0% found this document useful (0 votes)
131 views8 pages

GE 50HP DC Motor

This document provides technical specifications for a 50 horsepower, 275 volt DC gantry motor with model number 5CD194UD819A800. The motor has a rated load of 147 amps at 1750 RPM, enclosed in a totally enclosed non-ventilated housing. Additional details include resistances, inductances, space heaters, and notes about mounting a brake assembly.

Uploaded by

Anthony Peters
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
131 views8 pages

GE 50HP DC Motor

This document provides technical specifications for a 50 horsepower, 275 volt DC gantry motor with model number 5CD194UD819A800. The motor has a rated load of 147 amps at 1750 RPM, enclosed in a totally enclosed non-ventilated housing. Additional details include resistances, inductances, space heaters, and notes about mounting a brake assembly.

Uploaded by

Anthony Peters
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

GE Industrial Systems

Friday, June 09, 2000

Technical Data Center Customer:


PO Box 2205
Fort Wayne, IN 46802-2205

DataPack Document, Version: v10006065.01

Customer Order: S.O. PRB604 GE Requisition: F47DP703650


Customer Part: 3110 DC GANTRY MOTOR GE Job Number: 000324673

MODEL NUMBER: 5CD194UD819A800

Outline Drawing: 36B467546AB004 Enclosure Mtg Assem: 36A167777ED010


Connection Diagram: 36A167900CB502 Instruction Book: GEH-3967
Horsepower: 50 RPM: 1750
Armature Volts: 275 Armature Amps: 147
Wound: SHUNT Type: CD368ATDY
Power Supply Code: C
Enclosure: TENV-WP Insulation Class: F
Duty: 60 MIN Ambient Max: 50 C
Rating Code: 194U1340-04 Field Volts: 240/120
2 2
K(V): 1.46 Cemf Volts/Radian/Sec WK : 22.20 Lb Ft
K(T): 1.02 Ft/Amp Year of Manufacture: 2000
Minimum Ambient: 0C Max Altitude: 3300 Ft.

Resistances at 25 Degrees C: Inductance’s:


Shunt Field: 89.8 OHMS Armature Circuit Total: .860 mH Saturated
Armature: .0264 OHMS Shunt Field: 76.0 Henries Sat
Commutator Field: .0085 OHMS

Shunt Field Data:


Shunt Field Current(1): 2 AMPS at Rated Load and 1750 RPM

Additional Drawings: Description:


886A611AC001 SUPPLEMENTARY OUTLINE FOR CONDUIT BOX.
36B468990AC901 OUTLINE-FIXED TERMINATION
36A178271CF001 OUTLINE- BUBENZER BRAKE SB17MX133-355-20 - 133 DISK BRAKE
NX84-355-20 HUB - BRAKE RELEASED LIMIT SWITCH, 1 NO, 1 NC -
FULL MANUAL RELEASE - MAX BRAKE TORQUE 370 LB-FT -
MAX SPEED 2100 RPM - DC COIL VOLTAGE 180 VDC -

Additionial Machine Notes:


TOTALLY ENCLOSED NON VENTILATED - BALL BEARINGS
CONDUIT BOX ON RIGHT HAND SIDE FACING COMMUTATOR END
STANDARD SHAFT DRIVE END - STANDARD SHAFT COMMUTATOR END -
WITHOUT FEET
BRAKE ADAPTER AND HUB WILL BE MOUNTED TO THE MOTOR.
THE BALANCE OF BRAKE PARTS WILL BE SHIPPED LOOSE WITH
THE MOTOR.
WITH:
SPACE HEATERS: 180 WATTS-120 VOLTS-1 PHASE
THERMOSTAT- NORMALLY CLOSED, AC RATING- 600V MAX-
Page 2
GE Industrial Systems
Friday, June 09, 2000

Technical Data Center Customer:


PO Box 2205
Fort Wayne, IN 46802-2205

DataPack Document, Version: v10006065.01

.5A, 250V-1.5A, OR 125V-3A- DC RATING- 30V MAX-


1.5A. MAXIMUM CURRENT BASED ON INDUCTIVE LOADS UP
TO AND INCLUDING NEMA NO. 5 CONTACTOR.

Marks
GANTRY, ITEM 3110

Page 3
Model Number: 5CD194UD819A800 Certified Print Friday, June 09, 2000
Page 4
Model Number: 5CD194UD819A800 Certified Print Friday, June 09, 2000

Page 5
Model Number: 5CD194UD819A800 Certified Print Friday, June 09, 2000

Page 6
Model Number: 5CD194UD819A800 Certified Print Friday, June 09, 2000

Page 7
Model Number: 5CD194UD819A800 Certified Print Friday, June 09, 2000
Page 8
Model Number: 5CD194UD819A800 Certified Print Friday, June 09, 2000
Page 9

You might also like