.006 0.031 0.031 0.250 0.433 0.118
0,15 0,8 0,8 6,35 11,0 3,0
11NR19W-A – 19 [ [
0.006 0.031 0.031 0.250 0.433 0.118
MDT
0,15 0,8 0,8 6,35 11,0 3,0
11NR19W-A1 – 19 [
0.006 0.031 0.031 0.250 0.433 0.118
0,15 0,8 0,8 6,35 11,0 3,0
11NR19W-A2 – 19 [
0.006 0.031 0.031 0.250 0.433 0.118
0,15 0,8 0,8 9,525 16,5 3,47
16NR19W – 19 [ [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16NR20W – 20 [ [
0.006 0.031 0.031 0.375 0.650 0.137
0,09 0,8 0,8 9,525 16,5 3,47
16NR28W – 28 [
Mini-Shaft™
0.004 0.031 0.031 0.375 0.650 0.137
Grades

mm TPI
0,63 1,7 2,5 12,7 22,0 4,71
22NL5W – 5 [
0.025 0.067 0.098 0.500 0.866 0.185
0,5 1,8 2,5 12,7 22,0 4,71
22NL6W – 6 [
0.020 0.071 0.098 0.500 0.866 0.185
Thread milling
0,43 1,8 2,5 12,7 22,0 4,71
22NL7W – 7 [
0.017 0.071 0.098 0.500 0.866 0.185
0,42 1,2 1,5 9,525 16,5 3,47
16NL8W – 8 [
0.017 0.047 0.059 0.375 0.650 0.137
0,31 1,2 1,5 9,525 16,5 3,47
16NL9W – 9 [
0.012 0.047 0.059 0.375 0.650 0.137
0,27 1,2 1,5 9,525 16,5 3,47
16NL10W – 10 [
0.011 0.047 0.059 0.375 0.650 0.137
0,3 1,2 1,5 9,525 16,5 3,47
16NL11W – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16NL12W – 12 [
Thread tapping
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,2 0,9 6,35 11,0 3,0
11NL14W – 14 [
0.009 0.047 0.035 0.250 0.433 0.118
0,24 1,2 1,5 9,525 16,5 3,47
16NL14W – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,2 0,8 0,8 9,525 16,5 3,47
16NL16W – 16 [
0.008 0.031 0.031 0.375 0.650 0.137
0,15 0,8 0,8 6,35 11,0 3,0
11NL19W – 19 [
0.006 0.031 0.031 0.250 0.433 0.118
0,15 0,8 0,8 9,525 16,5 3,47
16NL19W – 19 [
0.006 0.031 0.031 0.375 0.650 0.137
0,14 0,8 0,8 9,525 16,5 3,47
16NL20W – 20 [
0.006 0.031 0.031 0.375 0.650 0.137
Annex
0,09 0,8 0,8 9,525 16,5 3,47

16NL28W – 28 [
0.004 0.031 0.031 0.375 0.650 0.137
[ Stock standard.
151
www.secotools.com
Thread turning
Inserts
BSPT – External Threading

Snap-Tap®
Thread turning
ISO228/1 35 21 1959 ISO7/1
16ER..TT
MDT
Grades

mm TPI
0,3 1,2 1,5 9,525 16,5 3,47
16ER11BSPT – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,8 2,8 9,525 16,5 3,47
16ER11BSPT-TT – 11 [
Mini-Shaft™
0.012 0.071 0.110 0.375 0.650 0.137

0,24 1,2 1,5 9,525 16,5 3,47
16ER14BSPT – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,5 2,2 9,525 16,5 3,47
16ER14BSPT-TT – 14 [
0.009 0.059 0.087 0.375 0.650 0.137
0,15 0,8 0,8 9,525 16,5 3,47
16ER19BSPT – 19 [
0.006 0.031 0.031 0.375 0.650 0.137
0,08 0,7 0,8 9,525 16,5 3,47
16ER28BSPT – 28 [
0.003 0.028 0.031 0.375 0.650 0.137
Grades
Thread milling

mm TPI
0,3 1,2 1,5 9,525 16,5 3,47
16EL11BSPT – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16EL14BSPT – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
[ Stock standard.
Thread tapping
Annex
152
www.secotools.com
Thread turning
Inserts
BSPT – Internal Threading

Snap-Tap®
Thread turning
ISO228/1 35 21 1959 ISO7/1
09NR/16Nx.. 16NR..TT
MDT
Grades

mm TPI
0,3 1,2 1,5 9,525 16,5 3,47
16NR11BSPT – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,3 1,8 2,8 9,525 16,5 3,47
16NR11BSPT-TT – 11 [
0.012 0.071 0.110 0.375 0.650 0.137
Mini-Shaft™
0,24 1,2 1,5 9,525 16,5 3,47
16NR14BSPT – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
0,24 1,5 2,2 9,525 16,5 3,47
16NR14BSPT-TT – 14 [
0.009 0.059 0.087 0.375 0.650 0.137
0,15 0,8 0,8 5,56 9,6 2,4
09NR19BSPT – 19 [
0.006 0.031 0.031 0.219 0.378 0.094
Grades
Thread milling
mm TPI
0,3 1,2 1,5 9,525 16,5 3,47
16NL11BSPT – 11 [
0.012 0.047 0.059 0.375 0.650 0.137
0,24 1,2 1,5 9,525 16,5 3,47
16NL14BSPT – 14 [
0.009 0.047 0.059 0.375 0.650 0.137
[ Stock standard.
Thread tapping
Annex
153
www.secotools.com
Thread turning
Inserts
NPT– External Threading

Snap-Tap®
Thread turning
ANSI B1.20.1 - 1983
16ER..A1 16ER..A2 16Ex.. 22ER/27ER..M

MDT
Grades

mm TPI
0,07 1,1 1,6 9,525 16,5 3,47
16ER8NPT – 8 [ [
0.003 0.043 0.063 0.375 0.650 0.137
0,07 1,1 1,5 9,525 16,5 3,47
16ER11.5NPT – 11.5 [ [
Mini-Shaft™
0.003 0.043 0.059 0.375 0.650 0.137

0,09 1,1 1,5 9,525 16,5 3,47
16ER11.5NPT-A1 – 11.5 [
0.004 0.043 0.059 0.375 0.650 0.137
0,09 1,1 1,5 9,525 16,5 3,47
16ER11.5NPT-A2 – 11.5 [
0.004 0.043 0.059 0.375 0.650 0.137
0,07 2,1 3,3 12,7 22,0 4,71
22ER11.5NPT2M – 11.5 [
0.003 0.083 0.130 0.500 0.866 0.185
0,07 1,1 1,5 9,525 16,5 3,47
16ER14NPT – 14 [ [
0.003 0.043 0.059 0.375 0.650 0.137
0,06 0,7 0,8 9,525 16,5 3,47
16ER18NPT – 18 [ [
0.002 0.028 0.031 0.375 0.650 0.137
Thread milling
0,04 0,7 0,8 9,525 16,5 3,47

16ER27NPT – 27 [
0.002 0.028 0.031 0.375 0.650 0.137
Grades

mm TPI
0,09 1,1 1,6 9,525 16,5 3,47
16EL8NPT – 8 [
0.004 0.043 0.063 0.375 0.650 0.137
Thread tapping
0,07 1,1 1,5 9,525 16,5 3,47

16EL11.5NPT – 11.5 [
0.003 0.043 0.059 0.375 0.650 0.137
0,07 1,1 1,5 9,525 16,5 3,47
16EL14NPT – 14 [
0.003 0.043 0.059 0.375 0.650 0.137
0,06 0,7 0,8 9,525 16,5 3,47
16EL18NPT – 18 [
0.002 0.028 0.031 0.375 0.650 0.137
[ Stock standard.
Annex
154
www.secotools.com
Thread turning
Inserts
NPT – Internal Threading

Snap-Tap®
Thread turning
ANSI B1.20.1 - 1983
16NR..A1 16NR..A2 22NR..M
MDT
Grades

mm TPI
0,1 1,1 1,6 9,525 16,5 3,47
16NR8NPT – 8 [ [
0.004 0.043 0.063 0.375 0.650 0.137
0,12 1,1 1,6 9,525 16,5 3,47
16NR8NPT-A2 – 8 [
0.005 0.043 0.063 0.375 0.650 0.137
Mini-Shaft™
0,09 1,1 1,5 9,525 16,5 3,47
16NR11.5NPT – 11.5 [ [
0.004 0.043 0.059 0.375 0.650 0.137
0,1 1,1 1,5 9,525 16,5 3,47
16NR11.5NPT-A1 – 11.5 [
0.004 0.043 0.059 0.375 0.650 0.137
0,1 1,1 1,5 9,525 16,5 3,47
16NR11.5NPT-A2 – 11.5 [
0.004 0.043 0.059 0.375 0.650 0.137
0,05 2,1 3,3 12,7 22,0 4,71
22NR11.5NPT2M – 11.5 [
0.002 0.083 0.130 0.500 0.866 0.185
0,07 0,7 1,0 6,35 11,0 3,0
11NR14NPT – 14 [
0.003 0.028 0.039 0.250 0.433 0.118
0,08 1,1 1,5 9,525 16,5 3,47
Thread milling
16NR14NPT – 14 [ [
0.003 0.043 0.059 0.375 0.650 0.137
0,08 1,1 1,5 9,525 16,5 3,47
16NR14NPT-A2 – 14 [
0.003 0.043 0.059 0.375 0.650 0.137
0,06 0,7 0,8 5,56 9,6 2,4
09NR18NPT – 18 [
0.002 0.028 0.031 0.219 0.378 0.094
0,06 0,7 0,8 6,35 11,0 3,0
11NR18NPT – 18 [
0.002 0.028 0.031 0.250 0.433 0.118
0,04 0,7 0,8 5,56 9,6 2,4
09NR27NPT – 27 [
0.002 0.028 0.031 0.219 0.378 0.094
Grades
Thread tapping

mm TPI
0,1 1,2 1,6 9,525 16,5 3,47
16NL8NPT – 8 [
0.004 0.047 0.063 0.375 0.650 0.137
0,07 3,0 4,8 15,875 27,0 6,15
27ER8NPT2M – 8 [
0.003 0.118 0.189 0.625 1.063 0.242
0,09 1,1 1,5 9,525 16,5 3,47
16NL11.5NPT – 11.5 [
0.004 0.043 0.059 0.375 0.650 0.137
0,08 1,1 1,5 9,525 16,5 3,47
16NL14NPT – 14 [
0.003 0.043 0.059 0.375 0.650 0.137
Annex
[ Stock standard.
155
www.secotools.com
Thread turning
Inserts
NPTF– External Threading

Snap-Tap®
Thread turning
ANSI B1.4 - 1976

ANSI B1.20.3 - 1976
16ER..
MDT
Grades

mm TPI
0,06 1,1 1,5 9,525 16,5 3,47
16ER11.5NPTF – 11.5 [
0.002 0.043 0.059 0.375 0.650 0.137
0,05 1,1 1,5 9,525 16,5 3,47
16ER14NPTF – 14 [
Mini-Shaft™
0.002 0.043 0.059 0.375 0.650 0.137

0,04 0,7 0,8 9,525 16,5 3,47
16ER18NPTF – 18 [
0.002 0.028 0.031 0.375 0.650 0.137
0,04 0,7 0,8 9,525 16,5 3,47
16ER27NPTF – 27 [
0.002 0.028 0.031 0.375 0.650 0.137
[ Stock standard.
Thread milling
Thread tapping
Annex
156
www.secotools.com
Thread turning
Inserts
NPTF – Internal Threading

Snap-Tap®
Thread turning
ANSI B1.4 - 1976
ANSI B1.20.3 - 1976
11NR/16Nx
MDT
Grades

mm TPI
0,06 1,1 1,5 9,525 16,5 3,47
16NR11.5NPTF – 11.5 [
0.002 0.043 0.059 0.375 0.650 0.137
0,05 1,1 1,5 9,525 16,5 3,47
16NR14NPTF – 14 [
0.002 0.043 0.059 0.375 0.650 0.137
Mini-Shaft™
0,04 0,7 0,8 6,35 11,0 3,0
11NR18NPTF – 18 [
0.002 0.028 0.031 0.250 0.433 0.118
Grades

mm TPI
0,06 1,1 1,5 9,525 16,5 3,47
16NL11.5NPTF – 11.5 [
0.002 0.043 0.059 0.375 0.650 0.137
Thread milling
[ Stock standard.
Thread tapping
Annex
157
www.secotools.com
Thread turning
Inserts
Round-DIN405 – External Threading

Snap-Tap®
Thread turning
DIN405 - 1981
7h/6h
16ER/22Ex/27ER
MDT
Grades

mm TPI
1,46 2,2 3,2 15,875 27,0 6,15
27ER4RD – 4 [
0.057 0.087 0.126 0.625 1.063 0.242
0,97 1,3 1,8 9,525 16,5 3,47
16ER6RD – 6 [
Mini-Shaft™
0.038 0.051 0.071 0.375 0.650 0.137

0,97 2,0 2,5 12,7 22,0 4,71
22ER6RD – 6 [
0.038 0.079 0.098 0.500 0.866 0.185
0,73 1,3 1,5 9,525 16,5 3,47
16ER8RD – 8 [
0.029 0.051 0.059 0.375 0.650 0.137
0,58 1,3 1,5 9,525 16,5 3,47
16ER10RD – 10 [
0.023 0.051 0.059 0.375 0.650 0.137
Grades

Thread milling

mm TPI
0,97 2,0 2,5 12,7 22,0 4,71
22EL6RD – 6 [
0.038 0.079 0.098 0.500 0.866 0.185
[ Stock standard.
Thread tapping
Annex
158
www.secotools.com
Thread turning
Inserts
Round-DIN405 – Internal Threading

Snap-Tap®
Thread turning
DIN405 - 1981
7h/6h
16NR/22Nx/27NR
MDT
Grades

mm TPI
1,31 2,2 3,2 15,875 27,0 6,15
27NR4RD – 4 [
0.052 0.087 0.126 0.625 1.063 0.242
0,87 1,3 1,8 9,525 16,5 3,47
16NR6RD – 6 [
0.034 0.051 0.071 0.375 0.650 0.137
Mini-Shaft™
0,87 2,0 2,5 12,7 22,0 4,71
22NR6RD – 6 [
0.034 0.079 0.098 0.500 0.866 0.185
0,69 1,3 1,5 9,525 16,5 3,47
16NR8RD – 8 [
0.027 0.051 0.059 0.375 0.650 0.137
0,51 1,3 1,5 9,525 16,5 3,47
16NR10RD – 10 [
0.020 0.051 0.059 0.375 0.650 0.137
Grades
Thread milling
mm TPI
0,87 2,0 2,5 12,7 22,0 4,71
22NL6RD – 6 [
0.034 0.079 0.098 0.500 0.866 0.185
[ Stock standard.
Thread tapping
Annex
159
www.secotools.com
Thread turning
Inserts
TR-DIN103 – External Threading

Snap-Tap®
Thread turning
DIN103 - 1977
ISO2901/3 - 1977
7e
16Ex/22Ex27ER 20ER/26ER
MDT
Grades
Insert Part No. Right Pitch W1 PDY PDX IC L S Coated Uncoated

mm TPI
– 0,9 0,8 9,525 16,5 3,47
16ER1.5TR 1,5 – [
– 0.035 0.031 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16ER2.0TR 2 – [
Mini-Shaft™
– 0.051 0.059 0.375 0.650 0.137

– 1,3 1,6 9,525 16,5 3,47
16ER3.0TR 3 – [
– 0.051 0.063 0.375 0.650 0.137
12,7 – 3,2 – 20,0 6,3
20ER7.0TR 7 – [ [
0.500 – 0.126 – 0.787 0.248
12,7 – 3,2 – 20,0 6,3
20ER8.0TR 8 – [ [
0.500 – 0.126 – 0.787 0.248
– 2,0 2,5 12,7 22,0 4,71
22ER4.0TR 4 – [
– 0.079 0.098 0.500 0.866 0.185
– 2,0 2,3 12,7 22,0 4,71
22ER5.0TR 5 – [ [
– 0.079 0.091 0.500 0.866 0.185
Thread milling
15,875 – 5,0 – 26,0 7,88

26ER10.0TR 10 – [ [
0.625 – 0.197 – 1.024 0.310
15,875 – 5,0 – 26,0 7,88
26ER12.0TR 12 – [ [
0.625 – 0.197 – 1.024 0.310
15,875 – 5,1 – 26,0 7,88
26ER14.0TR 14 – [
0.625 – 0.201 – 1.024 0.310
15,875 – 5,0 – 26,0 7,88
26ER9.0TR 9 – [
0.625 – 0.197 – 1.024 0.310
– 2,5 3,2 15,875 27,0 6,15
27ER6.0TR 6 – [
– 0.098 0.126 0.625 1.063 0.242
Thread tapping
Grades
Insert Part No. Left Pitch W1 PDY PDX IC L S Coated Uncoated

mm TPI
– 0,9 0,8 9,525 16,5 3,47
16EL1.5TR 1,5 – [
– 0.035 0.031 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16EL2.0TR 2 – [
– 0.051 0.059 0.375 0.650 0.137
– 1,3 1,6 9,525 16,5 3,47
16EL3.0TR 3 – [
– 0.051 0.063 0.375 0.650 0.137
– 2,0 2,5 12,7 22,0 4,71
Annex
22EL4.0TR 4 – [
– 0.079 0.098 0.500 0.866 0.185
– 2,0 2,3 12,7 22,0 4,71
22EL5.0TR 5 – [
– 0.079 0.091 0.500 0.866 0.185
[ Stock standard.
160
www.secotools.com
Thread turning
Inserts
TR-DIN103 – Internal Threading

Snap-Tap®
Thread turning
DIN103 - 1977
ISO2901/3 - 1977
7H
16Nx/22Nx/27NR 20NR/26NR
MDT
Grades
Insert Part No. Right Pitch W1 PDY PDX IC L S Coated Uncoated

mm TPI
– 0,9 0,8 9,525 16,5 3,47
16NR1.5TR 1,5 – [
– 0.035 0.031 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16NR2.0TR 2 – [
– 0.051 0.059 0.375 0.650 0.137
Mini-Shaft™
– 1,3 1,6 9,525 16,5 3,47
16NR3.0TR 3 – [
– 0.051 0.063 0.375 0.650 0.137
12,7 – 3,2 – 20,0 6,3
20NR7.0TR 7 – [ [
0.500 – 0.126 – 0.787 0.248
12,7 – 3,2 – 20,0 6,3
20NR8.0TR 8 – [ [
0.500 – 0.126 – 0.787 0.248
– 2,0 2,5 12,7 22,0 4,71
22NR4.0TR 4 – [
– 0.079 0.098 0.500 0.866 0.185
– 2,0 2,3 12,7 22,0 4,71
22NR5.0TR 5 – [
– 0.079 0.091 0.500 0.866 0.185
15,875 – 5,0 – 26,0 7,88
Thread milling
26NR10.0TR 10 – [ [
0.625 – 0.197 – 1.024 0.310
15,875 – 5,0 – 26,0 7,88
26NR12.0TR 12 – [ [
0.625 – 0.197 – 1.024 0.310
15,875 – 5,1 – 26,0 7,88
26NR14.0TR 14 – [
0.625 – 0.201 – 1.024 0.310
15,875 – 5,0 – 26,0 7,88
26NR9.0TR 9 – [
0.625 – 0.197 – 1.024 0.310
– 2,5 3,2 15,875 27,0 6,15
27NR6.0TR 6 – [
– 0.098 0.126 0.625 1.063 0.242
Grades
Thread tapping
Insert Part No. Left Pitch W1 PDY PDX IC L S Coated Uncoated

mm TPI
– 0,9 0,8 9,525 16,5 3,47
16NL1.5TR 1,5 – [
– 0.035 0.031 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16NL2.0TR 2 – [
– 0.051 0.059 0.375 0.650 0.137
– 1,3 1,6 9,525 16,5 3,47
16NL3.0TR 3 – [
– 0.051 0.063 0.375 0.650 0.137
– 2,0 2,5 12,7 22,0 4,71
22NL4.0TR 4 – [
– 0.079 0.098 0.500 0.866 0.185
Annex
– 2,0 2,3 12,7 22,0 4,71

22NL5.0TR 5 – [
– 0.079 0.091 0.500 0.866 0.185
[ Stock standard.
161
www.secotools.com
Thread turning
Inserts
ACME – External Threading

Snap-Tap®
Thread turning
ANSI B1.5 - 1988

3G
16Ex/22Ex/27Ex 20ER/26ER
MDT
Grades

mm TPI
– – 5,0 – 26,0 7,88
26ER2ACME – 2 [ [
– – 0.197 – 1.024 0.310
– – 3,2 – 20,0 6,3
20ER3ACME – 3 [ [
Mini-Shaft™
– – 0.126 – 0.787 0.248

– – 3,2 – 20,0 6,3
20ER3.5ACME – 3.5 [
– – 0.126 – 0.787 0.248
– 2,5 3,0 15,875 27,0 6,15
27ER4ACME – 4 [
– 0.098 0.118 0.625 1.063 0.242
– 2,0 2,3 12,7 22,0 4,71
22ER5ACME – 5 [
– 0.079 0.091 0.500 0.866 0.185
– 2,0 2,5 12,7 22,0 4,71
22ER6ACME – 6 [
– 0.079 0.098 0.500 0.866 0.185
– 1,3 1,5 9,525 16,5 3,47
16ER8ACME – 8 [
– 0.051 0.059 0.375 0.650 0.137
Thread milling
– 1,4 1,5 9,525 16,5 3,47

16ER10ACME – 10 [
– 0.055 0.059 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16ER12ACME – 12 [
– 0.051 0.059 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16ER14ACME – 14 [
– 0.051 0.059 0.375 0.650 0.137
– 0,9 0,8 9,525 16,5 3,47
16ER16ACME – 16 [
– 0.035 0.031 0.375 0.650 0.137
Grades
Thread tapping

mm TPI
– 2,5 3,0 15,875 27,0 6,15
27EL4ACME – 4 [
– 0.098 0.118 0.625 1.063 0.242
– 2,0 2,3 12,7 22,0 4,71
22EL5ACME – 5 [
– 0.079 0.091 0.500 0.866 0.185
– 2,0 2,5 12,7 22,0 4,71
22EL6ACME – 6 [
– 0.079 0.098 0.500 0.866 0.185
– 1,3 1,5 9,525 16,5 3,47
16EL8ACME – 8 [
– 0.051 0.059 0.375 0.650 0.137
– 1,4 1,5 9,525 16,5 3,47
Annex
16EL10ACME – 10 [
– 0.055 0.059 0.375 0.650 0.137
[ Stock standard.
162
www.secotools.com
Thread turning
Inserts
ACME – Internal Threading

Snap-Tap®
Thread turning
ANSI B1.5 - 1988
3G
16NR/22Nx/27NR 20NR/26NR
MDT
Grades

mm TPI
– – 5,0 – 26,0 7,88
26NR2ACME – 2 [
– – 0.197 – 1.024 0.310
– – 3,2 – 20,0 6,3
20NR3ACME – 3 [ [
– – 0.126 – 0.787 0.248
Mini-Shaft™
– – 3,2 – 20,0 6,3
20NR3.5ACME – 3.5 [ [
– – 0.126 – 0.787 0.248
– 2,5 3,0 15,875 27,0 6,15
27NR4ACME – 4 [ [
– 0.098 0.118 0.625 1.063 0.242
– 2,0 2,3 12,7 22,0 4,71
22NR5ACME – 5 [
– 0.079 0.091 0.500 0.866 0.185
– 2,0 2,5 12,7 22,0 4,71
22NR6ACME – 6 [ [
– 0.079 0.098 0.500 0.866 0.185
– 1,3 1,5 9,525 16,5 3,47
16NR8ACME – 8 [
– 0.051 0.059 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
Thread milling
16NR10ACME – 10 [
– 0.051 0.059 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
16NR12ACME – 12 [
– 0.051 0.059 0.375 0.650 0.137
– 0,9 0,8 9,525 16,5 3,47
16NR16ACME – 16 [
– 0.035 0.031 0.375 0.650 0.137
Grades

mm TPI
Thread tapping
– 2,0 2,3 12,7 22,0 4,71
22NL5ACME – 5 [
– 0.079 0.091 0.500 0.866 0.185
[ Stock standard.
Annex
163
www.secotools.com
Thread turning
Inserts
Stub-ACME – External Threading

Snap-Tap®
Thread turning
ANSI B1.8 - 1988

2G
16ER 16ER/22Ex/27ER 20ER/26ER

MDT
Grades

mm TPI
– – 5,0 – 26,0 7,88
26ER2STACME – 2 [
– – 0.197 – 1.024 0.310
– – 3,2 – 20,0 6,3
20ER3STACME – 3 [
Mini-Shaft™
– – 0.126 – 0.787 0.248

– 2,6 2,8 15,875 27,0 6,15
27ER4STACME – 4 [ [
– 0.102 0.110 0.625 1.063 0.242
– 2,0 2,1 12,7 22,0 4,71
22ER5STACME – 5 [
– 0.079 0.083 0.500 0.866 0.185
– 2,4 2,5 12,7 22,0 4,71
22ER6STACME – 6 [
– 0.094 0.098 0.500 0.866 0.185
– 1,8 1,5 9,525 16,5 3,47
16ER8STACME – 8 [ [
– 0.071 0.059 0.375 0.650 0.137
– 1,5 1,5 9,525 16,5 3,47
16ER10STACME – 10 [
– 0.059 0.059 0.375 0.650 0.137
Thread milling
– 1,5 1,5 9,525 16,5 3,47

– 0.059 0.059 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
– 0.051 0.059 0.375 0.650 0.137
Grades

mm TPI
Thread tapping
– 2,4 2,5 12,7 22,0 4,71

22EL6STACME – 6 [
– 0.094 0.098 0.500 0.866 0.185
[ Stock standard.
Annex
164
www.secotools.com
Thread turning
Inserts
Stub-ACME – Internal Threading

Snap-Tap®
Thread turning
ANSI B1.8 - 1988
2G
16NR 16NR/22NR/27NR 20NR
MDT
Grades

mm TPI
– – 3,2 – 20,0 6,3
20NR3STACME – 3 [
– – 0.126 – 0.787 0.248
– 2,6 2,8 15,875 27,0 6,15
27NR4STACME – 4 [ [
– 0.102 0.110 0.625 1.063 0.242
Mini-Shaft™
– 2,0 2,1 12,7 22,0 4,71
22NR5STACME – 5 [
– 0.079 0.083 0.500 0.866 0.185
– 2,4 2,5 12,7 22,0 4,71
22NR6STACME – 6 [
– 0.094 0.098 0.500 0.866 0.185
– 1,8 1,5 9,525 16,5 3,47
16NR8STACME – 8 [ [
– 0.071 0.059 0.375 0.650 0.137
– 1,5 1,5 9,525 16,5 3,47
16NR10STACME – 10 [
– 0.059 0.059 0.375 0.650 0.137
– 1,5 1,5 9,525 16,5 3,47
– 0.059 0.059 0.375 0.650 0.137
– 1,3 1,5 9,525 16,5 3,47
Thread milling
– 0.051 0.059 0.375 0.650 0.137
[ Stock standard.
Thread tapping
Annex
165
www.secotools.com
Thread turning
Inserts
AMERICAN BUTTRESS – External Threading

Snap-Tap®
Thread turning
16ER
MDT
Grades
Insert Part No. Right Pitch PDY PDX IC L S Coated Uncoated
mm mm mm mm mm CP200 CP300 CP500 TTP2050 H15

mm TPI
Inch Inch Inch Inch Inch
2,0 1,3 9,525 16,5 3,47
16ER12BUT-S31217 – 12 [
0.079 0.051 0.375 0.650 0.137
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
166
www.secotools.com
Thread turning
Inserts
AMERICAN BUTTRESS – Internal Threading

Snap-Tap®
Thread turning
16NR
MDT
Grades
Insert Part No. Right Pitch PDY PDX IC L S Coated Uncoated

mm TPI
2,0 1,3 9,525 16,5 3,47
16NR12BUT-S31220 – 12 [
0.079 0.051 0.375 0.650 0.137
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
167
www.secotools.com
Thread turning
Inserts
API Rotary Drilling connection - External threading

Snap-Tap®
Thread turning
API Spec 7-2 2017
22ER/27ER
MDT
Grades
Insert Part No. Right Pitch RE PDY PDX IC L S APICODE TGTPF Coated Uncoated

mm TPI
0,965 1,95 2,55 12,7 22,0 4,71
22ER4API386 – 4 V038R 2 [ [
0.038 0.077 0.100 0.500 0.866 0.185
0,508 2,0 2,5 12,7 22,0 4,71
22ER5API404 – 5 V040 3 [ [
Mini-Shaft™
0.020 0.079 0.098 0.500 0.866 0.185

0,965 2,2 3,2 15,875 27,0 6,15
27ER4API384 – 4 V038R 3 [ [
0.038 0.087 0.126 0.625 1.063 0.242
0,965 2,2 3,2 15,875 27,0 6,15
27ER4API386 – 4 V038R 2 [ [ [
0.038 0.087 0.126 0.625 1.063 0.242
0,635 2,2 3,2 15,875 27,0 6,15
27ER4API504 – 4 V050 3 [ [ [
0.025 0.087 0.126 0.625 1.063 0.242
0,635 2,2 3,2 15,875 27,0 6,15
27ER4API506 – 4 V050 2 [ [ [
0.025 0.087 0.126 0.625 1.063 0.242
0,508 2,2 3,2 15,875 27,0 6,15
27ER5API404 – 5 V040 3 [ [
0.020 0.087 0.126 0.625 1.063 0.242
Thread milling
[ Stock standard.
Thread tapping
Annex
168
www.secotools.com
Thread turning
Inserts
API Rotary Drilling connection - Internal threading

Snap-Tap®
Thread turning
API Spec 7-2 2017
22NR/27NR
MDT
Grades

mm TPI
0,965 1,9 2,5 12,7 22,0 4,71
22NR4API386 – 4 V038R 2 [ [ [
0.038 0.075 0.098 0.500 0.866 0.185
0,508 2,0 2,5 12,7 22,0 4,71
22NR5API404 – 5 V040 3 [ [
0.020 0.079 0.098 0.500 0.866 0.185
Mini-Shaft™
0,965 2,2 3,2 15,875 27,0 6,15
27NR4API384 – 4 V038R 3 [ [
0.038 0.087 0.126 0.625 1.063 0.242
0,965 2,2 3,2 15,875 27,0 6,15
27NR4API386 – 4 V038R 2 [ [ [
0.038 0.087 0.126 0.625 1.063 0.242
0,635 2,2 3,2 15,875 27,0 6,15
27NR4API504 – 4 V050 3 [ [ [
0.025 0.087 0.126 0.625 1.063 0.242
0,635 2,2 3,2 15,875 27,0 6,15
27NR4API506 – 4 V050 2 [ [ [
0.025 0.087 0.126 0.625 1.063 0.242
0,508 2,2 3,2 15,875 27,0 6,15
27NR5API404 – 5 V040 3 [
0.020 0.087 0.126 0.625 1.063 0.242
[ Stock standard.
Thread milling
Thread tapping
Annex
169
www.secotools.com
Thread turning
Inserts
Rotary drill connection - External threading

Snap-Tap®
Thread turning
HEF = Hughes External Flush

904/906 = Hughes H90
H90 = Hughes Slimline H90
PAC = P.A.C.
904/906 HEF PAC

MDT
Grades

mm TPI
– 2,4 2,63 12,7 22,0 4,71
22ER4PAC – 4 V076 1,5 [
– 0.094 0.104 0.500 0.866 0.185
0,382 2,0 2,5 12,7 22,0 4,71
22ER6HEF – 6 – 2 [
Mini-Shaft™
0.015 0.079 0.098 0.500 0.866 0.185

– 2,7 3,5 15,875 27,0 6,15
27ER3.5H904 – 3.5 90V050 3 [
– 0.106 0.138 0.625 1.063 0.242
– 2,7 3,5 15,875 27,0 6,15
27ER3.5H906 – 3.5 90V050 2 [
– 0.106 0.138 0.625 1.063 0.242
– 3,5 3,6 15,875 27,0 6,15
27ER3H90 – 3 90V050 1,25 [
– 0.138 0.142 0.625 1.063 0.242
– 2,75 3,2 15,875 27,0 6,15
27ER4PAC – 4 V076 1,5 [
– 0.108 0.126 0.625 1.063 0.242
[ Stock standard.
Thread milling
Thread tapping
Annex
170
www.secotools.com
Thread turning
Inserts
Rotary drill connection - Internal threading

Snap-Tap®
Thread turning
HEF = Hughes External Flush
904/906 = Hughes H90
H90 = Hughes Slimline H90
PAC = P.A.C.
904/906 HEF PAC
MDT
Grades

mm TPI
– 2,4 2,6 12,7 22,0 4,71
22NR4PAC – 4 V076 1,5 [
– 0.094 0.102 0.500 0.866 0.185
0,381 2,0 2,5 12,7 22,0 4,71
22NR6HEF – 6 – 2 [
0.015 0.079 0.098 0.500 0.866 0.185
Mini-Shaft™
– 2,7 3,5 15,875 27,0 6,15
27NR3.5H904 – 3.5 90V050 3 [
– 0.106 0.138 0.625 1.063 0.242
– 2,7 3,5 15,875 27,0 6,15
27NR3.5H906 – 3.5 90V050 2 [
– 0.106 0.138 0.625 1.063 0.242
– 3,5 3,6 15,875 27,0 6,15
27NR3H90 – 3 90V050 1,25 [
– 0.138 0.142 0.625 1.063 0.242
– 2,75 3,2 15,875 27,0 6,15
27NR4PAC – 4 V076 1,5 [
– 0.108 0.126 0.625 1.063 0.242
[ Stock standard.
Thread milling
Thread tapping
Annex
171
www.secotools.com
Thread turning
Inserts
API Spec. 5B ROUND - External Threading

Snap-Tap®
Thread turning
API spec. 5B - 1988
16ER 22ER/27ER..M
MDT
Grades

mm TPI
0,38 1,5 1,5 9,525 16,5 3,47
16ER10APIRD – 10 [
0.015 0.059 0.059 0.375 0.650 0.137
0,46 1,5 1,5 9,525 16,5 3,47
16ER8APIRD – 8 [
Mini-Shaft™
0.018 0.059 0.059 0.375 0.650 0.137

0,38 2,4 3,7 12,7 22,0 4,71
22ER10APIRD2M – 10 [
0.015 0.094 0.146 0.500 0.866 0.185
0,46 2,9 4,5 15,875 27,0 6,15
27ER8APIRD2M – 8 [
0.018 0.114 0.177 0.625 1.063 0.242
[ Stock standard.
Thread milling
Thread tapping
Annex
172
www.secotools.com
Thread turning
Inserts
API Spec. 5B ROUND - Internal Threading

Snap-Tap®
Thread turning
API spec. 5B - 1988
16NR 27NR..M
MDT
Grades

mm TPI
0,38 1,5 1,5 9,525 16,5 3,47
16NR10APIRD – 10 [
0.015 0.059 0.059 0.375 0.650 0.137
0,46 1,5 1,5 9,525 16,5 3,47
16NR8APIRD – 8 [
0.018 0.059 0.059 0.375 0.650 0.137
Mini-Shaft™
0,46 2,9 4,5 15,875 27,0 6,15
27NR8APIRD2M – 8 [
0.018 0.114 0.177 0.625 1.063 0.242
[ Stock standard.
Thread milling
Thread tapping
Annex
173
www.secotools.com
Thread turning
Inserts
API 5B BUTTRESS, 1:16 Taper – External Threading

Snap-Tap®
Thread turning
Vallourec ST-D453.02
API spec. 5B - 1988
Crest and root are parallel to taper
22ER
MDT
Grades
Insert Part No. Right Pitch PDY PDX IC L S TGTPF Coated Uncoated

mm TPI
2,2 2,5 12,7 22,0 4,71
22ER5BUT2.5 – 5 3/4” [
0.087 0.098 0.500 0.866 0.185
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
174
www.secotools.com
Thread turning
Inserts
API 5B BUTTRESS, 1:16 Taper - Internal Threading

Snap-Tap®
Thread turning
Vallourec ST-D453.02
API spec. 5B - 1988
Crest and root are parallel to taper
22NR
MDT
Grades

mm TPI
2,0 2,1 12,7 22,0 4,71
22NR5BUT2.5 – 5 3/4” [ [
0.079 0.083 0.500 0.866 0.185
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
175
www.secotools.com
Thread turning
Inserts
API BUTTRESS 1:12 Taper - External Threading

Snap-Tap®
Thread turning
API spec. 5B - 1988

Crest and root are parallel to axis
22ER
MDT
Grades

mm TPI
2,2 2,5 12,7 22,0 4,71
22ER5BUT2.6 – 5 1 [
0.087 0.098 0.500 0.866 0.185
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
176
www.secotools.com
Thread turning
Inserts
API BUTTRESS 1:12 Taper - Internal Threading

Snap-Tap®
Thread turning
API spec. 5B - 1988
Crest and root are parallel to axis
22NR
MDT
Grades

mm TPI
2,0 2,1 12,7 22,0 4,71
22NR5BUT2.6 – 5 1 [
0.079 0.083 0.500 0.866 0.185
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
177
www.secotools.com
Thread turning
Inserts
Chasers
Thread turning
Type 1 Type 2 Type 3
Grades
Designation Pitch Thread Form Product INSL W1 PDX S NT Int./Ext. Type CHF1 Coated
MDT
mm mm mm mm CP250T CP500T TP150T TTP1550

TPI
Inch Inch Inch Inch
15,875 15,875 2,1 4,76
5-1102 5,0 API_BUTTRESS_5TPI_1/16_EXT 3 External 1 C-1004-4 [
0.625 0.625 0.083 0.187
15,875 15,875 2,5 4,76
5-1113 5,0 API_BUTTRESS_5TPI_1/16_INT, 3 Internal 3 C-1018-96 [
0.625 0.625 0.098 0.187
15,875 15,875 13,375 4,76
5-1134 5,0 API_BUTT_5TPI_CAS_1/16_INTPUL 3 Internal 2 C-1018-96 [ [
0.625 0.625 0.527 0.187
17,0 14,57 5,552 5,2
5-3105-1 5,0 API_BUTTRESS_5TPI_1/16_PMC_1 3 External 1 C-3901-1 [
0.669 0.574 0.219 0.205
Mini-Shaft™
17,0 14,825 3,858 5,2

0.669 0.584 0.152 0.205
17,0 14,98 2,165 5,2
0.669 0.590 0.085 0.205
20,0 15,692 4,84 4,76
5-4131-1 5,0 API_BUTTRESS_1/16_5TPI_EXT_1 3 External 1 C-4001-4 [
0.787 0.618 0.191 0.187
20,0 15,875 2,3 4,76
5-4131-2 5,0 API_BUTTRESS_1/16_5TPI_EXT_2 4 External 1 C-4001-4 [
0.787 0.625 0.091 0.187
25,0 15,875 2,0 5,0
5-5102 5,0 API_BUTTRESS_5TPI_1/16_EXT, 5 External 1 C-5003-4 [ [ [
0.984 0.625 0.079 0.197
25,0 15,875 2,5 5,0
Thread milling
5-5108 5,0 API_BUTTRESS_5TPI_1/16_INT 5 Internal 3 C-5003-96 [

0.984 0.625 0.098 0.197
25,0 15,875 22,5 5,0
5-5110 5,0 API_BUTT_5TPI_1/16_INTPULLING 5 Internal 2 C-5003-96 [
0.984 0.625 0.886 0.197
25,0 15,875 1,964 5,0
5-5112-C 5,0 API_BUTTRESS_5TPI_1/16_INT 5 Internal 3 C-5003-96 [ [
0.984 0.625 0.077 0.197
15,875 15,875 5,6 4,76
8-1116 8,0 API_RD_CAS_8TPI_EXT, 3 External 1 C-1005-4 [
0.625 0.625 0.220 0.187
15,875 15,875 5,6 4,76
8-1117 8,0 API_RD_TUBING_8TPI_EXT, 3 External 1 C-1005-4 [
0.625 0.625 0.220 0.187
15,875 15,875 2,5 4,76
8-1128 8,0 API_RD_8TPI_INT, 4 Internal 3 C-1002-96 [
0.625 0.625 0.098 0.187
Thread tapping
16,0 14,62 7,697 5,2

8-2115-1 8,0 API_RD_8TPI_CAS_3/4_TPF_PMC_1 3 External 1 – [
0.630 0.576 0.303 0.205
16,0 14,87 6,638 5,2
0.630 0.585 0.261 0.205
16,0 15,0 5,58 5,2
0.630 0.591 0.220 0.205
16,0 14,62 7,697 5,2
8-2118-1 8,0 API_RD_8TPI_TUB_3/4_TPF_PMC_1 3 External 1 – [
0.630 0.576 0.303 0.205
16,0 14,87 6,638 5,2
0.630 0.585 0.261 0.205
16,0 15,0 5,58 5,2
0.630 0.591 0.220 0.205
Annex
20,0 15,875 10,19 4,76

8-4133-1 8,0 API_RD_8TPI_EXT_CASING_1 3 External 1 C-4003-4 [
0.787 0.625 0.401 0.187
20,0 15,875 8,6 4,76
8-4133-2 8,0 API_RD_8TPI_EXT_CASING_2 3 External 1 C-4003-4 [
0.787 0.625 0.339 0.187
25,0 15,875 2,5 5,0
8-5111 8,0 API_RD_8TPI_INT 7 Internal 3 C-5002-96 [
0.984 0.625 0.098 0.197
178
www.secotools.com
Thread turning
Inserts
Grades
Designation Pitch Thread Form Product INSL W1 PDX S NT Int./Ext. Type CHF1 Coated
mm mm mm mm
Thread turning
TPI CP250T CP500T TP150T TTP1550
Inch Inch Inch Inch
25,0 15,875 22,5 5,0
8-5114 8,0 API_RD_8TPI_INTPULLING 7 Internal 2 C-5002-96 [
0.984 0.625 0.886 0.197
15,875 15,875 5,0 4,76
10-1120 10,0 API_RD_10TPI_TUB_INT 4 Internal 3 C-1001-96 [
0.625 0.625 0.197 0.187
15,875 15,875 4,4 4,76
10-1133-2 10,0 API_RD_10TPI_TUB_EXT_2 3 External 1 C-1001-4 [
0.625 0.625 0.173 0.187
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
179
www.secotools.com
Thread turning
Chipformers
Chipformers
Thread turning
Type 1 Type 2 Type 3 Type 4

MDT
Type 5 Type 6 Type 7
Designation Type INSL W1 S

mm mm mm
Inch Inch Inch
15,7 11,5 3,97
C-1001 1
0.618 0.453 0.156
15,7 11,5 3,97
C-1001-4 2
0.618 0.453 0.156
Mini-Shaft™
15,7 11,5 3,97

C-1001-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1002 1
0.618 0.453 0.156
15,7 11,5 3,97
C-1002-4 2
0.618 0.453 0.156
15,7 11,5 3,97
C-1002-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1003 1
0.618 0.453 0.156
Thread milling
15,7 11,5 3,97

C-1004 1
0.618 0.453 0.156
15,7 11,5 3,97
C-1004-4 2
0.618 0.453 0.156
15,7 11,5 3,97
C-1004-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1005-4 2
0.618 0.453 0.156
15,7 11,5 3,97
C-1005-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1006-4 2
Thread tapping
0.618 0.453 0.156

15,7 11,5 3,97
C-1009 1
0.618 0.453 0.156
15,7 11,5 3,97
C-1009-4 1
0.618 0.453 0.156
15,7 11,5 3,97
C-1009-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1010 1
0.618 0.453 0.156
15,7 11,5 3,97
C-1010-4 2
0.618 0.453 0.156
15,7 11,5 3,97
C-1010-96 3
0.618 0.453 0.156
Annex
15,7 11,5 3,97

C-1013-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1018 1
0.618 0.453 0.156
180
www.secotools.com
Thread turning
Chipformers

mm mm mm
Inch Inch Inch
Thread turning
15,7 11,5 3,97
C-1018-96 3
0.618 0.453 0.156
15,7 11,5 3,97
C-1021-96 3
0.618 0.453 0.156
15,7 11,5 3,18
C-1022 4
0.618 0.453 0.125
15,7 11,5 3,18
C-1023 5
0.618 0.453 0.125
15,7 11,5 3,97
C-1024 4
0.618 0.453 0.156
15,7 11,5 3,97
C-1025 5
0.618 0.453 0.156
MDT
15,7 11,5 3,18
C-1032 5
0.618 0.453 0.125
15,7 11,5 3,18
C-1033 4
0.618 0.453 0.125
15,7 11,5 3,18
C-1034 5
0.618 0.453 0.125
15,7 11,5 3,18
C-1035 4
0.618 0.453 0.125
15,7 12,5 3,97
C-1601-96 3
0.618 0.492 0.156
Mini-Shaft™
15,7 12,5 3,97
C-1604-4 2
0.618 0.492 0.156
15,7 14,5 3,18
C-1X37-I-145 4
0.618 0.571 0.125
15,7 14,5 3,18
C-1X38-I-145 5
0.618 0.571 0.125
15,7 14,5 3,18
C-1X39-I-145 4
0.618 0.571 0.125
15,7 14,5 3,18
C-1X40-I-145 5
0.618 0.571 0.125
15,7 14,5 3,18
Thread milling
C-1X41-I-145 4
0.618 0.571 0.125
15,7 14,5 3,18
C-1X42-I-145 5
0.618 0.571 0.125
16,9 13,9 4,47
C-3901-1 7
0.665 0.547 0.176
16,9 14,0 4,47
C-3901-2 7
0.665 0.551 0.176
16,9 14,2 4,47
C-3901-3 7
0.665 0.559 0.176
19,8 11,5 3,97
C-4001-4 2
0.780 0.453 0.156
Thread tapping
19,8 11,5 3,97

C-4003-4 2
0.780 0.453 0.156
24,8 11,5 3,97
C-5001-4 2
0.976 0.453 0.156
24,8 11,5 3,97
C-5001-96 3
0.976 0.453 0.156
24,8 11,5 3,97
C-5002-4 2
0.976 0.453 0.156
24,8 11,5 3,97
C-5002-96 3
0.976 0.453 0.156
24,8 11,5 3,97
C-5003 1
0.976 0.453 0.156
Annex
24,8 11,5 3,97

C-5003-4 2
0.976 0.453 0.156
24,8 11,5 3,97
C-5003-96 3
0.976 0.453 0.156
24,8 11,5 3,0
C-5005 1
0.976 0.453 0.118
181
www.secotools.com
Thread turning
Chipformers

mm mm mm
Inch Inch Inch
Thread turning
24,8 11,5 3,0

C-5006 1
0.976 0.453 0.118
24,8 13,0 3,0
C-5705-G 6
0.976 0.512 0.118
24,8 13,5 3,97
C-5803-4 6
0.976 0.531 0.156
24,8 13,5 3,0
C-5805-G 6
0.976 0.531 0.118
24,8 14,0 3,0
C-5905-G 6
0.976 0.551 0.118
12,6 11,5 3,18
C-9001-I 4
0.496 0.453 0.125
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
182
www.secotools.com
Thread MDT
Toolholders
Thread turning
MDT
Mini-Shaft™
Thread turning MDT
The highly stable and reliable Seco MDT (Multi-Directional Turning) system consists of holders and inserts that
offers excellent performance in thread-turning operations. Products are available for both external and internal
threads. Its unique clamping method is a combination of V-shaped top clamp and serrated contact surfaces
Thread milling
between the underside of the insert and toolholder, resulting in superb stability.
■ External and Internal threads.

■ Unique clamping method.
■ V-shaped top clamp secure stability.
Thread tapping
Annex
183
www.secotools.com
Thread MDT
Toolholders
MDT Toolholders, external

Toolholders for inserts LCGN
Thread turning
CFIR/L1212../1616 CFIR/L1212.. CFIR/L

MDT

• For inserts program, see page(s) 194-196
• ar = 3 x a p
• CW = indicative Cutting Width, may vary depending on the chosen insert
Designation Item number H B LF CW WF LH CDX Weight CTWS
CFIL1212M03 02435855 12,0 12,0 150,0 3,0 12,0 31,0 9,0 0,2 LC..1603..
Mini-Shaft™
CFIL1616H03 00091798 16,0 16,0 100,0 3,0 16,0 28,0 9,0 0,2 LC..1603..
CFIL2020K03 00068770 20,0 20,0 125,0 3,0 21,5 28,0 9,0 0,4 LC..1603..
CFIL2525M03 00068772 25,0 25,0 150,0 3,0 26,5 28,0 9,0 0,7 LC..1603..
CFIL3225P03 00013452 32,0 25,0 170,0 3,0 26,5 28,0 9,0 1,0 LC..1603..
CFIR1212M03 02435854 12,0 12,0 150,0 3,0 12,0 31,0 9,0 0,2 LC..1603..
CFIR1616H03 00091799 16,0 16,0 100,0 3,0 16,0 28,0 9,0 0,2 LC..1603..
CFIR2020K03 00068771 20,0 20,0 125,0 3,0 21,5 28,0 9,0 0,4 LC..1603..
CFIR2525M03 00068773 25,0 25,0 150,0 3,0 26,5 28,0 9,0 0,7 LC..1603..
CFIR3225P03 00013453 32,0 25,0 170,0 3,0 26,5 28,0 9,0 1,0 LC..1603..
Thread milling
For holders Clamp key Clamp screw
..1212M03 3SMS795 TCEI0409

..1616H03 4SMS795 TCEI0509
..2020K03 4SMS795 TCEI0513
Thread tapping
..2525M03 4SMS795 TCEI0513

..3225P03 4SMS795 TCEI0513
Annex
184
www.secotools.com
Thread MDT
Toolholders

Toolholders for inserts LCGF, LCGN, LCMF and LCMR
Thread turning
MDT
• DCINN3 - minimum bore diameter for internal application, see catalog Turning
CDX = 8 x CW • CDX – Max depth of cut for LCGF/LCMF16.. = 14 mm,
LCGF/LCMF30.. = 28
Designation Item number H B LF CW WF LH CDX DCINN3 Weight CTWS
Mini-Shaft™
CFSL2525M03 02703363 25,0 25,0 150,0 3,0 26,5 46,0 24,0 195,0 0,7 LC..1603..
CFSL3225P03 02703371 32,0 25,0 170,0 3,0 26,1 46,0 24,0 195,0 1,0 LC..1603..
CFSR2525M03 02703367 25,0 25,0 150,0 3,0 26,5 46,0 24,0 195,0 0,7 LC..1603..
CFSR3225P03 02703375 32,0 25,0 170,0 3,0 26,1 46,0 24,0 195,0 1,0 LC..1603..
Thread milling
CFSR/L..03 4SMS795 TCEI0513
Thread tapping
Annex
185
www.secotools.com
Thread MDT
Toolholders

Thread turning
MDT

• DCINN3 - minimum bore diameter for internal application, see catalog Turning
• CDX – Max depth of cut for LCGF/LCMF16.. = 14 mm CDX = 5 x CW
Designation Item number H B LF CW WF LH CDX DCINN3 Weight CTWS
CFML2020K03 00068776 20,0 20,0 125,0 3,0 21,5 36,0 15,0 – 0,4 LC..1603..
Mini-Shaft™
CFML2525M03 00068778 25,0 25,0 150,0 3,0 26,5 36,0 15,0 195,0 0,7 LC..1603..
CFML3225P03 00013459 32,0 25,0 170,0 3,0 26,5 36,0 15,0 195,0 1,0 LC..1603..
CFMR2020K03 00068777 20,0 20,0 125,0 3,0 21,5 36,0 15,0 – 0,4 LC..1603..
CFMR2525M03 00068779 25,0 25,0 150,0 3,0 26,5 36,0 15,0 195,0 0,7 LC..1603..
CFMR3225P03 00013460 32,0 25,0 170,0 3,0 26,5 36,0 15,0 195,0 1,0 LC..1603..

Thread milling
CFMR/L..-03 4SMS795 TCEI0513

Thread tapping
Annex
186
www.secotools.com
Thread MDT
Toolholders

Toolholders for inserts LCGN and LCMR
Thread turning
CF..1212, 1616 CF..2020, 2525
MDT
• CUTDIA – Due to the design, grooving depth is limited, see catalog Turning
Designation Item number H B LF WF LH CW CUTDIA Weight CTWS
CFOL1212M03 00053357 12,0 12,0 150,0 12,0 32,1 3,0 37,0 0,2 LC..1603..
Mini-Shaft™
CFOR1212M03 00053367 12,0 12,0 150,0 12,0 32,1 3,0 37,0 0,2 LC..1603..
CFTL1616M03 00054057 16,0 16,0 150,0 16,0 42,0 3,0 50,0 0,3 LC..1603..
CFTL2020K03 00054059 20,0 20,0 125,0 21,5 43,0 3,0 50,0 0,4 LC..1603..
CFTL2525M03 00054063 25,0 25,0 150,0 26,5 42,5 3,0 50,0 0,7 LC..1603..
CFTR1616M03 00054058 16,0 16,0 150,0 16,0 42,0 3,0 50,0 0,3 LC..1603..
CFTR2020K03 00054060 20,0 20,0 125,0 21,5 43,0 3,0 50,0 0,4 LC..1603..
CFTR2525M03 00054066 25,0 25,0 150,0 26,5 42,5 3,0 50,0 0,7 LC..1603..
Thread milling
CFOR/L..-03 3SMS795 TCEI0409

CFTR/L..-03 4SMS795 TCEI0513
Thread tapping
Annex
187
www.secotools.com
Thread MDT
Toolholders

Thread turning
MDT

• CDX – Max depth of cut for LCGF/LCMF16.. = 14 mm,
LCGF/LCMF30.. = 28 CFIR/L CDX = 3 x CW
• CP – Max coolant pressure (bar) using hose connection CFMR/L CDX = 5 x CW
Designation Item number H B LF WF LH CDX CW CP Weight CTWS
Mini-Shaft™
CFIL3225P03JET 02599874 32,0 25,0 170,0 26,5 33,0 9,0 3,0 275,0 1,0 LC..1603..
CFIR3225P03JET 02599873 32,0 25,0 170,0 26,5 33,0 9,0 3,0 275,0 1,0 LC..1603..
CFML3225P03JET 02702829 32,0 25,0 170,0 26,5 41,0 15,0 3,0 275,0 1,0 LC..1603..
CFMR3225P03JET 02702825 32,0 25,0 170,0 26,5 41,0 15,0 3,0 275,0 1,0 LC..1603..
For holders Clamp key Clamp screw Plug

Thread milling
CFIR/L..-03 4SMS795 TCEI0513 JET-P1/8-5MM

CFMR/L..-03 4SMS795 TCEI0513 JET-P1/8-5MM
Thread tapping
Annex
188
www.secotools.com
Thread MDT
Toolholders
MDT Toolholders, internal

Thread turning
MDT
Designation Item number H B LF CW WF LH CDX DCINN Weight CTWS
A32T-CGIL1603 02718385 30,0 31,0 300,0 3,0 24,0 60,0 9,0 32,0 1,6 LC..1603..
A32T-CGIR1603 02717661 30,0 31,0 300,0 3,0 24,0 60,0 9,0 32,0 1,6 LC..1603..
Mini-Shaft™
CG.R/L..03 T15P-7 L85011-T15P
Thread milling
Thread tapping
Annex
189
www.secotools.com
Thread MDT
Toolholders

Thread turning
MDT

• CDXSH – If toolholder enters bore more than LH CDX = 2 x CW
Designation Item number H B LF CW WF LH CDX DCINN CDXSH DMM Weight CTWS
mm mm mm mm mm mm mm mm mm mm kg
A40T-CGGL03 00093897 37,0 38,5 300,0 3,0 26,0 60,0 6,0 45,0 5,5 40,0 2,5 LC..1603..
Mini-Shaft™
A40T-CGGR03 00093896 37,0 38,5 300,0 3,0 26,0 60,0 6,0 45,0 5,5 40,0 2,5 LC..1603..
-..03 3SMS795 MC6S4X14

Thread milling
Thread tapping
Annex
190
www.secotools.com
Thread MDT
Toolholders

Thread turning
MDT
Designation Item number B H LF LH WF LU DCINN CW CDX Weight CTWS
Inch Inch Inch Inch Inch Inch Inch Inch Inch lbs
A20-CGIL03 02718392 1.211 1.171 12.000 2.362 0.929 1.969 1.260 0.118 0.354 3.530 LC..1603..
A20-CGIR03 02717401 1.211 1.171 12.000 2.362 0.929 1.969 1.260 0.118 0.354 3.530 LC..1603..
Mini-Shaft™
..03 T15P-7 L85011-T15P
Thread milling
Thread tapping
Annex
191
www.secotools.com
Thread MDT
Toolholders
MDT Blades modular

Blades for inserts LCGF, LCGN, LCMF and LCMR
Thread turning
MDT

• CDX – Max depth of cut for LCGF/LCMF13.. = 11 mm
LCGF/LCMF16.. = 14 mm
Designation Item number LF WF CW CDX Weight CTWS
mm mm mm mm kg
V21-CML1603 02719038 16,2 9,2 3,0 15,0 0,1 LC..1603..

Mini-Shaft™
V21-CMR1603 00030310 16,2 9,2 3,0 15,0 0,1 LC..1603..

Thread milling
Thread tapping
Annex
192
www.secotools.com
Thread MDT
Inserts
MDT Inserts LCGN – Partial profile 55°
Thread turning
Tolerances:
LIG = ±0,025
RE = ±0,025
Helix angle not to exceed l +2°
Grades
Designation Pitch RE LIG S Coated Uncoated

mm mm mm CP200 CP300 CP500 TTP2050 H15
mm TPI
Inch Inch Inch
MDT
0,08 16,6 4,5
LCGN1603-A55 0,5-1,5 48-16 [
0.003 0.654 0.177
0,18 16,6 4,5
LCGN1603-G55 1,75-3 14-8 [
0.007 0.654 0.177
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
193
www.secotools.com
Thread MDT
Inserts
MDT Inserts LCGN – Partial profile 60°

Thread turning
Tolerances:
LIG = ±0,025
RE = ±0,025
Grades
Designation Pitch RE LIG S Coated Uncoated

mm mm mm CP200 CP300 CP500 TTP2050 H15
mm TPI
Inch Inch Inch
MDT
0,08 16,6 4,5

LCGN1603-A60 0,5-1,5 48-16 [
0.003 0.654 0.177
0,18 16,6 4,5
LCGN1603-G60 1,75-3 14-8 [
0.007 0.654 0.177
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
194
www.secotools.com
Thread MDT
Inserts
MDT Inserts – LCGN – ISO Metric
Thread turning
Tolerances:
LIG = ±0,025
Grades
Designation Note Pitch RE LIG S CW CDXI Coated Uncoated

mm TPI
MDT
0,07 16,6 4,5 0,75 1,9
LCGN1603-E0.5ISO * 0,5 – [
0.003 0.654 0.177 0.030 0.075
0,11 16,6 4,5 1,2 3,0
LCGN1603-E0.8ISO * 0,8 – [
0.004 0.654 0.177 0.047 0.118
0,13 16,6 4,5 1,5 3,75
LCGN1603-E1.0ISO * 1,0 – [
0.005 0.654 0.177 0.059 0.148
0,17 16,6 4,5 1,88 4,2
LCGN1603-E1.25ISO * 1,25 – [
0.007 0.654 0.177 0.074 0.165
0,21 16,6 4,5 2,4 0,92
LCGN1603-E1.5ISO – 1,5 – [
0.008 0.654 0.177 0.094 0.036
Mini-Shaft™
*Toolholders have to be modified
[ Stock standard.
Thread milling
Thread tapping
Annex
195
www.secotools.com
Toolholders
Thread turning
MDT
Mini-Shaft™
Thread turning Mini-Shaft™

The highly versatile Mini-Shaft™ consists of inserts and holders providing stable, high-precision internal threading
operations. Mini-Shaft™ features a special double-serrated joint that creates a secure connection point for its
exchangeable inserts and toolholders, resulting in a repeatability of +/- 0.02 mm ( +/- .0008 inch).
Thread milling
■ All toolholders can accommodate R- and L-handed inserts.

■ Through coolant possibility.
■ Use in holes as small as 8 mm (0.315 inch).
Thread tapping
Annex
196
www.secotools.com
Toolholders
Mini-Shaft™ Holders
Toolholders for inserts LCEX
Thread turning
A..-SGXN A..-SGXN-R
MDT
Designation Item number H B OAL WF LH DMM DCINN Weight CTWS
A12G-SGXN08-20 02411140 11 12 86,5 4,8 16,5 12,0 8,0 0,1 LCEX08..

A12G-SGXN08-20-R 02511871 – – 86,5 4,8 16,5 12,0 8,0 0,1 LCEX08..
Mini-Shaft™
A16H-SGXN11-25 02411142 15 16 96,0 6,7 21,0 16,0 11,0 0,2 LCEX11..
A16H-SGXN11-25-R 02511872 – – 96,0 6,7 21,0 16,0 11,0 0,2 LCEX11..
Thread milling
A12G-.. T08P-2 C02506-T08P
A16H-.. T10P-2 C03509-T10P
Thread tapping
Annex
197
www.secotools.com
Toolholders
Mini-Shaft™ Holders
Thread turning
E...-SGXN E...-SGXN-R
MDT

Designation Item number H B OAL WF DMM DCINN Weight CTWS
E06G-SGXN08 02411141 6 6 86,5 4,8 6,0 8,0 0,1 LCEX08..

E06G-SGXN08-R 02513692 – – 86,5 4,8 6,0 8,0 0,1 LCEX08..
Mini-Shaft™
E08H-SGXN11 02411143 7 8 96,0 6,7 8,0 11,0 0,1 LCEX11..

E08H-SGXN11-R 02513696 – – 96,0 6,7 8,0 11,0 0,1 LCEX11..

