Scribd
Upload
89 views1 page

Startup

The document is a startup inspection and warranty registration form for a piece of construction equipment. It lists information such as the equipment model, serial number, hour meter reading, and customer details. It outlines items to inspect like fluid levels, belts, tires, safety systems, and brakes. It also notes providing training to the customer on operation, safety measures, and correct procedures. The customer signs to verify receiving the equipment in good working condition and being instructed on the checklist items, starting the warranty.

Uploaded by

bundajoseph148
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views1 page

Startup

The document is a startup inspection and warranty registration form for a piece of construction equipment. It lists information such as the equipment model, serial number, hour meter reading, and customer details. It outlines items to inspect like fluid levels, belts, tires, safety systems, and brakes. It also notes providing training to the customer on operation, safety measures, and correct procedures. The customer signs to verify receiving the equipment in good working condition and being instructed on the checklist items, starting the warranty.

Uploaded by

bundajoseph148
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

START-UP INSPECTION/

LOADERS WARRANTY REGISTRATION


DUMP TRUCKS
Sold Leased

Equipment model LH514 Serial number L014D1035

Customer

Sales Company/
Distributor
Hour meter
Tires reading at delivery

Review with customer’s representative/operator Perform with customer’s representative/operator


Contents of operating, maintenance and safety instructions Drain fuel filters
Spare parts book and ordering of spares, warranty terms Grease all lubricating nipples
Lubrication specification Fill fuel tank and grease tank*
All greasing points
Controls and instruments
Brake systems
Recommended procedure for starting and stopping

Inspect with customer’s representative/operator Oil levels


Engine intake filter Engine
Sandvik Mining and Construction Oy Warranty Handler, Turku

Tightness of V-belts Transmission


Tire pressures Bucket (dump box) and steering hydraulics
All oil circuitry for leaks Axle differentials and wheel hubs
Machine protection and safety system Brakes*
Operation instructions in machine Other*

Give training to customer’s representatives/operator Aftermarket additions and modifications


Emphasize safety measures
Start engine and check all hydraulic movements and instruments
Check all brakes function as designed and carry out efficiency test
Check RRC for correct and safe function*
Instruct on correct driving and loading procedures

ALWAYS REPORT:
Shortcomings in safety No Yes,
Customer request for further training No Yes,
Specification of training needs
REMARKS

This is to verify that I have received the machine in good and safe working condition and that I have been instructed in all items indicated and
checked off in the checklist above. Machine warranty begins from the date of signature.

Date ____ / ________ Customer signature _____________________________ Representative signature __________________________

Names in block letters ______________________________ _________________________


* if applicable

Mailing Address Street Address Telephone Telefax


Sandvik Mining and Construction Oy Sandvik Mining and Construction Oy +358 205 44 131 Marketing, Finance +358 205 44 130
Loaders Turku Loaders Turku Domicile Parts, Service +358 205 44 5355
P.O.Box 434 Vahdontie 19 Tampere, Finland Procurement, Production +358 205 44 5465
FI-20101 Turku FI-20360 Turku Business ID: R&D +358 205 44 5555
Finland Finland 02116007

You might also like