Classification: Reference: Date:
AT23-002 NTB23-048 June 2, 2023
DTC P17F4 STORED IN TCM
APPLIED VEHICLES: 2018-2022 Kicks (P15)
2020-2022 Versa (N18)
APPLIED DATES: 2018-2021 Kicks – All
2022 Kicks – Built on or before February 18, 2022
2020-2021 Versa – All
2022 Versa – Built on or before February 18, 2022
APPLIED TRANSMISSIONS: RE0F11B
IF YOU CONFIRM
The customer reports transmission vibration when accelerating,
HINT: Vibration occurs during quick reacceleration after braking, during a 2-1
downshift of the auxiliary gearbox.
AND
DTC P17F4 for “AUXILIARY GEARBOX (CL JUDDER)” is stored in the TCM.
If DTCs other than P17F4 are stored, this bulletin does not apply. Refer to the
ESM for further diagnostic information.
ACTION
Refer to the Repair Overview on page 2 to determine if this bulletin applies.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/8
Repair Overview
The customer reports transmission vibration when This bulletin
No
accelerating. does not apply
Yes
Diagnose the reason for the MIL.
HINT: P17F4 does not set a MIL
Is the MIL ON? Yes
DTCs other than P17F4 are not
cover by this bulletin.
No
Is P17F4 the only DTC
stored in the TCM? Diagnose and resolve all other
HINT: For 2018-2019 DTCs first.
No
Kicks, if P17F4 is not DTCs other than P17F4 are not
stored in TCM see covered by this bulletin.
NTB20-060
Yes
Replace
Is the upshift count the CVT Fluid only.
viewed in the TCM See Service Repairs
Data Monitor “65000” on page 7.
or more? See (TBD) 1- No
IMPORTANT: Refer to
2 Shifting Times the ESM for the correct
Count on page 3. CVT fluid replacement
procedure.
Yes
Replace the CVT.
See Service Repair
on page 7.
2/8 NTB23-048
SERVICE PROCEDURE
(TBD) 1-2 Shifting Times Count
Do not perform steps 1-11 unless directed to do so by the Repair Overview on page 2.
1. Turn the ignition ON with the engine OFF.
2. Start CONSULT-III plus on the CONSULT PC.
3. If prompted, select USA/CANADA Dealers from the drop-down menu, and then
select OK.
4. Login using your NNAnet credentials.
IMPORTANT: If not prompted to enter your username and password, the CONSULT
PC may not be connected to Wi-Fi. Close C-III plus, confirm the CONSULT PC is
connected to Wi-Fi, and then reopen C-III plus.
5. Wait for the VI to be recognized (Figure 1).
The serial number will be displayed when the VI is recognized.
VI is
recognized
Figure 1
3/8 NTB23-048
6. Select Diagnosis (One System).
Figure 2
7. Select TRANSMISSION.
Figure 3
4/8 NTB23-048
8. Select Data Monitor.
Figure 4
9. Use the arrows to scroll through the Monitor Menu pages until (TBD) 1-2 shifting
times is found.
10. Select (TBD) 1-2 shifting times, and then select Start.
Figure 5
5/8 NTB23-048
11. Verify the “count” (Figure 6).
Is the (TBD)times count “65000” or more?
Yes: See Replace CVT on page 7.
No: See Replace the CVT Fluid Only on page 7.
Count
EXAMPLE ONLY
Figure 6
6/8 NTB23-048
Service Repairs
Replace the CVT Fluid Only
If Repair Overview directs that only a CVT Fluid replacement is required:
a. Refer to the ESM: TRANSMISSION & DRIVELINE > TRANSAXLE &
TRANSMISSION > CVT: RE0F11B > PERIODIC MAINTENANCE > CVT
FLUID > Replacement
b. Using C-III plus, erase the “CONFORM CVTF DETERIORTN” memory.
Replace CVT
If Repair Overview directs that the CVT must be replaced:
a. To replace the CVT, refer to the ESM: TRANSMISSION & DRIVELINE >
TRANSAXLE & TRANSMISSION > CVT: RE0F11B > UNIT REMOVAL AND
INSTALLATION > TRANSMISSION ASSEMBLY > Removal and Installation
b. Perform required additional services when replacing a CVT, refer to the ESM:
TRANSMISSION & DRIVELINE > TRANSAXLE & TRANSMISSION > CVT:
RE0F11B > BASIC INSPECTION > ADDITIONAL SERVICE WHEN
REPLACING TRANSAXLE ASSEMBLY > Description
7/8 NTB23-048
PARTS INFORMATION
DESCRIPTION PART NUMBER QUANTITY
1
CVT Assembly (1)
If needed
Nissan NS-3 CVT Fluid 999MP-CV0NS3 (2) As needed
Washer-Drain 11026 1
(1) Use the vehicle VIN to look up the CVT Assembly in the electronic parts catalog.
(2) Order this item through the Nissan Maintenance Advantage program: Phone 877-NIS-
NMA1 (877-647-6621). Website order via link on the dealer portal; www.NNAnet.com
and click on the “Maintenance Advantage-Tire/Battery/Chemical” link.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION PFP OP CODE SYM DIA FRT
Perform CVT Fluid Replacement Only (1) JX1LAA ZE 32 1.5
(1) Reference the electronic parts catalog and use the CVT Assembly as the Primary
Failed Part (PFP).
If Aux Gearbox Shift Count is 65000 or above
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION PFP OP CODE SYM DIA FRT
JD01AA
R & R CVT (1) ZE 32 (2)
JD023A
(1) Reference the electronic parts catalog and use the CVT Assembly as the Primary
Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE DESCRIPTION
June 2, 2023 NTB23-048 Original bulletin published
8/8 NTB23-048