Thread milling
E06G-.. T08P-2 C02506-T08P

E08H-.. T10P-2 C03509-T10P
Thread tapping
Annex
198
www.secotools.com
Toolholders
SGXN Mini-Shaft™ Holders

Thread turning
A..-SGXN A..-SGXN-R E..-SGXN E..-SGXN-R
MDT
Designation Item number B H OAL LH WF DCINN DMM Weight CTWS
Inch Inch Inch Inch Inch Inch Inch lbs
A10G-SGXN08-078 02450441 0.605 0.586 3.406 0.650 0.188 0.315 0.625 0.220 LCEX08..
A10G-SGXN08-078-R 02511873 – – 3.406 0.650 0.188 0.315 0.625 0.220 LCEX08..
Mini-Shaft™
A10H-SGXN11-098 02450443 0.605 0.586 3.780 0.827 0.264 0.433 0.625 0.440 LCEX11..
A10H-SGXN11-098-R 02511874 – – 3.780 0.827 0.264 0.433 0.625 0.440 LCEX11..
E04G-SGXN08 02450442 0.233 0.217 3.406 – 0.189 0.315 0.250 0.220 LCEX08..
E04G-SGXN08-R 02513700 – – 3.406 – 0.189 0.315 0.250 0.220 LCEX08..
E05H-SGXN11 02450445 0.300 0.287 3.780 – 0.264 0.433 0.312 0.220 LCEX11..
E05H-SGXN11-R 02513704 – – 3.780 – 0.264 0.433 0.312 0.220 LCEX11..
Thread milling
A10G-../E04G-.. T08P-2 C02506-T08P

A10H-../E05H-.. T10P-2 C03509-T10P
Thread tapping
Annex
199
www.secotools.com
Inserts
Mini-Shaft™ Inserts
Partial profile 60°
Thread turning
..L ..R
MDT
Grades
Designation Pitch RE PDX WF INSL LF Coated Uncoated

mm TPI
0,03 0,48 4,78 7,78 3,3
LCEX0804-A60L 0,5-0,75 48-36 [
0.001 0.019 0.188 0.306 0.130
0,03 0,48 4,78 7,78 3,3
LCEX0804-A60R 0,5-0,75 48-36 [
0.001 0.019 0.188 0.306 0.130
Mini-Shaft™
0,03 0,48 6,7 10,7 4,0

LCEX1105-A60L 0,5-0,75 48-36 [
0.001 0.019 0.264 0.421 0.157
0,03 0,48 6,7 10,7 4,0
LCEX1105-A60R 0,5-0,75 48-36 [
0.001 0.019 0.264 0.421 0.157
0,07 0,73 4,78 7,78 3,3
LCEX0804-AG60L 0,75-1,25 36-20 [
0.003 0.029 0.188 0.306 0.130
0,07 0,73 4,78 7,78 3,3
LCEX0804-AG60R 0,75-1,25 36-20 [
0.003 0.029 0.188 0.306 0.130
0,07 0,73 6,7 10,7 4,0
LCEX1105-AG60L 0,75-1,25 36-20 [
0.003 0.029 0.264 0.421 0.157
0,07 0,73 6,7 10,7 4,0
Thread milling
LCEX1105-AG60R 0,75-1,25 36-20 [

0.003 0.029 0.264 0.421 0.157
0,12 0,98 4,78 7,78 3,3
LCEX0804-G60L 1,25-1,75 20-16 [
0.005 0.039 0.188 0.306 0.130
0,12 0,98 4,78 7,78 3,3
LCEX0804-G60R 1,25-1,75 20-16 [
0.005 0.039 0.188 0.306 0.130
0,12 0,98 6,7 10,7 4,0
LCEX1105-G60L 1,25-1,75 20-16 [
0.005 0.039 0.264 0.421 0.157
0,12 0,98 6,7 10,7 4,0
LCEX1105-G60R 1,25-1,75 16-20 [
0.005 0.039 0.264 0.421 0.157
[ Stock standard.
Thread tapping
Annex
200
www.secotools.com
Inserts
ISO Metric
Thread turning
..L ..R
MDT
Grades

mm TPI
0,07 0,6 6,7 10,7 4,0
LCEX1105-1.0ISOL 1 – [
0.003 0.024 0.264 0.421 0.157
0,07 0,6 6,7 10,7 4,0
LCEX1105-1.0ISOR 1 – [
0.003 0.024 0.264 0.421 0.157
0,12 0,8 6,7 10,7 4,0
Mini-Shaft™
LCEX1105-1.5ISOL 1,5 – [
0.005 0.031 0.264 0.421 0.157
0,12 0,85 6,7 10,7 4,0
LCEX1105-1.5ISOR 1,5 – [
0.005 0.033 0.264 0.421 0.157
0,17 1,1 6,7 10,7 4,0
LCEX1105-2.0ISOL 2 – [
0.007 0.043 0.264 0.421 0.157
0,17 1,1 6,7 10,7 4,0
LCEX1105-2.0ISOR 2 – [
0.007 0.043 0.264 0.421 0.157
0,18 1,35 6,7 10,7 4,0
LCEX1105-2.5ISOL 2,5 – [
0.007 0.053 0.264 0.421 0.157
0,18 1,35 6,7 10,7 4,0
LCEX1105-2.5ISOR 2,5 – [
0.007 0.053 0.264 0.421 0.157
Thread milling
0,21 1,6 6,7 10,7 4,0
LCEX1105-3.0ISOL 3 – [
0.008 0.063 0.264 0.421 0.157
0,21 1,6 6,7 10,7 4,0
LCEX1105-3.0ISOR 3 – [
0.008 0.063 0.264 0.421 0.157
[ Stock standard.
Thread tapping
Annex
201
www.secotools.com
Inserts
Whitworth, BSW
Thread turning
..L ..R
MDT
Grades

mm TPI
0,24 1,0 6,7 10,7 4,0
LCEX1105-14WL – 14 [
0.009 0.039 0.264 0.421 0.157
0,24 1,0 6,7 10,7 4,0
LCEX1105-14WR – 14 [
0.009 0.039 0.264 0.421 0.157
Mini-Shaft™
0,15 0,77 6,7 10,7 4,0

LCEX1105-19WL – 19 [
0.006 0.030 0.264 0.421 0.157
0,15 0,77 6,7 10,7 4,0
LCEX1105-19WR – 19 [
0.006 0.030 0.264 0.421 0.157
[ Stock standard.
Thread milling
Thread tapping
Annex
202
www.secotools.com
Inserts
TR-DIN103
Thread turning
..RL ..RR
MDT
Grades

mm TPI
0,1 0,8 6,7 10,7 4,0
LCEX1105-1.5TRL 1,5 – [
0.004 0.031 0.264 0.421 0.157
0,1 0,8 6,7 10,7 4,0
LCEX1105-1.5TRR 1,5 – [
0.004 0.031 0.264 0.421 0.157
0,15 1,1 6,7 10,7 4,0
Mini-Shaft™
LCEX1105-2.0TRL 2 – [
0.006 0.043 0.264 0.421 0.157
0,15 1,1 6,7 10,7 4,0
LCEX1105-2.0TRR 2 – [
0.006 0.043 0.264 0.421 0.157
0,15 1,6 6,7 10,7 4,0
LCEX1105-3.0TRL 3 – [
0.006 0.063 0.264 0.421 0.157
0,15 1,6 6,7 10,7 4,0
LCEX1105-3.0TRR 3 – [
0.006 0.063 0.264 0.421 0.157
[ Stock standard.
Thread milling
Thread tapping
Annex
203
www.secotools.com
Inserts
UN
Thread turning
..L ..R
MDT
Grades

mm TPI
0,13 0,9 4,78 7,78 3,3
LCEX0804-16UNL – 16 [
0.005 0.035 0.188 0.306 0.130
0,13 0,9 4,78 7,78 3,3
LCEX0804-16UNR – 16 [
0.005 0.035 0.188 0.306 0.130
Mini-Shaft™
0,09 0,7 4,78 7,78 3,3

LCEX0804-20UNL – 20 [
0.004 0.028 0.188 0.306 0.130
0,09 0,7 4,78 7,78 3,3
LCEX0804-20UNR – 20 [
0.004 0.028 0.188 0.306 0.130
0,07 0,6 4,78 7,78 3,3
LCEX0804-24UNL – 24 [
0.003 0.024 0.188 0.306 0.130
0,07 0,6 4,78 7,78 3,3
LCEX0804-24UNR – 24 [
0.003 0.024 0.188 0.306 0.130
0,04 0,5 4,78 7,78 3,3
LCEX0804-32UNL – 32 [
0.002 0.020 0.188 0.306 0.130
0,04 0,5 4,78 7,78 3,3
Thread milling
LCEX0804-32UNR – 32 [
0.002 0.020 0.188 0.306 0.130
[ Stock standard.
Thread tapping
Annex
204
www.secotools.com
Inserts
NPT
Thread turning
..R
MDT
Grades

mm TPI
0,03 0,57 4,78 7,78 3,3
LCEX0804-27NPTR – 27 [
0.001 0.022 0.188 0.306 0.130
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
205
www.secotools.com
Inserts
NPTF
Thread turning
..L ..R
MDT
Grades

mm TPI
0,04 0,57 4,78 7,78 3,3
LCEX0804-27NPTFL – 27 [
0.002 0.022 0.188 0.306 0.130
0,04 0,57 4,78 7,78 3,3
LCEX0804-27NPTFR – 27 [
0.002 0.022 0.188 0.306 0.130
Mini-Shaft™
[ Stock standard.
Thread milling
Thread tapping
Annex
206
www.secotools.com
Thread milling and taps
Range overview
Threading ∅ Range Length
Thread turning
Threadmaster™
M1-M20 ~ 1,5-2 x D
MDT
217, 218-221
R396.18/19/20
Mini-Shaft™
14 ≤ ~ 2 - 3.5 x D
231-236
Thread milling
R335.14
12< ~1xD<
Thread tapping
243-245
Threadmaster™ Taps
M1-M64 ~ 1,5–3,5 x D
Annex
260-475
207
www.secotools.com
Thread milling and taps
Versatile & Specific

Thread milling and Tapping – Choice of tool
Thread turning
Continuous research and development of better materials, coatings and Our product strategy is to provide the market with versatile first choice tools
optimal geometries help fulfil customer’s requirements. and specific optimized solutions for threading.
Product Strategy Product Assortment
Specific
MDT
Versatile
Performance
Performance
5
Mini-Shaft™
Material / Application Material / Application

Thread milling
Performance
Thread tapping
Material / Application
Annex
208
www.secotools.com
Thread milling
Thread milling – Choice of cutter, inserts and cutting data

Solid carbide cutter – Threadmaster™
1. General
Thread turning
The same cutter can be used for machining both right and left hand threads. Metric and UN versions are only for internal threading. The remaining of the range can be used for both
external and internal threading.
• The cutters are regrindable
2. Select cutter diameter
• Look up the pages with the Threadmaster programmes
• Look up the column for the required thread type
• Look up the required pitch
• When more alternatives are available note that:
- Smaller cutter diameter allows smaller threading diameter (minimum thread diameter is found in the designation).
- Larger cutter diameter allows larger threading depth (maximum threading depth is 2 x cutter diameter, Dc).
3. Selection of cutter
MDT
• TM: Basic choice
• TM...-900: Choice for steel and stainless steel with tensile strength > 900 N/mm2
• TM...-H: Choice for hardened steel with hardness 45-60 HRC
• DTM: Drill, thread and chamfer with same tool. To be used in aluminium and cast iron
4. Select cutting data
• Use the tables beginning on page 479 to classify the workpiece material into a SMG (Seco Material Group)
• Cutting speed recommendations are found on the cutting data page for Threadmaster
• Feed per tooth (= flute) recommendations are found on the cutting data page for Threadmaster
• Formulae for cutting data calculation are on page 212
• For best suggestion and performance use Seco Suggest https://www.secotools.com/dashboard/Suggest/Suggest.
Mini-Shaft™
5. Machining methods
• Helical interpolation must be used to create the pitch
• Clockwise or counterclockwise feed direction can be used depending on thread type and machining method (right or left hand), external or internal thread
• Climb milling is recommended
• Coolant supply is recommended. Except when threading hardened material
• Special machining recommendations for certain workpiece materials are found on the cutting data page for Threadmaster
Feed recommendations
Threadmaster™
Thread milling
• Feed recommendations for TM-M4X0.7ISO-6R1 except for TM-Mini, that recommendation is for TM-M1.0X0.25ISO-3R1-H and only a start value
• For best suggestion and performance use Seco Suggest https://www.secotools.com/dashboard/Suggest/Suggest
• All feed are related to the centre of the cutter and not the periphery
• In the entrance loop reduce feed by 50%. In the exit loop increase feed by 50%
• In the entrance and exit loop feed the cutter 15% of the pitch axially
• For free cutting steel, low alloy and ferritic steel, quench & temper steel, low to medium alloy stainless steels and austenitic cast irons, leave 0,05 mm in ae for a finishing cut
• For high strength steels, martensitic and high alloy stainless steels, Ni-based superalloys and titanium alloys remove 2/3 of ae in the first cut and the remaining 1/3 in the
second cut
• For hardened steels remove 1/3 of ae in the first cut, 1/3 of ae in the second cut and the remaining 1/3 in the third cut
• For NPT and NPTF threads take the whole ae in one cut
• Coolant is recommended (except when using -H in hardened materials)
• The Metric and UN thread mills are only for internal threads
Thread tapping
TM-Mini:
• Left-hand cutting (M4)
• Do the entrance loop before entering into the workpiece
DTM:
• Use peck drilling
Annex
209
www.secotools.com
Thread milling
Choice of cutter, inserts and cutting data

1. General
Internal
Thread turning
• The same cutter can be used for machining external and internal, right-
hand and left-hand threads
2. Select cutter diameter
• Look up the pages for thread milling cutters and choose a suitable diam-
eter in the tool data table
• The insert size varies with the cutter diameters. Check the available insert
programme for the different sizes before deciding cutter diameter Di = Do - 2h
• For internal thread milling check the ‘minimum thread diameter’ table
before deciding cutter diameter. This table shows the relation between the Thread
cutter diameter and the smallest thread diameter to be machined
ISO 0,60 x p
3. Select insert
UN 0,60 x p
• Look up the thread milling inserts pages and choose the required thread
W 0,69 x p
MDT
type in the correct insert size for the cutter. Choose the grade F30M/
CP500 for general machining BSPT 0,69 x p
4. Select cutting data NPT 0,78 x p
Radial cutting depth

• Use the formulae to calculate the radial cutting depth (ae). (See figures) p = pitch (mm)
Radial infeed value ae:
h = depth of thread
Feed rate
• Divide the radial cutting depth with the cutter diameter to get the actual Dc = Cutter dia
cutter engagement percentage (ae/Dc%). Use the cutting data table to get Do = Major dia
Di = Minor dia
a feed per tooth recommendation, see page(s) 222 - 227.
Mini-Shaft™
Cutting speed
External
• Use the tables beginning at page 479 to classify the workpiece material
into a Seco Material Group.
• Cutting speed recommendations (for 10% engagement) are in the basic
cutting speed table in the catalogue
• For safety reasons, maximum rpm that should never be exceeded
Di = Do - 2h
• Formulae for cutting data calculation are found on page 212
5. Machining methods
Thread
• Helical interpolation must be used to create the pitch
• Clockwise or counterclockwise feed direction can be used depending on ISO 0,65 x p
thread type and machining method (right or left hand, external or internal UN 0,65 x p
Thread milling
thread)
W 0,69 x p
• Climb milling and coolant is recommended. Coolant supply is recom-
mended except when threading hardened material BSPT 0,69 x p
NPT 0,78 x p
p = pitch (mm)
Radial infeed value ae: h = depth of thread
Dc = Cutter dia
Do = Major dia
Di = Minor dia
Thread tapping
Annex
210
www.secotools.com
Thread milling
Choice of cutter, inserts and cutting data

RPM RPM
Thread turning
3.82
(rev/min) (rev/min)
Cutting speed Cutting speed
(m/min) (sf/min)
3.82
Feed speed Feed speed
zn . f z zn . f z
MDT
f f
(mm/min) (in/min)
f
zc . f z f
zc . f z
(mm/min) (in/min)
Feed per revolution Feed per revolution
f zn fz f zn fz
Mini-Shaft™
(mm/rev) (in/rev)
f zc fz f zc fz
(mm/rev) (in/rev)
Dc = Cutter diameter (mm) Dc = Cutter diameter (inch)

f = Feed per revolution (mm) f = Feed per revolution (inch)
Thread milling
fz = Feed per tooth (mm/tooth) fz = Feed per tooth (in/tooth)
zc = Effective No. of teeth for calculation of feed speed or feed per rev zc = Effective No. of teeth for calculation of feed speed or feed per rev
n = RPM (rev/min) n = RPM (rev/min)

vc = Cutting speed (m/min) vc = Cutting speed (sf/min)
vf = Feed speed (mm/min) vf = Feed speed (sf/min)
zn = No. of teeth zn = No. of teeth
Thread tapping
Annex
211
www.secotools.com
Thread milling
Disc Milling cutter 335.14

Thread turning
Disc milling cutter with exchangeable carbide head from diameter 9,7 mm (0.382”)
A broad range of heads and shanks available for all your disc milling operation by circular interpo-
lation or linear slotting.
MDT
Strong, reliable and precise connection between the head and the cutter body.
Mini-Shaft™
Thread milling
Cover all type of material with universal M geometry and F32M grade.
Thread tapping
Threading:
Head from dia 11,7 to 27,7 mm (0.461 to 1.091”) for partial metric threads with pitch 1-6 mm
(0.039-0.236”) and full profile whitworth threads with pitch 19 to 11 tpi and UN threads with pitch
24 to 6 tpi.
Annex
212
www.secotools.com
Thread milling
Deviation from standard thread profile
Thread turning
TPN TPX
Actual Thread Standard thread form
MDT
Thread milling by circular interpolation can cause thread profile violation when using insert designed for partial thread. Keep this in mind while selecting a tool. The tool diameter
needs to be small enough compared to the hole diameter. The pitch also needs to be considered.
Insert with partial profile for Metric ISO-Threads are multi tools. That means that each insert could machine different pitches. The insert is designed to meet the minimum pitch size
(TPN); Machining this pitch will result in a thread form that conforms to the standard.
The recommended maximum pitch size (TPX) can also be machined with this insert at the expense of standard conformity: The result will be a slightly deeper thread than the
standard. The deeper thread is normally accepted, but the application and use needs to be evaluated.
Following table is a recommendation over maximum tool diameter in relation to the thread size and pitch:
Mini-Shaft™
ISO-Thread, partial profile
Pitch M12 M16 M20 M24 M27 M30 M36 M42 M48 M56 M60
1 10 14 18 22 25 28 34 40 45 53 57
1,5 8 12 16 20 24 26 32 37 43 51 55
2 7 10 14 18 22 24 30 35 40 48 52
2,5 6 8 12 16 20 22 28 32 37 45 48
Thread milling
3 6 10 14 18 20 26 30 36 43 47
3,5 12 16 18 24 29 35 42 46
4 22 27 32 39 43
4,5 24 30 37 40
5 22 27 34 37
5,5 20 25 31 35
6 19 23 29 32
Code key Threading insert Thread tapping
Right hand System Internal thread Pitch size (2,50-5,00 No. of teeth
(E = external, mm or ex. only a fixed
X = internal/external) pitch 2,5 mm, 16 tpi...)
R 335 . 14 217 M N P 250500 - 12 Z3

Annex
Disc Milling code Head diameter Thread type Partial profile (F = full profile) Connection size
example: 21.7 mm (W and UN)
213
www.secotools.com
Thread milling
Application overview milling cutters

Solid carbide
Thread turning
Threadmaster™
MDT
TM - Thread size M1-M20

Solid carbide thread milling cutters
217, 218-221
Cutter with inserts

Mini-Shaft™
396.18 396.19 396.20

Thread milling
Ø 12 mm (0.472”) Ø 17-58 mm (0.669-2.283”) Ø 63 mm (2.480”)

Thread milling cutters with indexable insert Thread milling cutters with indexable inserts Thread milling cutters with indexable inserts
231-232 231-234 236

Thread tapping
Cutter with changeable head

335.14
Annex
Ø 11,7-27,7 mm (0.461-1.091”)
Thread milling cutters with changeable head
243
214
www.secotools.com
Thread milling
Threadmaster™ Solid thread mills
Thread turning
MDT
Mini-Shaft™
Threadmaster™
Threadmaster™ thread mills provide high thread quality at low cost per hole. Machining up to 100 percent depth,
Threadmasters have high helix angles that reduce cutting forces and eliminate chatter. They feature an excellent
carbide substrate and TiCN-coating (TM and TM-900) or TiAlN-coating (TM-H and DTM) for high toughness and
Thread milling
wear resistance milling aluminum, steel, stainless steel and cast iron.
Drilling Threadmaster is a multi-tool producing a thread by drilling and chamfering in a single pass for high thread
quality at a low cost per hole.
■ Some versions with through-coolant holes.

■ Threads range from M4 to M20.
■ Mini thread mills for thread sizes from M1 - M2.5.
Thread tapping
Annex
215
www.secotools.com
Thread milling
Threadmaster™
Thread turning
Thread profile
* = Metric coarse, for Internal Threading
** = Metric fine, for Internal Threading
*** = UNC, for Internal Threading
MDT
• For cutting data see page(s) 222

• TM; 2 x D
• Chamfer angle STA = 45°
Thread Through
Designation Item number TDZ Pitch profile DC DMM OAL APMXS NOF coolant
mm mm mm mm
TPX TPIX
Inch Inch Inch Inch
7,8 10,0 74,0 20,3
TM-M10X1.5ISO-10R1 02827404 M10 1,5 – * 3 ✔
0.307 0.394 2.913 0.799
Mini-Shaft™
7,8 10,0 74,0 20,3

TM-M10X1.5ISO-10R1-900 02827362 M10 1,5 – * 3 ✔
0.307 0.394 2.913 0.799
7,8 10,0 66,0 15,0
TM-M10X1.5ISO-10R1-H 02827353 M10 1,5 – * 5 –
0.307 0.394 2.598 0.591
9,4 12,0 79,0 25,4
TM-M12X1.75ISO-12R1 02827403 M12 1,75 – * 3 ✔
0.370 0.472 3.110 1.000
9,4 12,0 79,0 25,4
TM-M12X1.75ISO-12R1-900 02827363 M12 1,75 – * 3 ✔
0.370 0.472 3.110 1.000
9,4 12,0 76,0 17,5
TM-M12X1.75ISO-12R1-H 02827354 M12 1,75 – * 5 –
0.370 0.472 2.992 0.689
10,9 14,0 89,0 29,0
TM-M14X2.0ISO-14R1 02827402 M14 2,0 – * 4 ✔
Thread milling
0.429 0.551 3.504 1.142

10,9 14,0 89,0 29,0
TM-M14X2.0ISO-14R1-900 02827364 M14 2,0 – * 4 ✔
0.429 0.551 3.504 1.142
15,83 20,0 108,0 40,0
TM-M20X2.5ISO-20R1 02827348 M20 2,5 – * 4 ✔
0.623 0.787 4.252 1.575
3,15 6,0 49,0 8,0
TM-M4X0.7ISO-6R1 02827408 M4 0,7 – * 3 –
0.124 0.236 1.929 0.315
3,15 6,0 49,0 8,0
TM-M4X0.7ISO-6R1-900 02827358 M4 0,7 – * 3 –
0.124 0.236 1.929 0.315
3,15 6,0 46,0 6,3
TM-M4X0.7ISO-6R1-H 02827349 M4 0,7 – * 4 –
0.124 0.236 1.811 0.248
Thread tapping
3,95 6,0 49,0 10,0

TM-M5X0.8ISO-6R1 02827407 M5 0,8 – * 3 –
0.156 0.236 1.929 0.394
3,95 6,0 49,0 10,0
TM-M5X0.8ISO-6R1-900 02827359 M5 0,8 – * 3 –
0.156 0.236 1.929 0.394
3,95 6,0 47,0 7,2
TM-M5X0.8ISO-6R1-H 02827350 M5 0,8 – * 4 –
0.156 0.236 1.850 0.283
4,7 6,0 55,0 12,5
TM-M6X1.0ISO-6R1 02827406 M6 1,0 – * 3 –
0.185 0.236 2.165 0.492
4,7 6,0 55,0 12,5
TM-M6X1.0ISO-6R1-900 02827360 M6 1,0 – * 3 –
0.185 0.236 2.165 0.492
4,7 6,0 52,0 8,5
TM-M6X1.0ISO-6R1-H 02827351 M6 1,0 – * 4 –
0.185 0.236 2.047 0.335
Annex
6,2 8,0 62,0 16,9

TM-M8X1.25ISO-8R1 02827405 M8 1,25 – * 3 ✔
0.244 0.315 2.441 0.665
6,2 8,0 62,0 16,9
TM-M8X1.25ISO-8R1-900 02827361 M8 1,25 – * 3 ✔
0.244 0.315 2.441 0.665
6,2 8,0 57,0 12,5
TM-M8X1.25ISO-8R1-H 02827352 M8 1,25 – * 4 –
0.244 0.315 2.244 0.492
216
www.secotools.com
Thread milling
Thread Through
mm mm mm mm
TPX TPIX
Inch Inch Inch Inch
Thread turning
7,8 10,0 74,0 20,5
TM-MF10X1.0ISO-10R1 02827401 M10 1,0 – ** 3 ✔
0.307 0.394 2.913 0.807
9,4 12,0 79,0 24,8
TM-MF12X1.5ISO-12R1 02827400 M12 1,5 – ** 3 ✔
0.370 0.472 3.110 0.976
9,4 12,0 79,0 24,8
TM-MF12X1.5ISO-12R1-900 02827365 M12 1,5 – ** 3 ✔
0.370 0.472 3.110 0.976
9,4 12,0 76,0 17,9
TM-MF12X1.5ISO-12R1-H 02827355 M12 1,5 – ** 5 –
0.370 0.472 2.992 0.705
10,92 14,0 82,0 21,4
TM-MF14X1.5ISO-14R1-H 02827356 M14 1,5 – ** 5 –
0.430 0.551 3.228 0.843
12,82 16,0 94,0 23,9
TM-MF16X1.5ISO-16R1-H 02827357 M16 1,5 – ** 5 –
0.505 0.630 3.701 0.941
MDT
3,15 6,0 49,0 8,3
TM-MF4X0.5ISO-6R1 02827392 M4 0,5 – ** 3 –
0.124 0.236 1.929 0.327
3,95 6,0 49,0 10,3
TM-MF5X0.5ISO-6R1 02827430 M5 0,5 – ** 3 –
0.156 0.236 1.929 0.406
4,7 6,0 55,0 12,4
TM-MF6X0.75ISO-6R1 02827429 M6 0,75 – ** 3 –
0.185 0.236 2.165 0.488
9,4 12,0 79,0 26,4
TM-1/2X13UNC-12R1 02827494 1/2 – 13.0 *** 3 ✔
0.370 0.472 3.110 1.039
4,7 6,0 55,0 14,6
TM-1/4X20UNC-6R1 02827511 1/4 – 20.0 *** 3 –
0.185 0.236 2.165 0.575
Mini-Shaft™
7,35 10,0 74,0 19,8
TM-3/8X16UNC-10R1 02827399 3/8 – 16.0 *** 3 ✔
0.289 0.394 2.913 0.780
6,2 8,0 62,0 16,2
TM-5/16X18UNC-8R1 02827495 5/16 – 18.0 *** 3 ✔
0.244 0.315 2.441 0.638
8,55 12,0 79,0 22,7
TM-7/16X14UNC-12R1 02827398 7/16 – 14.0 *** 3 ✔
0.337 0.472 3.110 0.894
10,9 14,0 89,0 30,7
TM-9/16X12UNC-14R1 02827493 9/16 – 12.0 *** 4 ✔
0.429 0.551 3.504 1.209
3,7 6,0 49,0 10,1
TM-NR.10X24UNC-6R1 02827491 No.10 – 24.0 *** 3 –
0.146 0.236 1.929 0.398
Thread milling
Thread tapping
Annex
217
www.secotools.com
Thread milling
Threadmaster™
Thread turning
Thread profile
* = UNF, for Internal Threading
** = NPT, for Internal and External Threading
*** = NPTF, for Internal and External Threading
**** = BSP, for Internal and External Threading
MDT

• TM; 2 x D
• Chamfer angle = 45°
Thread Through
mm mm mm mm
TPX TPIX
Inch Inch Inch Inch
9,4 12,0 79,0 26,0
TM-1/2X20UNF-12R1 02827393 1/2 – 20.0 * 3 ✔
0.370 0.472 3.110 1.024
Mini-Shaft™
4,7 6,0 55,0 14,1

TM-1/4X28UNF-6R1 02827396 1/4 – 28.0 * 3 –
0.185 0.236 2.165 0.555
7,8 10,0 74,0 19,6
TM-3/8X24UNF-10R1 02827395 3/8 – 24.0 * 3 ✔
0.307 0.394 2.913 0.772
6,2 8,0 62,0 16,4
TM-5/16X24UNF-8R1 02765298 5/16 – 24.0 * 3 ✔
0.244 0.315 2.441 0.646
9,32 12,0 79,0 22,2
TM-7/16X20UNF-12R1 02827394 7/16 – 20.0 * 3 ✔
0.367 0.472 3.110 0.874
10,9 14,0 89,0 28,9
TM-9/16X18UNF-14R1 02827492 9/16 – 18.0 * 4 ✔
0.429 0.551 3.504 1.138
3,95 6,0 49,0 9,9
TM-NR.10X32UNF-6R1 02827397 No.10 – 32.0 * 3 –
Thread milling
0.156 0.236 1.929 0.390

10,05 16,0 81,0 13,4
TM-1/4X18NPT-16R1 02827434 1/4 – 18.0 ** 4 ✔
0.396 0.630 3.189 0.528
7,8 12,0 70,0 8,9
TM-1/8X27NPT-12R1 02827435 1/8 – 27.0 ** 3 ✔
0.307 0.472 2.756 0.350
13,45 18,0 81,0 13,4
TM-3/8X18NPT-18R1 02827409 3/8 – 18.0 ** 4 ✔
0.530 0.709 3.189 0.528
10,0 16,0 81,0 13,4
TM-1/4X18NPTF-16R1 02827432 1/4 – 18.0 *** 4 ✔
0.394 0.630 3.189 0.528
7,7 12,0 70,0 8,9
TM-1/8X27NPTF-12R1 02827433 1/8 – 27.0 *** 3 ✔
0.303 0.472 2.756 0.350
Thread tapping
13,4 18,0 81,0 13,4

TM-3/8X18NPTF-18R1 02827410 3/8 – 18.0 *** 4 ✔
0.528 0.709 3.189 0.528
10,9 14,0 89,0 27,4
TM-1/4X19W-14R1 02543519 1/4 – 19.0 **** 4 ✔
0.429 0.551 3.504 1.079
7,8 10,0 74,0 20,4
TM-1/8X28W-10R1 02827431 1/8 – 28.0 **** 3 ✔
0.307 0.394 2.913 0.803
13,9 18,0 102,0 35,4
TM-3/8X19W-18R1 02765294 3/8 – 19.0 **** 4 ✔
0.547 0.709 4.016 1.394
Annex
218
www.secotools.com
Thread milling
Threadmaster™ – TM-Mini
Thread turning
Thread profile
* = Metric coarse, for Internal Threading
MDT
• Left-hand cutter
• TM : 1.5 x D
Thread Through
mm mm mm mm
TPX TPIX
Inch Inch Inch Inch
0,7 3,0 40,0 2,05
TM-M1.0X0.25ISO-3R1-H 02807939 M1.0 0,25 – * 2 –
0.028 0.118 1.575 0.081
Mini-Shaft™
0,97 3,0 40,0 2,63
TM-M1.4X0.30ISO-3R1-H 02807940 M1.4 0,3 – * 2 –
0.038 0.118 1.575 0.104
1,15 3,0 40,0 3,07
TM-M1.6X0.35ISO-3R1-H 02807941 M1.6 0,35 – * 2 –
0.045 0.118 1.575 0.121
1,56 3,0 40,0 3,74
TM-M2.0X0.40ISO-3R1-H 02807942 M2.0 0,4 – * 2 –
0.061 0.118 1.575 0.147
1,71 3,0 40,0 3,9
TM-M2.2X0.45ISO-3R1-H 02807943 M2.2 0,45 – * 2 –
0.067 0.118 1.575 0.154
2,01 3,0 40,0 4,45
TM-M2.5X0.45ISO-3R1-H 02807944 M2.5 0,45 – * 3 –
0.079 0.118 1.575 0.175
Thread milling
Thread tapping
Annex
219
www.secotools.com
Thread milling
Drilling Threadmaster™
Thread turning
Thread profile
* = Metric coarse
** = Metric fine
*** = UNC
**** = UNF
***** = BSP
MDT

• DTM; 2 x D
• Drill Point = 140°
Thread Through
Designation Item number TDZ Pitch profile DC DC1 DC2 DMM ALD OAL APMXS NOF coolant
mm mm mm mm mm mm mm
TPX TPIX
8,08 8,5 10,3 12,0 1,5 79,0 23,37
DTM-M10X1.5ISO-12R1 02827370 M10 1,5 – * 2 ✔
0.318 0.335 0.406 0.472 0.059 3.110 0.920
Mini-Shaft™
9,74 10,25 12,3 14,0 1,5 89,0 27,06

DTM-M12X1.75ISO-14R1 02827371 M12 1,75 – * 2 ✔
0.383 0.404 0.484 0.551 0.059 3.504 1.065
11,36 12,0 14,3 16,0 1,5 102,0 32,77
DTM-M14X2.0ISO-16R1 02827372 M14 2,0 – * 2 ✔
0.447 0.472 0.563 0.630 0.059 4.016 1.290
13,28 14,0 16,3 18,0 1,5 102,0 37,12
DTM-M16X2.0ISO-18R1 02827373 M16 2,0 – * 2 ✔
0.523 0.551 0.642 0.709 0.059 4.016 1.461
3,24 3,3 4,3 6,0 0,7 49,0 9,42
DTM-M4X0.7ISO-6R1 02827366 M4 0,7 – * 2 ✔
0.128 0.130 0.169 0.236 0.028 1.929 0.371
4,1 4,2 5,3 6,0 0,8 55,0 11,65
DTM-M5X0.8ISO-6R1 02827367 M5 0,8 – * 2 ✔
0.161 0.165 0.209 0.236 0.031 2.165 0.459
4,85 5,0 6,3 8,0 1,0 62,0 14,49
Thread milling
DTM-M6X1.0ISO-8R1 02827368 M6 1,0 – * 2 ✔

0.191 0.197 0.248 0.315 0.039 2.441 0.570
6,45 6,75 8,3 10,0 1,2 74,0 18,17
DTM-M8X1.25ISO-10R1 02827369 M8 1,25 – * 2 ✔
0.254 0.266 0.327 0.394 0.047 2.913 0.715
8,75 9,0 10,3 12,0 1,5 79,0 23,18
DTM-MF10X1.0ISO-12R1 02827375 M10 1,0 – ** 2 ✔
0.344 0.354 0.406 0.472 0.059 3.110 0.913
10,06 10,5 12,3 14,0 1,5 89,0 28,19
DTM-MF12X1.5ISO-14R1 02827376 M12 1,5 – ** 2 ✔
0.396 0.413 0.484 0.551 0.059 3.504 1.110
6,79 7,0 8,3 10,0 1,0 74,0 18,8
DTM-MF8X1.0ISO-10R1 02827374 M8 1,0 – ** 2 ✔
0.267 0.276 0.327 0.394 0.039 2.913 0.740
9,87 10,75 13,0 14,0 1,5 89,0 30,07
DTM-1/2X13UNC-14R1 02827380 1/2 – 13.0 *** 2 ✔
0.389 0.423 0.512 0.551 0.059 3.504 1.184
Thread tapping
4,7 5,08 6,65 8,0 1,2 62,0 15,71

DTM-1/4X20UNC-8R1 02827377 1/4 – 20.0 *** 2 ✔
0.185 0.200 0.262 0.315 0.047 2.441 0.619
7,36 7,94 9,83 12,0 1,5 79,0 22,97
DTM-3/8X16UNC-12R1 02827379 3/8 – 16.0 *** 2 ✔
0.290 0.313 0.387 0.472 0.059 3.110 0.904
6,01 6,53 8,24 10,0 1,4 74,0 19,0
DTM-5/16X18UNC-10R1 02827378 5/16 – 18.0 *** 2 ✔
0.237 0.257 0.324 0.394 0.055 2.913 0.748
10,88 11,43 13,0 14,0 1,3 89,0 28,19
DTM-1/2X20UNF-14R1 02827384 1/2 – 20.0 **** 2 ✔
0.428 0.450 0.512 0.551 0.051 3.504 1.110
5,17 5,44 6,65 8,0 0,9 62,0 15,16
DTM-1/4X28UNF-8R1 02827381 1/4 – 28.0 **** 2 ✔
0.204 0.214 0.262 0.315 0.035 2.441 0.597
8,07 8,47 9,83 12,0 1,1 79,0 21,2
DTM-3/8X24UNF-12R1 02827383 3/8 – 24.0 **** 2 ✔
0.318 0.333 0.387 0.472 0.043 3.110 0.835
Annex
6,51 6,88 8,24 10,0 1,1 74,0 18,83

DTM-5/16X24UNF-10R1 02827382 5/16 – 24.0 **** 2 ✔
0.256 0.271 0.324 0.394 0.043 2.913 0.741
11,44 11,67 13,46 16,0 1,3 102,0 29,45
DTM-1/4X19W-16R1 02827386 1/4 – 19.0 ***** 2 ✔
0.450 0.459 0.530 0.630 0.051 4.016 1.159
8,4 8,71 10,03 12,0 0,9 79,0 22,03
DTM-1/8X28W-12R1 02827385 1/8 – 28.0 ***** 2 ✔
0.331 0.343 0.395 0.472 0.035 3.110 0.867
220
www.secotools.com
Thread milling
Cutting data
Threadmaster™ – Cutting data metric Inch
TM TM-900 TM-H TM-MINI
Thread turning
SMG
fz vc fz vc fz vc fz vc
0,010 145 — — — — — —
P1
0.00040 475 — — — — — —
0,010 140 — — — — — —
P2
0.00040 460 — — — — — —
0,0095 120 — — — — — —
P3
0.00038 395 — — — — — —
0,0095 105 0,0040 105 — — — —
P4
0.00038 345 0.00016 345 — — — —
0,0090 100 0,0040 100 — — — —
P5
0.00036 330 0.00016 330 — — — —
0,0090 115 0,0040 115 — — — —
P6
0.00036 375 0.00016 375 — — — —
0,0090 110 0,0040 110 — — — —
P7
0.00036 360 0.00016 360 — — — —
MDT
0,0095 100 0,0042 100 — — — —
P8
0.00038 330 0.00017 330 — — — —
0,0090 105 0,0040 105 — — — —
P11
0.00036 345 0.00016 345 — — — —
0,0060 60 0,0028 60 — — — —
P12
0.00024 195 0.00011 195 — — — —
0,010 100 0,0044 100 — — — —
M1
0.00040 330 0.00017 330 — — — —
0,0090 80 0,0040 80 — — — —
M2
0.00036 260 0.00016 260 — — — —
0,0075 60 0,0032 60 — — — —
M3
0.00030 195 0.00013 195 — — — —
Mini-Shaft™
0,0065 47 0,0028 47 — — — —
M4
0.00026 155 0.00011 155 — — — —
0,0065 39 0,0028 39 — — — —
M5
0.00026 130 0.00011 130 — — — —
0,010 145 0,0044 100 — — — —
K1
0.00040 475 0.00017 330 — — — —
0,0090 125 0,0040 90 — — — —
K2
0.00036 410 0.00016 295 — — — —
0,0090 105 0,0040 75 — — — —
K3
0.00036 345 0.00016 245 — — — —
0,0090 100 0,0040 70 — — — —
K4
0.00036 330 0.00016 230 — — — —
0,0080 60 0,0036 42 — — — —
Thread milling
K5
0.00032 195 0.00014 140 — — — —
0,0090 90 0,0040 65 — — — —
K6
0.00036 295 0.00016 215 — — — —
0,0080 80 0,0036 55 — — — —
K7
0.00032 260 0.00014 180 — — — —
0,013 395 0,0055 335 — — — —
N1
0.00050 1300 0.00022 1100 — — — —
0,013 255 0,0055 215 — — — —
N2
0.00050 840 0.00022 710 — — — —
0,013 170 0,0055 145 — — — —
N3
0.00050 560 0.00022 475 — — — —
0,013 225 0,0055 195 — — — —
N11
0.00050 740 0.00022 640 — — — —
Thread tapping
0,0065 50 0,0028 20 — — — —
S1
0.00026 165 0.00011 65 — — — —
0,0065 41 0,0028 15 — — — —
S2
0.00026 135 0.00011 49 — — — —
0,0060 20 0,0026 10 — — — —
S3
0.00024 65 0.00010 33 — — — —
0,0075 105 0,0032 40 — — — —
S11
0.00030 345 0.00013 130 — — — —
0,0075 80 0,0032 31 — — — —
S12
0.00030 260 0.00013 100 — — — —
0,0065 65 0,0028 24 — — — —
S13
0.00026 215 0.00011 80 — — — —
— — — — 0,0016 19 0,0022 11
H3
— — — — 0.000065 60 0.000085 36
— — — — 0,0025 36 0,0032 21
H5
— — — — 0.00010 120 0.00013 70
Annex
— — — — 0,0016 19 0,0022 11
H7
— — — — 0.000065 60 0.000085 36
— — — — 0,0019 36 0,0025 21
H8
— — — — 0.000075 120 0.00010 70
— — — — 0,0025 45 0,0032 26
H11
— — — — 0.00010 150 0.00013 85
221
www.secotools.com
Thread milling
Cutting data
TM TM-900 TM-H TM-MINI

SMG
fz vc fz vc fz vc fz vc
Thread turning
— — — — 0,0019 41 0,0025 24
H12
— — — — 0.000075 135 0.00010 80
— — — — 0,0019 36 0,0025 21
H21
— — — — 0.000075 120 0.00010 70
H31 — — — — — — — —

fz = mm/tooth (mm/flute)
vc= m/min
All cutting data are start values
All feed are related to the centre of the cutter and not the periphery.
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
222
www.secotools.com
Thread milling
Cutting data
Drilling Threadmaster™ – Cutting data, threadmilling metric inch
DTM
Thread turning
SMG
fz vc
0,0065 175
K1
0.00026 570
0,0060 155
K2
0.00024 510
0,0060 130
K3
0.00024 425
0,0060 125
K4
0.00024 410
0,0055 75
K5
0.00022 245
0,0060 110
K6
0.00024 360
0,0055 95
K7
0.00022 310
MDT
0,0085 400
N1
0.00034 1300
0,0085 255
N2
0.00034 840
0,0085 170
N3
0.00034 560
0,0085 225
N11
0.00034 740
Drilling Threadmaster™ – Cutting data, drilling metric inch
Mini-Shaft™
f vc
SMG Ø 3.01-5.0 Ø 5.01-7.0 Ø 7.01-9.0 Ø 9.01-11.0 Ø 11.01-13.0 Ø 13.01-15.0

Ø 0.118-0.196 Ø 0.197-0.275 Ø 0.276-0.354 Ø 0.355-0.433 Ø 0.434-0.511 Ø 0.512-0.590
0,12 0,15 0,18 0,19 0,22 0,25 170

K1
0.0048 0.0060 0.0070 0.0075 0.0085 0.010 560
0,11 0,13 0,16 0,17 0,20 0,22 150
K2
0.0044 0.0050 0.0065 0.0065 0.0080 0.0085 490
0,11 0,13 0,16 0,17 0,20 0,22 125
K3
0.0044 0.0050 0.0065 0.0065 0.0080 0.0085 410
0,11 0,13 0,16 0,17 0,20 0,22 120
K4
Thread milling
0.0044 0.0050 0.0065 0.0065 0.0080 0.0085 395
0,095 0,12 0,14 0,16 0,18 0,20 70
K5
0.0038 0.0048 0.0055 0.0065 0.0070 0.0080 230
0,11 0,13 0,16 0,17 0,20 0,22 105
K6
0.0044 0.0050 0.0065 0.0065 0.0080 0.0085 345
0,095 0,12 0,14 0,16 0,18 0,20 90
K7
0.0038 0.0048 0.0055 0.0065 0.0070 0.0080 295
0,15 0,19 0,22 0,24 0,28 0,32 390
N1
0.0060 0.0075 0.0085 0.0095 0.011 0.013 1275
0,15 0,19 0,22 0,24 0,28 0,32 250
N2
0.0060 0.0075 0.0085 0.0095 0.011 0.013 820
0,15 0,19 0,22 0,24 0,28 0,32 165
N3
0.0060 0.0075 0.0085 0.0095 0.011 0.013 540
0,15 0,19 0,22 0,24 0,28 0,32 220
Thread tapping
N11
0.0060 0.0075 0.0085 0.0095 0.011 0.013 720

f = mm/rev
vc= m/min
Feed are related to the centre of the cutter and not the periphery.
Annex
223
www.secotools.com
Thread milling
Cutting data
Thread Milling 396.18/19/20 Cutting data metric inch
CP500 F30M H15

Thread turning
SMG
fz vc fz vc fz vc
0,050 385 0,050 385 — —
P1
0.0020 1275 0.0020 1275 — —
0,055 375 0,055 375 — —
P2
0.0022 1225 0.0022 1225 — —
0,050 325 0,050 325 — —
P3
0.0020 1075 0.0020 1075 — —
0,050 285 0,050 285 — —
P4
0.0020 940 0.0020 940 — —
0,048 275 0,048 275 — —
P5
0.0019 900 0.0019 900 — —
0,048 305 0,048 305 — —
P6
0.0019 1000 0.0019 1000 — —
0,048 290 0,048 290 — —
P7
0.0019 950 0.0019 950 — —
MDT
0,050 275 0,050 275 — —

P8
0.0020 900 0.0020 900 — —
0,048 280 0,048 280 — —
P11
0.0019 920 0.0019 920 — —
0,032 165 0,032 165 — —
P12
0.0013 540 0.0013 540 — —
0,055 285 0,055 285 — —
M1
0.0022 940 0.0022 940 — —
0,048 230 0,048 230 — —
M2
0.0019 750 0.0019 750 — —
0,038 175 0,038 175 — —
M3
0.0015 570 0.0015 570 — —
Mini-Shaft™
0,034 130 0,034 130 — —

M4
0.0013 425 0.0013 425 — —
0,034 110 0,034 110 — —
M5
0.0013 360 0.0013 360 — —
0,055 300 0,055 300 0,040 270
K1
0.0022 980 0.0022 980 0.0016 890
0,048 260 0,048 260 0,038 235
K2
0.0019 850 0.0019 850 0.0015 770
0,048 220 0,048 220 0,038 200
K3
0.0019 720 0.0019 720 0.0015 660
0,048 210 0,048 210 0,038 190
K4
0.0019 690 0.0019 690 0.0015 620
0,044 125 0,044 125 0,034 115
Thread milling
K5
0.0017 410 0.0017 410 0.0013 375
0,048 185 0,048 185 0,038 170
K6
0.0019 610 0.0019 610 0.0015 560
0,044 160 0,044 160 0,034 145
K7
0.0017 520 0.0017 520 0.0013 475
0,070 1375 0,070 1375 0,050 1375
N1
0.0028 4500 0.0028 4500 0.0020 4500
0,070 890 0,070 890 0,050 890
N2
0.0028 2925 0.0028 2925 0.0020 2925
0,070 590 0,070 590 0,050 590
N3
0.0028 1925 0.0028 1925 0.0020 1925
0,070 780 0,070 780 — —
N11
0.0028 2550 0.0028 2550 — —
Thread tapping

vc= m/min (for holder types -065AM, -079AM and -080AM use factor 0,75 on vc)
All feed are related to the centre of the cutter and not the periphery.
Annex
224
www.secotools.com
Thread milling
Cutting data
Feed related to the centre of the cutter

When calculating feed and feed/tooth from average chip thickness using circular interpolation or helical interpolation ramping in an operation, the feed and feed/tooth are always
related to the centre and not to the periphery of the cutter.
Tolerance on the machined component.
Thread turning
The tolerance on the thread diameter is 6H when using a cutter with more than one tooth. With a single cutting insert the tolerance is 4H. If a multi-tooth milling cutter is used with
one cutting insert, the other insert seat(s) must be equipped with non-cutting blank insert(s) to stabilise the milling cutter during the cutting process.
As all 396.19 inserts are double sided, it is important that all inserts are mounted in the same position to achieve best possible tolerance. It must be done by indexing the identifica-
tion dots in the same position. See figure.
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
225
www.secotools.com
Thread milling
Cutting data
Cutting speed Thread milling 335.14 metric inch
R335.14
Thread turning
SMG
fz vc
0,070 275
P1
0.0028 900
0,070 270
P2
0.0028 890
0,070 230
P3
0.0028 750
0,065 205
P4
0.0026 670
0,065 195
P5
0.0026 640
0,065 215
P6
0.0026 710
0,065 205
P7
0.0026 670
MDT
0,070 195
P8
0.0028 640
0,065 200
P11
0.0026 660
0,044 120
P12
0.0017 395
0,070 215
M1
0.0028 710
0,065 175
M2
0.0026 570
0,050 130
M3
0.0020 425
Mini-Shaft™
0,046 100
M4
0.0018 330
0,046 80
M5
0.0018 260
0,070 210
K1
0.0028 690
0,065 185
K2
0.0026 610
0,065 180
K3
0.0026 590
0,065 150
K4
0.0026 490
0,060 90
Thread milling
K5
0.0024 295
0,065 130
K6
0.0026 425
0,060 115
K7
0.0024 375
0,090 970
N1
0.0036 3175
0,090 620
N2
0.0036 2025
0,090 415
N3
0.0036 1350
0,090 475
N11
0.0036 1550
Thread tapping
0,046 50
S1
0.0018 165
0,046 41
S2
0.0018 135
0,042 35
S3
0.0017 115
0,050 65
S11
0.0020 215
0,050 50
S12
0.0020 165
0,046 39
S13
0.0018 130
0,044 43
H5
0.0017 140
0,034 45
H8
0.0013 150
Annex
0,044 60
H11
0.0017 195
0,034 55
H12
0.0013 180
0,034 45
H21
0.0013 150
226
www.secotools.com
Thread milling
Code keys
Code keys
Threadmaster™
Thread turning
DTM = Drilling Threadmaster™ Pitch Shank dia Additional info
TM = Threadmaster™ (2 x D)
TM M10 x 1.5 ISO – 10 R1 – 900

Thread diameter (tdz) min Thread form
Hand/shank style
R1 = Cylindrical
MDT
R396.18/19/20
Cutter Cutter dia Insert size Usable length Upgraded
design
Mini-Shaft™
R396.19 - 25 22 . 3S - 4003 - 3 - 065 A M
Shank dia Seco-Weldon No. of inserts Through coolant
Thread milling
Insert 396.19/20
Insert type Insert size Thread form
R 396.19 - 4003.0 E - 1.0 ISO

Thread tapping
E=External Pitch
N=Internal
Hand of tool used on taper thread X=Ext. and Int.
Annex
227
www.secotools.com
Thread milling
Code keys
Code keys
Disc Milling cutter 335.14
Thread turning
2 types of shanks available: cylindrical available both in steel and carbide, or ER collet chuck system
Mini disc
Right hand System Width of cut: example 1.5 mm Edge geometry
MDT
rotation Alternative:
R20: Corner radius for full radius - example
R = 2 mm
C45: Top/ bottom chamfering - example 45°
R 335 . 14 - 217 150 . 12 Z3 - M03 F32M

Mini-Shaft™
Disc Milling code Head diameter example: Connection size (insert/shank) No. of teeth Grade
21.7 mm in mm. Example: 12 mm
Cylindrical shank
System Connection size Access length including insert 45 mm -E for carbide shank
(insert/shank) Alternative inch, example 177 for 1.77” otherwise
Example: 9 mm steel shank
Thread milling
335 . 14 - 16 9 . 0 - 45 - 110 - E
Shank diameter
DMM = 16 mm .0 cylindrical Overall length including insert 110 mm.
Alternative inch, example 0625 connection Alternative inch, example 433 for 4.33”
Disc Milling code
for DMM = 0.625” type
Thread tapping
Collet chuck
System Connection size (insert / shank)
Example: 12 mm
335 . 14 - ER25 - 12 - 30
Annex
Access length
ER Collet chuck size including insert.
Disc Milling code Example 30 mm
228
www.secotools.com
Thread milling
Indexable
Thread turning
MDT
Mini-Shaft™
Thread milling Indexable
Seco 396.18/19/20 thread mills are versatile, cost-effective process tools for anyone facing a variety of threads, parts
and workpiece materials on the same machine. Multi-tooth indexable insert cutters use a double sided multi-tooth
insert usable above Ø 14 mm for both internal and external threads.
Thread milling
■ Inserts available with different thread profiles and pitches.
■ Multi-tooth cutters for high productivity.
■ Arbor, Weldon and SecoWeldon shanktypes.
Thread tapping
Annex
229
www.secotools.com
Thread milling
Indexable
R396.18/R396.19
Thread turning
MDT
• For cutting data see page(s) 224, 225

• For insert information see page(s) 238-240
• Min thread diameter, see page(s) 237
• Note: Type of mounting * = Weldon Tool angle:
• Note: Type of mounting ** = Seco-Weldon GAMO= -15°
GAMP= 0°
GAMF= -15°
Item
Designation number DC DMM OAL APMXS BD DCSFMS LPR LUX LS Weight NOF RPMX Note Insert
Mini-Shaft™
R396.18-2012.3-13A 75036662 12,0 20,0 105,0 13,0 10,0 – 38,0 20,0 67,0 0,2 1 30000 * –
R396.19-2517.3S-4003-2AM 02534461 17,0 25,0 116,0 25,0 13,0 40,0 60,0 26,0 56,0 0,5 2 22400 ** –
R396.19-2522.3S-4003-3-065AM 02546918 22,0 25,0 140,0 40,0 17,6 40,0 84,0 65,0 56,0 0,5 3 20000 ** –
R396.19-2522.3S-4003-3AM 02514532 22,0 25,0 116,0 40,0 17,6 40,0 60,0 43,0 56,0 0,4 3 20000 ** –
R396.19-2525.3S-4005-2AM 02544660 25,0 25,0 116,0 40,0 19,0 40,0 60,0 43,0 56,0 0,4 2 13600 ** –
R396.19-2530.3S-4005-3-080AM 02544662 30,0 25,0 154,0 40,0 22,2 40,0 98,0 80,0 56,0 0,6 3 12000 ** –
R396.19-2530.3S-4005-3AM 02546916 30,0 25,0 116,0 40,0 23,0 40,0 60,0 43,0 56,0 0,5 3 12000 ** –
R396.19-3232.3S-4003-6AM 02546915 32,0 32,0 120,0 40,0 27,4 50,0 60,0 43,0 60,0 0,7 6 16800 ** –
Thread milling
R396.19-3236.3S-4005-6AM 02546917 36,0 32,0 120,0 40,0 28,2 50,0 60,0 42,0 60,0 0,7 6 11200 ** –
For holders Fastening screw Insert key Insert screw Key (T-handle)
R396.18 – H4B-T07P C02506-T07P DOUBLE-T

R396.19 P6SS4X4-T09P T09P-2 – –
Thread tapping
Note! When milling threads to smaller diameters than indicated for a certain pitch/cutter combination, an incorrect thread form will result.
Note! R396.19-2525.3S-4005-2AM Max pitch sze 4,5 ISO/6 TPI can be used.
*Torque key T00-07P09, T00-09P20.
Annex
230
www.secotools.com
Thread milling
Indexable
R396.18/R396.19
Thread turning
MDT
Tool angle: • Note: Type of mounting * = Weldon
GAMO= -15° • Note: Type of mounting ** = Seco-Weldon
GAMP= 0°
GAMF= -15°
Item
Inch Inch Inch Inch Inch Inch Inch Inch Inch lbs
Mini-Shaft™
R396.18-00.39-3-13AT 00087568 0.390 0.750 4.140 0.510 0.310 – – 0.530 3.610 0.440 1 30000 * –
R396.18-00.50-3-13A 75054862 0.472 0.750 4.140 0.510 0.390 – – 0.780 3.360 0.660 1 30000 * –
R396.18-00.50-3-13AT 00074293 0.509 0.750 4.134 0.512 0.310 – – 0.746 2.997 0.440 1 30000 * –
R396.19-00.58-3S-1AM 02546957 0.591 1.000 4.803 1.102 0.450 1.575 2.362 1.024 2.441 1.100 1 22400 ** –
R396.19-00.67-3S-4003-2AM 02546937 0.669 1.000 4.547 0.984 0.512 1.575 2.362 1.024 2.185 1.100 2 22000 ** –
R396.19-00.87-3S-4003-3AM 02546938 0.866 1.000 4.547 1.575 0.709 1.575 2.362 1.693 2.185 1.100 3 20000 ** –
R396.19-00.87-3S-4003-LAM 02546950 0.866 1.000 5.512 1.575 0.709 1.575 3.307 2.559 2.185 1.100 3 20000 ** –
R396.19-01.00-3S-4005-2AM 02546944 0.984 1.000 4.547 1.575 0.748 1.575 2.362 1.693 2.185 1.100 2 13600 ** –
Thread milling
R396.19-01.18-3S-4005-3AM 02546946 1.181 1.000 4.547 1.575 0.906 1.575 2.362 1.693 2.185 1.100 3 12000 ** –
R396.19-01.18-3S-4005-LAM 02546954 1.181 1.000 6.043 1.575 0.906 1.575 3.858 3.150 2.185 1.320 3 12000 ** –
R396.19-01.25-3S-4003-6AM 02546941 1.260 1.250 4.547 1.575 1.102 1.969 2.362 1.654 2.343 1.540 6 16800 ** –
R396.19-01.42-3S-4005-6AM 02546947 1.417 1.250 4.705 1.575 1.142 1.969 2.362 1.654 2.343 1.540 6 11200 ** –
For holders Fastening screw Insert key Insert screw Key (T-handle) Screw
Thread tapping
..18-00.39.. – H4B-T07P – DOUBLE-T C02505-T07P

..18-00.50..A – H4B-T07P C02506-T07P DOUBLE-T –
..18-00.50..AT – H4B-T07P C02505-T07P DOUBLE-T –
..19-00.58..–..19-01.42.. P6SS4X4-T09P T09P-2 – – –
*Torque key T00-07P09, T00-09P20.
Annex
231
www.secotools.com
Thread milling
Indexable
R396.19
Thread turning
MDT

• Note: Type of mounting ** = Seco-Weldon Tool angle:
GAMO= -15°
GAMP= 0°
GAMF= -15°
Item
Mini-Shaft™
R396.19-3232.3S-4003-3-079AM 02963138 32,0 32,0 156,0 40,0 27,4 50,0 96,0 79,57 60,0 0,9 3 20000 ** –
R396.19-3232.3S-4005-3-079AM 02963139 32,0 32,0 156,0 40,0 24,2 50,0 96,0 79,0 60,0 0,9 3 11200 ** –
For holders Fastening screw Insert key

Thread milling
R396.19 P6SS4X4-T09P T09P-2
*Torque key T00-07P09, T00-09P20.
Thread tapping
Annex
232
www.secotools.com
Thread milling
Indexable
R396.19
Thread turning
MDT
Tool angle:
GAMO= -15°
GAMP= 0°
GAMF= -15°
Designation Item number DC APMXS BD LF Weight NOF RPMX Insert
mm mm mm mm kg
Mini-Shaft™
R396.19-0058-4003-6AM 02546921 58,0 40,0 53,0 50,0 0,7 6 8600 –
R396.19-0058-4005-6AM 02546920 58,0 40,0 50,0 50,0 0,6 6 8600 –
For holders Arbor screw Fastening screw Insert key
Thread milling
...6AM MC6S12X40 P6SS4X4-T09P T09P-2
*Torque values 2 Nm. Torque key, T00-09P20.
Thread tapping
Annex
233
www.secotools.com
Thread milling
Indexable
R396.19
Thread turning
MDT

Tool angle:
GAMO= -15°
GAMP= 0°
GAMF= -15°
Inch Inch Inch Inch lbs

Mini-Shaft™
R396.19-02.28-4003-6AM 02546955 2.283 1.575 2.087 1.969 1.760 6 8600 –

R396.19-02.28-4005-6AM 02546956 2.283 1.575 1.969 1.969 1.540 6 8600 –
For holders Arbor screw Fastening screw Insert key

Thread milling
UC6S1/2UNFX1-1/4 P6SS4X4-T09P T09P-2

Thread tapping
Annex
234
www.secotools.com
Thread milling
Indexable
R396.20
Thread turning
MDT
• For insert information see page(s) 241
Tool angle:
GAMO= -15°
GAMP= -15°
GAMF= -15°
Inch Inch Inch Inch lbs
Mini-Shaft™
R396.20-02.478-4005-9AW 03013869 2.478 1.575 2.106 1.992 1.320 9 8600 –
For holders Arbor screw Key Key (T-handle) Wedge clamp Wedge screw
R396.20 UC6S1/2UNFX1-1/2 H4B-T08P DOUBLE-T CW0405M LD4012-T08P
Thread milling
Thread tapping
Annex
235
www.secotools.com
Thread milling
Indexable
Min thread diameter (major dia), for different pitch and cutter combinations
Thread turning
R396.18/R396.19/R396.20
Pitch mm
For cutter TPI
1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6

24 16 12 10 8 7 6 5 4
R396.18-2012.3-13A 14 15 16 – – – – – – – –
R396.19-0058-4003-6AM 62 63 65 66 67 – – – – – –
R396.19-0058-4005-6AM – – – – 67 69 70 71 72 73 74
R396.19-2517.3S-4003-2AM 19 20 21 22 24 – – – – – –
R396.19-2522.3S-4003-3-065AM 24 25 26 27 27 – – – – – –
R396.19-2522.3S-4003-3AM 24 25 26 27 27 – – – – – –
R396.19-2525.3S-4005-2AM – – – – 30 33 35 37 – – –
MDT
R396.19-2530.3S-4005-3-080AM – – – – 38 40 42 44 45 47 48
R396.19-2530.3S-4005-3AM – – – – 38 40 42 44 45 47 48
R396.19-3232.3S-4003-3-079AM 34 35 36 39 40 – – – – – –
R396.19-3232.3S-4003-6AM 34 35 36 39 40 – – – – – –
R396.19-3232.3S-4005-3-079AM – – – – 39 41 43 45 46 48 49
R396.19-3236.3S-4005-6AM – – – – 43 45 47 47 48 50 53
R396.20-02.478-4005-9AW – – – – 80 – 84 – – – 89
Dimensions of mounting
Mini-Shaft™
For cutter Item number DCB DCSFMS KWW C For arbor
mm mm mm mm
R396.19-3232.3S-4003-3-079AM 02963138 – 50,0 – – –

R396.19-3232.3S-4003-6AM 02546915 – 50,0 – – –
R396.20-02.478-4005-9AW 03013869 25,4 53,5 9,7 5,7 25,4
Thread milling
Thread tapping
Annex
236
www.secotools.com
Thread milling
Inserts
13NMS/XMS
Thread turning
Tolerances:
INSL = ± 0,012 mm
HC = ± 0,012 mm
S = ± 0,025 mm
Designation Insert INSL S Grades
mm mm CP500 F30M H15

Inch Inch
13,0 2,5
13NMS1.0ISO For internal threading [
0.512 0.098
MDT
13,0 2,5
0.512 0.098
13,0 2,5
13NMS16UN For internal threading [
0.512 0.098
13,0 2,5
0.512 0.098
13,0 2,5
0.512 0.098
13,0 2,5
Mini-Shaft™
0.512 0.098
13,0 2,5
13XMS14W For external and internal threading [
0.512 0.098
13,0 2,5
13XMS19W For external and internal threading [
0.512 0.098
[ Stock standard.
Thread milling
Thread tapping
Annex
237
www.secotools.com
Thread milling
Inserts
396.19-4003
Thread turning
Tolerances:
INSL = ± 0,007 mm
HC = ± 0,012 mm
S = ± 0,05 mm

Inch Inch
MDT
40,0 3,5
396.19-4003.0E1.0ISO For external threading [
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
396.19-4003.0E12UN For external threading [
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
Mini-Shaft™
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
396.19-4003.0N1.0ISO For internal threading [ [
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
396.19-4003.0N10UN For internal threading [
1.575 0.138
40,0 3,5
396.19-4003.0N12UN For internal threading [ [
Thread milling
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
396.19-4003.0N2.5ISO For internal threading [
1.575 0.138
Thread tapping
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
396.19-4003.0X11W For external and internal threading [
1.575 0.138
40,0 3,5
1.575 0.138
40,0 3,5
Annex

1.575 0.138
40,0 3,5
1.575 0.138
[ Stock standard.
238
www.secotools.com
Thread milling
Inserts
396.19-4003/4005
Thread turning

Inch Inch
40,0 3,5
396.19-4003XX Non cutting blank [
1.575 0.138
MDT
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
396.19-4005.0N4.5UN For internal threading [
1.575 0.191
40,0 4,85
Mini-Shaft™
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
Thread milling
40,0 4,85
1.575 0.191
40,0 4,85
1.575 0.191
40,0 4,85
396.19-4005XX Non cutting blank [
1.575 0.191
40,0 3,5
R396.19-4003.0X11.5NPT For external and internal threading [
1.575 0.138
40,0 3,5
R396.19-4003.0X11.5NPTF For external and internal threading [
1.575 0.138
40,0 3,5
Thread tapping
R396.19-4003.0X11BSPT For external and internal threading [
1.575 0.138
40,0 3,5
R396.19-4003.0X14BSPT For external and internal threading [
1.575 0.138
40,0 3,5
R396.19-4003.0X14NPT For external and internal threading [
1.575 0.138
40,0 3,5
R396.19-4003.0X14NPTF For external and internal threading [
1.575 0.138
40,0 4,85
R396.19-4005.0X8NPT For external and internal threading [
1.575 0.191
[ Stock standard.
Annex
239
www.secotools.com
Thread milling
Inserts
396.20-4005
Thread turning

Inch Inch
MDT
40,0 4,9
396.20-4005.0N3ACME For internal threading [
1.575 0.193
40,0 4,9
1.575 0.193
40,0 4,85
396.20-4005.0N4BUT For internal threading [
1.575 0.191
40,0 4,9
1.575 0.193
[ Stock standard.
Mini-Shaft™
Thread milling
Thread tapping
Annex
240
www.secotools.com
Thread milling
Shanks
Thread turning
MDT
Mini-Shaft™
Thread milling Shanks
Generate precision threads in holes as deep as 106 mm with Seco’s new single raw Disc Mill 335.14 interchangeable
threading heads and matching holder shanks. You will also be able to boost processing speed and versatility, as
each head performs both chamfering and threading operations. Additionally, performing two operations with the
Thread milling
same tool helps reduce required tooling inventories.
■ Both carbide and steel shank types.

■ Internal coolant capability.
■ Over 31 different carbide-coated heads.
Thread tapping
Annex
241
www.secotools.com
Thread milling
Shanks
335.14 Shank - Cylindrical version

Thread turning
MDT

• Technical information, see page 213, 214
• -E = Carbide shank with DMM tolerance = h6
• Steel shank: DMM tolerance = g6
• Max RPM = 30 000 rev/min
Through
Designation Item number DCSFWS DMM LF OAL LPR Weight coolant Insert
mm mm mm mm mm kg
335.14-1006.0-015-060 03042024 6,0 10,0 11,5 56,5 16,5 0,1 – R335.14...06Z..

335.14-1008.0-017-060 03042040 8,0 10,0 12,5 55,5 15,5 0,1 – R335.14...08Z..
Mini-Shaft™
335.14-1206.0-021-080-E 03042025 6,0 12,0 17,5 76,5 31,5 0,1 ✔ R335.14...06Z..

335.14-1206.0-030-090-E 03042026 6,0 12,0 26,5 86,5 41,5 0,2 ✔ R335.14...06Z..
335.14-1206.0-042-100-E 03042027 6,0 12,0 38,5 96,5 51,5 0,2 ✔ R335.14...06Z..
335.14-1208.0-029-095-E 03042041 8,0 12,0 24,5 90,5 45,5 0,2 ✔ R335.14...08Z..
335.14-1208.0-042-110-E 03042042 8,0 12,0 37,5 105,5 60,5 0,2 ✔ R335.14...08Z..
335.14-1208.0-056-120-E 03042043 8,0 12,0 51,5 115,5 70,5 0,2 ✔ R335.14...08Z..
335.14-1609.0-018-080 03042028 9,0 16,0 12,2 74,2 26,2 0,2 ✔ R335.14...09Z..
335.14-1609.0-032-100-E 03042029 9,0 16,0 26,2 94,2 46,2 0,3 ✔ R335.14...09Z..
Thread milling
335.14-1609.0-045-110-E 03042030 9,0 16,0 39,2 104,2 56,2 0,3 ✔ R335.14...09Z..

335.14-1609.0-064-130-E 03042031 9,0 16,0 58,2 124,2 76,2 0,3 ✔ R335.14...09Z..
335.14-1612.0-024-080 03042032 12,0 16,0 18,3 74,3 26,3 0,1 ✔ R335.14...12Z..
335.14-1612.0-042-100-E 03042033 12,0 16,0 36,3 94,3 46,3 0,2 ✔ R335.14...12Z..
335.14-1612.0-060-130-E 03042034 12,0 16,0 54,3 124,3 76,3 0,3 ✔ R335.14...12Z..
335.14-1612.0-085-160-E 03042035 12,0 16,0 76,3 154,3 106,3 0,4 ✔ R335.14...12Z..
335.14-1614.0-042-100-E 03042036 14,3 16,0 35,5 93,5 45,5 0,3 ✔ R335.14...14Z..
335.14-1614.0-060-130-E 03042037 14,3 16,0 53,5 123,5 75,5 0,3 ✔ R335.14...14Z..
335.14-1614.0-085-160-E 03042038 14,3 16,0 78,5 153,5 105,5 0,4 ✔ R335.14...14Z..
Thread tapping
335.14-2014.0-036-100 03042039 14,0 20,0 29,2 93,5 43,5 0,3 ✔ R335.14...14Z..
For cutter Insert key Insert screw Key (T-handle)
335.14-..06 H4B-T08P C92608-T08P DOUBLE-T

335.14-..08 H4B-T10P C93510-T10P DOUBLE-T
335.14-..09 H4B-T15P C94012-T15P DOUBLE-T
335.14-..12/14 H6B-T20P C95012-T20P DOUBLE-T
Annex
242
www.secotools.com
Thread milling
Shanks
335.14 Shank - Cylindrical version
Thread turning
MDT
• -E = Carbide shank with DMM tolerance = h6
• Steel shank: DMM tolerance = g6
• Max RPM = 30 000 rev/min
Through
Designation Item number DCSFWS DMM LF OAL LPR Weight coolant Insert
335.14-050006.0-083-315-E 03042121 0.236 0.500 0.689 3.012 1.240 0.220 ✔ R334.14...06Z..

