Scribd
Upload
992 views1 page

HIRA of Welding Work.

The document assesses risks associated with welding work. It identifies hazards like electrocution, fire, smoke/sparks. It rates the risks and outlines control measures to reduce risks like using proper PPE, fire extinguishers, restricting work in wet/enclosed areas, and close supervision.

Uploaded by

Gyanendra Srivastava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
992 views1 page

HIRA of Welding Work.

The document assesses risks associated with welding work. It identifies hazards like electrocution, fire, smoke/sparks. It rates the risks and outlines control measures to reduce risks like using proper PPE, fire extinguishers, restricting work in wet/enclosed areas, and close supervision.

Uploaded by

Gyanendra Srivastava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Risk Assessment Of Welding Work.

Resultant Risk Additional Control Resultant


Sr No. Sub activity Hazards Risk Severity Probability Control Measure Severity Probability Risk Level
Risk Level Measures Risk
1.Assure no welding work on wet location.
1.Close supervision.
2. Welding machine must be check before 2.Job specific training
use. given.
1.Elctrocude.
3. All electrical connection must be route 3.TBT given.
2.Fire burnt.
1 Welding work. 1.Electrocution 4 3 12 H from RCCB. 4.All electrical cable and 4 1 4 L
3.Property
Damage 4.Fire extingushet to be present lead shall be free from
near hot work area. damage.
5. Job specific PPE used. 5.Dployment of trained
worker.
1. Housekeeping shall be insured. 4.Fire cylinder must be
2.Job specific PPE's used. available.
1.Major/ Minor 3.Work 5.Fire blanket used in
2.Fire 4 3 12 H area free from combustable material. case work at height. 4 1 4 L
body injury.

1.Barricade the work area with


1.Eye injury. 1.Roate the duties of the welder. fire blanket to prevent the
2.Inhaling of toxic 2.No welding work on enclosed flying fire spark.
3.Smoke/Spark of the
smoke lead to 4 4 16 E area. 3. Installed the 2.Job specific PPE to be 4 1 4 L
welding work.
breathing exaust fan if necessary. 4.close used. 3.Peridocaly health
difficulty. supervision. monitoring to be done of
welder.

You might also like