335.14-050006.0-118-354-E 03042122 0.236 0.500 1.043 3.406 1.634 0.440 ✔ R334.14...06Z..
Mini-Shaft™
335.14-050006.0-165-394-E 03042107 0.236 0.500 1.516 3.799 2.028 0.440 ✔ R334.14...06Z..
335.14-050008.0-114-374-E 03042123 0.315 0.500 0.965 3.563 1.791 0.440 ✔ R334.14...08Z..
335.14-050008.0-165-433-E 03042124 0.315 0.500 1.476 4.154 2.382 0.440 ✔ R334.14...08Z..
335.14-050008.0-220-472-E 03042119 0.315 0.500 2.028 4.547 2.776 0.440 ✔ R334.14...08Z..
335.14-062509.0-071-315 03042108 0.354 0.625 0.480 2.921 1.031 0.220 ✔ R334.14...09Z..
335.14-062509.0-126-394-E 03042109 0.354 0.625 1.031 3.709 1.819 0.440 ✔ R334.14...09Z..
335.14-062509.0-177-433-E 03042110 0.354 0.625 1.543 4.102 2.213 0.440 ✔ R334.14...09Z..
335.14-062509.0-252-512-E 03042111 0.354 0.625 2.291 4.890 3.000 0.660 ✔ R334.14...09Z..
Thread milling
335.14-062512.0-094-315 03042112 0.472 0.625 0.720 2.925 1.035 0.220 ✔ R334.14...12Z..
335.14-062512.0-165-394-E 03042113 0.472 0.625 1.429 3.713 1.823 0.440 ✔ R334.14...12Z..
335.14-062512.0-236-512-E 03042114 0.472 0.625 2.138 4.894 3.004 0.660 ✔ R334.14...12Z..
335.14-062512.0-335-630-E 03042115 0.472 0.625 3.122 6.075 4.185 0.660 ✔ R334.14...12Z..
335.14-062514.0-165-394-E 03042116 0.551 0.625 1.398 3.681 1.791 0.440 ✔ R334.14...14Z..
335.14-062514.0-236-512-E 03042117 0.551 0.625 2.106 4.862 2.972 0.880 ✔ R334.14...14Z..
335.14-062514.0-335-630-E 03042118 0.551 0.625 3.091 6.043 4.154 0.880 ✔ R334.14...14Z..

Thread tapping
335.14-..06 H4B-T08P C92608-T08P DOUBLE-T

335.14-..08 H4B-T10P C93510-T10P DOUBLE-T
335.14-..09 H4B-T15P C94012-T15P DOUBLE-T
335.14-..12/14 H6B-T20P C95012-T20P DOUBLE-T
Annex
243
www.secotools.com
Thread milling
Shanks
335.14 Shank with ER collet

Thread turning
MDT

Through
Designation Item number DCSFWS BD2 LF OAL CTMS Weight coolant Insert
mm mm mm mm mm kg
335.14-ER11-06-016 03042072 6,0 16,0 12,5 34,9 ER 11 0,1 – R335.14...06Z..

335.14-ER11-08-016 03042085 8,0 16,0 11,5 33,8 ER 11 0,1 – R335.14...08Z..
335.14-ER11-09-022 03042073 9,0 16,0 16,2 38,5 ER 11 0,1 – R335.14...09Z..
335.14-ER16-08-022 03042086 8,0 32,0 17,5 49,6 ER 16 0,2 – R335.14...08Z..
Mini-Shaft™
335.14-ER16-09-022 03042074 9,0 32,0 16,2 48,3 ER 16 0,2 – R335.14...09Z..

335.14-ER16-12-030 03042076 12,0 32,0 24,3 56,4 ER 16 0,2 – R335.14...12Z..
335.14-ER25-09-022 03042075 9,0 35,0 16,2 55,3 ER 25 0,2 – R335.14...09Z..
335.14-ER25-12-030 03042078 12,0 35,0 24,3 63,4 ER 25 0,2 – R335.14...12Z..
335.14-ER25-14-019 03042080 14,0 35,0 12,5 52,3 ER 25 0,2 – R335.14...14Z..
335.14-ER25-14-035 03042081 14,0 35,0 28,5 67,6 ER 25 0,2 – R335.14...14Z..
335.14-ER32-12-030 03042079 12,0 50,0 24,3 69,4 ER 32 0,4 – R335.14...12Z..
335.14-ER32-14-019 03042082 14,0 50,0 12,5 58,3 ER 32 0,5 – R335.14...14Z..
Thread milling
335.14-ER32-14-035 03042083 14,0 50,0 28,5 73,6 ER 32 0,4 – R335.14...14Z..
335.14-ER..-06 H4B-T08P C92608-T08P DOUBLE-T

Thread tapping

335.14-ER..-12/14 H6B-T20P C95012-T20P DOUBLE-T
Annex
244
www.secotools.com
Thread milling
Heads
335.14 Inserts
Thread profile Whitworth - Metric
Thread turning
Grades
Designation Pitch DC RE DCSFMS HC LF PDX PNA ZEFP Coated
MDT
mm mm mm mm mm mm mm F32M
mm TPIX
11,7 0,31 6,0 1,48 3,6 1,6 55,0
R335.14-117WXF11.06Z3 – 11 3 [
0.461 0.012 0.236 0.058 0.142 0.063 2.165
11,7 0,24 6,0 1,16 3,6 1,3 55,0
R335.14-117WXF14.06Z3 – 14 3 [
0.461 0.009 0.236 0.046 0.142 0.051 2.165
11,7 0,18 6,0 0,86 3,6 1,1 55,0
R335.14-117WXF19.06Z3 – 19 3 [
0.461 0.007 0.236 0.034 0.142 0.043 2.165
15,7 0,24 8,0 1,17 4,6 1,5 55,0
R335.14-157WXF14.08Z3 – 14 3 [
0.618 0.009 0.315 0.046 0.181 0.059 2.165
Mini-Shaft™
17,7 0,31 9,0 1,48 5,85 1,45 55,0
R335.14-177WXF11.09Z3 – 11 3 [
0.697 0.012 0.354 0.058 0.230 0.057 2.165
17,7 0,24 9,0 1,16 5,85 1,25 55,0
R335.14-177WXF14.09Z3 – 14 3 [
0.697 0.009 0.354 0.046 0.230 0.049 2.165
17,7 0,18 9,0 0,856 5,85 0,95 55,0
R335.14-177WXF19.09Z3 – 19 3 [
0.697 0.007 0.354 0.034 0.230 0.037 2.165
[ Stock standard.
Thread milling
Thread tapping
Annex
245
www.secotools.com
Thread milling
Heads
335.14 Inserts
Thread profile Partial Metric
Thread turning

Grades
Designation Pitch DC CF DCSFMS HC LF PDX PNA ZEFP Coated

MDT
mm TPI
11,7 0.13 6,0 1,25 3,6 0,8 60,0
R335.14-117MNP100200.06Z3 1,0-2,0 0.039-0.079 3 [
0.461 0.005 0.236 0.049 0.142 0.031 2.362
11,7 0.25 6,0 1,78 3,6 1,2 60,0
R335.14-117MNP200300.06Z3 2,0-3,0 0.079-0.118 3 [
0.461 0.010 0.236 0.070 0.142 0.047 2.362
15,7 0.19 8,0 1,67 4,6 1,1 60,0
R335.14-157MNP150275.08Z3 1,5-2,75 0.059-0.108 3 [
0.618 0.007 0.315 0.066 0.181 0.043 2.362
15,7 0.31 8,0 1,78 4,6 1,2 60,0
R335.14-157MNP250300.08Z3 2,5-3,0 0.098-0.118 3 [
0.618 0.012 0.315 0.070 0.181 0.047 2.362
Mini-Shaft™
17,7 0.12 9,0 1,19 5,85 1,15 60,0

R335.14-177MNP100200.09Z3 1,0-2,0 0.039-0.079 3 [
0.697 0.005 0.354 0.047 0.230 0.045 2.362
17,7 0.19 9,0 1,62 5,85 1,25 60,0
R335.14-177MNP150275.09Z3 1,5-2,75 0.059-0.108 3 [
0.697 0.007 0.354 0.064 0.230 0.049 2.362
17,7 0.25 9,0 2,22 5,85 1,65 60,0
R335.14-177MNP200375.09Z3 2,0-3,75 0.079-0.148 3 [
0.697 0.010 0.354 0.087 0.230 0.065 2.362
17,7 0.38 9,0 3,25 5,85 2,25 60,0
R335.14-177MNP300550.09Z3 3,0-5,5 0.118-0.217 3 [
0.697 0.015 0.354 0.128 0.230 0.089 2.362
21,7 0.12 12,0 1,19 5,85 1,25 60,0
R335.14-217MNP100200.12Z3 1,0-2,0 0.039-0.079 3 [
0.854 0.005 0.472 0.047 0.230 0.049 2.362
Thread milling
21,7 0.25 12,0 2,22 5,85 1,65 60,0

R335.14-217MNP200375.12Z3 2,0-3,75 0.079-0.148 3 [
0.854 0.010 0.472 0.087 0.230 0.065 2.362
21,7 0.25 12,0 2,7 5,85 2,15 60,0
R335.14-217MNP250450.12Z3 2,5-4,5 0.098-0.177 3 [
0.854 0.010 0.472 0.106 0.230 0.085 2.362
21,7 0.44 12,0 3,84 5,85 2,65 60,0
R335.14-217MNP350600.12Z3 3,5-6,0 0.138-0.236 3 [
0.854 0.017 0.472 0.151 0.230 0.104 2.362
27,7 0.37 14,0 2,93 6,6 2,6 60,0
R335.14-277MNP250500.14Z3 2,5-5,0 0.098-0.197 3 [
1.091 0.015 0.551 0.115 0.260 0.102 2.362
27,7 0.5 14,0 4,6 6,6 3,0 60,0
R335.14-277MNP400600.14Z3 4,0-6,0 0.157-0.236 3 [
1.091 0.020 0.551 0.181 0.260 0.118 2.362
[ Stock standard.
Thread tapping
Annex
246
www.secotools.com
Thread milling
Heads
335.14 Inserts
Thread profile UN - Metric
Thread turning
Grades
Designation Pitch DC CF DCSFMS HC LF PDX PNA ZEFP Coated
MDT
mm TPIX
17,7 0,32 9,0 1,375 5,85 1,25 60,0
R335.14-177UNNF10.09Z3 – 10 3 [
0.697 0.013 0.354 0.054 0.230 0.049 2.362
17,7 0,29 9,0 1,249 5,85 1,05 60,0
R335.14-177UNNF11.09Z3 – 11 3 [
0.697 0.011 0.354 0.049 0.230 0.041 2.362
17,7 0,27 9,0 1,146 5,85 1,05 60,0
R335.14-177UNNF12.09Z3 – 12 3 [
0.697 0.011 0.354 0.045 0.230 0.041 2.362
17,7 0,23 9,0 0,982 5,85 0,85 60,0
R335.14-177UNNF14.09Z3 – 14 3 [
0.697 0.009 0.354 0.039 0.230 0.033 2.362
Mini-Shaft™
17,7 0,2 9,0 0,859 5,85 0,85 60,0
R335.14-177UNNF16.09Z3 – 16 3 [
0.697 0.008 0.354 0.034 0.230 0.033 2.362
17,7 0,18 9,0 0,763 5,85 0,85 60,0
R335.14-177UNNF18.09Z3 – 18 3 [
0.697 0.007 0.354 0.030 0.230 0.033 2.362
17,7 0,16 9,0 0,687 5,85 0,65 60,0
R335.14-177UNNF20.09Z3 – 20 3 [
0.697 0.006 0.354 0.027 0.230 0.026 2.362
17,7 0,13 9,0 0,572 5,85 0,65 60,0
R335.14-177UNNF24.09Z3 – 24 3 [
0.697 0.005 0.354 0.023 0.230 0.026 2.362
17,7 0,53 9,0 2,291 5,85 1,65 60,0
R335.14-177UNNF6.09Z3 – 6 3 [
0.697 0.021 0.354 0.090 0.230 0.065 2.362
Thread milling
17,7 0,4 9,0 1,718 5,85 1,45 60,0
R335.14-177UNNF8.09Z3 – 8 3 [
0.697 0.016 0.354 0.068 0.230 0.057 2.362
[ Stock standard.
Thread tapping
Annex
247
www.secotools.com
Thread tapping Threadmaster™
Thread turning
MDT
Mini-Shaft™
Designed to be universal in application, the high-speed steel Threadmaster Tap effectively threads holes in a wide
range of workpiece types and materials. The tool features an advanced coating technology that enables it to achieve
higher cutting data and output in steel up to 350 HB, stainless steels and cast irons when compared to the uncoated
Thread milling
solutions typically found in this product area.
■ Features spiral helixes for blind holes and spiral points for through holes.
■ Straight flutes accommodate for short chipping materials.
■ Advanced coatings for faster tapping.
Thread tapping
Annex
248
www.secotools.com
Introduction to taps
What are you looking for in a thread?
Thread turning
Cutting a thread vs forming a thread
There are two way of making a thread, cutting or

forming. Cutting is to be used in most materials, while
forming is to be used in steel, stainless steel and
aluminium.
MDT
Through hole, blind hole
Mini-Shaft™
Taps have different designs. Depending on application
(through or blind hole).
Thread milling
Hole size
Dimension of the hole differs between cutting and form- Cutting tap Forming tap
ing the thread. D = TD-PTH D = TD-PTH/2
(D = Dnom - 0.0068 x PTH x 65)
Thread tapping
D = Hole diameter
TD = Major thread diameter
PTH = Thread pitch
Annex
249
www.secotools.com
Introduction to taps – Tool guide

Thread turning
Drilling
MDT
∅ 0,1 - 20 mm ∅ 9,52 - 26 mm ∅ 15 - 85 mm
∅ 0.004-0.787” ∅ 0.375-1.024” ∅ 0.591-3.346”
IT 7/9 IT 9/10 IT 12
Rough boring
Mini-Shaft™
∅ 18 - 206 mm
∅ 0.709-8.110”
IT 9/10
Thread milling
Threadmaster™ Taps Straight flute

Threadmaster™ Taps Helix point
Thread tapping
Threadmaster™ Taps Helix flute
Threadmaster™ FormTap
Thread tapping
Annex
250
www.secotools.com
Taps – Choice of Tap tolerance

The Threadmaster™ Taps from Seco are available for threads with different tolerences 6H and 6G, as well in 6HX and 6GX.
Thread turning
Normal standard tolerance is H.
Tolerance GX/HX and BX is to be used when risk of oversize is limited, this also increases tool life of the tap.
Taps for UNC/UNF are designed for tolerance 2B.
Tolerance class for G and NPT/NPTF is normal.
MDT
4H
4H, ISO1
4HX
Thread tolerance
6H
6H, ISO2
Tolerance of the tap
6HX
Tolerance of the tap manufacturer choice
Mini-Shaft™
Tolerance of No-Go-gauge
6G Tolerance of Go-gauge
6G, ISO3
6GX
6
Metric threads
Thread milling
3B
3B, ISO1
3BX
Thread tolerance
2B
2B, ISO2 Tolerance of the tap
2BX
Tolerance of the tap manufacturer choice
Thread tapping
Tolerance of No-Go-gauge
1B
Tolerance of Go-gauge
1B, ISO3
UN threads
Annex
251
www.secotools.com
Code key – Taps T34, T33 and T32
T34 A - R 45 H 01 C 03 - 6 X 1 - 65 R
Thread turning
1 2 3 4 5 6 7 8 9 10 11 12
No. 3, 4
R40/R45 P S F/FS - forming taps

Blind holes Through holes Blind and through holes Blind and through holes
ULDR = 2,5 ULDR = 3 ULDR = 1,5 ULDR = 3
ULDR = Usable length diameter ratio

MDT
Description
T34 – High performance versatile cutting taps

1 Family T33 – Forming taps
T32 – Versatile cutting taps
[Blank] – Without coolant

2 Internal coolant A – Axial
B – Radial
Mini-Shaft™
P – Helix Point L – Left hand flute

3 Design S – Straight Flutes F – Forming tap
R – Right hand spiral flutes FS – Forming tap with oil grooves
40
4 Flute angle
45
Used for Design R and L
C – TiN + TiCN
5 Coating H – TiAlN + WC/C
N – TiAlN + TiN
Thread milling
01 – M 09 – UNF
02 – MF 16 – EGUNC - taps for Helicoil/STI threads
6 Thread Type
04 – EGM - taps for Helicoil/STI threads 17 – EGUNF - taps for Helicoil/STI threads
08 – UNC 21 – G
B = Cutting chamfer 3,5-5 threads
7 Type of chamfer C = Cutting chamfer 2-3 threads
E = Cutting chamfer 1,5-2 threads
03 – DIN371 - with reinforced shank 06 – DIN376 - reduced shank (for coarse threads)
8 Standard 04 – DIN371/EL - extra-long with reinforced shank 07 – DIN376/EL - extra-long with reduced shank
05 – DIN374 - reduced shank (for fine threads) 09 – DIN5156 - reduced shank (for pipe threads)
Thread tapping
9 Thread size
10 Pitch
M threads: For UNC and UNF threads For G threads:

41 – 4H 21 – 2B 11 – Normal
61 – 6G 22 – 2BX 12 – Normal X
11 Tolerance 62 – 6GX
63 – 6H
64 – 6H mod (for EG M)
65 – 6HX
Annex
R - Right
12 Hand
L - Left
252
www.secotools.com
Code key – Taps MTH, MTS, MF and MTP
Thread turning
MTS - M10 X 1.5ISO 6H - B C - V 0 01 - A
1 2 3 4 5 6 7 8 9 10
No. 1
MTH MTP MTS MF
MDT
Description
MTH = Threadmaster™ Tap Helix flute
MTP = Threadmaster™ Tap Helix point
1 MTS = Threadmaster™ Tap Straight flute tap
MF = Threadmaster™ FormTap
2 Thread type and size
3 Pitch and thread form
4 Tolerance (tctr) 4H, 6H, 6HX, 6G, 6GX metric and 2B, 2BX, 3B, 3BX, Normal, NormalX inch
Mini-Shaft™
Operation
B = Blind hole
5 T = Through hole
X = Blind and Through hole
Entering Chamfer(THCHT)
B = Entering chamfer 3,5 - 5 threads
6 C = Entering chamfer 2 - 3 threads
E = Entering chamfer 1,5 - 2 threads
V = Versatile
P = Steel
M = Stainless Steel
7
Thread milling
K = Cast Iron
N = Non ferrous metals
S = Superalloys and titanium
8 Release No. = 0 ( 2014 )
9 Tool type No. = 01, 02, 03, 04 etc
10 A = Through coolant
Thread tapping
Annex
253
www.secotools.com
Taps – Entering chamfer THCHT

Thread turning
B-type
Length 3.5 – 5 threads
Low load
Best surface finish
Thin chip thickness
Low pressure at the chamfer
Long tool life
Most common for through holes (Helix point)
C-type
Length 2 - 3 threads
Medium load
MDT
Good surface finish

Normal chip thickness
Normal pressure at the chamfer
Normal tool life
Most common design
Standard for blind holes
E-type
Length 1.5 – 2 threads
High load
Mini-Shaft™
Good surface finish

Thick chip thickness
High pressure at the chamfer
Shorter tool life
When limited space in the bottom of a hole
Thread milling
Thread tapping
Annex
254
www.secotools.com
Definitions for T32, T33 and T34

LF
Thread turning
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
Definitions Seco Threadmaster™
BSG = Basic standard group
TD = Thread diameter
TDZ = Thread diameter size
THCHT = Threading chamfer type
TCL = Thread chamfer length
Mini-Shaft™
THL = Thread length
LU = Usable length
LF = Functional length
OAL = Overall length
FHA = Flute Helix angle
DCONS = Connection diameter machine side
Thread milling
CZCMS = Connection size code machine side
NOF = Flute count
PHDR = Recommended premachined hole diameter
PHDX = Maximum premachined hole diameter
TCTR = Thread tolerance class
ULDR = Usable length diameter ratio Thread tapping

Annex
255
www.secotools.com
Definitions for -P, -M, -K, -N, -S, -V and MF

Thread turning
Definitions Seco Threadmaster™
BSG = Basic standard group

MDT
CZC = Connection size code
DMM = Shank diameter
FHA = Flute helix angle
LF = Functional length
LU = Usable length
NOF = Number of flutes

Mini-Shaft™
PHDR = Recommended premachined hole diameter
PHDX = Maximum premachined hole diameter
TCTR = Thread tolerance class
TD = Thread diameter
TDZ = Thread diameter size
THCHT = Thread chamfer type
THFT = Thread form type ISO, Withworth, UN...

Thread milling
THLGTH = Thread length
TPIX = Threads per inch maximum
TTP = Thread type internal/external/both
TPX = Thread pitch maximum
ULDR = Usable length diameter ratio

Thread tapping
Annex
256
www.secotools.com
Taps - Choice of toolholder

The tool holder choice is made according to the machine spindle, with or without synchronization.
Thread turning
Modern CNC machine with synchronization: TCER Tapping chucks with micro-compensation, for synchronized
tapping:
The modern CNC machines can synchronize the spindle feed rate
and rotation in order to make a rigid tapping operation. The TCER TCER for synchronized tapping has a micro-compensation system
– tapping chucks with micro-compensation is the most suitable for to avoid the small discrepancies and axial forces during rigid tapping
synchronized tapping. machining. The taps are mounted in specific ER collets with square
drive.
Note: These ER collets with square drive can also be mounted in ER

collet chucks, but then without micro-compensation.
MDT
Mini-Shaft™
Thread milling
TCER
Thread tapping
Annex
257
www.secotools.com
Troubleshooting
Thread turning
Oversized thread Undersized thread
Wrong tap for application Tap worn out

- Refer to application charts - Replace tap
Incorrect axial feed Tap drill hole too small
- Ensure feed rate is controlled - Check drilling recommendations
- If possible, use tool holder for syncronized tapping Material closing after tapping
Wrong cutting speed - Increase drill diameter
- Refer to recommendations Wrong tolerance on tap
Wrong tolerance - Choose tap with higher tolerance
- Choose tap with lower tolerance
MDT
Chipping Breakage
Wrong tap for the application Too high torque

- Check for tool selection - Use tap holder with torque settings
Mini-Shaft™
Incorrect or lack of lubricant Tap worn out

- Use appropriate emulsion or oil - Replace tap
Tap hitting bottom of hole Incorrect or lack of lubricant
- Increase drill depth or reduce thread depth - Use appropriate emulsion or oil
Trapped chip Tap hitting bottom of hole
- Check tool selection - Increase drill depth or reduce thread depth
Surface hardening in drilled hole Wrong cutting speed
- Check drilling recommendations - Refer to recommendations
“Birdnest” around tool
- Check tool selection
Tap drill hole too small
- Check drilling recommendations
Thread milling
Rapid wear Built-up edge
Wrong type of tap for application Incorrect or lack of lubricant

- Refer to tap choice - Use appropriate emulsion or oil
Incorrect or lack of lubricant Tap worn out
- Use appropriate emulsion or oil - Replace tap
Too high cutting speed Wrong cutting speed
- Refer to recommendations - Refer to recommendations
Thread tapping
Work (surface) hardening in drilled hole Wrong type of tap for application
- Check drilling recommendations - Refer to tap choice
- Drill worn out
Tap drill hole too small
- Check drilling recommendations
Annex
258
www.secotools.com
Thread tapping
Taps Selection T32
Thread turning
Type of tap T32-SNC-micro T32-SNC T32-PNB-micro T32-PNB T32-PNB T32-R40NC-micro T32-R40NC T32-R40NC
TDZ < M3 TDZ < M3 TDZ < M3
MDT
Mini-Shaft™
Type of hole
Chamfer form C C B B B C C C
Coolant External External External External External External External External
Substrate: HSS-PM HSSE HSSE HSSE HSSE HSS-PM HSSE HSSE
Thread milling
ULDR 1,5 1,5 3 3 3 2,5 2,5 2,5
FHA – – – – – 40° 40° 40°
M 287, 288 289, 290, 291 298, 299 300, 301, 302 303, 304 317, 318 319, 320, 321 322, 323
M 6G 305, 306 324, 325
M LH 292, 293 307, 308 326, 327
MF 294, 295, 296 309, 310, 311 328, 329, 330
UNC 312, 313 331, 332
Page(s)
UNF 314, 315 333, 334 Thread tapping
G 297 316 335

EG M
EG UNC
EG UNF
For cutting data, see next page

Annex
259
www.secotools.com
Thread tapping
Cutting data T32
vc
SMG
Thread turning
T32-SNC-micro T32-SNC T32-PNB-micro T32-PNB T32-R40NC-micro T32-R40NC

20 20 20 20 20 20
P1
65 65 65 65 65 65
20 20 20 20 20 20
P2
65 65 65 65 65 65
17 17 17 17 17 17
P3
55 55 55 55 55 55
15 15 15 15 15 15
P4
49 49 49 49 49 49
14 14 14 14 14 14
P5
46 46 46 46 46 46
16 16 16 16 16 16
P6
50 50 50 50 50 50
15 15 15 15 15 15
P7
49 49 49 49 49 49
MDT
14 14 14 14 14 14
P8
46 46 46 46 46 46
15 15 15 15 15 15
P11
49 49 49 49 49 49
8,7 8,7 8,7 8,7 8,7 8,7
P12
29 29 29 29 29 29
12 12 12 12 12 12
M1
39 39 39 39 39 39
10 10 10 10 10 10
M2
33 33 33 33 33 33
7,6 7,6 7,6 7,6 7,6 7,6
M3
25 25 25 25 25 25
Mini-Shaft™
5,7 5,7 5,7 5,7 5,7 5,7

M4
19 19 19 19 19 19
4,8 4,8 4,8 4,8 4,8 4,8
M5
16 16 16 16 16 16
17 17 17 17 — —
K1
55 55 55 55 — —
15 15 15 15 — —
K2
49 49 49 49 — —
13 13 13 13 13 13
K3
43 43 43 43 43 43
12 12 12 12 12 12
K4
39 39 39 39 39 39
— — — — — —
K5
Thread milling
— — — — — —
— — — — — —
K6
— — — — — —
— — — — — —
K7
— — — — — —
23 23 23 23 23 23
N1
75 75 75 75 75 75
15 15 15 15 15 15
N2
49 49 49 49 49 49
10 10 10 10 10 10
N3
33 33 33 33 33 33
13 13 13 13 13 13
N11
43 43 43 43 43 43
— — — — — —
Thread tapping
S1
— — — — — —
— — — — — —
S2
— — — — — —
— — — — — —
S3
— — — — — —
— — — — — —
S11
— — — — — —
— — — — — —
S12
— — — — — —
— — — — — —
S13
— — — — — —
SMG = Seco material group
vc = m/min (sf/min)
Annex
For more detailed information on cuttingdata, please visit MyPages or Seco Suggest on secotools.com
260
www.secotools.com
Thread tapping
Taps Selection T34
Thread turning
T34-PHB-
Type of tap T34-PHB T34B-PHB T34-R45HC-micro T34-R45HC T34A-R45HC T34-R45HE T34A-R45HE
micro
TDZ < M3 TDZ < M3
MDT
Mini-Shaft™
Type of hole
Chamfer form B B B C C C E E
Coolant External External Internal External External Internal External Internal
Substrate: HSS-PM HSSE-PM HSSE-PM HSS-PM HSSE-PM HSSE-PM HSSE-PM HSSE-PM
ULDR 3 3 3 2,5 2,5 2,5 2,5 2,5
FHA – – – 45° 45° 45° 45° 45°
Thread milling
M 336, 337 338, 339 340, 341 357, 358 359, 360 363, 364 361, 362
M 6G
M LH
MF 342, 343 344, 345 365, 366 369, 370 367, 368 371
UNC 346, 347 372, 373
Page(s)
UNF 348, 349 374, 375
G 350 376
EG M 351, 352 377, 378 Thread tapping
EG UNC 353, 354 379, 380

EG UNF 355, 356 381, 382

Annex
261
www.secotools.com
Thread tapping
Cutting data T34
vc
SMG
Thread turning
T34-PHB-micro T34-PHB T34B-PHB T34-R45HC-micro T34-R45HC T34A-R45HC T34-R45HE T34A-R45HE

28 28 43 28 28 43 28 43
P1
90 90 140 90 90 140 90 140
28 28 41 28 28 41 28 41
P2
90 90 135 90 90 135 90 135
24 24 36 24 24 36 24 36
P3
80 80 120 80 80 120 80 120
21 21 31 21 21 31 21 31
P4
70 70 100 70 70 100 70 100
20 20 30 20 20 30 20 30
P5
65 65 100 65 65 100 65 100
22 22 34 22 22 34 22 34
P6
70 70 110 70 70 110 70 110
21 21 32 21 21 32 21 32
P7
70 70 105 70 70 105 70 105
MDT
20 20 30 20 20 30 20 30
P8
65 65 100 65 65 100 65 100
21 21 31 21 21 31 21 31
P11
70 70 100 70 70 100 70 100
12 12 18 12 12 18 12 18
P12
39 39 60 39 39 60 39 60
15 15 21 15 15 21 15 21
M1
49 49 70 49 49 70 49 70
12 12 17 12 12 17 12 17
M2
39 39 55 39 39 55 39 55
9,1 9,1 13 9,1 9,1 13 9,1 13
M3
30 30 43 30 30 43 30 43
Mini-Shaft™
6,9 6,9 9,7 6,9 6,9 9,7 6,9 9,7

M4
23 23 32 23 23 32 23 32
5,7 5,7 8,1 5,7 5,7 8,1 5,7 8,1
M5
19 19 27 19 19 27 19 27
24 24 36 24 24 36 24 36
K1
80 80 120 80 80 120 80 120
21 21 31 21 21 31 21 31
K2
70 70 100 70 70 100 70 100
18 18 26 18 18 26 18 26
K3
60 60 85 60 60 85 60 85
17 17 25 17 17 25 17 25
K4
55 55 80 55 55 80 55 80
— 10 15 — 10 15 10 15
K5
Thread milling
— 33 49 — 33 49 33 49
15 15 22 15 15 22 15 22
K6
49 49 70 49 49 70 49 70
13 13 19 13 13 19 13 19
K7
43 43 60 43 43 60 43 60
26 26 39 26 26 39 26 39
N1
85 85 130 85 85 130 85 130
17 17 25 17 17 25 17 25
N2
55 55 80 55 55 80 55 80
11 11 17 11 11 17 11 17
N3
36 36 55 36 36 55 36 55
15 15 22 15 15 22 15 22
N11
49 49 70 49 49 70 49 70
— 4,0 4,0 — 4,0 4,0 4,0 4,0
Thread tapping
S1
— 13 13 — 13 13 13 13
— — — — — — — —
S2
— — — — — — — —
— — — — — — — —
S3
— — — — — — — —
— 4,0 4,0 — 4,0 4,0 4,0 4,0
S11
— 13 13 — 13 13 13 13
— — — — — — — —
S12
— — — — — — — —
— — — — — — — —
S13
— — — — — — — —
vc = m/min (sf/min)
Annex
262
www.secotools.com
Thread tapping
Taps Selection T33
Thread turning
Type of tap T33-FNC T33-FSNC T33-FSCC T33-FSCE T33B-FSCE/FSCC T33A-FSCE
MDT
Mini-Shaft™
Type of hole
Chamfer form C C C E E/C E

Coolant External External External External Internal Internal
Substrate: HSSE-PM HSSE-PM HSSE-PM HSSE-PM HSSE-PM HSSE-PM
Thread milling
ULDR 3 3 3 3 3 3
M 383, 384 385, 386 396 397 399, 400 398
M 6G 387, 388
M LH
MF 389, 390 401, 402 403
UNC 391, 392
Page(s)
UNF 393, 394
G 395 Thread tapping
EG M
EG UNC
EG UNF

Annex
263
www.secotools.com
Thread tapping
Cutting data T33
vc
SMG
Thread turning
T33-FNC T33-FSNC T33-FSCC T33-FSCE T33A-FSCE T33B-FSCE/FSCC

21 21 21 21 28 28
P1
70 70 70 70 90 90
21 21 21 21 28 28
P2
70 70 70 70 90 90
18 18 18 18 24 24
P3
60 60 60 60 80 80
16 16 16 16 21 21
P4
50 50 50 50 70 70
15 15 15 15 20 20
P5
49 49 49 49 65 65
17 17 17 17 22 22
P6
55 55 55 55 70 70
16 16 16 16 21 21
P7
50 50 50 50 70 70
MDT
— — — — — —
P8
— — — — — —
— — — — — —
P11
— — — — — —
— — — — — —
P12
— — — — — —
19 19 19 19 19 19
M1
60 60 60 60 60 60
15 15 15 15 15 15
M2
49 49 49 49 49 49
11 11 11 11 11 11
M3
36 36 36 36 36 36
Mini-Shaft™
— — 8,6 8,6 8,6 8,6

M4
— — 28 28 28 28
— — — — — —
M5
— — — — — —
— — — — — —
K1
— — — — — —
— — — — — —
K2
— — — — — —
— — — — — —
K3
— — — — — —
— — — — — —
K4
— — — — — —
— — — — — —
K5
Thread milling
— — — — — —
— — — — — —
K6
— — — — — —
— — — — — —
K7
— — — — — —
31 31 47 47 47 47
N1
100 100 155 155 155 155
20 20 30 30 30 30
N2
65 65 100 100 100 100
— — 20 20 20 20
N3
— — 65 65 65 65
— — 27 27 27 27
N11
— — 90 90 90 90
— — — — — —
Thread tapping
S1
— — — — — —
— — — — — —
S2
— — — — — —
— — — — — —
S3
— — — — — —
— — — — — —
S11
— — — — — —
— — — — — —
S12
— — — — — —
— — — — — —
S13
— — — — — —
vc = m/min (sf/min)
Annex
264
www.secotools.com
Thread tapping
Taps Selection MTH-P001 (-A) – MTH-P011
Thread turning
MTH-P001 MTH-P001-A MTH-P002 MTH-P002-A
Tool type MTH-P003 MTH-P003-A MTH-P004 MTH-P004-A MTH-P011
30-48 HRC 30-48 HRC 30-48 HRC 30-48 HRC
Thread type M M M M M M M M MF
TCTR 6H 6H 6H 6H 6HX 6HX 6HX 6HX 6HX
ULDR 1.5 1.5 1.5 1.5 3 3 3 3 3
THCHT C C C C C C C C C
BSG SECO-DIN SECO-DIN DIN376 DIN376 DIN371 DIN371 DIN376 DIN376 DIN374
MF 4X0.5 -
MDT
Thread size M3 - M10 M4 - M10 M12 - M20 M12 - M20 M1.6 - M10 M4 - M10 M5 - M30 M12 - M30
MF 30X2.0
FHA 15° 15° 15° 15° 48° 48° 48° 48° 48°
Mini-Shaft™
Thread milling
Coolant No Yes No Yes No Yes No Yes No
Page(s) 427 428 429 430 431 432 433 434 435, 436

Thread tapping
Annex
265
www.secotools.com
Thread tapping
Cutting data MTH-P001 (-A) – P011
vc
SMG
Thread turning
MTH- P001 MTH- P001-A MTH- P002 MTH- P002-A MTH- P003 MTH- P003-A MTH- P004 MTH- P004-A MTH- P011
— — — — 55 55 55 55 55
P1
— — — — 180 180 180 180 180
— — — — 55 55 55 55 55
P2
— — — — 180 180 180 180 180
— — — — 45 45 45 45 45
P3
— — — — 150 150 150 150 150
— — — — 40 40 40 40 40
P4
— — — — 130 130 130 130 130
— — — — 38 38 38 38 38
P5
— — — — 125 125 125 125 125
— — — — 43 43 43 43 43
P6
— — — — 140 140 140 140 140
— — — — 40 40 40 40 40
P7
— — — — 130 130 130 130 130
MDT
— — — — 38 38 38 38 38
P8
— — — — 125 125 125 125 125
— — — — 39 39 39 39 39
P11
— — — — 130 130 130 130 130
— — — — 23 23 23 23 23
P12
— — — — 75 75 75 75 75
— — — — — — — — —
M1
— — — — — — — — —
— — — — — — — — —
M2
— — — — — — — — —
— — — — — — — — —
M3
— — — — — — — — —
Mini-Shaft™
— — — — — — — — —
M4
— — — — — — — — —
— — — — — — — — —
M5
— — — — — — — — —
— — — — — — — — —
K1
— — — — — — — — —
— — — — — — — — —
K2
— — — — — — — — —
— — — — — — — — —
K3
— — — — — — — — —
— — — — — — — — —
K4
— — — — — — — — —
— — — — — — — — —
K5
Thread milling
— — — — — — — — —
— — — — — — — — —
K6
— — — — — — — — —
— — — — — — — — —
K7
— — — — — — — — —
— — — — — — — — —
N1
— — — — — — — — —
— — — — — — — — —
N2
— — — — — — — — —
— — — — — — — — —
N3
— — — — — — — — —
— — — — — — — — —
N11
— — — — — — — — —
17 17 17 17 — — — — —
Thread tapping
H5
55 55 55 55 — — — — —
17 17 17 17 — — — — —
H8
55 55 55 55 — — — — —
SMG = Seco material group, vc = m/min (sf/min)
Cutting speeds (vc) in the table are recommendations for a start value and calculated when running in 2xD, except for V048, V050 and MTH-S (001, 002, 003, 004, 011, 012, 031, 032, 041, 042 and 044)
that are calculated from 1,5xD.
When running in 1,5xD increse speed by 20% and at 2,5 x D reduce speed by 20%. At 3 x D reduce by 30%. Due to machine, material and setup condition it is advisable also to optimize cutting data.
Recommended ranges to use for each type of tap: K001-K002: +25% / -25%, V015-V016: +15% / -15%, V001-V045: +15% / -15%, V048-V050: +35% / -35%, V053-V063: +15% / -15%
Annex
266
www.secotools.com
Thread tapping
Taps Selection MTP-P001 – MTP-P011
Thread turning
MTP-P001 MTP-P002
Tool type MTP-P003 MTP-P003-A MTP-P004 MTP-P004-A MTP-P011
30-48 HRC 30-48 HRC
Thread type M M M M M M MF
TCTR 6H 6H 5HX/6HX 6HX 6HX 6HX 6HX
ULDR 2.5 2.5 3 3 3 3 3
THCHT B B B B B B B
BSG SECO-DIN DIN376 DIN371 DIN371 DIN376 DIN376 DIN374
MF 4X0.5 -
MDT
Thread size M3 - M10 M12 - M20 M1 - M10 M4 - M10 M4 - M30 M12 - M30
MF 30X2.0
Mini-Shaft™
Thread milling
Coolant No No No Yes No Yes No
Page(s) 405 406 407 408 409 410 411, 412

Thread tapping
Annex
267
www.secotools.com
Thread tapping
Cutting data MTP-P001 – P011
vc
SMG
Thread turning
MTP- P001 MTP- P002 MTP- P003 MTP- P003-A MTP- P004 MTP- P004-A MTP- P011
— — 60 60 60 60 60
P1
— — 195 195 195 195 195
— — 60 60 60 60 60
P2
— — 195 195 195 195 195
— — 50 50 50 50 50
P3
— — 165 165 165 165 165
— — 45 45 45 45 45
P4
— — 150 150 150 150 150
— — 43 43 43 43 43
P5
— — 140 140 140 140 140
— — 48 48 48 48 48
P6
— — 155 155 155 155 155
— — 46 46 46 46 46
P7
— — 150 150 150 150 150
MDT
— — 43 43 43 43 43
P8
— — 140 140 140 140 140
— — 44 44 44 44 44
P11
— — 145 145 145 145 145
— — 26 26 26 26 26
P12
— — 85 85 85 85 85
— — — — — — —
M1
— — — — — — —
— — — — — — —
M2
— — — — — — —
— — — — — — —
M3
— — — — — — —
Mini-Shaft™
— — — — — — —
M4
— — — — — — —
— — — — — — —
M5
— — — — — — —
— — — — — — —
K1
— — — — — — —
— — — — — — —
K2
— — — — — — —
— — — — — — —
K3
— — — — — — —
— — — — — — —
K4
— — — — — — —
— — — — — — —
K5
Thread milling
— — — — — — —
— — — — — — —
K6
— — — — — — —
— — — — — — —
K7
— — — — — — —
— — — — — — —
N1
— — — — — — —
— — — — — — —
N2
— — — — — — —
— — — — — — —
N3
— — — — — — —
— — — — — — —
N11
— — — — — — —
17 17 — — — — —
Thread tapping
H5
55 55 — — — — —
17 17 — — — — —
H8
55 55 — — — — —
Annex
268
www.secotools.com
Thread tapping
Taps Selection MTH-M003 (-A) – MTP-M004 (-A)
Thread turning
Tool type MTH-M003 MTH-M003-A MTH-M004 MTH-M004-A MTP-M003-A MTP-M004 MTP-M004-A
Thread type M M M M M M M
TCTR 6H 6H 6H 6H 6H 6H 6H
ULDR 2.5 2.5 2.5 2.5 2.5 2.5 2.5
THCHT C C C C B B B
BSG DIN371 DIN371 DIN376 DIN376 DIN371 DIN376 DIN376
MDT
Thread size M1.6 - M10 M4 - M10 M12 - M20 M12 - M20 M4 - M10 M12 - M20 M12 - M24
FHA 48° 48° 48° 48° – – –
Mini-Shaft™
Thread milling
Coolant No Yes No Yes Yes No Yes
Page(s) 437 438 439 440 413 414 415

Thread tapping
Annex
269
www.secotools.com
Thread tapping
Cutting data MTH-M003 (-A) – M004 (-A)
vc
SMG
Thread turning
MTH- M003 MTH- M003-A MTH- M004 MTH- M004-A MTP- M003-A MTP- M004 MTP- M004-A
— — — — — — —
P1
— — — — — — —
— — — — — — —
P2
— — — — — — —
— — — — — — —
P3
— — — — — — —
— — — — — — —
P4
— — — — — — —
— — — — — — —
P5
— — — — — — —
— — — — — — —
P6
— — — — — — —
— — — — — — —
P7
— — — — — — —
MDT
— — — — — — —
P8
— — — — — — —
— — — — — — —
P11
— — — — — — —
— — — — — — —
P12
— — — — — — —
12 12 12 12 12 12 12
M1
39 39 39 39 39 39 39
10 10 10 10 10 10 10
M2
33 33 33 33 33 33 33
8 8 8 8 8 8 8
M3
26 26 26 26 26 26 26
Mini-Shaft™
6 6 6 6 6 6 6
M4
20 20 20 20 20 20 20
5 5 5 5 5 5 5
M5
16 16 16 16 16 16 16
— — — — — — —
K1
— — — — — — —
— — — — — — —
K2
— — — — — — —
— — — — — — —
K3
— — — — — — —
— — — — — — —
K4
— — — — — — —
— — — — — — —
K5
Thread milling
— — — — — — —
— — — — — — —
K6
— — — — — — —
— — — — — — —
K7
— — — — — — —
— — — — — — —
N1
— — — — — — —
— — — — — — —
N2
— — — — — — —
— — — — — — —
N3
— — — — — — —
— — — — — — —
N11
— — — — — — —
— — — — — — —
Thread tapping
H5
— — — — — — —
— — — — — — —
H8
— — — — — — —
Annex
270
www.secotools.com
Thread tapping
Taps Selection MTH-N001 – MTP-N002 (-A)
Thread turning
Tool type MTH-N001 MTH-N002 MTP-N001 MTP-N001-A MTP-N002 MTP-N002-A
Thread type M M M M M M
TCTR 6H 6H 6H 6H 6H 6H
ULDR 1.5 1.5 3 3 3 3
THCHT C C B B B B
BSG DIN371 DIN376 DIN371 DIN371 DIN376 DIN376
MDT
FHA 15° 15° – – – –
Mini-Shaft™
Thread milling
Coolant No No No Yes No Yes
Page(s) 441 442 416 417 418 419

Thread tapping
Annex
271
www.secotools.com
Thread tapping
Cutting data MTH-N001 – N002 (-A)
vc
SMG
Thread turning
MTH- N001 MTH- N002 MTP- N001 MTP- N001-A MTP- N002 MTP- N002-A
— — — — — —
P1
— — — — — —
— — — — — —
P2
— — — — — —
— — — — — —
P3
— — — — — —
— — — — — —
P4
— — — — — —
— — — — — —
P5
— — — — — —
— — — — — —
P6
— — — — — —
— — — — — —
P7
— — — — — —
MDT
— — — — — —
P8
— — — — — —
— — — — — —
P11
— — — — — —
— — — — — —
P12
— — — — — —
— — — — — —
M1
— — — — — —
— — — — — —
M2
— — — — — —
— — — — — —
M3
— — — — — —
Mini-Shaft™
— — — — — —
M4
— — — — — —
— — — — — —
M5
— — — — — —
— — — — — —
K1
— — — — — —
— — — — — —
K2
— — — — — —
— — — — — —
K3
— — — — — —
— — — — — —
K4
— — — — — —
— — — — — —
K5
Thread milling
— — — — — —
— — — — — —
K6
— — — — — —
— — — — — —
K7
— — — — — —
55 55 55 55 55 55
N1
180 180 180 180 180 180
35 35 35 35 35 35
N2
115 115 115 115 115 115
23 23 23 23 23 23
N3
75 75 75 75 75 75
31 31 31 31 31 31
N11
100 100 100 100 100 100
— — — — — —
Thread tapping
H5
— — — — — —
— — — — — —
H8
— — — — — —
Annex
272
www.secotools.com
Thread tapping
Taps Selection MTH-S001 – MTH-S032
Thread turning
Tool type MTH-S001 MTH-S002 MTH-S003 MTH-S004 MTH-S011 MTH-S012 MTH-S031 MTH-S032
Thread type M M M M MF MJ UNC UNJC
TCTR 6HX 6HX 6HX 6HX 6HX 4H 2B 3B
ULDR 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
THCHT C C C C C C C C
BSG DIN371 DIN371 DIN371 DIN371 DIN371 DIN371 DIN2184-1 DIN2184-1
UNC2-56- UNJC4-40-
MDT
Thread size M3-M10 M12-M16 M3-M10 M12-M16 MF8X1-MF12X1,5 MJ3-MJ6
UNC3/8-16 UNJC3/8-16
FHA 10° 10° 10° 10° 10° 10° 25° 10°
Mini-Shaft™
Thread milling
Coolant No No No No No No No No
Page(s) 443 444 445 446 447 448 449 450

Thread tapping
Annex
273
www.secotools.com
Thread tapping
Cutting data MTH-S001 – S032
vc
SMG
Thread turning
MTH-S001 MTH-S002 MTH-S003 MTH-S004 MTH-S011 MTH-S012 MTH-S031 MTH-S032

— — — — — — — —
P1
— — — — — — — —
— — — — — — — —
P2
— — — — — — — —
— — — — — — — —
P3
— — — — — — — —
— — — — — — — —
P4
— — — — — — — —
— — — — — — — —
P5
— — — — — — — —
3 3 7 7 3 3 3 3
P6
10 10 23 23 10 10 10 10
3 3 7 7 3 3 3 3
P7
10 10 23 23 10 10 10 10
MDT
— — — — — — — —
P8
— — — — — — — —
3 3 6 6 3 3 3 3
P11
10 10 20 20 10 10 10 10
2 2 4 4 2 2 2 2
P12
7 7 13 13 7 7 7 7
— — — — — — — —
M1
— — — — — — — —
— — — — — — — —
M2
— — — — — — — —
— — — — — — — —
M3
— — — — — — — —
Mini-Shaft™
— — — — — — 2 —
M4
— — — — — — 7 —
— — — — — — 2 —
M5
— — — — — — 7 —
— — — — — — — —
K1
— — — — — — — —
— — — — — — — —
K2
— — — — — — — —
— — — — — — — —
K3
— — — — — — — —
— — — — — — — —
K4
— — — — — — — —
— — — — — — — —
K5
Thread milling
— — — — — — — —
— — — — — — — —
K6
— — — — — — — —
— — — — — — — —
K7
— — — — — — — —
— — — — — — — —
N1
— — — — — — — —
— — — — — — — —
N2
— — — — — — — —
16 16 25 25 16 16 — 16
N3
50 50 80 80 50 50 — 50
— — — — — — — —
N11
— — — — — — — —
2 2 4 4 2 2 2 2
Thread tapping
S1
7 7 13 13 7 7 7 7
2 2 3 3 2 2 2 2
S2
7 7 10 10 7 7 7 7
2 2 3 3 2 2 2 2
S3
7 7 10 10 7 7 7 7
— — — — — — — —
S11
— — — — — — — —
— — — — — — — —
S12
— — — — — — — —
— — — — — — — —
S13
— — — — — — — —
— — — — — — — —
H5
— — — — — — — —
— — — — — — — —
H8
— — — — — — — —
Annex
that are calculated from 1,5xD. When running in 1,5xD increse speed by 20% and at 2,5 x D reduce speed by 20%. At 3 x D reduce by 30%. Due to machine, material and setup condition it is advisable
also to optimize cutting data.
274
www.secotools.com
Thread tapping
Taps Selection MTH-S041 – MTH-S142
Thread turning
Tool type MTH-S041 MTH-S042 MTH-S043 MTH-S044 MTH-S101 MTH-S102 MTH-S111 MTH-S112 MTH-S142
Thread type UNF UNJF EGUNF EGUNF M M MF MJ UNJF
TCTR 3B 3B 3B 3B 6HX 6HX 6HX 4H 3B
ULDR 1.5 1.5 2.0 1.5 2.0 2.0 2.0 2.0 2.0
THCHT C C C C C C C C C
BSG DIN2184-1 DIN2184-1 DIN2184-1 DIN2184-1 DIN371 DIN376 DIN376 DIN371 DIN2184-1
UNF6-40- UNJF6-40- EGUNF6-40- EGUNF6-40- MF6X0,75- UNJF10-32-
MDT
Thread size M2-M10 M12-M20 MJ3-MJ10
UNF3/8-24 UNJF3/8-24 EGUNF3/8-24 EGUNF3/8-24 MF14X1,5 UNJF3/8-24
FHA 25° 10° 15° 10° 15° 15° 15° 15° 15°
Mini-Shaft™
Thread milling
Coolant No No No No No No No No No
Page(s) 451 452 453 454 455 456 457 458 459

Thread tapping
Annex
275
www.secotools.com
Thread tapping
Cutting data MTH-S041 – S142
vc
SMG
Thread turning
MTH-S041 MTH-S042 MTH-S043 MTH-S044 MTH-S101 MTH-S102 MTH-S111 MTH-S112 MTH-S142

— — — — — — — — —
P1
— — — — — — — — —
— — — — — — — — —
P2
— — — — — — — — —
— — — — — — — — —
P3
— — — — — — — — —
— — — — — — — — —
P4
— — — — — — — — —
— — — — — — — — —
P5
— — — — — — — — —
3 3 7 3 7 7 7 7 7
P6
10 10 23 10 23 23 23 23 23
3 3 7 3 7 7 7 7 7
P7
10 10 23 10 23 23 23 23 23
MDT
— — — — — — — — —
P8
— — — — — — — — —
3 3 6 3 6 6 6 6 6
P11
10 10 20 10 20 20 20 20 20
2 2 4 2 4 4 4 4 4
P12
7 7 13 7 13 13 13 13 13
— — — — — — — — —
M1
— — — — — — — — —
— — — — — — — — —
M2
— — — — — — — — —
— — — — — — — — —
M3
— — — — — — — — —
Mini-Shaft™
2 — 6 — 6 6 6 6 6
M4
7 — 20 — 20 20 20 20 20
2 — 5 — 5 5 5 5 5
M5
7 — 16 — 16 16 16 16 16
— — — — — — — — —
K1
— — — — — — — — —
— — — — — — — — —
K2
— — — — — — — — —
— — — — — — — — —
K3
— — — — — — — — —
— — — — — — — — —
K4
— — — — — — — — —
— — — — — — — — —
K5
Thread milling
— — — — — — — — —
— — — — — — — — —
K6
— — — — — — — — —
— — — — — — — — —
K7
— — — — — — — — —
— — — — — — — — —
N1
— — — — — — — — —
— — — — — — — — —
N2
— — — — — — — — —
— 16 25 16 25 25 25 25 25
N3
— 50 80 50 80 80 80 80 80
— — — — — — — — —
N11
— — — — — — — — —
2 2 — 2 — — — — —
Thread tapping
S1
7 7 — 7 — — — — —
2 2 — 2 — — — — —
S2
7 7 — 7 — — — — —
2 2 — 2 — — — — —
S3
7 7 — 7 — — — — —
— — 5 — 5 5 5 5 5
S11
— — 16 — 16 16 16 16 16
— — 4 — 4 4 4 4 4
S12
— — 13 — 13 13 13 13 13
— — 3 — 3 3 3 3 3
S13
— — 10 — 10 10 10 10 10
— — — — — — — — —
H5
— — — — — — — — —
— — — — — — — — —
H8
— — — — — — — — —
Annex
276
www.secotools.com
Thread tapping
Taps Selection MTP-S001 – MTP-S043
Thread turning
Tool type MTP-S001 MTP-S002 MTP-S011 MTP-S012 MTP-S013 MTP-S042 MTP-S043
Thread type M M MF MJ EGM UNFJ EGUNF
TCTR 6HX 6HX 6HX 4H 4H 3B 3B
ULDR 2.0 2.0 2.0 2.0 2.0 2.0 2.0
THCHT B B B B B B B
BSG DIN371 DIN376 DIN371 DIN371 DIN40435 DIN2184-1 DIN2184-1
UNJF10-32- EGUNF10-32-
MDT
Thread size M2-M10 M12-M20 MF6X0,75-MF14X1,5 MJ4-MJ8 EGM4-EGM8
UNJF3/8-24 EGUNF3/8-24
FHA – – – – – – –
Mini-Shaft™
Thread milling
Coolant No No No No No No No
Page(s) 420 421 422 423 424 425 426

Thread tapping
Annex
277
www.secotools.com
Thread tapping
Cutting data MTP-S001 – S043
vc
SMG
Thread turning
MTP-S001 MTP-S002 MTP-S011 MTP-S012 MTP-S013 MTP-S042 MTP-S043

— — — — — — —
P1
— — — — — — —
— — — — — — —
P2
— — — — — — —
— — — — — — —
P3
— — — — — — —
— — — — — — —
P4
— — — — — — —
— — — — — — —
P5
— — — — — — —
— — — — — — —
P6
— — — — — — —
— — — — — — —
P7
— — — — — — —
MDT
— — — — — — —
P8
— — — — — — —
— — — — — — —
P11
— — — — — — —
— — — — — — —
P12
— — — — — — —
— — — — — — —
M1
— — — — — — —
— — — — — — —
M2
— — — — — — —
— — — — — — —
M3
— — — — — — —
Mini-Shaft™
6 6 6 6 2 6 2
M4
20 20 20 20 7 20 7
5 5 5 5 2 5 2
M5
16 16 16 16 7 16 7
— — — — — — —
K1
— — — — — — —
— — — — — — —
K2
— — — — — — —
— — — — — — —
K3
— — — — — — —
— — — — — — —
K4
— — — — — — —
— — — — — — —
K5
Thread milling
— — — — — — —
— — — — — — —
K6
— — — — — — —
— — — — — — —
K7
— — — — — — —
— — — — — — —
N1
— — — — — — —
— — — — — — —
N2
— — — — — — —
25 25 25 25 16 25 16
N3
80 80 80 80 50 80 50
— — — — — — —
N11
— — — — — — —
4 4 4 4 4 4 4
Thread tapping
S1
13 13 13 13 13 13 13
3 3 3 3 3 3 3
S2
10 10 10 10 10 10 10
3 3 3 3 3 3 3
S3
10 10 10 10 10 10 10
5 5 5 5 4 5 4
S11
16 16 16 16 13 16 13
4 4 4 4 3 4 3
S12
13 13 13 13 10 13 10
3 3 3 3 2 3 2
S13
10 10 10 10 7 10 7
— — — — — — —
H5
— — — — — — —
— — — — — — —
H8
— — — — — — —
Annex
278
www.secotools.com
Thread tapping
Taps Selection MTS-K101 (-A) – MTS-K141
Thread turning
Tool type MTS-K101 MTS-K101-A MTS-K002 MTS-K002-A MTS-K102 MTS-K102-A MTS-K111 MTS-K121 MTS-K131 MTS-K141
Thread type M M M M M M MF G UNC UNF
TCTR 6HX 6HX 6HX 6HX 6HX 6HX 6HX NORMAL-X 2BX 2BX
ULDR 2.5 2.5 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5
THCHT C C/E C C/E C C/E C C C C
BSG DIN371 DIN371 DIN376 DIN376 DIN376 DIN376 DIN374 DIN5156 DIN2184-1 DIN2184-1
MF 10X1 - G1/8-28 - UNC 1/4-20 - UNF 1/4-28 -
MDT
MF 20X1.5 G1-11 UNC 7/8-9 UNF 7/8-14
FHA – – – – – – – – – –
Coolant No Yes No Yes No Yes No No No No Mini-Shaft™

Thread milling
Thread tapping
Page(s) 464 465 466 467 468 469 470 471 472 473

Annex
279
www.secotools.com
Thread tapping
Cutting data MTS-K101 – MTS-K141
vc
SMG
Thread turning
MTS- K101 MTS- K101-A MTS- K102 MTS- K102-A MTS- K111 MTS- K121 MTS- K131 MTS- K141
— — — — — — — —
P1
— — — — — — — —
— — — — — — — —
P2
— — — — — — — —
— — — — — — — —
P3
— — — — — — — —
— — — — — — — —
P4
— — — — — — — —
— — — — — — — —
P5
— — — — — — — —
— — — — — — — —
P6
— — — — — — — —
— — — — — — — —
P7
— — — — — — — —
MDT
— — — — — — — —
P8
— — — — — — — —
— — — — — — — —
P11
— — — — — — — —
— — — — — — — —
P12
— — — — — — — —
— — — — — — — —
M1
— — — — — — — —
— — — — — — — —
M2
— — — — — — — —
— — — — — — — —
M3
— — — — — — — —
Mini-Shaft™
— — — — — — — —
M4
— — — — — — — —
— — — — — — — —
M5
— — — — — — — —
85 85 85 85 85 85 85 85
K1
280 280 280 280 280 280 280 280
75 75 75 75 75 75 75 75
K2
245 245 245 245 245 245 245 245
65 65 65 65 65 65 65 65
K3
215 215 215 215 215 215 215 215
60 60 60 60 60 60 60 60
K4
195 195 195 195 195 195 195 195
36 36 36 36 36 36 36 36
K5
Thread milling
120 120 120 120 120 120 120 120

55 55 55 55 55 55 55 55
K6
180 180 180 180 180 180 180 180
46 46 46 46 46 46 46 46
K7
150 150 150 150 150 150 150 150
— — — — — — — —
N1
— — — — — — — —
— — — — — — — —
N2
— — — — — — — —
— — — — — — — —
N3
— — — — — — — —
— — — — — — — —
N11
— — — — — — — —
— — — — — — — —
Thread tapping
H5
— — — — — — — —
— — — — — — — —
H8
— — — — — — — —
Annex
280
www.secotools.com
Thread tapping
Taps Selection MTH-V015 – MTH-V016
Thread turning
Tool type MTH-V015 MTH-V016
Thread type M M
TCTR 6H 6H
ULDR 2 2
THCHT C C
BSG DIN371 DIN376
MDT
Thread size M3 - M10 M12 - M36
FHA 15° 15°
Mini-Shaft™
Thread milling
Coolant No No
Page(s) 460 461

Thread tapping
Annex
281
www.secotools.com
Thread tapping
Cutting data MTH-V015 – MTH-V016
SMG
Thread turning
MTH- V015 MTH- V016

40 40
P1
130 130
39 39
P2
130 130
33 33
P3
110 110
29 29
P4
95 95
28 28
P5
90 90
31 31
P6
100 100
30 30
P7
100 100
MDT
28 28
P8
90 90
29 29
P11
95 95
17 17
P12
55 55
9 9
M1
30 30
7 7
M2
23 23
5 5
M3
16 16
Mini-Shaft™
4 4
M4
13 13
3 3
M5
10 10
— —
K1
— —
— —
K2
— —
— —
K3
— —
— —
K4
— —
— —
K5
Thread milling
— —
— —
K6
— —
— —
K7
— —
37 37
N1
120 120
24 24
N2
80 80
16 16
N3
50 50
21 21
N11
70 70
— —
Thread tapping
H5
— —
— —
H8
— —
Annex
282
www.secotools.com
Thread tapping
Taps Selection MTH-V048 – MTH-V050
Thread turning
Tool type MTH-V048 MTH-V050
Thread type NPT NPTF
TCTR NORMAL NORMAL
ULDR 1.5 1.5
THCHT C C
BSG DIN/ANSI DIN/ANSI
NPT 1/16-27 NPTF 1/16-27
MDT
Thread size
NPT 1-11.5 NPTF 3/4-14
FHA 15° 15°
Mini-Shaft™
Thread milling
Coolant No No
Page(s) 462 463

Thread tapping
Annex
283
www.secotools.com
Thread tapping
Cutting data MTH-V048 – V050
vc
SMG
Thread turning
MTH- V048 MTH- V050

11 11
P1
36 36
11 11
P2
36 36
10 10
P3
33 33
8 8
P4
26 26
8 8
P5
26 26
9 9
P6
30 30
8 8
P7
26 26
MDT
8 8
P8
26 26
8 8
P11
26 26
5 5
P12
16 16
9 9
M1
30 30
7 7
M2
23 23
5 5
M3
16 16
Mini-Shaft™
4 4
M4
13 13
3 3
M5
10 10
14 14
K1
46 46
12 12
K2
39 39
10 10
K3
33 33
10 10
K4
33 33
6 6
K5
Thread milling
20 20
9 9
K6
30 30
8 8
K7
26 26
23 23
N1
75 75
15 15
N2
49 49
10 10
N3
33 33
13 13
N11
43 43
— —
Thread tapping
H5
— —
— —
H8
— —
Annex
284
www.secotools.com
Thread tapping
Taps Selection MF-V060-A – MF-V063-A
Thread turning
Tool type MF-V060-A MF-V063-A
Thread type M MF
TCTR 6HX 6HX
ULDR 3 3
THCHT C C
BSG DIN2174 DIN2174
MF12x1.25 -
MDT
Thread size M12 - M24
MF16x1.5
FHA – –
Mini-Shaft™
Thread milling
Coolant Yes Yes
Page(s) 474 475

Thread tapping
Annex
285
www.secotools.com
Thread tapping
Cutting data MF-V060-A – MF-V063-A
SMG
Thread turning
MF- V060 MF- V063-A

55 55
P1
180 180
55 55
P2
180 180
48 48
P3
155 155
42 42
P4
140 140
40 40
P5
130 130
45 45
P6
150 150
42 42
P7
140 140
MDT
40 40
P8
130 130
41 41
P11
135 135
24 24
P12
80 80
17 17
M1
55 55
14 14
M2
46 46
11 11
M3
36 36
Mini-Shaft™
8 8
M4
26 26
7 7
M5
23 23
— —
K1
— —
— —
K2
— —
— —
K3
— —
— —
K4
— —
— —
K5
Thread milling
— —
— —
K6
— —
— —
K7
— —
55 55
N1
180 180
35 35
N2
115 115
23 23
N3
75 75
31 31
N11
100 100
— —
Thread tapping
H5
— —
— —
H8
— —
Annex
286
www.secotools.com
Thread tapping
T32-SNC-micro
Blind and through holes – Metric coarse threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSS-PM
• Coating: TiAlN + TiN
• Standard: DIN371
• Thread tolerance class: 4H
Designation Item number TDZ Pitch TCL THL LU LF OAL DCONMS CZCMS PHDR Ø NOF THCHT
mm
0,68 6,0 13 39,32 40,9 2,5 0,75
T32-SN01C03-1X0.25-41R 10139661 M1 0,25 2.50X2.10 2 C
0.027 0.236 0.512 1.548 1.610 0.098 0.030
Mini-Shaft™
0,68 6,0 13 39,32 41,0 2,5 0,85
T32-SN01C03-1.1X0.25-41R 10139662 M1.1 0,25 2.50X2.10 2 C
0.027 0.236 0.512 1.548 1.614 0.098 0.033
0,68 6,0 13 39,32 41,1 2,5 0,95
T32-SN01C03-1.2X0.25-41R 10139663 M1.2 0,25 2.50X2.10 2 C
0.027 0.236 0.512 1.548 1.618 0.098 0.037
0,79 7,0 13 39,21 41,3 2,5 1,1
T32-SN01C03-1.4X0.3-41R 10139664 M1.4 0,3 2.50X2.10 2 C
0.031 0.276 0.512 1.544 1.626 0.098 0.043
Thread milling
Thread tapping
Annex
287
www.secotools.com
Thread tapping
T32-SNC-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
0,92 8,0 13 39,08 41,4 2,5 1,25
T32-SN01C03-1.6X0.35-63R 10139665 M1.6 0,35 2.50X2.10 2 C
0.036 0.315 0.512 1.539 1.630 0.098 0.049
Mini-Shaft™
0,92 8,0 13 39,08 41,5 2,5 1,35

T32-SN01C03-1.7X0.35-63R 10139666 M1.7 0,35 2.50X2.10 2 C
0.036 0.315 0.512 1.539 1.634 0.098 0.053
0,92 8,0 13 39,08 41,6 2,5 1,45
T32-SN01C03-1.8X0.35-63R 10139667 M1.8 0,35 2.50X2.10 2 C
0.036 0.315 0.512 1.539 1.638 0.098 0.057
1,13 10,0 13 43,87 46,3 2,8 1,6
T32-SN01C03-2X0.4-63R 10139668 M2 0,4 2.80X2.10 2 C
0.044 0.394 0.512 1.727 1.823 0.110 0.063
1,24 10,0 13 43,76 46,3 2,8 1,75
T32-SN01C03-2.2X0.45-63R 10139669 M2.2 0,45 2.80X2.10 2 C
0.049 0.394 0.512 1.723 1.823 0.110 0.069
1,13 10,0 13 43,87 46,3 2,8 1,9
T32-SN01C03-2.3X0.4-63R 10139670 M2.3 0,4 2.80X2.10 2 C
0.044 0.394 0.512 1.727 1.823 0.110 0.075
1,24 9,0 14 48,76 51,7 2,8 2,05
Thread milling
T32-SN01C03-2.5X0.45-63R 10139672 M2.5 0,45 2.80X2.10 2 C

0.049 0.354 0.551 1.920 2.035 0.110 0.081
1,24 9,0 14 48,76 51,7 2,8 2,15
T32-SN01C03-2.6X0.45-63R 10139673 M2.6 0,45 2.80X2.10 2 C
0.049 0.354 0.551 1.920 2.035 0.110 0.085
Thread tapping
Annex
288
www.secotools.com
Thread tapping
T32-SNC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
1,1 10,0 18 54,9 57,2 3,5 2,5
T32-SN01C03-3X0.5-63R 10139674 M3 0,5 3.50X2.70 3 C
0.043 0.394 0.709 2.161 2.252 0.138 0.098
Mini-Shaft™
1,28 12,0 20 54,72 57,4 4,0 2,9
T32-SN01C03-3.5X0.6-63R 10139675 M3.5 0,6 4.00X3.00 3 C
0.050 0.472 0.787 2.154 2.260 0.157 0.114
1,61 12,0 21 61,39 64,6 4,5 3,3
T32-SN01C03-4X0.7-63R 10139676 M4 0,7 4.50X3.40 3 C
0.063 0.472 0.827 2.417 2.543 0.177 0.130
1,61 14,0 25 68,39 71,8 6,0 3,8
T32-SN01C03-4.5X0.75-63R 10139677 M4.5 0,75 6.00X4.90 3 C
0.063 0.551 0.984 2.693 2.827 0.236 0.150
1,78 14,0 25 68,22 72,0 6,0 4,2
T32-SN01C03-5X0.8-63R 10139678 M5 0,8 6.00X4.90 3 C
0.070 0.551 0.984 2.686 2.835 0.236 0.165
2,14 18,0 30 77,86 82,4 6,0 5,0
T32-SN01C03-6X1-63R 10139679 M6 1,0 6.00X4.90 3 C
0.084 0.709 1.181 3.065 3.244 0.236 0.197
2,14 18,0 30 77,86 82,9 7,0 6,0
Thread milling
T32-SN01C03-7X1-63R 10139680 M7 1,0 7.00X5.50 3 C
0.084 0.709 1.181 3.065 3.264 0.276 0.236
2,94 20,0 35 87,06 93,3 8,0 6,8
T32-SN01C03-8X1.25-63R 10139681 M8 1,25 8.00X6.20 3 C
0.116 0.787 1.378 3.428 3.673 0.315 0.268
2,94 20,0 35 87,06 91,7 9,0 7,8
T32-SN01C03-9X1.25-63R 10139682 M9 1,25 9.00X7.00 3 C
0.116 0.787 1.378 3.428 3.610 0.354 0.307
3,55 20,0 39 96,45 101,8 10,0 8,5
T32-SN01C03-10X1.5-63R 10139683 M10 1,5 10.00X8.00 3 C
0.140 0.787 1.535 3.797 4.008 0.394 0.335
Thread tapping
Annex
289
www.secotools.com
Thread tapping
T32-SNC
Thread turning
LF
TCL DCONMS
TD
THL CZCMS
LU
OAL
MDT
• Substrate: HSSE
mm
1,1 11,0 36 54,9 57,2 2,2 2,5
T32-SN01C06-3X0.5-63R 10139694 M3 0,5 2.20X1.80 3 C
0.043 0.433 1.417 2.161 2.252 0.087 0.098
Mini-Shaft™
1,61 12,0 43 61,39 64,6 2,8 3,3

T32-SN01C06-4X0.7-63R 10139696 M4 0,7 2.80X2.10 3 C
0.063 0.472 1.693 2.417 2.543 0.110 0.130
1,78 14,0 49 68,22 72,0 3,5 4,2
T32-SN01C06-5X0.8-63R 10139697 M5 0,8 3.50X2.70 3 C
0.070 0.551 1.929 2.686 2.835 0.138 0.165
2,14 18,0 59 77,86 82,4 4,5 5,0
T32-SN01C06-6X1-63R 10139698 M6 1,0 4.50X3.40 3 C
0.084 0.709 2.323 3.065 3.244 0.177 0.197
Thread milling
Thread tapping
Annex
290
www.secotools.com
Thread tapping
T32-SNC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
2,94 20,0 67 87,06 90,0 6,0 6,8
T32-SN01C06-8X1.25-63R 10139700 M8 1,25 6.00X4.90 3 C
0.116 0.787 2.638 3.428 3.543 0.236 0.268
Mini-Shaft™
3,55 20,0 77 96,45 100,0 7,0 8,5
T32-SN01C06-10X1.5-63R 10139702 M10 1,5 7.00X5.50 3 C
0.140 0.787 3.031 3.797 3.937 0.276 0.335
4,17 24,0 83 105,83 110,0 9,0 10,2
T32-SN01C06-12X1.75-63R 10139703 M12 1,75 9.00X7.00 3 C
0.164 0.945 3.268 4.167 4.331 0.354 0.402
4,78 25,0 81 105,22 110,0 11,0 12,0
T32-SN01C06-14X2-63R 10139704 M14 2,0 11.00X9.00 4 C
0.188 0.984 3.189 4.143 4.331 0.433 0.472
4,88 32,0 68 105,12 110,0 12,0 14,0
T32-SN01C06-16X2-63R 10139705 M16 2,0 12.00X9.00 4 C
0.192 1.260 2.677 4.139 4.331 0.472 0.551
5,97 32,0 81 119,03 125,0 14,0 15,5
T32-SN01C06-18X2.5-63R 10139706 M18 2,5 14.00X11.00 4 C
0.235 1.260 3.189 4.686 4.921 0.551 0.610
6,17 32,0 95 133,83 140,0 16,0 17,5
Thread milling
T32-SN01C06-20X2.5-63R 10139707 M20 2,5 16.00X12.00 4 C
0.243 1.260 3.740 5.269 5.512 0.630 0.689
6,17 32,0 93 133,83 140,0 18,0 19,5
T32-SN01C06-22X2.5-63R 10139708 M22 2,5 18.00X14.50 4 C
0.243 1.260 3.661 5.269 5.512 0.709 0.768
7,4 38,0 113 152,6 160,0 18,0 21,0
T32-SN01C06-24X3-63R 10139709 M24 3,0 18.00X14.50 4 C
0.291 1.496 4.449 6.008 6.299 0.709 0.827
7,4 38,0 97 152,6 160,0 20,0 24,0
T32-SN01C06-27X3-63R 10139710 M27 3,0 20.00X16.00 4 C
0.291 1.496 3.819 6.008 6.299 0.787 0.945
8,4 45,0 115 171,6 180,0 22,0 26,5
T32-SN01C06-30X3.5-63R 10139711 M30 3,5 22.00X18.00 4 C
0.331 1.772 4.528 6.756 7.087 0.866 1.043
8,4 45,0 113 171,6 180,0 25,0 29,5
T32-SN01C06-33X3.5-63R 10139712 M33 3,5 25.00X20.00 4 C
0.331 1.772 4.449 6.756 7.087 0.984 1.161
Thread tapping
9,4 50,0 131 190,6 200,0 28,0 32,0

T32-SN01C06-36X4-63R 10139713 M36 4,0 28.00X22.00 4 C
0.370 1.969 5.157 7.504 7.874 1.102 1.260
9,4 50,0 102 190,6 200,0 32,0 35,0
T32-SN01C06-39X4-63R 10139714 M39 4,0 32.00X24.00 4 C
0.370 1.969 4.016 7.504 7.874 1.260 1.378
10,4 60,0 102 189,6 200,0 32,0 37,5
T32-SN01C06-42X4.5-63R 10139715 M42 4,5 32.00X24.00 5 C
0.409 2.362 4.016 7.465 7.874 1.260 1.476
10,42 60,0 117 209,58 220,0 36,0 40,5
T32-SN01C06-45X4.5-63R 10139716 M45 4,5 36.00X29.00 5 C
0.410 2.362 4.606 8.251 8.661 1.417 1.594
11,4 65,0 147 238,6 250,0 36,0 43,0
T32-SN01C06-48X5-63R 10139717 M48 5,0 36.00X29.00 5 C
0.449 2.559 5.787 9.394 9.843 1.417 1.693
11,4 65,0 120 238,6 250,0 40,0 47,0
T32-SN01C06-52X5-63R 10139718 M52 5,0 40.00X32.00 5 C
0.449 2.559 4.724 9.394 9.843 1.575 1.850
Annex
291
www.secotools.com
Thread tapping
T32-SNC
Blind and through holes – Metric coarse threads, left hand thread
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
1,1 10,0 18 54,9 57,2 3,5 2,5
T32-SN01C03-3X0.5-63L 10139686 M3 0,5 3.50X2.70 3 C
0.043 0.394 0.709 2.161 2.252 0.138 0.098
Mini-Shaft™
1,61 12,0 21 61,39 64,6 4,5 3,3

T32-SN01C03-4X0.7-63L 10139687 M4 0,7 4.50X3.40 3 C
0.063 0.472 0.827 2.417 2.543 0.177 0.130
1,78 14,0 25 68,22 72,0 6,0 4,2
T32-SN01C03-5X0.8-63L 10139688 M5 0,8 6.00X4.90 3 C
0.070 0.551 0.984 2.686 2.835 0.236 0.165
2,14 18,0 30 77,86 82,4 6,0 5,0
T32-SN01C03-6X1-63L 10139689 M6 1,0 6.00X4.90 3 C
0.084 0.709 1.181 3.065 3.244 0.236 0.197
2,14 18,0 30 77,86 82,9 7,0 6,0
T32-SN01C03-7X1-63L 10139690 M7 1,0 7.00X5.50 3 C
0.084 0.709 1.181 3.065 3.264 0.276 0.236
2,94 20,0 35 87,06 93,3 8,0 6,8
T32-SN01C03-8X1.25-63L 10139691 M8 1,25 8.00X6.20 3 C
0.116 0.787 1.378 3.428 3.673 0.315 0.268
2,94 20,0 35 87,06 91,7 9,0 7,8
Thread milling
T32-SN01C03-9X1.25-63L 10139692 M9 1,25 9.00X7.00 3 C

0.116 0.787 1.378 3.428 3.610 0.354 0.307
3,55 20,0 39 96,45 101,8 10,0 8,5
T32-SN01C03-10X1.5-63L 10139693 M10 1,5 10.00X8.00 3 C
0.140 0.787 1.535 3.797 4.008 0.394 0.335
Thread tapping
Annex
292
www.secotools.com
Thread tapping
T32-SNC
Blind and through holes – Metric coarse threads, left hand thread
Thread turning
LF
TCL DCONMS
TD
THL CZCMS
LU
OAL
MDT
• Substrate: HSSE
mm
4,17 24,0 83 105,83 110,0 9,0 10,2
T32-SN01C06-12X1.75-63L 10139751 M12 1,75 9.00X7.00 3 C
0.164 0.945 3.268 4.167 4.331 0.354 0.402
Mini-Shaft™
4,88 32,0 68 105,12 110,0 12,0 14,0
T32-SN01C06-16X2-63L 10139752 M16 2,0 12.00X9.00 4 C
0.192 1.260 2.677 4.139 4.331 0.472 0.551
6,17 32,0 95 133,83 140,0 16,0 17,5
T32-SN01C06-20X2.5-63L 10139753 M20 2,5 16.00X12.00 4 C
0.243 1.260 3.740 5.269 5.512 0.630 0.689
7,4 38,0 113 152,6 160,0 18,0 21,0
T32-SN01C06-24X3-63L 10139754 M24 3,0 18.00X14.50 4 C
0.291 1.496 4.449 6.008 6.299 0.709 0.827
Thread milling
Thread tapping
Annex
293
www.secotools.com
Thread tapping
T32-SNC
Blind and through holes – MF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
2,44 20,0 35 87,56 93,3 8,0 7,0
T32-SN02C03-8X1-63R 10139684 MF8X1.0 1,0 8.00X6.20 3 C
0.096 0.787 1.378 3.447 3.673 0.315 0.276
Mini-Shaft™
2,54 20,0 35 87,46 91,8 10,0 9,0

T32-SN02C03-10X1-63R 10139685 MF10X1.0 1,0 10.00X8.00 3 C
0.100 0.787 1.378 3.443 3.614 0.394 0.354
Thread milling
Thread tapping
Annex
294
www.secotools.com
Thread tapping
T32-SNC
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
2,44 20,0 67 87,56 90,0 6,0 7,0
T32-SN02C05-8X1-63R 10139719 MF8X1.0 1,0 6.00X4.90 3 C
0.096 0.787 2.638 3.447 3.543 0.236 0.276
Mini-Shaft™
3,43 18,0 67 86,57 90,0 7,0 9,2
T32-SN02C05-10X0.75-63R 10139720 MF10X0.75 0,75 7.00X5.50 3 C
0.135 0.709 2.638 3.408 3.543 0.276 0.362
2,54 20,0 67 87,46 90,0 7,0 9,0
T32-SN02C05-10X1-63R 10139721 MF10X1.0 1,0 7.00X5.50 3 C
0.100 0.787 2.638 3.443 3.543 0.276 0.354
3,04 20,0 77 96,96 100,0 7,0 8,8
T32-SN02C05-10X1.25-63R 10139722 MF10X1.25 1,25 7.00X5.50 3 C
0.120 0.787 3.031 3.817 3.937 0.276 0.346
2,65 20,0 73 97,35 100,0 9,0 11,0
T32-SN02C05-12X1-63R 10139723 MF12X1.0 1,0 9.00X7.00 3 C
0.104 0.787 2.874 3.833 3.937 0.354 0.433
3,16 20,0 73 96,84 100,0 9,0 10,8
T32-SN02C05-12X1.25-63R 10139724 MF12X1.25 1,25 9.00X7.00 3 C
0.124 0.787 2.874 3.813 3.937 0.354 0.425
3,66 20,0 73 96,34 100,0 9,0 10,5
Thread milling
T32-SN02C05-12X1.5-63R 10139725 MF12X1.5 1,5 9.00X7.00 3 C
0.144 0.787 2.874 3.793 3.937 0.354 0.413
2,75 20,0 71 97,25 100,0 11,0 13,0
T32-SN02C05-14X1-63R 10139726 MF14X1.0 1,0 11.00X9.00 4 C
0.108 0.787 2.795 3.829 3.937 0.433 0.512
3,26 20,0 71 96,74 100,0 11,0 12,8
T32-SN02C05-14X1.25-63R 10139727 MF14X1.25 1,25 11.00X9.00 4 C
0.128 0.787 2.795 3.809 3.937 0.433 0.504
3,76 20,0 71 96,24 100,0 11,0 12,5
T32-SN02C05-14X1.5-63R 10139728 MF14X1.5 1,5 11.00X9.00 4 C
0.148 0.787 2.795 3.789 3.937 0.433 0.492
2,85 20,0 58 97,15 100,0 12,0 15,0
T32-SN02C05-16X1-63R 10139729 MF16X1.0 1,0 12.00X9.00 4 C
0.112 0.787 2.283 3.825 3.937 0.472 0.591
3,86 20,0 58 96,14 100,0 12,0 14,5
T32-SN02C05-16X1.5-63R 10139730 MF16X1.5 1,5 12.00X9.00 4 C
0.152 0.787 2.283 3.785 3.937 0.472 0.571
Thread tapping
3,96 24,0 66 106,04 110,0 14,0 16,5

T32-SN02C05-18X1.5-63R 10139731 MF18X1.5 1,5 14.00X11.00 4 C
0.156 0.945 2.598 4.175 4.331 0.551 0.650
4,98 27,0 81 120,02 125,0 14,0 16,0
T32-SN02C05-18X2-63R 10139732 MF18X2.0 2,0 14.00X11.00 4 C
0.196 1.063 3.189 4.725 4.921 0.551 0.630
4,16 24,0 80 120,84 125,0 16,0 18,5
T32-SN02C05-20X1.5-63R 10139733 MF20X1.5 1,5 16.00X12.00 4 C
0.164 0.945 3.150 4.757 4.921 0.630 0.728
5,18 27,0 95 134,82 140,0 16,0 18,0
T32-SN02C05-20X2-63R 10139734 MF20X2.0 2,0 16.00X12.00 4 C
0.204 1.063 3.740 5.308 5.512 0.630 0.709
4,16 24,0 78 120,84 125,0 18,0 20,5
T32-SN02C05-22X1.5-63R 10139735 MF22X1.5 1,5 18.00X14.50 4 C
0.164 0.945 3.071 4.757 4.921 0.709 0.807
5,18 27,0 93 134,82 140,0 18,0 20,0
T32-SN02C05-22X2-63R 10139736 MF22X2.0 2,0 18.00X14.50 4 C
0.204 1.063 3.661 5.308 5.512 0.709 0.787
Annex
3,88 27,0 93 136,12 140,0 18,0 22,5

T32-SN02C05-24X1.5-63R 10139737 MF24X1.5 1,5 18.00X14.50 4 C
0.153 1.063 3.661 5.359 5.512 0.709 0.886
4,89 27,0 93 135,11 140,0 18,0 22,0
T32-SN02C05-24X2-63R 10139738 MF24X2.0 2,0 18.00X14.50 4 C
0.193 1.063 3.661 5.319 5.512 0.709 0.866
4,38 27,0 77 135,62 140,0 20,0 25,5
T32-SN02C05-27X1.5-63R 10139739 MF27X1.5 1,5 20.00X16.00 4 C
0.172 1.063 3.031 5.339 5.512 0.787 1.004
295
www.secotools.com
Thread tapping
mm
Thread turning
5,39 27,0 77 134,61 140,0 20,0 25,0

T32-SN02C05-27X2-63R 10139740 MF27X2.0 2,0 20.00X16.00 4 C
0.212 1.063 3.031 5.300 5.512 0.787 0.984
4,38 27,0 85 145,62 150,0 22,0 28,5
T32-SN02C05-30X1.5-63R 10139741 MF30X1.5 1,5 22.00X18.00 4 C
0.172 1.063 3.346 5.733 5.906 0.866 1.122
5,39 27,0 85 144,61 150,0 22,0 28,0
T32-SN02C05-30X2-63R 10139742 MF30X1.0 2,0 22.00X18.00 4 C
0.212 1.063 3.346 5.693 5.906 0.866 1.102
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
296
www.secotools.com
Thread tapping
T32-SNC
Blind and through holes – G threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
• Thread tolerance class: NORMAL
Designation Item number TDZ TD Pitch TCL THL LU LF OAL DCONMS CZCMS PHDR Ø NOF THCHT
mm mm mm mm mm mm mm mm
TPI
Inch Inch Inch Inch Inch Inch Inch Inch
9,728 2,43 18,0 67 87,57 90,0 7,0 8,8
T32-SN21C09-1/8-28-11R 10139743 G1/8-28 28.0 7.00X5.50 3 C
0.383 0.096 0.709 2.638 3.448 3.543 0.276 0.346
Mini-Shaft™
13,157 3,52 22,0 71 96,48 100,0 11,0 11,8
T32-SN21C09-1/4-19-11R 10139744 G1/4-19 19.0 11.00X9.00 4 C
0.518 0.139 0.866 2.795 3.798 3.937 0.433 0.465
16,662 3,72 22,0 58 96,28 100,0 12,0 15,25
T32-SN21C09-3/8-19-11R 10139745 G3/8-19 19.0 12.00X9.00 4 C
0.656 0.146 0.866 2.283 3.791 3.937 0.472 0.600
20,955 5,02 25,0 80 119,98 125,0 16,0 19,0
T32-SN21C09-1/2-14-11R 10139746 G1/2-14 14.0 16.00X12.00 4 C
0.825 0.198 0.984 3.150 4.724 4.921 0.630 0.748
22,911 4,94 25,0 78 120,06 125,0 18,0 21,0
T32-SN21C09-5/8-14-11R 10139747 G5/8-14 14.0 18.00X14.50 4 C
0.902 0.194 0.984 3.071 4.727 4.921 0.709 0.827
26,441 5,19 28,0 77 134,81 140,0 20,0 24,5
T32-SN21C09-3/4-14-11R 10139748 G3/4-14 14.0 20.00X16.00 4 C
1.041 0.204 1.102 3.031 5.307 5.512 0.787 0.965
30,201 5,13 30,0 85 144,87 150,0 22,0 28,25
Thread milling
T32-SN21C09-7/8-14-11R 10139749 G7/8-14 14.0 22.00X18.00 4 C
1.189 0.202 1.181 3.346 5.704 5.906 0.866 1.112
33,249 6,03 32,0 93 153,97 160,0 25,0 30,75
T32-SN21C09-1-11-11R 10139750 G1-11 11.0 25.00X20.00 4 C
1.309 0.237 1.260 3.661 6.062 6.299 0.984 1.211
Thread tapping
Annex
297
www.secotools.com
Thread tapping
T32-PNB-micro
Through holes – Metric coarse threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
1,13 6,0 13 38,87 40,9 2,5 0,75
T32-PN01B03-1X0.25-41R 10139427 M1 0,25 2.50X2.10 2 B
0.044 0.236 0.512 1.530 1.610 0.098 0.030
Mini-Shaft™
1,13 6,0 13 38,87 41,0 2,5 0,85

T32-PN01B03-1.1X0.25-41R 10139428 M1.1 0,25 2.50X2.10 2 B
0.044 0.236 0.512 1.530 1.614 0.098 0.033
1,13 6,0 13 38,87 41,1 2,5 0,95
T32-PN01B03-1.2X0.25-41R 10139429 M1.2 0,25 2.50X2.10 2 B
0.044 0.236 0.512 1.530 1.618 0.098 0.037
1,32 7,0 13 38,68 41,3 2,5 1,1
T32-PN01B03-1.4X0.3-41R 10139430 M1.4 0,3 2.50X2.10 2 B
0.052 0.276 0.512 1.523 1.626 0.098 0.043
Thread milling
Thread tapping
Annex
298
www.secotools.com
Thread tapping
T32-PNB-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
1,54 8,0 13 38,46 41,4 2,5 1,25
T32-PN01B03-1.6X0.35-63R 10139431 M1.6 0,35 2.50X2.10 2 B
0.061 0.315 0.512 1.514 1.630 0.098 0.049
Mini-Shaft™
1,54 8,0 13 38,46 41,5 2,5 1,35
T32-PN01B03-1.7X0.35-63R 10139432 M1.7 0,35 2.50X2.10 2 B
0.061 0.315 0.512 1.514 1.634 0.098 0.053
1,54 8,0 13 38,46 41,6 2,5 1,45
T32-PN01B03-1.8X0.35-63R 10139433 M1.8 0,35 2.50X2.10 2 B
0.061 0.315 0.512 1.514 1.638 0.098 0.057
1,89 10,0 13 43,11 46,3 2,8 1,6
T32-PN01B03-2X0.4-63R 10139434 M2 0,4 2.80X2.10 2 B
0.074 0.394 0.512 1.697 1.823 0.110 0.063
2,07 10,0 13 42,93 46,3 2,8 1,75
T32-PN01B03-2.2X0.45-63R 10139435 M2.2 0,45 2.80X2.10 2 B
0.081 0.394 0.512 1.690 1.823 0.110 0.069
1,89 10,0 13 43,11 46,3 2,8 1,9
T32-PN01B03-2.3X0.4-63R 10139436 M2.3 0,4 2.80X2.10 2 B
0.074 0.394 0.512 1.697 1.823 0.110 0.075
2,07 9,0 14 47,93 51,7 2,8 2,05
Thread milling
T32-PN01B03-2.5X0.45-63R 10139437 M2.5 0,45 2.80X2.10 2 B
0.081 0.354 0.551 1.887 2.035 0.110 0.081
2,07 9,0 14 47,93 51,7 2,8 2,15
T32-PN01B03-2.6X0.45-63R 10139438 M2.6 0,45 2.80X2.10 2 B
0.081 0.354 0.551 1.887 2.035 0.110 0.085
Thread tapping
Annex
299
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
2,28 10,0 18 53,72 57,2 3,5 2,5
T32-PN01B03-3X0.5-63R 10139439 M3 0,5 3.50X2.70 3 B
0.090 0.394 0.709 2.115 2.252 0.138 0.098
Mini-Shaft™
2,65 12,0 20 53,35 57,4 4,0 2,9

T32-PN01B03-3.5X0.6-63R 10139440 M3.5 0,6 4.00X3.00 3 B
0.104 0.472 0.787 2.100 2.260 0.157 0.114
3,33 12,0 21 59,67 64,6 4,5 3,3
T32-PN01B03-4X0.7-63R 10139441 M4 0,7 4.50X3.40 3 B
0.131 0.472 0.827 2.349 2.543 0.177 0.130
3,33 14,0 25 66,67 71,8 6,0 3,8
T32-PN01B03-4.5X0.75-63R 10139442 M4.5 0,75 6.00X4.90 3 B
0.131 0.551 0.984 2.625 2.827 0.236 0.150
3,68 14,0 25 66,32 72,0 6,0 4,2
T32-PN01B03-5X0.8-63R 10139443 M5 0,8 6.00X4.90 3 B
0.145 0.551 0.984 2.611 2.835 0.236 0.165
4,41 18,0 30 75,59 82,4 6,0 5,0
T32-PN01B03-6X1-63R 10139444 M6 1,0 6.00X4.90 3 B
0.174 0.709 1.181 2.976 3.244 0.236 0.197
4,41 18,0 30 75,59 82,9 7,0 6,0
Thread milling
T32-PN01B03-7X1-63R 10139445 M7 1,0 7.00X5.50 3 B

0.174 0.709 1.181 2.976 3.264 0.276 0.236
5,43 20,0 35 84,57 93,3 8,0 6,8
T32-PN01B03-8X1.25-63R 10139446 M8 1,25 8.00X6.20 3 B
0.214 0.787 1.378 3.330 3.673 0.315 0.268
5,7 20,0 35 84,3 91,7 9,0 7,8
T32-PN01B03-9X1.25-63R 10139447 M9 1,25 9.00X7.00 3 B
0.224 0.787 1.378 3.319 3.610 0.354 0.307
6,84 20,0 39 93,16 101,8 10,0 8,5
T32-PN01B03-10X1.5-63R 10139448 M10 1,5 10.00X8.00 3 B
0.269 0.787 1.535 3.668 4.008 0.394 0.335
Thread tapping
Annex
300
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL DCONMS
TD
THL CZCMS
LU
OAL
MDT
• Substrate: HSSE
mm
2,2 11,0 36 53,8 57,2 2,2 2,5
T32-PN01B06-3X0.5-63R 10139482 M3 0,5 2.20X1.80 3 B
0.087 0.433 1.417 2.118 2.252 0.087 0.098
Mini-Shaft™
3,3 12,0 43 59,7 64,6 2,8 3,3
T32-PN01B06-4X0.7-63R 10139484 M4 0,7 2.80X2.10 3 B
0.130 0.472 1.693 2.350 2.543 0.110 0.130
3,6 14,0 49 66,4 72,0 3,5 4,2
T32-PN01B06-5X0.8-63R 10139485 M5 0,8 3.50X2.70 3 B
0.142 0.551 1.929 2.614 2.835 0.138 0.165
4,4 18,0 59 75,6 82,4 4,5 5,0
T32-PN01B06-6X1-63R 10139486 M6 1,0 4.50X3.40 3 B
0.173 0.709 2.323 2.976 3.244 0.177 0.197
Thread milling
Thread tapping
Annex
301
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
5,7 20,0 67 84,3 90,0 6,0 6,8
T32-PN01B06-8X1.25-63R 10139488 M8 1,25 6.00X4.90 3 B
0.224 0.787 2.638 3.319 3.543 0.236 0.268
Mini-Shaft™
5,7 20,0 67 84,3 90,0 7,0 7,8

T32-PN01B06-9X1.25-63R 10139489 M9 1,25 7.00X5.50 3 B
0.224 0.787 2.638 3.319 3.543 0.276 0.307
6,84 20,0 77 93,16 100,0 7,0 8,5
T32-PN01B06-10X1.5-63R 10139490 M10 1,5 7.00X5.50 3 B
0.269 0.787 3.031 3.668 3.937 0.276 0.335
8,01 24,0 83 101,99 110,0 9,0 10,2
T32-PN01B06-12X1.75-63R 10139491 M12 1,75 9.00X7.00 3 B
0.315 0.945 3.268 4.015 4.331 0.354 0.402
9,14 25,0 81 100,86 110,0 11,0 12,0
T32-PN01B06-14X2-63R 10139492 M14 2,0 11.00X9.00 3 B
0.360 0.984 3.189 3.971 4.331 0.433 0.472
9,24 32,0 68 100,76 110,0 12,0 14,0
T32-PN01B06-16X2-63R 10139493 M16 2,0 12.00X9.00 3 B
0.364 1.260 2.677 3.967 4.331 0.472 0.551
11,38 32,0 81 113,62 125,0 14,0 15,5
Thread milling
T32-PN01B06-18X2.5-63R 10139494 M18 2,5 14.00X11.00 4 B

0.448 1.260 3.189 4.473 4.921 0.551 0.610
11,58 32,0 95 128,42 140,0 16,0 17,5
T32-PN01B06-20X2.5-63R 10139495 M20 2,5 16.00X12.00 4 B
0.456 1.260 3.740 5.056 5.512 0.630 0.689
11,78 32,0 93 128,22 140,0 18,0 19,5
T32-PN01B06-22X2.5-63R 10139496 M22 2,5 18.00X14.50 4 B
0.464 1.260 3.661 5.048 5.512 0.709 0.768
13,68 38,0 113 146,32 160,0 18,0 21,0
T32-PN01B06-24X3-63R 10139497 M24 3,0 18.00X14.50 4 B
0.539 1.496 4.449 5.761 6.299 0.709 0.827
13,88 38,0 97 146,12 160,0 20,0 24,0
T32-PN01B06-27X3-63R 10139498 M27 3,0 20.00X16.00 4 B
0.546 1.496 3.819 5.753 6.299 0.787 0.945
15,93 45,0 115 164,07 180,0 22,0 26,5
T32-PN01B06-30X3.5-63R 10139499 M30 3,5 22.00X18.00 4 B
0.627 1.772 4.528 6.459 7.087 0.866 1.043
Thread tapping
15,93 45,0 113 164,07 180,0 25,0 29,5

T32-PN01B06-33X3.5-63R 10139500 M33 3,5 25.00X20.00 4 B
0.627 1.772 4.449 6.459 7.087 0.984 1.161
17,97 50,0 131 182,03 200,0 28,0 32,0
T32-PN01B06-36X4-63R 10139501 M36 4,0 28.00X22.00 4 B
0.707 1.969 5.157 7.167 7.874 1.102 1.260
17,97 50,0 102 182,03 200,0 32,0 35,0
T32-PN01B06-39X4-63R 10139502 M39 4,0 32.00X24.00 4 B
0.707 1.969 4.016 7.167 7.874 1.260 1.378
20,02 60,0 102 179,98 200,0 32,0 37,5
T32-PN01B06-42X4.5-63R 10139503 M42 4,5 32.00X24.00 5 B
0.788 2.362 4.016 7.086 7.874 1.260 1.476
20,02 60,0 117 199,98 220,0 36,0 40,5
T32-PN01B06-45X4.5-63R 10139504 M45 4,5 36.00X29.00 5 B
0.788 2.362 4.606 7.873 8.661 1.417 1.594
22,07 65,0 147 227,93 250,0 36,0 43,0
T32-PN01B06-48X5-63R 10139505 M48 5,0 36.00X29.00 5 B
0.869 2.559 5.787 8.974 9.843 1.417 1.693
Annex
22,07 65,0 120 227,93 250,0 40,0 47,0

T32-PN01B06-52X5-63R 10139506 M52 5,0 40.00X32.00 5 B
0.869 2.559 4.724 8.974 9.843 1.575 1.850
302
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL DCONMS
TD
THL CZCMS
LU
OAL
MDT
• Substrate: HSSE
• Standard: DIN371/EL
mm
2,28 10,0 18 97,72 101,2 3,5 2,5
T32-PN01B04-3X0.5-63R 10139652 M3 0,5 3.50X2.70 3 B
0.090 0.394 0.709 3.847 3.984 0.138 0.098
Mini-Shaft™
3,33 12,0 21 121,67 126,6 4,5 3,3
T32-PN01B04-4X0.7-63R 10139653 M4 0,7 4.50X3.40 3 B
0.131 0.472 0.827 4.790 4.984 0.177 0.130
3,68 14,0 25 136,32 142,0 6,0 4,2
T32-PN01B04-5X0.8-63R 10139654 M5 0,8 6.00X4.90 3 B
0.145 0.551 0.984 5.367 5.591 0.236 0.165
4,41 18,0 30 155,59 162,4 6,0 5,0
T32-PN01B04-6X1-63R 10139655 M6 1,0 6.00X4.90 3 B
0.174 0.709 1.181 6.126 6.394 0.236 0.197
Thread milling
Thread tapping
Annex
303
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL DCONMS
TD
THL CZCMS
LU
OAL
MDT
• Substrate: HSSE
mm
5,7 20,0 157 174,3 180,0 6,0 6,8
T32-PN01B07-8X1.25-63R 10139656 M8 1,25 6.00X4.90 3 B
0.224 0.787 6.181 6.862 7.087 0.236 0.268
Mini-Shaft™
6,84 20,0 177 193,16 200,0 7,0 8,5

T32-PN01B07-10X1.5-63R 10139657 M10 1,5 7.00X5.50 3 B
0.269 0.787 6.969 7.605 7.874 0.276 0.335
8,01 24,0 83 211,99 220,0 9,0 10,2
T32-PN01B07-12X1.75-63R 10139658 M12 1,75 9.00X7.00 3 B
0.315 0.945 3.268 8.346 8.661 0.354 0.402
9,24 32,0 191 210,76 220,0 11,0 14,0
T32-PN01B07-16X2-63R 10139659 M16 2,0 11.00X9.00 3 B
0.364 1.260 7.520 8.298 8.661 0.433 0.551
Thread milling
Thread tapping
Annex
304
www.secotools.com
Thread tapping
T32-PNB
Through holes – Metric coarse threads, 6G
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
• Thread tolerance class: 6G
mm
2,28 10,0 18 53,72 57,2 3,5 2,5
T32-PN01B03-3X0.5-61R 10139474 M3 0,5 3.50X2.70 3 B
0.090 0.394 0.709 2.115 2.252 0.138 0.098
Mini-Shaft™
3,33 12,0 21 59,67 64,6 4,5 3,3
T32-PN01B03-4X0.7-61R 10139475 M4 0,7 4.50X3.40 3 B
0.131 0.472 0.827 2.349 2.543 0.177 0.130
3,68 14,0 25 66,32 72,0 6,0 4,2
T32-PN01B03-5X0.8-61R 10139476 M5 0,8 6.00X4.90 3 B
0.145 0.551 0.984 2.611 2.835 0.236 0.165
4,41 18,0 30 75,59 82,4 6,0 5,0
T32-PN01B03-6X1-61R 10139477 M6 1,0 6.00X4.90 3 B
0.174 0.709 1.181 2.976 3.244 0.236 0.197
4,41 18,0 30 75,59 82,9 7,0 6,0
T32-PN01B03-7X1-61R 10139478 M7 1,0 7.00X5.50 3 B
0.174 0.709 1.181 2.976 3.264 0.276 0.236
5,43 20,0 35 84,57 93,3 8,0 6,8
T32-PN01B03-8X1.25-61R 10139479 M8 1,25 8.00X6.20 3 B
0.214 0.787 1.378 3.330 3.673 0.315 0.268
5,7 20,0 35 84,3 91,7 9,0 7,8
Thread milling
T32-PN01B03-9X1.25-61R 10139480 M9 1,25 9.00X7.00 3 B
0.224 0.787 1.378 3.319 3.610 0.354 0.307
6,84 20,0 39 93,16 101,8 10,0 8,5
T32-PN01B03-10X1.5-61R 10139481 M10 1,5 10.00X8.00 3 B
0.269 0.787 1.535 3.668 4.008 0.394 0.335
Thread tapping
Annex
305
www.secotools.com
Thread tapping
T32-PNB
Through holes – Metric coarse threads, 6G
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
8,01 24,0 83 101,99 110,0 9,0 10,2
T32-PN01B06-12X1.75-61R 10139564 M12 1,75 9.00X7.00 3 B
0.315 0.945 3.268 4.015 4.331 0.354 0.402
Mini-Shaft™
9,24 32,0 68 100,76 110,0 12,0 14,0

T32-PN01B06-16X2-61R 10139565 M16 2,0 12.00X9.00 3 B
0.364 1.260 2.677 3.967 4.331 0.472 0.551
11,58 32,0 95 128,42 140,0 16,0 17,5
T32-PN01B06-20X2.5-61R 10139566 M20 2,5 16.00X12.00 4 B
0.456 1.260 3.740 5.056 5.512 0.630 0.689
13,68 38,0 113 146,32 160,0 18,0 21,0
T32-PN01B06-24X3-61R 10139567 M24 3,0 18.00X14.50 4 B
0.539 1.496 4.449 5.761 6.299 0.709 0.827
Thread milling
Thread tapping
Annex
306
www.secotools.com
Thread tapping
T32-PNB
Through holes – Metric coarse threads, left hand thread
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
2,2 10,0 18 53,8 57,2 3,5 2,5
T32-PN01B03-3X0.5-63L 10139466 M3 0,5 3.50X2.70 3 B
0.087 0.394 0.709 2.118 2.252 0.138 0.098
Mini-Shaft™
3,3 12,0 21 59,7 64,6 4,5 3,3
T32-PN01B03-4X0.7-63L 10139467 M4 0,7 4.50X3.40 3 B
0.130 0.472 0.827 2.350 2.543 0.177 0.130
3,6 14,0 25 66,4 72,0 6,0 4,2
T32-PN01B03-5X0.8-63L 10139468 M5 0,8 6.00X4.90 3 B
0.142 0.551 0.984 2.614 2.835 0.236 0.165
4,4 18,0 30 75,6 82,4 6,0 5,0
T32-PN01B03-6X1-63L 10139469 M6 1,0 6.00X4.90 3 B
0.173 0.709 1.181 2.976 3.244 0.236 0.197
4,4 18,0 30 75,6 82,9 7,0 6,0
T32-PN01B03-7X1-63L 10139470 M7 1,0 7.00X5.50 3 B
0.173 0.709 1.181 2.976 3.264 0.276 0.236
5,4 20,0 35 84,6 93,3 8,0 6,8
T32-PN01B03-8X1.25-63L 10139471 M8 1,25 8.00X6.20 3 B
0.213 0.787 1.378 3.331 3.673 0.315 0.268
5,7 20,0 35 84,3 91,7 9,0 7,8
Thread milling
T32-PN01B03-9X1.25-63L 10139472 M9 1,25 9.00X7.00 3 B
0.224 0.787 1.378 3.319 3.610 0.354 0.307
6,8 20,0 39 93,2 101,8 10,0 8,5
T32-PN01B03-10X1.5-63L 10139473 M10 1,5 10.00X8.00 3 B
0.268 0.787 1.535 3.669 4.008 0.394 0.335
Thread tapping
Annex
307
www.secotools.com
Thread tapping
T32-PNB
Through holes – Metric coarse threads, left hand thread
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
8,01 24,0 83 101,99 110,0 9,0 10,2
T32-PN01B06-12X1.75-63L 10139560 M12 1,75 9.00X7.00 3 B
0.315 0.945 3.268 4.015 4.331 0.354 0.402
Mini-Shaft™
9,24 32,0 68 100,76 110,0 12,0 14,0

T32-PN01B06-16X2-63L 10139561 M16 2,0 12.00X9.00 3 B
0.364 1.260 2.677 3.967 4.331 0.472 0.551
11,58 32,0 95 128,42 140,0 16,0 17,5
T32-PN01B06-20X2.5-63L 10139562 M20 2,5 16.00X12.00 4 B
0.456 1.260 3.740 5.056 5.512 0.630 0.689
13,68 38,0 113 146,32 160,0 18,0 21,0
T32-PN01B06-24X3-63L 10139563 M24 3,0 18.00X14.50 4 B
0.539 1.496 4.449 5.761 6.299 0.709 0.827
Thread milling
Thread tapping
Annex
308
www.secotools.com
Thread tapping
T32-PNB
Through holes – MF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
4,41 20,0 35 85,59 93,3 8,0 7,0
T32-PN02B03-8X1-63R 10139449 MF8X1.0 1,0 8.00X6.20 3 B
0.174 0.787 1.378 3.370 3.673 0.315 0.276
Mini-Shaft™
4,77 20,0 35 85,23 91,8 10,0 9,0
T32-PN02B03-10X1-63R 10139450 MF10X1.0 1,0 10.00X8.00 3 B
0.188 0.787 1.378 3.356 3.614 0.394 0.354
5,8 20,0 39 94,2 101,8 10,0 8,8
T32-PN02B03-10X1.25-63R 10139451 MF10X1.25 1,25 10.00X8.00 3 B
0.228 0.787 1.535 3.709 4.008 0.394 0.346
Thread milling
Thread tapping
Annex
309
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
4,67 20,0 67 85,33 90,0 6,0 7,0
T32-PN02B05-8X1-63R 10139507 MF8X1.0 1,0 6.00X4.90 3 B
0.184 0.787 2.638 3.359 3.543 0.236 0.276
Mini-Shaft™
3,73 18,0 67 86,27 90,0 7,0 9,2

T32-PN02B05-10X0.75-63R 10139508 MF10X0.75 0,75 7.00X5.50 3 B
0.147 0.709 2.638 3.396 3.543 0.276 0.362
4,79 20,0 67 85,21 90,0 7,0 9,0
T32-PN02B05-10X1-63R 10139509 MF10X1.0 1,0 7.00X5.50 3 B
0.189 0.787 2.638 3.355 3.543 0.276 0.354
5,8 20,0 77 94,2 100,0 7,0 8,8
T32-PN02B05-10X1.25-63R 10139510 MF10X1.25 1,25 7.00X5.50 3 B
0.228 0.787 3.031 3.709 3.937 0.276 0.346
4,89 20,0 73 95,11 100,0 9,0 11,0
T32-PN02B05-12X1-63R 10139511 MF12X1.0 1,0 9.00X7.00 3 B
0.193 0.787 2.874 3.744 3.937 0.354 0.433
5,94 20,0 73 94,06 100,0 9,0 10,8
T32-PN02B05-12X1.25-63R 10139512 MF12X1.25 1,25 9.00X7.00 3 B
0.234 0.787 2.874 3.703 3.937 0.354 0.425
6,97 20,0 73 93,03 100,0 9,0 10,5
Thread milling
T32-PN02B05-12X1.5-63R 10139513 MF12X1.5 1,5 9.00X7.00 3 B

0.274 0.787 2.874 3.663 3.937 0.354 0.413
4,99 20,0 71 95,01 100,0 11,0 13,0
T32-PN02B05-14X1-63R 10139514 MF14X1.0 1,0 11.00X9.00 3 B
0.196 0.787 2.795 3.741 3.937 0.433 0.512
6,04 20,0 71 93,96 100,0 11,0 12,8
T32-PN02B05-14X1.25-63R 10139515 MF14X1.25 1,25 11.00X9.00 3 B
0.238 0.787 2.795 3.699 3.937 0.433 0.504
7,07 20,0 71 92,93 100,0 11,0 12,5
T32-PN02B05-14X1.5-63R 10139516 MF14X1.5 1,5 11.00X9.00 3 B
0.278 0.787 2.795 3.659 3.937 0.433 0.492
5,09 20,0 58 94,91 100,0 12,0 15,0
T32-PN02B05-16X1-63R 10139517 MF16X1.0 1,0 12.00X9.00 3 B
0.200 0.787 2.283 3.737 3.937 0.472 0.591
7,17 20,0 58 92,83 100,0 12,0 14,5
T32-PN02B05-16X1.5-63R 10139518 MF16X1.5 1,5 12.00X9.00 3 B
0.282 0.787 2.283 3.655 3.937 0.472 0.571
Thread tapping
7,27 24,0 66 102,73 110,0 14,0 16,5

T32-PN02B05-18X1.5-63R 10139519 MF18X1.5 1,5 14.00X11.00 4 B
0.286 0.945 2.598 4.044 4.331 0.551 0.650
9,34 27,0 81 115,66 125,0 14,0 16,0
T32-PN02B05-18X2-63R 10139520 MF18X2.0 2,0 14.00X11.00 4 B
0.368 1.063 3.189 4.554 4.921 0.551 0.630
7,47 24,0 80 117,53 125,0 16,0 18,5
T32-PN02B05-20X1.5-63R 10139521 MF20X1.5 1,5 16.00X12.00 4 B
0.294 0.945 3.150 4.627 4.921 0.630 0.728
9,54 27,0 95 130,46 140,0 16,0 18,0
T32-PN02B05-20X2-63R 10139522 MF20X2.0 2,0 16.00X12.00 4 B
0.376 1.063 3.740 5.136 5.512 0.630 0.709
7,67 24,0 78 117,33 125,0 18,0 20,5
T32-PN02B05-22X1.5-63R 10139523 MF22X1.5 1,5 18.00X14.50 4 B
0.302 0.945 3.071 4.619 4.921 0.709 0.807
9,74 27,0 93 130,26 140,0 18,0 20,0
T32-PN02B05-22X2-63R 10139524 MF22X2.0 2,0 18.00X14.50 4 B
0.383 1.063 3.661 5.128 5.512 0.709 0.787
Annex
7,5 27,0 93 132,5 140,0 18,0 22,5

T32-PN02B05-24X1.5-63R 10139525 MF24X1.5 1,5 18.00X14.50 4 B
0.295 1.063 3.661 5.217 5.512 0.709 0.886
9,57 27,0 93 130,43 140,0 18,0 22,0
T32-PN02B05-24X2-63R 10139526 MF24X2.0 2,0 18.00X14.50 4 B
0.377 1.063 3.661 5.135 5.512 0.709 0.866
7,7 27,0 77 132,3 140,0 20,0 25,5
T32-PN02B05-27X1.5-63R 10139527 MF27X1.5 1,5 20.00X16.00 4 B
0.303 1.063 3.031 5.209 5.512 0.787 1.004
310
www.secotools.com
Thread tapping
mm
Thread turning
9,77 27,0 77 130,23 140,0 20,0 25,0
T32-PN02B05-27X2-63R 10139528 MF27X2.0 2,0 20.00X16.00 4 B
0.385 1.063 3.031 5.127 5.512 0.787 0.984
7,7 27,0 85 142,3 150,0 22,0 28,5
T32-PN02B05-30X1.5-63R 10139529 MF30X1.5 1,5 22.00X18.00 4 B
0.303 1.063 3.346 5.602 5.906 0.866 1.122
9,77 27,0 85 140,23 150,0 22,0 28,0
T32-PN02B05-30X2-63R 10139530 MF30X1.0 2,0 22.00X18.00 4 B
0.385 1.063 3.346 5.521 5.906 0.866 1.102
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
311
www.secotools.com
Thread tapping
T32-PNB
Through holes – UNC threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
• Thread tolerance class: 2B
TPI
2,845 2,81 10,0 18 53,19 56,0 3,5 2.35
T32-PN08B03-4-40-21R 10139452 UNC4-40 40.0 3.50X2.70 3 B
0.112 0.111 0.394 0.709 2.094 2.205 0.138 0.093
Mini-Shaft™
3,175 2,92 10,0 18 53,08 57,2 3,5 2.65

T32-PN08B03-5-40-21R 10139453 UNC5-40 40.0 3.50X2.70 3 B
0.125 0.115 0.394 0.709 2.090 2.252 0.138 0.104
3,505 3,71 12,0 20 52,29 57,4 4,0 2.85
T32-PN08B03-6-32-21R 10139454 UNC6-32 32.0 4.00X3.00 3 B
0.138 0.146 0.472 0.787 2.059 2.260 0.157 0.112
4,166 3,59 12,0 21 59,41 64,6 4,5 3.5
T32-PN08B03-8-32-21R 10139455 UNC8-32 32.0 4.50X3.40 3 B
0.164 0.141 0.472 0.827 2.339 2.543 0.177 0.138
4,826 4,82 14,0 25 65,18 72,0 6,0 3.9
T32-PN08B03-10-24-21R 10139456 UNC10-24 24.0 6.00X4.90 3 B
0.190 0.190 0.551 0.984 2.566 2.835 0.236 0.154
5,486 4,69 18,0 30 75,31 82,2 6,0 4.5
T32-PN08B03-12-24-21R 10139457 UNC12-24 24.0 6.00X4.90 3 B
0.216 0.185 0.709 1.181 2.965 3.236 0.236 0.177
6,35 5,6 18,0 32 74,4 82,4 7,0 5.1
Thread milling
T32-PN08B03-1/4-20-21R 10139458 UNC1/4-20 20.0 7.00X5.50 3 B

0.250 0.220 0.709 1.260 2.929 3.244 0.276 0.201
7,937 6,26 20,0 35 83,74 93,3 8,0 6.6
T32-PN08B03-5/16-18-21R 10139459 UNC5/16-18 18.0 8.00X6.20 3 B
0.312 0.246 0.787 1.378 3.297 3.673 0.315 0.260
9,525 7,28 20,0 39 92,72 100,0 10,0 8.0
T32-PN08B03-3/8-16-21R 10139460 UNC3/8-16 16.0 10.00X8.00 3 B
0.375 0.287 0.787 1.535 3.650 3.937 0.394 0.315
Thread tapping
Annex
312
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
11,112 8,27 22,0 76 91,73 100,0 8,0 9,3
T32-PN08B06-7/16-14-21R 10139531 UNC7/16-14 14.0 8.00X6.20 3 B
0.437 0.326 0.866 2.992 3.611 3.937 0.315 0.366
Mini-Shaft™
12,7 9,01 24,0 83 100,99 110,0 9,0 10,7
T32-PN08B06-1/2-13-21R 10139540 UNC1/2-13 13.0 9.00X7.00 3 B
0.500 0.355 0.945 3.268 3.976 4.331 0.354 0.421
14,287 9,76 25,0 81 100,24 110,0 11,0 12,3
T32-PN08B06-9/16-12-21R 10139533 UNC9/16-12 12.0 11.00X9.00 3 B
0.562 0.384 0.984 3.189 3.946 4.331 0.433 0.484
15,875 10,51 32,0 68 99,49 110,0 12,0 13,5
T32-PN08B06-5/8-11-21R 10139534 UNC5/8-11 11.0 12.00X9.00 3 B
0.625 0.414 1.260 2.677 3.917 4.331 0.472 0.531
19,05 11,55 32,0 81 113,45 125,0 14,0 16,5
T32-PN08B06-3/4-10-21R 10139535 UNC3/4-10 10.0 14.00X11.00 4 B
0.750 0.455 1.260 3.189 4.467 4.921 0.551 0.650
22,225 13,04 32,0 93 126,96 140,0 18,0 19,5
T32-PN08B06-7/8-9-21R 10139536 UNC7/8-9 9.0 18.00X14.50 4 B
0.875 0.513 1.260 3.661 4.998 5.512 0.709 0.768
25,4 14,86 38,0 97 145,14 160,0 20,0 22,25
Thread milling
T32-PN08B06-1-8-21R 10139537 UNC1-8 8.0 20.00X16.00 4 B
1.000 0.585 1.496 3.819 5.714 6.299 0.787 0.876
28,575 16,48 45,0 115 163,52 180,0 22,0 25,0
T32-PN08B06-1_1/8-7-21R 10139756 UNC1 1/8-7 7.0 22.00X18.00 4 B
1.125 0.649 1.772 4.528 6.438 7.087 0.866 0.984
31,75 16,74 45,0 115 163,26 180,0 22,0 28,0
T32-PN08B06-1_1/4-7-21R 10139538 UNC1 1/4-7 7.0 22.00X18.00 4 B
1.250 0.659 1.772 4.528 6.428 7.087 0.866 1.102
34,925 19,04 50,0 131 180,96 200,0 28,0 30,75
T32-PN08B06-1_3/8-6-21R 10139532 UNC1 3/8-6 6.0 28.00X22.00 4 B
1.375 0.750 1.969 5.157 7.124 7.874 1.102 1.211
38,1 19,3 55,0 131 180,7 200,0 28,0 34,0
T32-PN08B06-1_1/2-6-21R 10139539 UNC1 1/2-6 6.0 28.00X22.00 4 B
1.500 0.760 2.165 5.157 7.114 7.874 1.102 1.339
Thread tapping
Annex
313
www.secotools.com
Thread tapping
T32-PNB
Through holes – UNF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
4,826 3,8 14,0 25 66,2 72,0 6,0 4,1
T32-PN09B03-10-32-21R 10139461 UNF10-32 32.0 6.00X4.90 3 B
0.190 0.150 0.551 0.984 2.606 2.835 0.236 0.161
Mini-Shaft™
5,486 4,01 18,0 30 75,99 82,4 6,0 4,6

T32-PN09B03-12-28-21R 10139462 UNF12-28 28.0 6.00X4.90 3 B
0.216 0.158 0.709 1.181 2.992 3.244 0.236 0.181
6,35 4,24 18,0 30 75,76 82,4 7,0 5,5
T32-PN09B03-1/4-28-21R 10139463 UNF1/4-28 28.0 7.00X5.50 3 B
0.250 0.167 0.709 1.181 2.983 3.244 0.276 0.217
7,937 4,89 20,0 35 85,11 93,3 8,0 6,9
T32-PN09B03-5/16-24-21R 10139464 UNF5/16-24 24.0 8.00X6.20 3 B
0.312 0.193 0.787 1.378 3.351 3.673 0.315 0.272
9,525 5,22 20,0 35 84,78 90,0 10,0 8,5
T32-PN09B03-3/8-24-21R 10139465 UNF3/8-24 24.0 10.00X8.00 3 B
0.375 0.206 0.787 1.378 3.338 3.543 0.394 0.335
Thread milling
Thread tapping
Annex
314
www.secotools.com
Thread tapping
T32-PNB
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
11,112 5,88 20,0 76 94,12 100,0 8,0 9,9
T32-PN09B05-7/16-20-21R 10139542 UNF7/16-20 20.0 8.00X6.20 3 B
0.437 0.231 0.787 2.992 3.706 3.937 0.315 0.390
Mini-Shaft™
12,7 6,28 20,0 73 93,72 100,0 9,0 11,5
T32-PN09B05-1/2-20-21R 10139551 UNF1/2-20 20.0 9.00X7.00 3 B
0.500 0.247 0.787 2.874 3.690 3.937 0.354 0.453
14,287 6,69 20,0 71 93,31 100,0 11,0 13,0
T32-PN09B05-9/16-18-21R 10139544 UNF9/16-18 18.0 11.00X9.00 3 B
0.562 0.263 0.787 2.795 3.674 3.937 0.433 0.512
15,875 6,76 20,0 58 93,24 100,0 12,0 14,5
T32-PN09B05-5/8-18-21R 10139545 UNF5/8-18 18.0 12.00X9.00 3 B
0.625 0.266 0.787 2.283 3.671 3.937 0.472 0.571
19,05 7,81 24,0 66 102,19 110,0 14,0 17,5
T32-PN09B05-3/4-16-21R 10139546 UNF3/4-16 16.0 14.00X11.00 4 B
0.750 0.307 0.945 2.598 4.023 4.331 0.551 0.689
22,225 8,96 24,0 78 116,04 125,0 18,0 20,5
T32-PN09B05-7/8-14-21R 10139547 UNF7/8-14 14.0 18.00X14.50 4 B
0.875 0.353 0.945 3.071 4.569 4.921 0.709 0.807
25,4 10,44 27,0 93 129,56 140,0 18,0 23,3
Thread milling
T32-PN09B05-1-12-21R 10139548 UNF1-12 12.0 18.00X14.50 4 B
1.000 0.411 1.063 3.661 5.101 5.512 0.709 0.917
28,575 10,37 27,0 85 139,63 150,0 22,0 26,5
T32-PN09B05-1_1/8-12-21R 10139757 UNF1 1/8-12 12.0 22.00X18.00 4 B
1.125 0.408 1.063 3.346 5.497 5.906 0.866 1.043
31,75 10,29 27,0 85 139,71 150,0 22,0 29,5
T32-PN09B05-1_1/4-12-21R 10139549 UNF1 1/4-12 12.0 22.00X18.00 4 B
1.250 0.405 1.063 3.346 5.500 5.906 0.866 1.161
34,925 10,55 30,0 101 159,45 170,0 28,0 32,8
T32-PN09B05-1_3/8-12-21R 10139543 UNF1 3/8-12 12.0 28.00X22.00 4 B
1.375 0.415 1.181 3.976 6.278 6.693 1.102 1.291
38,1 10,48 30,0 101 159,52 170,0 28,0 36,0
T32-PN09B05-1_1/2-12-21R 10139550 UNF1 1/2-12 12.0 28.00X22.00 4 B
1.500 0.413 1.181 3.976 6.280 6.693 1.102 1.417
Thread tapping
Annex
315
www.secotools.com
Thread tapping
T32-PNB
Through holes – G threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
9,728 4,76 18,0 67 85,24 90,0 7,0 8,8
T32-PN21B09-1/8-28-11R 10139552 G1/8-28 28.0 7.00X5.50 3 B
0.383 0.187 0.709 2.638 3.356 3.543 0.276 0.346
Mini-Shaft™
13,157 6,77 22,0 71 93,23 100,0 11,0 11,8

T32-PN21B09-1/4-19-11R 10139553 G1/4-19 19.0 11.00X9.00 3 B
0.518 0.267 0.866 2.795 3.670 3.937 0.433 0.465
16,662 6,89 22,0 58 93,11 100,0 12,0 15,25
T32-PN21B09-3/8-19-11R 10139554 G3/8-19 19.0 12.00X9.00 4 B
0.656 0.271 0.866 2.283 3.666 3.937 0.472 0.600
20,955 9,22 25,0 80 115,78 125,0 16,0 19,0
T32-PN21B09-1/2-14-11R 10139555 G1/2-14 14.0 16.00X12.00 4 B
0.825 0.363 0.984 3.150 4.558 4.921 0.630 0.748
22,911 9,4 25,0 78 115,6 125,0 18,0 21,0
T32-PN21B09-5/8-14-11R 10139556 G5/8-14 14.0 18.00X14.50 4 B
0.902 0.370 0.984 3.071 4.551 4.921 0.709 0.827
26,441 9,36 28,0 77 130,64 140,0 20,0 24,5
T32-PN21B09-3/4-14-11R 10139557 G3/4-14 14.0 20.00X16.00 4 B
1.041 0.369 1.102 3.031 5.143 5.512 0.787 0.965
30,201 9,03 30,0 85 140,97 150,0 22,0 28,25
Thread milling
T32-PN21B09-7/8-14-11R 10139558 G7/8-14 14.0 22.00X18.00 4 B

1.189 0.356 1.181 3.346 5.550 5.906 0.866 1.112
33,249 11,49 32,0 93 148,51 160,0 25,0 30,75
T32-PN21B09-1-11-11R 10139559 G1-11 11.0 25.00X20.00 4 B
1.309 0.452 1.260 3.661 5.847 6.299 0.984 1.211
Thread tapping
Annex
316
www.secotools.com
Thread tapping
T32-R40NC-micro
Blind holes – Metric coarse threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 40°
mm
0,59 6,0 13 39,41 40,9 2,5 0,75
T32-R40N01C03-1X0.25-41R 10139129 M1 0,25 2.50X2.10 2 C
Mini-Shaft™
0.023 0.236 0.512 1.552 1.610 0.098 0.030
0,59 6,0 13 39,41 41,0 2,5 0,85
T32-R40N01C03-1.1X0.25-41R 10139130 M1.1 0,25 2.50X2.10 2 C
0.023 0.236 0.512 1.552 1.614 0.098 0.033
0,59 6,0 13 39,41 41,1 2,5 0,95
T32-R40N01C03-1.2X0.25-41R 10139131 M1.2 0,25 2.50X2.10 2 C
0.023 0.236 0.512 1.552 1.618 0.098 0.037
0,69 8,0 13 39,31 41,3 2,5 1,1
T32-R40N01C03-1.4X0.3-41R 10139132 M1.4 0,3 2.50X2.10 2 C
0.027 0.315 0.512 1.548 1.626 0.098 0.043
Thread milling
Thread tapping
Annex
317
www.secotools.com
Thread tapping
T32-R40NC-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
0,8 8,0 13 39,2 41,4 2,5 1,25
T32-R40N01C03-1.6X0.35-63R 10139133 M1.6 0,35 2.50X2.10 2 C
Mini-Shaft™
0.031 0.315 0.512 1.543 1.630 0.098 0.049

0,8 8,0 13 39,2 41,5 2,5 1,35
T32-R40N01C03-1.7X0.35-63R 10139134 M1.7 0,35 2.50X2.10 2 C
0.031 0.315 0.512 1.543 1.634 0.098 0.053
0,8 8,0 13 39,2 41,6 2,5 1,45
T32-R40N01C03-1.8X0.35-63R 10139135 M1.8 0,35 2.50X2.10 2 C
0.031 0.315 0.512 1.543 1.638 0.098 0.057
1,03 10,0 13 43,974 46,3 2,8 1,6
T32-R40N01C03-2X0.4-63R 10139136 M2 0,4 2.80X2.10 2 C
0.041 0.394 0.512 1.731 1.823 0.110 0.063
1,15 10,0 13 43,847 46,3 2,8 1,75
T32-R40N01C03-2.2X0.45-63R 10139137 M2.2 0,45 2.80X2.10 2 C
0.045 0.394 0.512 1.726 1.823 0.110 0.069
1,05 10,0 13 43,948 46,3 2,8 1,9
T32-R40N01C03-2.3X0.4-63R 10139138 M2.3 0,4 2.80X2.10 2 C
0.041 0.394 0.512 1.730 1.823 0.110 0.075
Thread milling
1,06 5,0 14 48,94 51,7 2,8 2,05

T32-R40N01C03-2.5X0.45-63R 10139139 M2.5 0,45 2.80X2.10 2 C
0.042 0.197 0.551 1.927 2.035 0.110 0.081
1,15 5,0 14 48,847 51,7 2,8 2,15
T32-R40N01C03-2.6X0.45-63R 10139140 M2.6 0,45 2.80X2.10 2 C
0.045 0.197 0.551 1.923 2.035 0.110 0.085
Thread tapping
Annex
318
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
1,2 5,0 18 54,8 57,2 3,5 2,5
T32-R40N01C03-3X0.5-63R 10139141 M3 0,5 3.50X2.70 3 C
Mini-Shaft™
0.047 0.197 0.709 2.157 2.252 0.138 0.098
1,36 6,0 20 54,64 57,4 4,0 2,9
T32-R40N01C03-3.5X0.6-63R 10139142 M3.5 0,6 4.00X3.00 3 C
0.054 0.236 0.787 2.151 2.260 0.157 0.114
1,54 7,0 21 61,46 64,6 4,5 3,3
T32-R40N01C03-4X0.7-63R 10139143 M4 0,7 4.50X3.40 3 C
0.061 0.276 0.827 2.420 2.543 0.177 0.130
1,9 8,0 25 68,1 72,0 6,0 4,2
T32-R40N01C03-5X0.8-63R 10139144 M5 0,8 6.00X4.90 3 C
0.075 0.315 0.984 2.681 2.835 0.236 0.165
2,28 10,0 30 77,72 82,4 6,0 5,0
T32-R40N01C03-6X1-63R 10139145 M6 1,0 6.00X4.90 3 C
0.090 0.394 1.181 3.060 3.244 0.236 0.197
2,28 10,0 30 77,72 82,9 7,0 6,0
T32-R40N01C03-7X1-63R 10139146 M7 1,0 7.00X5.50 3 C
0.090 0.394 1.181 3.060 3.264 0.276 0.236
Thread milling
3,11 13,0 35 86,89 91,7 8,0 6,8
T32-R40N01C03-8X1.25-63R 10139147 M8 1,25 8.00X6.20 3 C
0.122 0.512 1.378 3.421 3.610 0.315 0.268
3,11 13,0 35 86,89 91,7 9,0 7,8
T32-R40N01C03-9X1.25-63R 10139148 M9 1,25 9.00X7.00 3 C
0.122 0.512 1.378 3.421 3.610 0.354 0.307
3,76 15,0 39 96,24 101,8 10,0 8,5
T32-R40N01C03-10X1.5-63R 10139149 M10 1,5 10.00X8.00 3 C
0.148 0.591 1.535 3.789 4.008 0.394 0.335
Thread tapping
Annex
319
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL DCONMS
TD
FHA
CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
1,17 5,0 36 54,83 57,2 2,2 2,5
T32-R40N01C06-3X0.5-63R 10139568 M3 0,5 2.20X1.80 3 C
Mini-Shaft™
0.046 0.197 1.417 2.159 2.252 0.087 0.098

1,72 8,0 43 61,28 64,6 2,8 3,3
T32-R40N01C06-4X0.7-63R 10139570 M4 0,7 2.80X2.10 3 C
0.068 0.315 1.693 2.413 2.543 0.110 0.130
1,9 10,0 49 68,1 72,0 3,5 4,2
T32-R40N01C06-5X0.8-63R 10139571 M5 0,8 3.50X2.70 3 C
0.075 0.394 1.929 2.681 2.835 0.138 0.165
2,28 12,0 59 77,72 82,4 4,5 5,0
T32-R40N01C06-6X1-63R 10139572 M6 1,0 4.50X3.40 3 C
0.090 0.472 2.323 3.060 3.244 0.177 0.197
3,11 15,0 67 86,89 90,0 6,0 6,8
T32-R40N01C06-8X1.25-63R 10139574 M8 1,25 6.00X4.90 3 C
0.122 0.591 2.638 3.421 3.543 0.236 0.268
3,21 15,0 67 86,79 90,0 7,0 7,8
T32-R40N01C06-9X1.25-63R 10139575 M9 1,25 7.00X5.50 3 C
0.126 0.591 2.638 3.417 3.543 0.276 0.307
Thread milling
3,76 17,0 77 96,24 100,0 7,0 8,5

T32-R40N01C06-10X1.5-63R 10139576 M10 1,5 7.00X5.50 3 C
0.148 0.669 3.031 3.789 3.937 0.276 0.335
4,41 18,0 83 105,59 110,0 9,0 10,2
T32-R40N01C06-12X1.75-63R 10139577 M12 1,75 9.00X7.00 3 C
0.174 0.709 3.268 4.157 4.331 0.354 0.402
5,07 20,0 81 104,93 110,0 11,0 12,0
T32-R40N01C06-14X2-63R 10139578 M14 2,0 11.00X9.00 4 C
0.200 0.787 3.189 4.131 4.331 0.433 0.472
5,15 20,0 68 104,85 110,0 12,0 14,0
T32-R40N01C06-16X2-63R 10139579 M16 2,0 12.00X9.00 4 C
0.203 0.787 2.677 4.128 4.331 0.472 0.551
6,31 25,0 81 118,69 125,0 14,0 15,5
T32-R40N01C06-18X2.5-63R 10139580 M18 2,5 14.00X11.00 4 C
0.248 0.984 3.189 4.673 4.921 0.551 0.610
6,51 25,0 95 133,49 140,0 16,0 17,5
Thread tapping
T32-R40N01C06-20X2.5-63R 10139581 M20 2,5 16.00X12.00 4 C

0.256 0.984 3.740 5.256 5.512 0.630 0.689
6,51 25,0 93 133,49 140,0 18,0 19,5
T32-R40N01C06-22X2.5-63R 10139582 M22 2,5 18.00X14.50 4 C
0.256 0.984 3.661 5.256 5.512 0.709 0.768
7,81 30,0 113 152,19 160,0 18,0 21,0
T32-R40N01C06-24X3-63R 10139583 M24 3,0 18.00X14.50 4 C
0.307 1.181 4.449 5.992 6.299 0.709 0.827
7,81 30,0 97 152,19 160,0 20,0 24,0
T32-R40N01C06-27X3-63R 10139584 M27 3,0 20.00X16.00 4 C
0.307 1.181 3.819 5.992 6.299 0.787 0.945
8,88 35,0 115 171,12 180,0 22,0 26,5
T32-R40N01C06-30X3.5-63R 10139585 M30 3,5 22.00X18.00 4 C
0.350 1.378 4.528 6.737 7.087 0.866 1.043
8,88 35,0 113 171,12 180,0 25,0 29,5
T32-R40N01C06-33X3.5-63R 10139586 M33 3,5 25.00X20.00 4 C
0.350 1.378 4.449 6.737 7.087 0.984 1.161
9,94 40,0 131 190,06 200,0 28,0 32,0
T32-R40N01C06-36X4-63R 10139587 M36 4,0 28.00X22.00 4 C
0.391 1.575 5.157 7.483 7.874 1.102 1.260
Annex
9,94 40,0 102 190,06 200,0 32,0 35,0

T32-R40N01C06-39X4-63R 10139588 M39 4,0 32.00X24.00 4 C
0.391 1.575 4.016 7.483 7.874 1.260 1.378
11,01 45,0 102 188,99 200,0 32,0 37,5
T32-R40N01C06-42X4.5-63R 10139589 M42 4,5 32.00X24.00 5 C
0.433 1.772 4.016 7.441 7.874 1.260 1.476
320
www.secotools.com
Thread tapping
mm
Thread turning
11,01 45,0 117 208,99 220,0 36,0 40,5
T32-R40N01C06-45X4.5-63R 10139590 M45 4,5 36.00X29.00 5 C
0.433 1.772 4.606 8.228 8.661 1.417 1.594
12,08 50,0 147 237,92 250,0 36,0 43,0
T32-R40N01C06-48X5-63R 10139591 M48 5,0 36.00X29.00 5 C
0.476 1.969 5.787 9.367 9.843 1.417 1.693
12,08 50,0 120 237,92 250,0 40,0 47,0
T32-R40N01C06-52X5-63R 10139592 M52 5,0 40.00X32.00 5 C
0.476 1.969 4.724 9.367 9.843 1.575 1.850
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
321
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL DCONMS
TD
FHA
THL CZCMS
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
1,17 5,0 18 98,83 101,2 3,5 2,5
T32-R40N01C04-3X0.5-63R 10139179 M3 0,5 3.50X2.70 3 C
Mini-Shaft™
0.046 0.197 0.709 3.891 3.984 0.138 0.098

1,45 7,0 21 123,55 126,6 4,5 3,3
T32-R40N01C04-4X0.7-63R 10139180 M4 0,7 4.50X3.40 3 C
0.057 0.276 0.827 4.864 4.984 0.177 0.130
1,9 8,0 25 138,1 142,0 6,0 4,2
T32-R40N01C04-5X0.8-63R 10139181 M5 0,8 6.00X4.90 3 C
0.075 0.315 0.984 5.437 5.591 0.236 0.165
2,28 10,0 30 157,72 162,4 6,0 5,0
T32-R40N01C04-6X1-63R 10139182 M6 1,0 6.00X4.90 3 C
0.090 0.394 1.181 6.209 6.394 0.236 0.197
Thread milling
Thread tapping
Annex
322
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL DCONMS
TD
FHA
CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
3,11 15,0 157 176,89 180,0 6,0 6,8
T32-R40N01C07-8X1.25-63R 10139183 M8 1,25 6.00X4.90 3 C
Mini-Shaft™
0.122 0.591 6.181 6.964 7.087 0.236 0.268
3,76 17,0 177 196,24 200,0 7,0 8,5
T32-R40N01C07-10X1.5-63R 10139185 M10 1,5 7.00X5.50 3 C
0.148 0.669 6.969 7.726 7.874 0.276 0.335
4,41 18,0 193 215,59 220,0 9,0 10,2
T32-R40N01C07-12X1.75-63R 10139186 M12 1,75 9.00X7.00 3 C
0.174 0.709 7.598 8.488 8.661 0.354 0.402
5,21 20,0 178 214,79 220,0 12,0 14,0
T32-R40N01C07-16X2-63R 10139187 M16 2,0 12.00X9.00 4 C
0.205 0.787 7.008 8.456 8.661 0.472 0.551
Thread milling
Thread tapping
Annex
323
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – Metric coarse threads, 6G
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
1,2 5,0 18 54,8 57,2 3,5 2,5
T32-R40N01C03-3X0.5-61R 10139173 M3 0,5 3.50X2.70 3 C
Mini-Shaft™
0.047 0.197 0.709 2.157 2.252 0.138 0.098

1,54 7,0 21 61,46 64,6 4,5 3,3
T32-R40N01C03-4X0.7-61R 10139174 M4 0,7 4.50X3.40 3 C
0.061 0.276 0.827 2.420 2.543 0.177 0.130
1,9 8,0 25 68,1 72,0 6,0 4,2
T32-R40N01C03-5X0.8-61R 10139175 M5 0,8 6.00X4.90 3 C
0.075 0.315 0.984 2.681 2.835 0.236 0.165
2,28 10,0 30 77,72 82,4 6,0 5,0
T32-R40N01C03-6X1-61R 10139176 M6 1,0 6.00X4.90 3 C
0.090 0.394 1.181 3.060 3.244 0.236 0.197
3,11 13,0 35 86,89 91,7 8,0 6,8
T32-R40N01C03-8X1.25-61R 10139177 M8 1,25 8.00X6.20 3 C
0.122 0.512 1.378 3.421 3.610 0.315 0.268
3,76 15,0 39 96,24 101,8 10,0 8,5
T32-R40N01C03-10X1.5-61R 10139178 M10 1,5 10.00X8.00 3 C
0.148 0.591 1.535 3.789 4.008 0.394 0.335
Thread milling
Thread tapping
Annex
324
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – Metric coarse threads, 6G
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
4,41 18,0 83 105,59 110,0 9,0 10,2
T32-R40N01C06-12X1.75-61R 10139649 M12 1,75 9.00X7.00 3 C
Mini-Shaft™
0.174 0.709 3.268 4.157 4.331 0.354 0.402
5,15 20,0 81 104,85 110,0 11,0 14,0
T32-R40N01C06-16X2-61R 10139650 M16 2,0 11.00X9.00 4 C
0.203 0.787 3.189 4.128 4.331 0.433 0.551
6,51 25,0 95 133,49 140,0 16,0 17,5
T32-R40N01C06-20X2.5-61R 10139651 M20 2,5 16.00X12.00 4 C
0.256 0.984 3.740 5.256 5.512 0.630 0.689
Thread milling
Thread tapping
Annex
325
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – Metric coarse threads, left hand thread
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
1,2 5,0 18 54,8 57,2 3,5 2,5
T32-L40N01C03-3X0.5-63L 10139167 M3 0,5 3.50X2.70 3 C
Mini-Shaft™
0.047 0.197 0.709 2.157 2.252 0.138 0.098

1,54 7,0 21 61,46 64,6 4,5 3,3
T32-L40N01C03-4X0.7-63L 10139168 M4 0,7 4.50X3.40 3 C
0.061 0.276 0.827 2.420 2.543 0.177 0.130
1,9 8,0 25 68,1 72,0 6,0 4,2
T32-L40N01C03-5X0.8-63L 10139169 M5 0,8 6.00X4.90 3 C
0.075 0.315 0.984 2.681 2.835 0.236 0.165
2,28 10,0 30 77,72 82,4 6,0 5,0
T32-L40N01C03-6X1-63L 10139170 M6 1,0 6.00X4.90 3 C
0.090 0.394 1.181 3.060 3.244 0.236 0.197
3,11 13,0 35 86,89 91,7 8,0 6,8
T32-L40N01C03-8X1.25-63L 10139171 M8 1,25 8.00X6.20 3 C
0.122 0.512 1.378 3.421 3.610 0.315 0.268
3,76 15,0 39 96,24 101,8 10,0 8,5
T32-L40N01C03-10X1.5-63L 10139172 M10 1,5 10.00X8.00 3 C
0.148 0.591 1.535 3.789 4.008 0.394 0.335
Thread milling
Thread tapping
Annex
326
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – Metric coarse threads, left hand thread
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
4,41 18,0 83 105,59 110,0 9,0 10,2
T32-L40N01C06-12X1.75-63L 10139645 M12 1,75 9.00X7.00 3 C
Mini-Shaft™
0.174 0.709 3.268 4.157 4.331 0.354 0.402
5,15 20,0 68 104,85 110,0 12,0 14,0
T32-L40N01C06-16X2-63L 10139646 M16 2,0 12.00X9.00 4 C
0.203 0.787 2.677 4.128 4.331 0.472 0.551
6,51 25,0 95 133,49 140,0 16,0 17,5
T32-L40N01C06-20X2.5-63L 10139647 M20 2,5 16.00X12.00 4 C
0.256 0.984 3.740 5.256 5.512 0.630 0.689
7,81 30,0 113 152,19 160,0 18,0 21,0
T32-L40N01C06-24X3-63L 10139648 M24 3,0 18.00X14.50 4 C
0.307 1.181 4.449 5.992 6.299 0.709 0.827
Thread milling
Thread tapping
Annex
327
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – MF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
2,58 13,0 35 87,42 91,7 8,0 7,0
T32-R40N02C03-8X1-63R 10139150 MF8X1.0 1,0 8.00X6.20 3 C
Mini-Shaft™
0.102 0.512 1.378 3.442 3.610 0.315 0.276

2,68 13,0 35 87,32 90,0 10,0 9,0
T32-R40N02C03-10X1-63R 10139151 MF10X1.0 1,0 10.00X8.00 3 C
0.106 0.512 1.378 3.438 3.543 0.394 0.354
3,21 15,0 39 96,79 101,8 10,0 8,8
T32-R40N02C03-10X1.25-63R 10139152 MF10X1.25 1,25 10.00X8.00 3 C
0.126 0.591 1.535 3.811 4.008 0.394 0.346
Thread milling
Thread tapping
Annex
328
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
mm
2,58 10,0 67 87,42 90,0 6,0 7,0
T32-R40N02C05-8X1-63R 10139593 MF8X1.0 1,0 6.00X4.90 3 C
Mini-Shaft™
0.102 0.394 2.638 3.442 3.543 0.236 0.276
2,13 10,0 67 87,87 90,0 7,0 9,2
T32-R40N02C05-10X0.75-63R 10139594 MF10X0.75 0,75 7.00X5.50 3 C
0.084 0.394 2.638 3.459 3.543 0.276 0.362
2,68 13,0 67 87,32 90,0 7,0 9,0
T32-R40N02C05-10X1-63R 10139595 MF10X1.0 1,0 7.00X5.50 3 C
0.106 0.512 2.638 3.438 3.543 0.276 0.354
3,21 15,0 77 96,79 100,0 7,0 8,8
T32-R40N02C05-10X1.25-63R 10139596 MF10X1.25 1,25 7.00X5.50 3 C
0.126 0.591 3.031 3.811 3.937 0.276 0.346
2,79 10,0 73 97,21 100,0 9,0 11,0
T32-R40N02C05-12X1-63R 10139597 MF12X1.0 1,0 9.00X7.00 3 C
0.110 0.394 2.874 3.827 3.937 0.354 0.433
3,34 15,0 73 96,66 100,0 9,0 10,8
T32-R40N02C05-12X1.25-63R 10139598 MF12X1.25 1,25 9.00X7.00 3 C
0.131 0.591 2.874 3.806 3.937 0.354 0.425
Thread milling
3,87 15,0 73 96,13 100,0 9,0 10,5
T32-R40N02C05-12X1.5-63R 10139599 MF12X1.5 1,5 9.00X7.00 3 C
0.152 0.591 2.874 3.785 3.937 0.354 0.413
2,89 10,0 71 97,11 100,0 11,0 13,0
T32-R40N02C05-14X1-63R 10139600 MF14X1.0 1,0 11.00X9.00 4 C
0.114 0.394 2.795 3.823 3.937 0.433 0.512
3,44 15,0 71 96,56 100,0 11,0 12,8
T32-R40N02C05-14X1.25-63R 10139601 MF14X1.25 1,25 11.00X9.00 4 C
0.135 0.591 2.795 3.802 3.937 0.433 0.504
3,97 15,0 71 96,03 100,0 11,0 12,5
T32-R40N02C05-14X1.5-63R 10139602 MF14X1.5 1,5 11.00X9.00 4 C
0.156 0.591 2.795 3.781 3.937 0.433 0.492
2,79 10,0 58 97,21 100,0 12,0 15,0
T32-R40N02C05-16X1-63R 10139603 MF16X1.0 1,0 12.00X9.00 4 C
0.110 0.394 2.283 3.827 3.937 0.472 0.591
4,07 15,0 58 95,93 100,0 12,0 14,5
Thread tapping
T32-R40N02C05-16X1.5-63R 10139604 MF16X1.5 1,5 12.00X9.00 4 C
0.160 0.591 2.283 3.777 3.937 0.472 0.571
4,17 17,0 66 105,83 110,0 14,0 16,5
T32-R40N02C05-18X1.5-63R 10139605 MF18X1.5 1,5 14.00X11.00 4 C
0.164 0.669 2.598 4.167 4.331 0.551 0.650
5,25 20,0 81 119,75 125,0 14,0 16,0
T32-R40N02C05-18X2-63R 10139606 MF18X2.0 2,0 14.00X11.00 4 C
0.207 0.787 3.189 4.715 4.921 0.551 0.630
4,37 17,0 80 120,63 125,0 16,0 18,5
T32-R40N02C05-20X1.5-63R 10139607 MF20X1.5 1,5 16.00X12.00 4 C
0.172 0.669 3.150 4.749 4.921 0.630 0.728
5,45 20,0 95 134,55 140,0 16,0 18,0
T32-R40N02C05-20X2-63R 10139608 MF20X2.0 2,0 16.00X12.00 4 C
0.215 0.787 3.740 5.297 5.512 0.630 0.709
4,37 17,0 78 120,63 125,0 18,0 20,5
T32-R40N02C05-22X1.5-63R 10139609 MF22X1.5 1,5 18.00X14.50 4 C
0.172 0.669 3.071 4.749 4.921 0.709 0.807
5,45 20,0 93 134,55 140,0 18,0 20,0
T32-R40N02C05-22X2-63R 10139610 MF22X2.0 2,0 18.00X14.50 4 C
0.215 0.787 3.661 5.297 5.512 0.709 0.787
Annex
4,39 20,0 93 135,61 140,0 18,0 22,5

T32-R40N02C05-24X1.5-63R 10139611 MF24X1.5 1,5 18.00X14.50 4 C
0.173 0.787 3.661 5.339 5.512 0.709 0.886
5,67 20,0 93 134,33 140,0 18,0 22,0
T32-R40N02C05-24X2-63R 10139612 MF24X2.0 2,0 18.00X14.50 4 C
0.223 0.787 3.661 5.289 5.512 0.709 0.866
329
www.secotools.com
Thread tapping
mm
Thread turning
4,59 20,0 77 135,41 140,0 20,0 25,5

T32-R40N02C05-27X1.5-63R 10139613 MF27X1.5 1,5 20.00X16.00 4 C
0.181 0.787 3.031 5.331 5.512 0.787 1.004
5,67 20,0 77 134,33 140,0 20,0 25,0
T32-R40N02C05-27X2-63R 10139614 MF27X2.0 2,0 20.00X16.00 4 C
0.223 0.787 3.031 5.289 5.512 0.787 0.984
4,19 22,0 85 145,81 150,0 22,0 28,5
T32-R40N02C05-30X1.5-63R 10139615 MF30X1.5 1,5 22.00X18.00 4 C
0.165 0.866 3.346 5.741 5.906 0.866 1.122
5,67 22,0 85 144,33 150,0 22,0 28,0
T32-R40N02C05-30X2-63R 10139616 MF30X1.0 2,0 22.00X18.00 4 C
0.223 0.866 3.346 5.682 5.906 0.866 1.102
MDT
Mini-Shaft™
Thread milling
Thread tapping
Annex
330
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – UNC threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
TPI
2,845 1,45 5,0 18 54,55 56,0 3,5 2,35
T32-R40N08C03-4-40-21R 10139153 UNC4-40 40.0 3.50X2.70 3 C
Mini-Shaft™
0.112 0.057 0.197 0.709 2.148 2.205 0.138 0.093
3,175 1,5 7,0 18 54,5 57,2 3,5 2,65
T32-R40N08C03-5-40-21R 10139154 UNC5-40 40.0 3.50X2.70 3 C
0.125 0.059 0.276 0.709 2.146 2.252 0.138 0.104
3,505 1,92 6,0 20 54,08 57,4 4,0 2,85
T32-R40N08C03-6-32-21R 10139155 UNC6-32 32.0 4.00X3.00 3 C
0.138 0.076 0.236 0.787 2.129 2.260 0.157 0.112
4,166 1,85 7,0 21 61,15 64,6 4,5 3,5
T32-R40N08C03-8-32-21R 10139156 UNC8-32 32.0 4.50X3.40 3 C
0.164 0.073 0.276 0.827 2.407 2.543 0.177 0.138
4,826 2,49 8,0 25 67,51 72,0 6,0 3,9
T32-R40N08C03-10-24-21R 10139157 UNC10-24 24.0 6.00X4.90 3 C
0.190 0.098 0.315 0.984 2.658 2.835 0.236 0.154
5,486 2,43 10,0 30 77,57 82,2 6,0 4,5
T32-R40N08C03-12-24-21R 10139158 UNC12-24 24.0 6.00X4.90 3 C
0.216 0.096 0.394 1.181 3.054 3.236 0.236 0.177
Thread milling
6,35 2,9 13,0 32 77,1 82,4 7,0 5,1
T32-R40N08C03-1/4-20-21R 10139159 UNC1/4-20 20.0 7.00X5.50 3 C
0.250 0.114 0.512 1.260 3.035 3.244 0.276 0.201
7,937 3,54 13,0 35 86,46 90,0 8,0 6,6
T32-R40N08C03-5/16-18-21R 10139160 UNC5/16-18 18.0 8.00X6.20 3 C
0.312 0.139 0.512 1.378 3.404 3.543 0.315 0.260
9,525 3,99 15,0 39 96,01 100,0 10,0 8,0
T32-R40N08C03-3/8-16-21R 10139161 UNC3/8-16 16.0 10.00X8.00 3 C
0.375 0.157 0.591 1.535 3.780 3.937 0.394 0.315
Thread tapping
Annex
331
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
TPI
11,112 4,6 15,0 76 95,4 100,0 8,0 9,3
T32-R40N08C06-7/16-14-21R 10139617 UNC7/16-14 14.0 8.00X6.20 3 C
Mini-Shaft™
0.437 0.181 0.591 2.992 3.756 3.937 0.315 0.366

12,7 4,94 18,0 83 105,06 110,0 9,0 10,7
T32-R40N08C06-1/2-13-21R 10139626 UNC1/2-13 13.0 9.00X7.00 4 C
0.500 0.194 0.709 3.268 4.136 4.331 0.354 0.421
14,287 5,37 20,0 81 104,63 110,0 11,0 12,3
T32-R40N08C06-9/16-12-21R 10139619 UNC9/16-12 12.0 11.00X9.00 4 C
0.562 0.211 0.787 3.189 4.119 4.331 0.433 0.484
15,875 5,81 22,0 68 104,19 110,0 12,0 13,5
T32-R40N08C06-5/8-11-21R 10139620 UNC5/8-11 11.0 12.00X9.00 4 C
0.625 0.229 0.866 2.677 4.102 4.331 0.472 0.531
19,05 6,78 25,0 81 118,22 125,0 14,0 16,5
T32-R40N08C06-3/4-10-21R 10139621 UNC3/4-10 10.0 14.00X11.00 4 C
0.750 0.267 0.984 3.189 4.654 4.921 0.551 0.650
22,225 7,27 30,0 93 132,73 140,0 18,0 19,5
T32-R40N08C06-7/8-9-21R 10139622 UNC7/8-9 9.0 18.00X14.50 4 C
0.875 0.286 1.181 3.661 5.226 5.512 0.709 0.768
Thread milling
25,4 8,32 30,0 97 151,68 160,0 20,0 22,25

T32-R40N08C06-1-8-21R 10139623 UNC1-8 8.0 20.00X16.00 4 C
1.000 0.328 1.181 3.819 5.972 6.299 0.787 0.876
28,575 9,17 37,0 115 170,83 180,0 22,0 25,0
T32-R40N08C06-1_1/8-7-21R 10139758 UNC1 1/8-7 7.0 22.00X18.00 4 C
1.125 0.361 1.457 4.528 6.726 7.087 0.866 0.984
31,75 9,3 37,0 115 170,7 180,0 22,0 28,0
T32-R40N08C06-1_1/4-7-21R 10139624 UNC1 1/4-7 7.0 22.00X18.00 4 C
1.250 0.366 1.457 4.528 6.720 7.087 0.866 1.102
34,925 10,5 40,0 131 189,5 200,0 28,0 30,75
T32-R40N08C06-1_3/8-6-21R 10139618 UNC1 3/8-6 6.0 28.00X22.00 4 C
1.375 0.413 1.575 5.157 7.461 7.874 1.102 1.211
38,1 10,63 40,0 131 189,37 200,0 28,0 34,0
T32-R40N08C06-1_1/2-6-21R 10139625 UNC1 1/2-6 6.0 28.00X22.00 4 C
1.500 0.419 1.575 5.157 7.456 7.874 1.102 1.339
Thread tapping
Annex
332
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – UNF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
TPI
4,826 1,96 8,0 25 68,04 72,0 6,0 4,1
T32-R40N09C03-10-32-21R 10139162 UNF10-32 32.0 6.00X4.90 3 C
Mini-Shaft™
0.190 0.077 0.315 0.984 2.679 2.835 0.236 0.161
5,486 2,07 10,0 30 77,93 82,4 6,0 4,6
T32-R40N09C03-12-28-21R 10139163 UNF12-28 28.0 6.00X4.90 3 C
0.216 0.081 0.394 1.181 3.068 3.244 0.236 0.181
6,35 2,19 10,0 30 77,81 82,4 7,0 5,5
T32-R40N09C03-1/4-28-21R 10139164 UNF1/4-28 28.0 7.00X5.50 3 C
0.250 0.086 0.394 1.181 3.063 3.244 0.276 0.217
7,937 2,83 13,0 35 87,17 90,0 8,0 6,9
T32-R40N09C03-5/16-24-21R 10139165 UNF5/16-24 24.0 8.00X6.20 3 C
0.312 0.111 0.512 1.378 3.432 3.543 0.315 0.272
9,525 2,91 15,0 35 87,09 90,0 10,0 8,5
T32-R40N09C03-3/8-24-21R 10139166 UNF3/8-24 24.0 10.00X8.00 3 C
0.375 0.115 0.591 1.378 3.429 3.543 0.394 0.335
Thread milling
Thread tapping
Annex
333
www.secotools.com
Thread tapping
T32-R40NC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
TPI
11,112 3,35 15,0 76 96,65 100,0 8,0 9,9
T32-R40N09C05-7/16-20-21R 10139627 UNF7/16-20 20.0 8.00X6.20 3 C
Mini-Shaft™
0.437 0.132 0.591 2.992 3.805 3.937 0.315 0.390

12,7 3,51 15,0 73 96,49 100,0 9,0 11,5
T32-R40N09C05-1/2-20-21R 10139636 UNF1/2-20 20.0 9.00X7.00 4 C
0.500 0.138 0.591 2.874 3.799 3.937 0.354 0.453
14,287 3,77 15,0 71 96,23 100,0 11,0 13,0
T32-R40N09C05-9/16-18-21R 10139629 UNF9/16-18 18.0 11.00X9.00 4 C
0.562 0.148 0.591 2.795 3.789 3.937 0.433 0.512
15,875 3,86 15,0 58 96,14 100,0 12,0 14,5
T32-R40N09C05-5/8-18-21R 10139630 UNF5/8-18 18.0 12.00X9.00 4 C
0.625 0.152 0.591 2.283 3.785 3.937 0.472 0.571
19,05 4,45 17,0 66 105,55 110,0 14,0 17,5
T32-R40N09C05-3/4-16-21R 10139631 UNF3/4-16 16.0 14.00X11.00 4 C
0.750 0.175 0.669 2.598 4.156 4.331 0.551 0.689
22,225 5,15 17,0 78 119,85 125,0 18,0 20,5
T32-R40N09C05-7/8-14-21R 10139632 UNF7/8-14 14.0 18.00X14.50 4 C
0.875 0.203 0.669 3.071 4.719 4.921 0.709 0.807
Thread milling
25,4 5,82 22,0 93 134,18 140,0 18,0 23,3

T32-R40N09C05-1-12-21R 10139633 UNF1-12 12.0 18.00X14.50 4 C
1.000 0.229 0.866 3.661 5.283 5.512 0.709 0.917
28,575 5,98 22,0 85 144,02 150,0 22,0 26,5
T32-R40N09C05-1_1/8-12-21R 10139759 UNF1 1/8-12 12.0 22.00X18.00 4 C
1.125 0.235 0.866 3.346 5.670 5.906 0.866 1.043
31,75 5,94 22,0 85 144,06 150,0 22,0 29,5
T32-R40N09C05-1_1/4-12-21R 10139634 UNF1 1/4-12 12.0 22.00X18.00 4 C
1.250 0.234 0.866 3.346 5.672 5.906 0.866 1.161
34,925 6,07 22,0 101 163,93 170,0 28,0 32,8
T32-R40N09C05-1_3/8-12-21R 10139628 UNF1 3/8-12 12.0 28.00X22.00 4 C
1.375 0.239 0.866 3.976 6.454 6.693 1.102 1.291
38,1 6,04 24,0 101 163,96 170,0 28,0 36,0
T32-R40N09C05-1_1/2-12-21R 10139635 UNF1 1/2-12 12.0 28.00X22.00 4 C
1.500 0.238 0.945 3.976 6.455 6.693 1.102 1.417
Thread tapping
Annex
334
www.secotools.com
Thread tapping
T32-R40NC
Blind holes – G threads
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• Substrate: HSSE
• FHA = 40°
TPI
9,728 2,67 10,0 67 87,33 90,0 7,0 8,8
T32-R40N21C09-1/8-28-11R 10139637 G1/8-28 28.0 7.00X5.50 3 C
Mini-Shaft™
0.383 0.105 0.394 2.638 3.438 3.543 0.276 0.346
13,157 3,72 14,0 71 96,28 100,0 11,0 11,8
T32-R40N21C09-1/4-19-11R 10139638 G1/4-19 19.0 11.00X9.00 3 C
0.518 0.146 0.551 2.795 3.791 3.937 0.433 0.465
16,662 3,92 15,0 58 96,08 100,0 12,0 15,25
T32-R40N21C09-3/8-19-11R 10139639 G3/8-19 19.0 12.00X9.00 4 C
0.656 0.154 0.591 2.283 3.783 3.937 0.472 0.600
20,955 5,28 17,0 80 119,72 125,0 16,0 19,0
T32-R40N21C09-1/2-14-11R 10139640 G1/2-14 14.0 16.00X12.00 4 C
0.825 0.208 0.669 3.150 4.713 4.921 0.630 0.748
22,911 5,21 20,0 78 119,79 125,0 18,0 21,0
T32-R40N21C09-5/8-14-11R 10139641 G5/8-14 14.0 18.00X14.50 4 C
0.902 0.205 0.787 3.071 4.716 4.921 0.709 0.827
26,441 5,45 20,0 77 134,55 140,0 20,0 24,5
T32-R40N21C09-3/4-14-11R 10139642 G3/4-14 14.0 20.00X16.00 4 C
1.041 0.215 0.787 3.031 5.297 5.512 0.787 0.965
Thread milling
30,201 5,38 22,0 85 144,62 150,0 22,0 28,25
T32-R40N21C09-7/8-14-11R 10139643 G7/8-14 14.0 22.00X18.00 4 C
1.189 0.212 0.866 3.346 5.694 5.906 0.866 1.112
33,249 6,56 24,0 93 153,44 160,0 25,0 30,75
T32-R40N21C09-1-11-11R 10139644 G1-11 11.0 25.00X20.00 4 C
1.309 0.258 0.945 3.661 6.041 6.299 0.984 1.211
Thread tapping
Annex
335
www.secotools.com
Thread tapping
T34-PHB-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Coating: TiAlN + WC/C
mm
1,13 6,0 13 38,87 40,9 2,5 0,75
T34-PH01B03-1X0.25-41R 10139302 M1 0,25 2.50X2.10 2 B
0.044 0.236 0.512 1.530 1.610 0.098 0.030
Mini-Shaft™
1,13 6,0 13 38,87 41,0 2,5 0,85

T34-PH01B03-1.1X0.25-41R 10139303 M1.1 0,25 2.50X2.10 2 B
0.044 0.236 0.512 1.530 1.614 0.098 0.033
1,13 6,0 13 38,87 41,1 2,5 0,95
T34-PH01B03-1.2X0.25-41R 10139304 M1.2 0,25 2.50X2.10 2 B
0.044 0.236 0.512 1.530 1.618 0.098 0.037
1,32 8,0 13 38,68 41,3 2,5 1,1
T34-PH01B03-1.4X0.3-41R 10139305 M1.4 0,3 2.50X2.10 2 B
0.052 0.315 0.512 1.523 1.626 0.098 0.043
Thread milling
Thread tapping
Annex
336
www.secotools.com
Thread tapping
T34-PHB-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,54 8,0 13 38,46 41,4 2,5 1,25
T34-PH01B03-1.6X0.35-63R 10139306 M1.6 0,35 2.50X2.10 2 B
0.061 0.315 0.512 1.514 1.630 0.098 0.049
Mini-Shaft™
1,54 8,0 13 38,46 41,5 2,5 1,35
T34-PH01B03-1.7X0.35-63R 10139307 M1.7 0,35 2.50X2.10 2 B
0.061 0.315 0.512 1.514 1.634 0.098 0.053
1,54 8,0 13 38,46 41,6 2,5 1,45
T34-PH01B03-1.8X0.35-63R 10139308 M1.8 0,35 2.50X2.10 2 B
0.061 0.315 0.512 1.514 1.638 0.098 0.057
1,89 10,0 13 43,11 46,3 2,8 1,6
T34-PH01B03-2X0.4-63R 10139309 M2 0,4 2.80X2.10 2 B
0.074 0.394 0.512 1.697 1.823 0.110 0.063
2,07 10,0 13 42,93 46,3 2,8 1,75
T34-PH01B03-2.2X0.45-63R 10139310 M2.2 0,45 2.80X2.10 2 B
0.081 0.394 0.512 1.690 1.823 0.110 0.069
1,89 10,0 13 43,11 46,3 2,8 1,9
T34-PH01B03-2.3X0.4-63R 10139311 M2.3 0,4 2.80X2.10 2 B
0.074 0.394 0.512 1.697 1.823 0.110 0.075
2,07 9,0 14 47,93 51,7 2,8 2,05
Thread milling
T34-PH01B03-2.5X0.45-63R 10139312 M2.5 0,45 2.80X2.10 2 B
0.081 0.354 0.551 1.887 2.035 0.110 0.081
2,07 9,0 14 47,93 51,7 2,8 2,15
T34-PH01B03-2.6X0.45-63R 10139313 M2.6 0,45 2.80X2.10 2 B
0.081 0.354 0.551 1.887 2.035 0.110 0.085
Thread tapping
Annex
337
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE-PM
• Thread tolerance class: 6HX
mm
2,3 5,0 18 53,7 57,2 3,5 2,5
T34-PH01B03-3X0.5-65R 10139314 M3 0,5 3.50X2.70 3 B
0.091 0.197 0.709 2.114 2.252 0.138 0.098
Mini-Shaft™
2,67 6,0 20 53,33 57,4 4,0 2,9

T34-PH01B03-3.5X0.6-65R 10139315 M3.5 0,6 4.00X3.00 3 B
0.105 0.236 0.787 2.100 2.260 0.157 0.114
3,03 7,0 21 59,97 64,6 4,5 3,3
T34-PH01B03-4X0.7-65R 10139316 M4 0,7 4.50X3.40 3 B
0.119 0.276 0.827 2.361 2.543 0.177 0.130
3,36 7,5 25 66,64 71,8 6,0 3,8
T34-PH01B03-4.5X0.75-65R 10139317 M4.5 0,75 6.00X4.90 3 B
0.132 0.295 0.984 2.624 2.827 0.236 0.150
3,71 8,0 25 66,29 72,0 6,0 4,2
T34-PH01B03-5X0.8-65R 10139318 M5 0,8 6.00X4.90 3 B
0.146 0.315 0.984 2.610 2.835 0.236 0.165
4,5 10,0 30 75,5 82,4 6,0 5,0
T34-PH01B03-6X1-65R 10139319 M6 1,0 6.00X4.90 3 B
0.177 0.394 1.181 2.972 3.244 0.236 0.197
5,48 13,0 35 84,52 93,3 8,0 6,8
Thread milling
T34-PH01B03-8X1.25-65R 10139320 M8 1,25 8.00X6.20 3 B

0.216 0.512 1.378 3.328 3.673 0.315 0.268
6,9 15,0 39 93,1 101,8 10,0 8,5
T34-PH01B03-10X1.5-65R 10139321 M10 1,5 10.00X8.00 3 B
0.272 0.591 1.535 3.665 4.008 0.394 0.335
Thread tapping
Annex
338
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
8,11 18,0 83 101,89 110,0 9,0 10,2
T34-PH01B06-12X1.75-65R 10139322 M12 1,75 9.00X7.00 3 B
0.319 0.709 3.268 4.011 4.331 0.354 0.402
Mini-Shaft™
9,26 20,0 81 100,74 110,0 11,0 12,0
T34-PH01B06-14X2-65R 10139323 M14 2,0 11.00X9.00 3 B
0.365 0.787 3.189 3.966 4.331 0.433 0.472
9,36 20,0 68 100,64 110,0 12,0 14,0
T34-PH01B06-16X2-65R 10139324 M16 2,0 12.00X9.00 3 B
0.369 0.787 2.677 3.962 4.331 0.472 0.551
11,3 25,0 81 113,7 125,0 14,0 15,5
T34-PH01B06-18X2.5-65R 10139325 M18 2,5 14.00X11.00 4 B
0.445 0.984 3.189 4.476 4.921 0.551 0.610
11,4 25,0 95 128,6 140,0 16,0 17,5
T34-PH01B06-20X2.5-65R 10139326 M20 2,5 16.00X12.00 4 B
0.449 0.984 3.740 5.063 5.512 0.630 0.689
11,4 25,0 93 128,6 140,0 18,0 19,5
T34-PH01B06-22X2.5-65R 10139327 M22 2,5 18.00X14.50 4 B
0.449 0.984 3.661 5.063 5.512 0.709 0.768
13,62 30,0 113 146,38 160,0 18,0 21,0
Thread milling
T34-PH01B06-24X3-65R 10139328 M24 3,0 18.00X14.50 4 B
0.536 1.181 4.449 5.763 6.299 0.709 0.827
13,82 30,0 97 146,18 160,0 20,0 24,0
T34-PH01B06-27X3-65R 10139329 M27 3,0 20.00X16.00 4 B
0.544 1.181 3.819 5.755 6.299 0.787 0.945
15,87 35,0 115 164,13 180,0 22,0 26,5
T34-PH01B06-30X3.5-65R 10139330 M30 3,5 22.00X18.00 4 B
0.625 1.378 4.528 6.462 7.087 0.866 1.043
15,87 35,0 113 164,13 180,0 25,0 29,5
T34-PH01B06-33X3.5-65R 10139331 M33 3,5 25.00X20.00 4 B
0.625 1.378 4.449 6.462 7.087 0.984 1.161
18,13 40,0 131 181,87 200,0 28,0 32,0
T34-PH01B06-36X4-65R 10139332 M36 4,0 28.00X22.00 4 B
0.714 1.575 5.157 7.160 7.874 1.102 1.260
Thread tapping
Annex
339
www.secotools.com
Thread tapping
T34B-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Internal coolant
mm
3,71 8,0 25 66,29 72,0 6,0 4,2
T34B-PH01B03-5X0.8-65R 10139333 M5 0,8 6.00X4.90 3 B
Mini-Shaft™
0.146 0.315 0.984 2.610 2.835 0.236 0.165

4,5 10,0 30 75,5 82,4 6,0 5,0
T34B-PH01B03-6X1-65R 10139334 M6 1,0 6.00X4.90 3 B
0.177 0.394 1.181 2.972 3.244 0.236 0.197
5,48 13,0 35 84,52 93,3 8,0 6,8
T34B-PH01B03-8X1.25-65R 10139335 M8 1,25 8.00X6.20 3 B
0.216 0.512 1.378 3.328 3.673 0.315 0.268
6,9 15,0 39 93,1 100,0 10,0 8,5
T34B-PH01B03-10X1.5-65R 10139336 M10 1,5 10.00X8.00 3 B
0.272 0.591 1.535 3.665 3.937 0.394 0.335
Thread milling
Thread tapping
Annex
340
www.secotools.com
Thread tapping
T34B-PHB
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
8,11 18,0 83 101,89 110,0 9,0 10,2
T34B-PH01B06-12X1.75-65R 10139337 M12 1,75 9.00X7.00 3 B
Mini-Shaft™
0.319 0.709 3.268 4.011 4.331 0.354 0.402
9,26 20,0 81 100,74 110,0 11,0 12,0
T34B-PH01B06-14X2-65R 10139338 M14 2,0 11.00X9.00 3 B
0.365 0.787 3.189 3.966 4.331 0.433 0.472
9,36 20,0 68 100,64 110,0 12,0 14,0
T34B-PH01B06-16X2-65R 10139339 M16 2,0 12.00X9.00 3 B
0.369 0.787 2.677 3.962 4.331 0.472 0.551
Thread milling
Thread tapping
Annex
341
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,6 5,0 18 54,4 57,2 3,5 2,65
T34-PH02B03-3X0.35-65R 10139340 MF3X0.35 0,35 3.50X2.70 3 B
0.063 0.197 0.709 2.142 2.252 0.138 0.104
Mini-Shaft™
1,6 5,0 20 54,4 57,4 4,0 3,15

T34-PH02B03-3.5X0.35-65R 10139341 MF3.5X0.35 0,35 4.00X3.00 3 B
0.063 0.197 0.787 2.142 2.260 0.157 0.124
2,3 7,0 21 60,7 64,6 4,5 3,5
T34-PH02B03-4X0.5-65R 10139342 MF4X0.5 0,5 4.50X3.40 3 B
0.091 0.276 0.827 2.390 2.543 0.177 0.138
2,3 8,0 25 67,7 72,0 6,0 4,5
T34-PH02B03-5X0.5-65R 10139343 MF5X0.5 0,5 6.00X4.90 3 B
0.091 0.315 0.984 2.665 2.835 0.236 0.177
2,34 10,0 30 77,66 82,4 6,0 5,5
T34-PH02B03-6X0.5-65R 10139344 MF6X0.5 0,5 6.00X4.90 3 B
0.092 0.394 1.181 3.057 3.244 0.236 0.217
3,4 10,0 30 76,6 82,4 6,0 5,2
T34-PH02B03-6X0.75-65R 10139345 MF6X0.75 0,75 6.00X4.90 3 B
0.134 0.394 1.181 3.016 3.244 0.236 0.205
3,4 10,0 30 76,6 83,6 8,0 7,2
Thread milling
T34-PH02B03-8X0.75-65R 10139346 MF8X0.75 0,75 8.00X6.20 3 B

0.134 0.394 1.181 3.016 3.291 0.315 0.283
4,45 13,0 35 85,55 93,3 8,0 7,0
T34-PH02B03-8X1-65R 10139347 MF8X1.0 1,0 8.00X6.20 3 B
0.175 0.512 1.378 3.368 3.673 0.315 0.276
3,8 13,0 35 86,2 91,8 10,0 9,2
T34-PH02B03-10X0.75-65R 10139348 MF10X0.75 0,75 10.00X8.00 3 B
0.150 0.512 1.378 3.394 3.614 0.394 0.362
5,25 13,0 35 84,75 91,8 10,0 9,0
T34-PH02B03-10X1-65R 10139349 MF10X1.0 1,0 10.00X8.00 3 B
0.207 0.512 1.378 3.337 3.614 0.394 0.354
6,28 15,0 39 93,72 101,8 10,0 8,8
T34-PH02B03-10X1.25-65R 10139350 MF10X1.25 1,25 10.00X8.00 3 B
0.247 0.591 1.535 3.690 4.008 0.394 0.346
Thread tapping
Annex
342
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
4,75 10,0 35 85,25 90,0 6,0 7,0
T34-PH02B05-8X1-65R 10139351 MF8X1.0 1,0 6.00X4.90 3 B
0.187 0.394 1.378 3.356 3.543 0.236 0.276
Mini-Shaft™
4,85 10,0 35 85,15 90,0 7,0 9,0
T34-PH02B05-10X1-65R 10139352 MF10X1.0 1,0 7.00X5.50 3 B
0.191 0.394 1.378 3.352 3.543 0.276 0.354
4,98 10,0 73 95,02 100,0 9,0 11,0
T34-PH02B05-12X1-65R 10139353 MF12X1.0 1,0 9.00X7.00 3 B
0.196 0.394 2.874 3.741 3.937 0.354 0.433
7,07 15,0 73 92,93 100,0 9,0 10,8
T34-PH02B05-12X1.25-65R 10139354 MF12X1.25 1,25 9.00X7.00 3 B
0.278 0.591 2.874 3.659 3.937 0.354 0.425
6,03 15,0 73 93,97 100,0 9,0 10,5
T34-PH02B05-12X1.5-65R 10139355 MF12X1.5 1,5 9.00X7.00 3 B
0.237 0.591 2.874 3.700 3.937 0.354 0.413
7,17 15,0 71 92,83 100,0 11,0 12,5
T34-PH02B05-14X1.5-65R 10139356 MF14X1.5 1,5 11.00X9.00 3 B
0.282 0.591 2.795 3.655 3.937 0.433 0.492
7,27 15,0 58 92,73 100,0 12,0 14,5
Thread milling
T34-PH02B05-16X1.5-65R 10139357 MF16X1.5 1,5 12.00X9.00 3 B
0.286 0.591 2.283 3.651 3.937 0.472 0.571
7,17 17,0 66 102,83 110,0 14,0 16,5
T34-PH02B05-18X1.5-65R 10139358 MF18X1.5 1,5 14.00X11.00 4 B
0.282 0.669 2.598 4.048 4.331 0.551 0.650
7,27 17,0 80 117,73 125,0 16,0 18,5
T34-PH02B05-20X1.5-65R 10139359 MF20X1.5 1,5 16.00X12.00 4 B
0.286 0.669 3.150 4.635 4.921 0.630 0.728
7,27 17,0 78 117,73 125,0 18,0 20,5
T34-PH02B05-22X1.5-65R 10139360 MF22X1.5 1,5 18.00X14.50 4 B
0.286 0.669 3.071 4.635 4.921 0.709 0.807
7,41 20,0 93 132,59 140,0 18,0 22,5
T34-PH02B05-24X1.5-65R 10139361 MF24X1.5 1,5 18.00X14.50 4 B
0.292 0.787 3.661 5.220 5.512 0.709 0.886
Thread tapping
Annex
343
www.secotools.com
Thread tapping
T34B-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
4,45 13,0 35 85,55 93,4 8,0 7,0
T34B-PH02B03-8X1-65R 10139362 MF8X1.0 1,0 8.00X6.20 3 B
Mini-Shaft™
0.175 0.512 1.378 3.368 3.677 0.315 0.276

5,25 13,0 35 84,75 90,0 10,0 9,0
T34B-PH02B03-10X1-65R 10139363 MF10X1.0 1,0 10.00X8.00 3 B
0.207 0.512 1.378 3.337 3.543 0.394 0.354
Thread milling
Thread tapping
Annex
344
www.secotools.com
Thread tapping
T34B-PHB
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
4,75 10,0 35 85,25 90,0 6,0 7,0
T34B-PH02B05-8X1-65R 10139364 MF8X1.0 1,0 6.00X4.90 3 B
Mini-Shaft™
0.187 0.394 1.378 3.356 3.543 0.236 0.276
4,85 10,0 35 85,15 90,0 7,0 9,0
T34B-PH02B05-10X1-65R 10139365 MF10X1.0 1,0 7.00X5.50 3 B
0.191 0.394 1.378 3.352 3.543 0.276 0.354
7,07 15,0 73 92,93 100,0 9,0 10,5
T34B-PH02B05-12X1.5-65R 10139366 MF12X1.5 1,5 9.00X7.00 3 B
0.278 0.591 2.874 3.659 3.937 0.354 0.413
7,17 15,0 71 92,83 100,0 11,0 12,5
T34B-PH02B05-14X1.5-65R 10139367 MF14X1.5 1,5 11.00X9.00 3 B
0.282 0.591 2.795 3.655 3.937 0.433 0.492
7,27 15,0 58 92,73 100,0 12,0 14,5
T34B-PH02B05-16X1.5-65R 10139368 MF16X1.5 1,5 12.00X9.00 3 B
0.286 0.591 2.283 3.651 3.937 0.472 0.571
Thread milling
Thread tapping
Annex
345
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Thread tolerance class: 2BX
TPI
2,845 2,83 5,0 18 53,17 56,0 3,5 2,35
T34-PH08B03-4-40-22R 10139041 UNC4-40 40.0 3.50X2.70 3 B
0.112 0.111 0.197 0.709 2.093 2.205 0.138 0.093
Mini-Shaft™
3,175 2,94 7,0 18 53,06 57,2 3,5 2,65

T34-PH08B03-5-40-22R 10139042 UNC5-40 40.0 3.50X2.70 3 B
0.125 0.116 0.276 0.709 2.089 2.252 0.138 0.104
3,505 3,74 6,0 20 52,26 57,4 4,0 2,85
T34-PH08B03-6-32-22R 10139043 UNC6-32 32.0 4.00X3.00 3 B
0.138 0.147 0.236 0.787 2.057 2.260 0.157 0.112
4,166 3,62 7,0 21 59,38 64,6 4,5 3,5
T34-PH08B03-8-32-22R 10139044 UNC8-32 32.0 4.50X3.40 3 B
0.164 0.143 0.276 0.827 2.338 2.543 0.177 0.138
4,826 4,86 8,0 25 65,14 72,0 6,0 3,9
T34-PH08B03-10-24-22R 10139045 UNC10-24 24.0 6.00X4.90 3 B
0.190 0.191 0.315 0.984 2.565 2.835 0.236 0.154
5,486 4,74 10,0 30 75,26 82,2 6,0 4,5
T34-PH08B03-12-24-22R 10139046 UNC12-24 24.0 6.00X4.90 3 B
0.216 0.187 0.394 1.181 2.963 3.236 0.236 0.177
6,35 5,65 13,0 32 74,35 82,4 7,0 5,1
Thread milling
T34-PH08B03-1/4-20-22R 10139047 UNC1/4-20 20.0 7.00X5.50 3 B

0.250 0.222 0.512 1.260 2.927 3.244 0.276 0.201
7,937 6,31 13,0 35 83,69 93,3 8,0 6,6
T34-PH08B03-5/16-18-22R 10139048 UNC5/16-18 18.0 8.00X6.20 3 B
0.312 0.248 0.512 1.378 3.295 3.673 0.315 0.260
9,525 7,37 15,0 39 92,63 100,0 10,0 8,0
T34-PH08B03-3/8-16-22R 10139049 UNC3/8-16 16.0 10.00X8.00 3 B
0.375 0.290 0.591 1.535 3.647 3.937 0.394 0.315
Thread tapping
Annex
346
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
11,112 8,36 15,0 76 91,64 100,0 8,0 9,3
T34-PH08B06-7/16-14-22R 10139050 UNC7/16-14 14.0 8.00X6.20 3 B
0.437 0.329 0.591 2.992 3.608 3.937 0.315 0.366
Mini-Shaft™
12,7 9,01 18,0 83 100,99 110,0 9,0 10,7
T34-PH08B06-1/2-13-22R 10139051 UNC1/2-13 13.0 9.00X7.00 3 B
0.500 0.355 0.709 3.268 3.976 4.331 0.354 0.421
14,287 9,87 20,0 81 100,13 110,0 11,0 12,3
T34-PH08B06-9/16-12-22R 10139052 UNC9/16-12 12.0 11.00X9.00 3 B
0.562 0.389 0.787 3.189 3.942 4.331 0.433 0.484
15,875 10,62 22,0 68 99,38 110,0 12,0 13,5
T34-PH08B06-5/8-11-22R 10139053 UNC5/8-11 11.0 12.00X9.00 3 B
0.625 0.418 0.866 2.677 3.913 4.331 0.472 0.531
Thread milling
Thread tapping
Annex
347
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
2,845 2,48 5,0 18 53,52 57,2 3,5 2,4
T34-PH09B03-4-48-22R 10139369 UNF4-48 48.0 3.50X2.70 3 B
0.112 0.098 0.197 0.709 2.107 2.252 0.138 0.094
Mini-Shaft™
3,175 2,6 7,0 18 53,4 57,2 3,5 2,7

T34-PH09B03-5-44-22R 10139370 UNF5-44 44.0 3.50X2.70 3 B
0.125 0.102 0.276 0.709 2.102 2.252 0.138 0.106
3,505 3,05 6,0 20 52,95 57,4 4,0 2,95
T34-PH09B03-6-40-22R 10139371 UNF6-40 40.0 4.00X3.00 3 B
0.138 0.120 0.236 0.787 2.085 2.260 0.157 0.116
4,166 3,28 7,0 21 59,72 64,6 4,5 3,5
T34-PH09B03-8-36-22R 10139372 UNF8-36 36.0 4.50X3.40 3 B
0.164 0.129 0.276 0.827 2.351 2.543 0.177 0.138
4,826 3,5 8,0 25 66,5 72,0 6,0 4,1
T34-PH09B03-10-32-22R 10139373 UNF10-32 32.0 6.00X4.90 3 B
0.190 0.138 0.315 0.984 2.618 2.835 0.236 0.161
5,486 4,05 10,0 30 75,95 82,2 6,0 4,6
T34-PH09B03-12-28-22R 10139374 UNF12-28 28.0 6.00X4.90 3 B
0.216 0.159 0.394 1.181 2.990 3.236 0.236 0.181
6,35 3,94 10,0 30 76,06 82,4 7,0 5,5
Thread milling
T34-PH09B03-1/4-28-22R 10139375 UNF1/4-28 28.0 7.00X5.50 3 B

0.250 0.155 0.394 1.181 2.994 3.244 0.276 0.217
7,937 4,6 13,0 35 85,4 93,3 8,0 6,9
T34-PH09B03-5/16-24-22R 10139376 UNF5/16-24 24.0 8.00X6.20 3 B
0.312 0.181 0.512 1.378 3.362 3.673 0.315 0.272
9,525 4,98 15,0 35 85,02 90,0 10,0 8,5
T34-PH09B03-3/8-24-22R 10139377 UNF3/8-24 24.0 10.00X8.00 3 B
0.375 0.196 0.591 1.378 3.347 3.543 0.394 0.335
Thread tapping
Annex
348
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
11,112 5,95 15,0 76 94,05 100,0 8,0 9,9
T34-PH09B05-7/16-20-22R 10139378 UNF7/16-20 20.0 8.00X6.20 3 B
0.437 0.234 0.591 2.992 3.703 3.937 0.315 0.390
Mini-Shaft™
12,7 6,14 15,0 73 93,86 100,0 9,0 11,5
T34-PH09B05-1/2-20-22R 10139379 UNF1/2-20 20.0 9.00X7.00 3 B
0.500 0.242 0.591 2.874 3.695 3.937 0.354 0.453
14,287 6,8 15,0 71 93,2 100,0 11,0 13,0
T34-PH09B05-9/16-18-22R 10139380 UNF9/16-18 18.0 11.00X9.00 3 B
0.562 0.268 0.591 2.795 3.669 3.937 0.433 0.512
15,875 6,87 15,0 58 93,13 100,0 12,0 14,5
T34-PH09B05-5/8-18-22R 10139381 UNF5/8-18 18.0 12.00X9.00 3 B
0.625 0.270 0.591 2.283 3.667 3.937 0.472 0.571
Thread milling
Thread tapping
Annex
349
www.secotools.com
Thread tapping
T34-PHB
Through holes – G threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Thread tolerance class: NORMAL-X
TPI
9,728 4,49 10,0 36 85,51 90,0 7,0 8,8
T34-PH21B09-1/8-28-12R 10139401 G1/8-28 28.0 7.00X5.50 3 B
0.383 0.177 0.394 1.417 3.367 3.543 0.276 0.346
Mini-Shaft™
13,157 6,85 14,0 71 93,15 100,0 11,0 11,8

T34-PH21B09-1/4-19-12R 10139402 G1/4-19 19.0 11.00X9.00 3 B
0.518 0.270 0.551 2.795 3.667 3.937 0.433 0.465
16,662 6,97 15,0 58 93,03 100,0 12,0 15,25
T34-PH21B09-3/8-19-12R 10139403 G3/8-19 19.0 12.00X9.00 4 B
0.656 0.274 0.591 2.283 3.663 3.937 0.472 0.600
20,955 9,0 17,0 80 116,0 125,0 16,0 19,0
T34-PH21B09-1/2-14-12R 10139404 G1/2-14 14.0 16.00X12.00 4 B
0.825 0.354 0.669 3.150 4.567 4.921 0.630 0.748
22,911 9,4 20,0 78 115,6 125,0 18,0 21,0
T34-PH21B09-5/8-14-12R 10139405 G5/8-14 14.0 18.00X14.50 4 B
0.902 0.370 0.787 3.071 4.551 4.921 0.709 0.827
26,441 9,16 20,0 77 130,84 140,0 20,0 24,5
T34-PH21B09-3/4-14-12R 10139406 G3/4-14 14.0 20.00X16.00 4 B
1.041 0.361 0.787 3.031 5.151 5.512 0.787 0.965
30,201 9,03 22,0 85 140,97 150,0 22,0 28,25
Thread milling
T34-PH21B09-7/8-14-12R 10139407 G7/8-14 14.0 22.00X18.00 4 B

1.189 0.356 0.866 3.346 5.550 5.906 0.866 1.112
33,249 11,49 24,0 93 148,51 160,0 25,0 30,75
T34-PH21B09-1-11-12R 10139408 G1-11 11.0 25.00X20.00 4 B
1.309 0.452 0.945 3.661 5.847 6.299 0.984 1.211
Thread tapping
Annex
350
www.secotools.com
Thread tapping
T34-PHB
Through holes – EGM threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Thread tolerance class: 6H mod.
mm
2,07 9,0 14 47,93 51,7 2,8 2,1
T34-PH04B03-2X0.4-64R 10139382 EGM2 0,4 2.80X2.10 2 B
0.081 0.354 0.551 1.887 2.035 0.110 0.083
Mini-Shaft™
2,13 10,0 18 53,87 57,2 3,5 2,65
T34-PH04B03-2.5X0.45-64R 10139383 EGM2.5 0,45 3.50X2.70 3 B
0.084 0.394 0.709 2.121 2.252 0.138 0.104
2,03 12,0 21 60,97 64,6 4,5 3,15
T34-PH04B03-3X0.5-64R 10139384 EGM3 0,5 4.50X3.40 3 B
0.080 0.472 0.827 2.400 2.543 0.177 0.124
3,27 14,0 25 66,73 72,0 6,0 4,2
T34-PH04B03-4X0.7-64R 10139385 EGM4 0,7 6.00X4.90 3 B
0.129 0.551 0.984 2.627 2.835 0.236 0.165
3,72 18,0 30 76,28 82,4 6,0 5,25
T34-PH04B03-5X0.8-64R 10139386 EGM5 0,8 6.00X4.90 3 B
0.146 0.709 1.181 3.003 3.244 0.236 0.207
4,7 18,0 35 85,3 90,0 8,0 6,3
T34-PH04B03-6X1-64R 10139387 EGM6 1,0 8.00X6.20 3 B
0.185 0.709 1.378 3.358 3.543 0.315 0.248
5,8 20,0 39 94,2 100,0 10,0 8,4
Thread milling
T34-PH04B03-8X1.25-64R 10139388 EGM8 1,25 10.00X8.00 3 B
0.228 0.787 1.535 3.709 3.937 0.394 0.331
Thread tapping
Annex
351
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
7,41 15,0 73 92,59 100,0 9,0 10,5
T34-PH04B06-10X1.5-64R 10139409 EGM10 1,5 9.00X7.00 3 B
0.292 0.591 2.874 3.645 3.937 0.354 0.413
Mini-Shaft™
8,29 20,0 81 101,71 110,0 11,0 12,5

T34-PH04B06-12X1.75-64R 10139410 EGM12 1,75 11.00X9.00 4 B
0.326 0.787 3.189 4.004 4.331 0.433 0.492
9,14 20,0 68 100,86 110,0 12,0 14,5
T34-PH04B06-14X2-64R 10139411 EGM14 2,0 12.00X9.00 4 B
0.360 0.787 2.677 3.971 4.331 0.472 0.571
9,14 20,0 81 115,86 125,0 14,0 16,5
T34-PH04B06-16X2-64R 10139412 EGM16 2,0 14.00X11.00 4 B
0.360 0.787 3.189 4.561 4.921 0.551 0.650
11,45 27,0 93 128,55 140,0 18,0 18,75
T34-PH04B06-18X2.5-64R 10139413 EGM18 2,5 18.00X14.50 4 B
0.451 1.063 3.661 5.061 5.512 0.709 0.738
11,45 30,0 113 148,55 160,0 18,0 20,75
T34-PH04B06-20X2.5-64R 10139414 EGM20 2,5 18.00X14.50 4 B
0.451 1.181 4.449 5.848 6.299 0.709 0.817
Thread milling
Thread tapping
Annex
352
www.secotools.com
Thread tapping
T34-PHB
Through holes – EGUNC threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
3,67 2,83 13,0 21 60,17 64,6 4,5 3,1
T34-PH16B03-4-40-21R 10139389 EGUNC4-40 40.0 4.50X3.40 3 B
0.144 0.111 0.512 0.827 2.369 2.543 0.177 0.122
Mini-Shaft™
4,536 3,75 14,0 25 66,25 71,8 6,0 3,8
T34-PH16B03-6-32-21R 10139390 EGUNC6-32 32.0 6.00X4.90 3 B
0.179 0.148 0.551 0.984 2.608 2.827 0.236 0.150
5,197 3,73 16,0 30 76,27 82,1 6,0 4,4
T34-PH16B03-8-32-21R 10139391 EGUNC8-32 32.0 6.00X4.90 3 B
0.205 0.147 0.630 1.181 3.003 3.232 0.236 0.173
6,2 3,5 17,0 30 76,5 82,4 7,0 5,2
T34-PH16B03-10-24-21R 10139392 EGUNC10-24 24.0 7.00X5.50 3 B
0.244 0.138 0.669 1.181 3.012 3.244 0.276 0.205
8,001 5,71 20,0 35 84,29 93,3 8,0 6,7
T34-PH16B03-1/4-20-21R 10139393 EGUNC1/4-20 20.0 8.00X6.20 3 B
0.315 0.225 0.787 1.378 3.319 3.673 0.315 0.264
9,771 6,61 22,0 39 93,39 100,0 10,0 8,4
T34-PH16B03-5/16-18-21R 10139394 EGUNC5/16-18 18.0 10.00X8.00 3 B
0.385 0.260 0.866 1.535 3.677 3.937 0.394 0.331
Thread milling
Thread tapping
Annex
353
www.secotools.com
Thread tapping
T34-PHB
Through holes – EGUNC threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
11,587 7,6 15,0 73 92,4 100,0 9,0 10,0
T34-PH16B06-3/8-16-21R 10139415 EGUNC3/8-16 16.0 9.00X7.00 3 B
0.456 0.299 0.591 2.874 3.638 3.937 0.354 0.394
Mini-Shaft™
13,47 8,6 18,0 81 101,4 110,0 11,0 11,6

T34-PH16B06-7/16-14-21R 10139416 EGUNC7/16-14 14.0 11.00X9.00 3 B
0.530 0.339 0.709 3.189 3.992 4.331 0.433 0.457
15,237 9,3 18,0 68 100,7 110,0 12,0 13,3
T34-PH16B06-1/2-13-21R 10139417 EGUNC1/2-13 13.0 12.00X9.00 3 B
0.600 0.366 0.709 2.677 3.965 4.331 0.472 0.524
17,038 9,7 20,0 68 100,3 110,0 12,0 14,9
T34-PH16B06-9/16-12-21R 10139418 EGUNC9/16-12 12.0 12.00X9.00 4 B
0.671 0.382 0.787 2.677 3.949 4.331 0.472 0.587
18,875 10,6 20,0 81 114,4 125,0 14,0 16,5
T34-PH16B06-5/8-11-21R 10139419 EGUNC5/8-11 11.0 14.00X11.00 4 B
0.743 0.417 0.787 3.189 4.504 4.921 0.551 0.650
22,349 11,8 25,0 93 128,2 140,0 18,0 19,75
T34-PH16B06-3/4-10-21R 10139420 EGUNC3/4-10 10.0 18.00X14.50 4 B
0.880 0.465 0.984 3.661 5.047 5.512 0.709 0.778
Thread milling
Thread tapping
Annex
354
www.secotools.com
Thread tapping
T34-PHB
Through holes – EGUNF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
3,533 2,36 9,0 20 53,64 57,4 4,0 3,0
T34-PH17B03-4-48-21R 10139395 EGUNF4-48 48.0 4.00X3.00 3 B
0.139 0.093 0.354 0.787 2.112 2.260 0.157 0.118
Mini-Shaft™
4,331 2,75 10,0 25 67,25 71,8 6,0 3,7
T34-PH17B03-6-40-21R 10139396 EGUNF6-40 40.0 6.00X4.90 3 B
0.171 0.108 0.394 0.984 2.648 2.827 0.236 0.146
5,083 2,93 13,0 30 77,07 82,1 6,0 4,4
T34-PH17B03-8-36-21R 10139397 EGUNF8-36 36.0 6.00X4.90 3 B
0.200 0.115 0.512 1.181 3.034 3.232 0.236 0.173
5,857 3,5 13,0 30 76,5 82,4 6,0 5,1
T34-PH17B03-10-32-21R 10139398 EGUNF10-32 32.0 6.00X4.90 3 B
0.231 0.138 0.512 1.181 3.012 3.244 0.236 0.201
7,529 4,09 17,0 35 85,91 93,2 8,0 6,6
T34-PH17B03-1/4-28-21R 10139399 EGUNF1/4-28 28.0 8.00X6.20 3 B
0.296 0.161 0.669 1.378 3.382 3.669 0.315 0.260
9,312 5,1 18,0 35 84,97 90,0 10,0 8,25
T34-PH17B03-5/16-24-21R 10139400 EGUNF5/16-24 24.0 10.00X8.00 3 B
0.367 0.201 0.709 1.378 3.345 3.543 0.394 0.325
Thread milling
Thread tapping
Annex
355
www.secotools.com
Thread tapping
T34-PHB
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
TPI
10,899 4,43 12,0 66 85,57 90,0 8,0 9,8
T34-PH17B06-3/8-24-21R 10139421 EGUNF3/8-24 24.0 8.00X6.00 3 B
0.429 0.174 0.472 2.598 3.369 3.543 0.315 0.386
Mini-Shaft™
12,763 6,2 15,0 73 93,8 100,0 9,0 11,5

T34-PH17B06-7/16-20-21R 10139422 EGUNF7/16-20 20.0 9.00X7.00 3 B
0.502 0.244 0.591 2.874 3.693 3.937 0.354 0.453
14,351 6,2 15,0 71 93,8 100,0 11,0 13,1
T34-PH17B06-1/2-20-21R 10139423 EGUNF1/2-20 20.0 11.00X9.00 3 B
0.565 0.244 0.591 2.795 3.693 3.937 0.433 0.516
16,121 6,9 15,0 58 93,1 100,0 12,0 14,7
T34-PH17B06-9/16-18-21R 10139424 EGUNF9/16-18 18.0 12.00X9.00 4 B
0.635 0.272 0.591 2.283 3.665 3.937 0.472 0.579
17,709 6,9 15,0 66 103,1 110,0 14,0 16,25
T34-PH17B06-5/8-18-21R 10139425 EGUNF5/8-18 18.0 14.00X11.00 4 B
0.697 0.272 0.591 2.598 4.059 4.331 0.551 0.640
21,112 7,9 17,0 80 117,1 125,0 16,0 19,5
T34-PH17B06-3/4-16-21R 10139426 EGUNF3/4-16 16.0 16.00X12.00 4 B
0.831 0.311 0.669 3.150 4.610 4.921 0.630 0.768
Thread milling
Thread tapping
Annex
356
www.secotools.com
Thread tapping
T34-R45HC-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
0,59 6,0 13 39,41 40,9 2,5 0,75
T34-R45H01C03-1X0.25-41R 10138952 M1 0,25 2.50X2.10 2 C
Mini-Shaft™
0.023 0.236 0.512 1.552 1.610 0.098 0.030
0,59 6,0 13 39,41 41,0 2,5 0,85
T34-R45H01C03-1.1X0.25-41R 10138953 M1.1 0,25 2.50X2.10 2 C
0.023 0.236 0.512 1.552 1.614 0.098 0.033
0,59 6,0 13 39,41 41,1 2,5 0,95
T34-R45H01C03-1.2X0.25-41R 10138954 M1.2 0,25 2.50X2.10 2 C
0.023 0.236 0.512 1.552 1.618 0.098 0.037
0,69 8,0 13 39,31 41,3 2,5 1,1
T34-R45H01C03-1.4X0.3-41R 10138955 M1.4 0,3 2.50X2.10 2 C
0.027 0.315 0.512 1.548 1.626 0.098 0.043
Thread milling
Thread tapping
Annex
357
www.secotools.com
Thread tapping
T34-R45HC-micro
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
0,8 8,0 13 39,2 41,4 2,5 1,25
T34-R45H01C03-1.6X0.35-63R 10138956 M1.6 0,35 2.50X2.10 2 C
Mini-Shaft™
0.031 0.315 0.512 1.543 1.630 0.098 0.049

0,8 8,0 13 39,2 41,5 2,5 1,35
T34-R45H01C03-1.7X0.35-63R 10138957 M1.7 0,35 2.50X2.10 2 C
0.031 0.315 0.512 1.543 1.634 0.098 0.053
0,8 8,0 13 39,2 41,6 2,5 1,45
T34-R45H01C03-1.8X0.35-63R 10138958 M1.8 0,35 2.50X2.10 2 C
0.031 0.315 0.512 1.543 1.638 0.098 0.057
1,05 10,0 13 43,95 46,3 2,8 1,6
T34-R45H01C03-2X0.4-63R 10138959 M2 0,4 2.80X2.10 2 C
0.041 0.394 0.512 1.730 1.823 0.110 0.063
1,15 10,0 13 43,85 46,3 2,8 1,75
T34-R45H01C03-2.2X0.45-63R 10138960 M2.2 0,45 2.80X2.10 2 C
0.045 0.394 0.512 1.726 1.823 0.110 0.069
1,05 10,0 13 43,95 46,3 2,8 1,9
T34-R45H01C03-2.3X0.4-63R 10138961 M2.3 0,4 2.80X2.10 2 C
0.041 0.394 0.512 1.730 1.823 0.110 0.075
Thread milling
1,06 5,0 14 48,94 51,7 2,8 2,05

T34-R45H01C03-2.5X0.45-63R 10138962 M2.5 0,45 2.80X2.10 2 C
0.042 0.197 0.551 1.927 2.035 0.110 0.081
1,15 5,0 14 48,85 51,7 2,8 2,15
T34-R45H01C03-2.6X0.45-63R 10138963 M2.6 0,45 2.80X2.10 2 C
0.045 0.197 0.551 1.923 2.035 0.110 0.085
Thread tapping
Annex
358
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
1,2 5,0 18 54,8 57,2 3,5 2,5
T34-R45H01C03-3X0.5-65R 10138964 M3 0,5 3.50X2.70 3 C
Mini-Shaft™
0.047 0.197 0.709 2.157 2.252 0.138 0.098
1,31 6,0 20 54,69 57,4 4,0 2,9
T34-R45H01C03-3.5X0.6-65R 10138966 M3.5 0,6 4.00X3.00 3 C
0.052 0.236 0.787 2.153 2.260 0.157 0.114
1,82 7,0 21 61,18 64,6 4,5 3,3
T34-R45H01C03-4X0.7-65R 10138967 M4 0,7 4.50X3.40 3 C
0.072 0.276 0.827 2.409 2.543 0.177 0.130
1,82 7,5 25 68,18 71,8 6,0 3,8
T34-R45H01C03-4.5X0.75-65R 10138968 M4.5 0,75 6.00X4.90 3 C
0.072 0.295 0.984 2.684 2.827 0.236 0.150
2,01 8,0 25 67,99 72,0 6,0 4,2
T34-R45H01C03-5X0.8-65R 10138969 M5 0,8 6.00X4.90 3 C
0.079 0.315 0.984 2.677 2.835 0.236 0.165
2,32 10,0 30 77,68 82,4 6,0 5,0
T34-R45H01C03-6X1-65R 10138970 M6 1,0 6.00X4.90 3 C
0.091 0.394 1.181 3.058 3.244 0.236 0.197
Thread milling
3,16 13,0 35 86,84 91,7 8,0 6,8
T34-R45H01C03-8X1.25-65R 10138971 M8 1,25 8.00X6.20 3 C
0.124 0.512 1.378 3.419 3.610 0.315 0.268
3,81 15,0 39 96,19 101,8 10,0 8,5
T34-R45H01C03-10X1.5-65R 10138972 M10 1,5 10.00X8.00 3 C
0.150 0.591 1.535 3.787 4.008 0.394 0.335
Thread tapping
Annex
359
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
4,47 18,0 83 105,53 110,0 9,0 10,2
T34-R45H01C06-12X1.75-65R 10138973 M12 1,75 9.00X7.00 3 C
Mini-Shaft™
0.176 0.709 3.268 4.155 4.331 0.354 0.402

5,11 20,0 81 104,89 110,0 11,0 12,0
T34-R45H01C06-14X2-65R 10138974 M14 2,0 11.00X9.00 4 C
0.201 0.787 3.189 4.130 4.331 0.433 0.472
5,21 20,0 68 104,79 110,0 12,0 14,0
T34-R45H01C06-16X2-65R 10138975 M16 2,0 12.00X9.00 4 C
0.205 0.787 2.677 4.126 4.331 0.472 0.551
6,28 25,0 81 118,72 125,0 14,0 15,5
T34-R45H01C06-18X2.5-65R 10138976 M18 2,5 14.00X11.00 4 C
0.247 0.984 3.189 4.674 4.921 0.551 0.610
6,28 25,0 95 133,72 140,0 16,0 17,5
T34-R45H01C06-20X2.5-65R 10138977 M20 2,5 16.00X12.00 4 C
0.247 0.984 3.740 5.265 5.512 0.630 0.689
6,28 25,0 93 133,72 140,0 18,0 19,5
T34-R45H01C06-22X2.5-65R 10138978 M22 2,5 18.00X14.50 4 C
0.247 0.984 3.661 5.265 5.512 0.709 0.768
Thread milling
7,48 30,0 113 152,52 160,0 18,0 21,0

T34-R45H01C06-24X3-65R 10138979 M24 3,0 18.00X14.50 4 C
0.294 1.181 4.449 6.005 6.299 0.709 0.827
7,68 30,0 97 152,32 160,0 20,0 24,0
T34-R45H01C06-27X3-65R 10138980 M27 3,0 20.00X16.00 4 C
0.302 1.181 3.819 5.997 6.299 0.787 0.945
8,75 35,0 115 171,25 180,0 22,0 26,5
T34-R45H01C06-30X3.5-65R 10138981 M30 3,5 22.00X18.00 4 C
0.344 1.378 4.528 6.742 7.087 0.866 1.043
8,75 35,0 113 171,25 180,0 25,0 29,5
T34-R45H01C06-33X3.5-65R 10138982 M33 3,5 25.00X20.00 4 C
0.344 1.378 4.449 6.742 7.087 0.984 1.161
10,02 40,0 131 189,98 200,0 28,0 32,0
T34-R45H01C06-36X4-65R 10138983 M36 4,0 28.00X22.00 4 C
0.394 1.575 5.157 7.480 7.874 1.102 1.260
Thread tapping
Annex
360
www.secotools.com
Thread tapping
T34-R45HE
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
Mini-Shaft™
0,81 5,0 18 55,19 56,0 3,5 2,5
T34-R45H01E03-3X0.5-65R 10138991 M3 0,5 3.50X2.70 3 E
0.032 0.197 0.709 2.173 2.205 0.138 0.098
0,94 6,0 20 55,06 56,0 4,0 2,9
T34-R45H01E03-3.5X0.6-65R 10138992 M3.5 0,6 4.00X3.00 3 E
0.037 0.236 0.787 2.168 2.205 0.157 0.114
1,18 7,0 21 61,82 63,0 4,5 3,3
T34-R45H01E03-4X0.7-65R 10138993 M4 0,7 4.50X3.40 3 E
0.046 0.276 0.827 2.434 2.480 0.177 0.130
1,18 7,5 25 68,82 70,0 6,0 3,8
T34-R45H01E03-4.5X0.75-65R 10138994 M4.5 0,75 6.00X4.90 3 E
0.046 0.295 0.984 2.709 2.756 0.236 0.150
1,31 8,0 25 68,69 70,0 6,0 4,2
T34-R45H01E03-5X0.8-65R 10138995 M5 0,8 6.00X4.90 3 E
0.052 0.315 0.984 2.704 2.756 0.236 0.165
1,57 10,0 30 78,43 80,0 6,0 5,0
T34-R45H01E03-6X1-65R 10138996 M6 1,0 6.00X4.90 3 E
Thread milling
0.062 0.394 1.181 3.088 3.150 0.236 0.197
2,23 13,0 35 87,77 90,0 8,0 6,8
T34-R45H01E03-8X1.25-65R 10138997 M8 1,25 8.00X6.20 3 E
0.088 0.512 1.378 3.456 3.543 0.315 0.268
2,6 15,0 39 97,4 100,0 10,0 8,5
T34-R45H01E03-10X1.5-65R 10138998 M10 1,5 10.00X8.00 3 E
0.102 0.591 1.535 3.835 3.937 0.394 0.335
Thread tapping
Annex
361
www.secotools.com
Thread tapping
T34-R45HE
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
3,18 18,0 83 106,82 110,0 9,0 10,2
T34-R45H01E06-12X1.75-65R 10138999 M12 1,75 9.00X7.00 3 E
Mini-Shaft™
0.125 0.709 3.268 4.206 4.331 0.354 0.402

3,65 20,0 81 106,35 110,0 11,0 12,0
T34-R45H01E06-14X2-65R 10139000 M14 2,0 11.00X9.00 4 E
0.144 0.787 3.189 4.187 4.331 0.433 0.472
3,75 20,0 68 106,25 110,0 12,0 14,0
T34-R45H01E06-16X2-65R 10139001 M16 2,0 12.00X9.00 4 E
0.148 0.787 2.677 4.183 4.331 0.472 0.551
Thread milling
Thread tapping
Annex
362
www.secotools.com
Thread tapping
T34A-R45HC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
Mini-Shaft™
1,94 8,0 25 68,06 70,0 6,0 4,2
T34A-R45H01C03-5X0.8-65R 10138984 M5 0,8 6.00X4.90 3 C
0.076 0.315 0.984 2.680 2.756 0.236 0.165
2,32 10,0 30 77,68 80,0 6,0 5,0
T34A-R45H01C03-6X1-65R 10138985 M6 1,0 6.00X4.90 3 C
0.091 0.394 1.181 3.058 3.150 0.236 0.197
3,16 13,0 35 86,84 90,0 8,0 6,8
T34A-R45H01C03-8X1.25-65R 10138986 M8 1,25 8.00X6.20 3 C
0.124 0.512 1.378 3.419 3.543 0.315 0.268
3,81 17,0 39 96,19 100,0 10,0 8,5
T34A-R45H01C05-10X1.5-65R 10138987 M10 1,5 10.00X8.00 3 C
0.150 0.669 1.535 3.787 3.937 0.394 0.335
Thread milling
Thread tapping
Annex
363
www.secotools.com
Thread tapping
T34A-R45HC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
Mini-Shaft™
4,47 18,0 83 105,53 110,0 9,0 10,2

T34A-R45H01C06-12X1.75-65R 10138988 M12 1,75 9.00X7.00 3 C
0.176 0.709 3.268 4.155 4.331 0.354 0.402
5,11 20,0 81 104,89 110,0 11,0 12,0
T34A-R45H01C06-14X2-65R 10138989 M14 2,0 11.00X9.00 4 C
0.201 0.787 3.189 4.130 4.331 0.433 0.472
5,21 20,0 68 104,79 110,0 12,0 14,0
T34A-R45H01C06-16X2-65R 10138990 M16 2,0 12.00X9.00 4 C
0.205 0.787 2.677 4.126 4.331 0.472 0.551
Thread milling
Thread tapping
Annex
364
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
0,7 5,0 18 55,3 57,2 3,5 2,65
T34-R45H02C03-3X0.35-65R 10139002 MF3X0.35 0,35 3.50X2.70 3 C
Mini-Shaft™
0.028 0.197 0.709 2.177 2.252 0.138 0.104
0,69 5,0 20 55,31 57,4 4,0 3,15
T34-R45H02C03-3.5X0.35-65R 10139003 MF3.5X0.35 0,35 4.00X3.00 3 C
0.027 0.197 0.787 2.178 2.260 0.157 0.124
1,31 7,0 21 61,69 64,6 4,5 3,5
T34-R45H02C03-4X0.5-65R 10139004 MF4X0.5 0,5 4.50X3.40 3 C
0.052 0.276 0.827 2.429 2.543 0.177 0.138
1,2 8,0 25 68,8 72,0 6,0 4,5
T34-R45H02C03-5X0.5-65R 10139005 MF5X0.5 0,5 6.00X4.90 3 C
0.047 0.315 0.984 2.709 2.835 0.236 0.177
1,22 10,0 30 78,78 82,4 6,0 5,5
T34-R45H02C03-6X0.5-65R 10139006 MF6X0.5 0,5 6.00X4.90 3 C
0.048 0.394 1.181 3.102 3.244 0.236 0.217
1,77 10,0 30 78,23 82,4 6,0 5,2
T34-R45H02C03-6X0.75-65R 10139007 MF6X0.75 0,75 6.00X4.90 3 C
0.070 0.394 1.181 3.080 3.244 0.236 0.205
Thread milling
2,07 10,0 30 77,93 81,7 8,0 7,2
T34-R45H02C03-8X0.75-65R 10139008 MF8X0.75 0,75 8.00X6.20 3 C
0.081 0.394 1.181 3.068 3.217 0.315 0.283
2,62 13,0 35 87,38 91,7 8,0 7,0
T34-R45H02C03-8X1-65R 10139009 MF8X1.0 1,0 8.00X6.20 3 C
0.103 0.512 1.378 3.440 3.610 0.315 0.276
2,17 13,0 35 87,83 91,8 10,0 9,2
T34-R45H02C03-10X0.75-65R 10139011 MF10X0.75 0,75 10.00X8.00 3 C
0.085 0.512 1.378 3.458 3.614 0.394 0.362
2,72 13,0 35 87,28 91,8 10,0 9,0
T34-R45H02C03-10X1-65R 10139012 MF10X1.0 1,0 10.00X8.00 3 C
0.107 0.512 1.378 3.436 3.614 0.394 0.354
3,26 15,0 39 96,74 101,8 10,0 8,8
T34-R45H02C03-10X1.25-65R 10139013 MF10X1.25 1,25 10.00X8.00 3 C
0.128 0.591 1.535 3.809 4.008 0.394 0.346 Thread tapping
Annex
365
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
2,62 10,0 35 87,38 90,0 6,0 7,0
T34-R45H02C05-8X1-65R 10139014 MF8X1.0 1,0 6.00X4.90 3 C
Mini-Shaft™
0.103 0.394 1.378 3.440 3.543 0.236 0.276

2,62 10,0 35 87,38 90,0 7,0 9,0
T34-R45H02C05-10X1-65R 10139015 MF10X1.0 1,0 7.00X5.50 3 C
0.103 0.394 1.378 3.440 3.543 0.276 0.354
2,83 10,0 73 97,17 100,0 9,0 11,0
T34-R45H02C05-12X1-65R 10139016 MF12X1.0 1,0 9.00X7.00 3 C
0.111 0.394 2.874 3.826 3.937 0.354 0.433
3,38 15,0 73 96,62 100,0 9,0 10,8
T34-R45H02C05-12X1.25-65R 10139017 MF12X1.25 1,25 9.00X7.00 3 C
0.133 0.591 2.874 3.804 3.937 0.354 0.425
3,93 15,0 73 96,07 100,0 9,0 10,5
T34-R45H02C05-12X1.5-65R 10139018 MF12X1.5 1,5 9.00X7.00 3 C
0.155 0.591 2.874 3.782 3.937 0.354 0.413
4,03 15,0 71 95,97 100,0 11,0 12,5
T34-R45H02C05-14X1.5-65R 10139019 MF14X1.5 1,5 11.00X9.00 4 C
0.159 0.591 2.795 3.778 3.937 0.433 0.492
Thread milling
4,13 15,0 58 95,87 100,0 12,0 14,5

T34-R45H02C05-16X1.5-65R 10139020 MF16X1.5 1,5 12.00X9.00 4 C
0.163 0.591 2.283 3.774 3.937 0.472 0.571
4,13 17,0 66 105,87 110,0 14,0 16,5
T34-R45H02C05-18X1.5-65R 10139021 MF18X1.5 1,5 14.00X11.00 4 C
0.163 0.669 2.598 4.168 4.331 0.551 0.650
4,13 17,0 80 120,87 125,0 16,0 18,5
T34-R45H02C05-20X1.5-65R 10139022 MF20X1.5 1,5 16.00X12.00 4 C
0.163 0.669 3.150 4.759 4.921 0.630 0.728
4,13 17,0 78 120,87 125,0 18,0 20,5
T34-R45H02C05-22X1.5-65R 10139023 MF22X1.5 1,5 18.00X14.50 4 C
0.163 0.669 3.071 4.759 4.921 0.709 0.807
4,25 20,0 93 135,75 140,0 18,0 22,5
T34-R45H02C05-24X1.5-65R 10139024 MF24X1.5 1,5 18.00X14.50 4 C
0.167 0.787 3.661 5.344 5.512 0.709 0.886
Thread tapping
Annex
366
www.secotools.com
Thread tapping
T34-R45HE
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
1,87 13,0 35 88,13 90,0 8,0 7,0
T34-R45H02E03-8X1-65R 10139032 MF8X1.0 1,0 8.00X6.20 3 E
Mini-Shaft™
0.074 0.512 1.378 3.470 3.543 0.315 0.276
1,97 13,0 35 88,03 90,0 10,0 9,0
T34-R45H02E03-10X1-65R 10139033 MF10X1.0 1,0 10.00X8.00 3 E
0.078 0.512 1.378 3.466 3.543 0.394 0.354
Thread milling
Thread tapping
Annex
367
www.secotools.com
Thread tapping
T34-R45HE
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
1,87 10,0 35 88,13 90,0 6,0 7,0
T34-R45H02E05-8X1-65R 10139034 MF8X1.0 1,0 6.00X4.90 3 E
Mini-Shaft™
0.074 0.394 1.378 3.470 3.543 0.236 0.276

1,87 10,0 35 88,13 90,0 7,0 9,0
T34-R45H02E05-10X1-65R 10139035 MF10X1.0 1,0 7.00X5.50 3 E
0.074 0.394 1.378 3.470 3.543 0.276 0.354
2,81 15,0 73 97,19 100,0 9,0 10,5
T34-R45H02E05-12X1.5-65R 10139036 MF12X1.5 1,5 9.00X7.00 3 E
0.111 0.591 2.874 3.826 3.937 0.354 0.413
3,01 15,0 71 96,99 100,0 11,0 12,5
T34-R45H02E05-14X1.5-65R 10139037 MF14X1.5 1,5 11.00X9.00 4 E
0.119 0.591 2.795 3.819 3.937 0.433 0.492
3,01 15,0 58 96,99 100,0 12,0 14,5
T34-R45H02E05-16X1.5-65R 10139038 MF16X1.5 1,5 12.00X9.00 4 E
0.119 0.591 2.283 3.819 3.937 0.472 0.571
Thread milling
Thread tapping
Annex
368
www.secotools.com
Thread tapping
T34A-R45HC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
Mini-Shaft™
2,62 13,0 35 87,38 90,0 8,0 7,0
T34A-R45H02C03-8X1-65R 10139025 MF8X1.0 1,0 8.00X6.20 3 C
0.103 0.512 1.378 3.440 3.543 0.315 0.276
2,72 13,0 35 87,28 90,0 10,0 9,0
T34A-R45H02C03-10X1-65R 10139026 MF10X1.0 1,0 10.00X8.00 3 C
0.107 0.512 1.378 3.436 3.543 0.394 0.354
Thread milling
Thread tapping
Annex
369
www.secotools.com
Thread tapping
T34A-R45HC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
Mini-Shaft™
2,62 10,0 35 87,38 90,0 6,0 7,0

T34A-R45H02C05-8X1-65R 10139027 MF8X1.0 1,0 6.00X4.90 3 C
0.103 0.394 1.378 3.440 3.543 0.236 0.276
2,62 10,0 35 87,38 90,0 7,0 9,0
T34A-R45H02C05-10X1-65R 10139028 MF10X1.0 1,0 7.00X5.50 3 C
0.103 0.394 1.378 3.440 3.543 0.276 0.354
3,93 15,0 73 96,07 100,0 9,0 10,5
T34A-R45H02C05-12X1.5-65R 10139029 MF12X1.5 1,5 9.00X7.00 3 C
0.155 0.591 2.874 3.782 3.937 0.354 0.413
4,03 15,0 71 95,97 100,0 11,0 12,5
T34A-R45H02C05-14X1.5-65R 10139030 MF14X1.5 1,5 11.00X9.00 4 C
0.159 0.591 2.795 3.778 3.937 0.433 0.492
4,13 15,0 58 95,87 100,0 12,0 14,5
T34A-R45H02C05-16X1.5-65R 10139031 MF16X1.5 1,5 12.00X9.00 4 C
0.163 0.591 2.283 3.774 3.937 0.472 0.571
Thread milling
Thread tapping
Annex
370
www.secotools.com
Thread tapping
T34A-R45HE
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
Mini-Shaft™
1,87 13,0 35 88,13 90,0 8,0 7,0
T34A-R45H02E03-8X1-65R 10139039 MF8X1.0 1,0 8.00X6.20 3 E
0.074 0.512 1.378 3.470 3.543 0.315 0.276
1,97 13,0 35 88,03 90,0 10,0 9,0
T34A-R45H02E03-10X1-65R 10139040 MF10X1.0 1,0 10.00X8.00 3 E
0.078 0.512 1.378 3.466 3.543 0.394 0.354
Thread milling
Thread tapping
Annex
371
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
2,845 1,48 5,0 18 54,52 56,0 3,5 2,35
T34-R45H08C03-4-40-22R 10139054 UNC4-40 40.0 3.50X2.70 3 C
Mini-Shaft™
0.112 0.058 0.197 0.709 2.146 2.205 0.138 0.093

3,175 1,53 7,0 18 54,47 57,2 3,5 2,65
T34-R45H08C03-5-40-22R 10139055 UNC5-40 40.0 3.50X2.70 3 C
0.125 0.060 0.276 0.709 2.144 2.252 0.138 0.104
3,505 1,95 6,0 20 54,05 57,4 4,0 2,85
T34-R45H08C03-6-32-22R 10139056 UNC6-32 32.0 4.00X3.00 3 C
0.138 0.077 0.236 0.787 2.128 2.260 0.157 0.112
4,166 1,89 7,0 21 61,11 64,6 4,5 3,5
T34-R45H08C03-8-32-22R 10139057 UNC8-32 32.0 4.50X3.40 3 C
0.164 0.074 0.276 0.827 2.406 2.543 0.177 0.138
4,826 2,53 8,0 25 67,47 72,0 6,0 3,9
T34-R45H08C03-10-24-22R 10139058 UNC10-24 24.0 6.00X4.90 3 C
0.190 0.100 0.315 0.984 2.656 2.835 0.236 0.154
5,486 2,47 10,0 30 77,53 82,2 6,0 4,5
T34-R45H08C03-12-24-22R 10139059 UNC12-24 24.0 6.00X4.90 3 C
0.216 0.097 0.394 1.181 3.052 3.236 0.236 0.177
Thread milling
6,35 2,94 13,0 32 77,06 82,4 7,0 5,1

T34-R45H08C03-1/4-20-22R 10139060 UNC1/4-20 20.0 7.00X5.50 3 C
0.250 0.116 0.512 1.260 3.034 3.244 0.276 0.201
7,937 3,59 13,0 35 86,41 90,0 8,0 6,6
T34-R45H08C03-5/16-18-22R 10139061 UNC5/16-18 18.0 8.00X6.20 3 C
0.312 0.141 0.512 1.378 3.402 3.543 0.315 0.260
9,525 4,03 15,0 39 95,97 100,0 10,0 8,0
T34-R45H08C03-3/8-16-22R 10139062 UNC3/8-16 16.0 10.00X8.00 3 C
0.375 0.159 0.591 1.535 3.778 3.937 0.394 0.315
Thread tapping
Annex
372
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
11,112 4,65 15,0 76 95,35 100,0 8,0 9,3
T34-R45H08C06-7/16-14-22R 10139063 UNC7/16-14 14.0 8.00X6.20 3 C
Mini-Shaft™
0.437 0.183 0.591 2.992 3.754 3.937 0.315 0.366
12,7 4,99 18,0 83 105,01 110,0 9,0 10,7
T34-R45H08C06-1/2-13-22R 10139064 UNC1/2-13 13.0 9.00X7.00 4 C
0.500 0.196 0.709 3.268 4.134 4.331 0.354 0.421
14,287 5,43 20,0 81 104,57 110,0 11,0 12,3
T34-R45H08C06-9/16-12-22R 10139065 UNC9/16-12 12.0 11.00X9.00 4 C
0.562 0.214 0.787 3.189 4.117 4.331 0.433 0.484
15,875 5,87 22,0 68 104,13 110,0 12,0 13,5
T34-R45H08C06-5/8-11-22R 10139066 UNC5/8-11 11.0 12.00X9.00 4 C
0.625 0.231 0.866 2.677 4.100 4.331 0.472 0.531
Thread milling
Thread tapping
Annex
373
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
2,845 1,29 5,0 18 54,71 57,2 3,5 2,4
T34-R45H09C03-4-48-22R 10139067 UNF4-48 48.0 3.50X2.70 3 C
Mini-Shaft™
0.112 0.051 0.197 0.709 2.154 2.252 0.138 0.094

3,175 1,35 7,0 18 54,65 57,2 3,5 2,7
T34-R45H09C03-5-44-22R 10139068 UNF5-44 44.0 3.50X2.70 3 C
0.125 0.053 0.276 0.709 2.152 2.252 0.138 0.106
3,505 1,59 6,0 20 54,41 57,4 4,0 2,95
T34-R45H09C03-6-40-22R 10139073 UNF6-40 40.0 4.00X3.00 3 C
0.138 0.063 0.236 0.787 2.142 2.260 0.157 0.116
4,166 1,71 7,0 21 61,29 64,6 4,5 3,5
T34-R45H09C03-8-36-22R 10139074 UNF8-36 36.0 4.50X3.40 3 C
0.164 0.067 0.276 0.827 2.413 2.543 0.177 0.138
4,826 2,0 8,0 25 68,0 72,0 6,0 4,1
T34-R45H09C03-10-32-22R 10139075 UNF10-32 32.0 6.00X4.90 3 C
0.190 0.079 0.315 0.984 2.677 2.835 0.236 0.161
5,486 2,11 10,0 30 77,89 82,2 6,0 4,6
T34-R45H09C03-12-28-22R 10139076 UNF12-28 28.0 6.00X4.90 3 C
0.216 0.083 0.394 1.181 3.067 3.236 0.236 0.181
Thread milling
6,35 2,23 10,0 30 77,77 82,4 7,0 5,5

T34-R45H09C03-1/4-28-22R 10139077 UNF1/4-28 28.0 7.00X5.50 3 C
0.250 0.088 0.394 1.181 3.062 3.244 0.276 0.217
7,937 2,87 13,0 35 87,13 90,0 8,0 6,9
T34-R45H09C03-5/16-24-22R 10139078 UNF5/16-24 24.0 8.00X6.20 3 C
0.312 0.113 0.512 1.378 3.430 3.543 0.315 0.272
9,525 2,96 15,0 35 87,04 90,0 10,0 8,5
T34-R45H09C03-3/8-24-22R 10139079 UNF3/8-24 24.0 10.00X8.00 3 C
0.375 0.117 0.591 1.378 3.427 3.543 0.394 0.335
Thread tapping
Annex
374
www.secotools.com
Thread tapping
T34-R45HC
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
11,112 3,39 15,0 76 96,61 100,0 8,0 9,9
T34-R45H09C05-7/16-20-22R 10139080 UNF7/16-20 20.0 8.00X6.20 3 C
Mini-Shaft™
0.437 0.133 0.591 2.992 3.804 3.937 0.315 0.390
12,7 3,56 15,0 73 96,44 100,0 9,0 11,5
T34-R45H09C05-1/2-20-22R 10139081 UNF1/2-20 20.0 9.00X7.00 4 C
0.500 0.140 0.591 2.874 3.797 3.937 0.354 0.453
14,287 3,86 15,0 71 96,14 100,0 11,0 13,0
T34-R45H09C05-9/16-18-22R 10139082 UNF9/16-18 18.0 11.00X9.00 4 C
0.562 0.152 0.591 2.795 3.785 3.937 0.433 0.512
15,875 3,91 15,0 58 96,09 100,0 12,0 14,5
T34-R45H09C05-5/8-18-22R 10139083 UNF5/8-18 18.0 12.00X9.00 4 C
0.625 0.154 0.591 2.283 3.783 3.937 0.472 0.571
Thread milling
Thread tapping
Annex
375
www.secotools.com
Thread tapping
T34-R45HC
Blind holes – G threads
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
9,728 2,43 10,0 36 87,57 90,0 7,0 8,8
T34-R45H21C09-1/8-28-12R 10139084 G1/8-28 28.0 7.00X5.50 3 C
Mini-Shaft™
0.383 0.096 0.394 1.417 3.448 3.543 0.276 0.346

13,157 3,66 14,0 71 96,34 100,0 11,0 11,8
T34-R45H21C09-1/4-19-12R 10139085 G1/4-19 19.0 11.00X9.00 3 C
0.518 0.144 0.551 2.795 3.793 3.937 0.433 0.465
16,662 3,67 15,0 58 96,33 100,0 12,0 15,25
T34-R45H21C09-3/8-19-12R 10139086 G3/8-19 19.0 12.00X9.00 4 C
0.656 0.144 0.591 2.283 3.793 3.937 0.472 0.600
20,955 4,93 17,0 80 120,07 125,0 16,0 19,0
T34-R45H21C09-1/2-14-12R 10139087 G1/2-14 14.0 16.00X12.00 4 C
0.825 0.194 0.669 3.150 4.727 4.921 0.630 0.748
22,911 5,06 20,0 78 119,94 125,0 18,0 21,0
T34-R45H21C09-5/8-14-12R 10139088 G5/8-14 14.0 18.00X14.50 4 C
0.902 0.199 0.787 3.071 4.722 4.921 0.709 0.827
26,441 5,05 20,0 73 134,95 140,0 20,0 24,5
T34-R45H21C09-3/4-14-12R 10139089 G3/4-14 14.0 20.00X16.00 4 C
1.041 0.199 0.787 2.874 5.313 5.512 0.787 0.965
Thread milling
30,201 4,98 22,0 85 145,02 150,0 22,0 28,25

T34-R45H21C09-7/8-14-12R 10139090 G7/8-14 14.0 22.00X18.00 4 C
1.189 0.196 0.866 3.346 5.709 5.906 0.866 1.112
33,249 6,56 24,0 93 153,44 160,0 25,0 30,75
T34-R45H21C09-1-11-12R 10139091 G1-11 11.0 25.00X20.00 4 C
1.309 0.258 0.945 3.661 6.041 6.299 0.984 1.211
Thread tapping
Annex
376
www.secotools.com
Thread tapping
T34-R45HE
Blind holes – EGM threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
0,73 5,0 14 49,27 50,0 2,8 2,1
T34-R45H04E03-2X0.4-64R 10139092 EGM2 0,4 2.80X2.10 2 E
Mini-Shaft™
0.029 0.197 0.551 1.940 1.969 0.110 0.083
0,75 5,0 18 55,25 56,0 3,5 2,65
T34-R45H04E03-2.5X0.45-64R 10139093 EGM2.5 0,45 3.50X2.70 3 E
0.030 0.197 0.709 2.175 2.205 0.138 0.104
0,83 5,0 21 62,17 63,0 4,5 3,15
T34-R45H04E03-3X0.5-64R 10139094 EGM3 0,5 4.50X3.40 3 E
0.033 0.197 0.827 2.448 2.480 0.177 0.124
1,15 8,0 25 68,85 70,0 6,0 4,2
T34-R45H04E03-4X0.7-64R 10139095 EGM4 0,7 6.00X4.90 3 E
0.045 0.315 0.984 2.711 2.756 0.236 0.165
1,19 10,0 30 78,81 80,0 6,0 5,25
T34-R45H04E03-5X0.8-64R 10139096 EGM5 0,8 6.00X4.90 3 E
0.047 0.394 1.181 3.103 3.150 0.236 0.207
1,81 10,0 35 88,19 90,0 8,0 6,3
T34-R45H04E03-6X1-64R 10139097 EGM6 1,0 8.00X6.20 3 E
0.071 0.394 1.378 3.472 3.543 0.315 0.248
Thread milling
2,2 13,0 39 97,8 100,0 10,0 8,4
T34-R45H04E03-8X1.25-64R 10139098 EGM8 1,25 10.00X8.00 3 E
0.087 0.512 1.535 3.850 3.937 0.394 0.331
Thread tapping
Annex
377
www.secotools.com
Thread tapping
T34-R45HE
Blind holes – EGM threads
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
mm
2,83 15,0 73 97,17 100,0 9,0 10,5
T34-R45H04E06-10X1.5-64R 10139111 EGM10 1,5 9.00X7.00 3 E
Mini-Shaft™
0.111 0.591 2.874 3.826 3.937 0.354 0.413

3,21 20,0 81 106,79 110,0 11,0 12,5
T34-R45H04E06-12X1.75-64R 10139112 EGM12 1,75 11.00X9.00 4 E
0.126 0.787 3.189 4.204 4.331 0.433 0.492
3,67 20,0 68 106,33 110,0 12,0 14,5
T34-R45H04E06-14X2-64R 10139113 EGM14 2,0 12.00X9.00 4 E
0.144 0.787 2.677 4.186 4.331 0.472 0.571
3,67 20,0 81 121,33 125,0 14,0 16,5
T34-R45H04E06-16X2-64R 10139114 EGM16 2,0 14.00X11.00 4 E
0.144 0.787 3.189 4.777 4.921 0.551 0.650
4,45 27,0 93 135,55 140,0 18,0 18,75
T34-R45H04E06-18X2.5-64R 10139115 EGM18 2,5 18.00X14.50 4 E
0.175 1.063 3.661 5.337 5.512 0.709 0.738
4,55 30,0 113 155,45 160,0 18,0 20,75
T34-R45H04E06-20X2.5-64R 10139116 EGM20 2,5 18.00X14.50 4 E
0.179 1.181 4.449 6.120 6.299 0.709 0.817
Thread milling
Thread tapping
Annex
378
www.secotools.com
Thread tapping
T34-R45HE
Blind holes – EGUNC threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
3,67 1,0 7,0 21 62,0 63,0 4,5 3,1
T34-R45H16E03-4-40-21R 10139099 EGUNC4-40 40.0 4.50X3.40 3 E
Mini-Shaft™
0.144 0.039 0.276 0.827 2.441 2.480 0.177 0.122
4,536 1,32 8,0 25 68,68 70,0 6,0 3,8
T34-R45H16E03-6-32-21R 10139100 EGUNC6-32 32.0 6.00X4.90 3 E
0.179 0.052 0.315 0.984 2.704 2.756 0.236 0.150
5,197 1,32 10,0 30 78,68 80,0 6,0 4,4
T34-R45H16E03-8-32-21R 10139101 EGUNC8-32 32.0 6.00X4.90 3 E
0.205 0.052 0.394 1.181 3.098 3.150 0.236 0.173
6,2 1,64 12,0 30 78,36 80,0 7,0 5,2
T34-R45H16E03-10-24-21R 10139102 EGUNC10-24 24.0 7.00X5.50 3 E
0.244 0.065 0.472 1.181 3.085 3.150 0.276 0.205
8,001 2,29 15,0 35 87,71 90,0 8,0 6,7
T34-R45H16E03-1/4-20-21R 10139103 EGUNC1/4-20 20.0 8.00X6.20 3 E
0.315 0.090 0.591 1.378 3.453 3.543 0.315 0.264
9,771 2,5 18,0 39 97,5 100,0 10,0 8,4
T34-R45H16E03-5/16-18-21R 10139104 EGUNC5/16-18 18.0 10.00X8 3 E
0.385 0.098 0.709 1.535 3.839 3.937 0.394 0.331
Thread milling
Thread tapping
Annex
379
www.secotools.com
Thread tapping
T34-R45HE
Blind holes – EGUNC threads
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
11,587 2,99 15,0 73 97,01 100,0 9,0 10,0
T34-R45H16E06-3/8-16-21R 10139117 EGUNC3/8-16 16.0 9.00X7.00 3 E
Mini-Shaft™
0.456 0.118 0.591 2.874 3.819 3.937 0.354 0.394

13,47 3,3 18,0 81 106,7 110,0 11,0 11,6
T34-R45H16E06-7/16-14-21R 10139118 EGUNC7/16-14 14.0 11.00X9.00 3 E
0.530 0.130 0.709 3.189 4.201 4.331 0.433 0.457
15,237 3,74 18,0 68 106,26 110,0 12,0 13,3
T34-R45H16E06-1/2-13-21R 10139119 EGUNC1/2-13 13.0 12.00X9.00 3 E
0.600 0.147 0.709 2.677 4.183 4.331 0.472 0.524
17,038 3,6 20,0 68 106,4 110,0 12,0 14,9
T34-R45H16E06-9/16-12-21R 10139120 EGUNC9/16-12 12.0 12.00X9.00 4 E
0.671 0.142 0.787 2.677 4.189 4.331 0.472 0.587
18,875 4,3 20,0 81 120,7 125,0 14,0 16,5
T34-R45H16E06-5/8-11-21R 10139121 EGUNC5/8-11 11.0 14.00X11.00 4 E
0.743 0.169 0.787 3.189 4.752 4.921 0.551 0.650
22,349 4,8 25,0 93 135,2 140,0 18,0 19,75
T34-R45H16E06-3/4-10-21R 10139122 EGUNC3/4-10 10.0 18.00X14.50 4 E
0.880 0.189 0.984 3.661 5.323 5.512 0.709 0.778
Thread milling
Thread tapping
Annex
380
www.secotools.com
Thread tapping
T34-R45HE
Blind holes – EGUNF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
3,533 0,83 6,0 20 55,17 56,0 4,0 3,0
T34-R45H17E03-4-48-21R 10139105 EGUNF4-48 48.0 4.00X3.00 3 E
Mini-Shaft™
0.139 0.033 0.236 0.787 2.172 2.205 0.157 0.118
4,331 1,12 7,0 25 68,88 70,0 6,0 3,7
T34-R45H17E03-6-40-21R 10139106 EGUNF6-40 40.0 6.00X4.90 3 E
0.171 0.044 0.276 0.984 2.712 2.756 0.236 0.146
5,083 1,32 9,0 30 78,68 80,0 6,0 4,4
T34-R45H17E03-8-36-21R 10139107 EGUNF8-36 36.0 6.00X4.90 3 E
0.200 0.052 0.354 1.181 3.098 3.150 0.236 0.173
5,857 1,23 9,0 30 78,77 80,0 6,0 5,1
T34-R45H17E03-10-32-21R 10139108 EGUNF10-32 32.0 6.00X4.90 3 E
0.231 0.048 0.354 1.181 3.101 3.150 0.236 0.201
7,529 1,74 10,0 35 88,26 90,0 8,0 6,6
T34-R45H17E03-1/4-28-21R 10139109 EGUNF1/4-28 28.0 8.00X6.20 3 E
0.296 0.069 0.394 1.378 3.475 3.543 0.315 0.260
9,312 2,52 12,0 35 87,48 90,0 10,0 8,25
T34-R45H17E03-5/16-24-21R 10139110 EGUNF5/16-24 24.0 10.00X8.00 3 E
0.367 0.099 0.472 1.378 3.444 3.543 0.394 0.325
Thread milling
Thread tapping
Annex
381
www.secotools.com
Thread tapping
T34-R45HE
Thread turning
LF
TCL
DCONMS
TD CZCMS
FHA
THL
LU
OAL
MDT
• FHA = 45°
TPI
10,899 2,0 12,0 66 88,0 90,0 8,0 9,8
T34-R45H17E06-3/8-24-21R 10139123 EGUNF3/8-24 24.0 8.00X6.00 3 E
Mini-Shaft™
0.429 0.079 0.472 2.598 3.465 3.543 0.315 0.386

12,763 2,5 15,0 73 97,5 100,0 9,0 11,5
T34-R45H17E06-7/16-20-21R 10139124 EGUNF7/16-20 20.0 9.00X7.00 3 E
0.502 0.098 0.591 2.874 3.839 3.937 0.354 0.453
14,351 2,5 15,0 71 97,5 100,0 11,0 13,1
T34-R45H17E06-1/2-20-21R 10139125 EGUNF1/2-20 20.0 11.00X9.00 3 E
0.565 0.098 0.591 2.795 3.839 3.937 0.433 0.516
16,121 2,58 15,0 58 97,42 100,0 12,0 14,7
T34-R45H17E06-9/16-18-21R 10139126 EGUNF9/16-18 18.0 12.00X9.00 4 E
0.635 0.102 0.591 2.283 3.835 3.937 0.472 0.579
17,709 2,7 15,0 66 107,3 110,0 14,0 16,25
T34-R45H17E06-5/8-18-21R 10139127 EGUNF5/8-18 18.0 14.00X11.00 4 E
0.697 0.106 0.591 2.598 4.224 4.331 0.551 0.640
21,112 3,0 17,0 80 122,0 125,0 16,0 19,5
T34-R45H17E06-3/4-16-21R 10139128 EGUNF3/4-16 16.0 16.00X12.00 4 E
0.831 0.118 0.669 3.150 4.803 4.921 0.630 0.768
Thread milling
Thread tapping
Annex
382
www.secotools.com
Thread tapping
T33-FNC
Forming taps – Blind and through holes – Metric coarse threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,02 8,0 8 43,98 46,3 2,8 1,85
T33-FN01C03-2X0.4-65R 10139189 M2 0,4 2.80X2.10 0 C
0.040 0.315 0.315 1.731 1.823 0.110 0.073
Mini-Shaft™
1,1 9,0 9 48,9 51,7 2,8 2,33
T33-FN01C03-2.5X0.45-65R 10139190 M2.5 0,45 2.80X2.10 0 C
0.043 0.354 0.354 1.925 2.035 0.110 0.092
1,2 10,0 18 54,8 57,2 3,5 2,8
T33-FN01C03-3X0.5-65R 10139191 M3 0,5 3.50X2.70 0 C
0.047 0.394 0.709 2.157 2.252 0.138 0.110
1,6 7,0 21 61,4 64,6 4,5 3,7
T33-FN01C03-4X0.7-65R 10139192 M4 0,7 4.50X3.40 0 C
0.063 0.276 0.827 2.417 2.543 0.177 0.146
2,1 8,0 25 67,9 72,0 6,0 4,65
T33-FN01C03-5X0.8-65R 10139193 M5 0,8 6.00X4.90 0 C
0.083 0.315 0.984 2.673 2.835 0.236 0.183
2,3 10,0 30 77,7 82,4 6,0 5,6
T33-FN01C03-6X1-65R 10139195 M6 1,0 6.00X4.90 0 C
0.091 0.394 1.181 3.059 3.244 0.236 0.220
3,1 13,0 35 86,9 93,3 8,0 7,45
Thread milling
T33-FN01C03-8X1.25-65R 10139196 M8 1,25 8.00X6.20 0 C
0.122 0.512 1.378 3.421 3.673 0.315 0.293
3,5 15,0 39 96,5 101,8 10,0 9,35
T33-FN01C03-10X1.5-65R 10139197 M10 1,5 10.00X8.00 0 C
0.138 0.591 1.535 3.799 4.008 0.394 0.368
Thread tapping
Annex
383
www.secotools.com
Thread tapping
T33-FNC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
3,7 18,0 83 106,3 110,0 9,0 11,25
T33-FN01C06-12X1.75-65R 10139198 M12 1,75 9.00X7.00 0 C
0.146 0.709 3.268 4.185 4.331 0.354 0.443
Mini-Shaft™
4,6 20,0 81 105,4 110,0 11,0 13,1

T33-FN01C06-14X2-65R 10139199 M14 2,0 11.00X9.00 0 C
0.181 0.787 3.189 4.150 4.331 0.433 0.516
4,6 20,0 81 105,4 110,0 11,0 15,1
T33-FN01C06-16X2-65R 10139200 M16 2,0 11.00X9.00 0 C
0.181 0.787 3.189 4.150 4.331 0.433 0.594
5,76 25,0 81 119,24 125,0 14,0 16,85
T33-FN01C06-18X2.5-65R 10139201 M18 2,5 14.00X11.00 0 C
0.227 0.984 3.189 4.694 4.921 0.551 0.663
5,8 25,0 95 134,2 140,0 16,0 18,85
T33-FN01C06-20X2.5-65R 10139202 M20 2,5 16.00X12.00 0 C
0.228 0.984 3.740 5.283 5.512 0.630 0.742
Thread milling
Thread tapping
Annex
384
www.secotools.com
Thread tapping
T33-FSNC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,02 8,0 8 43,98 46,3 2,8 1,85
T33-FSN01C03-2X0.4-65R 10139204 M2 0,4 2.80X2.10 3 C
0.040 0.315 0.315 1.731 1.823 0.110 0.073
Mini-Shaft™
1,1 9,0 9 48,9 51,7 2,8 2,33
T33-FSN01C03-2.5X0.45-65R 10139205 M2.5 0,45 2.80X2.10 3 C
0.043 0.354 0.354 1.925 2.035 0.110 0.092
1,2 10,0 18 54,8 57,2 3,5 2,8
T33-FSN01C03-3X0.5-65R 10139206 M3 0,5 3.50X2.70 3 C
0.047 0.394 0.709 2.157 2.252 0.138 0.110
1,6 7,0 21 61,4 64,6 4,5 3,7
T33-FSN01C03-4X0.7-65R 10139207 M4 0,7 4.50X3.40 5 C
0.063 0.276 0.827 2.417 2.543 0.177 0.146
2,1 8,0 25 67,9 72,0 6,0 4,65
T33-FSN01C03-5X0.8-65R 10139208 M5 0,8 6.00X4.90 5 C
0.083 0.315 0.984 2.673 2.835 0.236 0.183
2,3 10,0 30 77,7 82,4 6,0 5,6
T33-FSN01C03-6X1-65R 10139209 M6 1,0 6.00X4.90 5 C
0.091 0.394 1.181 3.059 3.244 0.236 0.220
3,1 13,0 35 86,9 93,3 8,0 7,45
Thread milling
T33-FSN01C03-8X1.25-65R 10139210 M8 1,25 8.00X6.20 5 C
0.122 0.512 1.378 3.421 3.673 0.315 0.293
3,5 15,0 39 96,5 101,8 10,0 9,35
T33-FSN01C03-10X1.5-65R 10139211 M10 1,5 10.00X8.00 5 C
0.138 0.591 1.535 3.799 4.008 0.394 0.368
Thread tapping
Annex
385
www.secotools.com
Thread tapping
T33-FSNC
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
3,9 18,0 83 106,1 110,0 9,0 11,25
T33-FSN01C06-12X1.75-65R 10139212 M12 1,75 9.00X7.00 5 C
0.154 0.709 3.268 4.177 4.331 0.354 0.443
Mini-Shaft™
4,77 20,0 81 105,23 110,0 11,0 13,1

T33-FSN01C06-14X2-65R 10139213 M14 2,0 11.00X9.00 6 C
0.188 0.787 3.189 4.143 4.331 0.433 0.516
4,6 20,0 81 105,4 110,0 11,0 15,1
T33-FSN01C06-16X2-65R 10139214 M16 2,0 11.00X9.00 6 C
0.181 0.787 3.189 4.150 4.331 0.433 0.594
5,76 25,0 81 119,24 125,0 14,0 16,85
T33-FSN01C06-18X2.5-65R 10139215 M18 2,5 14.00X11.00 6 C
0.227 0.984 3.189 4.694 4.921 0.551 0.663
5,47 25,0 95 134,53 140,0 16,0 18,85
T33-FSN01C06-20X2.5-65R 10139216 M20 2,5 16.00X12.00 6 C
0.215 0.984 3.740 5.296 5.512 0.630 0.742
Thread milling
Thread tapping
Annex
386
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – Metric coarse threads, 6GX
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Thread tolerance class: 6GX
mm
1,2 10,0 18 54,8 57,2 3,5 2,8
T33-FSN01C03-3X0.5-62R 10139258 M3 0,5 3.50X2.70 3 C
0.047 0.394 0.709 2.157 2.252 0.138 0.110
Mini-Shaft™
1,7 7,0 21 61,3 64,6 4,5 3,7
T33-FSN01C03-4X0.7-62R 10139259 M4 0,7 4.50X3.40 5 C
0.067 0.276 0.827 2.413 2.543 0.177 0.146
2,2 8,0 25 67,8 72,0 6,0 4,65
T33-FSN01C03-5X0.8-62R 10139260 M5 0,8 6.00X4.90 5 C
0.087 0.315 0.984 2.669 2.835 0.236 0.183
2,3 10,0 30 77,7 82,4 6,0 5,6
T33-FSN01C03-6X1-62R 10139261 M6 1,0 6.00X4.90 5 C
0.091 0.394 1.181 3.059 3.244 0.236 0.220
3,2 13,0 35 86,8 93,3 8,0 7,45
T33-FSN01C03-8X1.25-62R 10139262 M8 1,25 8.00X6.20 5 C
0.126 0.512 1.378 3.417 3.673 0.315 0.293
4,4 15,0 39 95,6 101,8 10,0 9,35
T33-FSN01C03-10X1.5-62R 10139263 M10 1,5 10.00X8.00 5 C
0.173 0.591 1.535 3.764 4.008 0.394 0.368
Thread milling
Thread tapping
Annex
387
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – Metric coarse threads, 6GX
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
• Thread tolerance class: 6GX
mm
3,9 18,0 83 106,1 110,0 9,0 11,25
T33-FSN01C06-12X1.75-62R 10139264 M12 1,75 9.00X7.00 5 C
0.154 0.709 3.268 4.177 4.331 0.354 0.443
Mini-Shaft™
4,77 20,0 81 105,23 110,0 11,0 13,1

T33-FSN01C06-14X2-62R 10139265 M14 2,0 11.00X9.00 6 C
0.188 0.787 3.189 4.143 4.331 0.433 0.516
5,88 20,0 81 104,12 110,0 11,0 15,1
T33-FSN01C06-16X2-62R 10139266 M16 2,0 11.00X9.00 6 C
0.231 0.787 3.189 4.099 4.331 0.433 0.594
5,47 25,0 81 119,53 125,0 14,0 16,85
T33-FSN01C06-18X2.5-62R 10139267 M18 2,5 14.00X11.00 6 C
0.215 0.984 3.189 4.706 4.921 0.551 0.663
6,68 25,0 95 133,32 140,0 16,0 18,85
T33-FSN01C06-20X2.5-62R 10139268 M20 2,5 16.00X12.00 6 C
0.263 0.984 3.740 5.249 5.512 0.630 0.742
Thread milling
Thread tapping
Annex
388
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – MF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,4 7,0 21 61,6 64,6 4,5 3,8
T33-FSN02C03-4X0.5-65R 10139217 MF4X0.5 0,5 4.50X3.40 5 C
0.055 0.276 0.827 2.425 2.543 0.177 0.150
Mini-Shaft™
1,2 8,0 25 68,8 72,0 6,0 4,8
T33-FSN02C03-5X0.5-65R 10139218 MF5X0.5 0,5 6.00X4.90 5 C
0.047 0.315 0.984 2.709 2.835 0.236 0.189
1,35 10,0 30 78,65 82,4 6,0 5,8
T33-FSN02C03-6X0.5-65R 10139219 MF6X0.5 0,5 6.00X4.90 5 C
0.053 0.394 1.181 3.096 3.244 0.236 0.228
1,8 10,0 30 78,2 82,4 6,0 5,7
T33-FSN02C03-6X0.75-65R 10139220 MF6X0.75 0,75 6.00X4.90 5 C
0.071 0.394 1.181 3.079 3.244 0.236 0.224
2,25 13,0 35 87,75 93,3 8,0 7,6
T33-FSN02C03-8X1-65R 10139221 MF8X1.0 1,0 8.00X6.20 5 C
0.089 0.512 1.378 3.455 3.673 0.315 0.299
2,9 13,0 35 87,1 91,8 10,0 9,6
T33-FSN02C03-10X1-65R 10139222 MF10X1.0 1,0 10.00X8.00 5 C
0.114 0.512 1.378 3.429 3.614 0.394 0.378
3,1 15,0 39 96,9 101,8 10,0 9,45
Thread milling
T33-FSN02C03-10X1.25-65R 10139223 MF10X1.25 1,25 10.00X8.00 5 C
0.122 0.591 1.535 3.815 4.008 0.394 0.372
Thread tapping
Annex
389
www.secotools.com
Thread tapping
T33-FSNC
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
3,27 10,0 73 96,73 100,0 9,0 11,6
T33-FSN02C05-12X1-65R 10139224 MF12X1.0 1,0 9.00X7.00 5 C
0.129 0.394 2.874 3.808 3.937 0.354 0.457
Mini-Shaft™
3,96 15,0 73 96,04 100,0 9,0 11,45

T33-FSN02C05-12X1.25-65R 10139225 MF12X1.25 1,25 9.00X7.00 5 C
0.156 0.591 2.874 3.781 3.937 0.354 0.451
4,15 15,0 73 95,85 100,0 9,0 11,35
T33-FSN02C05-12X1.5-65R 10139226 MF12X1.5 1,5 9.00X7.00 5 C
0.163 0.591 2.874 3.774 3.937 0.354 0.447
4,33 15,0 71 95,67 100,0 11,0 15,35
T33-FSN02C05-16X1.5-65R 10139227 MF16X1.5 1,5 11.00X9.00 6 C
0.170 0.591 2.795 3.767 3.937 0.433 0.604
4,4 17,0 66 105,6 110,0 14,0 17,35
T33-FSN02C05-18X1.5-65R 10139228 MF18X1.5 1,5 14.00X11.00 6 C
0.173 0.669 2.598 4.157 4.331 0.551 0.683
4,6 17,0 80 120,4 125,0 16,0 19,35
T33-FSN02C05-20X1.5-65R 10139229 MF20X1.5 1,5 16.00X12.00 6 C
0.181 0.669 3.150 4.740 4.921 0.630 0.762
Thread milling
Thread tapping
Annex
390
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – UNC threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
3,175 1,6 7,0 18 54,4 57,2 3,5 2,9
T33-FSN08C03-5-40-22R 10139230 UNC5-40 40.0 3.50X2.70 3 C
0.125 0.063 0.276 0.709 2.142 2.252 0.138 0.114
Mini-Shaft™
3,505 1,8 6,0 20 54,2 57,4 4,0 3,15
T33-FSN08C03-6-32-22R 10139231 UNC6-32 32.0 4.00X3.00 3 C
0.138 0.071 0.236 0.787 2.134 2.260 0.157 0.124
4,166 2,0 7,0 21 61,0 64,6 4,5 3,8
T33-FSN08C03-8-32-22R 10139232 UNC8-32 32.0 4.50X3.40 5 C
0.164 0.079 0.276 0.827 2.402 2.543 0.177 0.150
4,826 2,7 8,0 25 67,3 72,0 6,0 4,35
T33-FSN08C03-10-24-22R 10139233 UNC10-24 24.0 6.00X4.90 5 C
0.190 0.106 0.315 0.984 2.650 2.835 0.236 0.171
5,486 2,7 10,0 30 77,3 82,4 6,0 5,0
T33-FSN08C03-12-24-22R 10139234 UNC12-24 24.0 6.00X4.90 5 C
0.216 0.106 0.394 1.181 3.043 3.244 0.236 0.197
6,35 3,9 13,0 30 76,1 80,0 7,0 5,75
T33-FSN08C03-1/4-20-22R 10139235 UNC1/4-20 20.0 7.00X5.50 5 C
0.250 0.154 0.512 1.181 2.996 3.150 0.276 0.226
7,937 3,6 13,0 35 86,4 93,3 8,2 7,3
Thread milling
T33-FSN08C03-5/16-18-22R 10139236 UNC5/16-18 18.0 8.20X6.20 5 C
0.312 0.142 0.512 1.378 3.402 3.673 0.323 0.287
9,525 4,74 15,0 39 95,26 100,0 10,0 8,8
T33-FSN08C03-3/8-16-22R 10139237 UNC3/8-16 16.0 10.00X8.00 5 C
0.375 0.187 0.591 1.535 3.750 3.937 0.394 0.346
Thread tapping
Annex
391
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – UNC threads
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
11,112 5,4 15,0 76 94,6 100,0 8,0 10,25
T33-FSN08C06-7/16-14-22R 10139238 UNC7/16-14 14.0 8.00X6.20 5 C
0.437 0.213 0.591 2.992 3.724 3.937 0.315 0.404
Mini-Shaft™
12,7 5,8 18,0 83 104,2 110,0 9,0 11,8

T33-FSN08C06-1/2-13-22R 10139239 UNC1/2-13 13.0 9.00X7.00 5 C
0.500 0.228 0.709 3.268 4.102 4.331 0.354 0.465
15,875 6,8 20,0 81 103,2 110,0 12,0 14,8
T33-FSN08C06-5/8-11-22R 10139240 UNC5/8-11 11.0 12.00x9.00 6 C
0.625 0.268 0.787 3.189 4.063 4.331 0.472 0.583
Thread milling
Thread tapping
Annex
392
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – UNF threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
3,175 1,4 7,0 18 54,6 57,2 3,5 2,92
T33-FSN09C03-5-44-22R 10139241 UNF5-44 44.0 3.50X2.70 3 C
0.125 0.055 0.276 0.709 2.150 2.252 0.138 0.115
Mini-Shaft™
3,505 1,6 6,0 20 54,4 57,4 4,0 3,22
T33-FSN09C03-6-40-22R 10139242 UNF6-40 40.0 4.00X3.00 3 C
0.138 0.063 0.236 0.787 2.142 2.260 0.157 0.127
4,166 1,8 7,0 21 61,2 64,6 4,5 3,85
T33-FSN09C03-8-36-22R 10139243 UNF8-36 36.0 4.50X3.40 5 C
0.164 0.071 0.276 0.827 2.409 2.543 0.177 0.152
4,826 1,9 8,0 25 68,1 72,0 6,0 4,45
T33-FSN09C03-10-32-22R 10139244 UNF10-32 32.0 6.00X4.90 5 C
0.190 0.075 0.315 0.984 2.681 2.835 0.236 0.175
5,486 1,9 10,0 30 78,1 82,4 6,0 5,1
T33-FSN09C03-12-28-22R 10139245 UNF12-28 28.0 6.00X4.90 5 C
0.216 0.075 0.394 1.181 3.075 3.244 0.236 0.201
6,35 2,23 10,0 30 77,77 82,4 7,0 5,95
T33-FSN09C03-1/4-28-22R 10139246 UNF1/4-28 28.0 7.00X5.50 5 C
0.250 0.088 0.394 1.181 3.062 3.244 0.276 0.234
7,937 2,6 13,0 35 87,4 93,3 8,0 7,45
Thread milling
T33-FSN09C03-5/16-24-22R 10139247 UNF5/16-24 24.0 8.00X6.20 5 C
0.312 0.102 0.512 1.378 3.441 3.673 0.315 0.293
9,525 3,5 15,0 35 86,5 90,0 10,0 9,05
T33-FSN09C03-3/8-24-22R 10139248 UNF3/8-24 24.0 10.00X8.00 5 C
0.375 0.138 0.591 1.378 3.406 3.543 0.394 0.356
Thread tapping
Annex
393
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – UNF threads
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
11,112 3,8 15,0 76 96,2 100,0 8,0 10,55
T33-FSN09C05-7/16-20-22R 10139249 UNF7/16-20 20.0 8.00X6.20 5 C
0.437 0.150 0.591 2.992 3.787 3.937 0.315 0.415
Mini-Shaft™
12,7 3,8 15,0 83 106,2 110,0 9,0 12,15

T33-FSN09C05-1/2-20-22R 10139250 UNF1/2-20 20.0 9.00X7.00 5 C
0.500 0.150 0.591 3.268 4.181 4.331 0.354 0.478
15,875 4,7 15,0 68 105,3 110,0 12,0 15,25
T33-FSN09C05-5/8-18-22R 10139251 UNF5/8-18 18.0 12.00X9.00 6 C
0.625 0.185 0.591 2.677 4.146 4.331 0.472 0.600
Thread milling
Thread tapping
Annex
394
www.secotools.com
Thread tapping
T33-FSNC
Forming taps – Blind and through holes – G threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
TPI
9,728 2,6 10,0 67 87,4 90,0 7,0 9,25
T33-FSN21C09-1/8-28-12R 10139252 G1/8-28 28.0 7.00X5.50 5 C
0.383 0.102 0.394 2.638 3.441 3.543 0.276 0.364
Mini-Shaft™
13,157 3,7 14,0 71 96,3 100,0 11,0 12,55
T33-FSN21C09-1/4-19-12R 10139253 G1/4-19 19.0 11.00X9.00 6 C
0.518 0.146 0.551 2.795 3.791 3.937 0.433 0.494
16,662 3,85 15,0 71 96,15 100,0 11,0 16,05
T33-FSN21C09-3/8-19-12R 10139254 G3/8-19 19.0 11.00X9.00 7 C
0.656 0.152 0.591 2.795 3.785 3.937 0.433 0.632
20,955 5,1 17,0 80 119,9 125,0 16,0 20,1
T33-FSN21C09-1/2-14-12R 10139255 G1/2-14 14.0 16.00X12.00 7 C
0.825 0.201 0.669 3.150 4.720 4.921 0.630 0.791
22,911 5,1 20,0 78 119,9 125,0 18,0 22,05
T33-FSN21C09-5/8-14-12R 10139256 G5/8-14 14.0 18.00X14.50 7 C
0.902 0.201 0.787 3.071 4.720 4.921 0.709 0.868
26,441 5,1 22,0 73 134,9 140,0 20,0 25,6
T33-FSN21C09-3/4-14-12R 10139257 G3/4-14 14.0 20.00X16.00 7 C
1.041 0.201 0.866 2.874 5.311 5.512 0.787 1.008
Thread milling
Thread tapping
Annex
395
www.secotools.com
Thread tapping
T33-FSCC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Coating: TiN + TiCN
mm
1,2 10,0 18 54,8 57,2 3,5 2,8
T33-FSC01C03-3X0.5-65R 10139282 M3 0,5 3.50X2.70 3 C
0.047 0.394 0.709 2.157 2.252 0.138 0.110
Mini-Shaft™
1,6 7,0 21 61,4 64,6 4,5 3,7

T33-FSC01C03-4X0.7-65R 10139283 M4 0,7 4.50X3.40 5 C
0.063 0.276 0.827 2.417 2.543 0.177 0.146
2,1 8,0 25 67,9 72,0 6,0 4,65
T33-FSC01C03-5X0.8-65R 10139284 M5 0,8 6.00X4.90 5 C
0.083 0.315 0.984 2.673 2.835 0.236 0.183
2,3 10,0 30 77,7 82,4 6,0 5,6
T33-FSC01C03-6X1-65R 10139285 M6 1,0 6.00X4.90 5 C
0.091 0.394 1.181 3.059 3.244 0.236 0.220
3,1 13,0 35 86,9 93,3 8,0 7,45
T33-FSC01C03-8X1.25-65R 10139286 M8 1,25 8.00X6.20 5 C
0.122 0.512 1.378 3.421 3.673 0.315 0.293
3,5 15,0 39 96,5 101,8 10,0 9,35
T33-FSC01C03-10X1.5-65R 10139287 M10 1,5 10.00X8.00 5 C
0.138 0.591 1.535 3.799 4.008 0.394 0.368
Thread milling
Thread tapping
Annex
396
www.secotools.com
Thread tapping
T33-FSCE
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,2 10,0 18 54,8 56,0 3,5 2,8
T33-FSC01E03-3X0.5-65R 10139288 M3 0,5 3.50X2.70 3 E
0.047 0.394 0.709 2.157 2.205 0.138 0.110
Mini-Shaft™
1,6 7,0 21 61,4 63,0 4,5 3,7
T33-FSC01E03-4X0.7-65R 10139289 M4 0,7 4.50X3.40 5 E
0.063 0.276 0.827 2.417 2.480 0.177 0.146
1,5 8,0 25 68,5 70,0 6,0 4,65
T33-FSC01E03-5X0.8-65R 10139290 M5 0,8 6.00X4.90 5 E
0.059 0.315 0.984 2.697 2.756 0.236 0.183
Thread milling
Thread tapping
Annex
397
www.secotools.com
Thread tapping
T33A-FSCE
Forming taps – Blind holes – Metric coarse threads
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,7 8,0 25 68,3 70,0 6,0 4,65
T33A-FSC01E03-5X0.8-65R 10139294 M5 0,8 6.00X4.90 5 E
Mini-Shaft™
0.067 0.315 0.984 2.689 2.756 0.236 0.183

1,95 10,0 30 78,05 80,0 6,0 5,6
T33A-FSC01E03-6X1-65R 10139295 M6 1,0 6.00X4.90 5 E
0.077 0.394 1.181 3.073 3.150 0.236 0.220
2,55 13,0 35 87,45 90,0 8,0 7,45
T33A-FSC01E03-8X1.25-65R 10139296 M8 1,25 8.00X6.20 5 E
0.100 0.512 1.378 3.443 3.543 0.315 0.293
2,84 15,0 39 97,16 100,0 10,0 9,35
T33A-FSC01E03-10X1.5-65R 10139297 M10 1,5 10.00X8.00 5 E
0.112 0.591 1.535 3.825 3.937 0.394 0.368
Thread milling
Thread tapping
Annex
398
www.secotools.com
Thread tapping
T33B-FSCE
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,57 8,0 25 68,43 70,0 6,0 4,65
T33B-FSC01E03-5X0.8-65R 10139298 M5 0,8 6.00X4.90 5 E
Mini-Shaft™
0.062 0.315 0.984 2.694 2.756 0.236 0.183
1,95 10,0 30 78,05 80,0 6,0 5,6
T33B-FSC01E03-6X1-65R 10139299 M6 1,0 6.00X4.90 5 E
0.077 0.394 1.181 3.073 3.150 0.236 0.220
2,42 13,0 35 87,58 90,0 8,0 7,45
T33B-FSC01E03-8X1.25-65R 10139300 M8 1,25 8.00X6.20 5 E
0.095 0.512 1.378 3.448 3.543 0.315 0.293
2,84 15,0 39 97,16 100,0 10,0 9,35
T33B-FSC01E03-10X1.5-65R 10139301 M10 1,5 10.00X8.00 5 E
0.112 0.591 1.535 3.825 3.937 0.394 0.368
Thread milling
Thread tapping
Annex
399
www.secotools.com
Thread tapping
T33B-FSCC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
T33B-FSC01C06-12X1.75-65R 10208929 M12 1,75 3,9 18,0 83 105,1 110,0 9,0 9.00x7.00 11,25 5 C
Mini-Shaft™
T33B-FSC01C06-14X2-65R 10208930 M14 2,0 5,88 20,0 81 104,3 110,0 11,0 11.00x9.00 13,1 6 C
T33B-FSC01C06-16X2-65R 10208931 M16 2,0 5,88 20,0 68 104,3 110,0 12,0 12.00x9.00 15,1 6 C
T33B-FSC01C06-18X2.5-65R 10208932 M18 2,5 6,95 25,0 81 118,0 125,0 14,0 14.00x11.00 16,85 6 C
T33B-FSC01C06-20X2.5-65R 10208933 M20 2,5 6,62 25,0 95 133,0 140,0 16,0 16.00x12.00 18,85 6 C
T33B-FSC01C06-22X2.5-65R 10208934 M22 2,5 6,92 25,0 93 133,0 140,0 18,0 18.00x14.50 20,85 6 C
T33B-FSC01C06-24X3-65R 10208935 M24 3,0 8,44 30,0 113 151,3 160,0 18,0 18.00x14.50 22,65 6 C
Thread milling
Thread tapping
Annex
400
www.secotools.com
Thread tapping
T33-FSCC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
mm
1,4 7,0 21 61,6 64,6 4,5 3,8
T33-FSC02C03-4X0.5-65R 10139269 MF4X0.5 0,5 4.50X3.40 5 C
0.055 0.276 0.827 2.425 2.543 0.177 0.150
Mini-Shaft™
1,2 8,0 25 68,8 72,0 6,0 4,8
T33-FSC02C03-5X0.5-65R 10139270 MF5X0.5 0,5 6.00X4.90 5 C
0.047 0.315 0.984 2.709 2.835 0.236 0.189
1,35 10,0 30 78,65 82,4 6,0 5,8
T33-FSC02C03-6X0.5-65R 10139271 MF6X0.5 0,5 6.00X4.90 5 C
0.053 0.394 1.181 3.096 3.244 0.236 0.228
1,8 10,0 30 78,2 82,4 6,0 5,7
T33-FSC02C03-6X0.75-65R 10139272 MF6X0.75 0,75 6.00X4.90 5 C
0.071 0.394 1.181 3.079 3.244 0.236 0.224
2,25 13,0 35 87,75 93,3 8,0 7,6
T33-FSC02C03-8X1-65R 10139273 MF8X1.0 1,0 8.00X6.20 5 C
0.089 0.512 1.378 3.455 3.673 0.315 0.299
2,9 13,0 35 87,1 91,8 10,0 9,6
T33-FSC02C03-10X1-65R 10139274 MF10X1.0 1,0 10.00X8.00 5 C
0.114 0.512 1.378 3.429 3.614 0.394 0.378
4,0 15,0 39 96,0 101,8 10,0 9,45
Thread milling
T33-FSC02C03-10X1.25-65R 10139275 MF10X1.25 1,25 10.00X8.00 5 C
0.157 0.591 1.535 3.780 4.008 0.394 0.372
Thread tapping
Annex
401
www.secotools.com
Thread tapping
T33-FSCC
Thread turning
LF
TCL
DCONMS
TD CZCMS
THL
LU
OAL
MDT
• Substrate: HSSE
mm
3,27 10,0 73 96,73 100,0 9,0 11,6
T33-FSC02C05-12X1-65R 10139276 MF12X1.0 1,0 9.00X7.00 5 C
0.129 0.394 2.874 3.808 3.937 0.354 0.457
Mini-Shaft™
3,96 15,0 73 96,04 100,0 9,0 11,45

T33-FSC02C05-12X1.25-65R 10139277 MF12X1.25 1,25 9.00X7.00 5 C
0.156 0.591 2.874 3.781 3.937 0.354 0.451
4,2 15,0 73 95,8 100,0 9,0 11,35
T33-FSC02C05-12X1.5-65R 10139278 MF12X1.5 1,5 9.00X7.00 5 C
0.165 0.591 2.874 3.772 3.937 0.354 0.447
4,33 15,0 71 95,67 100,0 11,0 15,35
T33-FSC02C05-16X1.5-65R 10139279 MF16X1.5 1,5 11.00X9.00 5 C
0.170 0.591 2.795 3.767 3.937 0.433 0.604
4,4 17,0 66 105,6 110,0 14,0 17,35
T33-FSC02C05-18X1.5-65R 10139280 MF18X1.5 1,5 14.00X11.00 5 C
0.173 0.669 2.598 4.157 4.331 0.551 0.683
4,6 17,0 80 120,4 125,0 16,0 19,35
T33-FSC02C05-20X1.5-65R 10139281 MF20X1.5 1,5 16.00X12.00 5 C
0.181 0.669 3.150 4.740 4.921 0.630 0.762
Thread milling
Thread tapping
Annex
402
www.secotools.com
Thread tapping
T33B-FSCC
Thread turning
LF
TCL DCONMS
TD CZCMS
THL
LU
OAL
MDT
T33B-FSC02C05-12X1.25-65R 10208936 MF12X1.25 1,25 3,96 15,0 73 95,9 100,0 9,0 9.00x7.00 11,45 5 C
Mini-Shaft™
T33B-FSC02C05-14X1.5-65R 10208937 MF14X1.5 1,5 4,33 15,0 81 95,7 100,0 11,0 11.00x9.00 13,35 6 C
T33B-FSC02C05-16X1.5-65R 10208938 MF16X1.5 1,5 4,27 15,0 58 95,7 100,0 12,0 12.00x9.00 15,35 6 C
Thread milling
Thread tapping
Annex
403
www.secotools.com
Thread tapping
MTP-P001
Thread turning
MDT
• Substrate: HSS-E-PM
• Coating: TiAIN
Designation Item number TDZ Pitch DMM LU THLGTH LF PHDR CZC NOF BSG TCTR THCHT
mm mm mm mm mm
mm TPI
4,5 12,0 12,0 61,625 2,5
MTP-M3X0.50ISO6H-TB-P001 02999886 M3 0,5 – 4.50X3.40 3 SECO-DIN 6H B
0.177 0.472 0.472 2.426 0.098
6,0 13,0 13,0 68,075 3,4
0.236 0.512 0.512 2.680 0.134
Mini-Shaft™
6,0 15,0 15,0 76,3 4,3

0.236 0.591 0.591 3.004 0.169
8,0 18,0 18,0 85,375 5,1
0.315 0.709 0.709 3.361 0.201
10,0 20,0 20,0 94,21875 6,8
0.394 0.787 0.787 3.709 0.268
10,0 39,0 20,0 95,875 8,6
0.394 1.535 0.787 3.775 0.339
Thread milling
Thread tapping
Annex
404
www.secotools.com
Thread tapping
MTP-P002
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,1875 10,4
MTP-M12X1.75ISO6H-TB-P002 02999892 M12 1,75 – 9.00X7.00 4 DIN376 6H B
0.354 3.268 0.906 4.141 0.409
11,0 81,0 25,0 104,5 12,1
0.433 3.189 0.984 4.114 0.476
Mini-Shaft™
12,0 68,0 25,0 104,5 14,1
0.472 2.677 0.984 4.114 0.555
14,0 81,0 30,0 112,63 15,7
0.551 3.189 1.181 4.434 0.618
16,0 95,0 30,0 133,125 17,7
0.630 3.740 1.181 5.241 0.697
Thread milling
Thread tapping
Annex
405
www.secotools.com
Thread tapping
MTP-P003
Thread turning
MDT
• Coating: AlTiN-based
mm mm mm mm mm
mm TPI
2,5 20,0 5,0 38,87 0,75
MTP-M1X0.25ISO5HX-TB-P003 02999897 M1 0,25 – 2.50X2.10 2 DIN371 5HX B
0.098 0.787 0.197 1.530 0.030
2,5 20,0 5,0 38,87 0,95
MTP-M1.2X0.25ISO5HX-TB-P003 02999898 M1.2 0,25 – 2.50X2.10 2 DIN371 5HX B
0.098 0.787 0.197 1.530 0.037
Mini-Shaft™
2,5 20,0 6,5 38,65 1,1

0.098 0.787 0.256 1.522 0.043
2,5 12,5 7,0 38,42 1,3
0.098 0.492 0.276 1.513 0.051
2,5 20,0 7,0 38,42 1,5
0.098 0.787 0.276 1.513 0.059
2,8 9,0 6,0 43,2 1,6
0.110 0.354 0.236 1.701 0.063
2,8 12,0 7,0 42,97 1,8
0.110 0.472 0.276 1.692 0.071
Thread milling
2,8 12,0 7,0 43,2 1,9

0.110 0.472 0.276 1.701 0.075
2,8 12,5 8,0 47,97 2,1
0.110 0.492 0.315 1.889 0.083
2,8 12,5 8,0 47,97 2,15
0.110 0.492 0.315 1.889 0.085
3,5 18,0 8,9 53,6875 2,5
0.138 0.709 0.350 2.114 0.098
4,0 20,0 10,8 53,225 2,9
0.157 0.787 0.425 2.095 0.114
4,5 21,0 11,7 59,7625 3,4
Thread tapping
0.177 0.827 0.461 2.353 0.134

6,0 25,0 12,6 66,3 4,3
0.236 0.984 0.496 2.610 0.169
6,0 30,0 14,5 75,375 5,1
0.236 1.181 0.571 2.968 0.201
7,0 30,0 14,5 78,275 6,1
0.276 1.181 0.571 3.082 0.240
8,0 35,0 17,4 84,21875 6,8
0.315 1.378 0.685 3.316 0.268
10,0 39,0 19,2 93,0625 8,6
0.394 1.535 0.756 3.664 0.339
Annex
406
www.secotools.com
Thread tapping
MTP-P003-A
Thread turning
MDT
mm mm mm mm mm
mm TPI
4,5 21,0 11,7 59,73 3,4
MTP-M4X0.70ISO6HX-TB-P003-A 02999929 M4 0,7 – 4.50X3.40 3 DIN371 6HX B
0.177 0.827 0.461 2.352 0.134
6,0 25,0 12,6 66,35 4,3
Mini-Shaft™
0.236 0.984 0.496 2.612 0.169
6,0 30,0 14,5 75,51 5,1
0.236 1.181 0.571 2.973 0.201
7,0 30,0 14,5 75,51 6,1
0.276 1.181 0.571 2.973 0.240
8,0 35,0 17,4 84,48 6,8
0.315 1.378 0.685 3.326 0.268
10,0 39,0 19,2 93,46 8,6
0.394 1.535 0.756 3.680 0.339
Thread milling
Thread tapping
Annex
407
www.secotools.com
Thread tapping
MTP-P004
Thread turning
MDT
mm mm mm mm mm
mm TPI
2,8 43,0 12,0 59,7625 3,4
0.110 1.693 0.472 2.353 0.134
3,5 49,0 13,2 66,3 4,3
0.138 1.929 0.520 2.610 0.169
Mini-Shaft™
4,5 59,0 15,1 75,375 5,1

0.177 2.323 0.594 2.968 0.201
6,0 67,0 18,0 84,21875 6,8
0.236 2.638 0.709 3.316 0.268
7,0 77,0 19,8 93,0625 8,6
0.276 3.031 0.780 3.664 0.339
9,0 83,0 23,0 101,90625 10,4
0.354 3.268 0.906 4.012 0.409
11,0 81,0 25,0 100,75 12,1
0.433 3.189 0.984 3.967 0.476
Thread milling
12,0 68,0 25,0 100,75 14,1

0.472 2.677 0.984 3.967 0.555
14,0 81,0 30,0 114,46 15,7
0.551 3.189 1.181 4.506 0.618
16,0 95,0 30,0 128,4375 17,7
0.630 3.740 1.181 5.057 0.697
18,0 93,0 34,0 129,36 19,7
0.709 3.661 1.339 5.093 0.776
18,0 113,0 38,0 146,125 21,0
0.709 4.449 1.496 5.753 0.827
20,0 97,0 38,0 147,37 24,0
Thread tapping
0.787 3.819 1.496 5.802 0.945

22,0 115,0 45,0 165,42 26,5
0.866 4.528 1.772 6.513 1.043
Annex
408
www.secotools.com
Thread tapping
MTP-P004-A
Thread turning
MDT
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 101,90625 10,4
0.354 3.268 0.906 4.012 0.409
11,0 81,0 25,0 101,41 12,1
Mini-Shaft™
0.433 3.189 0.984 3.993 0.476
12,0 68,0 25,0 100,75 14,1
0.472 2.677 0.984 3.967 0.555
14,0 81,0 30,0 114,46 15,7
0.551 3.189 1.181 4.506 0.618
16,0 95,0 30,0 129,46 17,7
0.630 3.740 1.181 5.097 0.697
18,0 93,0 34,0 129,36 19,7
0.709 3.661 1.339 5.093 0.776
18,0 113,0 38,0 146,125 21,0
0.709 4.449 1.496 5.753 0.827
Thread milling
20,0 97,0 38,0 147,37 24,0
0.787 3.819 1.496 5.802 0.945
22,0 115,0 45,0 165,42 26,5
0.866 4.528 1.772 6.513 1.043
Thread tapping
Annex
409
www.secotools.com
Thread tapping
MTP-P011
Thread turning
MDT
mm mm mm mm mm
mm TPI
2,8 43,0 12,0 60,6875 3,5
MTP-M4X0.50ISO6HX-TB-P011 02999944 MF4X0.5 0,5 – 2.80X2.10 3 DIN374 6HX B
0.110 1.693 0.472 2.389 0.138
3,5 49,0 13,0 67,57 4,5
0.138 1.929 0.512 2.660 0.177
Mini-Shaft™
4,5 59,0 15,0 76,5 5,3

0.177 2.323 0.591 3.012 0.209
6,0 57,0 15,0 76,43 7,3
0.236 2.244 0.591 3.009 0.287
6,0 67,0 18,0 85,375 7,1
0.236 2.638 0.709 3.361 0.280
7,0 67,0 17,6 86,42 9,3
0.276 2.638 0.693 3.402 0.366
7,0 67,0 17,6 85,375 9,1
0.276 2.638 0.693 3.361 0.358
Thread milling
7,0 77,0 19,8 98,51875 8,8

0.276 3.031 0.780 3.879 0.346
9,0 73,0 21,0 95,36 11,1
0.354 2.874 0.827 3.754 0.437
9,0 73,0 21,0 94,21875 10,8
0.354 2.874 0.827 3.709 0.425
9,0 73,0 21,0 93,37 10,6
0.354 2.874 0.827 3.676 0.417
11,0 71,0 21,0 95,35 13,1
0.433 2.795 0.827 3.754 0.516
11,0 71,0 21,0 94,33 12,8
Thread tapping
0.433 2.795 0.827 3.714 0.504

11,0 71,0 21,0 93,0625 12,6
0.433 2.795 0.827 3.664 0.496
12,0 58,0 21,0 95,35 15,1
0.472 2.283 0.827 3.754 0.594
12,0 58,0 21,0 93,0625 14,6
0.472 2.283 0.827 3.664 0.575
14,0 66,0 24,0 105,35 17,1
0.551 2.598 0.945 4.148 0.673
14,0 66,0 24,0 103,35 16,6
0.551 2.598 0.945 4.069 0.654
16,0 80,0 24,0 120,24 19,1
0.630 3.150 0.945 4.734 0.752
Annex
16,0 80,0 24,0 118,25 18,6

0.630 3.150 0.945 4.656 0.732
18,0 78,0 25,0 118,25 20,5
0.709 3.071 0.984 4.656 0.807
18,0 93,0 28,0 133,23 22,5
0.709 3.661 1.102 5.245 0.886
410
www.secotools.com
Thread tapping
mm mm mm mm mm
mm TPI
Thread turning
18,0 93,0 28,0 131,28 22,0
0.709 3.661 1.102 5.169 0.866
18,0 93,0 28,0 133,23 23,5
0.709 3.661 1.102 5.245 0.925
18,0 93,0 28,0 133,23 24,5
0.709 3.661 1.102 5.245 0.965
20,0 77,0 28,0 133,22 25,5
0.787 3.031 1.102 5.245 1.004
20,0 77,0 28,0 131,28 25,0
0.787 3.031 1.102 5.169 0.984
20,0 77,0 28,0 133,22 26,5
0.787 3.031 1.102 5.245 1.043
MDT
22,0 85,0 28,0 143,22 28,5
0.866 3.346 1.102 5.639 1.122
22,0 85,0 28,0 141,27 28,0
0.866 3.346 1.102 5.562 1.102
Mini-Shaft™
Thread milling
Thread tapping
Annex
411
www.secotools.com
Thread tapping
MTP-M003-A
Thread turning
MDT
• Substrate: HSS-E
• Coating: TiCN
mm mm mm mm mm
mm TPI
4,5 21,0 11,7 59,82 3,4
MTP-M4X0.70ISO6H-TB-M003-A 03000094 M4 0,7 – 4.50X3.40 3 DIN371 6H B
0.177 0.827 0.461 2.355 0.134
6,0 25,0 12,6 66,4 4,3
Mini-Shaft™

0.236 0.984 0.496 2.614 0.169
6,0 30,0 14,5 75,375 5,1
0.236 1.181 0.571 2.968 0.201
8,0 35,0 17,4 84,21875 6,8
0.315 1.378 0.685 3.316 0.268
10,0 39,0 19,2 93,0625 8,6
0.394 1.535 0.756 3.664 0.339
Thread milling
Thread tapping
Annex
412
www.secotools.com
Thread tapping
MTP-M004
Thread turning
MDT
• Coating: TiCN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 101,90625 10,4
MTP-M12X1.75ISO6H-TB-M004 03000087 M12 1,75 – 9.00X7.00 4 DIN376 6H B
0.354 3.268 0.906 4.012 0.409
11,0 81,0 25,0 100,75 12,1
Mini-Shaft™
0.433 3.189 0.984 3.967 0.476
12,0 68,0 25,0 100,75 14,1
0.472 2.677 0.984 3.967 0.555
14,0 81,0 30,0 113,4375 15,7
0.551 3.189 1.181 4.466 0.618
16,0 95,0 30,0 128,4375 17,7
0.630 3.740 1.181 5.057 0.697
Thread milling
Thread tapping
Annex
413
www.secotools.com
Thread tapping
MTP-M004-A
Thread turning
MDT
• Coating: TiCN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 101,90625 10,4
0.354 3.268 0.906 4.012 0.409
11,0 81,0 25,0 101,14 12,1
Mini-Shaft™

0.433 3.189 0.984 3.982 0.476
12,0 68,0 25,0 101,05 14,1
0.472 2.677 0.984 3.978 0.555
14,0 81,0 30,0 114,15 15,7
0.551 3.189 1.181 4.494 0.618
16,0 95,0 30,0 129,15 17,7
0.630 3.740 1.181 5.085 0.697
18,0 93,0 34,0 129,53 19,7
0.709 3.661 1.339 5.100 0.776
18,0 113,0 38,0 147,58 21,0
0.709 4.449 1.496 5.810 0.827
Thread milling
Thread tapping
Annex
414
www.secotools.com
Thread tapping
MTP-N001
Thread turning
MDT
• Coating: BRIGHT
mm mm mm mm mm
mm TPI
3,5 16,0 9,0 54,625 2,5
MTP-M3X0.50ISO6H-TB-N001 03000136 M3 0,5 – 3.50X2.70 2 DIN371 6H B
0.138 0.630 0.354 2.151 0.098
4,5 19,0 12,0 59,85 3,4
0.177 0.748 0.472 2.356 0.134
Mini-Shaft™
6,0 23,0 13,0 66,4 4,3
0.236 0.906 0.512 2.614 0.169
6,0 27,0 15,0 75,375 5,1
0.236 1.063 0.591 2.968 0.201
8,0 28,0 18,0 84,21875 6,8
0.315 1.102 0.709 3.316 0.268
10,0 30,0 20,0 93,25 8,6
0.394 1.181 0.787 3.671 0.339
Thread milling
Thread tapping
Annex
415
www.secotools.com
Thread tapping
MTP-N001-A
Thread turning
MDT
• Coating: BRIGHT
mm mm mm mm mm
mm TPI
4,5 19,0 12,0 59,85 3,4
MTP-M4X0.70ISO6H-TB-N001-A 03000145 M4 0,7 – 4.50X3.40 2 DIN371 6H B
0.177 0.748 0.472 2.356 0.134
6,0 23,0 13,0 66,4 4,3
Mini-Shaft™

0.236 0.906 0.512 2.614 0.169
6,0 27,0 15,0 75,5 5,1
0.236 1.063 0.591 2.972 0.201
8,0 28,0 18,0 84,37 6,8
0.315 1.102 0.709 3.322 0.268
10,0 30,0 20,0 93,25 8,6
0.394 1.181 0.787 3.671 0.339
Thread milling
Thread tapping
Annex
416
www.secotools.com
Thread tapping
MTP-N002
Thread turning
MDT
• Coating: BRIGHT
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 102,1 10,4
0.354 3.268 0.906 4.020 0.409
11,0 81,0 25,0 101,0 12,1
0.433 3.189 0.984 3.976 0.476
Mini-Shaft™
12,0 68,0 25,0 101,0 14,1
0.472 2.677 0.984 3.976 0.555
Thread milling
Thread tapping
Annex
417
www.secotools.com
Thread tapping
MTP-N002-A
Thread turning
MDT
• Coating: BRIGHT
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 102,1 10,4
0.354 3.268 0.906 4.020 0.409
11,0 81,0 25,0 101,0 12,1
Mini-Shaft™

0.433 3.189 0.984 3.976 0.476
12,0 68,0 25,0 101,0 14,1
0.472 2.677 0.984 3.976 0.555
Thread milling
Thread tapping
Annex
418
www.secotools.com
Thread tapping
MTP-S001
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
2,8 8,0 8,0 43,2 1,6
MTP-M2X0.40ISO6HX-TB-S001 10001159 M2 0,4 – 2.80X2.10 2 DIN371 6HX B
0.110 0.315 0.315 1.701 0.063
2,8 9,0 9,0 47,97 2,1
MTP-M2.5X0.45ISO6HX-TB-S001 10001161 M2.5 0,45 – 2.80X2.10 2 DIN371 6HX B
0.110 0.354 0.354 1.889 0.083
Mini-Shaft™
3,5 10,0 10,0 53,75 2,5
0.138 0.394 0.394 2.116 0.098
4,0 12,0 12,0 53,3 2,9
MTP-M3.5X0.60ISO6HX-TB-S001 10001163 M3.5 0,6 – 4.00X3.00 3 DIN371 6HX B
0.157 0.472 0.472 2.098 0.114
4,5 13,0 13,0 59,85 3,4
0.177 0.512 0.512 2.356 0.134
6,0 16,0 16,0 66,4 4,3
0.236 0.630 0.630 2.614 0.169
6,0 23,0 15,0 75,5 5,1
0.236 0.906 0.591 2.972 0.201
Thread milling
8,0 29,5 18,0 84,37 6,8
0.315 1.161 0.709 3.322 0.268
10,0 33,5 20,0 93,25 8,6
0.394 1.319 0.787 3.671 0.339
Thread tapping
Annex
419
www.secotools.com
Thread tapping
MTP-S002
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 102,12 10,4
0.354 3.268 0.906 4.020 0.409
12,0 68,0 25,0 101,0 14,1
0.472 2.677 0.984 3.976 0.555
Mini-Shaft™
16,0 95,0 30,0 128,75 17,7

0.630 3.740 1.181 5.069 0.697
Thread milling
Thread tapping
Annex
420
www.secotools.com
Thread tapping
MTP-S011
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
6,0 23,0 15,0 76,62 5,25
MTP-M6X0.75ISO6HX-TB-S011 10001176 MF6X0.75 0,75 – 6.00X4.90 3 DIN371 6HX B
0.236 0.906 0.591 3.017 0.207
8,0 29,5 18,0 86,62 7,25
0.315 1.161 0.709 3.410 0.285
Mini-Shaft™
8,0 29,5 18,0 85,5 7,0
0.315 1.161 0.709 3.366 0.276
10,0 33,5 20,0 95,5 9,0
0.394 1.319 0.787 3.760 0.354
9,0 73,0 21,0 95,5 11,0
0.354 2.874 0.827 3.760 0.433
9,0 73,0 21,0 93,25 10,5
0.354 2.874 0.827 3.671 0.413
11,0 71,0 21,0 93,25 12,5
0.433 2.795 0.827 3.671 0.492
Thread milling
Thread tapping
Annex
421
www.secotools.com
Thread tapping
MTP-S012
Through holes – MJ threads
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
4,5 13,0 13,0 59,85 3,4
MTP-MJ4X0.70ISO4H-TB-S012 10001172 MJ4X0.7 0,7 – 4.50X3.40 3 DIN371 4H B
0.177 0.512 0.512 2.356 0.134
6,0 16,0 16,0 66,4 4,3
0.236 0.630 0.630 2.614 0.169
Mini-Shaft™
6,0 23,0 15,0 75,5 5,1

MTP-MJ6X1.00ISO4H-TB-S012 10001174 MJ6X1 1,0 – 6.00X4.90 3 DIN371 4H B
0.236 0.906 0.591 2.972 0.201
8,0 29,5 18,0 84,37 6,9
0.315 1.161 0.709 3.322 0.272
Thread milling
Thread tapping
Annex
422
www.secotools.com
Thread tapping
MTP-S013
Thread turning
MDT
mm mm mm mm mm
mm TPI
inch inch inch inch inch
MTP-EGM4X0.7ISO4H-TB-S013 6,0 16 16,0 66,9 4,2
10001218 EGM4 0,7 – 6.00X4.90 3 DIN40435 4H B
MTP-STIM4X0.7ISO4H-TB-S013 0.236 0.630 0.630 2.632 0.165
MTP-EGM5X0.8ISO4H-TB-S013 6,0 23 15,0 76,4 5,3
10001219 EGM5 0,8 – 6.00X4.90 3 DIN40435 4H B
Mini-Shaft™
MTP-EGM6X1.0ISO4H-TB-S013 8,0 35 18,0 85,5 6,3
10001220 EGM6 1,0 – 8.00X6.20 3 DIN40435 4H B
MTP-EGM8X1.25ISO4H-TB-S013 10,0 34 20,0 94,4 8,4
10001221 EGM8 1,25 – 10.00X8.00 3 DIN40435 4H B
Thread milling
Thread tapping
Annex
423
www.secotools.com
Thread tapping
MTP-S042
Through holes – UNJF threads
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
6,0 16,0 16,0 66,43 4,15 DIN2184-
MTP-10-32UNJF3B-TB-S042 10001183 UNJF10-32 – 32.0 6.00X4.90 3 3B B
0.236 0.630 0.630 2.615 0.163 1
7,0 25,0 15,0 75,92 5,6 DIN2184-
MTP-1/4-28UNJF3B-TB-S042 10001184 UNJF1/4-28 – 28.0 7.00X5.50 3 3B B
0.276 0.984 0.591 2.989 0.220 1
Mini-Shaft™
8,0 29,5 18,0 85,24 7,0 DIN2184-

0.315 1.161 0.709 3.356 0.276 1
10,0 33,5 20,0 95,24 8,6 DIN2184-
0.394 1.319 0.787 3.750 0.339 1
Thread milling
Thread tapping
Annex
424
www.secotools.com
Thread tapping
MTP-S043
Thread turning
MDT
mm mm mm mm mm
mm TPI
6,0 23,0 15,0 76,43 5,1
MTP-10-32EGUNF3B-TB-S043 10001214 EGUNF10-32 – 32.0 6.00X4.90 3 DIN2184-1 3B B
0.236 0.906 0.591 3.009 0.201
8,0 29,5 18,0 85,92 6,6
MTP-1/4-28EGUNF3B-TB-S043 10001215 EGUNF1/4-28 – 28.0 8.00X6.20 3 DIN2184-1 3B B
0.315 1.161 0.709 3.383 0.260
Mini-Shaft™
10,0 33,5 20,0 95,24 8,2
0.394 1.319 0.787 3.750 0.323
8,0 76,0 20,0 95,24 9,8
0.315 2.992 0.787 3.750 0.386
Thread milling
Thread tapping
Annex
425
www.secotools.com
Thread tapping
MTH-P001
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
4,5 12,0 12,0 61,625 2,5
MTH-M3X0.50ISO6H-BC-P001 02999974 M3 0,5 – 4.50X3.40 3 SECO-DIN 6H C
0.177 0.472 0.472 2.426 0.098
6,0 13,0 13,0 67,97 3,4
0.236 0.512 0.512 2.676 0.134
Mini-Shaft™
6,0 15,0 15,0 77,67 4,3

0.236 0.591 0.591 3.058 0.169
8,0 18,0 18,0 87,25 5,1
0.315 0.709 0.709 3.435 0.201
10,0 20,0 20,0 96,5625 6,8
0.394 0.787 0.787 3.802 0.268
10,0 39,0 20,0 95,875 8,6
0.394 1.535 0.787 3.775 0.339
Thread milling
Thread tapping
Annex
426
www.secotools.com
Thread tapping
MTH-P001-A
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
6,0 13,0 13,0 67,97 3,4
MTH-M4X0.70ISO6H-BC-P001-A 02999985 M4 0,7 – 6.00X4.90 3 SECO-DIN 6H C
0.236 0.512 0.512 2.676 0.134
6,0 15,0 15,0 77,67 4,3
Mini-Shaft™
0.236 0.591 0.591 3.058 0.169
8,0 18,0 18,0 87,07 5,1
0.315 0.709 0.709 3.428 0.201
10,0 20,0 20,0 96,32 6,8
0.394 0.787 0.787 3.792 0.268
10,0 39,0 20,0 95,57 8,6
0.394 1.535 0.787 3.763 0.339
Thread milling
Thread tapping
Annex
427
www.secotools.com
Thread tapping
MTH-P002
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,1875 10,4
MTH-M12X1.75ISO6H-BC-P002 02999980 M12 1,75 – 9.00X7.00 4 DIN376 6H C
0.354 3.268 0.906 4.141 0.409
11,0 81,0 25,0 104,5 12,1
0.433 3.189 0.984 4.114 0.476
Mini-Shaft™
12,0 68,0 25,0 104,5 14,1

0.472 2.677 0.984 4.114 0.555
14,0 81,0 30,0 118,125 15,7
0.551 3.189 1.181 4.651 0.618
16,0 95,0 30,0 133,125 17,7
0.630 3.740 1.181 5.241 0.697
Thread milling
Thread tapping
Annex
428
www.secotools.com
Thread tapping
MTH-P002-A
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 104,38 10,4
MTH-M12X1.75ISO6H-BC-P002-A 02999990 M12 1,75 – 9.00X7.00 4 DIN376 6H C
0.354 3.268 0.906 4.109 0.409
11,0 81,0 25,0 103,74 12,1
Mini-Shaft™
0.433 3.189 0.984 4.084 0.476
12,0 68,0 25,0 103,74 14,1
0.472 2.677 0.984 4.084 0.555
14,0 81,0 30,0 117,05 15,7
0.551 3.189 1.181 4.608 0.618
16,0 95,0 30,0 132,05 17,7
0.630 3.740 1.181 5.199 0.697
Thread milling
Thread tapping
Annex
429
www.secotools.com
Thread tapping
MTH-P003
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
2,5 6,0 4,0 39,3 1,3
MTH-M1.6X0.35ISO6HX-BC-P003 02999995 M1.6 0,35 – 2.50X2.10 2 DIN371 6HX C
0.098 0.236 0.157 1.547 0.051
2,8 9,0 4,0 44,2 1,6
Mini-Shaft™
MTH-M2X0.40ISO6HX-BC-P003 02999996 M2 0,4 – 2.80X2.10 2 DIN371 6HX C

0.110 0.354 0.157 1.740 0.063
2,8 12,0 4,0 44,1 1,8
0.110 0.472 0.157 1.736 0.071
2,8 12,0 4,0 44,2 1,9
0.110 0.472 0.157 1.740 0.075
2,8 12,5 4,0 49,1 2,1
0.110 0.492 0.157 1.933 0.083
2,8 12,5 4,0 49,1 2,15
0.110 0.492 0.157 1.933 0.085
3,5 18,0 5,9 54,625 2,5
0.138 0.709 0.232 2.151 0.098
Thread milling
4,0 20,0 7,0 54,35 2,9

0.157 0.787 0.276 2.140 0.114
4,5 21,0 6,7 61,075 3,4
0.177 0.827 0.264 2.405 0.134
6,0 25,0 7,7 67,8 4,3
0.236 0.984 0.303 2.669 0.169
6,0 30,0 10,0 77,25 5,1
0.236 1.181 0.394 3.041 0.201
7,0 30,0 10,0 77,25 6,1
0.276 1.181 0.394 3.041 0.240
Thread tapping
8,0 35,0 11,6 86,5625 6,8

0.315 1.378 0.457 3.408 0.268
10,0 39,0 15,1 95,875 8,6
0.394 1.535 0.594 3.775 0.339
Annex
430
www.secotools.com
Thread tapping
MTH-P003-A
Thread turning
MDT
mm mm mm mm mm
mm TPI
4,5 21,0 6,7 61,075 3,4
MTH-M4X0.70ISO6HX-BC-P003-A 03000024 M4 0,7 – 4.50X3.40 3 DIN371 6HX C
0.177 0.827 0.264 2.405 0.134
6,0 25,0 7,7 68,1 4,3
Mini-Shaft™
0.236 0.984 0.303 2.681 0.169
6,0 30,0 10,0 77,39 5,1
0.236 1.181 0.394 3.047 0.201
7,0 30,0 10,0 77,25 6,1
0.276 1.181 0.394 3.041 0.240
8,0 35,0 11,6 86,5625 6,8
0.315 1.378 0.457 3.408 0.268
10,0 39,0 15,1 95,875 8,6
0.394 1.535 0.594 3.775 0.339
Thread milling
Thread tapping
Annex
431
www.secotools.com
Thread tapping
MTH-P004
Thread turning
MDT
mm mm mm mm mm
mm TPI
3,5 49,0 8,0 67,8 4,3
0.138 1.929 0.315 2.669 0.169
4,5 59,0 10,0 77,25 5,1
0.177 2.323 0.394 3.041 0.201
Mini-Shaft™
5,5 59,0 10,0 77,25 6,1

0.217 2.323 0.394 3.041 0.240
6,0 67,0 13,0 86,5625 6,8
0.236 2.638 0.512 3.408 0.268
7,0 77,0 20,0 95,875 8,6
0.276 3.031 0.787 3.775 0.339
9,0 83,0 16,0 105,59 10,4
0.354 3.268 0.630 4.157 0.409
11,0 81,0 25,0 104,5 12,1
0.433 3.189 0.984 4.114 0.476
Thread milling
12,0 68,0 20,0 104,5 14,1

0.472 2.677 0.787 4.114 0.555
14,0 81,0 25,0 118,75 15,7
0.551 3.189 0.984 4.675 0.618
16,0 95,0 25,0 133,75 17,7
0.630 3.740 0.984 5.266 0.697
18,0 93,0 25,0 133,73 19,7
0.709 3.661 0.984 5.265 0.776
18,0 113,0 30,0 152,72 21,0
0.709 4.449 1.181 6.013 0.827
20,0 97,0 30,0 152,76 24,0
Thread tapping
0.787 3.819 1.181 6.014 0.945

22,0 115,0 36,0 171,78 26,5
0.866 4.528 1.417 6.763 1.043
Annex
432
www.secotools.com
Thread tapping
MTH-P004-A
Thread turning
MDT
mm mm mm mm mm
mm TPI
9,0 83,0 16,0 105,59 10,4
0.354 3.268 0.630 4.157 0.409
11,0 81,0 25,0 105,08 12,1
Mini-Shaft™
0.433 3.189 0.984 4.137 0.476
12,0 68,0 20,0 104,5 14,1
0.472 2.677 0.787 4.114 0.555
14,0 81,0 25,0 118,75 15,7
0.551 3.189 0.984 4.675 0.618
16,0 95,0 25,0 133,75 17,7
0.630 3.740 0.984 5.266 0.697
18,0 93,0 25,0 133,73 19,7
0.709 3.661 0.984 5.265 0.776
18,0 113,0 30,0 152,72 21,0
0.709 4.449 1.181 6.013 0.827
Thread milling
20,0 97,0 30,0 151,75 24,0
0.787 3.819 1.181 5.974 0.945
22,0 115,0 36,0 171,78 26,5
0.866 4.528 1.417 6.763 1.043
Thread tapping
Annex
433
www.secotools.com
Thread tapping
MTH-P011
Thread turning
MDT
mm mm mm mm mm
mm TPI
2,8 43,0 7,0 61,625 3,5
MTH-M4X0.50ISO6HX-BC-P011 03000040 MF4X0.5 0,5 – 2.80X2.10 3 DIN374 6HX C
0.110 1.693 0.276 2.426 0.138
3,5 49,0 8,0 68,75 4,5
0.138 1.929 0.315 2.707 0.177
Mini-Shaft™
4,5 59,0 10,0 77,7 5,3

0.177 2.323 0.394 3.059 0.209
6,0 57,0 13,0 77,72 7,3
0.236 2.244 0.512 3.060 0.287
6,0 67,0 13,0 87,2 7,1
0.236 2.638 0.512 3.433 0.280
7,0 67,0 13,0 87,73 9,3
0.276 2.638 0.512 3.454 0.366
7,0 67,0 13,0 87,25 9,1
0.276 2.638 0.512 3.435 0.358
Thread milling
7,0 77,0 15,0 96,5625 8,8

0.276 3.031 0.591 3.802 0.346
9,0 73,0 15,0 97,25 11,1
0.354 2.874 0.591 3.829 0.437
9,0 73,0 15,0 96,5625 10,8
0.354 2.874 0.591 3.802 0.425
9,0 73,0 15,0 96,07 10,6
0.354 2.874 0.591 3.782 0.417
11,0 71,0 15,0 97,11 13,1
0.433 2.795 0.591 3.823 0.516
11,0 71,0 15,0 96,5625 12,8
Thread tapping
0.433 2.795 0.591 3.802 0.504

11,0 71,0 15,0 95,875 12,6
0.433 2.795 0.591 3.775 0.496
12,0 58,0 15,0 97,25 15,1
0.472 2.283 0.591 3.829 0.594
12,0 58,0 15,0 95,875 14,6
0.472 2.283 0.591 3.775 0.575
14,0 66,0 17,0 105,875 17,1
0.551 2.598 0.669 4.168 0.673
14,0 66,0 17,0 105,71 16,6
0.551 2.598 0.669 4.162 0.654
16,0 80,0 17,0 122,25 19,1
0.630 3.150 0.669 4.813 0.752
Annex
16,0 80,0 17,0 120,875 18,6

0.630 3.150 0.669 4.759 0.732
18,0 78,0 17,0 120,875 20,5
0.709 3.071 0.669 4.759 0.807
18,0 93,0 20,0 135,875 22,5
0.709 3.661 0.787 5.349 0.886
434
www.secotools.com
Thread tapping
mm mm mm mm mm
mm TPI
Thread turning
18,0 93,0 20,0 134,7 22,0
0.709 3.661 0.787 5.303 0.866
18,0 93,0 20,0 135,7 23,5
0.709 3.661 0.787 5.343 0.925
18,0 93,0 20,0 135,7 24,5
0.709 3.661 0.787 5.343 0.965
20,0 77,0 20,0 135,875 25,5
0.787 3.031 0.787 5.349 1.004
20,0 77,0 20,0 134,73 25,0
0.787 3.031 0.787 5.304 0.984
20,0 77,0 20,0 135,72 26,5
0.787 3.031 0.787 5.343 1.043
MDT
22,0 85,0 20,0 150,0 28,5
0.866 3.346 0.787 5.906 1.122
22,0 85,0 20,0 144,73 28,0
0.866 3.346 0.787 5.698 1.102
Mini-Shaft™
Thread milling
Thread tapping
Annex
435
www.secotools.com
Thread tapping
MTH-M003
Thread turning
MDT
• Coating: TiCN
mm mm mm mm mm
mm TPI
2,5 6,0 4,0 39,21 1,3
MTH-M1.6X0.35ISO6H-BC-M003 03000106 M1.6 0,35 – 2.50X2.10 2 DIN371 6H C
0.098 0.236 0.157 1.544 0.051
2,8 9,0 4,0 44,2 1,6
MTH-M2X0.40ISO6H-BC-M003 03000107 M2 0,4 – 2.80X2.10 3 DIN371 6H C
0.110 0.354 0.157 1.740 0.063
Mini-Shaft™
2,8 12,0 4,0 44,41 1,8

0.110 0.472 0.157 1.748 0.071
2,8 12,0 4,0 44,4 1,9
0.110 0.472 0.157 1.748 0.075
2,8 12,5 4,0 49,32 2,1
0.110 0.492 0.157 1.942 0.083
2,8 12,5 4,0 49,32 2,15
0.110 0.492 0.157 1.942 0.085
3,5 18,0 5,9 54,625 2,5
0.138 0.709 0.232 2.151 0.098
Thread milling
4,0 20,0 7,0 54,35 2,9

0.157 0.787 0.276 2.140 0.114
4,5 21,0 6,7 61,075 3,4
0.177 0.827 0.264 2.405 0.134
6,0 25,0 7,7 67,8 4,3
0.236 0.984 0.303 2.669 0.169
6,0 30,0 10,0 77,25 5,1
0.236 1.181 0.394 3.041 0.201
7,0 30,0 10,0 77,25 6,1
0.276 1.181 0.394 3.041 0.240
8,0 35,0 11,6 86,5625 6,8
Thread tapping
0.315 1.378 0.457 3.408 0.268

10,0 39,0 15,1 95,875 8,6
0.394 1.535 0.594 3.775 0.339
Annex
436
www.secotools.com
Thread tapping
MTH-M003-A
Thread turning
MDT
• Coating: TiCN
mm mm mm mm mm
mm TPI
4,5 21,0 6,7 61,075 3,4
MTH-M4X0.70ISO6H-BC-M003-A 03000125 M4 0,7 – 4.50X3.40 3 DIN371 6H C
0.177 0.827 0.264 2.405 0.134
6,0 25,0 7,7 67,8 4,3
Mini-Shaft™
0.236 0.984 0.303 2.669 0.169
6,0 30,0 10,0 77,25 5,1
0.236 1.181 0.394 3.041 0.201
7,0 30,0 10,0 77,57 6,1
0.276 1.181 0.394 3.054 0.240
8,0 35,0 11,6 86,5625 6,8
0.315 1.378 0.457 3.408 0.268
10,0 39,0 15,1 95,875 8,6
0.394 1.535 0.594 3.775 0.339
Thread milling
Thread tapping
Annex
437
www.secotools.com
Thread tapping
MTH-M004
Thread turning
MDT
• Coating: TiCN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,1875 10,4
0.354 3.268 0.906 4.141 0.409
11,0 81,0 25,0 104,5 12,1
0.433 3.189 0.984 4.114 0.476
Mini-Shaft™
12,0 68,0 20,0 104,5 14,1

0.472 2.677 0.787 4.114 0.555
14,0 81,0 25,0 118,125 15,7
0.551 3.189 0.984 4.651 0.618
16,0 95,0 25,0 133,125 17,7
0.630 3.740 0.984 5.241 0.697
Thread milling
Thread tapping
Annex
438
www.secotools.com
Thread tapping
MTH-M004-A
Thread turning
MDT
• Coating: TiCN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,1875 10,4
0.354 3.268 0.906 4.141 0.409
11,0 81,0 25,0 105,63 12,1
Mini-Shaft™
0.433 3.189 0.984 4.159 0.476
12,0 68,0 20,0 104,5 14,1
0.472 2.677 0.787 4.114 0.555
14,0 81,0 25,0 119,42 15,7
0.551 3.189 0.984 4.702 0.618
16,0 95,0 25,0 134,43 17,7
0.630 3.740 0.984 5.293 0.697
Thread milling
Thread tapping
Annex
439
www.secotools.com
Thread tapping
MTH-N001
Thread turning
MDT
• Coating: BRIGHT
mm mm mm mm mm
mm TPI
3,5 18,0 9,0 54,625 2,5
MTH-M3X0.50ISO6H-BC-N001 03000153 M3 0,5 – 3.50X2.70 3 DIN371 6H C
0.138 0.709 0.354 2.151 0.098
4,5 21,0 12,0 61,075 3,4
0.177 0.827 0.472 2.405 0.134
Mini-Shaft™
6,0 25,0 13,0 68,2 4,3

0.236 0.984 0.512 2.685 0.169
6,0 30,0 15,0 77,25 5,1
0.236 1.181 0.591 3.041 0.201
8,0 35,0 18,0 87,0 6,8
0.315 1.378 0.709 3.425 0.268
10,0 39,0 20,0 96,3 8,6
0.394 1.535 0.787 3.791 0.339
Thread milling
Thread tapping
Annex
440
www.secotools.com
Thread tapping
MTH-N002
Thread turning
MDT
• Coating: BRIGHT
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,25 10,4
0.354 3.268 0.906 4.144 0.409
11,0 81,0 25,0 104,6 12,1
0.433 3.189 0.984 4.118 0.476
Mini-Shaft™
12,0 68,0 25,0 104,5 14,1
0.472 2.677 0.984 4.114 0.555
Thread milling
Thread tapping
Annex
441
www.secotools.com
Thread tapping
MTH-S001
Thread turning
MDT
mm mm mm mm mm
mm TPI
3,5 8,0 8,0 54,75 2,5
MTH-M3X0.50ISO6HX-BC-S001 10001105 M3 0,5 – 3.50X2.70 3 DIN371 6HX C
0.138 0.315 0.315 2.156 0.098
4,5 10,5 10,5 61,25 3,4
0.177 0.413 0.413 2.411 0.134
Mini-Shaft™
6,0 13,0 13,0 68,0 4,3

0.236 0.512 0.512 2.677 0.169
6,0 16,0 16,0 77,5 5,1
0.236 0.630 0.630 3.051 0.201
8,0 20,5 20,5 86,87 6,8
0.315 0.807 0.807 3.420 0.268
10,0 25,5 25,5 96,25 8,6
0.394 1.004 1.004 3.789 0.339
Thread milling
Thread tapping
Annex
442
www.secotools.com
Thread tapping
MTH-S002
Thread turning
MDT
mm mm mm mm mm
mm TPI
12,0 30,5 30,5 105,09 10,4
0.472 1.201 1.201 4.137 0.409
16,0 39,5 39,5 104,4 14,1
0.630 1.555 1.555 4.110 0.555
Mini-Shaft™
Thread milling
Thread tapping
Annex
443
www.secotools.com
Thread tapping
MTH-S003
Thread turning
MDT
• Coating: TiN
mm mm mm mm mm
mm TPI
3,5 8,0 8,0 54,75 2,5
0.138 0.315 0.315 2.156 0.098
4,5 10,5 10,5 61,25 3,4
0.177 0.413 0.413 2.411 0.134
Mini-Shaft™
6,0 13,0 13,0 68,0 4,3

0.236 0.512 0.512 2.677 0.169
6,0 16,0 16,0 77,5 5,1
0.236 0.630 0.630 3.051 0.201
8,0 20,5 20,5 86,87 6,8
0.315 0.807 0.807 3.420 0.268
10,0 25,5 25,5 96,25 8,6
0.394 1.004 1.004 3.789 0.339
Thread milling
Thread tapping
Annex
444
www.secotools.com
Thread tapping
MTH-S004
Thread turning
MDT
• Coating: TiN
mm mm mm mm mm
mm TPI
12,0 30,5 30,5 105,09 10,4
0.472 1.201 1.201 4.137 0.409
16,0 39,5 39,5 104,4 14,1
0.630 1.555 1.555 4.110 0.555
Mini-Shaft™
Thread milling
Thread tapping
Annex
445
www.secotools.com
Thread tapping
MTH-S011
Thread turning
MDT
mm mm mm mm mm
mm TPI
8,0 20,0 20,0 87,5 7,0
MTH-M8X1.00ISO6HX-BC-S011 10001082 MF8X1.0 1,0 – 8.00X6.20 3 DIN371 6HX C
0.315 0.787 0.787 3.445 0.276
10,0 24,0 24,0 87,5 9,0
0.394 0.945 0.945 3.445 0.354
Mini-Shaft™
10,0 24,5 24,5 96,87 8,75

0.394 0.965 0.965 3.814 0.344
12,0 28,5 28,5 96,49 10,75
0.472 1.122 1.122 3.799 0.423
12,0 29,5 29,5 95,8 10,5
0.472 1.161 1.161 3.772 0.413
Thread milling
Thread tapping
Annex
446
www.secotools.com
Thread tapping
MTH-S012
Blind holes – MJ threads
Thread turning
MDT
mm mm mm mm mm
mm TPI
3,5 8,0 8,0 54,75 2,6
MTH-MJ3X0.50ISO4H-BC-S012 10001069 MJ3X0.5 0,5 – 3.50X2.70 3 DIN371 4H C
0.138 0.315 0.315 2.156 0.102
4,5 10,5 10,5 61,25 3,4
0.177 0.413 0.413 2.411 0.134
Mini-Shaft™
6,0 13,0 13,0 68,0 4,3
0.236 0.512 0.512 2.677 0.169
6,0 15,5 15,5 77,5 5,1
MTH-MJ6X1.00ISO4H-BC-S012 10001072 MJ6X1 1,0 – 6.00X4.90 3 DIN371 4H C
0.236 0.610 0.610 3.051 0.201
Thread milling
Thread tapping
Annex
447
www.secotools.com
Thread tapping
MTH-S031
Thread turning
MDT
mm mm mm mm mm
mm TPI
2,8 9,0 9,0 43,87 1,85
MTH-2-56UNC2B-BC-S031 10001113 UNC2-56 – 56.0 2.80X2.10 3 DIN2184-1 2B C
0.110 0.354 0.354 1.727 0.073
2,8 9,0 9,0 48,68 2,1
0.110 0.354 0.354 1.917 0.083
Mini-Shaft™
3,5 10,0 10,0 54,41 2,35

0.138 0.394 0.394 2.142 0.093
4,0 12,0 12,0 54,02 2,85
0.157 0.472 0.472 2.127 0.112
4,5 13,0 13,0 61,02 3,5
0.177 0.512 0.512 2.402 0.138
6,0 16,0 16,0 67,35 3,9
0.236 0.630 0.630 2.652 0.154
7,0 15,0 15,0 76,44 5,1
MTH-1/4-20UNC2B-BC-S031 10001120 UNC1/4-20 – 20.0 7.00X5.50 3 DIN2184-1 2B C
0.276 0.591 0.591 3.009 0.201
8,0 18,0 18,0 86,05 6,6
Thread milling
0.315 0.709 0.709 3.388 0.260

10,0 20,0 20,0 95,55 8,0
0.394 0.787 0.787 3.762 0.315
Thread tapping
Annex
448
www.secotools.com
Thread tapping
MTH-S032
Blind holes – UNJC threads
Thread turning
MDT
mm mm mm mm mm
mm TPI
3,5 8,0 8,0 54,41 2,3
MTH-4-40UNJC3B-BC-S032 10001087 UNJC4-40 – 40.0 3.50X2.70 3 DIN2184-1 3B C
0.138 0.315 0.315 2.142 0.091
4,0 10,0 10,0 54,02 2,8
0.157 0.394 0.394 2.127 0.110
Mini-Shaft™
4,5 11,0 11,0 61,02 3,5
0.177 0.433 0.433 2.402 0.138
6,0 13,5 13,5 67,35 3,9
0.236 0.531 0.531 2.652 0.154
7,0 17,5 17,5 76,82 5,2
MTH-1/4-20UNJC3B-BC-S032 10001091 UNJC1/4-20 – 20.0 7.00X5.50 3 DIN2184-1 3B C
0.276 0.689 0.689 3.024 0.205
8,0 21,0 21,0 86,47 6,7
0.315 0.827 0.827 3.404 0.264
10,0 25,0 25,0 96,03 8,1
0.394 0.984 0.984 3.781 0.319
Thread milling
Thread tapping
Annex
449
www.secotools.com
Thread tapping
MTH-S041
Thread turning
MDT
mm mm mm mm mm
mm TPI
4,0 12,0 12,0 54,41 2,95
MTH-6-40UNF3B-BC-S041 10001123 UNF6-40 – 40.0 4.00X3.00 3 DIN2184-1 3B C
0.157 0.472 0.472 2.142 0.116
4,5 13,0 13,0 61,24 3,5
0.177 0.512 0.512 2.411 0.138
Mini-Shaft™
6,0 16,0 16,0 68,02 4,1

0.236 0.630 0.630 2.678 0.161
6,0 15,0 15,0 77,46 4,6
0.236 0.591 0.591 3.050 0.181
7,0 25,0 15,0 77,46 5,5
MTH-1/4-28UNF3B-BC-S041 10001130 UNF1/4-28 – 28.0 7.00X5.50 3 DIN2184-1 3B C
0.276 0.984 0.591 3.050 0.217
8,0 29,5 18,0 87,03 6,9
0.315 1.161 0.709 3.426 0.272
10,0 33,5 20,0 97,03 8,5
0.394 1.319 0.787 3.820 0.335
Thread milling
Thread tapping
Annex
450
www.secotools.com
Thread tapping
MTH-S042
Blind holes – UNJF threads
Thread turning
MDT
mm mm mm mm mm
mm TPI
4,0 9,5 9,5 54,41 2,95
MTH-6-40UNJF3B-BC-S042 10001094 UNJF6-40 – 40.0 4.00X3.00 3 DIN2184-1 3B C
0.157 0.374 0.374 2.142 0.116
4,5 11,0 11,0 61,24 3,6
0.177 0.433 0.433 2.411 0.142
Mini-Shaft™
6,0 12,5 12,5 68,02 4,15
0.236 0.492 0.492 2.678 0.163
7,0 16,0 16,0 77,73 5,6
MTH-1/4-28UNJF3B-BC-S042 10001098 UNJF1/4-28 – 28.0 7.00X5.50 3 DIN2184-1 3B C
0.276 0.630 0.630 3.060 0.220
8,0 20,0 20,0 87,35 7,0
0.315 0.787 0.787 3.439 0.276
10,0 23,0 23,0 97,35 8,6
0.394 0.906 0.906 3.833 0.339
Thread milling
Thread tapping
Annex
451
www.secotools.com
Thread tapping
MTH-S043
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
MTH-1/4-28EGUNF3B-BC-S043 8,0 30 18,0 87,5 6,6 DIN2184-
10001200 EGUNF1/4-28 – 28.0 8.00X6.20 3 3B C
MTH-1/4-28STIUNF3B-BC-S043 0.315 1.161 0.709 3.443 0.260 1
MTH-10-32EGUNF3B-BC-S043 6,0 23 15,0 77,8 5,1 DIN2184-
Mini-Shaft™
10001199 EGUNF10-32 – 32.0 6.00X4.90 3 3B C

MTH-10-32STIUNF3B-BC-S043 0.236 0.906 0.591 3.062 0.201 1
10001202 EGUNF3/8-24 – 24.0 8.00X6.20 4 3B C
MTH-3/8-24STIUNF3B-BC-S043 0.315 2.992 0.787 3.820 0.386 1
10001201 EGUNF5/16-24 – 24.0 10.00X8.00 3 3B C
MTH-5/16-24STIUNF3B-BC-S043 0.394 1.319 0.787 3.820 0.323 1
Thread milling
Thread tapping
Annex
452
www.secotools.com
Thread tapping
MTH-S044
Thread turning
MDT
mm mm mm mm mm
mm TPI
10001102 EGUNF1/4-28 – 28.0 8.00X6.20 3 3B C
MTH-1/4-28STIUNF3B-BC-S044 0.315 0.709 0.709 3.454 0.260 1
MTH-10-32EGUNF3B-BC-S044 6,0 15 15,0 78,0 5,1 DIN2184-
10001101 EGUNF10-32 – 32.0 6.00X4.90 3 3B C
MTH-10-32STIUNF3B-BC-S044 0.236 0.591 0.591 3.072 0.201 1
Mini-Shaft™
10001103 EGUNF3/8-24 – 24.0 11.00X9.00 4 3B C
MTH-3/8-24STIUNF3B-BC-S044 0.433 0.787 0.787 3.426 0.386 1
10001104 EGUNF5/16-24 – 24.0 10.00X8.00 3 3B C
MTH-5/16-24STIUNF3B-BC-S044 0.394 0.787 0.787 3.439 0.323 1
Thread milling
Thread tapping
Annex
453
www.secotools.com
Thread tapping
MTH-S101
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
2,8 8,0 8,0 44,0 1,6
0.110 0.315 0.315 1.732 0.063
2,8 9,0 9,0 48,87 2,1
MTH-M2.5X0.45ISO6HX-BC-S101 10001135 M2.5 0,45 – 2.80X2.10 3 DIN371 6HX C
0.110 0.354 0.354 1.924 0.083
Mini-Shaft™
3,5 10,0 10,0 54,75 2,5

0.138 0.394 0.394 2.156 0.098
4,0 12,0 12,0 54,5 2,9
MTH-M3.5X0.60ISO6HX-BC-S101 10001137 M3.5 0,6 – 4.00X3.00 3 DIN371 6HX C
0.157 0.472 0.472 2.146 0.114
4,5 13,0 13,0 61,25 3,4
0.177 0.512 0.512 2.411 0.134
6,0 16,0 16,0 68,0 4,3
0.236 0.630 0.630 2.677 0.169
6,0 23,0 15,0 77,2 5,1
0.236 0.906 0.591 3.039 0.201
Thread milling
8,0 29,5 18,0 86,49 6,8

0.315 1.161 0.709 3.405 0.268
10,0 33,5 20,0 95,8 8,6
0.394 1.319 0.787 3.772 0.339
Thread tapping
Annex
454
www.secotools.com
Thread tapping
MTH-S102
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,09 10,4
0.354 3.268 0.906 4.137 0.409
12,0 68,0 25,0 104,4 14,1
0.472 2.677 0.984 4.110 0.555
Mini-Shaft™
16,0 95,0 30,0 133,0 17,7
0.630 3.740 1.181 5.236 0.697
Thread milling
Thread tapping
Annex
455
www.secotools.com
Thread tapping
MTH-S111
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
6,0 23,0 15,0 77,89 5,25
0.236 0.906 0.591 3.067 0.207
8,0 29,5 18,0 87,89 7,25
0.315 1.161 0.709 3.460 0.285
Mini-Shaft™
8,0 29,5 18,0 87,2 7,0

0.315 1.161 0.709 3.433 0.276
10,0 33,5 20,0 97,2 9,0
0.394 1.319 0.787 3.827 0.354
9,0 73,0 21,0 95,8 10,5
0.354 2.874 0.827 3.772 0.413
11,0 71,0 21,0 95,8 12,5
0.433 2.795 0.827 3.772 0.492
Thread milling
Thread tapping
Annex
456
www.secotools.com
Thread tapping
MTH-S112
Blind holes – MJ threads
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
3,5 10,0 10,0 54,75 2,6
0.138 0.394 0.394 2.156 0.102
4,5 13,0 13,0 61,25 3,4
0.177 0.512 0.512 2.411 0.134
Mini-Shaft™
6,0 16,0 16,0 68,0 4,3
0.236 0.630 0.630 2.677 0.169
6,0 23,0 15,0 77,2 5,1
MTH-MJ6X1.00ISO4H-BC-S112 10001206 MJ6X1 1,0 – 6.00X4.90 3 DIN371 4H C
0.236 0.906 0.591 3.039 0.201
8,0 29,5 18,0 86,49 6,9
0.315 1.161 0.709 3.405 0.272
10,0 33,5 20,0 95,8 8,7
0.394 1.319 0.787 3.772 0.343
Thread milling
Thread tapping
Annex
457
www.secotools.com
Thread tapping
MTH-S142
Blind holes – UNJF threads
Thread turning
MDT
• Coating: AlCrN
mm mm mm mm mm
mm TPI
6,0 16,0 16,0 68,02 4,15
0.236 0.630 0.630 2.678 0.163
7,0 25,0 15,0 77,73 5,6
0.276 0.984 0.591 3.060 0.220
Mini-Shaft™
8,0 29,5 18,0 87,03 7,0

0.315 1.161 0.709 3.426 0.276
10,0 33,5 20,0 97,03 8,6
0.394 1.319 0.787 3.820 0.339
Thread milling
Thread tapping
Annex
458
www.secotools.com
Thread tapping
MTH-V015
Thread turning
MDT
• Coating: TiN
mm mm mm mm mm
mm TPI
3,5 18,0 9,0 54,625 2,5
MTH-M3X0.50ISO6H-BC-V015 03019188 M3 0,5 – 3.50X2.70 3 DIN371 6H C
0.138 0.709 0.354 2.151 0.098
4,5 21,0 11,0 61,075 3,4
0.177 0.827 0.433 2.405 0.134
Mini-Shaft™
6,0 25,0 13,0 67,8 4,3
0.236 0.984 0.512 2.669 0.169
6,0 30,0 15,0 77,25 5,1
0.236 1.181 0.591 3.041 0.201
8,0 35,0 18,0 86,5625 6,8
0.315 1.378 0.709 3.408 0.268
10,0 39,0 20,0 95,875 8,6
0.394 1.535 0.787 3.775 0.339
Thread milling
Thread tapping
Annex
459
www.secotools.com
Thread tapping
MTH-V016
Thread turning
MDT
• Coating: TiN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,1875 10,4
0.354 3.268 0.906 4.141 0.409
11,0 81,0 25,0 104,5 12,1
0.433 3.189 0.984 4.114 0.476
Mini-Shaft™
12,0 68,0 25,0 104,5 14,1

0.472 2.677 0.984 4.114 0.555
14,0 81,0 30,0 118,125 15,7
0.551 3.189 1.181 4.651 0.618
16,0 95,0 30,0 133,125 17,7
0.630 3.740 1.181 5.241 0.697
18,0 93,0 34,0 133,125 19,7
0.709 3.661 1.339 5.241 0.776
18,0 113,0 38,0 151,75 21,0
0.709 4.449 1.496 5.974 0.827
Thread milling
20,0 97,0 38,0 151,75 24,0

0.787 3.819 1.496 5.974 0.945
22,0 115,0 45,0 171,79 26,5
0.866 4.528 1.772 6.763 1.043
25,0 113,0 50,0 171,79 29,5
0.984 4.449 1.969 6.763 1.161
28,0 131,0 55,0 190,7 32,0
1.102 5.157 2.165 7.508 1.260
Thread tapping
Annex
460
www.secotools.com
Thread tapping
MTH-V048
Blind holes – NPT threads
Thread turning
MDT
• Vaporised
mm mm mm mm mm
mm TPI
7,95 56,0 14,0 80,0 6,15
MTH-1/16-27NPT-XC-V048 02880750 NPT1/16-27 – 27.0 7.95X5.94 3 DIN/ANSI NORMAL C
0.313 2.205 0.551 3.150 0.242
11,1 64,0 14,0 90,0 8,4
0.437 2.520 0.551 3.543 0.331
Mini-Shaft™
14,27 59,0 20,0 100,0 11,1
0.562 2.323 0.787 3.937 0.437
17,78 67,0 20,0 110,0 14,3
0.700 2.638 0.787 4.331 0.563
17,45 79,0 26,0 125,0 17,9
0.687 3.110 1.024 4.921 0.705
23,01 78,0 26,0 140,0 23,2
0.906 3.071 1.024 5.512 0.913
28,58 58,0 31,0 150,0 29,0
MTH-1-11.5NPT-XC-V048 02880756 NPT1-11.5 – 11.5 28.58X21.41 5 DIN/ANSI NORMAL C
1.125 2.283 1.220 5.906 1.142
Thread milling
Thread tapping
Annex
461
www.secotools.com
Thread tapping
MTH-V050
Blind holes – NPTF threads
Thread turning
MDT
• Vaporised
mm mm mm mm mm
mm TPI
7,95 56,0 14,0 80,0 6,1
MTH-1/16-27NPTF-XC-V050 02880757 NPTF1/16-27 – 27.0 7.95X5.94 3 DIN/ANSI NORMAL C
0.313 2.205 0.551 3.150 0.240
11,1 64,0 14,0 90,0 8,4
0.437 2.520 0.551 3.543 0.331
Mini-Shaft™
14,27 59,0 20,0 100,0 11,0

0.562 2.323 0.787 3.937 0.433
17,78 67,0 20,0 110,0 14,3
0.700 2.638 0.787 4.331 0.563
17,45 79,0 26,0 125,0 17,6
0.687 3.110 1.024 4.921 0.693
23,01 78,0 26,0 140,0 23,0
MTH-3/4-14NPTF-XC-V050 02880762 NPTF3/4-14 – 14.0 23X17.25 5 DIN/ANSI NORMAL C
0.906 3.071 1.024 5.512 0.906
Thread milling
Thread tapping
Annex
462
www.secotools.com
Thread tapping
MTS-K101
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
3,5 18,0 9,0 54,63 2,5
MTS-M3X0.50ISO6HX-XC-K101 03305497 M3 0,5 – 3.50X2.70 4 DIN371 6HX C
0.138 0.709 0.354 2.151 0.098
4,5 21,0 12,0 61,08 3,4
0.177 0.827 0.472 2.405 0.134
Mini-Shaft™
6,0 25,0 13,0 67,80 4,3
0.236 0.984 0.512 2.669 0.169
6,0 30,0 15,0 77,25 5,1
0.236 1.181 0.591 3.041 0.201
8,0 35,0 18,0 86,56 6,8
0.315 1.378 0.709 3.408 0.268
10,0 39,0 20,0 95,88 8,6
0.394 1.535 0.787 3.775 0.339
Thread milling
Thread tapping
Annex
463
www.secotools.com
Thread tapping
MTS-K101-A
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
4,5 21,0 12,0 61,07 3,4
MTS-M4X0.70ISO6HX-XC-K101-A 03305448 M4 0,7 – 4.50X3.40 4 DIN371 6HX C
0.177 0.827 0.472 2.404 0.134
6,0 25,0 13,0 67,80 4,3
Mini-Shaft™

0.236 0.984 0.512 2.669 0.169
6,0 25,0 13,0 67,80 4,3
MTS-M5X0.80ISO6HX-XE-K101-A 03305460 M5 0,8 – 6.00X4.90 5 DIN371 6HX E
0.236 0.984 0.512 2.669 0.169
6,0 30,0 15,0 77,25 5,1
0.236 1.181 0.591 3.041 0.201
6,0 30,0 15,0 78,25 5,1
0.236 1.181 0.591 3.081 0.201
8,0 35,0 18,0 86,56 6,8
0.315 1.378 0.709 3.408 0.268
8,0 35,0 18,0 87,81 6,8
0.315 1.378 0.709 3.457 0.268
Thread milling
10,0 39,0 20,0 95,88 8,6

0.394 1.535 0.787 3.775 0.339
10,0 39,0 20,0 97,38 8,6
0.394 1.535 0.787 3.834 0.339
Thread tapping
Annex
464
www.secotools.com
Thread tapping
MTS-K002
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
20,0 97,0 38,0 151,6 24,0
0.787 3.819 1.496 5.969 0.945
22,0 115,0 45,0 170,2 26,5
0.866 4.528 1.772 6.701 1.043
Mini-Shaft™
25,0 113,0 50,0 170,2 29,5
0.984 4.449 1.969 6.701 1.161
28,0 131,0 55,0 188,8 32,0
1.102 5.157 2.165 7.433 1.260
32,0 102,0 60,0 188,8 35,0
1.260 4.016 2.362 7.433 1.378
32,0 102,0 60,0 187,4 37,5
1.260 4.016 2.362 7.378 1.476
Thread milling
Thread tapping
Annex
465
www.secotools.com
Thread tapping
MTS-K002-A
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
20,0 97,0 38,0 152,5 24,0
0.787 3.819 1.496 6.004 0.945
22,0 115,0 45,0 171,25 26,5
Mini-Shaft™

0.866 4.528 1.772 6.742 1.043
25,0 113,0 50,0 170,2 29,5
0.984 4.449 1.969 6.701 1.161
28,0 131,0 55,0 188,8 32,0
1.102 5.157 2.165 7.433 1.260
32,0 102,0 60,0 188,8 35,0
1.260 4.016 2.362 7.433 1.378
32,0 102,0 60,0 187,4 37,5
1.260 4.016 2.362 7.378 1.476
Thread milling
Thread tapping
Annex
466
www.secotools.com
Thread tapping
MTS-K102
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
6,0 67,0 20,0 86,56 6,8
0.236 2.638 0.787 3.408 0.268
7,0 77,0 23,5 95,88 8,6
0.276 3.031 0.925 3.775 0.339
Mini-Shaft™
9,0 83,0 23,0 105,19 10,4
0.354 3.268 0.906 4.141 0.409
11,0 81,0 25,0 104,50 12,1
0.433 3.189 0.984 4.114 0.476
12,0 68,0 25,0 104,50 14,1
0.472 2.677 0.984 4.114 0.555
14,0 81,0 30,0 118,13 15,7
0.551 3.189 1.181 4.651 0.618
16,0 95,0 30,0 133,13 17,7
0.630 3.740 1.181 5.241 0.697
Thread milling
18,0 93,0 34,0 133,13 19,7
0.709 3.661 1.339 5.241 0.776
18,0 113,0 38,0 151,75 21,0
0.709 4.449 1.496 5.974 0.827
Thread tapping
Annex
467
www.secotools.com
Thread tapping
MTS-K102-A
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 105,19 10,4
0.354 3.268 0.906 4.141 0.409
9,0 83,0 23,0 106,94 10,4
Mini-Shaft™

0.354 3.268 0.906 4.210 0.409
11,0 81,0 25,0 104,50 12,1
0.433 3.189 0.984 4.114 0.476
12,0 68,0 25,0 104,50 14,1
0.472 2.677 0.984 4.114 0.555
12,0 68,0 25,0 106,50 14,1
0.472 2.677 0.984 4.193 0.555
16,0 95,0 30,0 133,13 17,7
0.630 3.740 1.181 5.241 0.697
18,0 93,0 34,0 133,13 19,7
0.709 3.661 1.339 5.241 0.776
Thread milling
18,0 113,0 38,0 151,75 21,0

0.709 4.449 1.496 5.974 0.827
Thread tapping
Annex
468
www.secotools.com
Thread tapping
MTS-K111
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
7,0 67,0 18,0 87,25 9,0
MTS-M10X1.00ISO6HX-XC-K111 03305466 MF10X1.0 1,0 – 7.00X5.50 5 DIN374 6HX C
0.276 2.638 0.709 3.435 0.354
7,0 77,0 20,0 96,56 8,8
0.276 3.031 0.787 3.802 0.346
Mini-Shaft™
9,0 73,0 21,0 96,56 10,75
0.354 2.874 0.827 3.802 0.423
9,0 73,0 21,0 95,88 10,5
0.354 2.874 0.827 3.775 0.413
11,0 71,0 21,0 95,88 12,5
0.433 2.795 0.827 3.775 0.492
12,0 58,0 21,0 95,88 14,5
0.472 2.283 0.827 3.775 0.571
14,0 66,0 24,0 105,88 16,5
0.551 2.598 0.945 4.168 0.650
Thread milling
16,0 80,0 24,0 120,88 18,5
0.630 3.150 0.945 4.759 0.728
Thread tapping
Annex
469
www.secotools.com
Thread tapping
MTS-K121
Blind and through holes – G threads
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
7,0 67,0 13,0 87,51 8,8
MTS-1/8-28G-XC-K121 03305474 G1/8-28 – 28,0 7.00X5.50 4 DIN5156 NORMAL-X C
0.276 2.638 0.512 3.445 0.346
11,0 71,0 15,0 96,32 11,8
0.433 2.795 0.591 3.792 0.465
Mini-Shaft™
12,0 58,0 21,0 96,32 15,25

0.472 2.283 0.827 3.792 0.600
16,0 80,0 21,0 120,01 19,0
0.630 3.150 0.827 4.725 0.748
20,0 77,0 21,0 135,01 24,5
0.787 3.031 0.827 5.315 0.965
25,0 93,0 27,0 153,65 30,75
MTS-1-11G-XC-K121 03305479 G1-11 – 11,0 25.00X20.00 6 DIN5156 NORMAL-X C
0.984 3.661 1.063 6.049 1.211
Thread milling
Thread tapping
Annex
470
www.secotools.com
Thread tapping
MTS-K131
Blind and through holes – UNC threads
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
7,0 25,0 15,6 76,50 5,1
MTS-1/4-20UNC-XC-K131 03305480 UNC1/4-20 – 20.0 8.25X5.5 5 DIN2184-1 2BX C
0.276 0.984 0.614 3.012 0.201
8,0 33,5 18,7 86,12 6,6
0.315 1.319 0.736 3.391 0.260
Mini-Shaft™
10,0 38,0 20,6 95,63 8,0
0.394 1.496 0.811 3.765 0.315
8,0 72,7 20,0 95,01 9,4
0.315 2.862 0.787 3.741 0.370
9,0 81,9 23,0 104,63 10,8
0.354 3.224 0.906 4.119 0.425
12,0 65,7 23,0 103,65 13,5
0.472 2.587 0.906 4.081 0.531
14,0 77,5 30,0 118,02 16,5
0.551 3.051 1.181 4.646 0.650
Thread milling
18,0 90,95 34,0 132,24 19,5
0.709 3.581 1.339 5.206 0.768
Thread tapping
Annex
471
www.secotools.com
Thread tapping
MTS-K141
Blind and through holes – UNF threads
Thread turning
MDT
• Coating: TiAIN
mm mm mm mm mm
mm TPI
7,0 25,0 15,6 77,50 5,5
MTS-1/4-28UNF-XC-K141 03305488 UNF1/4-28 – 28.0 8.25X5.5 5 DIN2184-1 2BX C
0.276 0.984 0.614 3.051 0.217
8,0 33,5 18,7 87,09 6,9
0.315 1.319 0.736 3.429 0.272
Mini-Shaft™
10,0 38,0 20,6 97,09 8,5

0.394 1.496 0.811 3.822 0.335
8,0 72,7 20,0 96,51 9,9
0.315 2.862 0.787 3.800 0.390
9,0 71,9 23,0 106,51 11,5
0.354 2.831 0.906 4.193 0.453
12,0 55,7 23,0 106,12 14,5
0.472 2.193 0.906 4.178 0.571
14,0 62,5 25,0 120,63 17,5
0.551 2.461 0.984 4.749 0.689
Thread milling
18,0 75,95 25,0 135,01 20,4

0.709 2.990 0.984 5.315 0.803
Thread tapping
Annex
472
www.secotools.com
Thread tapping
MF-V060-A
Forming holes – Metric coarse threads
Thread turning
MDT
• Coating: TiN
mm mm mm mm mm
mm TPI
9,0 83,0 23,0 104,75 11,2
MF-M12X1.75ISO6HX-XC-V060-A 02880487 M12 1,75 – 9.00X7.00 5 DIN2174 6HX C
0.354 3.268 0.906 4.124 0.441
11,0 81,0 25,0 103,0 13,1
Mini-Shaft™
0.433 3.189 0.984 4.055 0.516
12,0 68,0 25,0 104,0 15,1
0.472 2.677 0.984 4.094 0.594
14,0 81,0 30,0 116,25 16,9
0.551 3.189 1.181 4.577 0.665
16,0 95,0 30,0 132,5 18,9
0.630 3.740 1.181 5.217 0.744
18,0 93,0 34,0 131,25 20,9
0.709 3.661 1.339 5.167 0.823
18,0 113,0 38,0 149,5 22,65
0.709 4.449 1.496 5.886 0.892
Thread milling
Thread tapping
Annex
473
www.secotools.com
Thread tapping
MF-V063-A
Forming holes – MF threads
Thread turning
MDT
• Coating: TiN
mm mm mm mm mm
mm TPI
9,0 73,0 21,0 95,62 11,45
MF-M12X1.25ISO6HX-XC-V063-A 03000351 MF12X1.25 1,25 – 9.00X7.00 5 DIN2174 6HX C
0.354 2.874 0.827 3.765 0.451
11,0 71,0 21,0 95,5 13,35
Mini-Shaft™

0.433 2.795 0.827 3.760 0.526
12,0 58,0 21,0 95,5 15,35
0.472 2.283 0.827 3.760 0.604
Thread milling
Thread tapping
Annex
474
www.secotools.com
Declaration of conformity
Cemented carbide inserts and insert carriers

Cemented carbide inserts and cemented carbide insert carriers from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco
Tools can make the following declaration.
Thread turning
These products meet all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Elec-
tronic Equipment) and ELV (End of Life Vehicles) requirements.
Products do not contain mercury, lead, hexavalent chromium, cadmium, CFC, HCFC, flame retardants or solvents in concentrations that exceed specifications in the regulations.
Regrinding:
Wet or dry grinding can produce potentially hazardous dusts or mists that can irritate skin, eyes, nose, throat and result in lung damage or disease. To avoid injury use proper
safety precautions and protective equipment.
Disposal:
Seco Tools will buy back used inserts and solid carbide tools for recycling. Inserts and solid carbide tools should be separated from other metal waste (steel, aluminium, copper
etc).
All packing material is fully recyclable.
MDT
CBN and PCD inserts
Inserts from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration.
This product meets all requirements in RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), WEEE (Waste Electrical & Electronic
Equipment) and ELV (End of Life Vehicles) requirements.
Mini-Shaft™
Regrinding:
Disposal:
Seco Tools will buy back used CBN- or PCD-tipped inserts for recycling. Inserts should be separated from other metal waste (steel, aluminium, copper etc). Solid CBN-inserts may
be discarded as landfill waste.
Thread milling
Black oxide insert carriers
Insert carriers from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration.
Disposal:
Used insert carriers may be sent for recycling together with ordinary steel waste (swarf and discarded steel scrap) for recycling.
Thread tapping

Annex
475
www.secotools.com
Cermet inserts
Inserts from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration.
Thread turning

Cermet grade C15M inserts do contain nickel and will leach nickel when in contact with the skin. Amount of leaching is higher than specified in norm SS-EN 1811 Reference
test method for release of nickel from products intended to come into direct and prolonged contact with the skin. These norms are intended for products that are in direct and
prolonged contact with the skin and are therefore not directly applicable for cermet inserts. Persons with known allergic reactions to nickel are advised to wear protective gloves
when handling cermet inserts.
Regrinding:
Disposal:
Used inserts may be recycled. Inserts should be separated from other metal waste (steel, aluminium, copper, etc) including cemented carbide inserts.
MDT
Nickel coated insert carriers

Insert carriers from Seco Tools are not included in the product range intended for the following requirements. Nevertheless Seco Tools can make the following declaration.
Mini-Shaft™
Insert carriers do contain nickel and will leach nickel when in contact with the skin. Amount of leaching is not higher then norm SS-EN 1811 Reference test method for release of
nickel from products intended to come into direct and prolonged contact with the skin.
These norms are intended for products that are in direct and prolonged contact with the skin and are therefore not directly applicable for insert carriers. Persons with known al-
lergic reactions to nickel are advised to wear protective gloves when handling nickel coated insert carriers.
Disposal:
Used tools maybe sent for recycling together with ordinary steel waste (swarf and discarded steel scrap) for recycling.
Thread milling
Thread tapping
Annex
476
www.secotools.com
Intentionally added alloying elements

Cemented carbide Coating
Thread turning
Grade
W Ti Ta Nb Co Cr Ni Mo C N Ru Ti Al C N O Si Nb
CP20 [ [ [ [ [
CP200 [ [ [ [ [ [ [
CP300 [ [ [ [ [ [ [ [ [
CP500 [ [ [ [ [ [ [
CP600 [ [ [ [ [ [ [
C15M [ [ [ [ [ [ [ [ [
CF [ [ [ [ [ [
CM [ [ [ [ [ [
DP2000 [ [ [ [ [ [ [ [ [ [
DP3000 [ [ [ [ [ [ [ [ [ [ [ [
DS2050 [ [ [ [ [ [ [ [
DS4050 [ [ [ [ [ [ [ [
F15M [ [ [ [ [ [ [
F25M [ [ [ [ [ [ [ [ [
F30M [ [ [ [ [ [ [
F40M [ [ [ [ [ [ [
MDT
HX [ [ [ [
H02 [ [ [ [ [
H15 [ [ [ [
H25 [ [ [ [
KX [ [ [ [
MH1000 [ [ [ [ [ [ [
MK1500 [ [ [ [ [ [ [ [ [
MK2050 [ [ [ [ [ [ [ [ [
MM4500 [ [ [ [ [ [ [ [ [
MP1501 [ [ [ [ [ [ [ [ [ [
MP2050 [ [ [ [ [ [ [
MP2501 [ [ [ [ [ [ [ [ [ [
MP3000 [ [ [ [ [ [ [
MS2500 [ [ [ [ [ [ [ [ [ [
MS2050 [ [ [ [ [ [ [ [
Mini-Shaft™
RX1500 [ [ [ [ [ [ [ [ [
RX2000 [ [ [ [ [ [ [ [
RM2020 [ [ [ [
RM2090 [ [ [ [ [ [ [
RN2010 [ [ [ [
RS2090 [ [ [ [ [ [ [
T350M [ [ [ [ [ [ [ [ [ [
T25M [ [ [ [ [ [ [ [
TGH1050 [ [ [ [ [ [ [ [
TGK1500 [ [ [ [ [ [ [ [ [
TGP25 [ [ [ [ [ [ [ [ [ [ [
TGP35 [ [ [ [ [ [ [ [ [ [
TGP45 [ [ [ [ [ [ [ [ [ [
TGS2050 [ [ [ [ [ [ [ [
TH1000 [ [ [ [ [ [ [ [
TH1500 [ [ [ [ [ [ [ [ [
Thread milling
TK0501 [ [ [ [ [ [ [ [ [
TK1501 [ [ [ [ [ [ [ [ [ [
TM1501 [ [ [ [ [ [ [ [ [ [ [ [ [
TM2000 [ [ [ [ [ [ [ [ [ [ [ [
TM2501 [ [ [ [ [ [ [ [ [ [ [ [
TM3501 [ [ [ [ [ [ [ [
TM4000 [ [ [ [ [ [ [ [ [ [ [ [
TP0501 [ [ [ [ [ [ [ [ [ [ [ [
TP1020 [ [ [ [ [ [ [
TP1030 [ [ [ [ [ [ [ [ [ [ [
TP1501 [ [ [ [ [ [ [ [ [ [ [ [
TP25 [ [ [ [ [ [ [ [ [ [ [ [ [
TP200 [ [ [ [ [ [ [ [ [ [ [ [
TP2501 [ [ [ [ [ [ [ [ [ [ [ [ [
TP3501 [ [ [ [ [ [ [ [ [ [ [ [
TP40 [ [ [ [ [ [ [ [
TS2000 [ [ [ [ [ [ [
Thread tapping
TS2050 [ [ [ [ [ [ [ [
TS2500 [ [ [ [ [ [ [
TTP2050 [ [ [ [ [ [ [ [
T250D [ [ [ [ [ [ [
T400D [ [ [ [ [ [ [
T100R [ [ [ [ [ [ [ [
T60M [ [ [ [ [ [ [ [ [
883 [ [ [ [
890 [ [ [ [
Annex
477
www.secotools.com
Workpiece materials – Classification, SMG
Steels, ferritic and martensitic stainless steels

SMG Description Properties Reference kc1.1 mc
Thread turning
P1 Free-cutting steels 360 < Rm < 880 11 SMn30 1500 0,14

Rm = 385 N/mm2
P2 Low-alloy ferritic steels, 320 < Rm < 600 S235JRG2 1600 0,23
C < 0.25%wt Rm = 420 N/mm2
Low-alloy weldable general
structural steels
P3 Ferritic & ferritic/pearlitic steels, 430 < Rm < 610 16 MnCr 5 1800 0,14
C < 0.25%wt Rm = 550 N/mm2
Weldable general structural
steels
Case-hardening steels
P4 Low-alloy general structural 520 < Rm < 1200 C 45E 2000 0,15
steels, 0.25% < C < 0.67%wt Rm = 660 N/mm2
Low-alloy Quench & Temper
MDT
steels
P5 Structural steels, 0.25% < C < 550 < Rm < 1200 42 CrMo 4 2020 0,18
0.67%wt Rm = 700 N/mm2
Quench & Temper steels
P6 Low-alloy through-hardening 520 < Rm < 1200 C 100S 2100 0,17
steels, C > 0.67%wt Rm = 600 N/mm2
Low-alloy spring and bearing
steels
P7 Through-hardening steels, C > 600 < Rm < 1200 100 Cr 6 2160 0,17
0.67%wt Rm = 650 N/mm2
Spring and bearing steels
Mini-Shaft™
P8 Tool steels 600 < Rm < 1200 X 40 CrMoV 5 1 2400 0,20

High Speed Steels (HSS) Rm = 700 N/mm2
P11 Ferritic & martensitic stainless 415 < Rm < 1200 X 20 Cr 13 2000 0,15
steels Rm = 675 N/mm2
P12 Maraging and precipitation- 500 < Rm < 1200 X 5 CrNiCuNb 16 4 2100 0,17
hardening stainless steels Rm = 1100 N/mm2
Free-cutting, austenitic and duplex stainless steels

Thread milling

M1 Free-cutting austenitic stainless X 10 CrNiS 18 9 1700 0,14
steels
M2 Low-alloy austenitic stainless X 5 CrNi 18 10 1920 0,18

steels
M3 Medium-alloy austenitic X 2 CrNiMo 18 14 3 2070 0,17

stainless steels
M4 High-alloy austenitic and duplex X 2 CrNiMoN 22 5 3 2230 0,16

Thread tapping
stainless steels
M5 Difficult high-alloy austenitic X 2 CrNiMoN 25 7 4 2510 0,13

and duplex stainless steels
Annex
478
www.secotools.com
Cast irons
Thread turning
K1 Grey cast irons (GCI) EN-GJL-250 930 0,32
K2 Compacted graphite irons (CGI) EN-GJV-400 1000 0,35
K3 Malleable cast irons (MCI) EN-GJMB-550-4 1050 0,37
K4 Nodular cast irons (SGI) EN-GJS-500-7 1160 0,37
K5 Austempered ductile irons (ADI) EN-GJS-1000-5
MDT
K6 Austenitic lamellar cast irons EN-GJLA-XNiCuCr15-6-2
K7 Austenitic nodular cast irons EN-GJSA-XNiMn23-4
Non-ferrous metals
Mini-Shaft™
N1 Aluminium alloys, Si < 9% AW-7075
N2 Aluminium alloys, 9% < Si < AC-44200

16% Si = 12%
N3 Aluminium alloys, Si >16% AlSi17Cu5
N11 Copper alloys CW614N 740 0,26
Thread milling
Superalloys and titanium
S1 Iron-based superalloys Discalloy
S2 Cobalt-based superalloys Stellite 21
S3 Nickel-based superalloys Inconel 718 2530 0,21 Thread tapping
S11 Titanium, low alloyed, (a) Ti
S12 Titanium, medium alloyed, TiAl6V4 1500 0,24

(a+β)
S13 Titanium, high alloyed, (near β Ti10V2Fe3Al

and β)
Annex
479
www.secotools.com
Hard materials
Thread turning
H3 Case-hardened steels 58 < HRC < 62 16 MnCr 5 2070 0,14

60 HRC
H5 Quenched & Tempered steels 38 < HRC < 56 42 CrMo 4 2320 0,18
50 HRC
H7 Quenched & Tempered steels 56 < HRC < 64 100 Cr 6 2480 0,17
Bearing steels 60 HRC
H8 Tool steels 38 < HRC < 64 X 40 CrMoV 5 1 2750 0,20

High Speed Steels (HSS) 50 HRC
H11 Martensitic stainless steels 38 < HRC < 50 X 20 Cr 13 2300 0,15

45 HRC
MDT
H12 Maraged and precipitation- 1200 < Rm < 1650 X 5 CrNiCuNb 16 4 2410 0,17
hardened stainless steels Rm = 1450 N/mm2
H21 Manganese steels 23 < HRC < 64 X 120 Mn 12

50 HRC
H31 White cast irons 50 < HRC < 64 EN-GJN-HV600(XCr11)

55 HRC
Other difficult materials

Mini-Shaft™

PM1 Low-alloy PM-materials F-0008 Fe-0.7C
PM2 Medium-alloy PM-materials FLC-4608

Fe2Cu1.8Ni
0.5Mo0.2Mn0.8C
PM3 High-alloy PM-materials
Exhaust valve seat materials,
etc.
Thread milling
HF1 Hardfacing alloys

Welded or plasma-deposited
iron-based alloys
HF2 Hardfacing alloys
Welded or plasma-deposited
cobalt- and nickel-based alloys
CC1 Sintered tungsten carbide G50
Thread tapping
Annex
480
www.secotools.com
Plastics and Composites

Thread turning
TS1 Thermosetting polymers Urea formaldehyde (UF)
TS2 Thermosetting carbon-fibre T300 T700 T800 HTA-S IMA -

composites Epoxy (M21)...
TS3 Thermosetting glass-fibre Epoxy - HX..(42..)/E glass

composites (7781...)...
TS4 Thermosetting aramide-fibre Kevlar 49

composites
TP1 Thermoplastic polymers Polycarbonate (PC)
MDT
TP2 Thermoplastic carbon-fibre PPS/PEEK - T300..
composites
TP3 Thermoplastic glass-fibre PPS/PEEK - E-glass or

composites A-glass...
TP4 Thermoplastic aramide-fibre

composites
Graphite
Mini-Shaft™
GR1 Graphite R 8500
Thread milling
Thread tapping
Annex
481
www.secotools.com
SMG
SMG EN EN-Nr W.-Nr DIN AFNOR BS UNI JIS SS UNS
Thread turning
11 SMn 30 1.0715 1.0715 9 SMn 28 S 250 230 M 07 CF 9 SMn 28 SUM 22 1912 G12130
11 SMnPb 30 1.0718 1.0718 9 SMnPb 28 S 250 Pb CF 9 SMnPb 28 SUM 22 L 1914 G12134
10 S 20 1.0721 1.0721 10 S 20 10 F 1 210 M 15 CF 10 S 20
1.0722 10 SPb 20 10 PbF 2 CF 10 SPb 20
P1 15 SMn 13 1.0725 1.0723 15 S 20 210 A 15 SUM 32 1922
35 S20 1.0726 1.0726 35 S 20 35 MF 4 212 M 36 1957 G11400
46 S20 1.0727 1.0727 46 S 20 45 MF 4 212 M 44 1973 G11460
11 SMn 37 1.0736 1.0736 9 SMn 36 S 300 240 M 07 CF 9 SMn 36 G12150
11 SMn 37 1.0736 1.0736 9 SMn 36 S 300 240 M 07 CF 9 SMn 36 G12150
S235JR 1.0037 1.0037 St 37-2 E 24-2 Fe 360 B STKM 12 C 1311
S235JRG2 1.0038 1.0116 St 37-3 E 24-3, E 24-4 4360-40 C Fe 360 D FF 1312, 1313
S275J2G3 1.0144 1.0144 St 44-3 N E 28-3, E 28-4 4360-43 C Fe 430 D FF SM 41 C 1412, 1414
C 10 1.0301 1.0301 C 10 34 C 10, XC 10 045 M 10 C 10 S 10 C G10100
P2 1.0401 C 15 37 C 12, XC 18 080 M 15 C 15, C 16 1350 G10170
C22 1.0402 1.0402 C 22 C 20 050 A 20 C 20, C 21 1450 G10200
S355JR 1.0570 1.0570 St 52-3 E 36-3, E 36-4 4360-50 C Fe 510 B SM 50 YA 2172, 2132
MDT
C 15R 1.1141 1.1141 Ck 15 XC 15, XC 18 080 M 15 C 15, C 16 S 15 C, S 15 CK 1370 G10170

1.1158 Ck 25 XC 25 060 A 25 C 25 S 25 C G10250
1.2162 21 MnCr 5 20 NC 5 SCR 420 H
16 Mo 3 1.5415 1.5415 15 Mo 3 15 D 3 1501-240 16 Mo 3 2912
1.5423 16 Mo 5 1503-245-420 16 Mo 5 SB 450 M G45200
14 NiCr 14 1.5752 1.5752 14 NiCr 14 12 NC 15 655 M 13 SNC 815 (H) G33106
1.5919 15 CrNi 6 16 NC 6 S 107 16 CrNi 4
18 NiCrMo 7 6 1.6587 1.6587 18 CrNiMo 7 6 18 NCD 6 820 A 16 18 NiCrMo 7
P3 16 MnCr 5 1.7131 1.7131 16 MnCr 5 16 MC 5 527 M 17 16 MnCr 5 SCR 415 2511 G51170
16 MnCrS 5 1.7139 1.7139 16 MnCrS 5
20 MnCr 5 1.7147 1.7147 20 MnCr 5 20 MC 5 20 MnCr 5 SMnC 420 (H) G51200
20 MnCrS 5 1.7149 1.7149 20 MnCrS 5 20 MnCrS 5 SMnC 21 H
Mini-Shaft™
13 CrMo 4 5 1.7335 1.7335 13 CrMo 4 4 15 CD 3.5 1501-620 Gr. 27 14 CrMo 4 5 2216

1.7337 16 CrMo 4 4 15 CD 4.5 1501-620 Gr. 27 14 CrMo 4 5 2216
10 CrMo 9 10 1.7380 1.7380 10 CrMo 9 10 10 CD 9.10 1501-622 Gr. 31 12 CrMo 9 10 2218 J21890
C35 1.0501 C 35 55 C 35 060 A 35 C 35 1550 G10350
E 335 1.0503 1.0503 C 45 65 C 45 80 M 46 C 45 S 45 C 1650 G10430
C40 1.0511 C 40 60 C 40 080 M 40 C 40 S 40 C
E 360 1.0070 1.0535 St 70-2 A 70-2 Fe 690 1655
C60 1.0601 1.0601 C 60 CC 55 080 A 62 C 60 G10600
P4 1.1157 40 Mn 4 35 M 5 150 M 36 G10390
G 28 Mn6 1.1165 1.1165 30 Mn 5 120 M 36 SMn 1 H, SCMn 2 G13300
C 35E 1.1181 1.1181 Ck 35 XC 38 H1 080 M 36 C 35 S 35 C 1572 G10340
C 45E 1.1191 1.1191 Ck 45 XC 42 080 M 46 C 45 S 45 C 1672 G10420
C 60E 1.1221 1.1221 Ck 60 XC 60 080 A 62 C 60 S 58 C 1665, 1678 G10640
1.1740 C 60 W Y3 55 SK 7
Thread milling
55 SiCr7 1.7100 1.0904 55 Si 7 55 S 7 250 A 53 55 Si 8 2085, 2090

1.2330 35 CrMo 4 34 CD 4 708 A 37 35 CrMo 4 2234 T51620
1.2542 45 WCrV 7 BS 1 45 WCrV 8 KU 2710 T41901
1.2714 1.2714 56 NiCrMoV 7 BH 224-5 56 NiCrMoV7-KU SKT 4 T61206
1.5121 46 MnSi 4
1.5710 36 NiCr 6 35 NC 6 640 A 35 SNC 236
1.5736 36 NiCr 10 35 NC 11 35 NiCr 9 SNC 631 (H)
36 CrNiMo 4 1.6511 36 CrNiMo 4 40 NCD 3 816 M 40 38 NiCrMo 4 (KB) G98400
P5 34 CrNiMo 6 1.6582 1.6582 34 CrNiMo 6 35 NCD 6 817 M 40 35 NiCrMo 6 (KW) SNCM 447 2541 G43400
34 Cr 4 1.7033 1.7033 34 Cr 4 32 C 4 530 A 32 34 Cr 4 (KB) SCR 430 (H) G51320
41 Cr 4 1.7035 1.7035 41 Cr 4 42 C 4 530 M 40 41 Cr 4 SCR 440 (H) G51400
25 CrMo 4 1.7218 1.7218 25 CrMo 4 25 CD 4 S 708 M 25 25 CrMo 4 (KB) SCM 425 2225 G41300
42 CrMo 4 1.7225 1.7225 42 CrMo 4 42 CD 4 708 M 40 42 CrMo 4 SCM 440 (H) 2244 G41400
Thread tapping
1.7361 32 CrMo 12 30 CD 12 722 M 24 32 CrMo 12 2240

50 CrV 4 1.8159 1.8159 50 CrV 4 50 CV 4 735 A 50 51 CrV 4 SUP 10 2230 H61500
41 CrAlMo 7 10 1.8509 1.8509 41 CrAlMo 7 40 CAD 6.12 905 M 39 41 CrAlMo 7 SACM 645 2940 K24065
C 67S 1.1231 1.1231 Ck 67 XC 68 060 A 67 C 70 1770 G10700
C 100S 1.1274 1.1274 Ck 101 060 A 96 SUP 4 1870 G10950
P6 C 105U 1.1545 1.1545 C 105 W1 Y1 105 C 100 KU 1880
1.1645 C 105 W2 Y1 105 C 100 KU SK 3
1.1663 C 125 W Y2 120 C 120 KU SK 2
Annex
482
www.secotools.com
SMG
U.N.E./ I.H.A. AISI / ASTM GOST ČSN Misc. Brands Condition Structure
Thread turning
1213 Annealed
12 L 13 Annealed
1108 Annealed
11 L 08 Annealed
Annealed
1140 40 Annealed
1146 Annealed
1215 Annealed
12 L 14 Annealed
16D Annealed
A573 Grade 58 18kp 11 378 Annealed
A573 Grade 70 St14kP 11 448 Annealed
1010 10 Annealed
F.1110 1015 15 Annealed
1020, 1023 20 12 024 Annealed
17G1S 11 523 Annealed
MDT
F.1511 1015 15 Annealed
F.1120 1025 25 Annealed
Annealed
A204 Grade A 15 020 Annealed
4520 Annealed
3310, 9314 20X2H4A 16 420 Annealed
4320 16 220 Annealed
Annealed
F.1516 5115 12KHN2 14 220 Annealed
18HG Annealed
5120 20KH 14 221 Annealed
5120 H 20KH Annealed
Mini-Shaft™
A182-F11, A182-F12 12KHM 15 121 Annealed
A387 Grade 12 Cl. 2 Annealed
F.155 A182-F22 12KH8 15 313 Annealed
F.1130 1035 35 12 040 Annealed
F.5110 1045 45 12 050 Annealed
1040 40 12 041 Annealed
F.1150 1055 55 Annealed
1060 60 12 061 Annealed
1039 40G Annealed
1330 30G2 Annealed
F.1135 1035 35 Annealed
F.1140 1045 45 12 050 Annealed
F.1150 1064 60 Annealed
1060 60 Annealed
Thread milling
F.144 9255 55S2 Annealed
F.1250 4135 35KHM Annealed
F.5241 S1 5KHV2S Annealed
L6 5KHNV Annealed
5045 Annealed
3135 Quenched & Tempered
3435 Annealed
F.1280 4340 38H2N2MA 16 343 Annealed
5132 35KH Quenched & Tempered
5140 40H 14 140 Quenched & Tempered
F.1251 4130 20KHM 15 130 Quenched & Tempered
F.1252 4142, 4140 38HM 15 142 Annealed
F.1252 4142, 4140 38HM 15 142 Quenched & Tempered
Thread tapping
Quenched & Tempered

F.143 6150 50KHFA 15 260 Quenched & Tempered
F.1740 A355 Cl. A Annealed
F.5103 1070 70 Annealed
F.5117 1095 Annealed
F.5118 W1 U10A Annealed
U10 Annealed
W1 U13 Annealed
Annex
483
www.secotools.com
SMG
Thread turning
107 CrV 3 1.2210 1.2210 115 CrV 3 100 C 3 107 CrV 3 KU T61202
1.2510 100 MnCrW 4 90 MWCV 5 BO 1 95 MnWCr 5 KU SKS 3 2140 T31501
P7
90 MnCrV 8 1.2842 1.2842 90 MnCrV 8 90 MV 8 BO 2 90 MnVCr 8 KU T31502
100 Cr 6 1.3505 1.3505 100 Cr 6 100 C 6 534 A 99 100 Cr 6 SUJ 2 2258 G51986
X 210 Cr 12 1.2080 1.2080 X 210 Cr 12 Z 200 C 12 BD 3 X 210 Cr 13 KU SKD 1 T30403
1.2343 X 38 CrMoV 5 1 Z 38 CDV 5 BH 11 X 37 CrMoV 5 1 KU SKD 6 T20811
X 40 CrMoV 5 1 1.2344 1.2344 X 40 CrMoV 5 1 Z 40 CDV 5 BH 13 X 40 CrMo 5 1 1 KU SKD 61 2242 T20813
X 100 CrMoV 5 1.2363 1.2363 X 100 CrMoV 5 1 Z 100 CDV 5 BA 2 X 100 CrMoV 5 1 KU SKD 12 2260 T30102
1.2365 X 32 CrMoV 3 3 32 DCV 28 BH 10 30 CrMoV 12 27 KU SKD 7 T20810
1.2436 X 210 CrW 12 X 215 CrW 12 1 KU SKD 2 2312
1.2601 X 165 CrMoV 12 X 165 CrMoW 12 KU 2310
P8
1.2713 55 NiCrMoV 6 55 NCDV 7 SKT 4 T61206
HS 6-5-2-5 1.3243 1.3243 S 6-5-2-5 Z 85 WDKCV 06-05-05-04-02 HS 6-5-2-5 SKH 55 2723
HS 2-10-1-8 1.3247 1.3247 S 2-10-1-8 Z 110 DKCWV 09-08-04 BM 42 HS 2-9-1-8 SKH 51 T11342
HS 18-1-2-5 1.3255 1.3255 S 18-1-2-5 Z 80 WKCV 18-05-04-01 BT 4 HS 18-1-1-5 SKH 3 T12004
HS 6-5-2 1.3343 1.3343 S 6-5-2 Z 85 WDCV 06-05-04-02 BM 2 HS 6-5-2 SKH 9, SKH 51 2722 T11302
MDT
HS 2-9-2 1.3348 1.3348 S 2-9-2 Z 100 DCWV 09-04-02-02 HS 2-9-2 SKH 58 2782 T11307
HS 18-0-1 1.3355 1.3355 S 18-0-1 Z 80 WCV 18-04-01 BT 1 HS 18-0-1 SKH 2 T12001
X 6 Cr 13 1.4000 1.4000 X 6 Cr 13 Z 6 C 12 403 S 17 X 6 Cr 13 SUS 403 2301 S41008
X 20 Cr 13 1.4021 1.4021 X 20 Cr 13 Z 20 C 13 420 S 37 X 20 Cr 13 SUS 420 J 1 2303 S42000
P11
X 70 CrMo 15 1.4109 1.4109 X 65 CrMo 14 Z 70 D 14 SUS 440 A S44002
X 90 CrMoV 18 1.4112 1.4112 X 90 CrMoV 18 Z 2 CND 18 05 409 S 19 X CrTi 12 SUS 440 B 2327 S44003
X 105 CrMo 17 1.4125 1.4125 X 105 CrMo 17 Z 100 CD 17 X 105 CrMo 17 SUS 440 C S44004
X 3 CrNIMo 13 3 1.4313 1.4313 X 5 CrNi 13 4 Z 5 CN 13.4 425 C 11 X 6 CrNi 13 04 SCS 5 2385 S41500
X 18 CrN 28 1.4749 1.4749 X 18 CrN 28 Z 18 C 25 2322 S44600
Mini-Shaft™
X 6 NiCrTiMoV 25 15 1.4534 1.4534 X 3 CrNiMoAl 13 8 2 S13800

X 4 CrNiCuNb 16 4 1.4540 1.4540 X 4 CrNiCuNb 16 4 S15500
1.4540 1.4540 X 4 CrNiCuNb 16 4 Z 4 CNUNb 16.4 M S15500
X 5 CrNiCuNb 16 4 1.4542 1.4542 X 5 CrNiCuNb 16 4 SUS 630 S17400
X 5 CrNiCuNb 17 4 1.4548 1.4542 X 5 CrNiCuNb 17 4 Z 6 CNU 17.4 SCS 24, SUS 630 S17400
P12
X 7 CrNiAl 17 7 1.4564 1.4564 X 7 CrNiAl 17 7 Z 9 CAN 17.7 301 S 81 X 7 CrNiAl 17 7 SUS 631 2388 S17700
X 2 NiCoMoTi 18 12 4 1.6356 1.6356 X 2 NiCoMoTi 18 12 4 K93160
X 2 NiCoMoTi 18 9 5 1.6358 1.6358 X 2 NiCoMoTi 18 9 5 Z 2 NKD 19-09 K93120
X 2 NiCoMo 18 9 5 1.6358 1.6358 X 2 NiCoMoTi 18 9 5 Z 2 NKD 19-09 K93120
X 2 NiCoMo 18 8 5 1.6359 1.6359 X 2 NiCoMo 18 8 5 S 162 K92890
M1 X 10 CrNiS 18 9 1.4305 1.4305 X 10 CrNiS 18 9 Z 10 CNF 18.09 303 S 31 X 10 CrNi 18 09 SUS 303 2346 S30300
X 2 CrNi 19 11 1.4306 1.4306 X 2 CrNi 19 11 Z 2 CN 18.10 304 S 12 X 3 Cr Ni 18 11 SUS 304 L 2352 S30403
Thread milling
X 5 CrNi 18 10 1.4301 1.4301 X 5 CrNi 18 10 Z 6 CN 18.09 304 S 31 X 5 CrNi 18 11 SUS 304 2333 S30400
X 5 CrNiMo 17 12 2 1.4401 1.4401 X 5 CrNiMo 17 12 2 Z 3 CND 17.11.1 316 S 31 X 5 CrNiMo 17 12 SUS 316 2347 S31600
M2
X 6 CrNiNb 18 10 1.4550 1.4550 X 6 CrNiNb 18 10 Z 6 CNNb 18.10 347 S 31 X 6 CrNiNb 18 11 SUS 347 2338 S34700
X 9 CrNi 18 8 1.4310 1.4310 X 12 CrNi 17 7 Z 12 CN 17.07 301 S 21 X 12 CrNi 17 07 SUS 301 (2331) S30100
X 12 CrNi 18 8 1.4300 1.4300 X 12 CrNi 18 8 Z 12 CN 18 302 S 25 SUS 302 2331 S30200
X 2 CrNiMo 18 14 3 1.4435 1.4435 X 2 CrNiMo 18 14 3 Z 2 CND 17.13 316 S 12 X 2 CrNiMo 17 13 2 SCS 16, SUS 316 L 2353 S31603
X 2 CrNiMoN 17 13 3 1.4429 1.4429 X 2 CrNiMoN 17 13 3 Z 2 CND 17.13 Az 316 S 62 X 2 CrNiMoN 17 13 3 SUS 316 LN 2375 S31653
X 2 CrNiN 18 10 1.4311 1.4311 X 2 CrNiN 19 11 Z 2 CN 18 .10 Az 304 S 62 X 2 CrNiN 18 11 SUS 304 LN 2371 S30453
M3
X 3 CrNiMo 18 12 3 1.4466 1.4466 X 5 CrNi 18 15 317 S 16 X 5 CrNi 18 15 SUS 317 2366 S31700
X 9 CrNiSiNCe 21 11 2 1.4835 1.4893 X 9 CrNiSiNCe 21 11 2 310 S 31 2368 S30815
X 12 CrNi 25 21 1.4335 1.4335 X 12 CrNi 25 21 Z 12 CN 25.20 310 S 24 X 6 CrNi 26 20 SUH 310, SUS 310 S 2361 S31008
X 2 CrNiMoN 22 5 3 1.4462 1.4462 X 2 CrNiMoN 22 5 Z 2 CND 22.05 Az 332 S 15 X 2 CrNiMoN 22 5 2377 S31803
X 2 CrNiMoSi 19 5 1.4424 1.4417 X 2 CrNiMoSi 19 5 Z 2 CND 18.05.03 2376 S31500
M4 X 2 NiCrMoCu 25 20 5 1.4539 1.4539 X 2 NiCrMoCu 25 20 5 Z 2 NCDU 25 20 904 S 13 2562 N08904
Thread tapping
X 3 CrNiMo 27 5 2 1.4460 1.4460 X 4 CrNiMo 27 5 2 Z 3 CND 25.7 Az X 3 CrNiMo 27 5 2 SUS 329 J 1 2324 S32900
X 5 CrNiCuNb 16 4 1.4980 1.4943 X 4 NiCrTi 25 15 Z 6 NCTDV 25.15 HR 51 SUH 660 2570 S66286
X 1 CrNiMoN 20 18 7 1.4547 1.4529 X 1 CrNiMoN 20 18 7 Z 1 CNDU 20.18.05 Az X 1 CrNiMoN 20 18 7 2778 S31254
X 1 CrNiMoN 25 22 8 1.4652 1.4652 X 2 CrNiMoN 25 22 7 S32654
M5
X 10 NiCrAlTi 32 20 1.4876 1.4876 X 10 NiCrAlTi 32 20 Z 10 NC 32.21 NCF 800 N08800
X 2 CrNiMoN 25 7 4 1.4410 1.4410 X 2 CrNiMoN 25 7 4 Z 3 CND 25.07 Az X 2 CrNiMoN 25 7 4 2328 S32750
Annex
484
www.secotools.com
SMG
Thread turning
F.520L L2 11KHF Annealed
F.5220 O1 9KHVG Annealed
O2 9G2F Annealed
F.5230 52100 SHKH15 14 109 Annealed
F.5212 D3 KH12 Annealed
H11 4KH5MFS Annealed
F.5318 H13 4KH5MF1S Annealed
F.5227 A2 9KH5VF Annealed
H10 3KH3M3F Annealed
F.5213 KH12 Annealed
KH12MF Annealed
F.520.S L6 5KHNM Annealed
F.5613 M35 R6M5K5 Annealed
M42 R2AM9K5 Annealed
T4 R18K5F2 Annealed
F.5603 M2 R6M5 Annealed
MDT
M7 Annealed
T1 R18 Annealed
403 08KH13 Annealed Ferritic
F.3401 410, CA-15 12KH13, 08KH13 Annealed Martensitic
F.3113 430 12KH17 Annealed Ferritic
F.5261 420 20KH13 17 022 Annealed Martensitic
F.3404 420 40KH13 Annealed Martensitic
440 A Annealed Martensitic
440 B 95KH18 Annealed Martensitic
440 C 95KH18 Annealed Martensitic
A182 F6NM F6NM Annealed Martensitic
446 15KH28 Annealed Ferritic
Mini-Shaft™
XM-13 PH 13-8 Mo Solution annealed Austenitic
XM-12 15-5 PH H1150 Martensitic
XM-12 15-5 PH Solution annealed Martensitic
SAE 630 17-4 PH H1150 Martensitic
630 17-4 PH Solution annealed Martensitic
631 09KH17N7YU1 17-7 PH Solution annealed Austenitic/Ferritic
AMS 6515 Marage 350 Solution annealed Martensitic
AMS 6514 Marage 300, Vascomax C300 Solution annealed Martensitic
AMS 6512 Marage 250, Vascomax C250 Solution annealed Martensitic
F.3508 303 12KH19N9 Annealed Austenitic
F.3504 304 L 03KH18N11 Annealed Austenitic
Thread milling
F.3504 304 08KH18N10 17 240 Annealed Austenitic
F.3534 316 08KH17H13M2T 17 346 Annealed Austenitic
F.3524 347 08KH18N12B Annealed Austenitic
F.3517 301 07KH16N6 Annealed Austenitic
302 12KH18N9 Annealed Austenitic
F.3533 (316 L) 03KH17N14M3 17 349 Annealed Austenitic
316 LN 03KH16N15M3 Annealed Austenitic
F.3541 304 LN 03KH18N11 Annealed Austenitic
317 08KH17H15M3T Annealed Austenitic
253 MA Annealed Austenitic
310 S 12KH25N20 Annealed Austenitic
329 LN SAF 2205 Annealed Duplex
3RE60 Annealed Duplex
904L Annealed Super austenitic
Thread tapping
329 Annealed Duplex

660 A286 Solution annealed Austenitic
254 SMO Annealed Super austenitic
654 SMO Annealed Super austenitic
Alloy 800 Annealed Austenitic
F 53 SAF 2507 Annealed Super duplex
Annex
485
www.secotools.com
SMG
Thread turning
EN-GJL-150 0.6150 0.6150 GG-15 Ft 15 D Grade 150 G15 FC 150 01 15-00 F11601
K1 EN-GJL-250 0.6250 0.6250 GG-25 Ft 25 D Grade 260 G25 FC 250 01 25-00 F12401
EN-GJL-215 GG-220 HB 02 19
EN-GJV-300 GJV-300
EN-GJV-350 GJV-350
K2 EN-GJV-400 GJV-400
EN-GJV-450 GJV-450
EN-GJV-500 GJV-500
K3 EN-GJMB-550-4 0.8155 GTS-55-04 P 540/5 P 540/5 P 55-04 PCMP55-04 08 54-00 F24130
EN-GJS-350-22 0.7033 0.7033 GGG-35.3 FGS 370-17 Grade 350/22 FCD 350-22L 07 17-15
EN-GJS-400-15 0.7040 0.7040 GGG-40 FGS 400-12 Grade 420/12 GS 400-12 FCD 400-18L 07 17-02 F32800
EN-GJS-400-18 0.7043 0.7043 GGG-40.3 FGS 370-17 Grade 370/17 GSO 42/17 07 17-12 F32800
K4
EN-GJS-500-7 0.7050 0.7050 GGG-50 FGS 500-7 Grade 500/7 GS 500-7 FCD 500-7 07 27-02 F33800
MDT
ADI grade 5
EN-GJS-1000-5 GJS-1000-5 ADI grade 2
K5 EN-GJS-1200-2 GJS-1200-2 ADI grade 3
EN-GJLA-XNiCr 20-2 0.6660 0.6660 GGL-NiCr 20 2 FGL Ni20 Cr2 Grade F2 05 23-00 F41002
K6 EN-GJLA-XNiCr 30-3 0.6676 0.6676 GGL-NiCr 30 3 FGL Ni30 Cr3 Grade F3 F41004
EN-GJLA-XNiCuCr 15-6-2 0.6655 0.6655 GGL-NiCuCr 15 6 2 FGL Ni15 Cu6 Cr2 Grade F1 F41000
EN-GJSA-XNiMn 13-7 0.7652 0.7652 GGG-NiMn 13 7 FGS Ni13 Mn7 Grade S6 07 72-00
EN-GJSA-XNiCr 20-2 0.7660 0.7660 GGG-NiCr 20 2 FGS Ni20 Cr2 Grade S2 F43000
K7 EN-GJSA-XNiMn 23-4 0.7673 0.7673 GGG-NiMn 23 4 FGS Ni23 Mn4 Grade S2M F43010
Mini-Shaft™
EN-GJSA-XNiCr 30-3 0.7676 0.7676 GGG-NiCr 30 3 FGS Ni30 Cr3 Grade S3 F43003
EN-GJSA-XNi 35 0.7683 0.7683 GGG-Ni 35 FGS Ni35 F43006
AW-1050A Al99.5 3.0255 Al99.5 A-5/1050A 1B (A1050) 4007 AA1050A
AW-2011 AlCuBiPb 3.1655 AlCuBiPb A-U5PbBi/2011 FC1 A2011 4355 AA2011
AW-2014 AlCuSiMn 3.1255 AlCuSiMn A-U4SG/2014 H15 4338 AA2014
AW-5005 AlMg1 3.3315 AlMg1 A-G0.6 N41 4106 AA5005
AW-6060 AlMgSi0.5 3.3206 AlMgSi0.5 A-GS/6060 (H9) 4103 AA6060
AW-6063 AlMgSi0.7 3.3210 AlMgSi0.7 A-GSUC/6061 (H10) (A6063) 4104, 4107 AA6005
AW-3103 AlMn1 3.0515 AlMn1 N3 4054 AA3103
N1 AW-3003 AlMn1Cu 3.0517 AlMn1Cu A-M1/3003 A3003 AA3003
AW-7020 AlZn4.5Mg1 3.4335 AlZn4.5Mg1 A-Z5G/7020 H17 4425 AA7020
AW-7075 3.4365 AlZnMgCu1.5 A-Z5GU/7075 2L95/2L96 A7075 AA7075
AC-42000 3.2341 G-AlSi5Mg A-S7G LM25 3599 AC 4C 4244
AC-46200 AlSi8Cu3(Si) 3.2161 G-AlSi8Cu3 4251 A13800
Thread milling
MG-P-63 MgAl6Zn 3.5612 G-MgAl6Zn G-A6-Z1 MAG-E-121 M11600

MG-P-61 MgAl8Zn 3.5812 G-MgAl8Zn (G-A7-Z1)
MN65120 MgSe3Zn2Zr1 3.5103 G-MgSe3Zn2Zr1 ZRE1 MAG6-TE M12330
AC-43400 AlSi10Mg(Fe) 3.2381 G-AlSi10Mg A-S10G LM9 4253 A13600
N2 AC-44200 AlSi12 3.2382 GD-AlSi12
AW-6082 AlMgSi1 3.2315 AlMgSi1 A-SGM0.7/6082 H30 4212 AA6082
N3 AlSi17Cu5 ADC14
CC331G 2.0940.01 CuAl10Fe CuAl10Fe AB1 5710 C95200
CC333G 2.0975.01 CuAl10Ni CuAl10Ni5Fe5 AB2 5716 C95500
CuNi10Fe1Mn 2.0872 CuNi10Fe1Mn CuNi10Fe1Mn CN102 5667 C70600
CuNi10Zn45
CW408J 2.0790 CuNi18Zn19Pb CuNi18Zn19Pb1 C76300
CW352H 2.1176 CuPb10Sn CuSn10Pb10 LB2 5640 C93700
CC480K 2.1050.01 CuSn10 CuSn10 CT1 5443 C90700
Thread tapping
2.1087 CuSn10Zn 5458 C90500

N11
CW452K CuSn6 2.1020 CuSn6 CuSn6 PB103 C5191 5428 C51900
CW502L CuZn15 2.0240 CuZn15 CuZn15 CZ102 C2300 5112 C23000
CW706R CuZn28Sn1 2.0470 CuZn28Sn1 CuZn29Sn1 5220 C44300
CW508L CuZn37 2.0321 CuZn37 CuZn37 CZ108 5150 C27200
CW717R CuZn38Sn1 2.0530 CuZn38Sn1 C46400
CW614N CuZn39Pb3 2.0401 CuZn39Pb3 CuZn39Pb3 CZ121 5170 C38500
CW612N CuZn40Pb2 2.0402 CuZn40Pb2 CuZn39Pb2 CZ120 5168 C37800
CW622N CuZn44Pb2 2.0410 CuZn44Pb2 CZ104 5272 C68700
Annex
486
www.secotools.com
SMG
Thread turning
A48 25 B Sc 15 422 415 Grey cast iron (GCI)
A48 50 B Sc 35 Grey cast iron (GCI)
G 3500 Grey cast iron (GCI)
Grade 350 Compacted graphite iron (CGI)
Grade 400-15 Compacted graphite iron (CGI)
A220 60004 Tempered Malleable cast iron (MCI)
Nodular cast iron (SGI)
FGE 38-17 60-40-18 Vc 42-12 422 304 Nodular cast iron (SGI)
60-40-18 Vc 42-12 Nodular cast iron (SGI)
FGE 50-7 A536, 80-55-06 Vc 50-2 422 305 Nodular cast iron (SGI)
FGE 60-2 A476, 80-60-03 Vc 60-2 422 306 Nodular cast iron (SGI)
MDT
FGE 70-2 A536, 100-70-03 Vc 70-2 Nodular cast iron (SGI)
1600/1300/- Austempered ductile iron (ADI)
1050/700/7 Austempered ductile iron (ADI)
A436 Type 2 Ni-Resist 2 Austenitic lamellar cast iron
Nodumag Austenitic nodular cast iron
A436 Type D-2 Ni-Resist D-2 Austenitic nodular cast iron
A439 Type D-2M Ni-Resist D-2M Austenitic nodular cast iron
Mini-Shaft™
B26
A380
Thread milling
AZ61A
AZ80A
AMS 4442
B85
A413.2
B390.0
CA952 BrА9ZH3L
CA955 BrА10ZH4N4L
CA937 Thread tapping
BrOF6.5-0.15
L90
LOMsh70-1-0.05
LO60-1
LАMsh77-2-0.05
Annex
487
www.secotools.com
SMG
Thread turning
S1
S2
NiMo30 2.4810 N10002

NiMo16Cr15W 2.4819 N10276
NiCr19Fe19Nb5Mo3 2.4668 N07718

S3 2.4669 N07750
NiCr20TiAl 2.4631 N07080
NiCr19Co18Mo4Ti3Al3 N07500
NiCr20Co13Mo4Ti3Al 2.4654 N07001
3.7024
S11
R54620
R56320
S12
TiAl6V4 3.7164 R56400
MDT
S13 TiV10Fe2Al3
H3 16 MnCr 5 1.7131 1.7131 16 MnCr 5 16 MC 5 527 M 17 16 MnCr 5 SCR 415 2511 G51170
C 67S 1.1231 1.1231 Ck 67 XC 68 060 A 67 C 70 1770 G10700
C 75S 1.1248 1.1248 Ck 75 XC 75 060 A 78 C 75 1774, 1778 G10780
C 100S 1.1274 1.1274 Ck 101 060 A 96 SUP 4 1870 G10950
H5 C 105U 1.1545 1.1545 C 105 W1 Y1 105 C 100 KU 1880
1.2550 60 WCrV 7 55 WC 20 55 WCrV 8 KU
55 Cr 3 1.7176 1.7176 55 Cr 3 55 C 3 527 A 60 55 Cr 3 SUP 9 (A) 2253 G51550
107 CrV 3 1.2210 1.2210 115 CrV 3 100 C 3 107 CrV 3 KU T61202
1.2510 100 MnCrW 4 90 MWCV 5 BO 1 95 MnWCr 5 KU SKS 3 2140 T31501
H7
90 MnCrV 8 1.2842 1.2842 90 MnCrV 8 90 MV 8 BO 2 90 MnVCr 8 KU T31502
Mini-Shaft™
100 Cr 6 1.3505 1.3505 100 Cr 6 100 C 6 534 A 99 100 Cr 6 SUJ 2 2258 G51986
X 40 CrMoV 5 1 1.2344 1.2344 X 40 CrMoV 5 1 Z 40 CDV 5 BH 13 X 40 CrMo 5 1 1 KU SKD 61 2242 T20813
X 100 CrMoV 5 1.2363 1.2363 X 100 CrMoV 5 1 Z 100 CDV 5 BA 2 X 100 CrMoV 5 1 KU SKD 12 2260 T30102
X 155 CrVMo 12 1 1.2379 X 155 CrVMo 12 1 Z 160 CDV 12 BD 2 X 155 CrVMo 12 1 KU SKD 11 T30402
1.2436 X 210 CrW 12 X 215 CrW 12 1 KU SKD 2 2312
H8 1.2601 X 165 CrMoV 12 X 165 CrMoW 12 KU 2310
1.2713 55 NiCrMoV 6 55 NCDV 7 SKT 4 T61206
HS 6-5-2-5 1.3243 1.3243 S 6-5-2-5 Z 85 WDKCV 06-05-05-04-02 HS 6-5-2-5 SKH 55 2723
HS 2-10-1-8 1.3247 1.3247 S 2-10-1-8 Z 110 DKCWV 09-08- BM 42 HS 2-9-1-8 SKH 51 T11342
HS 18-0-1 1.3355 1.3355 S 18-0-1 Z 80 WCV 18-04-01 BT 1 HS 18-0-1 SKH 2 T12001
X 20 Cr 13 1.4021 1.4021 X 20 Cr 13 Z 20 C 13 420 S 37 X 20 Cr 13 SUS 420 J 1 2303 S42000
X 70 CrMo 15 1.4109 1.4109 X 65 CrMo 14 Z 70 D 14 SUS 440 A S44002
H11
X 90 CrMoV 18 1.4112 1.4112 X 90 CrMoV 18 Z 2 CND 18 05 409 S 19 X CrTi 12 SUS 440 B 2327 S44003
X 105 CrMo 17 1.4125 1.4125 X 105 CrMo 17 Z 100 CD 17 X 105 CrMo 17 SUS 440 C S44004
Thread milling

X 7 CrNiAl 17 7 1.4568 1.4568 X 7 CrNiAl 17 7 Z 9 CAN 17.7 301 S 81 X 7 CrNiAl 17 7 SUS 631 2388 S17700
X 8 CrNiMoAl 15 7 5 1.4574 1.4574 X 8 CrNiMoAl 15 7 5 S15700
H12
X 6 NiCrTiMoV 25 15 1.4980 1.4943 X 4 NiCrTi 25 15 Z 6 NCTDV 25.15 HR 51 SUH 660 2570 S66286
X 2 NiCoMoTi 18 12 4 1.6356 1.6356 X 2 NiCoMoTi 18 12 4 K93160
H21 X 120 Mn 12 1.3401 1.3401 X 120 Mn 12 Z 120 M 12 BW 10 SC MnH 1 2183
EN-GJN-HV520 0.9620 0.9620 G-X330 NiCr 4 2 FB Ni4 Cr2 BC Grade 2 A 05 12-00 F45001
H31 EN-GJN-HV550 0.9625 0.9625 G-X260 NiCr 4 2 FB Ni4 Cr2 HC Grade 2 B 05 13-00 F45000
EN-GJN-HV600(XCr11) 0.9630 0.9630 G-X300 CrNiSi 9 5 2 FB Cr9 Ni5 Grade 2 C, D, E 04 57-00 F45003
Thread tapping
Annex
488
www.secotools.com
SMG
Thread turning
Discalloy Precipitation hardened
Haynes 25
Stellite 21
Hastelloy C
KHN65MV Hastelloy C-276
IN 100
Inconel 718
Inconel X-750 Solution annealed
Nimonic 80A
René 41
Udimet 500
Waspalloy
Ti Commercially pure Ti (a)
AMS 4919 Ti 6-2-4-2 Annealed Ti (a)
AMS 4943 Ti 3Al-2.5V (grd 9) Annealed Ti (a+β)
AMS 4920, Grade 5 VT6 Ti 6Al-4V Annealed Ti (a+β)
MDT
AMS 4986 Ti 10V-2Fe-3Al Annealed Ti (β)
F.1516 5115 12KHN2 14 220 Case hardened
F.5103 1070 70 Quenched & Tempered
F.5107 1078, 1080 75 Quenched & Tempered
F.5117 1095 Quenched & Tempered
F.5118 W1 U10A Quenched & Tempered
S1 5KHV2SF Quenched & Tempered
F.1252 4142, 4140 38HM 15 142 Quenched & Tempered
F.520L L2 11KHF Quenched & Tempered
F.5220 O1 9KHVG Quenched & Tempered
O2 9G2F Quenched & Tempered
Mini-Shaft™
F.5230 52100 SHKH15 14 109 Quenched & Tempered
F.5318 H13 4KH5MF1S Quenched & Tempered
F.5227 A2 9KH5VF Quenched & Tempered
F.5211 D2 KH12MF Quenched & Tempered
F.5213 KH12 Quenched & Tempered
KH12MF Quenched & Tempered
F.520.S L6 5KHNM Quenched & Tempered
F.5613 M35 R6M5K5 Quenched & Tempered
M42 R2AM9K5 Quenched & Tempered
T1 R18 Quenched & Tempered
F.5261 420 20KH13 17 022 Quenched & Tempered Martensitic
440 A Quenched & Tempered Martensitic
440 B 95KH18 Quenched & Tempered Martensitic
440 C 95KH18 Quenched & Tempered Martensitic
Thread milling
AMS 5528 09KH17N7YU1 17-7 PH TH1050 Martensitic
632 PH 15-7 Mo TH1050 Martensitic
660 A286 Precipitation hardened Austenitic
AMS 6512 Marage 250 Precipitation hardened Martensitic
A128 Grade A Hadfield
A532 IB (NiCr-LC Ni-Hard 2 White cast iron
A532 IA (NiCr-HC) Ni-Hard 1 White cast iron
A532 ID (Ni-HiCr) Ni-Hard 4 White cast iron
Thread tapping
Annex
489
www.secotools.com
This work is published with the understanding that Seco Tools and its editors are supplying
information aimed to present a general orientation and direction of metal cutting and related
sciences. If professional services are required for specific applications, the assistance of an
appropriate professional should be acquired.
The information is provided “as is”;

Seco Tools and its editors disclaim all representations and warranties, express or implied, of any
kind, including, without limitations, any warranties of merchantability, fitness for a particular
purpose, title, or non-infringement. In no event will Seco Tools or its editors be liable to any
party for any direct, indirect, special or other consequential damages for any use of the
information, even if Seco Tools or its editors are advised of the possibility of such damage.
The information provided herein is for reference purposes only. Actual prices, specifications,
and product descriptions are finalised at the time of sale and may vary by location.
The information provided herein is subject to change without prior notice.
WWW.SECOTOOLS.COM
70025898, ST20236785 GB,
© SECO TOOLS AB, 2023. All rights reserved.
Technical specifications are subject to
change without notice.

GB Threading SN20232

Uploaded by

Copyright:

Available Formats

GB Threading SN20232

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GB Threading SN20232

Uploaded by

Copyright:

Available Formats

CATALOG &

Headquartered in Fagersta, Sweden and present in more than

For more than 80 years, the company has provided the

Thread milling shanks .............................................................................................. 241-247

Declaration of conformity .........................................................................................475-477

335.14-ER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 MTH-M003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437

C.-CNR/L-..HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85-91 MTH-P011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .435-436

CER/L...QHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69,123-124 MTH-S043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453

CFIR/L...JET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 MTP-M004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414

CNR/L…AHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-72 MTP-S001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420

GL..CNR/L..X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 MTS-K121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471

T34-R45HC, UNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375-376

09NR / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-136 20NR / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

13XMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 22ER/L / ..STACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

16ER/L / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-134 22NR/L / ..NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

16NR/L / ..A60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-131 26NR / ..ACME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

16NR/L / ..RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 27ER / ..ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-133

1. Insert clamping 2. External/Internal

Screw Clamp Pin

3. Cutting direction 4. Shank height

L R 00 = Round toolholders S & C

5. Shank width/diameter 6. Tool length

H = 100 mm (3.937”) Q = 180 mm (7.087”)

7. Cutting edge length 8. Other information

A = Steel with coolant passage

Example: H = High density bar

Cutting edge length = 16,5 mm (0.650”) HD = Heavy duty

1. Insert clamping 2. External/Internal

Screw Clamp Pin

7. Cutting edge length 8. Other information

A = Steel with coolant passage

Example: H = High density bar

Cutting edge length = 16,5 mm (0.650”) HD = Heavy duty

1. Cutting edge length 2. External/Internal

3. Cutting direction 4. Pitch

Full profile: (mm) 0,50 1,25 3,00 6,00

Full profile: (TPI) 48 18 11 6.0 2.5

Partial profile: A = 0,50-1,50 mm 48-16 TPI

G = 1,75-3,00 mm 14-8 TPI

5. Thread 6. Number of teeth per cutting edge/ Type of chipbreaker

API RD = API Round Casing

The application can be found at https://www.secotools.com/dashboard/Suggest/Suggest.

7. Selection of number of passes and infeed depths,

Ph 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0

3,82 3,52 3,19 2,87 2,53 2,23 1,92 1,60 1,25

1 (0.018) (0.017) (0.016) (0.015) (0.013) (0.013) (0.011) (0.011) (0.009)

-Right or left hand thread

Threading towards the chuck Threading away from the chuck*

Right-hand thread – Right-hand tool Left-hand thread – Right-hand tool

Left-hand thread – Left-hand tool Right-hand thread – Left-hand tool

Threading away Threading towards

Full profile Partial profile

Product strategy grades Grade assortment Snap-Tap®

Use the guidelines below to choose a suitable toolholder type.

Basic choice CER/L, PER/L

Basic choice CNR/L, PNR/L

Cx-CNR/L Insert size

With insert shim

N.B. On 27 mm inserts this angle is 10°